linux/net/ax25/ax25_ip.c
Tim Schmielau cd354f1ae7 [PATCH] remove many unneeded #includes of sched.h
After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:54 -08:00

231 lines
5.1 KiB
C

/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* Copyright (C) Jonathan Naylor G4KLX (g4klx@g4klx.demon.co.uk)
*/
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/socket.h>
#include <linux/in.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/timer.h>
#include <linux/string.h>
#include <linux/sockios.h>
#include <linux/net.h>
#include <net/ax25.h>
#include <linux/inet.h>
#include <linux/netdevice.h>
#include <linux/if_arp.h>
#include <linux/skbuff.h>
#include <net/sock.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <linux/fcntl.h>
#include <linux/termios.h> /* For TIOCINQ/OUTQ */
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/notifier.h>
#include <linux/proc_fs.h>
#include <linux/stat.h>
#include <linux/netfilter.h>
#include <linux/sysctl.h>
#include <net/ip.h>
#include <net/arp.h>
/*
* IP over AX.25 encapsulation.
*/
/*
* Shove an AX.25 UI header on an IP packet and handle ARP
*/
#ifdef CONFIG_INET
int ax25_hard_header(struct sk_buff *skb, struct net_device *dev, unsigned short type, void *daddr, void *saddr, unsigned len)
{
unsigned char *buff;
/* they sometimes come back to us... */
if (type == ETH_P_AX25)
return 0;
/* header is an AX.25 UI frame from us to them */
buff = skb_push(skb, AX25_HEADER_LEN);
*buff++ = 0x00; /* KISS DATA */
if (daddr != NULL)
memcpy(buff, daddr, dev->addr_len); /* Address specified */
buff[6] &= ~AX25_CBIT;
buff[6] &= ~AX25_EBIT;
buff[6] |= AX25_SSSID_SPARE;
buff += AX25_ADDR_LEN;
if (saddr != NULL)
memcpy(buff, saddr, dev->addr_len);
else
memcpy(buff, dev->dev_addr, dev->addr_len);
buff[6] &= ~AX25_CBIT;
buff[6] |= AX25_EBIT;
buff[6] |= AX25_SSSID_SPARE;
buff += AX25_ADDR_LEN;
*buff++ = AX25_UI; /* UI */
/* Append a suitable AX.25 PID */
switch (type) {
case ETH_P_IP:
*buff++ = AX25_P_IP;
break;
case ETH_P_ARP:
*buff++ = AX25_P_ARP;
break;
default:
printk(KERN_ERR "AX.25: ax25_hard_header - wrong protocol type 0x%2.2x\n", type);
*buff++ = 0;
break;
}
if (daddr != NULL)
return AX25_HEADER_LEN;
return -AX25_HEADER_LEN; /* Unfinished header */
}
int ax25_rebuild_header(struct sk_buff *skb)
{
struct sk_buff *ourskb;
unsigned char *bp = skb->data;
ax25_route *route;
struct net_device *dev = NULL;
ax25_address *src, *dst;
ax25_digi *digipeat = NULL;
ax25_dev *ax25_dev;
ax25_cb *ax25;
char ip_mode = ' ';
dst = (ax25_address *)(bp + 1);
src = (ax25_address *)(bp + 8);
if (arp_find(bp + 1, skb))
return 1;
route = ax25_get_route(dst, NULL);
if (route) {
digipeat = route->digipeat;
dev = route->dev;
ip_mode = route->ip_mode;
};
if (dev == NULL)
dev = skb->dev;
if ((ax25_dev = ax25_dev_ax25dev(dev)) == NULL) {
goto put;
}
if (bp[16] == AX25_P_IP) {
if (ip_mode == 'V' || (ip_mode == ' ' && ax25_dev->values[AX25_VALUES_IPDEFMODE])) {
/*
* We copy the buffer and release the original thereby
* keeping it straight
*
* Note: we report 1 back so the caller will
* not feed the frame direct to the physical device
* We don't want that to happen. (It won't be upset
* as we have pulled the frame from the queue by
* freeing it).
*
* NB: TCP modifies buffers that are still
* on a device queue, thus we use skb_copy()
* instead of using skb_clone() unless this
* gets fixed.
*/
ax25_address src_c;
ax25_address dst_c;
if ((ourskb = skb_copy(skb, GFP_ATOMIC)) == NULL) {
kfree_skb(skb);
goto put;
}
if (skb->sk != NULL)
skb_set_owner_w(ourskb, skb->sk);
kfree_skb(skb);
/* dl9sau: bugfix
* after kfree_skb(), dst and src which were pointer
* to bp which is part of skb->data would not be valid
* anymore hope that after skb_pull(ourskb, ..) our
* dsc_c and src_c will not become invalid
*/
bp = ourskb->data;
dst_c = *(ax25_address *)(bp + 1);
src_c = *(ax25_address *)(bp + 8);
skb_pull(ourskb, AX25_HEADER_LEN - 1); /* Keep PID */
ourskb->nh.raw = ourskb->data;
ax25=ax25_send_frame(
ourskb,
ax25_dev->values[AX25_VALUES_PACLEN],
&src_c,
&dst_c, digipeat, dev);
if (ax25) {
ax25_cb_put(ax25);
}
goto put;
}
}
bp[7] &= ~AX25_CBIT;
bp[7] &= ~AX25_EBIT;
bp[7] |= AX25_SSSID_SPARE;
bp[14] &= ~AX25_CBIT;
bp[14] |= AX25_EBIT;
bp[14] |= AX25_SSSID_SPARE;
skb_pull(skb, AX25_KISS_HEADER_LEN);
if (digipeat != NULL) {
if ((ourskb = ax25_rt_build_path(skb, src, dst, route->digipeat)) == NULL) {
kfree_skb(skb);
goto put;
}
skb = ourskb;
}
ax25_queue_xmit(skb, dev);
put:
if (route)
ax25_put_route(route);
return 1;
}
#else /* INET */
int ax25_hard_header(struct sk_buff *skb, struct net_device *dev, unsigned short type, void *daddr, void *saddr, unsigned len)
{
return -AX25_HEADER_LEN;
}
int ax25_rebuild_header(struct sk_buff *skb)
{
return 1;
}
#endif
EXPORT_SYMBOL(ax25_hard_header);
EXPORT_SYMBOL(ax25_rebuild_header);