q3k/linux
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
linux/drivers/net/usb/pegasus.h
Petko Manolov 7c1d15d736 pegasus: Add new device ID. 
Add new definition to 'pegasus.h' for support Japanese IO DATA
"ETX-US2" USB Ethernet Adapter.

PEGASUS_DEV( “IO DATA USB ETX-US2”, VENDOR_IODATA, 0x092a,
DEFAULT_GPIO_RESET | PEGASUS_II )

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14 16:41:17 -07:00

309 lines
10 KiB
C
Raw Blame History

/*
* Copyright (c) 1999-2003 Petko Manolov - Petkan (petkan@users.sourceforge.net)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#ifndef PEGASUS_DEV
#define PEGASUS_II 0x80000000
#define HAS_HOME_PNA 0x40000000
#define PEGASUS_MTU 1536
#define RX_SKBS 4
#define EPROM_WRITE 0x01
#define EPROM_READ 0x02
#define EPROM_DONE 0x04
#define EPROM_WR_ENABLE 0x10
#define EPROM_LOAD 0x20
#define PHY_DONE 0x80
#define PHY_READ 0x40
#define PHY_WRITE 0x20
#define DEFAULT_GPIO_RESET 0x24
#define DEFAULT_GPIO_SET 0x26
#define PEGASUS_PRESENT 0x00000001
#define PEGASUS_TX_BUSY 0x00000004
#define PEGASUS_RX_BUSY 0x00000008
#define CTRL_URB_RUNNING 0x00000010
#define CTRL_URB_SLEEP 0x00000020
#define PEGASUS_UNPLUG 0x00000040
#define PEGASUS_RX_URB_FAIL 0x00000080
#define ETH_REGS_CHANGE 0x40000000
#define ETH_REGS_CHANGED 0x80000000
#define RX_MULTICAST 2
#define RX_PROMISCUOUS 4
#define REG_TIMEOUT (HZ)
#define PEGASUS_TX_TIMEOUT (HZ*10)
#define TX_UNDERRUN 0x80
#define EXCESSIVE_COL 0x40
#define LATE_COL 0x20
#define NO_CARRIER 0x10
#define LOSS_CARRIER 0x08
#define JABBER_TIMEOUT 0x04
#define LINK_STATUS 0x01
#define PEGASUS_REQT_READ 0xc0
#define PEGASUS_REQT_WRITE 0x40
#define PEGASUS_REQ_GET_REGS 0xf0
#define PEGASUS_REQ_SET_REGS 0xf1
#define PEGASUS_REQ_SET_REG PEGASUS_REQ_SET_REGS
enum pegasus_registers {
EthCtrl0 = 0,
EthCtrl1 = 1,
EthCtrl2 = 2,
EthID = 0x10,
Reg1d = 0x1d,
EpromOffset = 0x20,
EpromData = 0x21, /* 0x21 low, 0x22 high byte */
EpromCtrl = 0x23,
PhyAddr = 0x25,
PhyData = 0x26, /* 0x26 low, 0x27 high byte */
PhyCtrl = 0x28,
UsbStst = 0x2a,
EthTxStat0 = 0x2b,
EthTxStat1 = 0x2c,
EthRxStat = 0x2d,
WakeupControl = 0x78,
Reg7b = 0x7b,
Gpio0 = 0x7e,
Gpio1 = 0x7f,
Reg81 = 0x81,
};
typedef struct pegasus {
struct usb_device *usb;
struct usb_interface *intf;
struct net_device *net;
struct net_device_stats stats;
struct mii_if_info mii;
unsigned flags;
unsigned features;
u32 msg_enable;
u32 wolopts;
int dev_index;
int intr_interval;
struct tasklet_struct rx_tl;
struct delayed_work carrier_check;
struct urb *ctrl_urb, *rx_urb, *tx_urb, *intr_urb;
struct sk_buff *rx_pool[RX_SKBS];
struct sk_buff *rx_skb;
struct usb_ctrlrequest dr;
wait_queue_head_t ctrl_wait;
spinlock_t rx_pool_lock;
int chip;
unsigned char intr_buff[8];
__u8 tx_buff[PEGASUS_MTU];
__u8 eth_regs[4];
__u8 phy;
__u8 gpio_res;
} pegasus_t;
struct usb_eth_dev {
char *name;
__u16 vendor;
__u16 device;
__u32 private; /* LSB is gpio reset value */
};
#define VENDOR_3COM 0x0506
#define VENDOR_ABOCOM 0x07b8
#define VENDOR_ACCTON 0x083a
#define VENDOR_ADMTEK 0x07a6
#define VENDOR_AEILAB 0x3334
#define VENDOR_ALLIEDTEL 0x07c9
#define VENDOR_ATEN 0x0557
#define VENDOR_BELKIN 0x050d
#define VENDOR_BILLIONTON 0x08dd
#define VENDOR_COMPAQ 0x049f
#define VENDOR_COREGA 0x07aa
#define VENDOR_DLINK 0x2001
#define VENDOR_ELCON 0x0db7
#define VENDOR_ELECOM 0x056e
#define VENDOR_ELSA 0x05cc
#define VENDOR_GIGABYTE 0x1044
#define VENDOR_HAWKING 0x0e66
#define VENDOR_HP 0x03f0
#define VENDOR_IODATA 0x04bb
#define VENDOR_KINGSTON 0x0951
#define VENDOR_LANEED 0x056e
#define VENDOR_LINKSYS 0x066b
#define VENDOR_LINKSYS2 0x077b
#define VENDOR_MELCO 0x0411
#define VENDOR_MICROSOFT 0x045e
#define VENDOR_MOBILITY 0x1342
#define VENDOR_NETGEAR 0x0846
#define VENDOR_OCT 0x0b39
#define VENDOR_SMARTBRIDGES 0x08d1
#define VENDOR_SMC 0x0707
#define VENDOR_SOHOWARE 0x15e8
#define VENDOR_SIEMENS 0x067c
#else /* PEGASUS_DEV */
PEGASUS_DEV( "3Com USB Ethernet 3C460B", VENDOR_3COM, 0x4601,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "ATEN USB Ethernet UC-110T", VENDOR_ATEN, 0x2007,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "USB HPNA/Ethernet", VENDOR_ABOCOM, 0x110c,
DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA )
PEGASUS_DEV( "USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4104,
DEFAULT_GPIO_RESET | HAS_HOME_PNA )
PEGASUS_DEV( "USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4004,
DEFAULT_GPIO_RESET | HAS_HOME_PNA )
PEGASUS_DEV( "USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4007,
DEFAULT_GPIO_RESET | HAS_HOME_PNA )
PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x4102,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x4002,
DEFAULT_GPIO_RESET )
PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x400b,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x400c,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0xabc1,
DEFAULT_GPIO_RESET )
PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x200c,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "Accton USB 10/100 Ethernet Adapter", VENDOR_ACCTON, 0x1046,
DEFAULT_GPIO_RESET )
PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_ACCTON, 0x5046,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "Philips USB 10/100 Ethernet", VENDOR_ACCTON, 0xb004,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "ADMtek ADM8511 \"Pegasus II\" USB Ethernet",
VENDOR_ADMTEK, 0x8511,
DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA )
PEGASUS_DEV( "ADMtek ADM8513 \"Pegasus II\" USB Ethernet",
VENDOR_ADMTEK, 0x8513,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "ADMtek ADM8515 \"Pegasus II\" USB-2.0 Ethernet",
VENDOR_ADMTEK, 0x8515,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "ADMtek AN986 \"Pegasus\" USB Ethernet (evaluation board)",
VENDOR_ADMTEK, 0x0986,
DEFAULT_GPIO_RESET | HAS_HOME_PNA )
PEGASUS_DEV( "AN986A USB MAC", VENDOR_ADMTEK, 1986,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "AEI USB Fast Ethernet Adapter", VENDOR_AEILAB, 0x1701,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "Allied Telesyn Int. AT-USB100", VENDOR_ALLIEDTEL, 0xb100,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "Belkin F5D5050 USB Ethernet", VENDOR_BELKIN, 0x0121,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "Billionton USB-100", VENDOR_BILLIONTON, 0x0986,
DEFAULT_GPIO_RESET )
PEGASUS_DEV( "Billionton USBLP-100", VENDOR_BILLIONTON, 0x0987,
DEFAULT_GPIO_RESET | HAS_HOME_PNA )
PEGASUS_DEV( "iPAQ Networking 10/100 USB", VENDOR_COMPAQ, 0x8511,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "Billionton USBEL-100", VENDOR_BILLIONTON, 0x0988,
DEFAULT_GPIO_RESET )
PEGASUS_DEV( "Billionton USBE-100", VENDOR_BILLIONTON, 0x8511,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "Corega FEther USB-TX", VENDOR_COREGA, 0x0004,
DEFAULT_GPIO_RESET )
PEGASUS_DEV( "Corega FEther USB-TXS", VENDOR_COREGA, 0x000d,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x4001,
DEFAULT_GPIO_RESET )
PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x4002,
DEFAULT_GPIO_RESET )
PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x4102,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x400b,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x200c,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "D-Link DSB-650TX(PNA)", VENDOR_DLINK, 0x4003,
DEFAULT_GPIO_RESET | HAS_HOME_PNA )
PEGASUS_DEV( "D-Link DSB-650", VENDOR_DLINK, 0xabc1,
DEFAULT_GPIO_RESET )
PEGASUS_DEV( "GOLDPFEIL USB Adapter", VENDOR_ELCON, 0x0002,
DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA )
PEGASUS_DEV( "ELECOM USB Ethernet LD-USB20", VENDOR_ELECOM, 0x4010,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "EasiDock Ethernet", VENDOR_MOBILITY, 0x0304,
DEFAULT_GPIO_RESET )
PEGASUS_DEV( "Elsa Micolink USB2Ethernet", VENDOR_ELSA, 0x3000,
DEFAULT_GPIO_RESET )
PEGASUS_DEV( "GIGABYTE GN-BR402W Wireless Router", VENDOR_GIGABYTE, 0x8002,
DEFAULT_GPIO_RESET )
PEGASUS_DEV( "Hawking UF100 10/100 Ethernet", VENDOR_HAWKING, 0x400c,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "HP hn210c Ethernet USB", VENDOR_HP, 0x811c,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "IO DATA USB ET/TX", VENDOR_IODATA, 0x0904,
DEFAULT_GPIO_RESET )
PEGASUS_DEV( "IO DATA USB ET/TX-S", VENDOR_IODATA, 0x0913,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "IO DATA USB ETX-US2", VENDOR_IODATA, 0x092a,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "Kingston KNU101TX Ethernet", VENDOR_KINGSTON, 0x000a,
DEFAULT_GPIO_RESET)
PEGASUS_DEV( "LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x4002,
DEFAULT_GPIO_RESET )
PEGASUS_DEV( "LANEED USB Ethernet LD-USBL/TX", VENDOR_LANEED, 0x4005,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV( "LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x400b,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "LANEED USB Ethernet LD-USB/T", VENDOR_LANEED, 0xabc1,
DEFAULT_GPIO_RESET )
PEGASUS_DEV( "LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x200c,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "Linksys USB10TX", VENDOR_LINKSYS, 0x2202,
DEFAULT_GPIO_RESET )
PEGASUS_DEV( "Linksys USB100TX", VENDOR_LINKSYS, 0x2203,
DEFAULT_GPIO_RESET )
PEGASUS_DEV( "Linksys USB100TX", VENDOR_LINKSYS, 0x2204,
DEFAULT_GPIO_RESET | HAS_HOME_PNA )
PEGASUS_DEV( "Linksys USB10T Ethernet Adapter", VENDOR_LINKSYS, 0x2206,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV( "Linksys USBVPN1", VENDOR_LINKSYS2, 0x08b4,
DEFAULT_GPIO_RESET )
PEGASUS_DEV( "Linksys USB USB100TX", VENDOR_LINKSYS, 0x400b,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "Linksys USB10TX", VENDOR_LINKSYS, 0x200c,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "MELCO/BUFFALO LUA-TX", VENDOR_MELCO, 0x0001,
DEFAULT_GPIO_RESET )
PEGASUS_DEV( "MELCO/BUFFALO LUA-TX", VENDOR_MELCO, 0x0005,
DEFAULT_GPIO_RESET )
PEGASUS_DEV( "MELCO/BUFFALO LUA2-TX", VENDOR_MELCO, 0x0009,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "Microsoft MN-110", VENDOR_MICROSOFT, 0x007a,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "NETGEAR FA101", VENDOR_NETGEAR, 0x1020,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "OCT Inc.", VENDOR_OCT, 0x0109,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "OCT USB TO Ethernet", VENDOR_OCT, 0x0901,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "smartNIC 2 PnP Adapter", VENDOR_SMARTBRIDGES, 0x0003,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "SMC 202 USB Ethernet", VENDOR_SMC, 0x0200,
DEFAULT_GPIO_RESET )
PEGASUS_DEV( "SMC 2206 USB Ethernet", VENDOR_SMC, 0x0201,
DEFAULT_GPIO_RESET | PEGASUS_II)
PEGASUS_DEV( "SOHOware NUB100 Ethernet", VENDOR_SOHOWARE, 0x9100,
DEFAULT_GPIO_RESET )
PEGASUS_DEV( "SOHOware NUB110 Ethernet", VENDOR_SOHOWARE, 0x9110,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_SIEMENS, 0x1001,
DEFAULT_GPIO_RESET | PEGASUS_II )
#endif /* PEGASUS_DEV */
Reference in a new issue View git blame Copy permalink