linux/drivers/usb/core/generic.c

246 lines
6.9 KiB
C

/*
* drivers/usb/generic.c - generic driver for USB devices (not interfaces)
*
* (C) Copyright 2005 Greg Kroah-Hartman <gregkh@suse.de>
*
* based on drivers/usb/usb.c which had the following copyrights:
* (C) Copyright Linus Torvalds 1999
* (C) Copyright Johannes Erdfelt 1999-2001
* (C) Copyright Andreas Gal 1999
* (C) Copyright Gregory P. Smith 1999
* (C) Copyright Deti Fliegl 1999 (new USB architecture)
* (C) Copyright Randy Dunlap 2000
* (C) Copyright David Brownell 2000-2004
* (C) Copyright Yggdrasil Computing, Inc. 2000
* (usb_device_id matching changes by Adam J. Richter)
* (C) Copyright Greg Kroah-Hartman 2002-2003
*
*/
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include "usb.h"
static inline const char *plural(int n)
{
return (n == 1 ? "" : "s");
}
static int is_rndis(struct usb_interface_descriptor *desc)
{
return desc->bInterfaceClass == USB_CLASS_COMM
&& desc->bInterfaceSubClass == 2
&& desc->bInterfaceProtocol == 0xff;
}
static int is_activesync(struct usb_interface_descriptor *desc)
{
return desc->bInterfaceClass == USB_CLASS_MISC
&& desc->bInterfaceSubClass == 1
&& desc->bInterfaceProtocol == 1;
}
int usb_choose_configuration(struct usb_device *udev)
{
int i;
int num_configs;
int insufficient_power = 0;
struct usb_host_config *c, *best;
best = NULL;
c = udev->config;
num_configs = udev->descriptor.bNumConfigurations;
for (i = 0; i < num_configs; (i++, c++)) {
struct usb_interface_descriptor *desc = NULL;
/* It's possible that a config has no interfaces! */
if (c->desc.bNumInterfaces > 0)
desc = &c->intf_cache[0]->altsetting->desc;
/*
* HP's USB bus-powered keyboard has only one configuration
* and it claims to be self-powered; other devices may have
* similar errors in their descriptors. If the next test
* were allowed to execute, such configurations would always
* be rejected and the devices would not work as expected.
* In the meantime, we run the risk of selecting a config
* that requires external power at a time when that power
* isn't available. It seems to be the lesser of two evils.
*
* Bugzilla #6448 reports a device that appears to crash
* when it receives a GET_DEVICE_STATUS request! We don't
* have any other way to tell whether a device is self-powered,
* but since we don't use that information anywhere but here,
* the call has been removed.
*
* Maybe the GET_DEVICE_STATUS call and the test below can
* be reinstated when device firmwares become more reliable.
* Don't hold your breath.
*/
#if 0
/* Rule out self-powered configs for a bus-powered device */
if (bus_powered && (c->desc.bmAttributes &
USB_CONFIG_ATT_SELFPOWER))
continue;
#endif
/*
* The next test may not be as effective as it should be.
* Some hubs have errors in their descriptor, claiming
* to be self-powered when they are really bus-powered.
* We will overestimate the amount of current such hubs
* make available for each port.
*
* This is a fairly benign sort of failure. It won't
* cause us to reject configurations that we should have
* accepted.
*/
/* Rule out configs that draw too much bus current */
if (c->desc.bMaxPower * 2 > udev->bus_mA) {
insufficient_power++;
continue;
}
/* When the first config's first interface is one of Microsoft's
* pet nonstandard Ethernet-over-USB protocols, ignore it unless
* this kernel has enabled the necessary host side driver.
* But: Don't ignore it if it's the only config.
*/
if (i == 0 && num_configs > 1 && desc &&
(is_rndis(desc) || is_activesync(desc))) {
#if !defined(CONFIG_USB_NET_RNDIS_HOST) && !defined(CONFIG_USB_NET_RNDIS_HOST_MODULE)
continue;
#else
best = c;
#endif
}
/* From the remaining configs, choose the first one whose
* first interface is for a non-vendor-specific class.
* Reason: Linux is more likely to have a class driver
* than a vendor-specific driver. */
else if (udev->descriptor.bDeviceClass !=
USB_CLASS_VENDOR_SPEC &&
(desc && desc->bInterfaceClass !=
USB_CLASS_VENDOR_SPEC)) {
best = c;
break;
}
/* If all the remaining configs are vendor-specific,
* choose the first one. */
else if (!best)
best = c;
}
if (insufficient_power > 0)
dev_info(&udev->dev, "rejected %d configuration%s "
"due to insufficient available bus power\n",
insufficient_power, plural(insufficient_power));
if (best) {
i = best->desc.bConfigurationValue;
dev_dbg(&udev->dev,
"configuration #%d chosen from %d choice%s\n",
i, num_configs, plural(num_configs));
} else {
i = -1;
dev_warn(&udev->dev,
"no configuration chosen from %d choice%s\n",
num_configs, plural(num_configs));
}
return i;
}
static int generic_probe(struct usb_device *udev)
{
int err, c;
/* Choose and set the configuration. This registers the interfaces
* with the driver core and lets interface drivers bind to them.
*/
if (usb_device_is_owned(udev))
; /* Don't configure if the device is owned */
else if (udev->authorized == 0)
dev_err(&udev->dev, "Device is not authorized for usage\n");
else {
c = usb_choose_configuration(udev);
if (c >= 0) {
err = usb_set_configuration(udev, c);
if (err) {
dev_err(&udev->dev, "can't set config #%d, error %d\n",
c, err);
/* This need not be fatal. The user can try to
* set other configurations. */
}
}
}
/* USB device state == configured ... usable */
usb_notify_add_device(udev);
return 0;
}
static void generic_disconnect(struct usb_device *udev)
{
usb_notify_remove_device(udev);
/* if this is only an unbind, not a physical disconnect, then
* unconfigure the device */
if (udev->actconfig)
usb_set_configuration(udev, -1);
}
#ifdef CONFIG_PM
static int generic_suspend(struct usb_device *udev, pm_message_t msg)
{
int rc;
/* Normal USB devices suspend through their upstream port.
* Root hubs don't have upstream ports to suspend,
* so we have to shut down their downstream HC-to-USB
* interfaces manually by doing a bus (or "global") suspend.
*/
if (!udev->parent)
rc = hcd_bus_suspend(udev, msg);
/* Non-root devices don't need to do anything for FREEZE or PRETHAW */
else if (msg.event == PM_EVENT_FREEZE || msg.event == PM_EVENT_PRETHAW)
rc = 0;
else
rc = usb_port_suspend(udev, msg);
return rc;
}
static int generic_resume(struct usb_device *udev, pm_message_t msg)
{
int rc;
/* Normal USB devices resume/reset through their upstream port.
* Root hubs don't have upstream ports to resume or reset,
* so we have to start up their downstream HC-to-USB
* interfaces manually by doing a bus (or "global") resume.
*/
if (!udev->parent)
rc = hcd_bus_resume(udev, msg);
else
rc = usb_port_resume(udev, msg);
return rc;
}
#endif /* CONFIG_PM */
struct usb_device_driver usb_generic_driver = {
.name = "usb",
.probe = generic_probe,
.disconnect = generic_disconnect,
#ifdef CONFIG_PM
.suspend = generic_suspend,
.resume = generic_resume,
#endif
.supports_autosuspend = 1,
};