linux/arch/s390/kernel/base.S
Heiko Carstens a53c8fab3f s390/comments: unify copyright messages and remove file names
Remove the file name from the comment at top of many files. In most
cases the file name was wrong anyway, so it's rather pointless.

Also unify the IBM copyright statement. We did have a lot of sightly
different statements and wanted to change them one after another
whenever a file gets touched. However that never happened. Instead
people start to take the old/"wrong" statements to use as a template
for new files.
So unify all of them in one go.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2012-07-20 11:15:04 +02:00

206 lines
4.2 KiB
ArmAsm

/*
* arch/s390/kernel/base.S
*
* Copyright IBM Corp. 2006, 2007
* Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
* Michael Holzheu <holzheu@de.ibm.com>
*/
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/ptrace.h>
#include <asm/sigp.h>
#ifdef CONFIG_64BIT
ENTRY(s390_base_mcck_handler)
basr %r13,0
0: lg %r15,__LC_PANIC_STACK # load panic stack
aghi %r15,-STACK_FRAME_OVERHEAD
larl %r1,s390_base_mcck_handler_fn
lg %r1,0(%r1)
ltgr %r1,%r1
jz 1f
basr %r14,%r1
1: la %r1,4095
lmg %r0,%r15,__LC_GPREGS_SAVE_AREA-4095(%r1)
lpswe __LC_MCK_OLD_PSW
.section .bss
.align 8
.globl s390_base_mcck_handler_fn
s390_base_mcck_handler_fn:
.quad 0
.previous
ENTRY(s390_base_ext_handler)
stmg %r0,%r15,__LC_SAVE_AREA_ASYNC
basr %r13,0
0: aghi %r15,-STACK_FRAME_OVERHEAD
larl %r1,s390_base_ext_handler_fn
lg %r1,0(%r1)
ltgr %r1,%r1
jz 1f
basr %r14,%r1
1: lmg %r0,%r15,__LC_SAVE_AREA_ASYNC
ni __LC_EXT_OLD_PSW+1,0xfd # clear wait state bit
lpswe __LC_EXT_OLD_PSW
.section .bss
.align 8
.globl s390_base_ext_handler_fn
s390_base_ext_handler_fn:
.quad 0
.previous
ENTRY(s390_base_pgm_handler)
stmg %r0,%r15,__LC_SAVE_AREA_SYNC
basr %r13,0
0: aghi %r15,-STACK_FRAME_OVERHEAD
larl %r1,s390_base_pgm_handler_fn
lg %r1,0(%r1)
ltgr %r1,%r1
jz 1f
basr %r14,%r1
lmg %r0,%r15,__LC_SAVE_AREA_SYNC
lpswe __LC_PGM_OLD_PSW
1: lpswe disabled_wait_psw-0b(%r13)
.align 8
disabled_wait_psw:
.quad 0x0002000180000000,0x0000000000000000 + s390_base_pgm_handler
.section .bss
.align 8
.globl s390_base_pgm_handler_fn
s390_base_pgm_handler_fn:
.quad 0
.previous
#
# Calls diag 308 subcode 1 and continues execution
#
# The following conditions must be ensured before calling this function:
# * Prefix register = 0
# * Lowcore protection is disabled
#
ENTRY(diag308_reset)
larl %r4,.Lctlregs # Save control registers
stctg %c0,%c15,0(%r4)
larl %r4,.Lfpctl # Floating point control register
stfpc 0(%r4)
larl %r4,.Lcontinue_psw # Save PSW flags
epsw %r2,%r3
stm %r2,%r3,0(%r4)
larl %r4,.Lrestart_psw # Setup restart PSW at absolute 0
lghi %r3,0
lg %r4,0(%r4) # Save PSW
sturg %r4,%r3 # Use sturg, because of large pages
lghi %r1,1
diag %r1,%r1,0x308
.Lrestart_part2:
lhi %r0,0 # Load r0 with zero
lhi %r1,2 # Use mode 2 = ESAME (dump)
sigp %r1,%r0,SIGP_SET_ARCHITECTURE # Switch to ESAME mode
sam64 # Switch to 64 bit addressing mode
larl %r4,.Lctlregs # Restore control registers
lctlg %c0,%c15,0(%r4)
larl %r4,.Lfpctl # Restore floating point ctl register
lfpc 0(%r4)
larl %r4,.Lcontinue_psw # Restore PSW flags
lpswe 0(%r4)
.Lcontinue:
br %r14
.align 16
.Lrestart_psw:
.long 0x00080000,0x80000000 + .Lrestart_part2
.section .data..nosave,"aw",@progbits
.align 8
.Lcontinue_psw:
.quad 0,.Lcontinue
.previous
.section .bss
.align 8
.Lctlregs:
.rept 16
.quad 0
.endr
.Lfpctl:
.long 0
.previous
#else /* CONFIG_64BIT */
ENTRY(s390_base_mcck_handler)
basr %r13,0
0: l %r15,__LC_PANIC_STACK # load panic stack
ahi %r15,-STACK_FRAME_OVERHEAD
l %r1,2f-0b(%r13)
l %r1,0(%r1)
ltr %r1,%r1
jz 1f
basr %r14,%r1
1: lm %r0,%r15,__LC_GPREGS_SAVE_AREA
lpsw __LC_MCK_OLD_PSW
2: .long s390_base_mcck_handler_fn
.section .bss
.align 4
.globl s390_base_mcck_handler_fn
s390_base_mcck_handler_fn:
.long 0
.previous
ENTRY(s390_base_ext_handler)
stm %r0,%r15,__LC_SAVE_AREA_ASYNC
basr %r13,0
0: ahi %r15,-STACK_FRAME_OVERHEAD
l %r1,2f-0b(%r13)
l %r1,0(%r1)
ltr %r1,%r1
jz 1f
basr %r14,%r1
1: lm %r0,%r15,__LC_SAVE_AREA_ASYNC
ni __LC_EXT_OLD_PSW+1,0xfd # clear wait state bit
lpsw __LC_EXT_OLD_PSW
2: .long s390_base_ext_handler_fn
.section .bss
.align 4
.globl s390_base_ext_handler_fn
s390_base_ext_handler_fn:
.long 0
.previous
ENTRY(s390_base_pgm_handler)
stm %r0,%r15,__LC_SAVE_AREA_SYNC
basr %r13,0
0: ahi %r15,-STACK_FRAME_OVERHEAD
l %r1,2f-0b(%r13)
l %r1,0(%r1)
ltr %r1,%r1
jz 1f
basr %r14,%r1
lm %r0,%r15,__LC_SAVE_AREA_SYNC
lpsw __LC_PGM_OLD_PSW
1: lpsw disabled_wait_psw-0b(%r13)
2: .long s390_base_pgm_handler_fn
disabled_wait_psw:
.align 8
.long 0x000a0000,0x00000000 + s390_base_pgm_handler
.section .bss
.align 4
.globl s390_base_pgm_handler_fn
s390_base_pgm_handler_fn:
.long 0
.previous
#endif /* CONFIG_64BIT */