linux/arch/arm/mach-pxa
Stanislav Brabec 5e0fa3f63e [ARM] pxa/zaurus: fix NAND flash OOB layout for Borzoi
Borzoi, Terrier and Akita use the same NAND Flash OOB layout, which
seems to be different from Spitz for some reason. Here is a fix.

When the code was ported to the platform data, the map was applied just
for Akita.

After this patch, Flash works again on Borzoi. Terrier still has a
problem with partition table different from Borzoi (unfixable without
reading of the system configuration in flash) and JFFS2 partitions can
be mounted (with some "Empty flash at ... ends at ..." in the syslog).

Signed-off-by: Stanislav Brabec <utx@penguin.cz>
Acked-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-03 10:49:53 +08:00
..
include/mach Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel 2009-09-21 16:02:30 +01:00
am200epd.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
am300epd.c
balloon3.c [ARM] pxa: balloon3 (http://balloonboard.org/) base machine support 2009-09-10 18:49:39 +08:00
clock.c [ARM] 5536/1: Move clk_add_alias() to arch/arm/common/clkdev.c 2009-06-04 17:45:43 +01:00
clock.h [ARM] pxa: remove left-over struct clk *other field from struct clk 2009-09-10 18:49:23 +08:00
cm-x2xx-pci.c [ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h 2009-03-09 21:22:38 +08:00
cm-x2xx-pci.h
cm-x2xx.c [ARM] pxa/cm-x2xx: fix ucb1400 not being registered 2009-04-04 10:26:34 +08:00
cm-x255.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
cm-x270.c [ARM] pxa/cm-x270: add libertas device registration 2009-09-10 18:49:34 +08:00
cm-x300.c [ARM] pxa/cm-x300: fix mmc numbering 2009-10-17 22:55:44 +08:00
colibri-pxa3xx.c [ARM] pxa/colibri: add NAND config for Colibri PXA3xx boards 2009-09-10 18:49:31 +08:00
colibri-pxa270.c [ARM] pxa: rename colibri.c to colibri-pxa270.c 2009-03-23 09:57:54 +08:00
colibri-pxa300.c [ARM] pxa/colibri: add NAND config for Colibri PXA3xx boards 2009-09-10 18:49:31 +08:00
colibri-pxa320.c [ARM] pxa/colibri: add UART MFP configuration for the PXA320 module 2009-09-10 18:49:31 +08:00
corgi.c [ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c 2009-09-10 18:49:39 +08:00
corgi_lcd.c [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
corgi_pm.c [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one 2009-06-11 22:20:42 +08:00
corgi_ssp.c [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
cpufreq-pxa2xx.c [ARM] pxa: workaround errata #37 by not using half turbo switching 2009-10-12 15:30:50 +08:00
cpufreq-pxa3xx.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
csb701.c [ARM] pxa/csb701: do not register devices on non-csb726 boads 2009-04-04 10:26:35 +08:00
csb726.c [ARM] pxa/csb726: adjust duplicate structure field initialization 2009-10-12 15:30:50 +08:00
devices.c [ARM] pxa: add device definition for graphics controller 2009-09-10 18:49:27 +08:00
devices.h [ARM] pxa: add device definition for graphics controller 2009-09-10 18:49:27 +08:00
e330.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
e350.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
e400.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
e740.c [ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c 2009-09-10 18:49:39 +08:00
e750.c [ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c 2009-09-10 18:49:39 +08:00
e800.c [ARM] pxa: register AC97 controller devices 2009-04-04 21:54:40 +08:00
em-x270.c [ARM] pxa/em-x270: add vcc_core regulator 2009-09-10 18:49:34 +08:00
eseries.c [ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c 2009-09-10 18:49:39 +08:00
eseries.h
ezx.c [ARM] pxa/ezx: setup gpio-keys for EzX phones 2009-06-05 10:50:22 +08:00
generic.c [ARM] pxa: move GPIO register definitions into <mach/gpio.h> 2009-03-09 21:22:37 +08:00
generic.h [ARM] pxa: add missing declaration of pxa26x_init_irq() 2009-04-13 12:10:36 +08:00
gumstix.c [ARM] pxa: factor pxamci gpio handling 2009-09-10 18:49:30 +08:00
h5000.c Merge branch 'origin' into devel 2009-03-28 20:29:51 +00:00
himalaya.c [ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h 2009-03-09 21:22:38 +08:00
hx4700.c [ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c 2009-09-10 18:49:39 +08:00
idp.c [ARM] pxa: factor pxamci gpio handling 2009-09-10 18:49:30 +08:00
imote2.c [ARM] pxa: factor pxamci gpio handling 2009-09-10 18:49:30 +08:00
irq.c [ARM] pxa: initialize default interrupt priority and use ICHP for IRQ handling 2009-09-10 18:49:26 +08:00
Kconfig [ARM] pxa: balloon3 (http://balloonboard.org/) base machine support 2009-09-10 18:49:39 +08:00
leds-idp.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
leds-lubbock.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
leds-mainstone.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
leds.c
leds.h
littleton.c [ARM] pxa/littleton: update littleton to use the new gpio_card_detect for mmc 2009-09-10 18:49:30 +08:00
lpd270.c [ARM] pxa: move GPIO register definitions into <mach/gpio.h> 2009-03-09 21:22:37 +08:00
lubbock.c [ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c 2009-09-10 18:49:39 +08:00
magician.c [ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c 2009-09-10 18:49:39 +08:00
mainstone.c [ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c 2009-09-10 18:49:39 +08:00
Makefile [ARM] pxa: balloon3 (http://balloonboard.org/) base machine support 2009-09-10 18:49:39 +08:00
Makefile.boot
mfp-pxa2xx.c [ARM] pxa: enable GPIO receivers after configuring pins 2009-05-18 21:52:09 +08:00
mfp-pxa3xx.c [ARM] pxa: move common MFP handling code into plat-pxa 2009-03-23 10:11:34 +08:00
mioa701.c [ARM] pxa/mioa701: convert mioa701 to the new platform-device soc-camera interface 2009-09-10 18:49:32 +08:00
mioa701_bootresume.S
mp900.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
palmld.c [ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c 2009-09-10 18:49:39 +08:00
palmt5.c [ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c 2009-09-10 18:49:39 +08:00
palmtc.c [ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c 2009-09-10 18:49:39 +08:00
palmte2.c [ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c 2009-09-10 18:49:39 +08:00
palmtx.c [ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c 2009-09-10 18:49:39 +08:00
palmz72.c [ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c 2009-09-10 18:49:39 +08:00
pcm027.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
pcm990-baseboard.c [ARM] pxa/pcm990: convert pcm990 to soc-camera as platform-device 2009-09-10 18:49:31 +08:00
pm.c [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines 2009-06-11 23:25:09 +08:00
poodle.c [ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c 2009-09-10 18:49:39 +08:00
pxa2xx.c [ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c 2009-09-10 18:49:39 +08:00
pxa3xx.c [ARM] pxa: correct I2CPWR clock for pxa3xx 2009-07-03 14:13:49 +08:00
pxa25x.c [ARM] pxa: move IRQ handling of GPIO 0 and 1 outside of gpio.c 2009-03-09 21:22:37 +08:00
pxa27x.c [ARM] pxa: add ability to set suspend mode 2009-06-05 10:32:48 +08:00
pxa300.c [ARM] pxa: add clock definition for graphics controller 2009-09-10 18:49:26 +08:00
pxa320.c [ARM] pxa: add clock definition for graphics controller 2009-09-10 18:49:26 +08:00
pxa930.c [ARM] pxa: support mfp of pxa935 2009-09-10 18:49:24 +08:00
reset.c [ARM] pxa: allow gpio_reset drive high during normal work 2009-05-18 21:52:09 +08:00
saar.c [ARM] pxa: move mach/i2c.h to plat/i2c.h 2009-06-05 10:32:01 +08:00
sharpsl.h [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one 2009-06-11 22:20:42 +08:00
sharpsl_pm.c [ARM] pxa/sharpsl_pm: zaurus c3000 aka spitz: fix resume 2009-09-07 23:14:59 +08:00
sleep.S [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
smemc.c
spitz.c [ARM] pxa/zaurus: fix NAND flash OOB layout for Borzoi 2009-11-03 10:49:53 +08:00
spitz_pm.c [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one 2009-06-11 22:20:42 +08:00
ssp.c [ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h 2009-03-09 21:22:38 +08:00
standby.S [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
stargate2.c [ARM] pxa: Stargate 2 board support 2009-06-05 10:46:17 +08:00
tavorevb.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
time.c clocksource: pass clocksource to read() callback 2009-04-21 13:41:47 -07:00
tosa-bt.c rfkill: rewrite 2009-06-03 14:06:13 -04:00
tosa.c [ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c 2009-09-10 18:49:39 +08:00
treo680.c [ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c 2009-09-10 18:49:39 +08:00
trizeps4.c [ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c 2009-09-10 18:49:39 +08:00
viper.c [ARM] pxa: move mach/i2c.h to plat/i2c.h 2009-06-05 10:32:01 +08:00
xcep.c [ARM] pxa: add support for the IskraTel XCEP board 2009-09-10 18:49:38 +08:00
zylonite.c [ARM] pxa: factor pxamci gpio handling 2009-09-10 18:49:30 +08:00
zylonite_pxa300.c [ARM] pxa: fix gpio issue in zylonite 2009-07-18 10:00:08 +08:00
zylonite_pxa320.c [ARM] pxa: fix gpio issue in zylonite 2009-07-18 10:00:08 +08:00