linux/arch/x86/kernel/pci-dma.c
Linus Torvalds 5f34fe1cfc Merge branch 'core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (63 commits)
  stacktrace: provide save_stack_trace_tsk() weak alias
  rcu: provide RCU options on non-preempt architectures too
  printk: fix discarding message when recursion_bug
  futex: clean up futex_(un)lock_pi fault handling
  "Tree RCU": scalable classic RCU implementation
  futex: rename field in futex_q to clarify single waiter semantics
  x86/swiotlb: add default swiotlb_arch_range_needs_mapping
  x86/swiotlb: add default phys<->bus conversion
  x86: unify pci iommu setup and allow swiotlb to compile for 32 bit
  x86: add swiotlb allocation functions
  swiotlb: consolidate swiotlb info message printing
  swiotlb: support bouncing of HighMem pages
  swiotlb: factor out copy to/from device
  swiotlb: add arch hook to force mapping
  swiotlb: allow architectures to override phys<->bus<->phys conversions
  swiotlb: add comment where we handle the overflow of a dma mask on 32 bit
  rcu: fix rcutorture behavior during reboot
  resources: skip sanity check of busy resources
  swiotlb: move some definitions to header
  swiotlb: allow architectures to override swiotlb pool allocation
  ...

Fix up trivial conflicts in
  arch/x86/kernel/Makefile
  arch/x86/mm/init_32.c
  include/linux/hardirq.h
as per Ingo's suggestions.
2008-12-30 16:10:19 -08:00

299 lines
6.4 KiB
C

#include <linux/dma-mapping.h>
#include <linux/dmar.h>
#include <linux/bootmem.h>
#include <linux/pci.h>
#include <asm/proto.h>
#include <asm/dma.h>
#include <asm/iommu.h>
#include <asm/gart.h>
#include <asm/calgary.h>
#include <asm/amd_iommu.h>
static int forbid_dac __read_mostly;
struct dma_mapping_ops *dma_ops;
EXPORT_SYMBOL(dma_ops);
static int iommu_sac_force __read_mostly;
#ifdef CONFIG_IOMMU_DEBUG
int panic_on_overflow __read_mostly = 1;
int force_iommu __read_mostly = 1;
#else
int panic_on_overflow __read_mostly = 0;
int force_iommu __read_mostly = 0;
#endif
int iommu_merge __read_mostly = 0;
int no_iommu __read_mostly;
/* Set this to 1 if there is a HW IOMMU in the system */
int iommu_detected __read_mostly = 0;
dma_addr_t bad_dma_address __read_mostly = 0;
EXPORT_SYMBOL(bad_dma_address);
/* Dummy device used for NULL arguments (normally ISA). Better would
be probably a smaller DMA mask, but this is bug-to-bug compatible
to older i386. */
struct device x86_dma_fallback_dev = {
.bus_id = "fallback device",
.coherent_dma_mask = DMA_32BIT_MASK,
.dma_mask = &x86_dma_fallback_dev.coherent_dma_mask,
};
EXPORT_SYMBOL(x86_dma_fallback_dev);
int dma_set_mask(struct device *dev, u64 mask)
{
if (!dev->dma_mask || !dma_supported(dev, mask))
return -EIO;
*dev->dma_mask = mask;
return 0;
}
EXPORT_SYMBOL(dma_set_mask);
#ifdef CONFIG_X86_64
static __initdata void *dma32_bootmem_ptr;
static unsigned long dma32_bootmem_size __initdata = (128ULL<<20);
static int __init parse_dma32_size_opt(char *p)
{
if (!p)
return -EINVAL;
dma32_bootmem_size = memparse(p, &p);
return 0;
}
early_param("dma32_size", parse_dma32_size_opt);
void __init dma32_reserve_bootmem(void)
{
unsigned long size, align;
if (max_pfn <= MAX_DMA32_PFN)
return;
/*
* check aperture_64.c allocate_aperture() for reason about
* using 512M as goal
*/
align = 64ULL<<20;
size = roundup(dma32_bootmem_size, align);
dma32_bootmem_ptr = __alloc_bootmem_nopanic(size, align,
512ULL<<20);
if (dma32_bootmem_ptr)
dma32_bootmem_size = size;
else
dma32_bootmem_size = 0;
}
static void __init dma32_free_bootmem(void)
{
if (max_pfn <= MAX_DMA32_PFN)
return;
if (!dma32_bootmem_ptr)
return;
free_bootmem(__pa(dma32_bootmem_ptr), dma32_bootmem_size);
dma32_bootmem_ptr = NULL;
dma32_bootmem_size = 0;
}
#endif
void __init pci_iommu_alloc(void)
{
#ifdef CONFIG_X86_64
/* free the range so iommu could get some range less than 4G */
dma32_free_bootmem();
#endif
/*
* The order of these functions is important for
* fall-back/fail-over reasons
*/
gart_iommu_hole_init();
detect_calgary();
detect_intel_iommu();
amd_iommu_detect();
pci_swiotlb_init();
}
void *dma_generic_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_addr, gfp_t flag)
{
unsigned long dma_mask;
struct page *page;
dma_addr_t addr;
dma_mask = dma_alloc_coherent_mask(dev, flag);
flag |= __GFP_ZERO;
again:
page = alloc_pages_node(dev_to_node(dev), flag, get_order(size));
if (!page)
return NULL;
addr = page_to_phys(page);
if (!is_buffer_dma_capable(dma_mask, addr, size)) {
__free_pages(page, get_order(size));
if (dma_mask < DMA_32BIT_MASK && !(flag & GFP_DMA)) {
flag = (flag & ~GFP_DMA32) | GFP_DMA;
goto again;
}
return NULL;
}
*dma_addr = addr;
return page_address(page);
}
/*
* See <Documentation/x86_64/boot-options.txt> for the iommu kernel parameter
* documentation.
*/
static __init int iommu_setup(char *p)
{
iommu_merge = 1;
if (!p)
return -EINVAL;
while (*p) {
if (!strncmp(p, "off", 3))
no_iommu = 1;
/* gart_parse_options has more force support */
if (!strncmp(p, "force", 5))
force_iommu = 1;
if (!strncmp(p, "noforce", 7)) {
iommu_merge = 0;
force_iommu = 0;
}
if (!strncmp(p, "biomerge", 8)) {
iommu_merge = 1;
force_iommu = 1;
}
if (!strncmp(p, "panic", 5))
panic_on_overflow = 1;
if (!strncmp(p, "nopanic", 7))
panic_on_overflow = 0;
if (!strncmp(p, "merge", 5)) {
iommu_merge = 1;
force_iommu = 1;
}
if (!strncmp(p, "nomerge", 7))
iommu_merge = 0;
if (!strncmp(p, "forcesac", 8))
iommu_sac_force = 1;
if (!strncmp(p, "allowdac", 8))
forbid_dac = 0;
if (!strncmp(p, "nodac", 5))
forbid_dac = -1;
if (!strncmp(p, "usedac", 6)) {
forbid_dac = -1;
return 1;
}
#ifdef CONFIG_SWIOTLB
if (!strncmp(p, "soft", 4))
swiotlb = 1;
#endif
gart_parse_options(p);
#ifdef CONFIG_CALGARY_IOMMU
if (!strncmp(p, "calgary", 7))
use_calgary = 1;
#endif /* CONFIG_CALGARY_IOMMU */
p += strcspn(p, ",");
if (*p == ',')
++p;
}
return 0;
}
early_param("iommu", iommu_setup);
int dma_supported(struct device *dev, u64 mask)
{
struct dma_mapping_ops *ops = get_dma_ops(dev);
#ifdef CONFIG_PCI
if (mask > 0xffffffff && forbid_dac > 0) {
dev_info(dev, "PCI: Disallowing DAC for device\n");
return 0;
}
#endif
if (ops->dma_supported)
return ops->dma_supported(dev, mask);
/* Copied from i386. Doesn't make much sense, because it will
only work for pci_alloc_coherent.
The caller just has to use GFP_DMA in this case. */
if (mask < DMA_24BIT_MASK)
return 0;
/* Tell the device to use SAC when IOMMU force is on. This
allows the driver to use cheaper accesses in some cases.
Problem with this is that if we overflow the IOMMU area and
return DAC as fallback address the device may not handle it
correctly.
As a special case some controllers have a 39bit address
mode that is as efficient as 32bit (aic79xx). Don't force
SAC for these. Assume all masks <= 40 bits are of this
type. Normally this doesn't make any difference, but gives
more gentle handling of IOMMU overflow. */
if (iommu_sac_force && (mask >= DMA_40BIT_MASK)) {
dev_info(dev, "Force SAC with mask %Lx\n", mask);
return 0;
}
return 1;
}
EXPORT_SYMBOL(dma_supported);
static int __init pci_iommu_init(void)
{
calgary_iommu_init();
intel_iommu_init();
amd_iommu_init();
gart_iommu_init();
no_iommu_init();
return 0;
}
void pci_iommu_shutdown(void)
{
gart_iommu_shutdown();
}
/* Must execute after PCI subsystem */
fs_initcall(pci_iommu_init);
#ifdef CONFIG_PCI
/* Many VIA bridges seem to corrupt data for DAC. Disable it here */
static __devinit void via_no_dac(struct pci_dev *dev)
{
if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && forbid_dac == 0) {
printk(KERN_INFO
"PCI: VIA PCI bridge detected. Disabling DAC.\n");
forbid_dac = 1;
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_ANY_ID, via_no_dac);
#endif