linux/arch/powerpc/boot
David Gibson 7c40542ffa [POWERPC] Fix bug adding properties with flatdevtree.c's ft_set_prop()
ft_set_prop() from flatdevtree.c in the zImage wrapper will either
replace an existing property in the flat device tree, or add a new
property definiion if the given property isn't present.

However, when adding properties, it adds the property definition
immediately before the node's END_NODE tag, potentially after any
subnode definitions for the node.  This confuses the kernel flat tree
parser in prom.c which assumes that all property definitions for a
node come before all subnode definitions.

This patch corrects ft_set_prop() so that it adds new properties
before the first subnode, instead of before the END_NODE tag.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Scott Wood <scottwood@freescale.com>
Acked-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-17 21:11:13 +10:00
..
dts [POWERPC] Removed hardcoded phandles from dts 2007-05-17 21:10:17 +10:00
.gitignore [POWERPC] bootwrapper: Add a cuboot platform and a cuImage target 2007-04-24 21:31:54 +10:00
44x.c [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc 2007-05-08 14:47:32 +10:00
44x.h [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc 2007-05-08 14:47:32 +10:00
addnote.c
addRamDisk.c
crt0.S [POWERPC] bootwrapper: missing relocation in crt0.S 2007-04-13 03:55:16 +10:00
cuboot-83xx.c [POWERPC] U-boot passes the initrd as start/end, not start/size. 2007-05-12 11:32:48 +10:00
cuboot-85xx.c [POWERPC] U-boot passes the initrd as start/end, not start/size. 2007-05-12 11:32:48 +10:00
cuboot-ebony.c [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc 2007-05-08 14:47:32 +10:00
dcr.h [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc 2007-05-08 14:47:32 +10:00
devtree.c [POWERPC] Add dt_xlate_addr() to bootwrapper 2007-04-30 11:02:05 +10:00
div64.S
dummy.c
ebony.c [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc 2007-05-08 14:47:32 +10:00
elf.h [POWERPC] Move bootwrapper ELF parsing routines to a file 2007-04-13 03:55:16 +10:00
elf_util.c [POWERPC] Move bootwrapper ELF parsing routines to a file 2007-04-13 03:55:16 +10:00
flatdevtree.c [POWERPC] Fix bug adding properties with flatdevtree.c's ft_set_prop() 2007-05-17 21:11:13 +10:00
flatdevtree.h [POWERPC] bootwrapper: Make ft_create_node() pay attention to the parent parameter. 2007-03-16 15:49:15 +11:00
flatdevtree_env.h
flatdevtree_misc.c [POWERPC] bootwrapper: Add dt_ops methods. 2007-03-21 22:35:21 +11:00
gunzip_util.c [POWERPC] boot: More verbose gunzip error message 2007-04-27 21:13:49 +10:00
gunzip_util.h [POWERPC] Add documentation for the zImage's gunzip convenience functions 2007-03-16 16:38:19 +11:00
hack-coff.c
holly.c [POWERPC] Holly bootwrapper 2007-05-08 11:54:21 +10:00
install.sh
io.h
main.c [POWERPC] bootwrapper: Decompress less, check more 2007-04-13 03:55:17 +10:00
Makefile [POWERPC] Add bootwrapper support for Motorola PrPMC2800 platform 2007-05-12 11:32:50 +10:00
mktree.c [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc 2007-05-08 14:47:32 +10:00
mpsc.c [POWERPC] Add bootwrapper support for Marvell MPSC 2007-05-12 11:32:49 +10:00
mv64x60.c [POWERPC] Add bootwrapper support for Marvell/mv64x60 hostbridge 2007-05-12 11:32:49 +10:00
mv64x60.h [POWERPC] Add bootwrapper support for Marvell/mv64x60 hostbridge 2007-05-12 11:32:49 +10:00
mv64x60_i2c.c [POWERPC] Add bootwrapper support for Marvell/mv64x60 I2C 2007-05-12 11:32:49 +10:00
ns16550.c [POWERPC] bootwrapper: Add dt_xlate_reg(), and use it to find serial registers. 2007-04-13 03:55:15 +10:00
of.c [POWERPC] bootwrapper: Use `unsigned long' for malloc sizes 2007-04-24 22:06:54 +10:00
ops.h [POWERPC] Add bootwrapper support for Marvell MPSC 2007-05-12 11:32:49 +10:00
page.h
ppc_asm.h
ppcboot.h [POWERPC] bootwrapper: Add ppcboot.h 2007-04-24 21:31:55 +10:00
prpmc2800.c [POWERPC] Add bootwrapper support for Motorola PrPMC2800 platform 2007-05-12 11:32:50 +10:00
README
reg.h [POWERPC] New reg.h for the zImage 2007-03-26 15:11:20 +10:00
rs6000.h
serial.c [POWERPC] Add bootwrapper support for Marvell MPSC 2007-05-12 11:32:49 +10:00
simple_alloc.c [POWERPC] bootwrapper: Use `unsigned long' for malloc sizes 2007-04-24 22:06:54 +10:00
stdio.c
stdio.h [POWERPC] Add gcc format warnings to zImage printf() 2007-03-26 15:11:20 +10:00
string.h
string.S
treeboot-ebony.c [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc 2007-05-08 14:47:32 +10:00
types.h
util.S
wrapper [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc 2007-05-08 14:47:32 +10:00
zImage.coff.lds.S [POWERPC] zImage: Cleanup and improve zImage entry point 2007-03-13 13:35:03 +11:00
zImage.lds.S [POWERPC] zImage: Cleanup and improve zImage entry point 2007-03-13 13:35:03 +11:00

To extract the kernel vmlinux, System.map, .config or initrd from the zImage binary:

objcopy -j .kernel:vmlinux -O binary zImage vmlinux.gz
objcopy -j .kernel:System.map -O binary zImage System.map.gz
objcopy -j .kernel:.config -O binary zImage config.gz
objcopy -j .kernel:initrd -O binary zImage.initrd initrd.gz


	Peter