291 lines
6.0 KiB
C
291 lines
6.0 KiB
C
/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
|
|
* 02110-1301, USA.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#ifdef CONFIG_ARCH_MSM7X30
|
|
#include <linux/mfd/pmic8058.h>
|
|
#endif
|
|
#include <mach/gpio.h>
|
|
#include "msm_fb.h"
|
|
|
|
static int lcdc_sharp_panel_off(struct platform_device *pdev);
|
|
|
|
static int spi_cs;
|
|
static int spi_sclk;
|
|
static int spi_mosi;
|
|
static int spi_miso;
|
|
static unsigned char bit_shift[8] = { (1 << 7), /* MSB */
|
|
(1 << 6),
|
|
(1 << 5),
|
|
(1 << 4),
|
|
(1 << 3),
|
|
(1 << 2),
|
|
(1 << 1),
|
|
(1 << 0) /* LSB */
|
|
};
|
|
|
|
struct sharp_state_type {
|
|
boolean disp_initialized;
|
|
boolean display_on;
|
|
boolean disp_powered_up;
|
|
};
|
|
|
|
struct sharp_spi_data {
|
|
u8 addr;
|
|
u8 data;
|
|
};
|
|
|
|
static struct sharp_spi_data init_sequence[] = {
|
|
{ 15, 0x01 },
|
|
{ 5, 0x01 },
|
|
{ 7, 0x10 },
|
|
{ 9, 0x1E },
|
|
{ 10, 0x04 },
|
|
{ 17, 0xFF },
|
|
{ 21, 0x8A },
|
|
{ 22, 0x00 },
|
|
{ 23, 0x82 },
|
|
{ 24, 0x24 },
|
|
{ 25, 0x22 },
|
|
{ 26, 0x6D },
|
|
{ 27, 0xEB },
|
|
{ 28, 0xB9 },
|
|
{ 29, 0x3A },
|
|
{ 49, 0x1A },
|
|
{ 50, 0x16 },
|
|
{ 51, 0x05 },
|
|
{ 55, 0x7F },
|
|
{ 56, 0x15 },
|
|
{ 57, 0x7B },
|
|
{ 60, 0x05 },
|
|
{ 61, 0x0C },
|
|
{ 62, 0x80 },
|
|
{ 63, 0x00 },
|
|
{ 92, 0x90 },
|
|
{ 97, 0x01 },
|
|
{ 98, 0xFF },
|
|
{ 113, 0x11 },
|
|
{ 114, 0x02 },
|
|
{ 115, 0x08 },
|
|
{ 123, 0xAB },
|
|
{ 124, 0x04 },
|
|
{ 6, 0x02 },
|
|
{ 133, 0x00 },
|
|
{ 134, 0xFE },
|
|
{ 135, 0x22 },
|
|
{ 136, 0x0B },
|
|
{ 137, 0xFF },
|
|
{ 138, 0x0F },
|
|
{ 139, 0x00 },
|
|
{ 140, 0xFE },
|
|
{ 141, 0x22 },
|
|
{ 142, 0x0B },
|
|
{ 143, 0xFF },
|
|
{ 144, 0x0F },
|
|
{ 145, 0x00 },
|
|
{ 146, 0xFE },
|
|
{ 147, 0x22 },
|
|
{ 148, 0x0B },
|
|
{ 149, 0xFF },
|
|
{ 150, 0x0F },
|
|
{ 202, 0x30 },
|
|
{ 30, 0x01 },
|
|
{ 4, 0x01 },
|
|
{ 31, 0x41 },
|
|
};
|
|
|
|
static struct sharp_state_type sharp_state = { 0 };
|
|
static struct msm_panel_common_pdata *lcdc_sharp_pdata;
|
|
|
|
static void sharp_spi_write_byte(u8 val)
|
|
{
|
|
int i;
|
|
|
|
/* Clock should be Low before entering */
|
|
for (i = 0; i < 8; i++) {
|
|
/* #1: Drive the Data (High or Low) */
|
|
if (val & bit_shift[i])
|
|
gpio_set_value(spi_mosi, 1);
|
|
else
|
|
gpio_set_value(spi_mosi, 0);
|
|
|
|
/* #2: Drive the Clk High and then Low */
|
|
gpio_set_value(spi_sclk, 1);
|
|
gpio_set_value(spi_sclk, 0);
|
|
}
|
|
}
|
|
|
|
static void serigo(u8 reg, u8 data)
|
|
{
|
|
/* Enable the Chip Select - low */
|
|
gpio_set_value(spi_cs, 0);
|
|
udelay(1);
|
|
|
|
/* Transmit register address first, then data */
|
|
sharp_spi_write_byte(reg);
|
|
|
|
/* Idle state of MOSI is Low */
|
|
gpio_set_value(spi_mosi, 0);
|
|
udelay(1);
|
|
sharp_spi_write_byte(data);
|
|
|
|
gpio_set_value(spi_mosi, 0);
|
|
gpio_set_value(spi_cs, 1);
|
|
}
|
|
|
|
static void sharp_spi_init(void)
|
|
{
|
|
spi_sclk = *(lcdc_sharp_pdata->gpio_num);
|
|
spi_cs = *(lcdc_sharp_pdata->gpio_num + 1);
|
|
spi_mosi = *(lcdc_sharp_pdata->gpio_num + 2);
|
|
spi_miso = *(lcdc_sharp_pdata->gpio_num + 3);
|
|
|
|
/* Set the output so that we don't disturb the slave device */
|
|
gpio_set_value(spi_sclk, 0);
|
|
gpio_set_value(spi_mosi, 0);
|
|
|
|
/* Set the Chip Select deasserted (active low) */
|
|
gpio_set_value(spi_cs, 1);
|
|
}
|
|
|
|
static void sharp_disp_powerup(void)
|
|
{
|
|
if (!sharp_state.disp_powered_up && !sharp_state.display_on)
|
|
sharp_state.disp_powered_up = TRUE;
|
|
}
|
|
|
|
static void sharp_disp_on(void)
|
|
{
|
|
int i;
|
|
|
|
if (sharp_state.disp_powered_up && !sharp_state.display_on) {
|
|
for (i = 0; i < ARRAY_SIZE(init_sequence); i++) {
|
|
serigo(init_sequence[i].addr,
|
|
init_sequence[i].data);
|
|
}
|
|
mdelay(10);
|
|
serigo(31, 0xC1);
|
|
mdelay(10);
|
|
serigo(31, 0xD9);
|
|
serigo(31, 0xDF);
|
|
|
|
sharp_state.display_on = TRUE;
|
|
}
|
|
}
|
|
|
|
static int lcdc_sharp_panel_on(struct platform_device *pdev)
|
|
{
|
|
if (!sharp_state.disp_initialized) {
|
|
lcdc_sharp_pdata->panel_config_gpio(1);
|
|
sharp_spi_init();
|
|
sharp_disp_powerup();
|
|
sharp_disp_on();
|
|
sharp_state.disp_initialized = TRUE;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int lcdc_sharp_panel_off(struct platform_device *pdev)
|
|
{
|
|
if (sharp_state.disp_powered_up && sharp_state.display_on) {
|
|
serigo(4, 0x00);
|
|
mdelay(40);
|
|
serigo(31, 0xC1);
|
|
mdelay(40);
|
|
serigo(31, 0x00);
|
|
mdelay(100);
|
|
sharp_state.display_on = FALSE;
|
|
sharp_state.disp_initialized = FALSE;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int __init sharp_probe(struct platform_device *pdev)
|
|
{
|
|
if (pdev->id == 0) {
|
|
lcdc_sharp_pdata = pdev->dev.platform_data;
|
|
return 0;
|
|
}
|
|
msm_fb_add_device(pdev);
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver this_driver = {
|
|
.probe = sharp_probe,
|
|
.driver = {
|
|
.name = "lcdc_sharp_wvga",
|
|
},
|
|
};
|
|
|
|
static struct msm_fb_panel_data sharp_panel_data = {
|
|
.on = lcdc_sharp_panel_on,
|
|
.off = lcdc_sharp_panel_off,
|
|
};
|
|
|
|
static struct platform_device this_device = {
|
|
.name = "lcdc_sharp_wvga",
|
|
.id = 1,
|
|
.dev = {
|
|
.platform_data = &sharp_panel_data,
|
|
}
|
|
};
|
|
|
|
static int __init lcdc_sharp_panel_init(void)
|
|
{
|
|
int ret;
|
|
struct msm_panel_info *pinfo;
|
|
|
|
#ifdef CONFIG_FB_MSM_MDDI_AUTO_DETECT
|
|
if (msm_fb_detect_client("lcdc_sharp_wvga_pt"))
|
|
return 0;
|
|
#endif
|
|
|
|
ret = platform_driver_register(&this_driver);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pinfo = &sharp_panel_data.panel_info;
|
|
pinfo->xres = 480;
|
|
pinfo->yres = 800;
|
|
pinfo->type = LCDC_PANEL;
|
|
pinfo->pdest = DISPLAY_1;
|
|
pinfo->wait_cycle = 0;
|
|
pinfo->bpp = 18;
|
|
pinfo->fb_num = 2;
|
|
pinfo->clk_rate = 24500000;
|
|
pinfo->bl_max = 4;
|
|
pinfo->bl_min = 1;
|
|
|
|
pinfo->lcdc.h_back_porch = 20;
|
|
pinfo->lcdc.h_front_porch = 10;
|
|
pinfo->lcdc.h_pulse_width = 10;
|
|
pinfo->lcdc.v_back_porch = 2;
|
|
pinfo->lcdc.v_front_porch = 2;
|
|
pinfo->lcdc.v_pulse_width = 2;
|
|
pinfo->lcdc.border_clr = 0;
|
|
pinfo->lcdc.underflow_clr = 0xff;
|
|
pinfo->lcdc.hsync_skew = 0;
|
|
|
|
ret = platform_device_register(&this_device);
|
|
if (ret)
|
|
platform_driver_unregister(&this_driver);
|
|
|
|
return ret;
|
|
}
|
|
|
|
module_init(lcdc_sharp_panel_init);
|