linux/drivers/mfd/viperboard.c
Lars Poeschel 302b95621d mfd: viperboard: Do version query in dma memory
The query for the viperboard version was done with memory buffer
on the stack but usb transfers need dma capable memory buffer.
This is fixed now.

Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-26 11:48:56 +01:00

137 lines
3.3 KiB
C

/*
* Nano River Technologies viperboard driver
*
* This is the core driver for the viperboard. There are cell drivers
* available for I2C, ADC and both GPIOs. SPI is not yet supported.
* The drivers do not support all features the board exposes. See user
* manual of the viperboard.
*
* (C) 2012 by Lemonage GmbH
* Author: Lars Poeschel <poeschel@lemonage.de>
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/mutex.h>
#include <linux/mfd/core.h>
#include <linux/mfd/viperboard.h>
#include <linux/usb.h>
static const struct usb_device_id vprbrd_table[] = {
{ USB_DEVICE(0x2058, 0x1005) }, /* Nano River Technologies */
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, vprbrd_table);
static struct mfd_cell vprbrd_devs[] = {
{
.name = "viperboard-gpio",
},
{
.name = "viperboard-i2c",
},
{
.name = "viperboard-adc",
},
};
static int vprbrd_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{
struct vprbrd *vb;
u16 version = 0;
int pipe, ret;
/* allocate memory for our device state and initialize it */
vb = kzalloc(sizeof(*vb), GFP_KERNEL);
if (vb == NULL) {
dev_err(&interface->dev, "Out of memory\n");
return -ENOMEM;
}
mutex_init(&vb->lock);
vb->usb_dev = usb_get_dev(interface_to_usbdev(interface));
/* save our data pointer in this interface device */
usb_set_intfdata(interface, vb);
dev_set_drvdata(&vb->pdev.dev, vb);
/* get version information, major first, minor then */
pipe = usb_rcvctrlpipe(vb->usb_dev, 0);
ret = usb_control_msg(vb->usb_dev, pipe, VPRBRD_USB_REQUEST_MAJOR,
VPRBRD_USB_TYPE_IN, 0x0000, 0x0000, vb->buf, 1,
VPRBRD_USB_TIMEOUT_MS);
if (ret == 1)
version = vb->buf[0];
ret = usb_control_msg(vb->usb_dev, pipe, VPRBRD_USB_REQUEST_MINOR,
VPRBRD_USB_TYPE_IN, 0x0000, 0x0000, vb->buf, 1,
VPRBRD_USB_TIMEOUT_MS);
if (ret == 1) {
version <<= 8;
version = version | vb->buf[0];
}
dev_info(&interface->dev,
"version %x.%02x found at bus %03d address %03d\n",
version >> 8, version & 0xff,
vb->usb_dev->bus->busnum, vb->usb_dev->devnum);
ret = mfd_add_devices(&interface->dev, -1, vprbrd_devs,
ARRAY_SIZE(vprbrd_devs), NULL, 0, NULL);
if (ret != 0) {
dev_err(&interface->dev, "Failed to add mfd devices to core.");
goto error;
}
return 0;
error:
if (vb) {
usb_put_dev(vb->usb_dev);
kfree(vb);
}
return ret;
}
static void vprbrd_disconnect(struct usb_interface *interface)
{
struct vprbrd *vb = usb_get_intfdata(interface);
mfd_remove_devices(&interface->dev);
usb_set_intfdata(interface, NULL);
usb_put_dev(vb->usb_dev);
kfree(vb);
dev_dbg(&interface->dev, "disconnected\n");
}
static struct usb_driver vprbrd_driver = {
.name = "viperboard",
.probe = vprbrd_probe,
.disconnect = vprbrd_disconnect,
.id_table = vprbrd_table,
};
module_usb_driver(vprbrd_driver);
MODULE_DESCRIPTION("Nano River Technologies viperboard mfd core driver");
MODULE_AUTHOR("Lars Poeschel <poeschel@lemonage.de>");
MODULE_LICENSE("GPL");