linux/arch/mips/ddb5xxx/ddb5476/irq.c

144 lines
4.5 KiB
C

/*
* arch/mips/ddb5476/irq.c -- NEC DDB Vrc-5476 interrupt routines
*
* Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
* Sony Software Development Center Europe (SDCE), Brussels
*
* Re-write the whole thing to use new irq.c file.
* Copyright (C) 2001 MontaVista Software Inc.
* Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
*
*/
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <asm/i8259.h>
#include <asm/io.h>
#include <asm/ptrace.h>
#include <asm/ddb5xxx/ddb5xxx.h>
#define M1543_PNP_CONFIG 0x03f0 /* PnP Config Port */
#define M1543_PNP_INDEX 0x03f0 /* PnP Index Port */
#define M1543_PNP_DATA 0x03f1 /* PnP Data Port */
#define M1543_PNP_ALT_CONFIG 0x0370 /* Alternative PnP Config Port */
#define M1543_PNP_ALT_INDEX 0x0370 /* Alternative PnP Index Port */
#define M1543_PNP_ALT_DATA 0x0371 /* Alternative PnP Data Port */
#define M1543_INT1_MASTER_CTRL 0x0020 /* INT_1 (master) Control Register */
#define M1543_INT1_MASTER_MASK 0x0021 /* INT_1 (master) Mask Register */
#define M1543_INT1_SLAVE_CTRL 0x00a0 /* INT_1 (slave) Control Register */
#define M1543_INT1_SLAVE_MASK 0x00a1 /* INT_1 (slave) Mask Register */
#define M1543_INT1_MASTER_ELCR 0x04d0 /* INT_1 (master) Edge/Level Control */
#define M1543_INT1_SLAVE_ELCR 0x04d1 /* INT_1 (slave) Edge/Level Control */
static void m1543_irq_setup(void)
{
/*
* The ALI M1543 has 13 interrupt inputs, IRQ1..IRQ13. Not all
* the possible IO sources in the M1543 are in use by us. We will
* use the following mapping:
*
* IRQ1 - keyboard (default set by M1543)
* IRQ3 - reserved for UART B (default set by M1543) (note that
* the schematics for the DDB Vrc-5476 board seem to
* indicate that IRQ3 is connected to the DS1386
* watchdog timer interrupt output so we might have
* a conflict)
* IRQ4 - reserved for UART A (default set by M1543)
* IRQ5 - parallel (default set by M1543)
* IRQ8 - DS1386 time of day (RTC) interrupt
* IRQ9 - USB (hardwired in ddb_setup)
* IRQ10 - PMU (hardwired in ddb_setup)
* IRQ12 - mouse
* IRQ14,15 - IDE controller (need to be confirmed, jsun)
*/
/*
* Assing mouse interrupt to IRQ12
*/
/* Enter configuration mode */
outb(0x51, M1543_PNP_CONFIG);
outb(0x23, M1543_PNP_CONFIG);
/* Select logical device 7 (Keyboard) */
outb(0x07, M1543_PNP_INDEX);
outb(0x07, M1543_PNP_DATA);
/* Select IRQ12 */
outb(0x72, M1543_PNP_INDEX);
outb(0x0c, M1543_PNP_DATA);
/* Leave configration mode */
outb(0xbb, M1543_PNP_CONFIG);
}
static void nile4_irq_setup(void)
{
int i;
/* Map all interrupts to CPU int #0 (IP2) */
nile4_map_irq_all(0);
/* PCI INTA#-E# must be level triggered */
nile4_set_pci_irq_level_or_edge(0, 1);
nile4_set_pci_irq_level_or_edge(1, 1);
nile4_set_pci_irq_level_or_edge(2, 1);
nile4_set_pci_irq_level_or_edge(3, 1);
/* PCI INTA#, B#, D# must be active low, INTC# must be active high */
nile4_set_pci_irq_polarity(0, 0);
nile4_set_pci_irq_polarity(1, 0);
nile4_set_pci_irq_polarity(2, 1);
nile4_set_pci_irq_polarity(3, 0);
for (i = 0; i < 16; i++)
nile4_clear_irq(i);
/* Enable CPU int #0 */
nile4_enable_irq_output(0);
/* memory resource acquire in ddb_setup */
}
static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL };
static struct irqaction irq_error = { no_action, 0, CPU_MASK_NONE, "error", NULL, NULL };
extern asmlinkage void ddb5476_handle_int(void);
extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
extern void mips_cpu_irq_init(u32 irq_base);
extern void vrc5476_irq_init(u32 irq_base);
void __init arch_init_irq(void)
{
/* hardware initialization */
nile4_irq_setup();
m1543_irq_setup();
/* controller setup */
init_i8259_irqs();
vrc5476_irq_init(VRC5476_IRQ_BASE);
mips_cpu_irq_init(CPU_IRQ_BASE);
/* setup cascade interrupts */
setup_irq(VRC5476_IRQ_BASE + VRC5476_I8259_CASCADE, &irq_cascade);
setup_irq(CPU_IRQ_BASE + CPU_VRC5476_CASCADE, &irq_cascade);
/* setup error interrupts for debugging */
setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_CPCE, &irq_error);
setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_CNTD, &irq_error);
setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_MCE, &irq_error);
setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_LBRT, &irq_error);
setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_PCIS, &irq_error);
setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_PCI, &irq_error);
/* setup the grandpa intr vector */
set_except_vector(0, ddb5476_handle_int);
}