linux/arch/unicore32/kernel/irq.c
Rafael J. Wysocki f98bf4aa39 PM / UNICORE32: Use struct syscore_ops instead of sysdevs for PM
Make some UNICORE32 architecture's code use struct syscore_ops
objects for power management instead of sysdev classes and sysdevs.

This simplifies the code and reduces the kernel's memory footprint.
It also is necessary for removing sysdevs from the kernel entirely in
the future.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
2011-05-11 21:37:15 +02:00

377 lines
8.3 KiB
C

/*
* linux/arch/unicore32/kernel/irq.c
*
* Code specific to PKUnity SoC and UniCore ISA
*
* Copyright (C) 2001-2010 GUAN Xue-tao
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel_stat.h>
#include <linux/module.h>
#include <linux/signal.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/random.h>
#include <linux/smp.h>
#include <linux/init.h>
#include <linux/seq_file.h>
#include <linux/errno.h>
#include <linux/list.h>
#include <linux/kallsyms.h>
#include <linux/proc_fs.h>
#include <linux/syscore_ops.h>
#include <linux/gpio.h>
#include <asm/system.h>
#include <mach/hardware.h>
#include "setup.h"
/*
* PKUnity GPIO edge detection for IRQs:
* IRQs are generated on Falling-Edge, Rising-Edge, or both.
* Use this instead of directly setting GRER/GFER.
*/
static int GPIO_IRQ_rising_edge;
static int GPIO_IRQ_falling_edge;
static int GPIO_IRQ_mask = 0;
#define GPIO_MASK(irq) (1 << (irq - IRQ_GPIO0))
static int puv3_gpio_type(struct irq_data *d, unsigned int type)
{
unsigned int mask;
if (d->irq < IRQ_GPIOHIGH)
mask = 1 << d->irq;
else
mask = GPIO_MASK(d->irq);
if (type == IRQ_TYPE_PROBE) {
if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
return 0;
type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
}
if (type & IRQ_TYPE_EDGE_RISING)
GPIO_IRQ_rising_edge |= mask;
else
GPIO_IRQ_rising_edge &= ~mask;
if (type & IRQ_TYPE_EDGE_FALLING)
GPIO_IRQ_falling_edge |= mask;
else
GPIO_IRQ_falling_edge &= ~mask;
writel(GPIO_IRQ_rising_edge & GPIO_IRQ_mask, GPIO_GRER);
writel(GPIO_IRQ_falling_edge & GPIO_IRQ_mask, GPIO_GFER);
return 0;
}
/*
* GPIO IRQs must be acknowledged. This is for IRQs from 0 to 7.
*/
static void puv3_low_gpio_ack(struct irq_data *d)
{
writel((1 << d->irq), GPIO_GEDR);
}
static void puv3_low_gpio_mask(struct irq_data *d)
{
writel(readl(INTC_ICMR) & ~(1 << d->irq), INTC_ICMR);
}
static void puv3_low_gpio_unmask(struct irq_data *d)
{
writel(readl(INTC_ICMR) | (1 << d->irq), INTC_ICMR);
}
static int puv3_low_gpio_wake(struct irq_data *d, unsigned int on)
{
if (on)
writel(readl(PM_PWER) | (1 << d->irq), PM_PWER);
else
writel(readl(PM_PWER) & ~(1 << d->irq), PM_PWER);
return 0;
}
static struct irq_chip puv3_low_gpio_chip = {
.name = "GPIO-low",
.irq_ack = puv3_low_gpio_ack,
.irq_mask = puv3_low_gpio_mask,
.irq_unmask = puv3_low_gpio_unmask,
.irq_set_type = puv3_gpio_type,
.irq_set_wake = puv3_low_gpio_wake,
};
/*
* IRQ8 (GPIO0 through 27) handler. We enter here with the
* irq_controller_lock held, and IRQs disabled. Decode the IRQ
* and call the handler.
*/
static void
puv3_gpio_handler(unsigned int irq, struct irq_desc *desc)
{
unsigned int mask;
mask = readl(GPIO_GEDR);
do {
/*
* clear down all currently active IRQ sources.
* We will be processing them all.
*/
writel(mask, GPIO_GEDR);
irq = IRQ_GPIO0;
do {
if (mask & 1)
generic_handle_irq(irq);
mask >>= 1;
irq++;
} while (mask);
mask = readl(GPIO_GEDR);
} while (mask);
}
/*
* GPIO0-27 edge IRQs need to be handled specially.
* In addition, the IRQs are all collected up into one bit in the
* interrupt controller registers.
*/
static void puv3_high_gpio_ack(struct irq_data *d)
{
unsigned int mask = GPIO_MASK(d->irq);
writel(mask, GPIO_GEDR);
}
static void puv3_high_gpio_mask(struct irq_data *d)
{
unsigned int mask = GPIO_MASK(d->irq);
GPIO_IRQ_mask &= ~mask;
writel(readl(GPIO_GRER) & ~mask, GPIO_GRER);
writel(readl(GPIO_GFER) & ~mask, GPIO_GFER);
}
static void puv3_high_gpio_unmask(struct irq_data *d)
{
unsigned int mask = GPIO_MASK(d->irq);
GPIO_IRQ_mask |= mask;
writel(GPIO_IRQ_rising_edge & GPIO_IRQ_mask, GPIO_GRER);
writel(GPIO_IRQ_falling_edge & GPIO_IRQ_mask, GPIO_GFER);
}
static int puv3_high_gpio_wake(struct irq_data *d, unsigned int on)
{
if (on)
writel(readl(PM_PWER) | PM_PWER_GPIOHIGH, PM_PWER);
else
writel(readl(PM_PWER) & ~PM_PWER_GPIOHIGH, PM_PWER);
return 0;
}
static struct irq_chip puv3_high_gpio_chip = {
.name = "GPIO-high",
.irq_ack = puv3_high_gpio_ack,
.irq_mask = puv3_high_gpio_mask,
.irq_unmask = puv3_high_gpio_unmask,
.irq_set_type = puv3_gpio_type,
.irq_set_wake = puv3_high_gpio_wake,
};
/*
* We don't need to ACK IRQs on the PKUnity unless they're GPIOs
* this is for internal IRQs i.e. from 8 to 31.
*/
static void puv3_mask_irq(struct irq_data *d)
{
writel(readl(INTC_ICMR) & ~(1 << d->irq), INTC_ICMR);
}
static void puv3_unmask_irq(struct irq_data *d)
{
writel(readl(INTC_ICMR) | (1 << d->irq), INTC_ICMR);
}
/*
* Apart form GPIOs, only the RTC alarm can be a wakeup event.
*/
static int puv3_set_wake(struct irq_data *d, unsigned int on)
{
if (d->irq == IRQ_RTCAlarm) {
if (on)
writel(readl(PM_PWER) | PM_PWER_RTC, PM_PWER);
else
writel(readl(PM_PWER) & ~PM_PWER_RTC, PM_PWER);
return 0;
}
return -EINVAL;
}
static struct irq_chip puv3_normal_chip = {
.name = "PKUnity-v3",
.irq_ack = puv3_mask_irq,
.irq_mask = puv3_mask_irq,
.irq_unmask = puv3_unmask_irq,
.irq_set_wake = puv3_set_wake,
};
static struct resource irq_resource = {
.name = "irqs",
.start = io_v2p(PKUNITY_INTC_BASE),
.end = io_v2p(PKUNITY_INTC_BASE) + 0xFFFFF,
};
static struct puv3_irq_state {
unsigned int saved;
unsigned int icmr;
unsigned int iclr;
unsigned int iccr;
} puv3_irq_state;
static int puv3_irq_suspend(void)
{
struct puv3_irq_state *st = &puv3_irq_state;
st->saved = 1;
st->icmr = readl(INTC_ICMR);
st->iclr = readl(INTC_ICLR);
st->iccr = readl(INTC_ICCR);
/*
* Disable all GPIO-based interrupts.
*/
writel(readl(INTC_ICMR) & ~(0x1ff), INTC_ICMR);
/*
* Set the appropriate edges for wakeup.
*/
writel(readl(PM_PWER) & GPIO_IRQ_rising_edge, GPIO_GRER);
writel(readl(PM_PWER) & GPIO_IRQ_falling_edge, GPIO_GFER);
/*
* Clear any pending GPIO interrupts.
*/
writel(readl(GPIO_GEDR), GPIO_GEDR);
return 0;
}
static void puv3_irq_resume(void)
{
struct puv3_irq_state *st = &puv3_irq_state;
if (st->saved) {
writel(st->iccr, INTC_ICCR);
writel(st->iclr, INTC_ICLR);
writel(GPIO_IRQ_rising_edge & GPIO_IRQ_mask, GPIO_GRER);
writel(GPIO_IRQ_falling_edge & GPIO_IRQ_mask, GPIO_GFER);
writel(st->icmr, INTC_ICMR);
}
}
static struct syscore_ops puv3_irq_syscore_ops = {
.suspend = puv3_irq_suspend,
.resume = puv3_irq_resume,
};
static int __init puv3_irq_init_syscore(void)
{
register_syscore_ops(&puv3_irq_syscore_ops);
return 0;
}
device_initcall(puv3_irq_init_syscore);
void __init init_IRQ(void)
{
unsigned int irq;
request_resource(&iomem_resource, &irq_resource);
/* disable all IRQs */
writel(0, INTC_ICMR);
/* all IRQs are IRQ, not REAL */
writel(0, INTC_ICLR);
/* clear all GPIO edge detects */
writel(FMASK(8, 0) & ~FIELD(1, 1, GPI_SOFF_REQ), GPIO_GPIR);
writel(0, GPIO_GFER);
writel(0, GPIO_GRER);
writel(0x0FFFFFFF, GPIO_GEDR);
writel(1, INTC_ICCR);
for (irq = 0; irq < IRQ_GPIOHIGH; irq++) {
irq_set_chip(irq, &puv3_low_gpio_chip);
irq_set_handler(irq, handle_edge_irq);
irq_modify_status(irq,
IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN,
0);
}
for (irq = IRQ_GPIOHIGH + 1; irq < IRQ_GPIO0; irq++) {
irq_set_chip(irq, &puv3_normal_chip);
irq_set_handler(irq, handle_level_irq);
irq_modify_status(irq,
IRQ_NOREQUEST | IRQ_NOAUTOEN,
IRQ_NOPROBE);
}
for (irq = IRQ_GPIO0; irq <= IRQ_GPIO27; irq++) {
irq_set_chip(irq, &puv3_high_gpio_chip);
irq_set_handler(irq, handle_edge_irq);
irq_modify_status(irq,
IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN,
0);
}
/*
* Install handler for GPIO 0-27 edge detect interrupts
*/
irq_set_chip(IRQ_GPIOHIGH, &puv3_normal_chip);
irq_set_chained_handler(IRQ_GPIOHIGH, puv3_gpio_handler);
#ifdef CONFIG_PUV3_GPIO
puv3_init_gpio();
#endif
}
/*
* do_IRQ handles all hardware IRQ's. Decoded IRQs should not
* come via this function. Instead, they should provide their
* own 'handler'
*/
asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
irq_enter();
/*
* Some hardware gives randomly wrong interrupts. Rather
* than crashing, do something sensible.
*/
if (unlikely(irq >= nr_irqs)) {
if (printk_ratelimit())
printk(KERN_WARNING "Bad IRQ%u\n", irq);
ack_bad_irq(irq);
} else {
generic_handle_irq(irq);
}
irq_exit();
set_irq_regs(old_regs);
}