a1dca1e30a
The attached patch fixes the automute logic of saa7134. It avoids the white noise on the pulseaudio startup. (pulseaudio reads the saa7134 alsa device on startup) Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
1368 lines
36 KiB
C
1368 lines
36 KiB
C
/*
|
|
*
|
|
* device driver for philips saa7134 based TV cards
|
|
* driver core
|
|
*
|
|
* (c) 2001-03 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/list.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/kmod.h>
|
|
#include <linux/sound.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/pm.h>
|
|
|
|
#include "saa7134-reg.h"
|
|
#include "saa7134.h"
|
|
|
|
MODULE_DESCRIPTION("v4l2 driver module for saa7130/34 based TV cards");
|
|
MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION(SAA7134_VERSION);
|
|
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
|
|
static unsigned int irq_debug;
|
|
module_param(irq_debug, int, 0644);
|
|
MODULE_PARM_DESC(irq_debug,"enable debug messages [IRQ handler]");
|
|
|
|
static unsigned int core_debug;
|
|
module_param(core_debug, int, 0644);
|
|
MODULE_PARM_DESC(core_debug,"enable debug messages [core]");
|
|
|
|
static unsigned int gpio_tracking;
|
|
module_param(gpio_tracking, int, 0644);
|
|
MODULE_PARM_DESC(gpio_tracking,"enable debug messages [gpio]");
|
|
|
|
static unsigned int alsa = 1;
|
|
module_param(alsa, int, 0644);
|
|
MODULE_PARM_DESC(alsa,"enable/disable ALSA DMA sound [dmasound]");
|
|
|
|
static unsigned int latency = UNSET;
|
|
module_param(latency, int, 0444);
|
|
MODULE_PARM_DESC(latency,"pci latency timer");
|
|
|
|
int saa7134_no_overlay=-1;
|
|
module_param_named(no_overlay, saa7134_no_overlay, int, 0444);
|
|
MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
|
|
" [some VIA/SIS chipsets are known to have problem with overlay]");
|
|
|
|
static unsigned int video_nr[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET };
|
|
static unsigned int vbi_nr[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET };
|
|
static unsigned int radio_nr[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET };
|
|
static unsigned int tuner[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET };
|
|
static unsigned int card[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET };
|
|
|
|
|
|
module_param_array(video_nr, int, NULL, 0444);
|
|
module_param_array(vbi_nr, int, NULL, 0444);
|
|
module_param_array(radio_nr, int, NULL, 0444);
|
|
module_param_array(tuner, int, NULL, 0444);
|
|
module_param_array(card, int, NULL, 0444);
|
|
|
|
MODULE_PARM_DESC(video_nr, "video device number");
|
|
MODULE_PARM_DESC(vbi_nr, "vbi device number");
|
|
MODULE_PARM_DESC(radio_nr, "radio device number");
|
|
MODULE_PARM_DESC(tuner, "tuner type");
|
|
MODULE_PARM_DESC(card, "card type");
|
|
|
|
DEFINE_MUTEX(saa7134_devlist_lock);
|
|
EXPORT_SYMBOL(saa7134_devlist_lock);
|
|
LIST_HEAD(saa7134_devlist);
|
|
EXPORT_SYMBOL(saa7134_devlist);
|
|
static LIST_HEAD(mops_list);
|
|
static unsigned int saa7134_devcount;
|
|
|
|
int (*saa7134_dmasound_init)(struct saa7134_dev *dev);
|
|
int (*saa7134_dmasound_exit)(struct saa7134_dev *dev);
|
|
|
|
#define dprintk(fmt, arg...) if (core_debug) \
|
|
printk(KERN_DEBUG "%s/core: " fmt, dev->name , ## arg)
|
|
|
|
void saa7134_track_gpio(struct saa7134_dev *dev, char *msg)
|
|
{
|
|
unsigned long mode,status;
|
|
|
|
if (!gpio_tracking)
|
|
return;
|
|
/* rising SAA7134_GPIO_GPRESCAN reads the status */
|
|
saa_andorb(SAA7134_GPIO_GPMODE3,SAA7134_GPIO_GPRESCAN,0);
|
|
saa_andorb(SAA7134_GPIO_GPMODE3,SAA7134_GPIO_GPRESCAN,SAA7134_GPIO_GPRESCAN);
|
|
mode = saa_readl(SAA7134_GPIO_GPMODE0 >> 2) & 0xfffffff;
|
|
status = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2) & 0xfffffff;
|
|
printk(KERN_DEBUG
|
|
"%s: gpio: mode=0x%07lx in=0x%07lx out=0x%07lx [%s]\n",
|
|
dev->name, mode, (~mode) & status, mode & status, msg);
|
|
}
|
|
|
|
void saa7134_set_gpio(struct saa7134_dev *dev, int bit_no, int value)
|
|
{
|
|
u32 index, bitval;
|
|
|
|
index = 1 << bit_no;
|
|
switch (value) {
|
|
case 0: /* static value */
|
|
case 1: dprintk("setting GPIO%d to static %d\n", bit_no, value);
|
|
/* turn sync mode off if necessary */
|
|
if (index & 0x00c00000)
|
|
saa_andorb(SAA7134_VIDEO_PORT_CTRL6, 0x0f, 0x00);
|
|
if (value)
|
|
bitval = index;
|
|
else
|
|
bitval = 0;
|
|
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, index, index);
|
|
saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, index, bitval);
|
|
break;
|
|
case 3: /* tristate */
|
|
dprintk("setting GPIO%d to tristate\n", bit_no);
|
|
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, index, 0);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
|
|
|
|
/* ----------------------------------------------------------- */
|
|
/* delayed request_module */
|
|
|
|
#if defined(CONFIG_MODULES) && defined(MODULE)
|
|
|
|
static void request_module_async(struct work_struct *work){
|
|
struct saa7134_dev* dev = container_of(work, struct saa7134_dev, request_module_wk);
|
|
if (card_is_empress(dev))
|
|
request_module("saa7134-empress");
|
|
if (card_is_dvb(dev))
|
|
request_module("saa7134-dvb");
|
|
if (alsa) {
|
|
if (dev->pci->device != PCI_DEVICE_ID_PHILIPS_SAA7130)
|
|
request_module("saa7134-alsa");
|
|
}
|
|
}
|
|
|
|
static void request_submodules(struct saa7134_dev *dev)
|
|
{
|
|
INIT_WORK(&dev->request_module_wk, request_module_async);
|
|
schedule_work(&dev->request_module_wk);
|
|
}
|
|
|
|
static void flush_request_submodules(struct saa7134_dev *dev)
|
|
{
|
|
flush_work_sync(&dev->request_module_wk);
|
|
}
|
|
|
|
#else
|
|
#define request_submodules(dev)
|
|
#define flush_request_submodules(dev)
|
|
#endif /* CONFIG_MODULES */
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
|
|
/* nr of (saa7134-)pages for the given buffer size */
|
|
static int saa7134_buffer_pages(int size)
|
|
{
|
|
size = PAGE_ALIGN(size);
|
|
size += PAGE_SIZE; /* for non-page-aligned buffers */
|
|
size /= 4096;
|
|
return size;
|
|
}
|
|
|
|
/* calc max # of buffers from size (must not exceed the 4MB virtual
|
|
* address space per DMA channel) */
|
|
int saa7134_buffer_count(unsigned int size, unsigned int count)
|
|
{
|
|
unsigned int maxcount;
|
|
|
|
maxcount = 1024 / saa7134_buffer_pages(size);
|
|
if (count > maxcount)
|
|
count = maxcount;
|
|
return count;
|
|
}
|
|
|
|
int saa7134_buffer_startpage(struct saa7134_buf *buf)
|
|
{
|
|
return saa7134_buffer_pages(buf->vb.bsize) * buf->vb.i;
|
|
}
|
|
|
|
unsigned long saa7134_buffer_base(struct saa7134_buf *buf)
|
|
{
|
|
unsigned long base;
|
|
struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
|
|
|
|
base = saa7134_buffer_startpage(buf) * 4096;
|
|
base += dma->sglist[0].offset;
|
|
return base;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
|
|
int saa7134_pgtable_alloc(struct pci_dev *pci, struct saa7134_pgtable *pt)
|
|
{
|
|
__le32 *cpu;
|
|
dma_addr_t dma_addr = 0;
|
|
|
|
cpu = pci_alloc_consistent(pci, SAA7134_PGTABLE_SIZE, &dma_addr);
|
|
if (NULL == cpu)
|
|
return -ENOMEM;
|
|
pt->size = SAA7134_PGTABLE_SIZE;
|
|
pt->cpu = cpu;
|
|
pt->dma = dma_addr;
|
|
return 0;
|
|
}
|
|
|
|
int saa7134_pgtable_build(struct pci_dev *pci, struct saa7134_pgtable *pt,
|
|
struct scatterlist *list, unsigned int length,
|
|
unsigned int startpage)
|
|
{
|
|
__le32 *ptr;
|
|
unsigned int i,p;
|
|
|
|
BUG_ON(NULL == pt || NULL == pt->cpu);
|
|
|
|
ptr = pt->cpu + startpage;
|
|
for (i = 0; i < length; i++, list++)
|
|
for (p = 0; p * 4096 < list->length; p++, ptr++)
|
|
*ptr = cpu_to_le32(sg_dma_address(list) - list->offset);
|
|
return 0;
|
|
}
|
|
|
|
void saa7134_pgtable_free(struct pci_dev *pci, struct saa7134_pgtable *pt)
|
|
{
|
|
if (NULL == pt->cpu)
|
|
return;
|
|
pci_free_consistent(pci, pt->size, pt->cpu, pt->dma);
|
|
pt->cpu = NULL;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
|
|
void saa7134_dma_free(struct videobuf_queue *q,struct saa7134_buf *buf)
|
|
{
|
|
struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
|
|
BUG_ON(in_interrupt());
|
|
|
|
videobuf_waiton(q, &buf->vb, 0, 0);
|
|
videobuf_dma_unmap(q->dev, dma);
|
|
videobuf_dma_free(dma);
|
|
buf->vb.state = VIDEOBUF_NEEDS_INIT;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
|
|
int saa7134_buffer_queue(struct saa7134_dev *dev,
|
|
struct saa7134_dmaqueue *q,
|
|
struct saa7134_buf *buf)
|
|
{
|
|
struct saa7134_buf *next = NULL;
|
|
|
|
assert_spin_locked(&dev->slock);
|
|
dprintk("buffer_queue %p\n",buf);
|
|
if (NULL == q->curr) {
|
|
if (!q->need_two) {
|
|
q->curr = buf;
|
|
buf->activate(dev,buf,NULL);
|
|
} else if (list_empty(&q->queue)) {
|
|
list_add_tail(&buf->vb.queue,&q->queue);
|
|
buf->vb.state = VIDEOBUF_QUEUED;
|
|
} else {
|
|
next = list_entry(q->queue.next,struct saa7134_buf,
|
|
vb.queue);
|
|
q->curr = buf;
|
|
buf->activate(dev,buf,next);
|
|
}
|
|
} else {
|
|
list_add_tail(&buf->vb.queue,&q->queue);
|
|
buf->vb.state = VIDEOBUF_QUEUED;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
void saa7134_buffer_finish(struct saa7134_dev *dev,
|
|
struct saa7134_dmaqueue *q,
|
|
unsigned int state)
|
|
{
|
|
assert_spin_locked(&dev->slock);
|
|
dprintk("buffer_finish %p\n",q->curr);
|
|
|
|
/* finish current buffer */
|
|
q->curr->vb.state = state;
|
|
do_gettimeofday(&q->curr->vb.ts);
|
|
wake_up(&q->curr->vb.done);
|
|
q->curr = NULL;
|
|
}
|
|
|
|
void saa7134_buffer_next(struct saa7134_dev *dev,
|
|
struct saa7134_dmaqueue *q)
|
|
{
|
|
struct saa7134_buf *buf,*next = NULL;
|
|
|
|
assert_spin_locked(&dev->slock);
|
|
BUG_ON(NULL != q->curr);
|
|
|
|
if (!list_empty(&q->queue)) {
|
|
/* activate next one from queue */
|
|
buf = list_entry(q->queue.next,struct saa7134_buf,vb.queue);
|
|
dprintk("buffer_next %p [prev=%p/next=%p]\n",
|
|
buf,q->queue.prev,q->queue.next);
|
|
list_del(&buf->vb.queue);
|
|
if (!list_empty(&q->queue))
|
|
next = list_entry(q->queue.next,struct saa7134_buf,
|
|
vb.queue);
|
|
q->curr = buf;
|
|
buf->activate(dev,buf,next);
|
|
dprintk("buffer_next #2 prev=%p/next=%p\n",
|
|
q->queue.prev,q->queue.next);
|
|
} else {
|
|
/* nothing to do -- just stop DMA */
|
|
dprintk("buffer_next %p\n",NULL);
|
|
saa7134_set_dmabits(dev);
|
|
del_timer(&q->timeout);
|
|
|
|
if (card_has_mpeg(dev))
|
|
if (dev->ts_started)
|
|
saa7134_ts_stop(dev);
|
|
}
|
|
}
|
|
|
|
void saa7134_buffer_timeout(unsigned long data)
|
|
{
|
|
struct saa7134_dmaqueue *q = (struct saa7134_dmaqueue*)data;
|
|
struct saa7134_dev *dev = q->dev;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&dev->slock,flags);
|
|
|
|
/* try to reset the hardware (SWRST) */
|
|
saa_writeb(SAA7134_REGION_ENABLE, 0x00);
|
|
saa_writeb(SAA7134_REGION_ENABLE, 0x80);
|
|
saa_writeb(SAA7134_REGION_ENABLE, 0x00);
|
|
|
|
/* flag current buffer as failed,
|
|
try to start over with the next one. */
|
|
if (q->curr) {
|
|
dprintk("timeout on %p\n",q->curr);
|
|
saa7134_buffer_finish(dev,q,VIDEOBUF_ERROR);
|
|
}
|
|
saa7134_buffer_next(dev,q);
|
|
spin_unlock_irqrestore(&dev->slock,flags);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
|
|
int saa7134_set_dmabits(struct saa7134_dev *dev)
|
|
{
|
|
u32 split, task=0, ctrl=0, irq=0;
|
|
enum v4l2_field cap = V4L2_FIELD_ANY;
|
|
enum v4l2_field ov = V4L2_FIELD_ANY;
|
|
|
|
assert_spin_locked(&dev->slock);
|
|
|
|
if (dev->insuspend)
|
|
return 0;
|
|
|
|
/* video capture -- dma 0 + video task A */
|
|
if (dev->video_q.curr) {
|
|
task |= 0x01;
|
|
ctrl |= SAA7134_MAIN_CTRL_TE0;
|
|
irq |= SAA7134_IRQ1_INTE_RA0_1 |
|
|
SAA7134_IRQ1_INTE_RA0_0;
|
|
cap = dev->video_q.curr->vb.field;
|
|
}
|
|
|
|
/* video capture -- dma 1+2 (planar modes) */
|
|
if (dev->video_q.curr &&
|
|
dev->video_q.curr->fmt->planar) {
|
|
ctrl |= SAA7134_MAIN_CTRL_TE4 |
|
|
SAA7134_MAIN_CTRL_TE5;
|
|
}
|
|
|
|
/* screen overlay -- dma 0 + video task B */
|
|
if (dev->ovenable) {
|
|
task |= 0x10;
|
|
ctrl |= SAA7134_MAIN_CTRL_TE1;
|
|
ov = dev->ovfield;
|
|
}
|
|
|
|
/* vbi capture -- dma 0 + vbi task A+B */
|
|
if (dev->vbi_q.curr) {
|
|
task |= 0x22;
|
|
ctrl |= SAA7134_MAIN_CTRL_TE2 |
|
|
SAA7134_MAIN_CTRL_TE3;
|
|
irq |= SAA7134_IRQ1_INTE_RA0_7 |
|
|
SAA7134_IRQ1_INTE_RA0_6 |
|
|
SAA7134_IRQ1_INTE_RA0_5 |
|
|
SAA7134_IRQ1_INTE_RA0_4;
|
|
}
|
|
|
|
/* audio capture -- dma 3 */
|
|
if (dev->dmasound.dma_running) {
|
|
ctrl |= SAA7134_MAIN_CTRL_TE6;
|
|
irq |= SAA7134_IRQ1_INTE_RA3_1 |
|
|
SAA7134_IRQ1_INTE_RA3_0;
|
|
}
|
|
|
|
/* TS capture -- dma 5 */
|
|
if (dev->ts_q.curr) {
|
|
ctrl |= SAA7134_MAIN_CTRL_TE5;
|
|
irq |= SAA7134_IRQ1_INTE_RA2_1 |
|
|
SAA7134_IRQ1_INTE_RA2_0;
|
|
}
|
|
|
|
/* set task conditions + field handling */
|
|
if (V4L2_FIELD_HAS_BOTH(cap) || V4L2_FIELD_HAS_BOTH(ov) || cap == ov) {
|
|
/* default config -- use full frames */
|
|
saa_writeb(SAA7134_TASK_CONDITIONS(TASK_A), 0x0d);
|
|
saa_writeb(SAA7134_TASK_CONDITIONS(TASK_B), 0x0d);
|
|
saa_writeb(SAA7134_FIELD_HANDLING(TASK_A), 0x02);
|
|
saa_writeb(SAA7134_FIELD_HANDLING(TASK_B), 0x02);
|
|
split = 0;
|
|
} else {
|
|
/* split fields between tasks */
|
|
if (V4L2_FIELD_TOP == cap) {
|
|
/* odd A, even B, repeat */
|
|
saa_writeb(SAA7134_TASK_CONDITIONS(TASK_A), 0x0d);
|
|
saa_writeb(SAA7134_TASK_CONDITIONS(TASK_B), 0x0e);
|
|
} else {
|
|
/* odd B, even A, repeat */
|
|
saa_writeb(SAA7134_TASK_CONDITIONS(TASK_A), 0x0e);
|
|
saa_writeb(SAA7134_TASK_CONDITIONS(TASK_B), 0x0d);
|
|
}
|
|
saa_writeb(SAA7134_FIELD_HANDLING(TASK_A), 0x01);
|
|
saa_writeb(SAA7134_FIELD_HANDLING(TASK_B), 0x01);
|
|
split = 1;
|
|
}
|
|
|
|
/* irqs */
|
|
saa_writeb(SAA7134_REGION_ENABLE, task);
|
|
saa_writel(SAA7134_IRQ1, irq);
|
|
saa_andorl(SAA7134_MAIN_CTRL,
|
|
SAA7134_MAIN_CTRL_TE0 |
|
|
SAA7134_MAIN_CTRL_TE1 |
|
|
SAA7134_MAIN_CTRL_TE2 |
|
|
SAA7134_MAIN_CTRL_TE3 |
|
|
SAA7134_MAIN_CTRL_TE4 |
|
|
SAA7134_MAIN_CTRL_TE5 |
|
|
SAA7134_MAIN_CTRL_TE6,
|
|
ctrl);
|
|
dprintk("dmabits: task=0x%02x ctrl=0x%02x irq=0x%x split=%s\n",
|
|
task, ctrl, irq, split ? "no" : "yes");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
/* IRQ handler + helpers */
|
|
|
|
static char *irqbits[] = {
|
|
"DONE_RA0", "DONE_RA1", "DONE_RA2", "DONE_RA3",
|
|
"AR", "PE", "PWR_ON", "RDCAP", "INTL", "FIDT", "MMC",
|
|
"TRIG_ERR", "CONF_ERR", "LOAD_ERR",
|
|
"GPIO16", "GPIO18", "GPIO22", "GPIO23"
|
|
};
|
|
#define IRQBITS ARRAY_SIZE(irqbits)
|
|
|
|
static void print_irqstatus(struct saa7134_dev *dev, int loop,
|
|
unsigned long report, unsigned long status)
|
|
{
|
|
unsigned int i;
|
|
|
|
printk(KERN_DEBUG "%s/irq[%d,%ld]: r=0x%lx s=0x%02lx",
|
|
dev->name,loop,jiffies,report,status);
|
|
for (i = 0; i < IRQBITS; i++) {
|
|
if (!(report & (1 << i)))
|
|
continue;
|
|
printk(" %s",irqbits[i]);
|
|
}
|
|
if (report & SAA7134_IRQ_REPORT_DONE_RA0) {
|
|
printk(" | RA0=%s,%s,%s,%ld",
|
|
(status & 0x40) ? "vbi" : "video",
|
|
(status & 0x20) ? "b" : "a",
|
|
(status & 0x10) ? "odd" : "even",
|
|
(status & 0x0f));
|
|
}
|
|
printk("\n");
|
|
}
|
|
|
|
static irqreturn_t saa7134_irq(int irq, void *dev_id)
|
|
{
|
|
struct saa7134_dev *dev = (struct saa7134_dev*) dev_id;
|
|
unsigned long report,status;
|
|
int loop, handled = 0;
|
|
|
|
if (dev->insuspend)
|
|
goto out;
|
|
|
|
for (loop = 0; loop < 10; loop++) {
|
|
report = saa_readl(SAA7134_IRQ_REPORT);
|
|
status = saa_readl(SAA7134_IRQ_STATUS);
|
|
|
|
/* If dmasound support is active and we get a sound report,
|
|
* mask out the report and let the saa7134-alsa module deal
|
|
* with it */
|
|
if ((report & SAA7134_IRQ_REPORT_DONE_RA3) &&
|
|
(dev->dmasound.priv_data != NULL) )
|
|
{
|
|
if (irq_debug > 1)
|
|
printk(KERN_DEBUG "%s/irq: preserving DMA sound interrupt\n",
|
|
dev->name);
|
|
report &= ~SAA7134_IRQ_REPORT_DONE_RA3;
|
|
}
|
|
|
|
if (0 == report) {
|
|
if (irq_debug > 1)
|
|
printk(KERN_DEBUG "%s/irq: no (more) work\n",
|
|
dev->name);
|
|
goto out;
|
|
}
|
|
|
|
handled = 1;
|
|
saa_writel(SAA7134_IRQ_REPORT,report);
|
|
if (irq_debug)
|
|
print_irqstatus(dev,loop,report,status);
|
|
|
|
|
|
if ((report & SAA7134_IRQ_REPORT_RDCAP) ||
|
|
(report & SAA7134_IRQ_REPORT_INTL))
|
|
saa7134_irq_video_signalchange(dev);
|
|
|
|
|
|
if ((report & SAA7134_IRQ_REPORT_DONE_RA0) &&
|
|
(status & 0x60) == 0)
|
|
saa7134_irq_video_done(dev,status);
|
|
|
|
if ((report & SAA7134_IRQ_REPORT_DONE_RA0) &&
|
|
(status & 0x40) == 0x40)
|
|
saa7134_irq_vbi_done(dev,status);
|
|
|
|
if ((report & SAA7134_IRQ_REPORT_DONE_RA2) &&
|
|
card_has_mpeg(dev))
|
|
saa7134_irq_ts_done(dev,status);
|
|
|
|
if (report & SAA7134_IRQ_REPORT_GPIO16) {
|
|
switch (dev->has_remote) {
|
|
case SAA7134_REMOTE_GPIO:
|
|
if (!dev->remote)
|
|
break;
|
|
if (dev->remote->mask_keydown & 0x10000) {
|
|
saa7134_input_irq(dev);
|
|
}
|
|
break;
|
|
|
|
case SAA7134_REMOTE_I2C:
|
|
break; /* FIXME: invoke I2C get_key() */
|
|
|
|
default: /* GPIO16 not used by IR remote */
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (report & SAA7134_IRQ_REPORT_GPIO18) {
|
|
switch (dev->has_remote) {
|
|
case SAA7134_REMOTE_GPIO:
|
|
if (!dev->remote)
|
|
break;
|
|
if ((dev->remote->mask_keydown & 0x40000) ||
|
|
(dev->remote->mask_keyup & 0x40000)) {
|
|
saa7134_input_irq(dev);
|
|
}
|
|
break;
|
|
|
|
case SAA7134_REMOTE_I2C:
|
|
break; /* FIXME: invoke I2C get_key() */
|
|
|
|
default: /* GPIO18 not used by IR remote */
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (10 == loop) {
|
|
print_irqstatus(dev,loop,report,status);
|
|
if (report & SAA7134_IRQ_REPORT_PE) {
|
|
/* disable all parity error */
|
|
printk(KERN_WARNING "%s/irq: looping -- "
|
|
"clearing PE (parity error!) enable bit\n",dev->name);
|
|
saa_clearl(SAA7134_IRQ2,SAA7134_IRQ2_INTE_PE);
|
|
} else if (report & SAA7134_IRQ_REPORT_GPIO16) {
|
|
/* disable gpio16 IRQ */
|
|
printk(KERN_WARNING "%s/irq: looping -- "
|
|
"clearing GPIO16 enable bit\n",dev->name);
|
|
saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO16_P);
|
|
saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO16_N);
|
|
} else if (report & SAA7134_IRQ_REPORT_GPIO18) {
|
|
/* disable gpio18 IRQs */
|
|
printk(KERN_WARNING "%s/irq: looping -- "
|
|
"clearing GPIO18 enable bit\n",dev->name);
|
|
saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18_P);
|
|
saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18_N);
|
|
} else {
|
|
/* disable all irqs */
|
|
printk(KERN_WARNING "%s/irq: looping -- "
|
|
"clearing all enable bits\n",dev->name);
|
|
saa_writel(SAA7134_IRQ1,0);
|
|
saa_writel(SAA7134_IRQ2,0);
|
|
}
|
|
}
|
|
|
|
out:
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
|
|
/* early init (no i2c, no irq) */
|
|
|
|
static int saa7134_hw_enable1(struct saa7134_dev *dev)
|
|
{
|
|
/* RAM FIFO config */
|
|
saa_writel(SAA7134_FIFO_SIZE, 0x08070503);
|
|
saa_writel(SAA7134_THRESHOULD, 0x02020202);
|
|
|
|
/* enable audio + video processing */
|
|
saa_writel(SAA7134_MAIN_CTRL,
|
|
SAA7134_MAIN_CTRL_VPLLE |
|
|
SAA7134_MAIN_CTRL_APLLE |
|
|
SAA7134_MAIN_CTRL_EXOSC |
|
|
SAA7134_MAIN_CTRL_EVFE1 |
|
|
SAA7134_MAIN_CTRL_EVFE2 |
|
|
SAA7134_MAIN_CTRL_ESFE |
|
|
SAA7134_MAIN_CTRL_EBDAC);
|
|
|
|
/*
|
|
* Initialize OSS _after_ enabling audio clock PLL and audio processing.
|
|
* OSS initialization writes to registers via the audio DSP; these
|
|
* writes will fail unless the audio clock has been started. At worst,
|
|
* audio will not work.
|
|
*/
|
|
|
|
/* enable peripheral devices */
|
|
saa_writeb(SAA7134_SPECIAL_MODE, 0x01);
|
|
|
|
/* set vertical line numbering start (vbi needs this) */
|
|
saa_writeb(SAA7134_SOURCE_TIMING2, 0x20);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int saa7134_hwinit1(struct saa7134_dev *dev)
|
|
{
|
|
dprintk("hwinit1\n");
|
|
|
|
saa_writel(SAA7134_IRQ1, 0);
|
|
saa_writel(SAA7134_IRQ2, 0);
|
|
|
|
/* Clear any stale IRQ reports */
|
|
saa_writel(SAA7134_IRQ_REPORT, saa_readl(SAA7134_IRQ_REPORT));
|
|
|
|
mutex_init(&dev->lock);
|
|
spin_lock_init(&dev->slock);
|
|
|
|
saa7134_track_gpio(dev,"pre-init");
|
|
saa7134_video_init1(dev);
|
|
saa7134_vbi_init1(dev);
|
|
if (card_has_mpeg(dev))
|
|
saa7134_ts_init1(dev);
|
|
saa7134_input_init1(dev);
|
|
|
|
saa7134_hw_enable1(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* late init (with i2c + irq) */
|
|
static int saa7134_hw_enable2(struct saa7134_dev *dev)
|
|
{
|
|
|
|
unsigned int irq2_mask;
|
|
|
|
/* enable IRQ's */
|
|
irq2_mask =
|
|
SAA7134_IRQ2_INTE_DEC3 |
|
|
SAA7134_IRQ2_INTE_DEC2 |
|
|
SAA7134_IRQ2_INTE_DEC1 |
|
|
SAA7134_IRQ2_INTE_DEC0 |
|
|
SAA7134_IRQ2_INTE_PE |
|
|
SAA7134_IRQ2_INTE_AR;
|
|
|
|
if (dev->has_remote == SAA7134_REMOTE_GPIO && dev->remote) {
|
|
if (dev->remote->mask_keydown & 0x10000)
|
|
irq2_mask |= SAA7134_IRQ2_INTE_GPIO16_N;
|
|
else { /* Allow enabling both IRQ edge triggers */
|
|
if (dev->remote->mask_keydown & 0x40000)
|
|
irq2_mask |= SAA7134_IRQ2_INTE_GPIO18_P;
|
|
if (dev->remote->mask_keyup & 0x40000)
|
|
irq2_mask |= SAA7134_IRQ2_INTE_GPIO18_N;
|
|
}
|
|
}
|
|
|
|
if (dev->has_remote == SAA7134_REMOTE_I2C) {
|
|
request_module("ir-kbd-i2c");
|
|
}
|
|
|
|
saa_writel(SAA7134_IRQ1, 0);
|
|
saa_writel(SAA7134_IRQ2, irq2_mask);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int saa7134_hwinit2(struct saa7134_dev *dev)
|
|
{
|
|
|
|
dprintk("hwinit2\n");
|
|
|
|
saa7134_video_init2(dev);
|
|
saa7134_tvaudio_init2(dev);
|
|
|
|
saa7134_hw_enable2(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* shutdown */
|
|
static int saa7134_hwfini(struct saa7134_dev *dev)
|
|
{
|
|
dprintk("hwfini\n");
|
|
|
|
if (card_has_mpeg(dev))
|
|
saa7134_ts_fini(dev);
|
|
saa7134_input_fini(dev);
|
|
saa7134_vbi_fini(dev);
|
|
saa7134_tvaudio_fini(dev);
|
|
return 0;
|
|
}
|
|
|
|
static void __devinit must_configure_manually(int has_eeprom)
|
|
{
|
|
unsigned int i,p;
|
|
|
|
if (!has_eeprom)
|
|
printk(KERN_WARNING
|
|
"saa7134: <rant>\n"
|
|
"saa7134: Congratulations! Your TV card vendor saved a few\n"
|
|
"saa7134: cents for a eeprom, thus your pci board has no\n"
|
|
"saa7134: subsystem ID and I can't identify it automatically\n"
|
|
"saa7134: </rant>\n"
|
|
"saa7134: I feel better now. Ok, here are the good news:\n"
|
|
"saa7134: You can use the card=<nr> insmod option to specify\n"
|
|
"saa7134: which board do you have. The list:\n");
|
|
else
|
|
printk(KERN_WARNING
|
|
"saa7134: Board is currently unknown. You might try to use the card=<nr>\n"
|
|
"saa7134: insmod option to specify which board do you have, but this is\n"
|
|
"saa7134: somewhat risky, as might damage your card. It is better to ask\n"
|
|
"saa7134: for support at linux-media@vger.kernel.org.\n"
|
|
"saa7134: The supported cards are:\n");
|
|
|
|
for (i = 0; i < saa7134_bcount; i++) {
|
|
printk(KERN_WARNING "saa7134: card=%d -> %-40.40s",
|
|
i,saa7134_boards[i].name);
|
|
for (p = 0; saa7134_pci_tbl[p].driver_data; p++) {
|
|
if (saa7134_pci_tbl[p].driver_data != i)
|
|
continue;
|
|
printk(" %04x:%04x",
|
|
saa7134_pci_tbl[p].subvendor,
|
|
saa7134_pci_tbl[p].subdevice);
|
|
}
|
|
printk("\n");
|
|
}
|
|
}
|
|
|
|
static struct video_device *vdev_init(struct saa7134_dev *dev,
|
|
struct video_device *template,
|
|
char *type)
|
|
{
|
|
struct video_device *vfd;
|
|
|
|
vfd = video_device_alloc();
|
|
if (NULL == vfd)
|
|
return NULL;
|
|
*vfd = *template;
|
|
vfd->v4l2_dev = &dev->v4l2_dev;
|
|
vfd->release = video_device_release;
|
|
vfd->debug = video_debug;
|
|
snprintf(vfd->name, sizeof(vfd->name), "%s %s (%s)",
|
|
dev->name, type, saa7134_boards[dev->board].name);
|
|
video_set_drvdata(vfd, dev);
|
|
return vfd;
|
|
}
|
|
|
|
static void saa7134_unregister_video(struct saa7134_dev *dev)
|
|
{
|
|
if (dev->video_dev) {
|
|
if (video_is_registered(dev->video_dev))
|
|
video_unregister_device(dev->video_dev);
|
|
else
|
|
video_device_release(dev->video_dev);
|
|
dev->video_dev = NULL;
|
|
}
|
|
if (dev->vbi_dev) {
|
|
if (video_is_registered(dev->vbi_dev))
|
|
video_unregister_device(dev->vbi_dev);
|
|
else
|
|
video_device_release(dev->vbi_dev);
|
|
dev->vbi_dev = NULL;
|
|
}
|
|
if (dev->radio_dev) {
|
|
if (video_is_registered(dev->radio_dev))
|
|
video_unregister_device(dev->radio_dev);
|
|
else
|
|
video_device_release(dev->radio_dev);
|
|
dev->radio_dev = NULL;
|
|
}
|
|
}
|
|
|
|
static void mpeg_ops_attach(struct saa7134_mpeg_ops *ops,
|
|
struct saa7134_dev *dev)
|
|
{
|
|
int err;
|
|
|
|
if (NULL != dev->mops)
|
|
return;
|
|
if (saa7134_boards[dev->board].mpeg != ops->type)
|
|
return;
|
|
err = ops->init(dev);
|
|
if (0 != err)
|
|
return;
|
|
dev->mops = ops;
|
|
}
|
|
|
|
static void mpeg_ops_detach(struct saa7134_mpeg_ops *ops,
|
|
struct saa7134_dev *dev)
|
|
{
|
|
if (NULL == dev->mops)
|
|
return;
|
|
if (dev->mops != ops)
|
|
return;
|
|
dev->mops->fini(dev);
|
|
dev->mops = NULL;
|
|
}
|
|
|
|
static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
|
|
const struct pci_device_id *pci_id)
|
|
{
|
|
struct saa7134_dev *dev;
|
|
struct saa7134_mpeg_ops *mops;
|
|
int err;
|
|
|
|
if (saa7134_devcount == SAA7134_MAXBOARDS)
|
|
return -ENOMEM;
|
|
|
|
dev = kzalloc(sizeof(*dev),GFP_KERNEL);
|
|
if (NULL == dev)
|
|
return -ENOMEM;
|
|
|
|
err = v4l2_device_register(&pci_dev->dev, &dev->v4l2_dev);
|
|
if (err)
|
|
goto fail0;
|
|
|
|
/* pci init */
|
|
dev->pci = pci_dev;
|
|
if (pci_enable_device(pci_dev)) {
|
|
err = -EIO;
|
|
goto fail1;
|
|
}
|
|
|
|
dev->nr = saa7134_devcount;
|
|
sprintf(dev->name,"saa%x[%d]",pci_dev->device,dev->nr);
|
|
|
|
/* pci quirks */
|
|
if (pci_pci_problems) {
|
|
if (pci_pci_problems & PCIPCI_TRITON)
|
|
printk(KERN_INFO "%s: quirk: PCIPCI_TRITON\n", dev->name);
|
|
if (pci_pci_problems & PCIPCI_NATOMA)
|
|
printk(KERN_INFO "%s: quirk: PCIPCI_NATOMA\n", dev->name);
|
|
if (pci_pci_problems & PCIPCI_VIAETBF)
|
|
printk(KERN_INFO "%s: quirk: PCIPCI_VIAETBF\n", dev->name);
|
|
if (pci_pci_problems & PCIPCI_VSFX)
|
|
printk(KERN_INFO "%s: quirk: PCIPCI_VSFX\n",dev->name);
|
|
#ifdef PCIPCI_ALIMAGIK
|
|
if (pci_pci_problems & PCIPCI_ALIMAGIK) {
|
|
printk(KERN_INFO "%s: quirk: PCIPCI_ALIMAGIK -- latency fixup\n",
|
|
dev->name);
|
|
latency = 0x0A;
|
|
}
|
|
#endif
|
|
if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) {
|
|
printk(KERN_INFO "%s: quirk: this driver and your "
|
|
"chipset may not work together"
|
|
" in overlay mode.\n",dev->name);
|
|
if (!saa7134_no_overlay) {
|
|
printk(KERN_INFO "%s: quirk: overlay "
|
|
"mode will be disabled.\n",
|
|
dev->name);
|
|
saa7134_no_overlay = 1;
|
|
} else {
|
|
printk(KERN_INFO "%s: quirk: overlay "
|
|
"mode will be forced. Use this"
|
|
" option at your own risk.\n",
|
|
dev->name);
|
|
}
|
|
}
|
|
}
|
|
if (UNSET != latency) {
|
|
printk(KERN_INFO "%s: setting pci latency timer to %d\n",
|
|
dev->name,latency);
|
|
pci_write_config_byte(pci_dev, PCI_LATENCY_TIMER, latency);
|
|
}
|
|
|
|
/* print pci info */
|
|
dev->pci_rev = pci_dev->revision;
|
|
pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &dev->pci_lat);
|
|
printk(KERN_INFO "%s: found at %s, rev: %d, irq: %d, "
|
|
"latency: %d, mmio: 0x%llx\n", dev->name,
|
|
pci_name(pci_dev), dev->pci_rev, pci_dev->irq,
|
|
dev->pci_lat,(unsigned long long)pci_resource_start(pci_dev,0));
|
|
pci_set_master(pci_dev);
|
|
if (!pci_dma_supported(pci_dev, DMA_BIT_MASK(32))) {
|
|
printk("%s: Oops: no 32bit PCI DMA ???\n",dev->name);
|
|
err = -EIO;
|
|
goto fail1;
|
|
}
|
|
|
|
/* board config */
|
|
dev->board = pci_id->driver_data;
|
|
if (card[dev->nr] >= 0 &&
|
|
card[dev->nr] < saa7134_bcount)
|
|
dev->board = card[dev->nr];
|
|
if (SAA7134_BOARD_UNKNOWN == dev->board)
|
|
must_configure_manually(0);
|
|
else if (SAA7134_BOARD_NOAUTO == dev->board) {
|
|
must_configure_manually(1);
|
|
dev->board = SAA7134_BOARD_UNKNOWN;
|
|
}
|
|
dev->autodetected = card[dev->nr] != dev->board;
|
|
dev->tuner_type = saa7134_boards[dev->board].tuner_type;
|
|
dev->tuner_addr = saa7134_boards[dev->board].tuner_addr;
|
|
dev->radio_type = saa7134_boards[dev->board].radio_type;
|
|
dev->radio_addr = saa7134_boards[dev->board].radio_addr;
|
|
dev->tda9887_conf = saa7134_boards[dev->board].tda9887_conf;
|
|
if (UNSET != tuner[dev->nr])
|
|
dev->tuner_type = tuner[dev->nr];
|
|
printk(KERN_INFO "%s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n",
|
|
dev->name,pci_dev->subsystem_vendor,
|
|
pci_dev->subsystem_device,saa7134_boards[dev->board].name,
|
|
dev->board, dev->autodetected ?
|
|
"autodetected" : "insmod option");
|
|
|
|
/* get mmio */
|
|
if (!request_mem_region(pci_resource_start(pci_dev,0),
|
|
pci_resource_len(pci_dev,0),
|
|
dev->name)) {
|
|
err = -EBUSY;
|
|
printk(KERN_ERR "%s: can't get MMIO memory @ 0x%llx\n",
|
|
dev->name,(unsigned long long)pci_resource_start(pci_dev,0));
|
|
goto fail1;
|
|
}
|
|
dev->lmmio = ioremap(pci_resource_start(pci_dev, 0),
|
|
pci_resource_len(pci_dev, 0));
|
|
dev->bmmio = (__u8 __iomem *)dev->lmmio;
|
|
if (NULL == dev->lmmio) {
|
|
err = -EIO;
|
|
printk(KERN_ERR "%s: can't ioremap() MMIO memory\n",
|
|
dev->name);
|
|
goto fail2;
|
|
}
|
|
|
|
/* initialize hardware #1 */
|
|
saa7134_board_init1(dev);
|
|
saa7134_hwinit1(dev);
|
|
|
|
/* get irq */
|
|
err = request_irq(pci_dev->irq, saa7134_irq,
|
|
IRQF_SHARED | IRQF_DISABLED, dev->name, dev);
|
|
if (err < 0) {
|
|
printk(KERN_ERR "%s: can't get IRQ %d\n",
|
|
dev->name,pci_dev->irq);
|
|
goto fail3;
|
|
}
|
|
|
|
/* wait a bit, register i2c bus */
|
|
msleep(100);
|
|
saa7134_i2c_register(dev);
|
|
saa7134_board_init2(dev);
|
|
|
|
saa7134_hwinit2(dev);
|
|
|
|
/* load i2c helpers */
|
|
if (card_is_empress(dev)) {
|
|
struct v4l2_subdev *sd =
|
|
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
|
|
"saa6752hs",
|
|
saa7134_boards[dev->board].empress_addr, NULL);
|
|
|
|
if (sd)
|
|
sd->grp_id = GRP_EMPRESS;
|
|
}
|
|
|
|
if (saa7134_boards[dev->board].rds_addr) {
|
|
struct v4l2_subdev *sd;
|
|
|
|
sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
|
|
&dev->i2c_adap, "saa6588",
|
|
0, I2C_ADDRS(saa7134_boards[dev->board].rds_addr));
|
|
if (sd) {
|
|
printk(KERN_INFO "%s: found RDS decoder\n", dev->name);
|
|
dev->has_rds = 1;
|
|
}
|
|
}
|
|
|
|
v4l2_prio_init(&dev->prio);
|
|
|
|
mutex_lock(&saa7134_devlist_lock);
|
|
list_for_each_entry(mops, &mops_list, next)
|
|
mpeg_ops_attach(mops, dev);
|
|
list_add_tail(&dev->devlist, &saa7134_devlist);
|
|
mutex_unlock(&saa7134_devlist_lock);
|
|
|
|
/* check for signal */
|
|
saa7134_irq_video_signalchange(dev);
|
|
|
|
if (TUNER_ABSENT != dev->tuner_type)
|
|
saa_call_all(dev, core, s_power, 0);
|
|
|
|
/* register v4l devices */
|
|
if (saa7134_no_overlay > 0)
|
|
printk(KERN_INFO "%s: Overlay support disabled.\n", dev->name);
|
|
|
|
dev->video_dev = vdev_init(dev,&saa7134_video_template,"video");
|
|
err = video_register_device(dev->video_dev,VFL_TYPE_GRABBER,
|
|
video_nr[dev->nr]);
|
|
if (err < 0) {
|
|
printk(KERN_INFO "%s: can't register video device\n",
|
|
dev->name);
|
|
goto fail4;
|
|
}
|
|
printk(KERN_INFO "%s: registered device %s [v4l2]\n",
|
|
dev->name, video_device_node_name(dev->video_dev));
|
|
|
|
dev->vbi_dev = vdev_init(dev, &saa7134_video_template, "vbi");
|
|
|
|
err = video_register_device(dev->vbi_dev,VFL_TYPE_VBI,
|
|
vbi_nr[dev->nr]);
|
|
if (err < 0)
|
|
goto fail4;
|
|
printk(KERN_INFO "%s: registered device %s\n",
|
|
dev->name, video_device_node_name(dev->vbi_dev));
|
|
|
|
if (card_has_radio(dev)) {
|
|
dev->radio_dev = vdev_init(dev,&saa7134_radio_template,"radio");
|
|
err = video_register_device(dev->radio_dev,VFL_TYPE_RADIO,
|
|
radio_nr[dev->nr]);
|
|
if (err < 0)
|
|
goto fail4;
|
|
printk(KERN_INFO "%s: registered device %s\n",
|
|
dev->name, video_device_node_name(dev->radio_dev));
|
|
}
|
|
|
|
/* everything worked */
|
|
saa7134_devcount++;
|
|
|
|
if (saa7134_dmasound_init && !dev->dmasound.priv_data)
|
|
saa7134_dmasound_init(dev);
|
|
|
|
request_submodules(dev);
|
|
return 0;
|
|
|
|
fail4:
|
|
saa7134_unregister_video(dev);
|
|
saa7134_i2c_unregister(dev);
|
|
free_irq(pci_dev->irq, dev);
|
|
fail3:
|
|
saa7134_hwfini(dev);
|
|
iounmap(dev->lmmio);
|
|
fail2:
|
|
release_mem_region(pci_resource_start(pci_dev,0),
|
|
pci_resource_len(pci_dev,0));
|
|
fail1:
|
|
v4l2_device_unregister(&dev->v4l2_dev);
|
|
fail0:
|
|
kfree(dev);
|
|
return err;
|
|
}
|
|
|
|
static void __devexit saa7134_finidev(struct pci_dev *pci_dev)
|
|
{
|
|
struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev);
|
|
struct saa7134_dev *dev = container_of(v4l2_dev, struct saa7134_dev, v4l2_dev);
|
|
struct saa7134_mpeg_ops *mops;
|
|
|
|
flush_request_submodules(dev);
|
|
|
|
/* Release DMA sound modules if present */
|
|
if (saa7134_dmasound_exit && dev->dmasound.priv_data) {
|
|
saa7134_dmasound_exit(dev);
|
|
}
|
|
|
|
/* debugging ... */
|
|
if (irq_debug) {
|
|
u32 report = saa_readl(SAA7134_IRQ_REPORT);
|
|
u32 status = saa_readl(SAA7134_IRQ_STATUS);
|
|
print_irqstatus(dev,42,report,status);
|
|
}
|
|
|
|
/* disable peripheral devices */
|
|
saa_writeb(SAA7134_SPECIAL_MODE,0);
|
|
|
|
/* shutdown hardware */
|
|
saa_writel(SAA7134_IRQ1,0);
|
|
saa_writel(SAA7134_IRQ2,0);
|
|
saa_writel(SAA7134_MAIN_CTRL,0);
|
|
|
|
/* shutdown subsystems */
|
|
saa7134_hwfini(dev);
|
|
|
|
/* unregister */
|
|
mutex_lock(&saa7134_devlist_lock);
|
|
list_del(&dev->devlist);
|
|
list_for_each_entry(mops, &mops_list, next)
|
|
mpeg_ops_detach(mops, dev);
|
|
mutex_unlock(&saa7134_devlist_lock);
|
|
saa7134_devcount--;
|
|
|
|
saa7134_i2c_unregister(dev);
|
|
saa7134_unregister_video(dev);
|
|
|
|
|
|
/* the DMA sound modules should be unloaded before reaching
|
|
this, but just in case they are still present... */
|
|
if (dev->dmasound.priv_data != NULL) {
|
|
free_irq(pci_dev->irq, &dev->dmasound);
|
|
dev->dmasound.priv_data = NULL;
|
|
}
|
|
|
|
|
|
/* release resources */
|
|
free_irq(pci_dev->irq, dev);
|
|
iounmap(dev->lmmio);
|
|
release_mem_region(pci_resource_start(pci_dev,0),
|
|
pci_resource_len(pci_dev,0));
|
|
|
|
|
|
v4l2_device_unregister(&dev->v4l2_dev);
|
|
|
|
/* free memory */
|
|
kfree(dev);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
/* resends a current buffer in queue after resume */
|
|
static int saa7134_buffer_requeue(struct saa7134_dev *dev,
|
|
struct saa7134_dmaqueue *q)
|
|
{
|
|
struct saa7134_buf *buf, *next;
|
|
|
|
assert_spin_locked(&dev->slock);
|
|
|
|
buf = q->curr;
|
|
next = buf;
|
|
dprintk("buffer_requeue\n");
|
|
|
|
if (!buf)
|
|
return 0;
|
|
|
|
dprintk("buffer_requeue : resending active buffers \n");
|
|
|
|
if (!list_empty(&q->queue))
|
|
next = list_entry(q->queue.next, struct saa7134_buf,
|
|
vb.queue);
|
|
buf->activate(dev, buf, next);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int saa7134_suspend(struct pci_dev *pci_dev , pm_message_t state)
|
|
{
|
|
struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev);
|
|
struct saa7134_dev *dev = container_of(v4l2_dev, struct saa7134_dev, v4l2_dev);
|
|
|
|
/* disable overlay - apps should enable it explicitly on resume*/
|
|
dev->ovenable = 0;
|
|
|
|
/* Disable interrupts, DMA, and rest of the chip*/
|
|
saa_writel(SAA7134_IRQ1, 0);
|
|
saa_writel(SAA7134_IRQ2, 0);
|
|
saa_writel(SAA7134_MAIN_CTRL, 0);
|
|
|
|
dev->insuspend = 1;
|
|
synchronize_irq(pci_dev->irq);
|
|
|
|
/* ACK interrupts once more, just in case,
|
|
since the IRQ handler won't ack them anymore*/
|
|
|
|
saa_writel(SAA7134_IRQ_REPORT, saa_readl(SAA7134_IRQ_REPORT));
|
|
|
|
/* Disable timeout timers - if we have active buffers, we will
|
|
fill them on resume*/
|
|
|
|
del_timer(&dev->video_q.timeout);
|
|
del_timer(&dev->vbi_q.timeout);
|
|
del_timer(&dev->ts_q.timeout);
|
|
|
|
if (dev->remote)
|
|
saa7134_ir_stop(dev);
|
|
|
|
pci_save_state(pci_dev);
|
|
pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int saa7134_resume(struct pci_dev *pci_dev)
|
|
{
|
|
struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev);
|
|
struct saa7134_dev *dev = container_of(v4l2_dev, struct saa7134_dev, v4l2_dev);
|
|
unsigned long flags;
|
|
|
|
pci_set_power_state(pci_dev, PCI_D0);
|
|
pci_restore_state(pci_dev);
|
|
|
|
/* Do things that are done in saa7134_initdev ,
|
|
except of initializing memory structures.*/
|
|
|
|
saa7134_board_init1(dev);
|
|
|
|
/* saa7134_hwinit1 */
|
|
if (saa7134_boards[dev->board].video_out)
|
|
saa7134_videoport_init(dev);
|
|
if (card_has_mpeg(dev))
|
|
saa7134_ts_init_hw(dev);
|
|
if (dev->remote)
|
|
saa7134_ir_start(dev);
|
|
saa7134_hw_enable1(dev);
|
|
|
|
msleep(100);
|
|
|
|
saa7134_board_init2(dev);
|
|
|
|
/*saa7134_hwinit2*/
|
|
saa7134_set_tvnorm_hw(dev);
|
|
saa7134_tvaudio_setmute(dev);
|
|
saa7134_tvaudio_setvolume(dev, dev->ctl_volume);
|
|
saa7134_tvaudio_init(dev);
|
|
saa7134_enable_i2s(dev);
|
|
saa7134_hw_enable2(dev);
|
|
|
|
saa7134_irq_video_signalchange(dev);
|
|
|
|
/*resume unfinished buffer(s)*/
|
|
spin_lock_irqsave(&dev->slock, flags);
|
|
saa7134_buffer_requeue(dev, &dev->video_q);
|
|
saa7134_buffer_requeue(dev, &dev->vbi_q);
|
|
saa7134_buffer_requeue(dev, &dev->ts_q);
|
|
|
|
/* FIXME: Disable DMA audio sound - temporary till proper support
|
|
is implemented*/
|
|
|
|
dev->dmasound.dma_running = 0;
|
|
|
|
/* start DMA now*/
|
|
dev->insuspend = 0;
|
|
smp_wmb();
|
|
saa7134_set_dmabits(dev);
|
|
spin_unlock_irqrestore(&dev->slock, flags);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/* ----------------------------------------------------------- */
|
|
|
|
int saa7134_ts_register(struct saa7134_mpeg_ops *ops)
|
|
{
|
|
struct saa7134_dev *dev;
|
|
|
|
mutex_lock(&saa7134_devlist_lock);
|
|
list_for_each_entry(dev, &saa7134_devlist, devlist)
|
|
mpeg_ops_attach(ops, dev);
|
|
list_add_tail(&ops->next,&mops_list);
|
|
mutex_unlock(&saa7134_devlist_lock);
|
|
return 0;
|
|
}
|
|
|
|
void saa7134_ts_unregister(struct saa7134_mpeg_ops *ops)
|
|
{
|
|
struct saa7134_dev *dev;
|
|
|
|
mutex_lock(&saa7134_devlist_lock);
|
|
list_del(&ops->next);
|
|
list_for_each_entry(dev, &saa7134_devlist, devlist)
|
|
mpeg_ops_detach(ops, dev);
|
|
mutex_unlock(&saa7134_devlist_lock);
|
|
}
|
|
|
|
EXPORT_SYMBOL(saa7134_ts_register);
|
|
EXPORT_SYMBOL(saa7134_ts_unregister);
|
|
|
|
/* ----------------------------------------------------------- */
|
|
|
|
static struct pci_driver saa7134_pci_driver = {
|
|
.name = "saa7134",
|
|
.id_table = saa7134_pci_tbl,
|
|
.probe = saa7134_initdev,
|
|
.remove = __devexit_p(saa7134_finidev),
|
|
#ifdef CONFIG_PM
|
|
.suspend = saa7134_suspend,
|
|
.resume = saa7134_resume
|
|
#endif
|
|
};
|
|
|
|
static int __init saa7134_init(void)
|
|
{
|
|
INIT_LIST_HEAD(&saa7134_devlist);
|
|
printk(KERN_INFO "saa7130/34: v4l2 driver version %s loaded\n",
|
|
SAA7134_VERSION);
|
|
return pci_register_driver(&saa7134_pci_driver);
|
|
}
|
|
|
|
static void __exit saa7134_fini(void)
|
|
{
|
|
pci_unregister_driver(&saa7134_pci_driver);
|
|
}
|
|
|
|
module_init(saa7134_init);
|
|
module_exit(saa7134_fini);
|
|
|
|
/* ----------------------------------------------------------- */
|
|
|
|
EXPORT_SYMBOL(saa7134_set_gpio);
|
|
EXPORT_SYMBOL(saa7134_boards);
|
|
|
|
/* ----------------- for the DMA sound modules --------------- */
|
|
|
|
EXPORT_SYMBOL(saa7134_dmasound_init);
|
|
EXPORT_SYMBOL(saa7134_dmasound_exit);
|
|
EXPORT_SYMBOL(saa7134_pgtable_free);
|
|
EXPORT_SYMBOL(saa7134_pgtable_build);
|
|
EXPORT_SYMBOL(saa7134_pgtable_alloc);
|
|
EXPORT_SYMBOL(saa7134_set_dmabits);
|
|
|
|
/* ----------------------------------------------------------- */
|
|
/*
|
|
* Local variables:
|
|
* c-basic-offset: 8
|
|
* End:
|
|
*/
|