q3k/linux
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
linux/drivers/mmc/host/cb710-mmc.c
Axel Lin d1f81a64a4 mmc: convert drivers/mmc/host/* to use module_platform_driver() 
This patch converts the drivers in drivers/mmc/host/* to use the
module_platform_driver() macro which makes the code smaller and a bit
simpler.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Acked-by: David Brown <davidb@codeaurora.org>
Acked-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11 23:58:42 -05:00

788 lines
22 KiB
C
Raw Blame History

/*
* cb710/mmc.c
*
* Copyright by Michał Mirosław, 2008-2009
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include "cb710-mmc.h"
static const u8 cb710_clock_divider_log2[8] = {
/* 1, 2, 4, 8, 16, 32, 128, 512 */
0, 1, 2, 3, 4, 5, 7, 9
};
#define CB710_MAX_DIVIDER_IDX \
(ARRAY_SIZE(cb710_clock_divider_log2) - 1)
static const u8 cb710_src_freq_mhz[16] = {
33, 10, 20, 25, 30, 35, 40, 45,
50, 55, 60, 65, 70, 75, 80, 85
};
static void cb710_mmc_select_clock_divider(struct mmc_host *mmc, int hz)
{
struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
struct pci_dev *pdev = cb710_slot_to_chip(slot)->pdev;
u32 src_freq_idx;
u32 divider_idx;
int src_hz;
/* on CB710 in HP nx9500:
* src_freq_idx == 0
* indexes 1-7 work as written in the table
* indexes 0,8-15 give no clock output
*/
pci_read_config_dword(pdev, 0x48, &src_freq_idx);
src_freq_idx = (src_freq_idx >> 16) & 0xF;
src_hz = cb710_src_freq_mhz[src_freq_idx] * 1000000;
for (divider_idx = 0; divider_idx < CB710_MAX_DIVIDER_IDX; ++divider_idx) {
if (hz >= src_hz >> cb710_clock_divider_log2[divider_idx])
break;
}
if (src_freq_idx)
divider_idx |= 0x8;
else if (divider_idx == 0)
divider_idx = 1;
cb710_pci_update_config_reg(pdev, 0x40, ~0xF0000000, divider_idx << 28);
dev_dbg(cb710_slot_dev(slot),
"clock set to %d Hz, wanted %d Hz; src_freq_idx = %d, divider_idx = %d|%d\n",
src_hz >> cb710_clock_divider_log2[divider_idx & 7],
hz, src_freq_idx, divider_idx & 7, divider_idx & 8);
}
static void __cb710_mmc_enable_irq(struct cb710_slot *slot,
unsigned short enable, unsigned short mask)
{
/* clear global IE
* - it gets set later if any interrupt sources are enabled */
mask |= CB710_MMC_IE_IRQ_ENABLE;
/* look like interrupt is fired whenever
* WORD[0x0C] & WORD[0x10] != 0;
* -> bit 15 port 0x0C seems to be global interrupt enable
*/
enable = (cb710_read_port_16(slot, CB710_MMC_IRQ_ENABLE_PORT)
& ~mask) | enable;
if (enable)
enable |= CB710_MMC_IE_IRQ_ENABLE;
cb710_write_port_16(slot, CB710_MMC_IRQ_ENABLE_PORT, enable);
}
static void cb710_mmc_enable_irq(struct cb710_slot *slot,
unsigned short enable, unsigned short mask)
{
struct cb710_mmc_reader *reader = mmc_priv(cb710_slot_to_mmc(slot));
unsigned long flags;
spin_lock_irqsave(&reader->irq_lock, flags);
/* this is the only thing irq_lock protects */
__cb710_mmc_enable_irq(slot, enable, mask);
spin_unlock_irqrestore(&reader->irq_lock, flags);
}
static void cb710_mmc_reset_events(struct cb710_slot *slot)
{
cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, 0xFF);
cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, 0xFF);
cb710_write_port_8(slot, CB710_MMC_STATUS2_PORT, 0xFF);
}
static void cb710_mmc_enable_4bit_data(struct cb710_slot *slot, int enable)
{
if (enable)
cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT,
CB710_MMC_C1_4BIT_DATA_BUS, 0);
else
cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT,
0, CB710_MMC_C1_4BIT_DATA_BUS);
}
static int cb710_check_event(struct cb710_slot *slot, u8 what)
{
u16 status;
status = cb710_read_port_16(slot, CB710_MMC_STATUS_PORT);
if (status & CB710_MMC_S0_FIFO_UNDERFLOW) {
/* it is just a guess, so log it */
dev_dbg(cb710_slot_dev(slot),
"CHECK : ignoring bit 6 in status %04X\n", status);
cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT,
CB710_MMC_S0_FIFO_UNDERFLOW);
status &= ~CB710_MMC_S0_FIFO_UNDERFLOW;
}
if (status & CB710_MMC_STATUS_ERROR_EVENTS) {
dev_dbg(cb710_slot_dev(slot),
"CHECK : returning EIO on status %04X\n", status);
cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, status & 0xFF);
cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT,
CB710_MMC_S1_RESET);
return -EIO;
}
/* 'what' is a bit in MMC_STATUS1 */
if ((status >> 8) & what) {
cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, what);
return 1;
}
return 0;
}
static int cb710_wait_for_event(struct cb710_slot *slot, u8 what)
{
int err = 0;
unsigned limit = 2000000; /* FIXME: real timeout */
#ifdef CONFIG_CB710_DEBUG
u32 e, x;
e = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
#endif
while (!(err = cb710_check_event(slot, what))) {
if (!--limit) {
cb710_dump_regs(cb710_slot_to_chip(slot),
CB710_DUMP_REGS_MMC);
err = -ETIMEDOUT;
break;
}
udelay(1);
}
#ifdef CONFIG_CB710_DEBUG
x = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
limit = 2000000 - limit;
if (limit > 100)
dev_dbg(cb710_slot_dev(slot),
"WAIT10: waited %d loops, what %d, entry val %08X, exit val %08X\n",
limit, what, e, x);
#endif
return err < 0 ? err : 0;
}
static int cb710_wait_while_busy(struct cb710_slot *slot, uint8_t mask)
{
unsigned limit = 500000; /* FIXME: real timeout */
int err = 0;
#ifdef CONFIG_CB710_DEBUG
u32 e, x;
e = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
#endif
while (cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT) & mask) {
if (!--limit) {
cb710_dump_regs(cb710_slot_to_chip(slot),
CB710_DUMP_REGS_MMC);
err = -ETIMEDOUT;
break;
}
udelay(1);
}
#ifdef CONFIG_CB710_DEBUG
x = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
limit = 500000 - limit;
if (limit > 100)
dev_dbg(cb710_slot_dev(slot),
"WAIT12: waited %d loops, mask %02X, entry val %08X, exit val %08X\n",
limit, mask, e, x);
#endif
return err;
}
static void cb710_mmc_set_transfer_size(struct cb710_slot *slot,
size_t count, size_t blocksize)
{
cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
cb710_write_port_32(slot, CB710_MMC_TRANSFER_SIZE_PORT,
((count - 1) << 16)|(blocksize - 1));
dev_vdbg(cb710_slot_dev(slot), "set up for %zu block%s of %zu bytes\n",
count, count == 1 ? "" : "s", blocksize);
}
static void cb710_mmc_fifo_hack(struct cb710_slot *slot)
{
/* without this, received data is prepended with 8-bytes of zeroes */
u32 r1, r2;
int ok = 0;
r1 = cb710_read_port_32(slot, CB710_MMC_DATA_PORT);
r2 = cb710_read_port_32(slot, CB710_MMC_DATA_PORT);
if (cb710_read_port_8(slot, CB710_MMC_STATUS0_PORT)
& CB710_MMC_S0_FIFO_UNDERFLOW) {
cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT,
CB710_MMC_S0_FIFO_UNDERFLOW);
ok = 1;
}
dev_dbg(cb710_slot_dev(slot),
"FIFO-read-hack: expected STATUS0 bit was %s\n",
ok ? "set." : "NOT SET!");
dev_dbg(cb710_slot_dev(slot),
"FIFO-read-hack: dwords ignored: %08X %08X - %s\n",
r1, r2, (r1|r2) ? "BAD (NOT ZERO)!" : "ok");
}
static int cb710_mmc_receive_pio(struct cb710_slot *slot,
struct sg_mapping_iter *miter, size_t dw_count)
{
if (!(cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT) & CB710_MMC_S2_FIFO_READY)) {
int err = cb710_wait_for_event(slot,
CB710_MMC_S1_PIO_TRANSFER_DONE);
if (err)
return err;
}
cb710_sg_dwiter_write_from_io(miter,
slot->iobase + CB710_MMC_DATA_PORT, dw_count);
return 0;
}
static bool cb710_is_transfer_size_supported(struct mmc_data *data)
{
return !(data->blksz & 15 && (data->blocks != 1 || data->blksz != 8));
}
static int cb710_mmc_receive(struct cb710_slot *slot, struct mmc_data *data)
{
struct sg_mapping_iter miter;
size_t len, blocks = data->blocks;
int err = 0;
/* TODO: I don't know how/if the hardware handles non-16B-boundary blocks
* except single 8B block */
if (unlikely(data->blksz & 15 && (data->blocks != 1 || data->blksz != 8)))
return -EINVAL;
sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_TO_SG);
cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
15, CB710_MMC_C2_READ_PIO_SIZE_MASK);
cb710_mmc_fifo_hack(slot);
while (blocks-- > 0) {
len = data->blksz;
while (len >= 16) {
err = cb710_mmc_receive_pio(slot, &miter, 4);
if (err)
goto out;
len -= 16;
}
if (!len)
continue;
cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
len - 1, CB710_MMC_C2_READ_PIO_SIZE_MASK);
len = (len >= 8) ? 4 : 2;
err = cb710_mmc_receive_pio(slot, &miter, len);
if (err)
goto out;
}
out:
sg_miter_stop(&miter);
return err;
}
static int cb710_mmc_send(struct cb710_slot *slot, struct mmc_data *data)
{
struct sg_mapping_iter miter;
size_t len, blocks = data->blocks;
int err = 0;
/* TODO: I don't know how/if the hardware handles multiple
* non-16B-boundary blocks */
if (unlikely(data->blocks > 1 && data->blksz & 15))
return -EINVAL;
sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_FROM_SG);
cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
0, CB710_MMC_C2_READ_PIO_SIZE_MASK);
while (blocks-- > 0) {
len = (data->blksz + 15) >> 4;
do {
if (!(cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT)
& CB710_MMC_S2_FIFO_EMPTY)) {
err = cb710_wait_for_event(slot,
CB710_MMC_S1_PIO_TRANSFER_DONE);
if (err)
goto out;
}
cb710_sg_dwiter_read_to_io(&miter,
slot->iobase + CB710_MMC_DATA_PORT, 4);
} while (--len);
}
out:
sg_miter_stop(&miter);
return err;
}
static u16 cb710_encode_cmd_flags(struct cb710_mmc_reader *reader,
struct mmc_command *cmd)
{
unsigned int flags = cmd->flags;
u16 cb_flags = 0;
/* Windows driver returned 0 for commands for which no response
* is expected. It happened that there were only two such commands
* used: MMC_GO_IDLE_STATE and MMC_GO_INACTIVE_STATE so it might
* as well be a bug in that driver.
*
* Original driver set bit 14 for MMC/SD application
* commands. There's no difference 'on the wire' and
* it apparently works without it anyway.
*/
switch (flags & MMC_CMD_MASK) {
case MMC_CMD_AC: cb_flags = CB710_MMC_CMD_AC; break;
case MMC_CMD_ADTC: cb_flags = CB710_MMC_CMD_ADTC; break;
case MMC_CMD_BC: cb_flags = CB710_MMC_CMD_BC; break;
case MMC_CMD_BCR: cb_flags = CB710_MMC_CMD_BCR; break;
}
if (flags & MMC_RSP_BUSY)
cb_flags |= CB710_MMC_RSP_BUSY;
cb_flags |= cmd->opcode << CB710_MMC_CMD_CODE_SHIFT;
if (cmd->data && (cmd->data->flags & MMC_DATA_READ))
cb_flags |= CB710_MMC_DATA_READ;
if (flags & MMC_RSP_PRESENT) {
/* Windows driver set 01 at bits 4,3 except for
* MMC_SET_BLOCKLEN where it set 10. Maybe the
* hardware can do something special about this
* command? The original driver looks buggy/incomplete
* anyway so we ignore this for now.
*
* I assume that 00 here means no response is expected.
*/
cb_flags |= CB710_MMC_RSP_PRESENT;
if (flags & MMC_RSP_136)
cb_flags |= CB710_MMC_RSP_136;
if (!(flags & MMC_RSP_CRC))
cb_flags |= CB710_MMC_RSP_NO_CRC;
}
return cb_flags;
}
static void cb710_receive_response(struct cb710_slot *slot,
struct mmc_command *cmd)
{
unsigned rsp_opcode, wanted_opcode;
/* Looks like final byte with CRC is always stripped (same as SDHCI) */
if (cmd->flags & MMC_RSP_136) {
u32 resp[4];
resp[0] = cb710_read_port_32(slot, CB710_MMC_RESPONSE3_PORT);
resp[1] = cb710_read_port_32(slot, CB710_MMC_RESPONSE2_PORT);
resp[2] = cb710_read_port_32(slot, CB710_MMC_RESPONSE1_PORT);
resp[3] = cb710_read_port_32(slot, CB710_MMC_RESPONSE0_PORT);
rsp_opcode = resp[0] >> 24;
cmd->resp[0] = (resp[0] << 8)|(resp[1] >> 24);
cmd->resp[1] = (resp[1] << 8)|(resp[2] >> 24);
cmd->resp[2] = (resp[2] << 8)|(resp[3] >> 24);
cmd->resp[3] = (resp[3] << 8);
} else {
rsp_opcode = cb710_read_port_32(slot, CB710_MMC_RESPONSE1_PORT) & 0x3F;
cmd->resp[0] = cb710_read_port_32(slot, CB710_MMC_RESPONSE0_PORT);
}
wanted_opcode = (cmd->flags & MMC_RSP_OPCODE) ? cmd->opcode : 0x3F;
if (rsp_opcode != wanted_opcode)
cmd->error = -EILSEQ;
}
static int cb710_mmc_transfer_data(struct cb710_slot *slot,
struct mmc_data *data)
{
int error, to;
if (data->flags & MMC_DATA_READ)
error = cb710_mmc_receive(slot, data);
else
error = cb710_mmc_send(slot, data);
to = cb710_wait_for_event(slot, CB710_MMC_S1_DATA_TRANSFER_DONE);
if (!error)
error = to;
if (!error)
data->bytes_xfered = data->blksz * data->blocks;
return error;
}
static int cb710_mmc_command(struct mmc_host *mmc, struct mmc_command *cmd)
{
struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
struct cb710_mmc_reader *reader = mmc_priv(mmc);
struct mmc_data *data = cmd->data;
u16 cb_cmd = cb710_encode_cmd_flags(reader, cmd);
dev_dbg(cb710_slot_dev(slot), "cmd request: 0x%04X\n", cb_cmd);
if (data) {
if (!cb710_is_transfer_size_supported(data)) {
data->error = -EINVAL;
return -1;
}
cb710_mmc_set_transfer_size(slot, data->blocks, data->blksz);
}
cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20|CB710_MMC_S2_BUSY_10);
cb710_write_port_16(slot, CB710_MMC_CMD_TYPE_PORT, cb_cmd);
cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
cb710_write_port_32(slot, CB710_MMC_CMD_PARAM_PORT, cmd->arg);
cb710_mmc_reset_events(slot);
cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x01, 0);
cmd->error = cb710_wait_for_event(slot, CB710_MMC_S1_COMMAND_SENT);
if (cmd->error)
return -1;
if (cmd->flags & MMC_RSP_PRESENT) {
cb710_receive_response(slot, cmd);
if (cmd->error)
return -1;
}
if (data)
data->error = cb710_mmc_transfer_data(slot, data);
return 0;
}
static void cb710_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
{
struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
struct cb710_mmc_reader *reader = mmc_priv(mmc);
WARN_ON(reader->mrq != NULL);
reader->mrq = mrq;
cb710_mmc_enable_irq(slot, CB710_MMC_IE_TEST_MASK, 0);
if (!cb710_mmc_command(mmc, mrq->cmd) && mrq->stop)
cb710_mmc_command(mmc, mrq->stop);
tasklet_schedule(&reader->finish_req_tasklet);
}
static int cb710_mmc_powerup(struct cb710_slot *slot)
{
#ifdef CONFIG_CB710_DEBUG
struct cb710_chip *chip = cb710_slot_to_chip(slot);
#endif
int err;
/* a lot of magic for now */
dev_dbg(cb710_slot_dev(slot), "bus powerup\n");
cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
if (unlikely(err))
return err;
cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x80, 0);
cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0x80, 0);
cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
mdelay(1);
dev_dbg(cb710_slot_dev(slot), "after delay 1\n");
cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
if (unlikely(err))
return err;
cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x09, 0);
cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
mdelay(1);
dev_dbg(cb710_slot_dev(slot), "after delay 2\n");
cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
if (unlikely(err))
return err;
cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0, 0x08);
cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
mdelay(2);
dev_dbg(cb710_slot_dev(slot), "after delay 3\n");
cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x06, 0);
cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x70, 0);
cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT, 0x80, 0);
cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0x03, 0);
cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
if (unlikely(err))
return err;
/* This port behaves weird: quick byte reads of 0x08,0x09 return
* 0xFF,0x00 after writing 0xFFFF to 0x08; it works correctly when
* read/written from userspace... What am I missing here?
* (it doesn't depend on write-to-read delay) */
cb710_write_port_16(slot, CB710_MMC_CONFIGB_PORT, 0xFFFF);
cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x06, 0);
cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
dev_dbg(cb710_slot_dev(slot), "bus powerup finished\n");
return cb710_check_event(slot, 0);
}
static void cb710_mmc_powerdown(struct cb710_slot *slot)
{
cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0, 0x81);
cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0, 0x80);
}
static void cb710_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
struct cb710_mmc_reader *reader = mmc_priv(mmc);
int err;
cb710_mmc_select_clock_divider(mmc, ios->clock);
if (ios->power_mode != reader->last_power_mode)
switch (ios->power_mode) {
case MMC_POWER_ON:
err = cb710_mmc_powerup(slot);
if (err) {
dev_warn(cb710_slot_dev(slot),
"powerup failed (%d)- retrying\n", err);
cb710_mmc_powerdown(slot);
udelay(1);
err = cb710_mmc_powerup(slot);
if (err)
dev_warn(cb710_slot_dev(slot),
"powerup retry failed (%d) - expect errors\n",
err);
}
reader->last_power_mode = MMC_POWER_ON;
break;
case MMC_POWER_OFF:
cb710_mmc_powerdown(slot);
reader->last_power_mode = MMC_POWER_OFF;
break;
case MMC_POWER_UP:
default:
/* ignore */;
}
cb710_mmc_enable_4bit_data(slot, ios->bus_width != MMC_BUS_WIDTH_1);
cb710_mmc_enable_irq(slot, CB710_MMC_IE_TEST_MASK, 0);
}
static int cb710_mmc_get_ro(struct mmc_host *mmc)
{
struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
return cb710_read_port_8(slot, CB710_MMC_STATUS3_PORT)
& CB710_MMC_S3_WRITE_PROTECTED;
}
static int cb710_mmc_get_cd(struct mmc_host *mmc)
{
struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
return cb710_read_port_8(slot, CB710_MMC_STATUS3_PORT)
& CB710_MMC_S3_CARD_DETECTED;
}
static int cb710_mmc_irq_handler(struct cb710_slot *slot)
{
struct mmc_host *mmc = cb710_slot_to_mmc(slot);
struct cb710_mmc_reader *reader = mmc_priv(mmc);
u32 status, config1, config2, irqen;
status = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
irqen = cb710_read_port_32(slot, CB710_MMC_IRQ_ENABLE_PORT);
config2 = cb710_read_port_32(slot, CB710_MMC_CONFIGB_PORT);
config1 = cb710_read_port_32(slot, CB710_MMC_CONFIG_PORT);
dev_dbg(cb710_slot_dev(slot), "interrupt; status: %08X, "
"ie: %08X, c2: %08X, c1: %08X\n",
status, irqen, config2, config1);
if (status & (CB710_MMC_S1_CARD_CHANGED << 8)) {
/* ack the event */
cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT,
CB710_MMC_S1_CARD_CHANGED);
if ((irqen & CB710_MMC_IE_CISTATUS_MASK)
== CB710_MMC_IE_CISTATUS_MASK)
mmc_detect_change(mmc, HZ/5);
} else {
dev_dbg(cb710_slot_dev(slot), "unknown interrupt (test)\n");
spin_lock(&reader->irq_lock);
__cb710_mmc_enable_irq(slot, 0, CB710_MMC_IE_TEST_MASK);
spin_unlock(&reader->irq_lock);
}
return 1;
}
static void cb710_mmc_finish_request_tasklet(unsigned long data)
{
struct mmc_host *mmc = (void *)data;
struct cb710_mmc_reader *reader = mmc_priv(mmc);
struct mmc_request *mrq = reader->mrq;
reader->mrq = NULL;
mmc_request_done(mmc, mrq);
}
static const struct mmc_host_ops cb710_mmc_host = {
.request = cb710_mmc_request,
.set_ios = cb710_mmc_set_ios,
.get_ro = cb710_mmc_get_ro,
.get_cd = cb710_mmc_get_cd,
};
#ifdef CONFIG_PM
static int cb710_mmc_suspend(struct platform_device *pdev, pm_message_t state)
{
struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
struct mmc_host *mmc = cb710_slot_to_mmc(slot);
int err;
err = mmc_suspend_host(mmc);
if (err)
return err;
cb710_mmc_enable_irq(slot, 0, ~0);
return 0;
}
static int cb710_mmc_resume(struct platform_device *pdev)
{
struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
struct mmc_host *mmc = cb710_slot_to_mmc(slot);
cb710_mmc_enable_irq(slot, 0, ~0);
return mmc_resume_host(mmc);
}
#endif /* CONFIG_PM */
static int __devinit cb710_mmc_init(struct platform_device *pdev)
{
struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
struct cb710_chip *chip = cb710_slot_to_chip(slot);
struct mmc_host *mmc;
struct cb710_mmc_reader *reader;
int err;
u32 val;
mmc = mmc_alloc_host(sizeof(*reader), cb710_slot_dev(slot));
if (!mmc)
return -ENOMEM;
dev_set_drvdata(&pdev->dev, mmc);
/* harmless (maybe) magic */
pci_read_config_dword(chip->pdev, 0x48, &val);
val = cb710_src_freq_mhz[(val >> 16) & 0xF];
dev_dbg(cb710_slot_dev(slot), "source frequency: %dMHz\n", val);
val *= 1000000;
mmc->ops = &cb710_mmc_host;
mmc->f_max = val;
mmc->f_min = val >> cb710_clock_divider_log2[CB710_MAX_DIVIDER_IDX];
mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34;
mmc->caps = MMC_CAP_4_BIT_DATA;
reader = mmc_priv(mmc);
tasklet_init(&reader->finish_req_tasklet,
cb710_mmc_finish_request_tasklet, (unsigned long)mmc);
spin_lock_init(&reader->irq_lock);
cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
cb710_mmc_enable_irq(slot, 0, ~0);
cb710_set_irq_handler(slot, cb710_mmc_irq_handler);
err = mmc_add_host(mmc);
if (unlikely(err))
goto err_free_mmc;
dev_dbg(cb710_slot_dev(slot), "mmc_hostname is %s\n",
mmc_hostname(mmc));
cb710_mmc_enable_irq(slot, CB710_MMC_IE_CARD_INSERTION_STATUS, 0);
return 0;
err_free_mmc:
dev_dbg(cb710_slot_dev(slot), "mmc_add_host() failed: %d\n", err);
cb710_set_irq_handler(slot, NULL);
mmc_free_host(mmc);
return err;
}
static int __devexit cb710_mmc_exit(struct platform_device *pdev)
{
struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
struct mmc_host *mmc = cb710_slot_to_mmc(slot);
struct cb710_mmc_reader *reader = mmc_priv(mmc);
cb710_mmc_enable_irq(slot, 0, CB710_MMC_IE_CARD_INSERTION_STATUS);
mmc_remove_host(mmc);
/* IRQs should be disabled now, but let's stay on the safe side */
cb710_mmc_enable_irq(slot, 0, ~0);
cb710_set_irq_handler(slot, NULL);
/* clear config ports - just in case */
cb710_write_port_32(slot, CB710_MMC_CONFIG_PORT, 0);
cb710_write_port_16(slot, CB710_MMC_CONFIGB_PORT, 0);
tasklet_kill(&reader->finish_req_tasklet);
mmc_free_host(mmc);
return 0;
}
static struct platform_driver cb710_mmc_driver = {
.driver.name = "cb710-mmc",
.probe = cb710_mmc_init,
.remove = __devexit_p(cb710_mmc_exit),
#ifdef CONFIG_PM
.suspend = cb710_mmc_suspend,
.resume = cb710_mmc_resume,
#endif
};
module_platform_driver(cb710_mmc_driver);
MODULE_AUTHOR("Michał Mirosław <mirq-linux@rere.qmqm.pl>");
MODULE_DESCRIPTION("ENE CB710 memory card reader driver - MMC/SD part");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:cb710-mmc");
Reference in a new issue View git blame Copy permalink