linux/arch/mips/pci/pci-ddb5074.c
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

79 lines
1.9 KiB
C

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <asm/debug.h>
#include <asm/ddb5xxx/ddb5xxx.h>
static struct resource extpci_io_resource = {
"pci IO space",
0x1000, /* leave some room for ISA bus */
DDB_PCI_IO_SIZE - 1,
IORESOURCE_IO
};
static struct resource extpci_mem_resource = {
"pci memory space",
DDB_PCI_MEM_BASE + 0x00100000, /* leave 1 MB for RTC */
DDB_PCI_MEM_BASE + DDB_PCI_MEM_SIZE - 1,
IORESOURCE_MEM
};
extern struct pci_ops ddb5476_ext_pci_ops;
struct pci_controller ddb5476_controller = {
.pci_ops = &ddb5476_ext_pci_ops,
.io_resource = &extpci_io_resource,
.mem_resource = &extpci_mem_resource,
};
#define PCI_EXT_INTA 8
#define PCI_EXT_INTB 9
#define PCI_EXT_INTC 10
#define PCI_EXT_INTD 11
#define PCI_EXT_INTE 12
#define MAX_SLOT_NUM 14
static unsigned char irq_map[MAX_SLOT_NUM] = {
[ 0] = nile4_to_irq(PCI_EXT_INTE),
[ 1] = nile4_to_irq(PCI_EXT_INTA),
[ 2] = nile4_to_irq(PCI_EXT_INTA),
[ 3] = nile4_to_irq(PCI_EXT_INTB),
[ 4] = nile4_to_irq(PCI_EXT_INTC),
[ 5] = nile4_to_irq(NILE4_INT_UART),
[10] = nile4_to_irq(PCI_EXT_INTE),
[13] = nile4_to_irq(PCI_EXT_INTE),
};
int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
return irq_map[slot];
}
/* Do platform specific device initialization at pci_enable_device() time */
int pcibios_plat_dev_init(struct pci_dev *dev)
{
return 0;
}
void __init ddb_pci_reset_bus(void)
{
u32 temp;
/*
* I am not sure about the "official" procedure, the following
* steps work as far as I know:
* We first set PCI cold reset bit (bit 31) in PCICTRL-H.
* Then we clear the PCI warm reset bit (bit 30) to 0 in PCICTRL-H.
* The same is true for both PCI channels.
*/
temp = ddb_in32(DDB_PCICTRL + 4);
temp |= 0x80000000;
ddb_out32(DDB_PCICTRL + 4, temp);
temp &= ~0xc0000000;
ddb_out32(DDB_PCICTRL + 4, temp);
}