9d0412680e
Now that Linux includes support for the Atmel AT91SAM9260 and AT91SAM9261 processors in addition to the original Atmel AT91RM9200 (with support for more AT91 processors pending), the "mach-at91rm9200" and "arch-at91rm9200" directories should be renamed to indicate their more generic nature. The following git commands should be run BEFORE applying this patch: git-mv arch/arm/mach-at91rm9200 arch/arm/mach-at91 git-mv include/asm-arm/arch-at91rm9200 include/asm-arm/arch-at91 Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
414 lines
9.6 KiB
C
414 lines
9.6 KiB
C
/*
|
|
* linux/arch/arm/mach-at91/gpio.c
|
|
*
|
|
* Copyright (C) 2005 HP Labs
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/list.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/hardware.h>
|
|
#include <asm/arch/at91_pio.h>
|
|
#include <asm/arch/gpio.h>
|
|
|
|
#include "generic.h"
|
|
|
|
|
|
static struct at91_gpio_bank *gpio;
|
|
static int gpio_banks;
|
|
|
|
|
|
static inline void __iomem *pin_to_controller(unsigned pin)
|
|
{
|
|
void __iomem *sys_base = (void __iomem *) AT91_VA_BASE_SYS;
|
|
|
|
pin -= PIN_BASE;
|
|
pin /= 32;
|
|
if (likely(pin < gpio_banks))
|
|
return sys_base + gpio[pin].offset;
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static inline unsigned pin_to_mask(unsigned pin)
|
|
{
|
|
pin -= PIN_BASE;
|
|
return 1 << (pin % 32);
|
|
}
|
|
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
/* Not all hardware capabilities are exposed through these calls; they
|
|
* only encapsulate the most common features and modes. (So if you
|
|
* want to change signals in groups, do it directly.)
|
|
*
|
|
* Bootloaders will usually handle some of the pin multiplexing setup.
|
|
* The intent is certainly that by the time Linux is fully booted, all
|
|
* pins should have been fully initialized. These setup calls should
|
|
* only be used by board setup routines, or possibly in driver probe().
|
|
*
|
|
* For bootloaders doing all that setup, these calls could be inlined
|
|
* as NOPs so Linux won't duplicate any setup code
|
|
*/
|
|
|
|
|
|
/*
|
|
* mux the pin to the "A" internal peripheral role.
|
|
*/
|
|
int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup)
|
|
{
|
|
void __iomem *pio = pin_to_controller(pin);
|
|
unsigned mask = pin_to_mask(pin);
|
|
|
|
if (!pio)
|
|
return -EINVAL;
|
|
|
|
__raw_writel(mask, pio + PIO_IDR);
|
|
__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
|
|
__raw_writel(mask, pio + PIO_ASR);
|
|
__raw_writel(mask, pio + PIO_PDR);
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(at91_set_A_periph);
|
|
|
|
|
|
/*
|
|
* mux the pin to the "B" internal peripheral role.
|
|
*/
|
|
int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup)
|
|
{
|
|
void __iomem *pio = pin_to_controller(pin);
|
|
unsigned mask = pin_to_mask(pin);
|
|
|
|
if (!pio)
|
|
return -EINVAL;
|
|
|
|
__raw_writel(mask, pio + PIO_IDR);
|
|
__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
|
|
__raw_writel(mask, pio + PIO_BSR);
|
|
__raw_writel(mask, pio + PIO_PDR);
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(at91_set_B_periph);
|
|
|
|
|
|
/*
|
|
* mux the pin to the gpio controller (instead of "A" or "B" peripheral), and
|
|
* configure it for an input.
|
|
*/
|
|
int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup)
|
|
{
|
|
void __iomem *pio = pin_to_controller(pin);
|
|
unsigned mask = pin_to_mask(pin);
|
|
|
|
if (!pio)
|
|
return -EINVAL;
|
|
|
|
__raw_writel(mask, pio + PIO_IDR);
|
|
__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
|
|
__raw_writel(mask, pio + PIO_ODR);
|
|
__raw_writel(mask, pio + PIO_PER);
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(at91_set_gpio_input);
|
|
|
|
|
|
/*
|
|
* mux the pin to the gpio controller (instead of "A" or "B" peripheral),
|
|
* and configure it for an output.
|
|
*/
|
|
int __init_or_module at91_set_gpio_output(unsigned pin, int value)
|
|
{
|
|
void __iomem *pio = pin_to_controller(pin);
|
|
unsigned mask = pin_to_mask(pin);
|
|
|
|
if (!pio)
|
|
return -EINVAL;
|
|
|
|
__raw_writel(mask, pio + PIO_IDR);
|
|
__raw_writel(mask, pio + PIO_PUDR);
|
|
__raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
|
|
__raw_writel(mask, pio + PIO_OER);
|
|
__raw_writel(mask, pio + PIO_PER);
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(at91_set_gpio_output);
|
|
|
|
|
|
/*
|
|
* enable/disable the glitch filter; mostly used with IRQ handling.
|
|
*/
|
|
int __init_or_module at91_set_deglitch(unsigned pin, int is_on)
|
|
{
|
|
void __iomem *pio = pin_to_controller(pin);
|
|
unsigned mask = pin_to_mask(pin);
|
|
|
|
if (!pio)
|
|
return -EINVAL;
|
|
__raw_writel(mask, pio + (is_on ? PIO_IFER : PIO_IFDR));
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(at91_set_deglitch);
|
|
|
|
/*
|
|
* enable/disable the multi-driver; This is only valid for output and
|
|
* allows the output pin to run as an open collector output.
|
|
*/
|
|
int __init_or_module at91_set_multi_drive(unsigned pin, int is_on)
|
|
{
|
|
void __iomem *pio = pin_to_controller(pin);
|
|
unsigned mask = pin_to_mask(pin);
|
|
|
|
if (!pio)
|
|
return -EINVAL;
|
|
|
|
__raw_writel(mask, pio + (is_on ? PIO_MDER : PIO_MDDR));
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(at91_set_multi_drive);
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* assuming the pin is muxed as a gpio output, set its value.
|
|
*/
|
|
int at91_set_gpio_value(unsigned pin, int value)
|
|
{
|
|
void __iomem *pio = pin_to_controller(pin);
|
|
unsigned mask = pin_to_mask(pin);
|
|
|
|
if (!pio)
|
|
return -EINVAL;
|
|
__raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(at91_set_gpio_value);
|
|
|
|
|
|
/*
|
|
* read the pin's value (works even if it's not muxed as a gpio).
|
|
*/
|
|
int at91_get_gpio_value(unsigned pin)
|
|
{
|
|
void __iomem *pio = pin_to_controller(pin);
|
|
unsigned mask = pin_to_mask(pin);
|
|
u32 pdsr;
|
|
|
|
if (!pio)
|
|
return -EINVAL;
|
|
pdsr = __raw_readl(pio + PIO_PDSR);
|
|
return (pdsr & mask) != 0;
|
|
}
|
|
EXPORT_SYMBOL(at91_get_gpio_value);
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static u32 wakeups[MAX_GPIO_BANKS];
|
|
static u32 backups[MAX_GPIO_BANKS];
|
|
|
|
static int gpio_irq_set_wake(unsigned pin, unsigned state)
|
|
{
|
|
unsigned mask = pin_to_mask(pin);
|
|
unsigned bank = (pin - PIN_BASE) / 32;
|
|
|
|
if (unlikely(bank >= MAX_GPIO_BANKS))
|
|
return -EINVAL;
|
|
|
|
if (state)
|
|
wakeups[bank] |= mask;
|
|
else
|
|
wakeups[bank] &= ~mask;
|
|
|
|
set_irq_wake(gpio[bank].id, state);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void at91_gpio_suspend(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < gpio_banks; i++) {
|
|
u32 pio = gpio[i].offset;
|
|
|
|
backups[i] = at91_sys_read(pio + PIO_IMR);
|
|
at91_sys_write(pio + PIO_IDR, backups[i]);
|
|
at91_sys_write(pio + PIO_IER, wakeups[i]);
|
|
|
|
if (!wakeups[i])
|
|
clk_disable(gpio[i].clock);
|
|
else {
|
|
#ifdef CONFIG_PM_DEBUG
|
|
printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", 'A'+i, wakeups[i]);
|
|
#endif
|
|
}
|
|
}
|
|
}
|
|
|
|
void at91_gpio_resume(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < gpio_banks; i++) {
|
|
u32 pio = gpio[i].offset;
|
|
|
|
if (!wakeups[i])
|
|
clk_enable(gpio[i].clock);
|
|
|
|
at91_sys_write(pio + PIO_IDR, wakeups[i]);
|
|
at91_sys_write(pio + PIO_IER, backups[i]);
|
|
}
|
|
}
|
|
|
|
#else
|
|
#define gpio_irq_set_wake NULL
|
|
#endif
|
|
|
|
|
|
/* Several AIC controller irqs are dispatched through this GPIO handler.
|
|
* To use any AT91_PIN_* as an externally triggered IRQ, first call
|
|
* at91_set_gpio_input() then maybe enable its glitch filter.
|
|
* Then just request_irq() with the pin ID; it works like any ARM IRQ
|
|
* handler, though it always triggers on rising and falling edges.
|
|
*
|
|
* Alternatively, certain pins may be used directly as IRQ0..IRQ6 after
|
|
* configuring them with at91_set_a_periph() or at91_set_b_periph().
|
|
* IRQ0..IRQ6 should be configurable, e.g. level vs edge triggering.
|
|
*/
|
|
|
|
static void gpio_irq_mask(unsigned pin)
|
|
{
|
|
void __iomem *pio = pin_to_controller(pin);
|
|
unsigned mask = pin_to_mask(pin);
|
|
|
|
if (pio)
|
|
__raw_writel(mask, pio + PIO_IDR);
|
|
}
|
|
|
|
static void gpio_irq_unmask(unsigned pin)
|
|
{
|
|
void __iomem *pio = pin_to_controller(pin);
|
|
unsigned mask = pin_to_mask(pin);
|
|
|
|
if (pio)
|
|
__raw_writel(mask, pio + PIO_IER);
|
|
}
|
|
|
|
static int gpio_irq_type(unsigned pin, unsigned type)
|
|
{
|
|
return (type == IRQT_BOTHEDGE) ? 0 : -EINVAL;
|
|
}
|
|
|
|
static struct irq_chip gpio_irqchip = {
|
|
.name = "GPIO",
|
|
.mask = gpio_irq_mask,
|
|
.unmask = gpio_irq_unmask,
|
|
.set_type = gpio_irq_type,
|
|
.set_wake = gpio_irq_set_wake,
|
|
};
|
|
|
|
static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
|
|
{
|
|
unsigned pin;
|
|
struct irq_desc *gpio;
|
|
void __iomem *pio;
|
|
u32 isr;
|
|
|
|
pio = get_irq_chip_data(irq);
|
|
|
|
/* temporarily mask (level sensitive) parent IRQ */
|
|
desc->chip->ack(irq);
|
|
for (;;) {
|
|
/* reading ISR acks the pending (edge triggered) GPIO interrupt */
|
|
isr = __raw_readl(pio + PIO_ISR) & __raw_readl(pio + PIO_IMR);
|
|
if (!isr)
|
|
break;
|
|
|
|
pin = (unsigned) get_irq_data(irq);
|
|
gpio = &irq_desc[pin];
|
|
|
|
while (isr) {
|
|
if (isr & 1) {
|
|
if (unlikely(gpio->depth)) {
|
|
/*
|
|
* The core ARM interrupt handler lazily disables IRQs so
|
|
* another IRQ must be generated before it actually gets
|
|
* here to be disabled on the GPIO controller.
|
|
*/
|
|
gpio_irq_mask(pin);
|
|
}
|
|
else
|
|
desc_handle_irq(pin, gpio);
|
|
}
|
|
pin++;
|
|
gpio++;
|
|
isr >>= 1;
|
|
}
|
|
}
|
|
desc->chip->unmask(irq);
|
|
/* now it may re-trigger */
|
|
}
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* Called from the processor-specific init to enable GPIO interrupt support.
|
|
*/
|
|
void __init at91_gpio_irq_setup(void)
|
|
{
|
|
unsigned pioc, pin;
|
|
|
|
for (pioc = 0, pin = PIN_BASE;
|
|
pioc < gpio_banks;
|
|
pioc++) {
|
|
void __iomem *controller;
|
|
unsigned id = gpio[pioc].id;
|
|
unsigned i;
|
|
|
|
clk_enable(gpio[pioc].clock); /* enable PIO controller's clock */
|
|
|
|
controller = (void __iomem *) AT91_VA_BASE_SYS + gpio[pioc].offset;
|
|
__raw_writel(~0, controller + PIO_IDR);
|
|
|
|
set_irq_data(id, (void *) pin);
|
|
set_irq_chip_data(id, controller);
|
|
|
|
for (i = 0; i < 32; i++, pin++) {
|
|
/*
|
|
* Can use the "simple" and not "edge" handler since it's
|
|
* shorter, and the AIC handles interupts sanely.
|
|
*/
|
|
set_irq_chip(pin, &gpio_irqchip);
|
|
set_irq_handler(pin, handle_simple_irq);
|
|
set_irq_flags(pin, IRQF_VALID);
|
|
}
|
|
|
|
set_irq_chained_handler(id, gpio_irq_handler);
|
|
}
|
|
pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, gpio_banks);
|
|
}
|
|
|
|
/*
|
|
* Called from the processor-specific init to enable GPIO pin support.
|
|
*/
|
|
void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks)
|
|
{
|
|
BUG_ON(nr_banks > MAX_GPIO_BANKS);
|
|
|
|
gpio = data;
|
|
gpio_banks = nr_banks;
|
|
}
|