300 lines
12 KiB
C
300 lines
12 KiB
C
/*
|
|
V4L2 sub-device support header.
|
|
|
|
Copyright (C) 2008 Hans Verkuil <hverkuil@xs4all.nl>
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef _V4L2_SUBDEV_H
|
|
#define _V4L2_SUBDEV_H
|
|
|
|
#include <media/v4l2-common.h>
|
|
|
|
struct v4l2_device;
|
|
struct v4l2_subdev;
|
|
struct tuner_setup;
|
|
|
|
/* decode_vbi_line */
|
|
struct v4l2_decode_vbi_line {
|
|
u32 is_second_field; /* Set to 0 for the first (odd) field,
|
|
set to 1 for the second (even) field. */
|
|
u8 *p; /* Pointer to the sliced VBI data from the decoder.
|
|
On exit points to the start of the payload. */
|
|
u32 line; /* Line number of the sliced VBI data (1-23) */
|
|
u32 type; /* VBI service type (V4L2_SLICED_*). 0 if no service found */
|
|
};
|
|
|
|
/* Sub-devices are devices that are connected somehow to the main bridge
|
|
device. These devices are usually audio/video muxers/encoders/decoders or
|
|
sensors and webcam controllers.
|
|
|
|
Usually these devices are controlled through an i2c bus, but other busses
|
|
may also be used.
|
|
|
|
The v4l2_subdev struct provides a way of accessing these devices in a
|
|
generic manner. Most operations that these sub-devices support fall in
|
|
a few categories: core ops, audio ops, video ops and tuner ops.
|
|
|
|
More categories can be added if needed, although this should remain a
|
|
limited set (no more than approx. 8 categories).
|
|
|
|
Each category has its own set of ops that subdev drivers can implement.
|
|
|
|
A subdev driver can leave the pointer to the category ops NULL if
|
|
it does not implement them (e.g. an audio subdev will generally not
|
|
implement the video category ops). The exception is the core category:
|
|
this must always be present.
|
|
|
|
These ops are all used internally so it is no problem to change, remove
|
|
or add ops or move ops from one to another category. Currently these
|
|
ops are based on the original ioctls, but since ops are not limited to
|
|
one argument there is room for improvement here once all i2c subdev
|
|
drivers are converted to use these ops.
|
|
*/
|
|
|
|
/* Core ops: it is highly recommended to implement at least these ops:
|
|
|
|
g_chip_ident
|
|
log_status
|
|
g_register
|
|
s_register
|
|
|
|
This provides basic debugging support.
|
|
|
|
The ioctl ops is meant for generic ioctl-like commands. Depending on
|
|
the use-case it might be better to use subdev-specific ops (currently
|
|
not yet implemented) since ops provide proper type-checking.
|
|
*/
|
|
|
|
/* s_config: if set, then it is always called by the v4l2_i2c_new_subdev*
|
|
functions after the v4l2_subdev was registered. It is used to pass
|
|
platform data to the subdev which can be used during initialization.
|
|
|
|
init: initialize the sensor registors to some sort of reasonable default
|
|
values. Do not use for new drivers and should be removed in existing
|
|
drivers.
|
|
|
|
load_fw: load firmware.
|
|
|
|
reset: generic reset command. The argument selects which subsystems to
|
|
reset. Passing 0 will always reset the whole chip. Do not use for new
|
|
drivers without discussing this first on the linux-media mailinglist.
|
|
There should be no reason normally to reset a device.
|
|
|
|
s_gpio: set GPIO pins. Very simple right now, might need to be extended with
|
|
a direction argument if needed.
|
|
*/
|
|
struct v4l2_subdev_core_ops {
|
|
int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip);
|
|
int (*log_status)(struct v4l2_subdev *sd);
|
|
int (*s_config)(struct v4l2_subdev *sd, int irq, void *platform_data);
|
|
int (*init)(struct v4l2_subdev *sd, u32 val);
|
|
int (*load_fw)(struct v4l2_subdev *sd);
|
|
int (*reset)(struct v4l2_subdev *sd, u32 val);
|
|
int (*s_gpio)(struct v4l2_subdev *sd, u32 val);
|
|
int (*queryctrl)(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc);
|
|
int (*g_ctrl)(struct v4l2_subdev *sd, struct v4l2_control *ctrl);
|
|
int (*s_ctrl)(struct v4l2_subdev *sd, struct v4l2_control *ctrl);
|
|
int (*g_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls);
|
|
int (*s_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls);
|
|
int (*try_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls);
|
|
int (*querymenu)(struct v4l2_subdev *sd, struct v4l2_querymenu *qm);
|
|
int (*s_std)(struct v4l2_subdev *sd, v4l2_std_id norm);
|
|
long (*ioctl)(struct v4l2_subdev *sd, unsigned int cmd, void *arg);
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
int (*g_register)(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg);
|
|
int (*s_register)(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg);
|
|
#endif
|
|
};
|
|
|
|
/* s_mode: switch the tuner to a specific tuner mode. Replacement of s_radio.
|
|
|
|
s_radio: v4l device was opened in Radio mode, to be replaced by s_mode.
|
|
|
|
s_type_addr: sets tuner type and its I2C addr.
|
|
|
|
s_config: sets tda9887 specific stuff, like port1, port2 and qss
|
|
|
|
s_standby: puts tuner on powersaving state, disabling it, except for i2c.
|
|
*/
|
|
struct v4l2_subdev_tuner_ops {
|
|
int (*s_mode)(struct v4l2_subdev *sd, enum v4l2_tuner_type);
|
|
int (*s_radio)(struct v4l2_subdev *sd);
|
|
int (*s_frequency)(struct v4l2_subdev *sd, struct v4l2_frequency *freq);
|
|
int (*g_frequency)(struct v4l2_subdev *sd, struct v4l2_frequency *freq);
|
|
int (*g_tuner)(struct v4l2_subdev *sd, struct v4l2_tuner *vt);
|
|
int (*s_tuner)(struct v4l2_subdev *sd, struct v4l2_tuner *vt);
|
|
int (*s_type_addr)(struct v4l2_subdev *sd, struct tuner_setup *type);
|
|
int (*s_config)(struct v4l2_subdev *sd, const struct v4l2_priv_tun_config *config);
|
|
int (*s_standby)(struct v4l2_subdev *sd);
|
|
};
|
|
|
|
/* s_clock_freq: set the frequency (in Hz) of the audio clock output.
|
|
Used to slave an audio processor to the video decoder, ensuring that
|
|
audio and video remain synchronized. Usual values for the frequency
|
|
are 48000, 44100 or 32000 Hz. If the frequency is not supported, then
|
|
-EINVAL is returned.
|
|
|
|
s_i2s_clock_freq: sets I2S speed in bps. This is used to provide a standard
|
|
way to select I2S clock used by driving digital audio streams at some
|
|
board designs. Usual values for the frequency are 1024000 and 2048000.
|
|
If the frequency is not supported, then -EINVAL is returned.
|
|
|
|
s_routing: used to define the input and/or output pins of an audio chip,
|
|
and any additional configuration data.
|
|
Never attempt to use user-level input IDs (e.g. Composite, S-Video,
|
|
Tuner) at this level. An i2c device shouldn't know about whether an
|
|
input pin is connected to a Composite connector, become on another
|
|
board or platform it might be connected to something else entirely.
|
|
The calling driver is responsible for mapping a user-level input to
|
|
the right pins on the i2c device.
|
|
*/
|
|
struct v4l2_subdev_audio_ops {
|
|
int (*s_clock_freq)(struct v4l2_subdev *sd, u32 freq);
|
|
int (*s_i2s_clock_freq)(struct v4l2_subdev *sd, u32 freq);
|
|
int (*s_routing)(struct v4l2_subdev *sd, u32 input, u32 output, u32 config);
|
|
};
|
|
|
|
/*
|
|
decode_vbi_line: video decoders that support sliced VBI need to implement
|
|
this ioctl. Field p of the v4l2_sliced_vbi_line struct is set to the
|
|
start of the VBI data that was generated by the decoder. The driver
|
|
then parses the sliced VBI data and sets the other fields in the
|
|
struct accordingly. The pointer p is updated to point to the start of
|
|
the payload which can be copied verbatim into the data field of the
|
|
v4l2_sliced_vbi_data struct. If no valid VBI data was found, then the
|
|
type field is set to 0 on return.
|
|
|
|
s_vbi_data: used to generate VBI signals on a video signal.
|
|
v4l2_sliced_vbi_data is filled with the data packets that should be
|
|
output. Note that if you set the line field to 0, then that VBI signal
|
|
is disabled. If no valid VBI data was found, then the type field is
|
|
set to 0 on return.
|
|
|
|
g_vbi_data: used to obtain the sliced VBI packet from a readback register.
|
|
Not all video decoders support this. If no data is available because
|
|
the readback register contains invalid or erroneous data -EIO is
|
|
returned. Note that you must fill in the 'id' member and the 'field'
|
|
member (to determine whether CC data from the first or second field
|
|
should be obtained).
|
|
|
|
s_std_output: set v4l2_std_id for video OUTPUT devices. This is ignored by
|
|
video input devices.
|
|
|
|
s_crystal_freq: sets the frequency of the crystal used to generate the
|
|
clocks in Hz. An extra flags field allows device specific configuration
|
|
regarding clock frequency dividers, etc. If not used, then set flags
|
|
to 0. If the frequency is not supported, then -EINVAL is returned.
|
|
|
|
g_input_status: get input status. Same as the status field in the v4l2_input
|
|
struct.
|
|
|
|
s_routing: see s_routing in audio_ops, except this version is for video
|
|
devices.
|
|
*/
|
|
struct v4l2_subdev_video_ops {
|
|
int (*s_routing)(struct v4l2_subdev *sd, u32 input, u32 output, u32 config);
|
|
int (*s_crystal_freq)(struct v4l2_subdev *sd, u32 freq, u32 flags);
|
|
int (*decode_vbi_line)(struct v4l2_subdev *sd, struct v4l2_decode_vbi_line *vbi_line);
|
|
int (*s_vbi_data)(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *vbi_data);
|
|
int (*g_vbi_data)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_data *vbi_data);
|
|
int (*g_sliced_vbi_cap)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_cap *cap);
|
|
int (*s_std_output)(struct v4l2_subdev *sd, v4l2_std_id std);
|
|
int (*querystd)(struct v4l2_subdev *sd, v4l2_std_id *std);
|
|
int (*g_input_status)(struct v4l2_subdev *sd, u32 *status);
|
|
int (*s_stream)(struct v4l2_subdev *sd, int enable);
|
|
int (*enum_fmt)(struct v4l2_subdev *sd, struct v4l2_fmtdesc *fmtdesc);
|
|
int (*g_fmt)(struct v4l2_subdev *sd, struct v4l2_format *fmt);
|
|
int (*try_fmt)(struct v4l2_subdev *sd, struct v4l2_format *fmt);
|
|
int (*s_fmt)(struct v4l2_subdev *sd, struct v4l2_format *fmt);
|
|
int (*cropcap)(struct v4l2_subdev *sd, struct v4l2_cropcap *cc);
|
|
int (*g_crop)(struct v4l2_subdev *sd, struct v4l2_crop *crop);
|
|
int (*s_crop)(struct v4l2_subdev *sd, struct v4l2_crop *crop);
|
|
int (*g_parm)(struct v4l2_subdev *sd, struct v4l2_streamparm *param);
|
|
int (*s_parm)(struct v4l2_subdev *sd, struct v4l2_streamparm *param);
|
|
int (*enum_framesizes)(struct v4l2_subdev *sd, struct v4l2_frmsizeenum *fsize);
|
|
int (*enum_frameintervals)(struct v4l2_subdev *sd, struct v4l2_frmivalenum *fival);
|
|
};
|
|
|
|
struct v4l2_subdev_ops {
|
|
const struct v4l2_subdev_core_ops *core;
|
|
const struct v4l2_subdev_tuner_ops *tuner;
|
|
const struct v4l2_subdev_audio_ops *audio;
|
|
const struct v4l2_subdev_video_ops *video;
|
|
};
|
|
|
|
#define V4L2_SUBDEV_NAME_SIZE 32
|
|
|
|
/* Set this flag if this subdev is a i2c device. */
|
|
#define V4L2_SUBDEV_FL_IS_I2C (1U << 0)
|
|
|
|
/* Each instance of a subdev driver should create this struct, either
|
|
stand-alone or embedded in a larger struct.
|
|
*/
|
|
struct v4l2_subdev {
|
|
struct list_head list;
|
|
struct module *owner;
|
|
u32 flags;
|
|
struct v4l2_device *v4l2_dev;
|
|
const struct v4l2_subdev_ops *ops;
|
|
/* name must be unique */
|
|
char name[V4L2_SUBDEV_NAME_SIZE];
|
|
/* can be used to group similar subdevs, value is driver-specific */
|
|
u32 grp_id;
|
|
/* pointer to private data */
|
|
void *priv;
|
|
};
|
|
|
|
static inline void v4l2_set_subdevdata(struct v4l2_subdev *sd, void *p)
|
|
{
|
|
sd->priv = p;
|
|
}
|
|
|
|
static inline void *v4l2_get_subdevdata(const struct v4l2_subdev *sd)
|
|
{
|
|
return sd->priv;
|
|
}
|
|
|
|
static inline void v4l2_subdev_init(struct v4l2_subdev *sd,
|
|
const struct v4l2_subdev_ops *ops)
|
|
{
|
|
INIT_LIST_HEAD(&sd->list);
|
|
/* ops->core MUST be set */
|
|
BUG_ON(!ops || !ops->core);
|
|
sd->ops = ops;
|
|
sd->v4l2_dev = NULL;
|
|
sd->flags = 0;
|
|
sd->name[0] = '\0';
|
|
sd->grp_id = 0;
|
|
sd->priv = NULL;
|
|
}
|
|
|
|
/* Call an ops of a v4l2_subdev, doing the right checks against
|
|
NULL pointers.
|
|
|
|
Example: err = v4l2_subdev_call(sd, core, g_chip_ident, &chip);
|
|
*/
|
|
#define v4l2_subdev_call(sd, o, f, args...) \
|
|
(!(sd) ? -ENODEV : (((sd) && (sd)->ops->o && (sd)->ops->o->f) ? \
|
|
(sd)->ops->o->f((sd) , ##args) : -ENOIOCTLCMD))
|
|
|
|
/* Send a notification to v4l2_device. */
|
|
#define v4l2_subdev_notify(sd, notification, arg) \
|
|
((!(sd) || !(sd)->v4l2_dev || !(sd)->v4l2_dev->notify) ? -ENODEV : \
|
|
(sd)->v4l2_dev->notify((sd), (notification), (arg)))
|
|
|
|
#endif
|