linux/drivers/net/sfc/i2c-direct.c
Ben Hutchings 8ceee660aa New driver "sfc" for Solarstorm SFC4000 controller.
The driver supports the 10Xpress PHY and XFP modules on our reference
designs SFE4001 and SFE4002 and the SMC models SMC10GPCIe-XFP and
SMC10GPCIe-10BT.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-29 01:42:43 -04:00

381 lines
8.7 KiB
C

/****************************************************************************
* Driver for Solarflare Solarstorm network controllers and boards
* Copyright 2005 Fen Systems Ltd.
* Copyright 2006-2008 Solarflare Communications Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation, incorporated herein by reference.
*/
#include <linux/delay.h>
#include "net_driver.h"
#include "i2c-direct.h"
/*
* I2C data (SDA) and clock (SCL) line read/writes with appropriate
* delays.
*/
static inline void setsda(struct efx_i2c_interface *i2c, int state)
{
udelay(i2c->op->udelay);
i2c->sda = state;
i2c->op->setsda(i2c);
udelay(i2c->op->udelay);
}
static inline void setscl(struct efx_i2c_interface *i2c, int state)
{
udelay(i2c->op->udelay);
i2c->scl = state;
i2c->op->setscl(i2c);
udelay(i2c->op->udelay);
}
static inline int getsda(struct efx_i2c_interface *i2c)
{
int sda;
udelay(i2c->op->udelay);
sda = i2c->op->getsda(i2c);
udelay(i2c->op->udelay);
return sda;
}
static inline int getscl(struct efx_i2c_interface *i2c)
{
int scl;
udelay(i2c->op->udelay);
scl = i2c->op->getscl(i2c);
udelay(i2c->op->udelay);
return scl;
}
/*
* I2C low-level protocol operations
*
*/
static inline void i2c_release(struct efx_i2c_interface *i2c)
{
EFX_WARN_ON_PARANOID(!i2c->scl);
EFX_WARN_ON_PARANOID(!i2c->sda);
/* Devices may time out if operations do not end */
setscl(i2c, 1);
setsda(i2c, 1);
EFX_BUG_ON_PARANOID(getsda(i2c) != 1);
EFX_BUG_ON_PARANOID(getscl(i2c) != 1);
}
static inline void i2c_start(struct efx_i2c_interface *i2c)
{
/* We may be restarting immediately after a {send,recv}_bit,
* so SCL will not necessarily already be high.
*/
EFX_WARN_ON_PARANOID(!i2c->sda);
setscl(i2c, 1);
setsda(i2c, 0);
setscl(i2c, 0);
setsda(i2c, 1);
}
static inline void i2c_send_bit(struct efx_i2c_interface *i2c, int bit)
{
EFX_WARN_ON_PARANOID(i2c->scl != 0);
setsda(i2c, bit);
setscl(i2c, 1);
setscl(i2c, 0);
setsda(i2c, 1);
}
static inline int i2c_recv_bit(struct efx_i2c_interface *i2c)
{
int bit;
EFX_WARN_ON_PARANOID(i2c->scl != 0);
EFX_WARN_ON_PARANOID(!i2c->sda);
setscl(i2c, 1);
bit = getsda(i2c);
setscl(i2c, 0);
return bit;
}
static inline void i2c_stop(struct efx_i2c_interface *i2c)
{
EFX_WARN_ON_PARANOID(i2c->scl != 0);
setsda(i2c, 0);
setscl(i2c, 1);
setsda(i2c, 1);
}
/*
* I2C mid-level protocol operations
*
*/
/* Sends a byte via the I2C bus and checks for an acknowledgement from
* the slave device.
*/
static int i2c_send_byte(struct efx_i2c_interface *i2c, u8 byte)
{
int i;
/* Send byte */
for (i = 0; i < 8; i++) {
i2c_send_bit(i2c, !!(byte & 0x80));
byte <<= 1;
}
/* Check for acknowledgement from slave */
return (i2c_recv_bit(i2c) == 0 ? 0 : -EIO);
}
/* Receives a byte via the I2C bus and sends ACK/NACK to the slave device. */
static u8 i2c_recv_byte(struct efx_i2c_interface *i2c, int ack)
{
u8 value = 0;
int i;
/* Receive byte */
for (i = 0; i < 8; i++)
value = (value << 1) | i2c_recv_bit(i2c);
/* Send ACK/NACK */
i2c_send_bit(i2c, (ack ? 0 : 1));
return value;
}
/* Calculate command byte for a read operation */
static inline u8 i2c_read_cmd(u8 device_id)
{
return ((device_id << 1) | 1);
}
/* Calculate command byte for a write operation */
static inline u8 i2c_write_cmd(u8 device_id)
{
return ((device_id << 1) | 0);
}
int efx_i2c_check_presence(struct efx_i2c_interface *i2c, u8 device_id)
{
int rc;
/* If someone is driving the bus low we just give up. */
if (getsda(i2c) == 0 || getscl(i2c) == 0) {
EFX_ERR(i2c->efx, "%s someone is holding the I2C bus low."
" Giving up.\n", __func__);
return -EFAULT;
}
/* Pretend to initiate a device write */
i2c_start(i2c);
rc = i2c_send_byte(i2c, i2c_write_cmd(device_id));
if (rc)
goto out;
out:
i2c_stop(i2c);
i2c_release(i2c);
return rc;
}
/* This performs a fast read of one or more consecutive bytes from an
* I2C device. Not all devices support consecutive reads of more than
* one byte; for these devices use efx_i2c_read() instead.
*/
int efx_i2c_fast_read(struct efx_i2c_interface *i2c,
u8 device_id, u8 offset, u8 *data, unsigned int len)
{
int i;
int rc;
EFX_WARN_ON_PARANOID(getsda(i2c) != 1);
EFX_WARN_ON_PARANOID(getscl(i2c) != 1);
EFX_WARN_ON_PARANOID(data == NULL);
EFX_WARN_ON_PARANOID(len < 1);
/* Select device and starting offset */
i2c_start(i2c);
rc = i2c_send_byte(i2c, i2c_write_cmd(device_id));
if (rc)
goto out;
rc = i2c_send_byte(i2c, offset);
if (rc)
goto out;
/* Read data from device */
i2c_start(i2c);
rc = i2c_send_byte(i2c, i2c_read_cmd(device_id));
if (rc)
goto out;
for (i = 0; i < (len - 1); i++)
/* Read and acknowledge all but the last byte */
data[i] = i2c_recv_byte(i2c, 1);
/* Read last byte with no acknowledgement */
data[i] = i2c_recv_byte(i2c, 0);
out:
i2c_stop(i2c);
i2c_release(i2c);
return rc;
}
/* This performs a fast write of one or more consecutive bytes to an
* I2C device. Not all devices support consecutive writes of more
* than one byte; for these devices use efx_i2c_write() instead.
*/
int efx_i2c_fast_write(struct efx_i2c_interface *i2c,
u8 device_id, u8 offset,
const u8 *data, unsigned int len)
{
int i;
int rc;
EFX_WARN_ON_PARANOID(getsda(i2c) != 1);
EFX_WARN_ON_PARANOID(getscl(i2c) != 1);
EFX_WARN_ON_PARANOID(len < 1);
/* Select device and starting offset */
i2c_start(i2c);
rc = i2c_send_byte(i2c, i2c_write_cmd(device_id));
if (rc)
goto out;
rc = i2c_send_byte(i2c, offset);
if (rc)
goto out;
/* Write data to device */
for (i = 0; i < len; i++) {
rc = i2c_send_byte(i2c, data[i]);
if (rc)
goto out;
}
out:
i2c_stop(i2c);
i2c_release(i2c);
return rc;
}
/* I2C byte-by-byte read */
int efx_i2c_read(struct efx_i2c_interface *i2c,
u8 device_id, u8 offset, u8 *data, unsigned int len)
{
int rc;
/* i2c_fast_read with length 1 is a single byte read */
for (; len > 0; offset++, data++, len--) {
rc = efx_i2c_fast_read(i2c, device_id, offset, data, 1);
if (rc)
return rc;
}
return 0;
}
/* I2C byte-by-byte write */
int efx_i2c_write(struct efx_i2c_interface *i2c,
u8 device_id, u8 offset, const u8 *data, unsigned int len)
{
int rc;
/* i2c_fast_write with length 1 is a single byte write */
for (; len > 0; offset++, data++, len--) {
rc = efx_i2c_fast_write(i2c, device_id, offset, data, 1);
if (rc)
return rc;
mdelay(i2c->op->mdelay);
}
return 0;
}
/* This is just a slightly neater wrapper round efx_i2c_fast_write
* in the case where the target doesn't take an offset
*/
int efx_i2c_send_bytes(struct efx_i2c_interface *i2c,
u8 device_id, const u8 *data, unsigned int len)
{
return efx_i2c_fast_write(i2c, device_id, data[0], data + 1, len - 1);
}
/* I2C receiving of bytes - does not send an offset byte */
int efx_i2c_recv_bytes(struct efx_i2c_interface *i2c, u8 device_id,
u8 *bytes, unsigned int len)
{
int i;
int rc;
EFX_WARN_ON_PARANOID(getsda(i2c) != 1);
EFX_WARN_ON_PARANOID(getscl(i2c) != 1);
EFX_WARN_ON_PARANOID(len < 1);
/* Select device */
i2c_start(i2c);
/* Read data from device */
rc = i2c_send_byte(i2c, i2c_read_cmd(device_id));
if (rc)
goto out;
for (i = 0; i < (len - 1); i++)
/* Read and acknowledge all but the last byte */
bytes[i] = i2c_recv_byte(i2c, 1);
/* Read last byte with no acknowledgement */
bytes[i] = i2c_recv_byte(i2c, 0);
out:
i2c_stop(i2c);
i2c_release(i2c);
return rc;
}
/* SMBus and some I2C devices will time out if the I2C clock is
* held low for too long. This is most likely to happen in virtualised
* systems (when the entire domain is descheduled) but could in
* principle happen due to preemption on any busy system (and given the
* potential length of an I2C operation turning preemption off is not
* a sensible option). The following functions deal with the failure by
* retrying up to a fixed number of times.
*/
#define I2C_MAX_RETRIES (10)
/* The timeout problem will result in -EIO. If the wrapped function
* returns any other error, pass this up and do not retry. */
#define RETRY_WRAPPER(_f) \
int retries = I2C_MAX_RETRIES; \
int rc; \
while (retries) { \
rc = _f; \
if (rc != -EIO) \
return rc; \
retries--; \
} \
return rc; \
int efx_i2c_check_presence_retry(struct efx_i2c_interface *i2c, u8 device_id)
{
RETRY_WRAPPER(efx_i2c_check_presence(i2c, device_id))
}
int efx_i2c_read_retry(struct efx_i2c_interface *i2c,
u8 device_id, u8 offset, u8 *data, unsigned int len)
{
RETRY_WRAPPER(efx_i2c_read(i2c, device_id, offset, data, len))
}
int efx_i2c_write_retry(struct efx_i2c_interface *i2c,
u8 device_id, u8 offset, const u8 *data, unsigned int len)
{
RETRY_WRAPPER(efx_i2c_write(i2c, device_id, offset, data, len))
}