98f41f694f
Zheng Liang(lzheng@redhat.com) found a bug that if we config bonding with arp monitor, sometimes bonding driver cannot get the speed and duplex from its slaves, it will assume them to be 100Mb/sec and Full, please see /proc/net/bonding/bond0. But there is no such problem when uses miimon. (Take igb for example) I find that the reason is that after dev_open() in bond_enslave(), bond_update_speed_duplex() will call igb_get_settings() , but in that function, it runs ethtool_cmd_speed_set(ecmd, -1); ecmd->duplex = -1; because igb get an error value of status. So even dev_open() is called, but the device is not really ready to get its settings. Maybe it is safe for us to call igb_get_settings() only after this message shows up, that is "igb: p4p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX". So I prefer to update the speed and duplex for a slave when reseices NETDEV_CHANGE/NETDEV_UP event. Changelog V2: 1 remove the "fake 100/Full" logic in bond_update_speed_duplex(), set speed and duplex to -1 when it gets error value of speed and duplex. 2 delete the warning in bond_enslave() if bond_update_speed_duplex() returns error. 3 make bond_info_show_slave() handle bad values of speed and duplex. Signed-off-by: Weiping Pan <wpan@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
4971 lines
130 KiB
C
4971 lines
130 KiB
C
/*
|
|
* originally based on the dummy device.
|
|
*
|
|
* Copyright 1999, Thomas Davis, tadavis@lbl.gov.
|
|
* Licensed under the GPL. Based on dummy.c, and eql.c devices.
|
|
*
|
|
* bonding.c: an Ethernet Bonding driver
|
|
*
|
|
* This is useful to talk to a Cisco EtherChannel compatible equipment:
|
|
* Cisco 5500
|
|
* Sun Trunking (Solaris)
|
|
* Alteon AceDirector Trunks
|
|
* Linux Bonding
|
|
* and probably many L2 switches ...
|
|
*
|
|
* How it works:
|
|
* ifconfig bond0 ipaddress netmask up
|
|
* will setup a network device, with an ip address. No mac address
|
|
* will be assigned at this time. The hw mac address will come from
|
|
* the first slave bonded to the channel. All slaves will then use
|
|
* this hw mac address.
|
|
*
|
|
* ifconfig bond0 down
|
|
* will release all slaves, marking them as down.
|
|
*
|
|
* ifenslave bond0 eth0
|
|
* will attach eth0 to bond0 as a slave. eth0 hw mac address will either
|
|
* a: be used as initial mac address
|
|
* b: if a hw mac address already is there, eth0's hw mac address
|
|
* will then be set from bond0.
|
|
*
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/fcntl.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ptrace.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/in.h>
|
|
#include <net/ip.h>
|
|
#include <linux/ip.h>
|
|
#include <linux/tcp.h>
|
|
#include <linux/udp.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/string.h>
|
|
#include <linux/init.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/socket.h>
|
|
#include <linux/ctype.h>
|
|
#include <linux/inet.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/io.h>
|
|
#include <asm/system.h>
|
|
#include <asm/dma.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/inetdevice.h>
|
|
#include <linux/igmp.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <net/sock.h>
|
|
#include <linux/rtnetlink.h>
|
|
#include <linux/smp.h>
|
|
#include <linux/if_ether.h>
|
|
#include <net/arp.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/if_vlan.h>
|
|
#include <linux/if_bonding.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/preempt.h>
|
|
#include <net/route.h>
|
|
#include <net/net_namespace.h>
|
|
#include <net/netns/generic.h>
|
|
#include "bonding.h"
|
|
#include "bond_3ad.h"
|
|
#include "bond_alb.h"
|
|
|
|
/*---------------------------- Module parameters ----------------------------*/
|
|
|
|
/* monitor all links that often (in milliseconds). <=0 disables monitoring */
|
|
#define BOND_LINK_MON_INTERV 0
|
|
#define BOND_LINK_ARP_INTERV 0
|
|
|
|
static int max_bonds = BOND_DEFAULT_MAX_BONDS;
|
|
static int tx_queues = BOND_DEFAULT_TX_QUEUES;
|
|
static int num_peer_notif = 1;
|
|
static int miimon = BOND_LINK_MON_INTERV;
|
|
static int updelay;
|
|
static int downdelay;
|
|
static int use_carrier = 1;
|
|
static char *mode;
|
|
static char *primary;
|
|
static char *primary_reselect;
|
|
static char *lacp_rate;
|
|
static int min_links;
|
|
static char *ad_select;
|
|
static char *xmit_hash_policy;
|
|
static int arp_interval = BOND_LINK_ARP_INTERV;
|
|
static char *arp_ip_target[BOND_MAX_ARP_TARGETS];
|
|
static char *arp_validate;
|
|
static char *fail_over_mac;
|
|
static int all_slaves_active = 0;
|
|
static struct bond_params bonding_defaults;
|
|
static int resend_igmp = BOND_DEFAULT_RESEND_IGMP;
|
|
|
|
module_param(max_bonds, int, 0);
|
|
MODULE_PARM_DESC(max_bonds, "Max number of bonded devices");
|
|
module_param(tx_queues, int, 0);
|
|
MODULE_PARM_DESC(tx_queues, "Max number of transmit queues (default = 16)");
|
|
module_param_named(num_grat_arp, num_peer_notif, int, 0644);
|
|
MODULE_PARM_DESC(num_grat_arp, "Number of peer notifications to send on "
|
|
"failover event (alias of num_unsol_na)");
|
|
module_param_named(num_unsol_na, num_peer_notif, int, 0644);
|
|
MODULE_PARM_DESC(num_unsol_na, "Number of peer notifications to send on "
|
|
"failover event (alias of num_grat_arp)");
|
|
module_param(miimon, int, 0);
|
|
MODULE_PARM_DESC(miimon, "Link check interval in milliseconds");
|
|
module_param(updelay, int, 0);
|
|
MODULE_PARM_DESC(updelay, "Delay before considering link up, in milliseconds");
|
|
module_param(downdelay, int, 0);
|
|
MODULE_PARM_DESC(downdelay, "Delay before considering link down, "
|
|
"in milliseconds");
|
|
module_param(use_carrier, int, 0);
|
|
MODULE_PARM_DESC(use_carrier, "Use netif_carrier_ok (vs MII ioctls) in miimon; "
|
|
"0 for off, 1 for on (default)");
|
|
module_param(mode, charp, 0);
|
|
MODULE_PARM_DESC(mode, "Mode of operation; 0 for balance-rr, "
|
|
"1 for active-backup, 2 for balance-xor, "
|
|
"3 for broadcast, 4 for 802.3ad, 5 for balance-tlb, "
|
|
"6 for balance-alb");
|
|
module_param(primary, charp, 0);
|
|
MODULE_PARM_DESC(primary, "Primary network device to use");
|
|
module_param(primary_reselect, charp, 0);
|
|
MODULE_PARM_DESC(primary_reselect, "Reselect primary slave "
|
|
"once it comes up; "
|
|
"0 for always (default), "
|
|
"1 for only if speed of primary is "
|
|
"better, "
|
|
"2 for only on active slave "
|
|
"failure");
|
|
module_param(lacp_rate, charp, 0);
|
|
MODULE_PARM_DESC(lacp_rate, "LACPDU tx rate to request from 802.3ad partner; "
|
|
"0 for slow, 1 for fast");
|
|
module_param(ad_select, charp, 0);
|
|
MODULE_PARM_DESC(ad_select, "803.ad aggregation selection logic; "
|
|
"0 for stable (default), 1 for bandwidth, "
|
|
"2 for count");
|
|
module_param(min_links, int, 0);
|
|
MODULE_PARM_DESC(min_links, "Minimum number of available links before turning on carrier");
|
|
|
|
module_param(xmit_hash_policy, charp, 0);
|
|
MODULE_PARM_DESC(xmit_hash_policy, "balance-xor and 802.3ad hashing method; "
|
|
"0 for layer 2 (default), 1 for layer 3+4, "
|
|
"2 for layer 2+3");
|
|
module_param(arp_interval, int, 0);
|
|
MODULE_PARM_DESC(arp_interval, "arp interval in milliseconds");
|
|
module_param_array(arp_ip_target, charp, NULL, 0);
|
|
MODULE_PARM_DESC(arp_ip_target, "arp targets in n.n.n.n form");
|
|
module_param(arp_validate, charp, 0);
|
|
MODULE_PARM_DESC(arp_validate, "validate src/dst of ARP probes; "
|
|
"0 for none (default), 1 for active, "
|
|
"2 for backup, 3 for all");
|
|
module_param(fail_over_mac, charp, 0);
|
|
MODULE_PARM_DESC(fail_over_mac, "For active-backup, do not set all slaves to "
|
|
"the same MAC; 0 for none (default), "
|
|
"1 for active, 2 for follow");
|
|
module_param(all_slaves_active, int, 0);
|
|
MODULE_PARM_DESC(all_slaves_active, "Keep all frames received on an interface"
|
|
"by setting active flag for all slaves; "
|
|
"0 for never (default), 1 for always.");
|
|
module_param(resend_igmp, int, 0);
|
|
MODULE_PARM_DESC(resend_igmp, "Number of IGMP membership reports to send on "
|
|
"link failure");
|
|
|
|
/*----------------------------- Global variables ----------------------------*/
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
atomic_t netpoll_block_tx = ATOMIC_INIT(0);
|
|
#endif
|
|
|
|
int bond_net_id __read_mostly;
|
|
|
|
static __be32 arp_target[BOND_MAX_ARP_TARGETS];
|
|
static int arp_ip_count;
|
|
static int bond_mode = BOND_MODE_ROUNDROBIN;
|
|
static int xmit_hashtype = BOND_XMIT_POLICY_LAYER2;
|
|
static int lacp_fast;
|
|
|
|
const struct bond_parm_tbl bond_lacp_tbl[] = {
|
|
{ "slow", AD_LACP_SLOW},
|
|
{ "fast", AD_LACP_FAST},
|
|
{ NULL, -1},
|
|
};
|
|
|
|
const struct bond_parm_tbl bond_mode_tbl[] = {
|
|
{ "balance-rr", BOND_MODE_ROUNDROBIN},
|
|
{ "active-backup", BOND_MODE_ACTIVEBACKUP},
|
|
{ "balance-xor", BOND_MODE_XOR},
|
|
{ "broadcast", BOND_MODE_BROADCAST},
|
|
{ "802.3ad", BOND_MODE_8023AD},
|
|
{ "balance-tlb", BOND_MODE_TLB},
|
|
{ "balance-alb", BOND_MODE_ALB},
|
|
{ NULL, -1},
|
|
};
|
|
|
|
const struct bond_parm_tbl xmit_hashtype_tbl[] = {
|
|
{ "layer2", BOND_XMIT_POLICY_LAYER2},
|
|
{ "layer3+4", BOND_XMIT_POLICY_LAYER34},
|
|
{ "layer2+3", BOND_XMIT_POLICY_LAYER23},
|
|
{ NULL, -1},
|
|
};
|
|
|
|
const struct bond_parm_tbl arp_validate_tbl[] = {
|
|
{ "none", BOND_ARP_VALIDATE_NONE},
|
|
{ "active", BOND_ARP_VALIDATE_ACTIVE},
|
|
{ "backup", BOND_ARP_VALIDATE_BACKUP},
|
|
{ "all", BOND_ARP_VALIDATE_ALL},
|
|
{ NULL, -1},
|
|
};
|
|
|
|
const struct bond_parm_tbl fail_over_mac_tbl[] = {
|
|
{ "none", BOND_FOM_NONE},
|
|
{ "active", BOND_FOM_ACTIVE},
|
|
{ "follow", BOND_FOM_FOLLOW},
|
|
{ NULL, -1},
|
|
};
|
|
|
|
const struct bond_parm_tbl pri_reselect_tbl[] = {
|
|
{ "always", BOND_PRI_RESELECT_ALWAYS},
|
|
{ "better", BOND_PRI_RESELECT_BETTER},
|
|
{ "failure", BOND_PRI_RESELECT_FAILURE},
|
|
{ NULL, -1},
|
|
};
|
|
|
|
struct bond_parm_tbl ad_select_tbl[] = {
|
|
{ "stable", BOND_AD_STABLE},
|
|
{ "bandwidth", BOND_AD_BANDWIDTH},
|
|
{ "count", BOND_AD_COUNT},
|
|
{ NULL, -1},
|
|
};
|
|
|
|
/*-------------------------- Forward declarations ---------------------------*/
|
|
|
|
static int bond_init(struct net_device *bond_dev);
|
|
static void bond_uninit(struct net_device *bond_dev);
|
|
|
|
/*---------------------------- General routines -----------------------------*/
|
|
|
|
const char *bond_mode_name(int mode)
|
|
{
|
|
static const char *names[] = {
|
|
[BOND_MODE_ROUNDROBIN] = "load balancing (round-robin)",
|
|
[BOND_MODE_ACTIVEBACKUP] = "fault-tolerance (active-backup)",
|
|
[BOND_MODE_XOR] = "load balancing (xor)",
|
|
[BOND_MODE_BROADCAST] = "fault-tolerance (broadcast)",
|
|
[BOND_MODE_8023AD] = "IEEE 802.3ad Dynamic link aggregation",
|
|
[BOND_MODE_TLB] = "transmit load balancing",
|
|
[BOND_MODE_ALB] = "adaptive load balancing",
|
|
};
|
|
|
|
if (mode < 0 || mode > BOND_MODE_ALB)
|
|
return "unknown";
|
|
|
|
return names[mode];
|
|
}
|
|
|
|
/*---------------------------------- VLAN -----------------------------------*/
|
|
|
|
/**
|
|
* bond_add_vlan - add a new vlan id on bond
|
|
* @bond: bond that got the notification
|
|
* @vlan_id: the vlan id to add
|
|
*
|
|
* Returns -ENOMEM if allocation failed.
|
|
*/
|
|
static int bond_add_vlan(struct bonding *bond, unsigned short vlan_id)
|
|
{
|
|
struct vlan_entry *vlan;
|
|
|
|
pr_debug("bond: %s, vlan id %d\n",
|
|
(bond ? bond->dev->name : "None"), vlan_id);
|
|
|
|
vlan = kzalloc(sizeof(struct vlan_entry), GFP_KERNEL);
|
|
if (!vlan)
|
|
return -ENOMEM;
|
|
|
|
INIT_LIST_HEAD(&vlan->vlan_list);
|
|
vlan->vlan_id = vlan_id;
|
|
|
|
write_lock_bh(&bond->lock);
|
|
|
|
list_add_tail(&vlan->vlan_list, &bond->vlan_list);
|
|
|
|
write_unlock_bh(&bond->lock);
|
|
|
|
pr_debug("added VLAN ID %d on bond %s\n", vlan_id, bond->dev->name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* bond_del_vlan - delete a vlan id from bond
|
|
* @bond: bond that got the notification
|
|
* @vlan_id: the vlan id to delete
|
|
*
|
|
* returns -ENODEV if @vlan_id was not found in @bond.
|
|
*/
|
|
static int bond_del_vlan(struct bonding *bond, unsigned short vlan_id)
|
|
{
|
|
struct vlan_entry *vlan;
|
|
int res = -ENODEV;
|
|
|
|
pr_debug("bond: %s, vlan id %d\n", bond->dev->name, vlan_id);
|
|
|
|
block_netpoll_tx();
|
|
write_lock_bh(&bond->lock);
|
|
|
|
list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
|
|
if (vlan->vlan_id == vlan_id) {
|
|
list_del(&vlan->vlan_list);
|
|
|
|
if (bond_is_lb(bond))
|
|
bond_alb_clear_vlan(bond, vlan_id);
|
|
|
|
pr_debug("removed VLAN ID %d from bond %s\n",
|
|
vlan_id, bond->dev->name);
|
|
|
|
kfree(vlan);
|
|
|
|
res = 0;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
pr_debug("couldn't find VLAN ID %d in bond %s\n",
|
|
vlan_id, bond->dev->name);
|
|
|
|
out:
|
|
write_unlock_bh(&bond->lock);
|
|
unblock_netpoll_tx();
|
|
return res;
|
|
}
|
|
|
|
/**
|
|
* bond_next_vlan - safely skip to the next item in the vlans list.
|
|
* @bond: the bond we're working on
|
|
* @curr: item we're advancing from
|
|
*
|
|
* Returns %NULL if list is empty, bond->next_vlan if @curr is %NULL,
|
|
* or @curr->next otherwise (even if it is @curr itself again).
|
|
*
|
|
* Caller must hold bond->lock
|
|
*/
|
|
struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr)
|
|
{
|
|
struct vlan_entry *next, *last;
|
|
|
|
if (list_empty(&bond->vlan_list))
|
|
return NULL;
|
|
|
|
if (!curr) {
|
|
next = list_entry(bond->vlan_list.next,
|
|
struct vlan_entry, vlan_list);
|
|
} else {
|
|
last = list_entry(bond->vlan_list.prev,
|
|
struct vlan_entry, vlan_list);
|
|
if (last == curr) {
|
|
next = list_entry(bond->vlan_list.next,
|
|
struct vlan_entry, vlan_list);
|
|
} else {
|
|
next = list_entry(curr->vlan_list.next,
|
|
struct vlan_entry, vlan_list);
|
|
}
|
|
}
|
|
|
|
return next;
|
|
}
|
|
|
|
#define bond_queue_mapping(skb) (*(u16 *)((skb)->cb))
|
|
|
|
/**
|
|
* bond_dev_queue_xmit - Prepare skb for xmit.
|
|
*
|
|
* @bond: bond device that got this skb for tx.
|
|
* @skb: hw accel VLAN tagged skb to transmit
|
|
* @slave_dev: slave that is supposed to xmit this skbuff
|
|
*/
|
|
int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb,
|
|
struct net_device *slave_dev)
|
|
{
|
|
skb->dev = slave_dev;
|
|
|
|
skb->queue_mapping = bond_queue_mapping(skb);
|
|
|
|
if (unlikely(netpoll_tx_running(slave_dev)))
|
|
bond_netpoll_send_skb(bond_get_slave_by_dev(bond, slave_dev), skb);
|
|
else
|
|
dev_queue_xmit(skb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* In the following 2 functions, bond_vlan_rx_add_vid and bond_vlan_rx_kill_vid,
|
|
* We don't protect the slave list iteration with a lock because:
|
|
* a. This operation is performed in IOCTL context,
|
|
* b. The operation is protected by the RTNL semaphore in the 8021q code,
|
|
* c. Holding a lock with BH disabled while directly calling a base driver
|
|
* entry point is generally a BAD idea.
|
|
*
|
|
* The design of synchronization/protection for this operation in the 8021q
|
|
* module is good for one or more VLAN devices over a single physical device
|
|
* and cannot be extended for a teaming solution like bonding, so there is a
|
|
* potential race condition here where a net device from the vlan group might
|
|
* be referenced (either by a base driver or the 8021q code) while it is being
|
|
* removed from the system. However, it turns out we're not making matters
|
|
* worse, and if it works for regular VLAN usage it will work here too.
|
|
*/
|
|
|
|
/**
|
|
* bond_vlan_rx_add_vid - Propagates adding an id to slaves
|
|
* @bond_dev: bonding net device that got called
|
|
* @vid: vlan id being added
|
|
*/
|
|
static void bond_vlan_rx_add_vid(struct net_device *bond_dev, uint16_t vid)
|
|
{
|
|
struct bonding *bond = netdev_priv(bond_dev);
|
|
struct slave *slave;
|
|
int i, res;
|
|
|
|
bond_for_each_slave(bond, slave, i) {
|
|
struct net_device *slave_dev = slave->dev;
|
|
const struct net_device_ops *slave_ops = slave_dev->netdev_ops;
|
|
|
|
if ((slave_dev->features & NETIF_F_HW_VLAN_FILTER) &&
|
|
slave_ops->ndo_vlan_rx_add_vid) {
|
|
slave_ops->ndo_vlan_rx_add_vid(slave_dev, vid);
|
|
}
|
|
}
|
|
|
|
res = bond_add_vlan(bond, vid);
|
|
if (res) {
|
|
pr_err("%s: Error: Failed to add vlan id %d\n",
|
|
bond_dev->name, vid);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* bond_vlan_rx_kill_vid - Propagates deleting an id to slaves
|
|
* @bond_dev: bonding net device that got called
|
|
* @vid: vlan id being removed
|
|
*/
|
|
static void bond_vlan_rx_kill_vid(struct net_device *bond_dev, uint16_t vid)
|
|
{
|
|
struct bonding *bond = netdev_priv(bond_dev);
|
|
struct slave *slave;
|
|
int i, res;
|
|
|
|
bond_for_each_slave(bond, slave, i) {
|
|
struct net_device *slave_dev = slave->dev;
|
|
const struct net_device_ops *slave_ops = slave_dev->netdev_ops;
|
|
|
|
if ((slave_dev->features & NETIF_F_HW_VLAN_FILTER) &&
|
|
slave_ops->ndo_vlan_rx_kill_vid) {
|
|
slave_ops->ndo_vlan_rx_kill_vid(slave_dev, vid);
|
|
}
|
|
}
|
|
|
|
res = bond_del_vlan(bond, vid);
|
|
if (res) {
|
|
pr_err("%s: Error: Failed to remove vlan id %d\n",
|
|
bond_dev->name, vid);
|
|
}
|
|
}
|
|
|
|
static void bond_add_vlans_on_slave(struct bonding *bond, struct net_device *slave_dev)
|
|
{
|
|
struct vlan_entry *vlan;
|
|
const struct net_device_ops *slave_ops = slave_dev->netdev_ops;
|
|
|
|
if (!(slave_dev->features & NETIF_F_HW_VLAN_FILTER) ||
|
|
!(slave_ops->ndo_vlan_rx_add_vid))
|
|
return;
|
|
|
|
list_for_each_entry(vlan, &bond->vlan_list, vlan_list)
|
|
slave_ops->ndo_vlan_rx_add_vid(slave_dev, vlan->vlan_id);
|
|
}
|
|
|
|
static void bond_del_vlans_from_slave(struct bonding *bond,
|
|
struct net_device *slave_dev)
|
|
{
|
|
const struct net_device_ops *slave_ops = slave_dev->netdev_ops;
|
|
struct vlan_entry *vlan;
|
|
|
|
if (!(slave_dev->features & NETIF_F_HW_VLAN_FILTER) ||
|
|
!(slave_ops->ndo_vlan_rx_kill_vid))
|
|
return;
|
|
|
|
list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
|
|
if (!vlan->vlan_id)
|
|
continue;
|
|
slave_ops->ndo_vlan_rx_kill_vid(slave_dev, vlan->vlan_id);
|
|
}
|
|
}
|
|
|
|
/*------------------------------- Link status -------------------------------*/
|
|
|
|
/*
|
|
* Set the carrier state for the master according to the state of its
|
|
* slaves. If any slaves are up, the master is up. In 802.3ad mode,
|
|
* do special 802.3ad magic.
|
|
*
|
|
* Returns zero if carrier state does not change, nonzero if it does.
|
|
*/
|
|
static int bond_set_carrier(struct bonding *bond)
|
|
{
|
|
struct slave *slave;
|
|
int i;
|
|
|
|
if (bond->slave_cnt == 0)
|
|
goto down;
|
|
|
|
if (bond->params.mode == BOND_MODE_8023AD)
|
|
return bond_3ad_set_carrier(bond);
|
|
|
|
bond_for_each_slave(bond, slave, i) {
|
|
if (slave->link == BOND_LINK_UP) {
|
|
if (!netif_carrier_ok(bond->dev)) {
|
|
netif_carrier_on(bond->dev);
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
down:
|
|
if (netif_carrier_ok(bond->dev)) {
|
|
netif_carrier_off(bond->dev);
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Get link speed and duplex from the slave's base driver
|
|
* using ethtool. If for some reason the call fails or the
|
|
* values are invalid, set speed and duplex to -1,
|
|
* and return error.
|
|
*/
|
|
static int bond_update_speed_duplex(struct slave *slave)
|
|
{
|
|
struct net_device *slave_dev = slave->dev;
|
|
struct ethtool_cmd ecmd;
|
|
u32 slave_speed;
|
|
int res;
|
|
|
|
slave->speed = -1;
|
|
slave->duplex = -1;
|
|
|
|
res = __ethtool_get_settings(slave_dev, &ecmd);
|
|
if (res < 0)
|
|
return -1;
|
|
|
|
slave_speed = ethtool_cmd_speed(&ecmd);
|
|
if (slave_speed == 0 || slave_speed == ((__u32) -1))
|
|
return -1;
|
|
|
|
switch (ecmd.duplex) {
|
|
case DUPLEX_FULL:
|
|
case DUPLEX_HALF:
|
|
break;
|
|
default:
|
|
return -1;
|
|
}
|
|
|
|
slave->speed = slave_speed;
|
|
slave->duplex = ecmd.duplex;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* if <dev> supports MII link status reporting, check its link status.
|
|
*
|
|
* We either do MII/ETHTOOL ioctls, or check netif_carrier_ok(),
|
|
* depending upon the setting of the use_carrier parameter.
|
|
*
|
|
* Return either BMSR_LSTATUS, meaning that the link is up (or we
|
|
* can't tell and just pretend it is), or 0, meaning that the link is
|
|
* down.
|
|
*
|
|
* If reporting is non-zero, instead of faking link up, return -1 if
|
|
* both ETHTOOL and MII ioctls fail (meaning the device does not
|
|
* support them). If use_carrier is set, return whatever it says.
|
|
* It'd be nice if there was a good way to tell if a driver supports
|
|
* netif_carrier, but there really isn't.
|
|
*/
|
|
static int bond_check_dev_link(struct bonding *bond,
|
|
struct net_device *slave_dev, int reporting)
|
|
{
|
|
const struct net_device_ops *slave_ops = slave_dev->netdev_ops;
|
|
int (*ioctl)(struct net_device *, struct ifreq *, int);
|
|
struct ifreq ifr;
|
|
struct mii_ioctl_data *mii;
|
|
|
|
if (!reporting && !netif_running(slave_dev))
|
|
return 0;
|
|
|
|
if (bond->params.use_carrier)
|
|
return netif_carrier_ok(slave_dev) ? BMSR_LSTATUS : 0;
|
|
|
|
/* Try to get link status using Ethtool first. */
|
|
if (slave_dev->ethtool_ops) {
|
|
if (slave_dev->ethtool_ops->get_link) {
|
|
u32 link;
|
|
|
|
link = slave_dev->ethtool_ops->get_link(slave_dev);
|
|
|
|
return link ? BMSR_LSTATUS : 0;
|
|
}
|
|
}
|
|
|
|
/* Ethtool can't be used, fallback to MII ioctls. */
|
|
ioctl = slave_ops->ndo_do_ioctl;
|
|
if (ioctl) {
|
|
/* TODO: set pointer to correct ioctl on a per team member */
|
|
/* bases to make this more efficient. that is, once */
|
|
/* we determine the correct ioctl, we will always */
|
|
/* call it and not the others for that team */
|
|
/* member. */
|
|
|
|
/*
|
|
* We cannot assume that SIOCGMIIPHY will also read a
|
|
* register; not all network drivers (e.g., e100)
|
|
* support that.
|
|
*/
|
|
|
|
/* Yes, the mii is overlaid on the ifreq.ifr_ifru */
|
|
strncpy(ifr.ifr_name, slave_dev->name, IFNAMSIZ);
|
|
mii = if_mii(&ifr);
|
|
if (IOCTL(slave_dev, &ifr, SIOCGMIIPHY) == 0) {
|
|
mii->reg_num = MII_BMSR;
|
|
if (IOCTL(slave_dev, &ifr, SIOCGMIIREG) == 0)
|
|
return mii->val_out & BMSR_LSTATUS;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* If reporting, report that either there's no dev->do_ioctl,
|
|
* or both SIOCGMIIREG and get_link failed (meaning that we
|
|
* cannot report link status). If not reporting, pretend
|
|
* we're ok.
|
|
*/
|
|
return reporting ? -1 : BMSR_LSTATUS;
|
|
}
|
|
|
|
/*----------------------------- Multicast list ------------------------------*/
|
|
|
|
/*
|
|
* Push the promiscuity flag down to appropriate slaves
|
|
*/
|
|
static int bond_set_promiscuity(struct bonding *bond, int inc)
|
|
{
|
|
int err = 0;
|
|
if (USES_PRIMARY(bond->params.mode)) {
|
|
/* write lock already acquired */
|
|
if (bond->curr_active_slave) {
|
|
err = dev_set_promiscuity(bond->curr_active_slave->dev,
|
|
inc);
|
|
}
|
|
} else {
|
|
struct slave *slave;
|
|
int i;
|
|
bond_for_each_slave(bond, slave, i) {
|
|
err = dev_set_promiscuity(slave->dev, inc);
|
|
if (err)
|
|
return err;
|
|
}
|
|
}
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* Push the allmulti flag down to all slaves
|
|
*/
|
|
static int bond_set_allmulti(struct bonding *bond, int inc)
|
|
{
|
|
int err = 0;
|
|
if (USES_PRIMARY(bond->params.mode)) {
|
|
/* write lock already acquired */
|
|
if (bond->curr_active_slave) {
|
|
err = dev_set_allmulti(bond->curr_active_slave->dev,
|
|
inc);
|
|
}
|
|
} else {
|
|
struct slave *slave;
|
|
int i;
|
|
bond_for_each_slave(bond, slave, i) {
|
|
err = dev_set_allmulti(slave->dev, inc);
|
|
if (err)
|
|
return err;
|
|
}
|
|
}
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* Add a Multicast address to slaves
|
|
* according to mode
|
|
*/
|
|
static void bond_mc_add(struct bonding *bond, void *addr)
|
|
{
|
|
if (USES_PRIMARY(bond->params.mode)) {
|
|
/* write lock already acquired */
|
|
if (bond->curr_active_slave)
|
|
dev_mc_add(bond->curr_active_slave->dev, addr);
|
|
} else {
|
|
struct slave *slave;
|
|
int i;
|
|
|
|
bond_for_each_slave(bond, slave, i)
|
|
dev_mc_add(slave->dev, addr);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Remove a multicast address from slave
|
|
* according to mode
|
|
*/
|
|
static void bond_mc_del(struct bonding *bond, void *addr)
|
|
{
|
|
if (USES_PRIMARY(bond->params.mode)) {
|
|
/* write lock already acquired */
|
|
if (bond->curr_active_slave)
|
|
dev_mc_del(bond->curr_active_slave->dev, addr);
|
|
} else {
|
|
struct slave *slave;
|
|
int i;
|
|
bond_for_each_slave(bond, slave, i) {
|
|
dev_mc_del(slave->dev, addr);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
static void __bond_resend_igmp_join_requests(struct net_device *dev)
|
|
{
|
|
struct in_device *in_dev;
|
|
|
|
rcu_read_lock();
|
|
in_dev = __in_dev_get_rcu(dev);
|
|
if (in_dev)
|
|
ip_mc_rejoin_groups(in_dev);
|
|
rcu_read_unlock();
|
|
}
|
|
|
|
/*
|
|
* Retrieve the list of registered multicast addresses for the bonding
|
|
* device and retransmit an IGMP JOIN request to the current active
|
|
* slave.
|
|
*/
|
|
static void bond_resend_igmp_join_requests(struct bonding *bond)
|
|
{
|
|
struct net_device *vlan_dev;
|
|
struct vlan_entry *vlan;
|
|
|
|
read_lock(&bond->lock);
|
|
|
|
/* rejoin all groups on bond device */
|
|
__bond_resend_igmp_join_requests(bond->dev);
|
|
|
|
/* rejoin all groups on vlan devices */
|
|
list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
|
|
rcu_read_lock();
|
|
vlan_dev = __vlan_find_dev_deep(bond->dev,
|
|
vlan->vlan_id);
|
|
rcu_read_unlock();
|
|
if (vlan_dev)
|
|
__bond_resend_igmp_join_requests(vlan_dev);
|
|
}
|
|
|
|
if (--bond->igmp_retrans > 0)
|
|
queue_delayed_work(bond->wq, &bond->mcast_work, HZ/5);
|
|
|
|
read_unlock(&bond->lock);
|
|
}
|
|
|
|
static void bond_resend_igmp_join_requests_delayed(struct work_struct *work)
|
|
{
|
|
struct bonding *bond = container_of(work, struct bonding,
|
|
mcast_work.work);
|
|
bond_resend_igmp_join_requests(bond);
|
|
}
|
|
|
|
/*
|
|
* flush all members of flush->mc_list from device dev->mc_list
|
|
*/
|
|
static void bond_mc_list_flush(struct net_device *bond_dev,
|
|
struct net_device *slave_dev)
|
|
{
|
|
struct bonding *bond = netdev_priv(bond_dev);
|
|
struct netdev_hw_addr *ha;
|
|
|
|
netdev_for_each_mc_addr(ha, bond_dev)
|
|
dev_mc_del(slave_dev, ha->addr);
|
|
|
|
if (bond->params.mode == BOND_MODE_8023AD) {
|
|
/* del lacpdu mc addr from mc list */
|
|
u8 lacpdu_multicast[ETH_ALEN] = MULTICAST_LACPDU_ADDR;
|
|
|
|
dev_mc_del(slave_dev, lacpdu_multicast);
|
|
}
|
|
}
|
|
|
|
/*--------------------------- Active slave change ---------------------------*/
|
|
|
|
/*
|
|
* Update the mc list and multicast-related flags for the new and
|
|
* old active slaves (if any) according to the multicast mode, and
|
|
* promiscuous flags unconditionally.
|
|
*/
|
|
static void bond_mc_swap(struct bonding *bond, struct slave *new_active,
|
|
struct slave *old_active)
|
|
{
|
|
struct netdev_hw_addr *ha;
|
|
|
|
if (!USES_PRIMARY(bond->params.mode))
|
|
/* nothing to do - mc list is already up-to-date on
|
|
* all slaves
|
|
*/
|
|
return;
|
|
|
|
if (old_active) {
|
|
if (bond->dev->flags & IFF_PROMISC)
|
|
dev_set_promiscuity(old_active->dev, -1);
|
|
|
|
if (bond->dev->flags & IFF_ALLMULTI)
|
|
dev_set_allmulti(old_active->dev, -1);
|
|
|
|
netdev_for_each_mc_addr(ha, bond->dev)
|
|
dev_mc_del(old_active->dev, ha->addr);
|
|
}
|
|
|
|
if (new_active) {
|
|
/* FIXME: Signal errors upstream. */
|
|
if (bond->dev->flags & IFF_PROMISC)
|
|
dev_set_promiscuity(new_active->dev, 1);
|
|
|
|
if (bond->dev->flags & IFF_ALLMULTI)
|
|
dev_set_allmulti(new_active->dev, 1);
|
|
|
|
netdev_for_each_mc_addr(ha, bond->dev)
|
|
dev_mc_add(new_active->dev, ha->addr);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* bond_do_fail_over_mac
|
|
*
|
|
* Perform special MAC address swapping for fail_over_mac settings
|
|
*
|
|
* Called with RTNL, bond->lock for read, curr_slave_lock for write_bh.
|
|
*/
|
|
static void bond_do_fail_over_mac(struct bonding *bond,
|
|
struct slave *new_active,
|
|
struct slave *old_active)
|
|
__releases(&bond->curr_slave_lock)
|
|
__releases(&bond->lock)
|
|
__acquires(&bond->lock)
|
|
__acquires(&bond->curr_slave_lock)
|
|
{
|
|
u8 tmp_mac[ETH_ALEN];
|
|
struct sockaddr saddr;
|
|
int rv;
|
|
|
|
switch (bond->params.fail_over_mac) {
|
|
case BOND_FOM_ACTIVE:
|
|
if (new_active)
|
|
memcpy(bond->dev->dev_addr, new_active->dev->dev_addr,
|
|
new_active->dev->addr_len);
|
|
break;
|
|
case BOND_FOM_FOLLOW:
|
|
/*
|
|
* if new_active && old_active, swap them
|
|
* if just old_active, do nothing (going to no active slave)
|
|
* if just new_active, set new_active to bond's MAC
|
|
*/
|
|
if (!new_active)
|
|
return;
|
|
|
|
write_unlock_bh(&bond->curr_slave_lock);
|
|
read_unlock(&bond->lock);
|
|
|
|
if (old_active) {
|
|
memcpy(tmp_mac, new_active->dev->dev_addr, ETH_ALEN);
|
|
memcpy(saddr.sa_data, old_active->dev->dev_addr,
|
|
ETH_ALEN);
|
|
saddr.sa_family = new_active->dev->type;
|
|
} else {
|
|
memcpy(saddr.sa_data, bond->dev->dev_addr, ETH_ALEN);
|
|
saddr.sa_family = bond->dev->type;
|
|
}
|
|
|
|
rv = dev_set_mac_address(new_active->dev, &saddr);
|
|
if (rv) {
|
|
pr_err("%s: Error %d setting MAC of slave %s\n",
|
|
bond->dev->name, -rv, new_active->dev->name);
|
|
goto out;
|
|
}
|
|
|
|
if (!old_active)
|
|
goto out;
|
|
|
|
memcpy(saddr.sa_data, tmp_mac, ETH_ALEN);
|
|
saddr.sa_family = old_active->dev->type;
|
|
|
|
rv = dev_set_mac_address(old_active->dev, &saddr);
|
|
if (rv)
|
|
pr_err("%s: Error %d setting MAC of slave %s\n",
|
|
bond->dev->name, -rv, new_active->dev->name);
|
|
out:
|
|
read_lock(&bond->lock);
|
|
write_lock_bh(&bond->curr_slave_lock);
|
|
break;
|
|
default:
|
|
pr_err("%s: bond_do_fail_over_mac impossible: bad policy %d\n",
|
|
bond->dev->name, bond->params.fail_over_mac);
|
|
break;
|
|
}
|
|
|
|
}
|
|
|
|
static bool bond_should_change_active(struct bonding *bond)
|
|
{
|
|
struct slave *prim = bond->primary_slave;
|
|
struct slave *curr = bond->curr_active_slave;
|
|
|
|
if (!prim || !curr || curr->link != BOND_LINK_UP)
|
|
return true;
|
|
if (bond->force_primary) {
|
|
bond->force_primary = false;
|
|
return true;
|
|
}
|
|
if (bond->params.primary_reselect == BOND_PRI_RESELECT_BETTER &&
|
|
(prim->speed < curr->speed ||
|
|
(prim->speed == curr->speed && prim->duplex <= curr->duplex)))
|
|
return false;
|
|
if (bond->params.primary_reselect == BOND_PRI_RESELECT_FAILURE)
|
|
return false;
|
|
return true;
|
|
}
|
|
|
|
/**
|
|
* find_best_interface - select the best available slave to be the active one
|
|
* @bond: our bonding struct
|
|
*
|
|
* Warning: Caller must hold curr_slave_lock for writing.
|
|
*/
|
|
static struct slave *bond_find_best_slave(struct bonding *bond)
|
|
{
|
|
struct slave *new_active, *old_active;
|
|
struct slave *bestslave = NULL;
|
|
int mintime = bond->params.updelay;
|
|
int i;
|
|
|
|
new_active = bond->curr_active_slave;
|
|
|
|
if (!new_active) { /* there were no active slaves left */
|
|
if (bond->slave_cnt > 0) /* found one slave */
|
|
new_active = bond->first_slave;
|
|
else
|
|
return NULL; /* still no slave, return NULL */
|
|
}
|
|
|
|
if ((bond->primary_slave) &&
|
|
bond->primary_slave->link == BOND_LINK_UP &&
|
|
bond_should_change_active(bond)) {
|
|
new_active = bond->primary_slave;
|
|
}
|
|
|
|
/* remember where to stop iterating over the slaves */
|
|
old_active = new_active;
|
|
|
|
bond_for_each_slave_from(bond, new_active, i, old_active) {
|
|
if (new_active->link == BOND_LINK_UP) {
|
|
return new_active;
|
|
} else if (new_active->link == BOND_LINK_BACK &&
|
|
IS_UP(new_active->dev)) {
|
|
/* link up, but waiting for stabilization */
|
|
if (new_active->delay < mintime) {
|
|
mintime = new_active->delay;
|
|
bestslave = new_active;
|
|
}
|
|
}
|
|
}
|
|
|
|
return bestslave;
|
|
}
|
|
|
|
static bool bond_should_notify_peers(struct bonding *bond)
|
|
{
|
|
struct slave *slave = bond->curr_active_slave;
|
|
|
|
pr_debug("bond_should_notify_peers: bond %s slave %s\n",
|
|
bond->dev->name, slave ? slave->dev->name : "NULL");
|
|
|
|
if (!slave || !bond->send_peer_notif ||
|
|
test_bit(__LINK_STATE_LINKWATCH_PENDING, &slave->dev->state))
|
|
return false;
|
|
|
|
bond->send_peer_notif--;
|
|
return true;
|
|
}
|
|
|
|
/**
|
|
* change_active_interface - change the active slave into the specified one
|
|
* @bond: our bonding struct
|
|
* @new: the new slave to make the active one
|
|
*
|
|
* Set the new slave to the bond's settings and unset them on the old
|
|
* curr_active_slave.
|
|
* Setting include flags, mc-list, promiscuity, allmulti, etc.
|
|
*
|
|
* If @new's link state is %BOND_LINK_BACK we'll set it to %BOND_LINK_UP,
|
|
* because it is apparently the best available slave we have, even though its
|
|
* updelay hasn't timed out yet.
|
|
*
|
|
* If new_active is not NULL, caller must hold bond->lock for read and
|
|
* curr_slave_lock for write_bh.
|
|
*/
|
|
void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
|
|
{
|
|
struct slave *old_active = bond->curr_active_slave;
|
|
|
|
if (old_active == new_active)
|
|
return;
|
|
|
|
if (new_active) {
|
|
new_active->jiffies = jiffies;
|
|
|
|
if (new_active->link == BOND_LINK_BACK) {
|
|
if (USES_PRIMARY(bond->params.mode)) {
|
|
pr_info("%s: making interface %s the new active one %d ms earlier.\n",
|
|
bond->dev->name, new_active->dev->name,
|
|
(bond->params.updelay - new_active->delay) * bond->params.miimon);
|
|
}
|
|
|
|
new_active->delay = 0;
|
|
new_active->link = BOND_LINK_UP;
|
|
|
|
if (bond->params.mode == BOND_MODE_8023AD)
|
|
bond_3ad_handle_link_change(new_active, BOND_LINK_UP);
|
|
|
|
if (bond_is_lb(bond))
|
|
bond_alb_handle_link_change(bond, new_active, BOND_LINK_UP);
|
|
} else {
|
|
if (USES_PRIMARY(bond->params.mode)) {
|
|
pr_info("%s: making interface %s the new active one.\n",
|
|
bond->dev->name, new_active->dev->name);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (USES_PRIMARY(bond->params.mode))
|
|
bond_mc_swap(bond, new_active, old_active);
|
|
|
|
if (bond_is_lb(bond)) {
|
|
bond_alb_handle_active_change(bond, new_active);
|
|
if (old_active)
|
|
bond_set_slave_inactive_flags(old_active);
|
|
if (new_active)
|
|
bond_set_slave_active_flags(new_active);
|
|
} else {
|
|
bond->curr_active_slave = new_active;
|
|
}
|
|
|
|
if (bond->params.mode == BOND_MODE_ACTIVEBACKUP) {
|
|
if (old_active)
|
|
bond_set_slave_inactive_flags(old_active);
|
|
|
|
if (new_active) {
|
|
bool should_notify_peers = false;
|
|
|
|
bond_set_slave_active_flags(new_active);
|
|
|
|
if (bond->params.fail_over_mac)
|
|
bond_do_fail_over_mac(bond, new_active,
|
|
old_active);
|
|
|
|
if (netif_running(bond->dev)) {
|
|
bond->send_peer_notif =
|
|
bond->params.num_peer_notif;
|
|
should_notify_peers =
|
|
bond_should_notify_peers(bond);
|
|
}
|
|
|
|
write_unlock_bh(&bond->curr_slave_lock);
|
|
read_unlock(&bond->lock);
|
|
|
|
netdev_bonding_change(bond->dev, NETDEV_BONDING_FAILOVER);
|
|
if (should_notify_peers)
|
|
netdev_bonding_change(bond->dev,
|
|
NETDEV_NOTIFY_PEERS);
|
|
|
|
read_lock(&bond->lock);
|
|
write_lock_bh(&bond->curr_slave_lock);
|
|
}
|
|
}
|
|
|
|
/* resend IGMP joins since active slave has changed or
|
|
* all were sent on curr_active_slave.
|
|
* resend only if bond is brought up with the affected
|
|
* bonding modes and the retransmission is enabled */
|
|
if (netif_running(bond->dev) && (bond->params.resend_igmp > 0) &&
|
|
((USES_PRIMARY(bond->params.mode) && new_active) ||
|
|
bond->params.mode == BOND_MODE_ROUNDROBIN)) {
|
|
bond->igmp_retrans = bond->params.resend_igmp;
|
|
queue_delayed_work(bond->wq, &bond->mcast_work, 0);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* bond_select_active_slave - select a new active slave, if needed
|
|
* @bond: our bonding struct
|
|
*
|
|
* This functions should be called when one of the following occurs:
|
|
* - The old curr_active_slave has been released or lost its link.
|
|
* - The primary_slave has got its link back.
|
|
* - A slave has got its link back and there's no old curr_active_slave.
|
|
*
|
|
* Caller must hold bond->lock for read and curr_slave_lock for write_bh.
|
|
*/
|
|
void bond_select_active_slave(struct bonding *bond)
|
|
{
|
|
struct slave *best_slave;
|
|
int rv;
|
|
|
|
best_slave = bond_find_best_slave(bond);
|
|
if (best_slave != bond->curr_active_slave) {
|
|
bond_change_active_slave(bond, best_slave);
|
|
rv = bond_set_carrier(bond);
|
|
if (!rv)
|
|
return;
|
|
|
|
if (netif_carrier_ok(bond->dev)) {
|
|
pr_info("%s: first active interface up!\n",
|
|
bond->dev->name);
|
|
} else {
|
|
pr_info("%s: now running without any active interface !\n",
|
|
bond->dev->name);
|
|
}
|
|
}
|
|
}
|
|
|
|
/*--------------------------- slave list handling ---------------------------*/
|
|
|
|
/*
|
|
* This function attaches the slave to the end of list.
|
|
*
|
|
* bond->lock held for writing by caller.
|
|
*/
|
|
static void bond_attach_slave(struct bonding *bond, struct slave *new_slave)
|
|
{
|
|
if (bond->first_slave == NULL) { /* attaching the first slave */
|
|
new_slave->next = new_slave;
|
|
new_slave->prev = new_slave;
|
|
bond->first_slave = new_slave;
|
|
} else {
|
|
new_slave->next = bond->first_slave;
|
|
new_slave->prev = bond->first_slave->prev;
|
|
new_slave->next->prev = new_slave;
|
|
new_slave->prev->next = new_slave;
|
|
}
|
|
|
|
bond->slave_cnt++;
|
|
}
|
|
|
|
/*
|
|
* This function detaches the slave from the list.
|
|
* WARNING: no check is made to verify if the slave effectively
|
|
* belongs to <bond>.
|
|
* Nothing is freed on return, structures are just unchained.
|
|
* If any slave pointer in bond was pointing to <slave>,
|
|
* it should be changed by the calling function.
|
|
*
|
|
* bond->lock held for writing by caller.
|
|
*/
|
|
static void bond_detach_slave(struct bonding *bond, struct slave *slave)
|
|
{
|
|
if (slave->next)
|
|
slave->next->prev = slave->prev;
|
|
|
|
if (slave->prev)
|
|
slave->prev->next = slave->next;
|
|
|
|
if (bond->first_slave == slave) { /* slave is the first slave */
|
|
if (bond->slave_cnt > 1) { /* there are more slave */
|
|
bond->first_slave = slave->next;
|
|
} else {
|
|
bond->first_slave = NULL; /* slave was the last one */
|
|
}
|
|
}
|
|
|
|
slave->next = NULL;
|
|
slave->prev = NULL;
|
|
bond->slave_cnt--;
|
|
}
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
static inline int slave_enable_netpoll(struct slave *slave)
|
|
{
|
|
struct netpoll *np;
|
|
int err = 0;
|
|
|
|
np = kzalloc(sizeof(*np), GFP_KERNEL);
|
|
err = -ENOMEM;
|
|
if (!np)
|
|
goto out;
|
|
|
|
np->dev = slave->dev;
|
|
strlcpy(np->dev_name, slave->dev->name, IFNAMSIZ);
|
|
err = __netpoll_setup(np);
|
|
if (err) {
|
|
kfree(np);
|
|
goto out;
|
|
}
|
|
slave->np = np;
|
|
out:
|
|
return err;
|
|
}
|
|
static inline void slave_disable_netpoll(struct slave *slave)
|
|
{
|
|
struct netpoll *np = slave->np;
|
|
|
|
if (!np)
|
|
return;
|
|
|
|
slave->np = NULL;
|
|
synchronize_rcu_bh();
|
|
__netpoll_cleanup(np);
|
|
kfree(np);
|
|
}
|
|
static inline bool slave_dev_support_netpoll(struct net_device *slave_dev)
|
|
{
|
|
if (slave_dev->priv_flags & IFF_DISABLE_NETPOLL)
|
|
return false;
|
|
if (!slave_dev->netdev_ops->ndo_poll_controller)
|
|
return false;
|
|
return true;
|
|
}
|
|
|
|
static void bond_poll_controller(struct net_device *bond_dev)
|
|
{
|
|
}
|
|
|
|
static void __bond_netpoll_cleanup(struct bonding *bond)
|
|
{
|
|
struct slave *slave;
|
|
int i;
|
|
|
|
bond_for_each_slave(bond, slave, i)
|
|
if (IS_UP(slave->dev))
|
|
slave_disable_netpoll(slave);
|
|
}
|
|
static void bond_netpoll_cleanup(struct net_device *bond_dev)
|
|
{
|
|
struct bonding *bond = netdev_priv(bond_dev);
|
|
|
|
read_lock(&bond->lock);
|
|
__bond_netpoll_cleanup(bond);
|
|
read_unlock(&bond->lock);
|
|
}
|
|
|
|
static int bond_netpoll_setup(struct net_device *dev, struct netpoll_info *ni)
|
|
{
|
|
struct bonding *bond = netdev_priv(dev);
|
|
struct slave *slave;
|
|
int i, err = 0;
|
|
|
|
read_lock(&bond->lock);
|
|
bond_for_each_slave(bond, slave, i) {
|
|
err = slave_enable_netpoll(slave);
|
|
if (err) {
|
|
__bond_netpoll_cleanup(bond);
|
|
break;
|
|
}
|
|
}
|
|
read_unlock(&bond->lock);
|
|
return err;
|
|
}
|
|
|
|
static struct netpoll_info *bond_netpoll_info(struct bonding *bond)
|
|
{
|
|
return bond->dev->npinfo;
|
|
}
|
|
|
|
#else
|
|
static inline int slave_enable_netpoll(struct slave *slave)
|
|
{
|
|
return 0;
|
|
}
|
|
static inline void slave_disable_netpoll(struct slave *slave)
|
|
{
|
|
}
|
|
static void bond_netpoll_cleanup(struct net_device *bond_dev)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
/*---------------------------------- IOCTL ----------------------------------*/
|
|
|
|
static int bond_sethwaddr(struct net_device *bond_dev,
|
|
struct net_device *slave_dev)
|
|
{
|
|
pr_debug("bond_dev=%p\n", bond_dev);
|
|
pr_debug("slave_dev=%p\n", slave_dev);
|
|
pr_debug("slave_dev->addr_len=%d\n", slave_dev->addr_len);
|
|
memcpy(bond_dev->dev_addr, slave_dev->dev_addr, slave_dev->addr_len);
|
|
return 0;
|
|
}
|
|
|
|
static u32 bond_fix_features(struct net_device *dev, u32 features)
|
|
{
|
|
struct slave *slave;
|
|
struct bonding *bond = netdev_priv(dev);
|
|
u32 mask;
|
|
int i;
|
|
|
|
read_lock(&bond->lock);
|
|
|
|
if (!bond->first_slave) {
|
|
/* Disable adding VLANs to empty bond. But why? --mq */
|
|
features |= NETIF_F_VLAN_CHALLENGED;
|
|
goto out;
|
|
}
|
|
|
|
mask = features;
|
|
features &= ~NETIF_F_ONE_FOR_ALL;
|
|
features |= NETIF_F_ALL_FOR_ALL;
|
|
|
|
bond_for_each_slave(bond, slave, i) {
|
|
features = netdev_increment_features(features,
|
|
slave->dev->features,
|
|
mask);
|
|
}
|
|
|
|
out:
|
|
read_unlock(&bond->lock);
|
|
return features;
|
|
}
|
|
|
|
#define BOND_VLAN_FEATURES (NETIF_F_ALL_CSUM | NETIF_F_SG | \
|
|
NETIF_F_FRAGLIST | NETIF_F_ALL_TSO | \
|
|
NETIF_F_HIGHDMA | NETIF_F_LRO)
|
|
|
|
static void bond_compute_features(struct bonding *bond)
|
|
{
|
|
struct slave *slave;
|
|
struct net_device *bond_dev = bond->dev;
|
|
u32 vlan_features = BOND_VLAN_FEATURES;
|
|
unsigned short max_hard_header_len = ETH_HLEN;
|
|
int i;
|
|
|
|
read_lock(&bond->lock);
|
|
|
|
if (!bond->first_slave)
|
|
goto done;
|
|
|
|
bond_for_each_slave(bond, slave, i) {
|
|
vlan_features = netdev_increment_features(vlan_features,
|
|
slave->dev->vlan_features, BOND_VLAN_FEATURES);
|
|
|
|
if (slave->dev->hard_header_len > max_hard_header_len)
|
|
max_hard_header_len = slave->dev->hard_header_len;
|
|
}
|
|
|
|
done:
|
|
bond_dev->vlan_features = vlan_features;
|
|
bond_dev->hard_header_len = max_hard_header_len;
|
|
|
|
read_unlock(&bond->lock);
|
|
|
|
netdev_change_features(bond_dev);
|
|
}
|
|
|
|
static void bond_setup_by_slave(struct net_device *bond_dev,
|
|
struct net_device *slave_dev)
|
|
{
|
|
struct bonding *bond = netdev_priv(bond_dev);
|
|
|
|
bond_dev->header_ops = slave_dev->header_ops;
|
|
|
|
bond_dev->type = slave_dev->type;
|
|
bond_dev->hard_header_len = slave_dev->hard_header_len;
|
|
bond_dev->addr_len = slave_dev->addr_len;
|
|
|
|
memcpy(bond_dev->broadcast, slave_dev->broadcast,
|
|
slave_dev->addr_len);
|
|
bond->setup_by_slave = 1;
|
|
}
|
|
|
|
/* On bonding slaves other than the currently active slave, suppress
|
|
* duplicates except for alb non-mcast/bcast.
|
|
*/
|
|
static bool bond_should_deliver_exact_match(struct sk_buff *skb,
|
|
struct slave *slave,
|
|
struct bonding *bond)
|
|
{
|
|
if (bond_is_slave_inactive(slave)) {
|
|
if (bond->params.mode == BOND_MODE_ALB &&
|
|
skb->pkt_type != PACKET_BROADCAST &&
|
|
skb->pkt_type != PACKET_MULTICAST)
|
|
return false;
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
static rx_handler_result_t bond_handle_frame(struct sk_buff **pskb)
|
|
{
|
|
struct sk_buff *skb = *pskb;
|
|
struct slave *slave;
|
|
struct bonding *bond;
|
|
void (*recv_probe)(struct sk_buff *, struct bonding *,
|
|
struct slave *);
|
|
|
|
skb = skb_share_check(skb, GFP_ATOMIC);
|
|
if (unlikely(!skb))
|
|
return RX_HANDLER_CONSUMED;
|
|
|
|
*pskb = skb;
|
|
|
|
slave = bond_slave_get_rcu(skb->dev);
|
|
bond = slave->bond;
|
|
|
|
if (bond->params.arp_interval)
|
|
slave->dev->last_rx = jiffies;
|
|
|
|
recv_probe = ACCESS_ONCE(bond->recv_probe);
|
|
if (recv_probe) {
|
|
struct sk_buff *nskb = skb_clone(skb, GFP_ATOMIC);
|
|
|
|
if (likely(nskb)) {
|
|
recv_probe(nskb, bond, slave);
|
|
dev_kfree_skb(nskb);
|
|
}
|
|
}
|
|
|
|
if (bond_should_deliver_exact_match(skb, slave, bond)) {
|
|
return RX_HANDLER_EXACT;
|
|
}
|
|
|
|
skb->dev = bond->dev;
|
|
|
|
if (bond->params.mode == BOND_MODE_ALB &&
|
|
bond->dev->priv_flags & IFF_BRIDGE_PORT &&
|
|
skb->pkt_type == PACKET_HOST) {
|
|
|
|
if (unlikely(skb_cow_head(skb,
|
|
skb->data - skb_mac_header(skb)))) {
|
|
kfree_skb(skb);
|
|
return RX_HANDLER_CONSUMED;
|
|
}
|
|
memcpy(eth_hdr(skb)->h_dest, bond->dev->dev_addr, ETH_ALEN);
|
|
}
|
|
|
|
return RX_HANDLER_ANOTHER;
|
|
}
|
|
|
|
/* enslave device <slave> to bond device <master> */
|
|
int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
|
|
{
|
|
struct bonding *bond = netdev_priv(bond_dev);
|
|
const struct net_device_ops *slave_ops = slave_dev->netdev_ops;
|
|
struct slave *new_slave = NULL;
|
|
struct netdev_hw_addr *ha;
|
|
struct sockaddr addr;
|
|
int link_reporting;
|
|
int res = 0;
|
|
|
|
if (!bond->params.use_carrier && slave_dev->ethtool_ops == NULL &&
|
|
slave_ops->ndo_do_ioctl == NULL) {
|
|
pr_warning("%s: Warning: no link monitoring support for %s\n",
|
|
bond_dev->name, slave_dev->name);
|
|
}
|
|
|
|
/* already enslaved */
|
|
if (slave_dev->flags & IFF_SLAVE) {
|
|
pr_debug("Error, Device was already enslaved\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
/* vlan challenged mutual exclusion */
|
|
/* no need to lock since we're protected by rtnl_lock */
|
|
if (slave_dev->features & NETIF_F_VLAN_CHALLENGED) {
|
|
pr_debug("%s: NETIF_F_VLAN_CHALLENGED\n", slave_dev->name);
|
|
if (bond_vlan_used(bond)) {
|
|
pr_err("%s: Error: cannot enslave VLAN challenged slave %s on VLAN enabled bond %s\n",
|
|
bond_dev->name, slave_dev->name, bond_dev->name);
|
|
return -EPERM;
|
|
} else {
|
|
pr_warning("%s: Warning: enslaved VLAN challenged slave %s. Adding VLANs will be blocked as long as %s is part of bond %s\n",
|
|
bond_dev->name, slave_dev->name,
|
|
slave_dev->name, bond_dev->name);
|
|
}
|
|
} else {
|
|
pr_debug("%s: ! NETIF_F_VLAN_CHALLENGED\n", slave_dev->name);
|
|
}
|
|
|
|
/*
|
|
* Old ifenslave binaries are no longer supported. These can
|
|
* be identified with moderate accuracy by the state of the slave:
|
|
* the current ifenslave will set the interface down prior to
|
|
* enslaving it; the old ifenslave will not.
|
|
*/
|
|
if ((slave_dev->flags & IFF_UP)) {
|
|
pr_err("%s is up. This may be due to an out of date ifenslave.\n",
|
|
slave_dev->name);
|
|
res = -EPERM;
|
|
goto err_undo_flags;
|
|
}
|
|
|
|
/* set bonding device ether type by slave - bonding netdevices are
|
|
* created with ether_setup, so when the slave type is not ARPHRD_ETHER
|
|
* there is a need to override some of the type dependent attribs/funcs.
|
|
*
|
|
* bond ether type mutual exclusion - don't allow slaves of dissimilar
|
|
* ether type (eg ARPHRD_ETHER and ARPHRD_INFINIBAND) share the same bond
|
|
*/
|
|
if (bond->slave_cnt == 0) {
|
|
if (bond_dev->type != slave_dev->type) {
|
|
pr_debug("%s: change device type from %d to %d\n",
|
|
bond_dev->name,
|
|
bond_dev->type, slave_dev->type);
|
|
|
|
res = netdev_bonding_change(bond_dev,
|
|
NETDEV_PRE_TYPE_CHANGE);
|
|
res = notifier_to_errno(res);
|
|
if (res) {
|
|
pr_err("%s: refused to change device type\n",
|
|
bond_dev->name);
|
|
res = -EBUSY;
|
|
goto err_undo_flags;
|
|
}
|
|
|
|
/* Flush unicast and multicast addresses */
|
|
dev_uc_flush(bond_dev);
|
|
dev_mc_flush(bond_dev);
|
|
|
|
if (slave_dev->type != ARPHRD_ETHER)
|
|
bond_setup_by_slave(bond_dev, slave_dev);
|
|
else {
|
|
ether_setup(bond_dev);
|
|
bond_dev->priv_flags &= ~IFF_TX_SKB_SHARING;
|
|
}
|
|
|
|
netdev_bonding_change(bond_dev,
|
|
NETDEV_POST_TYPE_CHANGE);
|
|
}
|
|
} else if (bond_dev->type != slave_dev->type) {
|
|
pr_err("%s ether type (%d) is different from other slaves (%d), can not enslave it.\n",
|
|
slave_dev->name,
|
|
slave_dev->type, bond_dev->type);
|
|
res = -EINVAL;
|
|
goto err_undo_flags;
|
|
}
|
|
|
|
if (slave_ops->ndo_set_mac_address == NULL) {
|
|
if (bond->slave_cnt == 0) {
|
|
pr_warning("%s: Warning: The first slave device specified does not support setting the MAC address. Setting fail_over_mac to active.",
|
|
bond_dev->name);
|
|
bond->params.fail_over_mac = BOND_FOM_ACTIVE;
|
|
} else if (bond->params.fail_over_mac != BOND_FOM_ACTIVE) {
|
|
pr_err("%s: Error: The slave device specified does not support setting the MAC address, but fail_over_mac is not set to active.\n",
|
|
bond_dev->name);
|
|
res = -EOPNOTSUPP;
|
|
goto err_undo_flags;
|
|
}
|
|
}
|
|
|
|
call_netdevice_notifiers(NETDEV_JOIN, slave_dev);
|
|
|
|
/* If this is the first slave, then we need to set the master's hardware
|
|
* address to be the same as the slave's. */
|
|
if (is_zero_ether_addr(bond->dev->dev_addr))
|
|
memcpy(bond->dev->dev_addr, slave_dev->dev_addr,
|
|
slave_dev->addr_len);
|
|
|
|
|
|
new_slave = kzalloc(sizeof(struct slave), GFP_KERNEL);
|
|
if (!new_slave) {
|
|
res = -ENOMEM;
|
|
goto err_undo_flags;
|
|
}
|
|
|
|
/*
|
|
* Set the new_slave's queue_id to be zero. Queue ID mapping
|
|
* is set via sysfs or module option if desired.
|
|
*/
|
|
new_slave->queue_id = 0;
|
|
|
|
/* Save slave's original mtu and then set it to match the bond */
|
|
new_slave->original_mtu = slave_dev->mtu;
|
|
res = dev_set_mtu(slave_dev, bond->dev->mtu);
|
|
if (res) {
|
|
pr_debug("Error %d calling dev_set_mtu\n", res);
|
|
goto err_free;
|
|
}
|
|
|
|
/*
|
|
* Save slave's original ("permanent") mac address for modes
|
|
* that need it, and for restoring it upon release, and then
|
|
* set it to the master's address
|
|
*/
|
|
memcpy(new_slave->perm_hwaddr, slave_dev->dev_addr, ETH_ALEN);
|
|
|
|
if (!bond->params.fail_over_mac) {
|
|
/*
|
|
* Set slave to master's mac address. The application already
|
|
* set the master's mac address to that of the first slave
|
|
*/
|
|
memcpy(addr.sa_data, bond_dev->dev_addr, bond_dev->addr_len);
|
|
addr.sa_family = slave_dev->type;
|
|
res = dev_set_mac_address(slave_dev, &addr);
|
|
if (res) {
|
|
pr_debug("Error %d calling set_mac_address\n", res);
|
|
goto err_restore_mtu;
|
|
}
|
|
}
|
|
|
|
res = netdev_set_bond_master(slave_dev, bond_dev);
|
|
if (res) {
|
|
pr_debug("Error %d calling netdev_set_bond_master\n", res);
|
|
goto err_restore_mac;
|
|
}
|
|
|
|
/* open the slave since the application closed it */
|
|
res = dev_open(slave_dev);
|
|
if (res) {
|
|
pr_debug("Opening slave %s failed\n", slave_dev->name);
|
|
goto err_unset_master;
|
|
}
|
|
|
|
new_slave->bond = bond;
|
|
new_slave->dev = slave_dev;
|
|
slave_dev->priv_flags |= IFF_BONDING;
|
|
|
|
if (bond_is_lb(bond)) {
|
|
/* bond_alb_init_slave() must be called before all other stages since
|
|
* it might fail and we do not want to have to undo everything
|
|
*/
|
|
res = bond_alb_init_slave(bond, new_slave);
|
|
if (res)
|
|
goto err_close;
|
|
}
|
|
|
|
/* If the mode USES_PRIMARY, then the new slave gets the
|
|
* master's promisc (and mc) settings only if it becomes the
|
|
* curr_active_slave, and that is taken care of later when calling
|
|
* bond_change_active()
|
|
*/
|
|
if (!USES_PRIMARY(bond->params.mode)) {
|
|
/* set promiscuity level to new slave */
|
|
if (bond_dev->flags & IFF_PROMISC) {
|
|
res = dev_set_promiscuity(slave_dev, 1);
|
|
if (res)
|
|
goto err_close;
|
|
}
|
|
|
|
/* set allmulti level to new slave */
|
|
if (bond_dev->flags & IFF_ALLMULTI) {
|
|
res = dev_set_allmulti(slave_dev, 1);
|
|
if (res)
|
|
goto err_close;
|
|
}
|
|
|
|
netif_addr_lock_bh(bond_dev);
|
|
/* upload master's mc_list to new slave */
|
|
netdev_for_each_mc_addr(ha, bond_dev)
|
|
dev_mc_add(slave_dev, ha->addr);
|
|
netif_addr_unlock_bh(bond_dev);
|
|
}
|
|
|
|
if (bond->params.mode == BOND_MODE_8023AD) {
|
|
/* add lacpdu mc addr to mc list */
|
|
u8 lacpdu_multicast[ETH_ALEN] = MULTICAST_LACPDU_ADDR;
|
|
|
|
dev_mc_add(slave_dev, lacpdu_multicast);
|
|
}
|
|
|
|
bond_add_vlans_on_slave(bond, slave_dev);
|
|
|
|
write_lock_bh(&bond->lock);
|
|
|
|
bond_attach_slave(bond, new_slave);
|
|
|
|
new_slave->delay = 0;
|
|
new_slave->link_failure_count = 0;
|
|
|
|
write_unlock_bh(&bond->lock);
|
|
|
|
bond_compute_features(bond);
|
|
|
|
read_lock(&bond->lock);
|
|
|
|
new_slave->last_arp_rx = jiffies;
|
|
|
|
if (bond->params.miimon && !bond->params.use_carrier) {
|
|
link_reporting = bond_check_dev_link(bond, slave_dev, 1);
|
|
|
|
if ((link_reporting == -1) && !bond->params.arp_interval) {
|
|
/*
|
|
* miimon is set but a bonded network driver
|
|
* does not support ETHTOOL/MII and
|
|
* arp_interval is not set. Note: if
|
|
* use_carrier is enabled, we will never go
|
|
* here (because netif_carrier is always
|
|
* supported); thus, we don't need to change
|
|
* the messages for netif_carrier.
|
|
*/
|
|
pr_warning("%s: Warning: MII and ETHTOOL support not available for interface %s, and arp_interval/arp_ip_target module parameters not specified, thus bonding will not detect link failures! see bonding.txt for details.\n",
|
|
bond_dev->name, slave_dev->name);
|
|
} else if (link_reporting == -1) {
|
|
/* unable get link status using mii/ethtool */
|
|
pr_warning("%s: Warning: can't get link status from interface %s; the network driver associated with this interface does not support MII or ETHTOOL link status reporting, thus miimon has no effect on this interface.\n",
|
|
bond_dev->name, slave_dev->name);
|
|
}
|
|
}
|
|
|
|
/* check for initial state */
|
|
if (!bond->params.miimon ||
|
|
(bond_check_dev_link(bond, slave_dev, 0) == BMSR_LSTATUS)) {
|
|
if (bond->params.updelay) {
|
|
pr_debug("Initial state of slave_dev is BOND_LINK_BACK\n");
|
|
new_slave->link = BOND_LINK_BACK;
|
|
new_slave->delay = bond->params.updelay;
|
|
} else {
|
|
pr_debug("Initial state of slave_dev is BOND_LINK_UP\n");
|
|
new_slave->link = BOND_LINK_UP;
|
|
}
|
|
new_slave->jiffies = jiffies;
|
|
} else {
|
|
pr_debug("Initial state of slave_dev is BOND_LINK_DOWN\n");
|
|
new_slave->link = BOND_LINK_DOWN;
|
|
}
|
|
|
|
bond_update_speed_duplex(new_slave);
|
|
|
|
if (USES_PRIMARY(bond->params.mode) && bond->params.primary[0]) {
|
|
/* if there is a primary slave, remember it */
|
|
if (strcmp(bond->params.primary, new_slave->dev->name) == 0) {
|
|
bond->primary_slave = new_slave;
|
|
bond->force_primary = true;
|
|
}
|
|
}
|
|
|
|
write_lock_bh(&bond->curr_slave_lock);
|
|
|
|
switch (bond->params.mode) {
|
|
case BOND_MODE_ACTIVEBACKUP:
|
|
bond_set_slave_inactive_flags(new_slave);
|
|
bond_select_active_slave(bond);
|
|
break;
|
|
case BOND_MODE_8023AD:
|
|
/* in 802.3ad mode, the internal mechanism
|
|
* will activate the slaves in the selected
|
|
* aggregator
|
|
*/
|
|
bond_set_slave_inactive_flags(new_slave);
|
|
/* if this is the first slave */
|
|
if (bond->slave_cnt == 1) {
|
|
SLAVE_AD_INFO(new_slave).id = 1;
|
|
/* Initialize AD with the number of times that the AD timer is called in 1 second
|
|
* can be called only after the mac address of the bond is set
|
|
*/
|
|
bond_3ad_initialize(bond, 1000/AD_TIMER_INTERVAL);
|
|
} else {
|
|
SLAVE_AD_INFO(new_slave).id =
|
|
SLAVE_AD_INFO(new_slave->prev).id + 1;
|
|
}
|
|
|
|
bond_3ad_bind_slave(new_slave);
|
|
break;
|
|
case BOND_MODE_TLB:
|
|
case BOND_MODE_ALB:
|
|
bond_set_active_slave(new_slave);
|
|
bond_set_slave_inactive_flags(new_slave);
|
|
bond_select_active_slave(bond);
|
|
break;
|
|
default:
|
|
pr_debug("This slave is always active in trunk mode\n");
|
|
|
|
/* always active in trunk mode */
|
|
bond_set_active_slave(new_slave);
|
|
|
|
/* In trunking mode there is little meaning to curr_active_slave
|
|
* anyway (it holds no special properties of the bond device),
|
|
* so we can change it without calling change_active_interface()
|
|
*/
|
|
if (!bond->curr_active_slave)
|
|
bond->curr_active_slave = new_slave;
|
|
|
|
break;
|
|
} /* switch(bond_mode) */
|
|
|
|
write_unlock_bh(&bond->curr_slave_lock);
|
|
|
|
bond_set_carrier(bond);
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
slave_dev->npinfo = bond_netpoll_info(bond);
|
|
if (slave_dev->npinfo) {
|
|
if (slave_enable_netpoll(new_slave)) {
|
|
read_unlock(&bond->lock);
|
|
pr_info("Error, %s: master_dev is using netpoll, "
|
|
"but new slave device does not support netpoll.\n",
|
|
bond_dev->name);
|
|
res = -EBUSY;
|
|
goto err_close;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
read_unlock(&bond->lock);
|
|
|
|
res = bond_create_slave_symlinks(bond_dev, slave_dev);
|
|
if (res)
|
|
goto err_close;
|
|
|
|
res = netdev_rx_handler_register(slave_dev, bond_handle_frame,
|
|
new_slave);
|
|
if (res) {
|
|
pr_debug("Error %d calling netdev_rx_handler_register\n", res);
|
|
goto err_dest_symlinks;
|
|
}
|
|
|
|
pr_info("%s: enslaving %s as a%s interface with a%s link.\n",
|
|
bond_dev->name, slave_dev->name,
|
|
bond_is_active_slave(new_slave) ? "n active" : " backup",
|
|
new_slave->link != BOND_LINK_DOWN ? "n up" : " down");
|
|
|
|
/* enslave is successful */
|
|
return 0;
|
|
|
|
/* Undo stages on error */
|
|
err_dest_symlinks:
|
|
bond_destroy_slave_symlinks(bond_dev, slave_dev);
|
|
|
|
err_close:
|
|
dev_close(slave_dev);
|
|
|
|
err_unset_master:
|
|
netdev_set_bond_master(slave_dev, NULL);
|
|
|
|
err_restore_mac:
|
|
if (!bond->params.fail_over_mac) {
|
|
/* XXX TODO - fom follow mode needs to change master's
|
|
* MAC if this slave's MAC is in use by the bond, or at
|
|
* least print a warning.
|
|
*/
|
|
memcpy(addr.sa_data, new_slave->perm_hwaddr, ETH_ALEN);
|
|
addr.sa_family = slave_dev->type;
|
|
dev_set_mac_address(slave_dev, &addr);
|
|
}
|
|
|
|
err_restore_mtu:
|
|
dev_set_mtu(slave_dev, new_slave->original_mtu);
|
|
|
|
err_free:
|
|
kfree(new_slave);
|
|
|
|
err_undo_flags:
|
|
bond_compute_features(bond);
|
|
|
|
return res;
|
|
}
|
|
|
|
/*
|
|
* Try to release the slave device <slave> from the bond device <master>
|
|
* It is legal to access curr_active_slave without a lock because all the function
|
|
* is write-locked.
|
|
*
|
|
* The rules for slave state should be:
|
|
* for Active/Backup:
|
|
* Active stays on all backups go down
|
|
* for Bonded connections:
|
|
* The first up interface should be left on and all others downed.
|
|
*/
|
|
int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
|
|
{
|
|
struct bonding *bond = netdev_priv(bond_dev);
|
|
struct slave *slave, *oldcurrent;
|
|
struct sockaddr addr;
|
|
u32 old_features = bond_dev->features;
|
|
|
|
/* slave is not a slave or master is not master of this slave */
|
|
if (!(slave_dev->flags & IFF_SLAVE) ||
|
|
(slave_dev->master != bond_dev)) {
|
|
pr_err("%s: Error: cannot release %s.\n",
|
|
bond_dev->name, slave_dev->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
block_netpoll_tx();
|
|
netdev_bonding_change(bond_dev, NETDEV_RELEASE);
|
|
write_lock_bh(&bond->lock);
|
|
|
|
slave = bond_get_slave_by_dev(bond, slave_dev);
|
|
if (!slave) {
|
|
/* not a slave of this bond */
|
|
pr_info("%s: %s not enslaved\n",
|
|
bond_dev->name, slave_dev->name);
|
|
write_unlock_bh(&bond->lock);
|
|
unblock_netpoll_tx();
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* unregister rx_handler early so bond_handle_frame wouldn't be called
|
|
* for this slave anymore.
|
|
*/
|
|
netdev_rx_handler_unregister(slave_dev);
|
|
write_unlock_bh(&bond->lock);
|
|
synchronize_net();
|
|
write_lock_bh(&bond->lock);
|
|
|
|
if (!bond->params.fail_over_mac) {
|
|
if (!compare_ether_addr(bond_dev->dev_addr, slave->perm_hwaddr) &&
|
|
bond->slave_cnt > 1)
|
|
pr_warning("%s: Warning: the permanent HWaddr of %s - %pM - is still in use by %s. Set the HWaddr of %s to a different address to avoid conflicts.\n",
|
|
bond_dev->name, slave_dev->name,
|
|
slave->perm_hwaddr,
|
|
bond_dev->name, slave_dev->name);
|
|
}
|
|
|
|
/* Inform AD package of unbinding of slave. */
|
|
if (bond->params.mode == BOND_MODE_8023AD) {
|
|
/* must be called before the slave is
|
|
* detached from the list
|
|
*/
|
|
bond_3ad_unbind_slave(slave);
|
|
}
|
|
|
|
pr_info("%s: releasing %s interface %s\n",
|
|
bond_dev->name,
|
|
bond_is_active_slave(slave) ? "active" : "backup",
|
|
slave_dev->name);
|
|
|
|
oldcurrent = bond->curr_active_slave;
|
|
|
|
bond->current_arp_slave = NULL;
|
|
|
|
/* release the slave from its bond */
|
|
bond_detach_slave(bond, slave);
|
|
|
|
if (bond->primary_slave == slave)
|
|
bond->primary_slave = NULL;
|
|
|
|
if (oldcurrent == slave)
|
|
bond_change_active_slave(bond, NULL);
|
|
|
|
if (bond_is_lb(bond)) {
|
|
/* Must be called only after the slave has been
|
|
* detached from the list and the curr_active_slave
|
|
* has been cleared (if our_slave == old_current),
|
|
* but before a new active slave is selected.
|
|
*/
|
|
write_unlock_bh(&bond->lock);
|
|
bond_alb_deinit_slave(bond, slave);
|
|
write_lock_bh(&bond->lock);
|
|
}
|
|
|
|
if (oldcurrent == slave) {
|
|
/*
|
|
* Note that we hold RTNL over this sequence, so there
|
|
* is no concern that another slave add/remove event
|
|
* will interfere.
|
|
*/
|
|
write_unlock_bh(&bond->lock);
|
|
read_lock(&bond->lock);
|
|
write_lock_bh(&bond->curr_slave_lock);
|
|
|
|
bond_select_active_slave(bond);
|
|
|
|
write_unlock_bh(&bond->curr_slave_lock);
|
|
read_unlock(&bond->lock);
|
|
write_lock_bh(&bond->lock);
|
|
}
|
|
|
|
if (bond->slave_cnt == 0) {
|
|
bond_set_carrier(bond);
|
|
|
|
/* if the last slave was removed, zero the mac address
|
|
* of the master so it will be set by the application
|
|
* to the mac address of the first slave
|
|
*/
|
|
memset(bond_dev->dev_addr, 0, bond_dev->addr_len);
|
|
|
|
if (bond_vlan_used(bond)) {
|
|
pr_warning("%s: Warning: clearing HW address of %s while it still has VLANs.\n",
|
|
bond_dev->name, bond_dev->name);
|
|
pr_warning("%s: When re-adding slaves, make sure the bond's HW address matches its VLANs'.\n",
|
|
bond_dev->name);
|
|
}
|
|
}
|
|
|
|
write_unlock_bh(&bond->lock);
|
|
unblock_netpoll_tx();
|
|
|
|
bond_compute_features(bond);
|
|
if (!(bond_dev->features & NETIF_F_VLAN_CHALLENGED) &&
|
|
(old_features & NETIF_F_VLAN_CHALLENGED))
|
|
pr_info("%s: last VLAN challenged slave %s left bond %s. VLAN blocking is removed\n",
|
|
bond_dev->name, slave_dev->name, bond_dev->name);
|
|
|
|
/* must do this from outside any spinlocks */
|
|
bond_destroy_slave_symlinks(bond_dev, slave_dev);
|
|
|
|
bond_del_vlans_from_slave(bond, slave_dev);
|
|
|
|
/* If the mode USES_PRIMARY, then we should only remove its
|
|
* promisc and mc settings if it was the curr_active_slave, but that was
|
|
* already taken care of above when we detached the slave
|
|
*/
|
|
if (!USES_PRIMARY(bond->params.mode)) {
|
|
/* unset promiscuity level from slave */
|
|
if (bond_dev->flags & IFF_PROMISC)
|
|
dev_set_promiscuity(slave_dev, -1);
|
|
|
|
/* unset allmulti level from slave */
|
|
if (bond_dev->flags & IFF_ALLMULTI)
|
|
dev_set_allmulti(slave_dev, -1);
|
|
|
|
/* flush master's mc_list from slave */
|
|
netif_addr_lock_bh(bond_dev);
|
|
bond_mc_list_flush(bond_dev, slave_dev);
|
|
netif_addr_unlock_bh(bond_dev);
|
|
}
|
|
|
|
netdev_set_bond_master(slave_dev, NULL);
|
|
|
|
slave_disable_netpoll(slave);
|
|
|
|
/* close slave before restoring its mac address */
|
|
dev_close(slave_dev);
|
|
|
|
if (bond->params.fail_over_mac != BOND_FOM_ACTIVE) {
|
|
/* restore original ("permanent") mac address */
|
|
memcpy(addr.sa_data, slave->perm_hwaddr, ETH_ALEN);
|
|
addr.sa_family = slave_dev->type;
|
|
dev_set_mac_address(slave_dev, &addr);
|
|
}
|
|
|
|
dev_set_mtu(slave_dev, slave->original_mtu);
|
|
|
|
slave_dev->priv_flags &= ~IFF_BONDING;
|
|
|
|
kfree(slave);
|
|
|
|
return 0; /* deletion OK */
|
|
}
|
|
|
|
/*
|
|
* First release a slave and then destroy the bond if no more slaves are left.
|
|
* Must be under rtnl_lock when this function is called.
|
|
*/
|
|
static int bond_release_and_destroy(struct net_device *bond_dev,
|
|
struct net_device *slave_dev)
|
|
{
|
|
struct bonding *bond = netdev_priv(bond_dev);
|
|
int ret;
|
|
|
|
ret = bond_release(bond_dev, slave_dev);
|
|
if ((ret == 0) && (bond->slave_cnt == 0)) {
|
|
bond_dev->priv_flags |= IFF_DISABLE_NETPOLL;
|
|
pr_info("%s: destroying bond %s.\n",
|
|
bond_dev->name, bond_dev->name);
|
|
unregister_netdevice(bond_dev);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* This function releases all slaves.
|
|
*/
|
|
static int bond_release_all(struct net_device *bond_dev)
|
|
{
|
|
struct bonding *bond = netdev_priv(bond_dev);
|
|
struct slave *slave;
|
|
struct net_device *slave_dev;
|
|
struct sockaddr addr;
|
|
|
|
write_lock_bh(&bond->lock);
|
|
|
|
netif_carrier_off(bond_dev);
|
|
|
|
if (bond->slave_cnt == 0)
|
|
goto out;
|
|
|
|
bond->current_arp_slave = NULL;
|
|
bond->primary_slave = NULL;
|
|
bond_change_active_slave(bond, NULL);
|
|
|
|
while ((slave = bond->first_slave) != NULL) {
|
|
/* Inform AD package of unbinding of slave
|
|
* before slave is detached from the list.
|
|
*/
|
|
if (bond->params.mode == BOND_MODE_8023AD)
|
|
bond_3ad_unbind_slave(slave);
|
|
|
|
slave_dev = slave->dev;
|
|
bond_detach_slave(bond, slave);
|
|
|
|
/* now that the slave is detached, unlock and perform
|
|
* all the undo steps that should not be called from
|
|
* within a lock.
|
|
*/
|
|
write_unlock_bh(&bond->lock);
|
|
|
|
/* unregister rx_handler early so bond_handle_frame wouldn't
|
|
* be called for this slave anymore.
|
|
*/
|
|
netdev_rx_handler_unregister(slave_dev);
|
|
synchronize_net();
|
|
|
|
if (bond_is_lb(bond)) {
|
|
/* must be called only after the slave
|
|
* has been detached from the list
|
|
*/
|
|
bond_alb_deinit_slave(bond, slave);
|
|
}
|
|
|
|
bond_destroy_slave_symlinks(bond_dev, slave_dev);
|
|
bond_del_vlans_from_slave(bond, slave_dev);
|
|
|
|
/* If the mode USES_PRIMARY, then we should only remove its
|
|
* promisc and mc settings if it was the curr_active_slave, but that was
|
|
* already taken care of above when we detached the slave
|
|
*/
|
|
if (!USES_PRIMARY(bond->params.mode)) {
|
|
/* unset promiscuity level from slave */
|
|
if (bond_dev->flags & IFF_PROMISC)
|
|
dev_set_promiscuity(slave_dev, -1);
|
|
|
|
/* unset allmulti level from slave */
|
|
if (bond_dev->flags & IFF_ALLMULTI)
|
|
dev_set_allmulti(slave_dev, -1);
|
|
|
|
/* flush master's mc_list from slave */
|
|
netif_addr_lock_bh(bond_dev);
|
|
bond_mc_list_flush(bond_dev, slave_dev);
|
|
netif_addr_unlock_bh(bond_dev);
|
|
}
|
|
|
|
netdev_set_bond_master(slave_dev, NULL);
|
|
|
|
slave_disable_netpoll(slave);
|
|
|
|
/* close slave before restoring its mac address */
|
|
dev_close(slave_dev);
|
|
|
|
if (!bond->params.fail_over_mac) {
|
|
/* restore original ("permanent") mac address*/
|
|
memcpy(addr.sa_data, slave->perm_hwaddr, ETH_ALEN);
|
|
addr.sa_family = slave_dev->type;
|
|
dev_set_mac_address(slave_dev, &addr);
|
|
}
|
|
|
|
kfree(slave);
|
|
|
|
/* re-acquire the lock before getting the next slave */
|
|
write_lock_bh(&bond->lock);
|
|
}
|
|
|
|
/* zero the mac address of the master so it will be
|
|
* set by the application to the mac address of the
|
|
* first slave
|
|
*/
|
|
memset(bond_dev->dev_addr, 0, bond_dev->addr_len);
|
|
|
|
if (bond_vlan_used(bond)) {
|
|
pr_warning("%s: Warning: clearing HW address of %s while it still has VLANs.\n",
|
|
bond_dev->name, bond_dev->name);
|
|
pr_warning("%s: When re-adding slaves, make sure the bond's HW address matches its VLANs'.\n",
|
|
bond_dev->name);
|
|
}
|
|
|
|
pr_info("%s: released all slaves\n", bond_dev->name);
|
|
|
|
out:
|
|
write_unlock_bh(&bond->lock);
|
|
|
|
bond_compute_features(bond);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function changes the active slave to slave <slave_dev>.
|
|
* It returns -EINVAL in the following cases.
|
|
* - <slave_dev> is not found in the list.
|
|
* - There is not active slave now.
|
|
* - <slave_dev> is already active.
|
|
* - The link state of <slave_dev> is not BOND_LINK_UP.
|
|
* - <slave_dev> is not running.
|
|
* In these cases, this function does nothing.
|
|
* In the other cases, current_slave pointer is changed and 0 is returned.
|
|
*/
|
|
static int bond_ioctl_change_active(struct net_device *bond_dev, struct net_device *slave_dev)
|
|
{
|
|
struct bonding *bond = netdev_priv(bond_dev);
|
|
struct slave *old_active = NULL;
|
|
struct slave *new_active = NULL;
|
|
int res = 0;
|
|
|
|
if (!USES_PRIMARY(bond->params.mode))
|
|
return -EINVAL;
|
|
|
|
/* Verify that master_dev is indeed the master of slave_dev */
|
|
if (!(slave_dev->flags & IFF_SLAVE) || (slave_dev->master != bond_dev))
|
|
return -EINVAL;
|
|
|
|
read_lock(&bond->lock);
|
|
|
|
read_lock(&bond->curr_slave_lock);
|
|
old_active = bond->curr_active_slave;
|
|
read_unlock(&bond->curr_slave_lock);
|
|
|
|
new_active = bond_get_slave_by_dev(bond, slave_dev);
|
|
|
|
/*
|
|
* Changing to the current active: do nothing; return success.
|
|
*/
|
|
if (new_active && (new_active == old_active)) {
|
|
read_unlock(&bond->lock);
|
|
return 0;
|
|
}
|
|
|
|
if ((new_active) &&
|
|
(old_active) &&
|
|
(new_active->link == BOND_LINK_UP) &&
|
|
IS_UP(new_active->dev)) {
|
|
block_netpoll_tx();
|
|
write_lock_bh(&bond->curr_slave_lock);
|
|
bond_change_active_slave(bond, new_active);
|
|
write_unlock_bh(&bond->curr_slave_lock);
|
|
unblock_netpoll_tx();
|
|
} else
|
|
res = -EINVAL;
|
|
|
|
read_unlock(&bond->lock);
|
|
|
|
return res;
|
|
}
|
|
|
|
static int bond_info_query(struct net_device *bond_dev, struct ifbond *info)
|
|
{
|
|
struct bonding *bond = netdev_priv(bond_dev);
|
|
|
|
info->bond_mode = bond->params.mode;
|
|
info->miimon = bond->params.miimon;
|
|
|
|
read_lock(&bond->lock);
|
|
info->num_slaves = bond->slave_cnt;
|
|
read_unlock(&bond->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bond_slave_info_query(struct net_device *bond_dev, struct ifslave *info)
|
|
{
|
|
struct bonding *bond = netdev_priv(bond_dev);
|
|
struct slave *slave;
|
|
int i, res = -ENODEV;
|
|
|
|
read_lock(&bond->lock);
|
|
|
|
bond_for_each_slave(bond, slave, i) {
|
|
if (i == (int)info->slave_id) {
|
|
res = 0;
|
|
strcpy(info->slave_name, slave->dev->name);
|
|
info->link = slave->link;
|
|
info->state = bond_slave_state(slave);
|
|
info->link_failure_count = slave->link_failure_count;
|
|
break;
|
|
}
|
|
}
|
|
|
|
read_unlock(&bond->lock);
|
|
|
|
return res;
|
|
}
|
|
|
|
/*-------------------------------- Monitoring -------------------------------*/
|
|
|
|
|
|
static int bond_miimon_inspect(struct bonding *bond)
|
|
{
|
|
struct slave *slave;
|
|
int i, link_state, commit = 0;
|
|
bool ignore_updelay;
|
|
|
|
ignore_updelay = !bond->curr_active_slave ? true : false;
|
|
|
|
bond_for_each_slave(bond, slave, i) {
|
|
slave->new_link = BOND_LINK_NOCHANGE;
|
|
|
|
link_state = bond_check_dev_link(bond, slave->dev, 0);
|
|
|
|
switch (slave->link) {
|
|
case BOND_LINK_UP:
|
|
if (link_state)
|
|
continue;
|
|
|
|
slave->link = BOND_LINK_FAIL;
|
|
slave->delay = bond->params.downdelay;
|
|
if (slave->delay) {
|
|
pr_info("%s: link status down for %sinterface %s, disabling it in %d ms.\n",
|
|
bond->dev->name,
|
|
(bond->params.mode ==
|
|
BOND_MODE_ACTIVEBACKUP) ?
|
|
(bond_is_active_slave(slave) ?
|
|
"active " : "backup ") : "",
|
|
slave->dev->name,
|
|
bond->params.downdelay * bond->params.miimon);
|
|
}
|
|
/*FALLTHRU*/
|
|
case BOND_LINK_FAIL:
|
|
if (link_state) {
|
|
/*
|
|
* recovered before downdelay expired
|
|
*/
|
|
slave->link = BOND_LINK_UP;
|
|
slave->jiffies = jiffies;
|
|
pr_info("%s: link status up again after %d ms for interface %s.\n",
|
|
bond->dev->name,
|
|
(bond->params.downdelay - slave->delay) *
|
|
bond->params.miimon,
|
|
slave->dev->name);
|
|
continue;
|
|
}
|
|
|
|
if (slave->delay <= 0) {
|
|
slave->new_link = BOND_LINK_DOWN;
|
|
commit++;
|
|
continue;
|
|
}
|
|
|
|
slave->delay--;
|
|
break;
|
|
|
|
case BOND_LINK_DOWN:
|
|
if (!link_state)
|
|
continue;
|
|
|
|
slave->link = BOND_LINK_BACK;
|
|
slave->delay = bond->params.updelay;
|
|
|
|
if (slave->delay) {
|
|
pr_info("%s: link status up for interface %s, enabling it in %d ms.\n",
|
|
bond->dev->name, slave->dev->name,
|
|
ignore_updelay ? 0 :
|
|
bond->params.updelay *
|
|
bond->params.miimon);
|
|
}
|
|
/*FALLTHRU*/
|
|
case BOND_LINK_BACK:
|
|
if (!link_state) {
|
|
slave->link = BOND_LINK_DOWN;
|
|
pr_info("%s: link status down again after %d ms for interface %s.\n",
|
|
bond->dev->name,
|
|
(bond->params.updelay - slave->delay) *
|
|
bond->params.miimon,
|
|
slave->dev->name);
|
|
|
|
continue;
|
|
}
|
|
|
|
if (ignore_updelay)
|
|
slave->delay = 0;
|
|
|
|
if (slave->delay <= 0) {
|
|
slave->new_link = BOND_LINK_UP;
|
|
commit++;
|
|
ignore_updelay = false;
|
|
continue;
|
|
}
|
|
|
|
slave->delay--;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return commit;
|
|
}
|
|
|
|
static void bond_miimon_commit(struct bonding *bond)
|
|
{
|
|
struct slave *slave;
|
|
int i;
|
|
|
|
bond_for_each_slave(bond, slave, i) {
|
|
switch (slave->new_link) {
|
|
case BOND_LINK_NOCHANGE:
|
|
continue;
|
|
|
|
case BOND_LINK_UP:
|
|
slave->link = BOND_LINK_UP;
|
|
slave->jiffies = jiffies;
|
|
|
|
if (bond->params.mode == BOND_MODE_8023AD) {
|
|
/* prevent it from being the active one */
|
|
bond_set_backup_slave(slave);
|
|
} else if (bond->params.mode != BOND_MODE_ACTIVEBACKUP) {
|
|
/* make it immediately active */
|
|
bond_set_active_slave(slave);
|
|
} else if (slave != bond->primary_slave) {
|
|
/* prevent it from being the active one */
|
|
bond_set_backup_slave(slave);
|
|
}
|
|
|
|
bond_update_speed_duplex(slave);
|
|
|
|
pr_info("%s: link status definitely up for interface %s, %u Mbps %s duplex.\n",
|
|
bond->dev->name, slave->dev->name,
|
|
slave->speed, slave->duplex ? "full" : "half");
|
|
|
|
/* notify ad that the link status has changed */
|
|
if (bond->params.mode == BOND_MODE_8023AD)
|
|
bond_3ad_handle_link_change(slave, BOND_LINK_UP);
|
|
|
|
if (bond_is_lb(bond))
|
|
bond_alb_handle_link_change(bond, slave,
|
|
BOND_LINK_UP);
|
|
|
|
if (!bond->curr_active_slave ||
|
|
(slave == bond->primary_slave))
|
|
goto do_failover;
|
|
|
|
continue;
|
|
|
|
case BOND_LINK_DOWN:
|
|
if (slave->link_failure_count < UINT_MAX)
|
|
slave->link_failure_count++;
|
|
|
|
slave->link = BOND_LINK_DOWN;
|
|
|
|
if (bond->params.mode == BOND_MODE_ACTIVEBACKUP ||
|
|
bond->params.mode == BOND_MODE_8023AD)
|
|
bond_set_slave_inactive_flags(slave);
|
|
|
|
pr_info("%s: link status definitely down for interface %s, disabling it\n",
|
|
bond->dev->name, slave->dev->name);
|
|
|
|
if (bond->params.mode == BOND_MODE_8023AD)
|
|
bond_3ad_handle_link_change(slave,
|
|
BOND_LINK_DOWN);
|
|
|
|
if (bond_is_lb(bond))
|
|
bond_alb_handle_link_change(bond, slave,
|
|
BOND_LINK_DOWN);
|
|
|
|
if (slave == bond->curr_active_slave)
|
|
goto do_failover;
|
|
|
|
continue;
|
|
|
|
default:
|
|
pr_err("%s: invalid new link %d on slave %s\n",
|
|
bond->dev->name, slave->new_link,
|
|
slave->dev->name);
|
|
slave->new_link = BOND_LINK_NOCHANGE;
|
|
|
|
continue;
|
|
}
|
|
|
|
do_failover:
|
|
ASSERT_RTNL();
|
|
block_netpoll_tx();
|
|
write_lock_bh(&bond->curr_slave_lock);
|
|
bond_select_active_slave(bond);
|
|
write_unlock_bh(&bond->curr_slave_lock);
|
|
unblock_netpoll_tx();
|
|
}
|
|
|
|
bond_set_carrier(bond);
|
|
}
|
|
|
|
/*
|
|
* bond_mii_monitor
|
|
*
|
|
* Really a wrapper that splits the mii monitor into two phases: an
|
|
* inspection, then (if inspection indicates something needs to be done)
|
|
* an acquisition of appropriate locks followed by a commit phase to
|
|
* implement whatever link state changes are indicated.
|
|
*/
|
|
void bond_mii_monitor(struct work_struct *work)
|
|
{
|
|
struct bonding *bond = container_of(work, struct bonding,
|
|
mii_work.work);
|
|
bool should_notify_peers = false;
|
|
unsigned long delay;
|
|
|
|
read_lock(&bond->lock);
|
|
|
|
delay = msecs_to_jiffies(bond->params.miimon);
|
|
|
|
if (bond->slave_cnt == 0)
|
|
goto re_arm;
|
|
|
|
should_notify_peers = bond_should_notify_peers(bond);
|
|
|
|
if (bond_miimon_inspect(bond)) {
|
|
read_unlock(&bond->lock);
|
|
|
|
/* Race avoidance with bond_close cancel of workqueue */
|
|
if (!rtnl_trylock()) {
|
|
read_lock(&bond->lock);
|
|
delay = 1;
|
|
should_notify_peers = false;
|
|
goto re_arm;
|
|
}
|
|
|
|
read_lock(&bond->lock);
|
|
|
|
bond_miimon_commit(bond);
|
|
|
|
read_unlock(&bond->lock);
|
|
rtnl_unlock(); /* might sleep, hold no other locks */
|
|
read_lock(&bond->lock);
|
|
}
|
|
|
|
re_arm:
|
|
if (bond->params.miimon)
|
|
queue_delayed_work(bond->wq, &bond->mii_work, delay);
|
|
|
|
read_unlock(&bond->lock);
|
|
|
|
if (should_notify_peers) {
|
|
if (!rtnl_trylock()) {
|
|
read_lock(&bond->lock);
|
|
bond->send_peer_notif++;
|
|
read_unlock(&bond->lock);
|
|
return;
|
|
}
|
|
netdev_bonding_change(bond->dev, NETDEV_NOTIFY_PEERS);
|
|
rtnl_unlock();
|
|
}
|
|
}
|
|
|
|
static __be32 bond_glean_dev_ip(struct net_device *dev)
|
|
{
|
|
struct in_device *idev;
|
|
struct in_ifaddr *ifa;
|
|
__be32 addr = 0;
|
|
|
|
if (!dev)
|
|
return 0;
|
|
|
|
rcu_read_lock();
|
|
idev = __in_dev_get_rcu(dev);
|
|
if (!idev)
|
|
goto out;
|
|
|
|
ifa = idev->ifa_list;
|
|
if (!ifa)
|
|
goto out;
|
|
|
|
addr = ifa->ifa_local;
|
|
out:
|
|
rcu_read_unlock();
|
|
return addr;
|
|
}
|
|
|
|
static int bond_has_this_ip(struct bonding *bond, __be32 ip)
|
|
{
|
|
struct vlan_entry *vlan;
|
|
|
|
if (ip == bond->master_ip)
|
|
return 1;
|
|
|
|
list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
|
|
if (ip == vlan->vlan_ip)
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* We go to the (large) trouble of VLAN tagging ARP frames because
|
|
* switches in VLAN mode (especially if ports are configured as
|
|
* "native" to a VLAN) might not pass non-tagged frames.
|
|
*/
|
|
static void bond_arp_send(struct net_device *slave_dev, int arp_op, __be32 dest_ip, __be32 src_ip, unsigned short vlan_id)
|
|
{
|
|
struct sk_buff *skb;
|
|
|
|
pr_debug("arp %d on slave %s: dst %x src %x vid %d\n", arp_op,
|
|
slave_dev->name, dest_ip, src_ip, vlan_id);
|
|
|
|
skb = arp_create(arp_op, ETH_P_ARP, dest_ip, slave_dev, src_ip,
|
|
NULL, slave_dev->dev_addr, NULL);
|
|
|
|
if (!skb) {
|
|
pr_err("ARP packet allocation failed\n");
|
|
return;
|
|
}
|
|
if (vlan_id) {
|
|
skb = vlan_put_tag(skb, vlan_id);
|
|
if (!skb) {
|
|
pr_err("failed to insert VLAN tag\n");
|
|
return;
|
|
}
|
|
}
|
|
arp_xmit(skb);
|
|
}
|
|
|
|
|
|
static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
|
|
{
|
|
int i, vlan_id;
|
|
__be32 *targets = bond->params.arp_targets;
|
|
struct vlan_entry *vlan;
|
|
struct net_device *vlan_dev;
|
|
struct rtable *rt;
|
|
|
|
for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) {
|
|
if (!targets[i])
|
|
break;
|
|
pr_debug("basa: target %x\n", targets[i]);
|
|
if (!bond_vlan_used(bond)) {
|
|
pr_debug("basa: empty vlan: arp_send\n");
|
|
bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i],
|
|
bond->master_ip, 0);
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* If VLANs are configured, we do a route lookup to
|
|
* determine which VLAN interface would be used, so we
|
|
* can tag the ARP with the proper VLAN tag.
|
|
*/
|
|
rt = ip_route_output(dev_net(bond->dev), targets[i], 0,
|
|
RTO_ONLINK, 0);
|
|
if (IS_ERR(rt)) {
|
|
if (net_ratelimit()) {
|
|
pr_warning("%s: no route to arp_ip_target %pI4\n",
|
|
bond->dev->name, &targets[i]);
|
|
}
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* This target is not on a VLAN
|
|
*/
|
|
if (rt->dst.dev == bond->dev) {
|
|
ip_rt_put(rt);
|
|
pr_debug("basa: rtdev == bond->dev: arp_send\n");
|
|
bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i],
|
|
bond->master_ip, 0);
|
|
continue;
|
|
}
|
|
|
|
vlan_id = 0;
|
|
list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
|
|
rcu_read_lock();
|
|
vlan_dev = __vlan_find_dev_deep(bond->dev,
|
|
vlan->vlan_id);
|
|
rcu_read_unlock();
|
|
if (vlan_dev == rt->dst.dev) {
|
|
vlan_id = vlan->vlan_id;
|
|
pr_debug("basa: vlan match on %s %d\n",
|
|
vlan_dev->name, vlan_id);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (vlan_id) {
|
|
ip_rt_put(rt);
|
|
bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i],
|
|
vlan->vlan_ip, vlan_id);
|
|
continue;
|
|
}
|
|
|
|
if (net_ratelimit()) {
|
|
pr_warning("%s: no path to arp_ip_target %pI4 via rt.dev %s\n",
|
|
bond->dev->name, &targets[i],
|
|
rt->dst.dev ? rt->dst.dev->name : "NULL");
|
|
}
|
|
ip_rt_put(rt);
|
|
}
|
|
}
|
|
|
|
static void bond_validate_arp(struct bonding *bond, struct slave *slave, __be32 sip, __be32 tip)
|
|
{
|
|
int i;
|
|
__be32 *targets = bond->params.arp_targets;
|
|
|
|
for (i = 0; (i < BOND_MAX_ARP_TARGETS) && targets[i]; i++) {
|
|
pr_debug("bva: sip %pI4 tip %pI4 t[%d] %pI4 bhti(tip) %d\n",
|
|
&sip, &tip, i, &targets[i],
|
|
bond_has_this_ip(bond, tip));
|
|
if (sip == targets[i]) {
|
|
if (bond_has_this_ip(bond, tip))
|
|
slave->last_arp_rx = jiffies;
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void bond_arp_rcv(struct sk_buff *skb, struct bonding *bond,
|
|
struct slave *slave)
|
|
{
|
|
struct arphdr *arp;
|
|
unsigned char *arp_ptr;
|
|
__be32 sip, tip;
|
|
|
|
if (skb->protocol != __cpu_to_be16(ETH_P_ARP))
|
|
return;
|
|
|
|
read_lock(&bond->lock);
|
|
|
|
pr_debug("bond_arp_rcv: bond %s skb->dev %s\n",
|
|
bond->dev->name, skb->dev->name);
|
|
|
|
if (!pskb_may_pull(skb, arp_hdr_len(bond->dev)))
|
|
goto out_unlock;
|
|
|
|
arp = arp_hdr(skb);
|
|
if (arp->ar_hln != bond->dev->addr_len ||
|
|
skb->pkt_type == PACKET_OTHERHOST ||
|
|
skb->pkt_type == PACKET_LOOPBACK ||
|
|
arp->ar_hrd != htons(ARPHRD_ETHER) ||
|
|
arp->ar_pro != htons(ETH_P_IP) ||
|
|
arp->ar_pln != 4)
|
|
goto out_unlock;
|
|
|
|
arp_ptr = (unsigned char *)(arp + 1);
|
|
arp_ptr += bond->dev->addr_len;
|
|
memcpy(&sip, arp_ptr, 4);
|
|
arp_ptr += 4 + bond->dev->addr_len;
|
|
memcpy(&tip, arp_ptr, 4);
|
|
|
|
pr_debug("bond_arp_rcv: %s %s/%d av %d sv %d sip %pI4 tip %pI4\n",
|
|
bond->dev->name, slave->dev->name, bond_slave_state(slave),
|
|
bond->params.arp_validate, slave_do_arp_validate(bond, slave),
|
|
&sip, &tip);
|
|
|
|
/*
|
|
* Backup slaves won't see the ARP reply, but do come through
|
|
* here for each ARP probe (so we swap the sip/tip to validate
|
|
* the probe). In a "redundant switch, common router" type of
|
|
* configuration, the ARP probe will (hopefully) travel from
|
|
* the active, through one switch, the router, then the other
|
|
* switch before reaching the backup.
|
|
*/
|
|
if (bond_is_active_slave(slave))
|
|
bond_validate_arp(bond, slave, sip, tip);
|
|
else
|
|
bond_validate_arp(bond, slave, tip, sip);
|
|
|
|
out_unlock:
|
|
read_unlock(&bond->lock);
|
|
}
|
|
|
|
/*
|
|
* this function is called regularly to monitor each slave's link
|
|
* ensuring that traffic is being sent and received when arp monitoring
|
|
* is used in load-balancing mode. if the adapter has been dormant, then an
|
|
* arp is transmitted to generate traffic. see activebackup_arp_monitor for
|
|
* arp monitoring in active backup mode.
|
|
*/
|
|
void bond_loadbalance_arp_mon(struct work_struct *work)
|
|
{
|
|
struct bonding *bond = container_of(work, struct bonding,
|
|
arp_work.work);
|
|
struct slave *slave, *oldcurrent;
|
|
int do_failover = 0;
|
|
int delta_in_ticks;
|
|
int i;
|
|
|
|
read_lock(&bond->lock);
|
|
|
|
delta_in_ticks = msecs_to_jiffies(bond->params.arp_interval);
|
|
|
|
if (bond->slave_cnt == 0)
|
|
goto re_arm;
|
|
|
|
read_lock(&bond->curr_slave_lock);
|
|
oldcurrent = bond->curr_active_slave;
|
|
read_unlock(&bond->curr_slave_lock);
|
|
|
|
/* see if any of the previous devices are up now (i.e. they have
|
|
* xmt and rcv traffic). the curr_active_slave does not come into
|
|
* the picture unless it is null. also, slave->jiffies is not needed
|
|
* here because we send an arp on each slave and give a slave as
|
|
* long as it needs to get the tx/rx within the delta.
|
|
* TODO: what about up/down delay in arp mode? it wasn't here before
|
|
* so it can wait
|
|
*/
|
|
bond_for_each_slave(bond, slave, i) {
|
|
unsigned long trans_start = dev_trans_start(slave->dev);
|
|
|
|
if (slave->link != BOND_LINK_UP) {
|
|
if (time_in_range(jiffies,
|
|
trans_start - delta_in_ticks,
|
|
trans_start + delta_in_ticks) &&
|
|
time_in_range(jiffies,
|
|
slave->dev->last_rx - delta_in_ticks,
|
|
slave->dev->last_rx + delta_in_ticks)) {
|
|
|
|
slave->link = BOND_LINK_UP;
|
|
bond_set_active_slave(slave);
|
|
|
|
/* primary_slave has no meaning in round-robin
|
|
* mode. the window of a slave being up and
|
|
* curr_active_slave being null after enslaving
|
|
* is closed.
|
|
*/
|
|
if (!oldcurrent) {
|
|
pr_info("%s: link status definitely up for interface %s, ",
|
|
bond->dev->name,
|
|
slave->dev->name);
|
|
do_failover = 1;
|
|
} else {
|
|
pr_info("%s: interface %s is now up\n",
|
|
bond->dev->name,
|
|
slave->dev->name);
|
|
}
|
|
}
|
|
} else {
|
|
/* slave->link == BOND_LINK_UP */
|
|
|
|
/* not all switches will respond to an arp request
|
|
* when the source ip is 0, so don't take the link down
|
|
* if we don't know our ip yet
|
|
*/
|
|
if (!time_in_range(jiffies,
|
|
trans_start - delta_in_ticks,
|
|
trans_start + 2 * delta_in_ticks) ||
|
|
!time_in_range(jiffies,
|
|
slave->dev->last_rx - delta_in_ticks,
|
|
slave->dev->last_rx + 2 * delta_in_ticks)) {
|
|
|
|
slave->link = BOND_LINK_DOWN;
|
|
bond_set_backup_slave(slave);
|
|
|
|
if (slave->link_failure_count < UINT_MAX)
|
|
slave->link_failure_count++;
|
|
|
|
pr_info("%s: interface %s is now down.\n",
|
|
bond->dev->name,
|
|
slave->dev->name);
|
|
|
|
if (slave == oldcurrent)
|
|
do_failover = 1;
|
|
}
|
|
}
|
|
|
|
/* note: if switch is in round-robin mode, all links
|
|
* must tx arp to ensure all links rx an arp - otherwise
|
|
* links may oscillate or not come up at all; if switch is
|
|
* in something like xor mode, there is nothing we can
|
|
* do - all replies will be rx'ed on same link causing slaves
|
|
* to be unstable during low/no traffic periods
|
|
*/
|
|
if (IS_UP(slave->dev))
|
|
bond_arp_send_all(bond, slave);
|
|
}
|
|
|
|
if (do_failover) {
|
|
block_netpoll_tx();
|
|
write_lock_bh(&bond->curr_slave_lock);
|
|
|
|
bond_select_active_slave(bond);
|
|
|
|
write_unlock_bh(&bond->curr_slave_lock);
|
|
unblock_netpoll_tx();
|
|
}
|
|
|
|
re_arm:
|
|
if (bond->params.arp_interval)
|
|
queue_delayed_work(bond->wq, &bond->arp_work, delta_in_ticks);
|
|
|
|
read_unlock(&bond->lock);
|
|
}
|
|
|
|
/*
|
|
* Called to inspect slaves for active-backup mode ARP monitor link state
|
|
* changes. Sets new_link in slaves to specify what action should take
|
|
* place for the slave. Returns 0 if no changes are found, >0 if changes
|
|
* to link states must be committed.
|
|
*
|
|
* Called with bond->lock held for read.
|
|
*/
|
|
static int bond_ab_arp_inspect(struct bonding *bond, int delta_in_ticks)
|
|
{
|
|
struct slave *slave;
|
|
int i, commit = 0;
|
|
unsigned long trans_start;
|
|
|
|
bond_for_each_slave(bond, slave, i) {
|
|
slave->new_link = BOND_LINK_NOCHANGE;
|
|
|
|
if (slave->link != BOND_LINK_UP) {
|
|
if (time_in_range(jiffies,
|
|
slave_last_rx(bond, slave) - delta_in_ticks,
|
|
slave_last_rx(bond, slave) + delta_in_ticks)) {
|
|
|
|
slave->new_link = BOND_LINK_UP;
|
|
commit++;
|
|
}
|
|
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* Give slaves 2*delta after being enslaved or made
|
|
* active. This avoids bouncing, as the last receive
|
|
* times need a full ARP monitor cycle to be updated.
|
|
*/
|
|
if (time_in_range(jiffies,
|
|
slave->jiffies - delta_in_ticks,
|
|
slave->jiffies + 2 * delta_in_ticks))
|
|
continue;
|
|
|
|
/*
|
|
* Backup slave is down if:
|
|
* - No current_arp_slave AND
|
|
* - more than 3*delta since last receive AND
|
|
* - the bond has an IP address
|
|
*
|
|
* Note: a non-null current_arp_slave indicates
|
|
* the curr_active_slave went down and we are
|
|
* searching for a new one; under this condition
|
|
* we only take the curr_active_slave down - this
|
|
* gives each slave a chance to tx/rx traffic
|
|
* before being taken out
|
|
*/
|
|
if (!bond_is_active_slave(slave) &&
|
|
!bond->current_arp_slave &&
|
|
!time_in_range(jiffies,
|
|
slave_last_rx(bond, slave) - delta_in_ticks,
|
|
slave_last_rx(bond, slave) + 3 * delta_in_ticks)) {
|
|
|
|
slave->new_link = BOND_LINK_DOWN;
|
|
commit++;
|
|
}
|
|
|
|
/*
|
|
* Active slave is down if:
|
|
* - more than 2*delta since transmitting OR
|
|
* - (more than 2*delta since receive AND
|
|
* the bond has an IP address)
|
|
*/
|
|
trans_start = dev_trans_start(slave->dev);
|
|
if (bond_is_active_slave(slave) &&
|
|
(!time_in_range(jiffies,
|
|
trans_start - delta_in_ticks,
|
|
trans_start + 2 * delta_in_ticks) ||
|
|
!time_in_range(jiffies,
|
|
slave_last_rx(bond, slave) - delta_in_ticks,
|
|
slave_last_rx(bond, slave) + 2 * delta_in_ticks))) {
|
|
|
|
slave->new_link = BOND_LINK_DOWN;
|
|
commit++;
|
|
}
|
|
}
|
|
|
|
return commit;
|
|
}
|
|
|
|
/*
|
|
* Called to commit link state changes noted by inspection step of
|
|
* active-backup mode ARP monitor.
|
|
*
|
|
* Called with RTNL and bond->lock for read.
|
|
*/
|
|
static void bond_ab_arp_commit(struct bonding *bond, int delta_in_ticks)
|
|
{
|
|
struct slave *slave;
|
|
int i;
|
|
unsigned long trans_start;
|
|
|
|
bond_for_each_slave(bond, slave, i) {
|
|
switch (slave->new_link) {
|
|
case BOND_LINK_NOCHANGE:
|
|
continue;
|
|
|
|
case BOND_LINK_UP:
|
|
trans_start = dev_trans_start(slave->dev);
|
|
if ((!bond->curr_active_slave &&
|
|
time_in_range(jiffies,
|
|
trans_start - delta_in_ticks,
|
|
trans_start + delta_in_ticks)) ||
|
|
bond->curr_active_slave != slave) {
|
|
slave->link = BOND_LINK_UP;
|
|
bond->current_arp_slave = NULL;
|
|
|
|
pr_info("%s: link status definitely up for interface %s.\n",
|
|
bond->dev->name, slave->dev->name);
|
|
|
|
if (!bond->curr_active_slave ||
|
|
(slave == bond->primary_slave))
|
|
goto do_failover;
|
|
|
|
}
|
|
|
|
continue;
|
|
|
|
case BOND_LINK_DOWN:
|
|
if (slave->link_failure_count < UINT_MAX)
|
|
slave->link_failure_count++;
|
|
|
|
slave->link = BOND_LINK_DOWN;
|
|
bond_set_slave_inactive_flags(slave);
|
|
|
|
pr_info("%s: link status definitely down for interface %s, disabling it\n",
|
|
bond->dev->name, slave->dev->name);
|
|
|
|
if (slave == bond->curr_active_slave) {
|
|
bond->current_arp_slave = NULL;
|
|
goto do_failover;
|
|
}
|
|
|
|
continue;
|
|
|
|
default:
|
|
pr_err("%s: impossible: new_link %d on slave %s\n",
|
|
bond->dev->name, slave->new_link,
|
|
slave->dev->name);
|
|
continue;
|
|
}
|
|
|
|
do_failover:
|
|
ASSERT_RTNL();
|
|
block_netpoll_tx();
|
|
write_lock_bh(&bond->curr_slave_lock);
|
|
bond_select_active_slave(bond);
|
|
write_unlock_bh(&bond->curr_slave_lock);
|
|
unblock_netpoll_tx();
|
|
}
|
|
|
|
bond_set_carrier(bond);
|
|
}
|
|
|
|
/*
|
|
* Send ARP probes for active-backup mode ARP monitor.
|
|
*
|
|
* Called with bond->lock held for read.
|
|
*/
|
|
static void bond_ab_arp_probe(struct bonding *bond)
|
|
{
|
|
struct slave *slave;
|
|
int i;
|
|
|
|
read_lock(&bond->curr_slave_lock);
|
|
|
|
if (bond->current_arp_slave && bond->curr_active_slave)
|
|
pr_info("PROBE: c_arp %s && cas %s BAD\n",
|
|
bond->current_arp_slave->dev->name,
|
|
bond->curr_active_slave->dev->name);
|
|
|
|
if (bond->curr_active_slave) {
|
|
bond_arp_send_all(bond, bond->curr_active_slave);
|
|
read_unlock(&bond->curr_slave_lock);
|
|
return;
|
|
}
|
|
|
|
read_unlock(&bond->curr_slave_lock);
|
|
|
|
/* if we don't have a curr_active_slave, search for the next available
|
|
* backup slave from the current_arp_slave and make it the candidate
|
|
* for becoming the curr_active_slave
|
|
*/
|
|
|
|
if (!bond->current_arp_slave) {
|
|
bond->current_arp_slave = bond->first_slave;
|
|
if (!bond->current_arp_slave)
|
|
return;
|
|
}
|
|
|
|
bond_set_slave_inactive_flags(bond->current_arp_slave);
|
|
|
|
/* search for next candidate */
|
|
bond_for_each_slave_from(bond, slave, i, bond->current_arp_slave->next) {
|
|
if (IS_UP(slave->dev)) {
|
|
slave->link = BOND_LINK_BACK;
|
|
bond_set_slave_active_flags(slave);
|
|
bond_arp_send_all(bond, slave);
|
|
slave->jiffies = jiffies;
|
|
bond->current_arp_slave = slave;
|
|
break;
|
|
}
|
|
|
|
/* if the link state is up at this point, we
|
|
* mark it down - this can happen if we have
|
|
* simultaneous link failures and
|
|
* reselect_active_interface doesn't make this
|
|
* one the current slave so it is still marked
|
|
* up when it is actually down
|
|
*/
|
|
if (slave->link == BOND_LINK_UP) {
|
|
slave->link = BOND_LINK_DOWN;
|
|
if (slave->link_failure_count < UINT_MAX)
|
|
slave->link_failure_count++;
|
|
|
|
bond_set_slave_inactive_flags(slave);
|
|
|
|
pr_info("%s: backup interface %s is now down.\n",
|
|
bond->dev->name, slave->dev->name);
|
|
}
|
|
}
|
|
}
|
|
|
|
void bond_activebackup_arp_mon(struct work_struct *work)
|
|
{
|
|
struct bonding *bond = container_of(work, struct bonding,
|
|
arp_work.work);
|
|
bool should_notify_peers = false;
|
|
int delta_in_ticks;
|
|
|
|
read_lock(&bond->lock);
|
|
|
|
delta_in_ticks = msecs_to_jiffies(bond->params.arp_interval);
|
|
|
|
if (bond->slave_cnt == 0)
|
|
goto re_arm;
|
|
|
|
should_notify_peers = bond_should_notify_peers(bond);
|
|
|
|
if (bond_ab_arp_inspect(bond, delta_in_ticks)) {
|
|
read_unlock(&bond->lock);
|
|
|
|
/* Race avoidance with bond_close flush of workqueue */
|
|
if (!rtnl_trylock()) {
|
|
read_lock(&bond->lock);
|
|
delta_in_ticks = 1;
|
|
should_notify_peers = false;
|
|
goto re_arm;
|
|
}
|
|
|
|
read_lock(&bond->lock);
|
|
|
|
bond_ab_arp_commit(bond, delta_in_ticks);
|
|
|
|
read_unlock(&bond->lock);
|
|
rtnl_unlock();
|
|
read_lock(&bond->lock);
|
|
}
|
|
|
|
bond_ab_arp_probe(bond);
|
|
|
|
re_arm:
|
|
if (bond->params.arp_interval)
|
|
queue_delayed_work(bond->wq, &bond->arp_work, delta_in_ticks);
|
|
|
|
read_unlock(&bond->lock);
|
|
|
|
if (should_notify_peers) {
|
|
if (!rtnl_trylock()) {
|
|
read_lock(&bond->lock);
|
|
bond->send_peer_notif++;
|
|
read_unlock(&bond->lock);
|
|
return;
|
|
}
|
|
netdev_bonding_change(bond->dev, NETDEV_NOTIFY_PEERS);
|
|
rtnl_unlock();
|
|
}
|
|
}
|
|
|
|
/*-------------------------- netdev event handling --------------------------*/
|
|
|
|
/*
|
|
* Change device name
|
|
*/
|
|
static int bond_event_changename(struct bonding *bond)
|
|
{
|
|
bond_remove_proc_entry(bond);
|
|
bond_create_proc_entry(bond);
|
|
|
|
bond_debug_reregister(bond);
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static int bond_master_netdev_event(unsigned long event,
|
|
struct net_device *bond_dev)
|
|
{
|
|
struct bonding *event_bond = netdev_priv(bond_dev);
|
|
|
|
switch (event) {
|
|
case NETDEV_CHANGENAME:
|
|
return bond_event_changename(event_bond);
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static int bond_slave_netdev_event(unsigned long event,
|
|
struct net_device *slave_dev)
|
|
{
|
|
struct net_device *bond_dev = slave_dev->master;
|
|
struct bonding *bond = netdev_priv(bond_dev);
|
|
struct slave *slave = NULL;
|
|
|
|
switch (event) {
|
|
case NETDEV_UNREGISTER:
|
|
if (bond_dev) {
|
|
if (bond->setup_by_slave)
|
|
bond_release_and_destroy(bond_dev, slave_dev);
|
|
else
|
|
bond_release(bond_dev, slave_dev);
|
|
}
|
|
break;
|
|
case NETDEV_UP:
|
|
case NETDEV_CHANGE:
|
|
slave = bond_get_slave_by_dev(bond, slave_dev);
|
|
if (slave) {
|
|
u32 old_speed = slave->speed;
|
|
u8 old_duplex = slave->duplex;
|
|
|
|
bond_update_speed_duplex(slave);
|
|
|
|
if (bond->params.mode == BOND_MODE_8023AD) {
|
|
if (old_speed != slave->speed)
|
|
bond_3ad_adapter_speed_changed(slave);
|
|
if (old_duplex != slave->duplex)
|
|
bond_3ad_adapter_duplex_changed(slave);
|
|
}
|
|
}
|
|
|
|
break;
|
|
case NETDEV_DOWN:
|
|
/*
|
|
* ... Or is it this?
|
|
*/
|
|
break;
|
|
case NETDEV_CHANGEMTU:
|
|
/*
|
|
* TODO: Should slaves be allowed to
|
|
* independently alter their MTU? For
|
|
* an active-backup bond, slaves need
|
|
* not be the same type of device, so
|
|
* MTUs may vary. For other modes,
|
|
* slaves arguably should have the
|
|
* same MTUs. To do this, we'd need to
|
|
* take over the slave's change_mtu
|
|
* function for the duration of their
|
|
* servitude.
|
|
*/
|
|
break;
|
|
case NETDEV_CHANGENAME:
|
|
/*
|
|
* TODO: handle changing the primary's name
|
|
*/
|
|
break;
|
|
case NETDEV_FEAT_CHANGE:
|
|
bond_compute_features(bond);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
/*
|
|
* bond_netdev_event: handle netdev notifier chain events.
|
|
*
|
|
* This function receives events for the netdev chain. The caller (an
|
|
* ioctl handler calling blocking_notifier_call_chain) holds the necessary
|
|
* locks for us to safely manipulate the slave devices (RTNL lock,
|
|
* dev_probe_lock).
|
|
*/
|
|
static int bond_netdev_event(struct notifier_block *this,
|
|
unsigned long event, void *ptr)
|
|
{
|
|
struct net_device *event_dev = (struct net_device *)ptr;
|
|
|
|
pr_debug("event_dev: %s, event: %lx\n",
|
|
event_dev ? event_dev->name : "None",
|
|
event);
|
|
|
|
if (!(event_dev->priv_flags & IFF_BONDING))
|
|
return NOTIFY_DONE;
|
|
|
|
if (event_dev->flags & IFF_MASTER) {
|
|
pr_debug("IFF_MASTER\n");
|
|
return bond_master_netdev_event(event, event_dev);
|
|
}
|
|
|
|
if (event_dev->flags & IFF_SLAVE) {
|
|
pr_debug("IFF_SLAVE\n");
|
|
return bond_slave_netdev_event(event, event_dev);
|
|
}
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
/*
|
|
* bond_inetaddr_event: handle inetaddr notifier chain events.
|
|
*
|
|
* We keep track of device IPs primarily to use as source addresses in
|
|
* ARP monitor probes (rather than spewing out broadcasts all the time).
|
|
*
|
|
* We track one IP for the main device (if it has one), plus one per VLAN.
|
|
*/
|
|
static int bond_inetaddr_event(struct notifier_block *this, unsigned long event, void *ptr)
|
|
{
|
|
struct in_ifaddr *ifa = ptr;
|
|
struct net_device *vlan_dev, *event_dev = ifa->ifa_dev->dev;
|
|
struct bond_net *bn = net_generic(dev_net(event_dev), bond_net_id);
|
|
struct bonding *bond;
|
|
struct vlan_entry *vlan;
|
|
|
|
list_for_each_entry(bond, &bn->dev_list, bond_list) {
|
|
if (bond->dev == event_dev) {
|
|
switch (event) {
|
|
case NETDEV_UP:
|
|
bond->master_ip = ifa->ifa_local;
|
|
return NOTIFY_OK;
|
|
case NETDEV_DOWN:
|
|
bond->master_ip = bond_glean_dev_ip(bond->dev);
|
|
return NOTIFY_OK;
|
|
default:
|
|
return NOTIFY_DONE;
|
|
}
|
|
}
|
|
|
|
list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
|
|
vlan_dev = __vlan_find_dev_deep(bond->dev,
|
|
vlan->vlan_id);
|
|
if (vlan_dev == event_dev) {
|
|
switch (event) {
|
|
case NETDEV_UP:
|
|
vlan->vlan_ip = ifa->ifa_local;
|
|
return NOTIFY_OK;
|
|
case NETDEV_DOWN:
|
|
vlan->vlan_ip =
|
|
bond_glean_dev_ip(vlan_dev);
|
|
return NOTIFY_OK;
|
|
default:
|
|
return NOTIFY_DONE;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static struct notifier_block bond_netdev_notifier = {
|
|
.notifier_call = bond_netdev_event,
|
|
};
|
|
|
|
static struct notifier_block bond_inetaddr_notifier = {
|
|
.notifier_call = bond_inetaddr_event,
|
|
};
|
|
|
|
/*---------------------------- Hashing Policies -----------------------------*/
|
|
|
|
/*
|
|
* Hash for the output device based upon layer 2 and layer 3 data. If
|
|
* the packet is not IP mimic bond_xmit_hash_policy_l2()
|
|
*/
|
|
static int bond_xmit_hash_policy_l23(struct sk_buff *skb, int count)
|
|
{
|
|
struct ethhdr *data = (struct ethhdr *)skb->data;
|
|
struct iphdr *iph = ip_hdr(skb);
|
|
|
|
if (skb->protocol == htons(ETH_P_IP)) {
|
|
return ((ntohl(iph->saddr ^ iph->daddr) & 0xffff) ^
|
|
(data->h_dest[5] ^ data->h_source[5])) % count;
|
|
}
|
|
|
|
return (data->h_dest[5] ^ data->h_source[5]) % count;
|
|
}
|
|
|
|
/*
|
|
* Hash for the output device based upon layer 3 and layer 4 data. If
|
|
* the packet is a frag or not TCP or UDP, just use layer 3 data. If it is
|
|
* altogether not IP, mimic bond_xmit_hash_policy_l2()
|
|
*/
|
|
static int bond_xmit_hash_policy_l34(struct sk_buff *skb, int count)
|
|
{
|
|
struct ethhdr *data = (struct ethhdr *)skb->data;
|
|
struct iphdr *iph = ip_hdr(skb);
|
|
__be16 *layer4hdr = (__be16 *)((u32 *)iph + iph->ihl);
|
|
int layer4_xor = 0;
|
|
|
|
if (skb->protocol == htons(ETH_P_IP)) {
|
|
if (!ip_is_fragment(iph) &&
|
|
(iph->protocol == IPPROTO_TCP ||
|
|
iph->protocol == IPPROTO_UDP)) {
|
|
layer4_xor = ntohs((*layer4hdr ^ *(layer4hdr + 1)));
|
|
}
|
|
return (layer4_xor ^
|
|
((ntohl(iph->saddr ^ iph->daddr)) & 0xffff)) % count;
|
|
|
|
}
|
|
|
|
return (data->h_dest[5] ^ data->h_source[5]) % count;
|
|
}
|
|
|
|
/*
|
|
* Hash for the output device based upon layer 2 data
|
|
*/
|
|
static int bond_xmit_hash_policy_l2(struct sk_buff *skb, int count)
|
|
{
|
|
struct ethhdr *data = (struct ethhdr *)skb->data;
|
|
|
|
return (data->h_dest[5] ^ data->h_source[5]) % count;
|
|
}
|
|
|
|
/*-------------------------- Device entry points ----------------------------*/
|
|
|
|
static int bond_open(struct net_device *bond_dev)
|
|
{
|
|
struct bonding *bond = netdev_priv(bond_dev);
|
|
struct slave *slave;
|
|
int i;
|
|
|
|
/* reset slave->backup and slave->inactive */
|
|
read_lock(&bond->lock);
|
|
if (bond->slave_cnt > 0) {
|
|
read_lock(&bond->curr_slave_lock);
|
|
bond_for_each_slave(bond, slave, i) {
|
|
if ((bond->params.mode == BOND_MODE_ACTIVEBACKUP)
|
|
&& (slave != bond->curr_active_slave)) {
|
|
bond_set_slave_inactive_flags(slave);
|
|
} else {
|
|
bond_set_slave_active_flags(slave);
|
|
}
|
|
}
|
|
read_unlock(&bond->curr_slave_lock);
|
|
}
|
|
read_unlock(&bond->lock);
|
|
|
|
INIT_DELAYED_WORK(&bond->mcast_work, bond_resend_igmp_join_requests_delayed);
|
|
|
|
if (bond_is_lb(bond)) {
|
|
/* bond_alb_initialize must be called before the timer
|
|
* is started.
|
|
*/
|
|
if (bond_alb_initialize(bond, (bond->params.mode == BOND_MODE_ALB))) {
|
|
/* something went wrong - fail the open operation */
|
|
return -ENOMEM;
|
|
}
|
|
|
|
INIT_DELAYED_WORK(&bond->alb_work, bond_alb_monitor);
|
|
queue_delayed_work(bond->wq, &bond->alb_work, 0);
|
|
}
|
|
|
|
if (bond->params.miimon) { /* link check interval, in milliseconds. */
|
|
INIT_DELAYED_WORK(&bond->mii_work, bond_mii_monitor);
|
|
queue_delayed_work(bond->wq, &bond->mii_work, 0);
|
|
}
|
|
|
|
if (bond->params.arp_interval) { /* arp interval, in milliseconds. */
|
|
if (bond->params.mode == BOND_MODE_ACTIVEBACKUP)
|
|
INIT_DELAYED_WORK(&bond->arp_work,
|
|
bond_activebackup_arp_mon);
|
|
else
|
|
INIT_DELAYED_WORK(&bond->arp_work,
|
|
bond_loadbalance_arp_mon);
|
|
|
|
queue_delayed_work(bond->wq, &bond->arp_work, 0);
|
|
if (bond->params.arp_validate)
|
|
bond->recv_probe = bond_arp_rcv;
|
|
}
|
|
|
|
if (bond->params.mode == BOND_MODE_8023AD) {
|
|
INIT_DELAYED_WORK(&bond->ad_work, bond_3ad_state_machine_handler);
|
|
queue_delayed_work(bond->wq, &bond->ad_work, 0);
|
|
/* register to receive LACPDUs */
|
|
bond->recv_probe = bond_3ad_lacpdu_recv;
|
|
bond_3ad_initiate_agg_selection(bond, 1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bond_close(struct net_device *bond_dev)
|
|
{
|
|
struct bonding *bond = netdev_priv(bond_dev);
|
|
|
|
write_lock_bh(&bond->lock);
|
|
|
|
bond->send_peer_notif = 0;
|
|
|
|
write_unlock_bh(&bond->lock);
|
|
|
|
if (bond->params.miimon) { /* link check interval, in milliseconds. */
|
|
cancel_delayed_work_sync(&bond->mii_work);
|
|
}
|
|
|
|
if (bond->params.arp_interval) { /* arp interval, in milliseconds. */
|
|
cancel_delayed_work_sync(&bond->arp_work);
|
|
}
|
|
|
|
switch (bond->params.mode) {
|
|
case BOND_MODE_8023AD:
|
|
cancel_delayed_work_sync(&bond->ad_work);
|
|
break;
|
|
case BOND_MODE_TLB:
|
|
case BOND_MODE_ALB:
|
|
cancel_delayed_work_sync(&bond->alb_work);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (delayed_work_pending(&bond->mcast_work))
|
|
cancel_delayed_work_sync(&bond->mcast_work);
|
|
|
|
if (bond_is_lb(bond)) {
|
|
/* Must be called only after all
|
|
* slaves have been released
|
|
*/
|
|
bond_alb_deinitialize(bond);
|
|
}
|
|
bond->recv_probe = NULL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct rtnl_link_stats64 *bond_get_stats(struct net_device *bond_dev,
|
|
struct rtnl_link_stats64 *stats)
|
|
{
|
|
struct bonding *bond = netdev_priv(bond_dev);
|
|
struct rtnl_link_stats64 temp;
|
|
struct slave *slave;
|
|
int i;
|
|
|
|
memset(stats, 0, sizeof(*stats));
|
|
|
|
read_lock_bh(&bond->lock);
|
|
|
|
bond_for_each_slave(bond, slave, i) {
|
|
const struct rtnl_link_stats64 *sstats =
|
|
dev_get_stats(slave->dev, &temp);
|
|
|
|
stats->rx_packets += sstats->rx_packets;
|
|
stats->rx_bytes += sstats->rx_bytes;
|
|
stats->rx_errors += sstats->rx_errors;
|
|
stats->rx_dropped += sstats->rx_dropped;
|
|
|
|
stats->tx_packets += sstats->tx_packets;
|
|
stats->tx_bytes += sstats->tx_bytes;
|
|
stats->tx_errors += sstats->tx_errors;
|
|
stats->tx_dropped += sstats->tx_dropped;
|
|
|
|
stats->multicast += sstats->multicast;
|
|
stats->collisions += sstats->collisions;
|
|
|
|
stats->rx_length_errors += sstats->rx_length_errors;
|
|
stats->rx_over_errors += sstats->rx_over_errors;
|
|
stats->rx_crc_errors += sstats->rx_crc_errors;
|
|
stats->rx_frame_errors += sstats->rx_frame_errors;
|
|
stats->rx_fifo_errors += sstats->rx_fifo_errors;
|
|
stats->rx_missed_errors += sstats->rx_missed_errors;
|
|
|
|
stats->tx_aborted_errors += sstats->tx_aborted_errors;
|
|
stats->tx_carrier_errors += sstats->tx_carrier_errors;
|
|
stats->tx_fifo_errors += sstats->tx_fifo_errors;
|
|
stats->tx_heartbeat_errors += sstats->tx_heartbeat_errors;
|
|
stats->tx_window_errors += sstats->tx_window_errors;
|
|
}
|
|
|
|
read_unlock_bh(&bond->lock);
|
|
|
|
return stats;
|
|
}
|
|
|
|
static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd)
|
|
{
|
|
struct net_device *slave_dev = NULL;
|
|
struct ifbond k_binfo;
|
|
struct ifbond __user *u_binfo = NULL;
|
|
struct ifslave k_sinfo;
|
|
struct ifslave __user *u_sinfo = NULL;
|
|
struct mii_ioctl_data *mii = NULL;
|
|
int res = 0;
|
|
|
|
pr_debug("bond_ioctl: master=%s, cmd=%d\n", bond_dev->name, cmd);
|
|
|
|
switch (cmd) {
|
|
case SIOCGMIIPHY:
|
|
mii = if_mii(ifr);
|
|
if (!mii)
|
|
return -EINVAL;
|
|
|
|
mii->phy_id = 0;
|
|
/* Fall Through */
|
|
case SIOCGMIIREG:
|
|
/*
|
|
* We do this again just in case we were called by SIOCGMIIREG
|
|
* instead of SIOCGMIIPHY.
|
|
*/
|
|
mii = if_mii(ifr);
|
|
if (!mii)
|
|
return -EINVAL;
|
|
|
|
|
|
if (mii->reg_num == 1) {
|
|
struct bonding *bond = netdev_priv(bond_dev);
|
|
mii->val_out = 0;
|
|
read_lock(&bond->lock);
|
|
read_lock(&bond->curr_slave_lock);
|
|
if (netif_carrier_ok(bond->dev))
|
|
mii->val_out = BMSR_LSTATUS;
|
|
|
|
read_unlock(&bond->curr_slave_lock);
|
|
read_unlock(&bond->lock);
|
|
}
|
|
|
|
return 0;
|
|
case BOND_INFO_QUERY_OLD:
|
|
case SIOCBONDINFOQUERY:
|
|
u_binfo = (struct ifbond __user *)ifr->ifr_data;
|
|
|
|
if (copy_from_user(&k_binfo, u_binfo, sizeof(ifbond)))
|
|
return -EFAULT;
|
|
|
|
res = bond_info_query(bond_dev, &k_binfo);
|
|
if (res == 0 &&
|
|
copy_to_user(u_binfo, &k_binfo, sizeof(ifbond)))
|
|
return -EFAULT;
|
|
|
|
return res;
|
|
case BOND_SLAVE_INFO_QUERY_OLD:
|
|
case SIOCBONDSLAVEINFOQUERY:
|
|
u_sinfo = (struct ifslave __user *)ifr->ifr_data;
|
|
|
|
if (copy_from_user(&k_sinfo, u_sinfo, sizeof(ifslave)))
|
|
return -EFAULT;
|
|
|
|
res = bond_slave_info_query(bond_dev, &k_sinfo);
|
|
if (res == 0 &&
|
|
copy_to_user(u_sinfo, &k_sinfo, sizeof(ifslave)))
|
|
return -EFAULT;
|
|
|
|
return res;
|
|
default:
|
|
/* Go on */
|
|
break;
|
|
}
|
|
|
|
if (!capable(CAP_NET_ADMIN))
|
|
return -EPERM;
|
|
|
|
slave_dev = dev_get_by_name(dev_net(bond_dev), ifr->ifr_slave);
|
|
|
|
pr_debug("slave_dev=%p:\n", slave_dev);
|
|
|
|
if (!slave_dev)
|
|
res = -ENODEV;
|
|
else {
|
|
pr_debug("slave_dev->name=%s:\n", slave_dev->name);
|
|
switch (cmd) {
|
|
case BOND_ENSLAVE_OLD:
|
|
case SIOCBONDENSLAVE:
|
|
res = bond_enslave(bond_dev, slave_dev);
|
|
break;
|
|
case BOND_RELEASE_OLD:
|
|
case SIOCBONDRELEASE:
|
|
res = bond_release(bond_dev, slave_dev);
|
|
break;
|
|
case BOND_SETHWADDR_OLD:
|
|
case SIOCBONDSETHWADDR:
|
|
res = bond_sethwaddr(bond_dev, slave_dev);
|
|
break;
|
|
case BOND_CHANGE_ACTIVE_OLD:
|
|
case SIOCBONDCHANGEACTIVE:
|
|
res = bond_ioctl_change_active(bond_dev, slave_dev);
|
|
break;
|
|
default:
|
|
res = -EOPNOTSUPP;
|
|
}
|
|
|
|
dev_put(slave_dev);
|
|
}
|
|
|
|
return res;
|
|
}
|
|
|
|
static bool bond_addr_in_mc_list(unsigned char *addr,
|
|
struct netdev_hw_addr_list *list,
|
|
int addrlen)
|
|
{
|
|
struct netdev_hw_addr *ha;
|
|
|
|
netdev_hw_addr_list_for_each(ha, list)
|
|
if (!memcmp(ha->addr, addr, addrlen))
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
static void bond_change_rx_flags(struct net_device *bond_dev, int change)
|
|
{
|
|
struct bonding *bond = netdev_priv(bond_dev);
|
|
|
|
if (change & IFF_PROMISC)
|
|
bond_set_promiscuity(bond,
|
|
bond_dev->flags & IFF_PROMISC ? 1 : -1);
|
|
|
|
if (change & IFF_ALLMULTI)
|
|
bond_set_allmulti(bond,
|
|
bond_dev->flags & IFF_ALLMULTI ? 1 : -1);
|
|
}
|
|
|
|
static void bond_set_multicast_list(struct net_device *bond_dev)
|
|
{
|
|
struct bonding *bond = netdev_priv(bond_dev);
|
|
struct netdev_hw_addr *ha;
|
|
bool found;
|
|
|
|
read_lock(&bond->lock);
|
|
|
|
/* looking for addresses to add to slaves' mc list */
|
|
netdev_for_each_mc_addr(ha, bond_dev) {
|
|
found = bond_addr_in_mc_list(ha->addr, &bond->mc_list,
|
|
bond_dev->addr_len);
|
|
if (!found)
|
|
bond_mc_add(bond, ha->addr);
|
|
}
|
|
|
|
/* looking for addresses to delete from slaves' list */
|
|
netdev_hw_addr_list_for_each(ha, &bond->mc_list) {
|
|
found = bond_addr_in_mc_list(ha->addr, &bond_dev->mc,
|
|
bond_dev->addr_len);
|
|
if (!found)
|
|
bond_mc_del(bond, ha->addr);
|
|
}
|
|
|
|
/* save master's multicast list */
|
|
__hw_addr_flush(&bond->mc_list);
|
|
__hw_addr_add_multiple(&bond->mc_list, &bond_dev->mc,
|
|
bond_dev->addr_len, NETDEV_HW_ADDR_T_MULTICAST);
|
|
|
|
read_unlock(&bond->lock);
|
|
}
|
|
|
|
static int bond_neigh_setup(struct net_device *dev, struct neigh_parms *parms)
|
|
{
|
|
struct bonding *bond = netdev_priv(dev);
|
|
struct slave *slave = bond->first_slave;
|
|
|
|
if (slave) {
|
|
const struct net_device_ops *slave_ops
|
|
= slave->dev->netdev_ops;
|
|
if (slave_ops->ndo_neigh_setup)
|
|
return slave_ops->ndo_neigh_setup(slave->dev, parms);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Change the MTU of all of a master's slaves to match the master
|
|
*/
|
|
static int bond_change_mtu(struct net_device *bond_dev, int new_mtu)
|
|
{
|
|
struct bonding *bond = netdev_priv(bond_dev);
|
|
struct slave *slave, *stop_at;
|
|
int res = 0;
|
|
int i;
|
|
|
|
pr_debug("bond=%p, name=%s, new_mtu=%d\n", bond,
|
|
(bond_dev ? bond_dev->name : "None"), new_mtu);
|
|
|
|
/* Can't hold bond->lock with bh disabled here since
|
|
* some base drivers panic. On the other hand we can't
|
|
* hold bond->lock without bh disabled because we'll
|
|
* deadlock. The only solution is to rely on the fact
|
|
* that we're under rtnl_lock here, and the slaves
|
|
* list won't change. This doesn't solve the problem
|
|
* of setting the slave's MTU while it is
|
|
* transmitting, but the assumption is that the base
|
|
* driver can handle that.
|
|
*
|
|
* TODO: figure out a way to safely iterate the slaves
|
|
* list, but without holding a lock around the actual
|
|
* call to the base driver.
|
|
*/
|
|
|
|
bond_for_each_slave(bond, slave, i) {
|
|
pr_debug("s %p s->p %p c_m %p\n",
|
|
slave,
|
|
slave->prev,
|
|
slave->dev->netdev_ops->ndo_change_mtu);
|
|
|
|
res = dev_set_mtu(slave->dev, new_mtu);
|
|
|
|
if (res) {
|
|
/* If we failed to set the slave's mtu to the new value
|
|
* we must abort the operation even in ACTIVE_BACKUP
|
|
* mode, because if we allow the backup slaves to have
|
|
* different mtu values than the active slave we'll
|
|
* need to change their mtu when doing a failover. That
|
|
* means changing their mtu from timer context, which
|
|
* is probably not a good idea.
|
|
*/
|
|
pr_debug("err %d %s\n", res, slave->dev->name);
|
|
goto unwind;
|
|
}
|
|
}
|
|
|
|
bond_dev->mtu = new_mtu;
|
|
|
|
return 0;
|
|
|
|
unwind:
|
|
/* unwind from head to the slave that failed */
|
|
stop_at = slave;
|
|
bond_for_each_slave_from_to(bond, slave, i, bond->first_slave, stop_at) {
|
|
int tmp_res;
|
|
|
|
tmp_res = dev_set_mtu(slave->dev, bond_dev->mtu);
|
|
if (tmp_res) {
|
|
pr_debug("unwind err %d dev %s\n",
|
|
tmp_res, slave->dev->name);
|
|
}
|
|
}
|
|
|
|
return res;
|
|
}
|
|
|
|
/*
|
|
* Change HW address
|
|
*
|
|
* Note that many devices must be down to change the HW address, and
|
|
* downing the master releases all slaves. We can make bonds full of
|
|
* bonding devices to test this, however.
|
|
*/
|
|
static int bond_set_mac_address(struct net_device *bond_dev, void *addr)
|
|
{
|
|
struct bonding *bond = netdev_priv(bond_dev);
|
|
struct sockaddr *sa = addr, tmp_sa;
|
|
struct slave *slave, *stop_at;
|
|
int res = 0;
|
|
int i;
|
|
|
|
if (bond->params.mode == BOND_MODE_ALB)
|
|
return bond_alb_set_mac_address(bond_dev, addr);
|
|
|
|
|
|
pr_debug("bond=%p, name=%s\n",
|
|
bond, bond_dev ? bond_dev->name : "None");
|
|
|
|
/*
|
|
* If fail_over_mac is set to active, do nothing and return
|
|
* success. Returning an error causes ifenslave to fail.
|
|
*/
|
|
if (bond->params.fail_over_mac == BOND_FOM_ACTIVE)
|
|
return 0;
|
|
|
|
if (!is_valid_ether_addr(sa->sa_data))
|
|
return -EADDRNOTAVAIL;
|
|
|
|
/* Can't hold bond->lock with bh disabled here since
|
|
* some base drivers panic. On the other hand we can't
|
|
* hold bond->lock without bh disabled because we'll
|
|
* deadlock. The only solution is to rely on the fact
|
|
* that we're under rtnl_lock here, and the slaves
|
|
* list won't change. This doesn't solve the problem
|
|
* of setting the slave's hw address while it is
|
|
* transmitting, but the assumption is that the base
|
|
* driver can handle that.
|
|
*
|
|
* TODO: figure out a way to safely iterate the slaves
|
|
* list, but without holding a lock around the actual
|
|
* call to the base driver.
|
|
*/
|
|
|
|
bond_for_each_slave(bond, slave, i) {
|
|
const struct net_device_ops *slave_ops = slave->dev->netdev_ops;
|
|
pr_debug("slave %p %s\n", slave, slave->dev->name);
|
|
|
|
if (slave_ops->ndo_set_mac_address == NULL) {
|
|
res = -EOPNOTSUPP;
|
|
pr_debug("EOPNOTSUPP %s\n", slave->dev->name);
|
|
goto unwind;
|
|
}
|
|
|
|
res = dev_set_mac_address(slave->dev, addr);
|
|
if (res) {
|
|
/* TODO: consider downing the slave
|
|
* and retry ?
|
|
* User should expect communications
|
|
* breakage anyway until ARP finish
|
|
* updating, so...
|
|
*/
|
|
pr_debug("err %d %s\n", res, slave->dev->name);
|
|
goto unwind;
|
|
}
|
|
}
|
|
|
|
/* success */
|
|
memcpy(bond_dev->dev_addr, sa->sa_data, bond_dev->addr_len);
|
|
return 0;
|
|
|
|
unwind:
|
|
memcpy(tmp_sa.sa_data, bond_dev->dev_addr, bond_dev->addr_len);
|
|
tmp_sa.sa_family = bond_dev->type;
|
|
|
|
/* unwind from head to the slave that failed */
|
|
stop_at = slave;
|
|
bond_for_each_slave_from_to(bond, slave, i, bond->first_slave, stop_at) {
|
|
int tmp_res;
|
|
|
|
tmp_res = dev_set_mac_address(slave->dev, &tmp_sa);
|
|
if (tmp_res) {
|
|
pr_debug("unwind err %d dev %s\n",
|
|
tmp_res, slave->dev->name);
|
|
}
|
|
}
|
|
|
|
return res;
|
|
}
|
|
|
|
static int bond_xmit_roundrobin(struct sk_buff *skb, struct net_device *bond_dev)
|
|
{
|
|
struct bonding *bond = netdev_priv(bond_dev);
|
|
struct slave *slave, *start_at;
|
|
int i, slave_no, res = 1;
|
|
struct iphdr *iph = ip_hdr(skb);
|
|
|
|
/*
|
|
* Start with the curr_active_slave that joined the bond as the
|
|
* default for sending IGMP traffic. For failover purposes one
|
|
* needs to maintain some consistency for the interface that will
|
|
* send the join/membership reports. The curr_active_slave found
|
|
* will send all of this type of traffic.
|
|
*/
|
|
if ((iph->protocol == IPPROTO_IGMP) &&
|
|
(skb->protocol == htons(ETH_P_IP))) {
|
|
|
|
read_lock(&bond->curr_slave_lock);
|
|
slave = bond->curr_active_slave;
|
|
read_unlock(&bond->curr_slave_lock);
|
|
|
|
if (!slave)
|
|
goto out;
|
|
} else {
|
|
/*
|
|
* Concurrent TX may collide on rr_tx_counter; we accept
|
|
* that as being rare enough not to justify using an
|
|
* atomic op here.
|
|
*/
|
|
slave_no = bond->rr_tx_counter++ % bond->slave_cnt;
|
|
|
|
bond_for_each_slave(bond, slave, i) {
|
|
slave_no--;
|
|
if (slave_no < 0)
|
|
break;
|
|
}
|
|
}
|
|
|
|
start_at = slave;
|
|
bond_for_each_slave_from(bond, slave, i, start_at) {
|
|
if (IS_UP(slave->dev) &&
|
|
(slave->link == BOND_LINK_UP) &&
|
|
bond_is_active_slave(slave)) {
|
|
res = bond_dev_queue_xmit(bond, skb, slave->dev);
|
|
break;
|
|
}
|
|
}
|
|
|
|
out:
|
|
if (res) {
|
|
/* no suitable interface, frame not sent */
|
|
dev_kfree_skb(skb);
|
|
}
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
|
|
/*
|
|
* in active-backup mode, we know that bond->curr_active_slave is always valid if
|
|
* the bond has a usable interface.
|
|
*/
|
|
static int bond_xmit_activebackup(struct sk_buff *skb, struct net_device *bond_dev)
|
|
{
|
|
struct bonding *bond = netdev_priv(bond_dev);
|
|
int res = 1;
|
|
|
|
read_lock(&bond->curr_slave_lock);
|
|
|
|
if (bond->curr_active_slave)
|
|
res = bond_dev_queue_xmit(bond, skb,
|
|
bond->curr_active_slave->dev);
|
|
|
|
if (res)
|
|
/* no suitable interface, frame not sent */
|
|
dev_kfree_skb(skb);
|
|
|
|
read_unlock(&bond->curr_slave_lock);
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
/*
|
|
* In bond_xmit_xor() , we determine the output device by using a pre-
|
|
* determined xmit_hash_policy(), If the selected device is not enabled,
|
|
* find the next active slave.
|
|
*/
|
|
static int bond_xmit_xor(struct sk_buff *skb, struct net_device *bond_dev)
|
|
{
|
|
struct bonding *bond = netdev_priv(bond_dev);
|
|
struct slave *slave, *start_at;
|
|
int slave_no;
|
|
int i;
|
|
int res = 1;
|
|
|
|
slave_no = bond->xmit_hash_policy(skb, bond->slave_cnt);
|
|
|
|
bond_for_each_slave(bond, slave, i) {
|
|
slave_no--;
|
|
if (slave_no < 0)
|
|
break;
|
|
}
|
|
|
|
start_at = slave;
|
|
|
|
bond_for_each_slave_from(bond, slave, i, start_at) {
|
|
if (IS_UP(slave->dev) &&
|
|
(slave->link == BOND_LINK_UP) &&
|
|
bond_is_active_slave(slave)) {
|
|
res = bond_dev_queue_xmit(bond, skb, slave->dev);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (res) {
|
|
/* no suitable interface, frame not sent */
|
|
dev_kfree_skb(skb);
|
|
}
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
/*
|
|
* in broadcast mode, we send everything to all usable interfaces.
|
|
*/
|
|
static int bond_xmit_broadcast(struct sk_buff *skb, struct net_device *bond_dev)
|
|
{
|
|
struct bonding *bond = netdev_priv(bond_dev);
|
|
struct slave *slave, *start_at;
|
|
struct net_device *tx_dev = NULL;
|
|
int i;
|
|
int res = 1;
|
|
|
|
read_lock(&bond->curr_slave_lock);
|
|
start_at = bond->curr_active_slave;
|
|
read_unlock(&bond->curr_slave_lock);
|
|
|
|
if (!start_at)
|
|
goto out;
|
|
|
|
bond_for_each_slave_from(bond, slave, i, start_at) {
|
|
if (IS_UP(slave->dev) &&
|
|
(slave->link == BOND_LINK_UP) &&
|
|
bond_is_active_slave(slave)) {
|
|
if (tx_dev) {
|
|
struct sk_buff *skb2 = skb_clone(skb, GFP_ATOMIC);
|
|
if (!skb2) {
|
|
pr_err("%s: Error: bond_xmit_broadcast(): skb_clone() failed\n",
|
|
bond_dev->name);
|
|
continue;
|
|
}
|
|
|
|
res = bond_dev_queue_xmit(bond, skb2, tx_dev);
|
|
if (res) {
|
|
dev_kfree_skb(skb2);
|
|
continue;
|
|
}
|
|
}
|
|
tx_dev = slave->dev;
|
|
}
|
|
}
|
|
|
|
if (tx_dev)
|
|
res = bond_dev_queue_xmit(bond, skb, tx_dev);
|
|
|
|
out:
|
|
if (res)
|
|
/* no suitable interface, frame not sent */
|
|
dev_kfree_skb(skb);
|
|
|
|
/* frame sent to all suitable interfaces */
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
/*------------------------- Device initialization ---------------------------*/
|
|
|
|
static void bond_set_xmit_hash_policy(struct bonding *bond)
|
|
{
|
|
switch (bond->params.xmit_policy) {
|
|
case BOND_XMIT_POLICY_LAYER23:
|
|
bond->xmit_hash_policy = bond_xmit_hash_policy_l23;
|
|
break;
|
|
case BOND_XMIT_POLICY_LAYER34:
|
|
bond->xmit_hash_policy = bond_xmit_hash_policy_l34;
|
|
break;
|
|
case BOND_XMIT_POLICY_LAYER2:
|
|
default:
|
|
bond->xmit_hash_policy = bond_xmit_hash_policy_l2;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Lookup the slave that corresponds to a qid
|
|
*/
|
|
static inline int bond_slave_override(struct bonding *bond,
|
|
struct sk_buff *skb)
|
|
{
|
|
int i, res = 1;
|
|
struct slave *slave = NULL;
|
|
struct slave *check_slave;
|
|
|
|
if (!skb->queue_mapping)
|
|
return 1;
|
|
|
|
/* Find out if any slaves have the same mapping as this skb. */
|
|
bond_for_each_slave(bond, check_slave, i) {
|
|
if (check_slave->queue_id == skb->queue_mapping) {
|
|
slave = check_slave;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* If the slave isn't UP, use default transmit policy. */
|
|
if (slave && slave->queue_id && IS_UP(slave->dev) &&
|
|
(slave->link == BOND_LINK_UP)) {
|
|
res = bond_dev_queue_xmit(bond, skb, slave->dev);
|
|
}
|
|
|
|
return res;
|
|
}
|
|
|
|
|
|
static u16 bond_select_queue(struct net_device *dev, struct sk_buff *skb)
|
|
{
|
|
/*
|
|
* This helper function exists to help dev_pick_tx get the correct
|
|
* destination queue. Using a helper function skips a call to
|
|
* skb_tx_hash and will put the skbs in the queue we expect on their
|
|
* way down to the bonding driver.
|
|
*/
|
|
u16 txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) : 0;
|
|
|
|
/*
|
|
* Save the original txq to restore before passing to the driver
|
|
*/
|
|
bond_queue_mapping(skb) = skb->queue_mapping;
|
|
|
|
if (unlikely(txq >= dev->real_num_tx_queues)) {
|
|
do {
|
|
txq -= dev->real_num_tx_queues;
|
|
} while (txq >= dev->real_num_tx_queues);
|
|
}
|
|
return txq;
|
|
}
|
|
|
|
static netdev_tx_t __bond_start_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct bonding *bond = netdev_priv(dev);
|
|
|
|
if (TX_QUEUE_OVERRIDE(bond->params.mode)) {
|
|
if (!bond_slave_override(bond, skb))
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
switch (bond->params.mode) {
|
|
case BOND_MODE_ROUNDROBIN:
|
|
return bond_xmit_roundrobin(skb, dev);
|
|
case BOND_MODE_ACTIVEBACKUP:
|
|
return bond_xmit_activebackup(skb, dev);
|
|
case BOND_MODE_XOR:
|
|
return bond_xmit_xor(skb, dev);
|
|
case BOND_MODE_BROADCAST:
|
|
return bond_xmit_broadcast(skb, dev);
|
|
case BOND_MODE_8023AD:
|
|
return bond_3ad_xmit_xor(skb, dev);
|
|
case BOND_MODE_ALB:
|
|
case BOND_MODE_TLB:
|
|
return bond_alb_xmit(skb, dev);
|
|
default:
|
|
/* Should never happen, mode already checked */
|
|
pr_err("%s: Error: Unknown bonding mode %d\n",
|
|
dev->name, bond->params.mode);
|
|
WARN_ON_ONCE(1);
|
|
dev_kfree_skb(skb);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
}
|
|
|
|
static netdev_tx_t bond_start_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct bonding *bond = netdev_priv(dev);
|
|
netdev_tx_t ret = NETDEV_TX_OK;
|
|
|
|
/*
|
|
* If we risk deadlock from transmitting this in the
|
|
* netpoll path, tell netpoll to queue the frame for later tx
|
|
*/
|
|
if (is_netpoll_tx_blocked(dev))
|
|
return NETDEV_TX_BUSY;
|
|
|
|
read_lock(&bond->lock);
|
|
|
|
if (bond->slave_cnt)
|
|
ret = __bond_start_xmit(skb, dev);
|
|
else
|
|
dev_kfree_skb(skb);
|
|
|
|
read_unlock(&bond->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* set bond mode specific net device operations
|
|
*/
|
|
void bond_set_mode_ops(struct bonding *bond, int mode)
|
|
{
|
|
struct net_device *bond_dev = bond->dev;
|
|
|
|
switch (mode) {
|
|
case BOND_MODE_ROUNDROBIN:
|
|
break;
|
|
case BOND_MODE_ACTIVEBACKUP:
|
|
break;
|
|
case BOND_MODE_XOR:
|
|
bond_set_xmit_hash_policy(bond);
|
|
break;
|
|
case BOND_MODE_BROADCAST:
|
|
break;
|
|
case BOND_MODE_8023AD:
|
|
bond_set_xmit_hash_policy(bond);
|
|
break;
|
|
case BOND_MODE_ALB:
|
|
/* FALLTHRU */
|
|
case BOND_MODE_TLB:
|
|
break;
|
|
default:
|
|
/* Should never happen, mode already checked */
|
|
pr_err("%s: Error: Unknown bonding mode %d\n",
|
|
bond_dev->name, mode);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void bond_ethtool_get_drvinfo(struct net_device *bond_dev,
|
|
struct ethtool_drvinfo *drvinfo)
|
|
{
|
|
strncpy(drvinfo->driver, DRV_NAME, 32);
|
|
strncpy(drvinfo->version, DRV_VERSION, 32);
|
|
snprintf(drvinfo->fw_version, 32, "%d", BOND_ABI_VERSION);
|
|
}
|
|
|
|
static const struct ethtool_ops bond_ethtool_ops = {
|
|
.get_drvinfo = bond_ethtool_get_drvinfo,
|
|
.get_link = ethtool_op_get_link,
|
|
};
|
|
|
|
static const struct net_device_ops bond_netdev_ops = {
|
|
.ndo_init = bond_init,
|
|
.ndo_uninit = bond_uninit,
|
|
.ndo_open = bond_open,
|
|
.ndo_stop = bond_close,
|
|
.ndo_start_xmit = bond_start_xmit,
|
|
.ndo_select_queue = bond_select_queue,
|
|
.ndo_get_stats64 = bond_get_stats,
|
|
.ndo_do_ioctl = bond_do_ioctl,
|
|
.ndo_change_rx_flags = bond_change_rx_flags,
|
|
.ndo_set_rx_mode = bond_set_multicast_list,
|
|
.ndo_change_mtu = bond_change_mtu,
|
|
.ndo_set_mac_address = bond_set_mac_address,
|
|
.ndo_neigh_setup = bond_neigh_setup,
|
|
.ndo_vlan_rx_add_vid = bond_vlan_rx_add_vid,
|
|
.ndo_vlan_rx_kill_vid = bond_vlan_rx_kill_vid,
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
.ndo_netpoll_setup = bond_netpoll_setup,
|
|
.ndo_netpoll_cleanup = bond_netpoll_cleanup,
|
|
.ndo_poll_controller = bond_poll_controller,
|
|
#endif
|
|
.ndo_add_slave = bond_enslave,
|
|
.ndo_del_slave = bond_release,
|
|
.ndo_fix_features = bond_fix_features,
|
|
};
|
|
|
|
static void bond_destructor(struct net_device *bond_dev)
|
|
{
|
|
struct bonding *bond = netdev_priv(bond_dev);
|
|
if (bond->wq)
|
|
destroy_workqueue(bond->wq);
|
|
free_netdev(bond_dev);
|
|
}
|
|
|
|
static void bond_setup(struct net_device *bond_dev)
|
|
{
|
|
struct bonding *bond = netdev_priv(bond_dev);
|
|
|
|
/* initialize rwlocks */
|
|
rwlock_init(&bond->lock);
|
|
rwlock_init(&bond->curr_slave_lock);
|
|
|
|
bond->params = bonding_defaults;
|
|
|
|
/* Initialize pointers */
|
|
bond->dev = bond_dev;
|
|
INIT_LIST_HEAD(&bond->vlan_list);
|
|
|
|
/* Initialize the device entry points */
|
|
ether_setup(bond_dev);
|
|
bond_dev->netdev_ops = &bond_netdev_ops;
|
|
bond_dev->ethtool_ops = &bond_ethtool_ops;
|
|
bond_set_mode_ops(bond, bond->params.mode);
|
|
|
|
bond_dev->destructor = bond_destructor;
|
|
|
|
/* Initialize the device options */
|
|
bond_dev->tx_queue_len = 0;
|
|
bond_dev->flags |= IFF_MASTER|IFF_MULTICAST;
|
|
bond_dev->priv_flags |= IFF_BONDING;
|
|
bond_dev->priv_flags &= ~(IFF_XMIT_DST_RELEASE | IFF_TX_SKB_SHARING);
|
|
|
|
/* At first, we block adding VLANs. That's the only way to
|
|
* prevent problems that occur when adding VLANs over an
|
|
* empty bond. The block will be removed once non-challenged
|
|
* slaves are enslaved.
|
|
*/
|
|
bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
|
|
|
|
/* don't acquire bond device's netif_tx_lock when
|
|
* transmitting */
|
|
bond_dev->features |= NETIF_F_LLTX;
|
|
|
|
/* By default, we declare the bond to be fully
|
|
* VLAN hardware accelerated capable. Special
|
|
* care is taken in the various xmit functions
|
|
* when there are slaves that are not hw accel
|
|
* capable
|
|
*/
|
|
|
|
bond_dev->hw_features = BOND_VLAN_FEATURES |
|
|
NETIF_F_HW_VLAN_TX |
|
|
NETIF_F_HW_VLAN_RX |
|
|
NETIF_F_HW_VLAN_FILTER;
|
|
|
|
bond_dev->hw_features &= ~(NETIF_F_ALL_CSUM & ~NETIF_F_NO_CSUM);
|
|
bond_dev->features |= bond_dev->hw_features;
|
|
}
|
|
|
|
static void bond_work_cancel_all(struct bonding *bond)
|
|
{
|
|
if (bond->params.miimon && delayed_work_pending(&bond->mii_work))
|
|
cancel_delayed_work_sync(&bond->mii_work);
|
|
|
|
if (bond->params.arp_interval && delayed_work_pending(&bond->arp_work))
|
|
cancel_delayed_work_sync(&bond->arp_work);
|
|
|
|
if (bond->params.mode == BOND_MODE_ALB &&
|
|
delayed_work_pending(&bond->alb_work))
|
|
cancel_delayed_work_sync(&bond->alb_work);
|
|
|
|
if (bond->params.mode == BOND_MODE_8023AD &&
|
|
delayed_work_pending(&bond->ad_work))
|
|
cancel_delayed_work_sync(&bond->ad_work);
|
|
|
|
if (delayed_work_pending(&bond->mcast_work))
|
|
cancel_delayed_work_sync(&bond->mcast_work);
|
|
}
|
|
|
|
/*
|
|
* Destroy a bonding device.
|
|
* Must be under rtnl_lock when this function is called.
|
|
*/
|
|
static void bond_uninit(struct net_device *bond_dev)
|
|
{
|
|
struct bonding *bond = netdev_priv(bond_dev);
|
|
struct vlan_entry *vlan, *tmp;
|
|
|
|
bond_netpoll_cleanup(bond_dev);
|
|
|
|
/* Release the bonded slaves */
|
|
bond_release_all(bond_dev);
|
|
|
|
list_del(&bond->bond_list);
|
|
|
|
bond_work_cancel_all(bond);
|
|
|
|
bond_remove_proc_entry(bond);
|
|
|
|
bond_debug_unregister(bond);
|
|
|
|
__hw_addr_flush(&bond->mc_list);
|
|
|
|
list_for_each_entry_safe(vlan, tmp, &bond->vlan_list, vlan_list) {
|
|
list_del(&vlan->vlan_list);
|
|
kfree(vlan);
|
|
}
|
|
}
|
|
|
|
/*------------------------- Module initialization ---------------------------*/
|
|
|
|
/*
|
|
* Convert string input module parms. Accept either the
|
|
* number of the mode or its string name. A bit complicated because
|
|
* some mode names are substrings of other names, and calls from sysfs
|
|
* may have whitespace in the name (trailing newlines, for example).
|
|
*/
|
|
int bond_parse_parm(const char *buf, const struct bond_parm_tbl *tbl)
|
|
{
|
|
int modeint = -1, i, rv;
|
|
char *p, modestr[BOND_MAX_MODENAME_LEN + 1] = { 0, };
|
|
|
|
for (p = (char *)buf; *p; p++)
|
|
if (!(isdigit(*p) || isspace(*p)))
|
|
break;
|
|
|
|
if (*p)
|
|
rv = sscanf(buf, "%20s", modestr);
|
|
else
|
|
rv = sscanf(buf, "%d", &modeint);
|
|
|
|
if (!rv)
|
|
return -1;
|
|
|
|
for (i = 0; tbl[i].modename; i++) {
|
|
if (modeint == tbl[i].mode)
|
|
return tbl[i].mode;
|
|
if (strcmp(modestr, tbl[i].modename) == 0)
|
|
return tbl[i].mode;
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
static int bond_check_params(struct bond_params *params)
|
|
{
|
|
int arp_validate_value, fail_over_mac_value, primary_reselect_value;
|
|
|
|
/*
|
|
* Convert string parameters.
|
|
*/
|
|
if (mode) {
|
|
bond_mode = bond_parse_parm(mode, bond_mode_tbl);
|
|
if (bond_mode == -1) {
|
|
pr_err("Error: Invalid bonding mode \"%s\"\n",
|
|
mode == NULL ? "NULL" : mode);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
if (xmit_hash_policy) {
|
|
if ((bond_mode != BOND_MODE_XOR) &&
|
|
(bond_mode != BOND_MODE_8023AD)) {
|
|
pr_info("xmit_hash_policy param is irrelevant in mode %s\n",
|
|
bond_mode_name(bond_mode));
|
|
} else {
|
|
xmit_hashtype = bond_parse_parm(xmit_hash_policy,
|
|
xmit_hashtype_tbl);
|
|
if (xmit_hashtype == -1) {
|
|
pr_err("Error: Invalid xmit_hash_policy \"%s\"\n",
|
|
xmit_hash_policy == NULL ? "NULL" :
|
|
xmit_hash_policy);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (lacp_rate) {
|
|
if (bond_mode != BOND_MODE_8023AD) {
|
|
pr_info("lacp_rate param is irrelevant in mode %s\n",
|
|
bond_mode_name(bond_mode));
|
|
} else {
|
|
lacp_fast = bond_parse_parm(lacp_rate, bond_lacp_tbl);
|
|
if (lacp_fast == -1) {
|
|
pr_err("Error: Invalid lacp rate \"%s\"\n",
|
|
lacp_rate == NULL ? "NULL" : lacp_rate);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (ad_select) {
|
|
params->ad_select = bond_parse_parm(ad_select, ad_select_tbl);
|
|
if (params->ad_select == -1) {
|
|
pr_err("Error: Invalid ad_select \"%s\"\n",
|
|
ad_select == NULL ? "NULL" : ad_select);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (bond_mode != BOND_MODE_8023AD) {
|
|
pr_warning("ad_select param only affects 802.3ad mode\n");
|
|
}
|
|
} else {
|
|
params->ad_select = BOND_AD_STABLE;
|
|
}
|
|
|
|
if (max_bonds < 0) {
|
|
pr_warning("Warning: max_bonds (%d) not in range %d-%d, so it was reset to BOND_DEFAULT_MAX_BONDS (%d)\n",
|
|
max_bonds, 0, INT_MAX, BOND_DEFAULT_MAX_BONDS);
|
|
max_bonds = BOND_DEFAULT_MAX_BONDS;
|
|
}
|
|
|
|
if (miimon < 0) {
|
|
pr_warning("Warning: miimon module parameter (%d), not in range 0-%d, so it was reset to %d\n",
|
|
miimon, INT_MAX, BOND_LINK_MON_INTERV);
|
|
miimon = BOND_LINK_MON_INTERV;
|
|
}
|
|
|
|
if (updelay < 0) {
|
|
pr_warning("Warning: updelay module parameter (%d), not in range 0-%d, so it was reset to 0\n",
|
|
updelay, INT_MAX);
|
|
updelay = 0;
|
|
}
|
|
|
|
if (downdelay < 0) {
|
|
pr_warning("Warning: downdelay module parameter (%d), not in range 0-%d, so it was reset to 0\n",
|
|
downdelay, INT_MAX);
|
|
downdelay = 0;
|
|
}
|
|
|
|
if ((use_carrier != 0) && (use_carrier != 1)) {
|
|
pr_warning("Warning: use_carrier module parameter (%d), not of valid value (0/1), so it was set to 1\n",
|
|
use_carrier);
|
|
use_carrier = 1;
|
|
}
|
|
|
|
if (num_peer_notif < 0 || num_peer_notif > 255) {
|
|
pr_warning("Warning: num_grat_arp/num_unsol_na (%d) not in range 0-255 so it was reset to 1\n",
|
|
num_peer_notif);
|
|
num_peer_notif = 1;
|
|
}
|
|
|
|
/* reset values for 802.3ad */
|
|
if (bond_mode == BOND_MODE_8023AD) {
|
|
if (!miimon) {
|
|
pr_warning("Warning: miimon must be specified, otherwise bonding will not detect link failure, speed and duplex which are essential for 802.3ad operation\n");
|
|
pr_warning("Forcing miimon to 100msec\n");
|
|
miimon = 100;
|
|
}
|
|
}
|
|
|
|
if (tx_queues < 1 || tx_queues > 255) {
|
|
pr_warning("Warning: tx_queues (%d) should be between "
|
|
"1 and 255, resetting to %d\n",
|
|
tx_queues, BOND_DEFAULT_TX_QUEUES);
|
|
tx_queues = BOND_DEFAULT_TX_QUEUES;
|
|
}
|
|
|
|
if ((all_slaves_active != 0) && (all_slaves_active != 1)) {
|
|
pr_warning("Warning: all_slaves_active module parameter (%d), "
|
|
"not of valid value (0/1), so it was set to "
|
|
"0\n", all_slaves_active);
|
|
all_slaves_active = 0;
|
|
}
|
|
|
|
if (resend_igmp < 0 || resend_igmp > 255) {
|
|
pr_warning("Warning: resend_igmp (%d) should be between "
|
|
"0 and 255, resetting to %d\n",
|
|
resend_igmp, BOND_DEFAULT_RESEND_IGMP);
|
|
resend_igmp = BOND_DEFAULT_RESEND_IGMP;
|
|
}
|
|
|
|
/* reset values for TLB/ALB */
|
|
if ((bond_mode == BOND_MODE_TLB) ||
|
|
(bond_mode == BOND_MODE_ALB)) {
|
|
if (!miimon) {
|
|
pr_warning("Warning: miimon must be specified, otherwise bonding will not detect link failure and link speed which are essential for TLB/ALB load balancing\n");
|
|
pr_warning("Forcing miimon to 100msec\n");
|
|
miimon = 100;
|
|
}
|
|
}
|
|
|
|
if (bond_mode == BOND_MODE_ALB) {
|
|
pr_notice("In ALB mode you might experience client disconnections upon reconnection of a link if the bonding module updelay parameter (%d msec) is incompatible with the forwarding delay time of the switch\n",
|
|
updelay);
|
|
}
|
|
|
|
if (!miimon) {
|
|
if (updelay || downdelay) {
|
|
/* just warn the user the up/down delay will have
|
|
* no effect since miimon is zero...
|
|
*/
|
|
pr_warning("Warning: miimon module parameter not set and updelay (%d) or downdelay (%d) module parameter is set; updelay and downdelay have no effect unless miimon is set\n",
|
|
updelay, downdelay);
|
|
}
|
|
} else {
|
|
/* don't allow arp monitoring */
|
|
if (arp_interval) {
|
|
pr_warning("Warning: miimon (%d) and arp_interval (%d) can't be used simultaneously, disabling ARP monitoring\n",
|
|
miimon, arp_interval);
|
|
arp_interval = 0;
|
|
}
|
|
|
|
if ((updelay % miimon) != 0) {
|
|
pr_warning("Warning: updelay (%d) is not a multiple of miimon (%d), updelay rounded to %d ms\n",
|
|
updelay, miimon,
|
|
(updelay / miimon) * miimon);
|
|
}
|
|
|
|
updelay /= miimon;
|
|
|
|
if ((downdelay % miimon) != 0) {
|
|
pr_warning("Warning: downdelay (%d) is not a multiple of miimon (%d), downdelay rounded to %d ms\n",
|
|
downdelay, miimon,
|
|
(downdelay / miimon) * miimon);
|
|
}
|
|
|
|
downdelay /= miimon;
|
|
}
|
|
|
|
if (arp_interval < 0) {
|
|
pr_warning("Warning: arp_interval module parameter (%d) , not in range 0-%d, so it was reset to %d\n",
|
|
arp_interval, INT_MAX, BOND_LINK_ARP_INTERV);
|
|
arp_interval = BOND_LINK_ARP_INTERV;
|
|
}
|
|
|
|
for (arp_ip_count = 0;
|
|
(arp_ip_count < BOND_MAX_ARP_TARGETS) && arp_ip_target[arp_ip_count];
|
|
arp_ip_count++) {
|
|
/* not complete check, but should be good enough to
|
|
catch mistakes */
|
|
if (!isdigit(arp_ip_target[arp_ip_count][0])) {
|
|
pr_warning("Warning: bad arp_ip_target module parameter (%s), ARP monitoring will not be performed\n",
|
|
arp_ip_target[arp_ip_count]);
|
|
arp_interval = 0;
|
|
} else {
|
|
__be32 ip = in_aton(arp_ip_target[arp_ip_count]);
|
|
arp_target[arp_ip_count] = ip;
|
|
}
|
|
}
|
|
|
|
if (arp_interval && !arp_ip_count) {
|
|
/* don't allow arping if no arp_ip_target given... */
|
|
pr_warning("Warning: arp_interval module parameter (%d) specified without providing an arp_ip_target parameter, arp_interval was reset to 0\n",
|
|
arp_interval);
|
|
arp_interval = 0;
|
|
}
|
|
|
|
if (arp_validate) {
|
|
if (bond_mode != BOND_MODE_ACTIVEBACKUP) {
|
|
pr_err("arp_validate only supported in active-backup mode\n");
|
|
return -EINVAL;
|
|
}
|
|
if (!arp_interval) {
|
|
pr_err("arp_validate requires arp_interval\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
arp_validate_value = bond_parse_parm(arp_validate,
|
|
arp_validate_tbl);
|
|
if (arp_validate_value == -1) {
|
|
pr_err("Error: invalid arp_validate \"%s\"\n",
|
|
arp_validate == NULL ? "NULL" : arp_validate);
|
|
return -EINVAL;
|
|
}
|
|
} else
|
|
arp_validate_value = 0;
|
|
|
|
if (miimon) {
|
|
pr_info("MII link monitoring set to %d ms\n", miimon);
|
|
} else if (arp_interval) {
|
|
int i;
|
|
|
|
pr_info("ARP monitoring set to %d ms, validate %s, with %d target(s):",
|
|
arp_interval,
|
|
arp_validate_tbl[arp_validate_value].modename,
|
|
arp_ip_count);
|
|
|
|
for (i = 0; i < arp_ip_count; i++)
|
|
pr_info(" %s", arp_ip_target[i]);
|
|
|
|
pr_info("\n");
|
|
|
|
} else if (max_bonds) {
|
|
/* miimon and arp_interval not set, we need one so things
|
|
* work as expected, see bonding.txt for details
|
|
*/
|
|
pr_debug("Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.\n");
|
|
}
|
|
|
|
if (primary && !USES_PRIMARY(bond_mode)) {
|
|
/* currently, using a primary only makes sense
|
|
* in active backup, TLB or ALB modes
|
|
*/
|
|
pr_warning("Warning: %s primary device specified but has no effect in %s mode\n",
|
|
primary, bond_mode_name(bond_mode));
|
|
primary = NULL;
|
|
}
|
|
|
|
if (primary && primary_reselect) {
|
|
primary_reselect_value = bond_parse_parm(primary_reselect,
|
|
pri_reselect_tbl);
|
|
if (primary_reselect_value == -1) {
|
|
pr_err("Error: Invalid primary_reselect \"%s\"\n",
|
|
primary_reselect ==
|
|
NULL ? "NULL" : primary_reselect);
|
|
return -EINVAL;
|
|
}
|
|
} else {
|
|
primary_reselect_value = BOND_PRI_RESELECT_ALWAYS;
|
|
}
|
|
|
|
if (fail_over_mac) {
|
|
fail_over_mac_value = bond_parse_parm(fail_over_mac,
|
|
fail_over_mac_tbl);
|
|
if (fail_over_mac_value == -1) {
|
|
pr_err("Error: invalid fail_over_mac \"%s\"\n",
|
|
arp_validate == NULL ? "NULL" : arp_validate);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (bond_mode != BOND_MODE_ACTIVEBACKUP)
|
|
pr_warning("Warning: fail_over_mac only affects active-backup mode.\n");
|
|
} else {
|
|
fail_over_mac_value = BOND_FOM_NONE;
|
|
}
|
|
|
|
/* fill params struct with the proper values */
|
|
params->mode = bond_mode;
|
|
params->xmit_policy = xmit_hashtype;
|
|
params->miimon = miimon;
|
|
params->num_peer_notif = num_peer_notif;
|
|
params->arp_interval = arp_interval;
|
|
params->arp_validate = arp_validate_value;
|
|
params->updelay = updelay;
|
|
params->downdelay = downdelay;
|
|
params->use_carrier = use_carrier;
|
|
params->lacp_fast = lacp_fast;
|
|
params->primary[0] = 0;
|
|
params->primary_reselect = primary_reselect_value;
|
|
params->fail_over_mac = fail_over_mac_value;
|
|
params->tx_queues = tx_queues;
|
|
params->all_slaves_active = all_slaves_active;
|
|
params->resend_igmp = resend_igmp;
|
|
params->min_links = min_links;
|
|
|
|
if (primary) {
|
|
strncpy(params->primary, primary, IFNAMSIZ);
|
|
params->primary[IFNAMSIZ - 1] = 0;
|
|
}
|
|
|
|
memcpy(params->arp_targets, arp_target, sizeof(arp_target));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct lock_class_key bonding_netdev_xmit_lock_key;
|
|
static struct lock_class_key bonding_netdev_addr_lock_key;
|
|
|
|
static void bond_set_lockdep_class_one(struct net_device *dev,
|
|
struct netdev_queue *txq,
|
|
void *_unused)
|
|
{
|
|
lockdep_set_class(&txq->_xmit_lock,
|
|
&bonding_netdev_xmit_lock_key);
|
|
}
|
|
|
|
static void bond_set_lockdep_class(struct net_device *dev)
|
|
{
|
|
lockdep_set_class(&dev->addr_list_lock,
|
|
&bonding_netdev_addr_lock_key);
|
|
netdev_for_each_tx_queue(dev, bond_set_lockdep_class_one, NULL);
|
|
}
|
|
|
|
/*
|
|
* Called from registration process
|
|
*/
|
|
static int bond_init(struct net_device *bond_dev)
|
|
{
|
|
struct bonding *bond = netdev_priv(bond_dev);
|
|
struct bond_net *bn = net_generic(dev_net(bond_dev), bond_net_id);
|
|
struct alb_bond_info *bond_info = &(BOND_ALB_INFO(bond));
|
|
|
|
pr_debug("Begin bond_init for %s\n", bond_dev->name);
|
|
|
|
/*
|
|
* Initialize locks that may be required during
|
|
* en/deslave operations. All of the bond_open work
|
|
* (of which this is part) should really be moved to
|
|
* a phase prior to dev_open
|
|
*/
|
|
spin_lock_init(&(bond_info->tx_hashtbl_lock));
|
|
spin_lock_init(&(bond_info->rx_hashtbl_lock));
|
|
|
|
bond->wq = create_singlethread_workqueue(bond_dev->name);
|
|
if (!bond->wq)
|
|
return -ENOMEM;
|
|
|
|
bond_set_lockdep_class(bond_dev);
|
|
|
|
bond_create_proc_entry(bond);
|
|
list_add_tail(&bond->bond_list, &bn->dev_list);
|
|
|
|
bond_prepare_sysfs_group(bond);
|
|
|
|
bond_debug_register(bond);
|
|
|
|
__hw_addr_init(&bond->mc_list);
|
|
return 0;
|
|
}
|
|
|
|
static int bond_validate(struct nlattr *tb[], struct nlattr *data[])
|
|
{
|
|
if (tb[IFLA_ADDRESS]) {
|
|
if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN)
|
|
return -EINVAL;
|
|
if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS])))
|
|
return -EADDRNOTAVAIL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int bond_get_tx_queues(struct net *net, struct nlattr *tb[],
|
|
unsigned int *num_queues,
|
|
unsigned int *real_num_queues)
|
|
{
|
|
*num_queues = tx_queues;
|
|
return 0;
|
|
}
|
|
|
|
static struct rtnl_link_ops bond_link_ops __read_mostly = {
|
|
.kind = "bond",
|
|
.priv_size = sizeof(struct bonding),
|
|
.setup = bond_setup,
|
|
.validate = bond_validate,
|
|
.get_tx_queues = bond_get_tx_queues,
|
|
};
|
|
|
|
/* Create a new bond based on the specified name and bonding parameters.
|
|
* If name is NULL, obtain a suitable "bond%d" name for us.
|
|
* Caller must NOT hold rtnl_lock; we need to release it here before we
|
|
* set up our sysfs entries.
|
|
*/
|
|
int bond_create(struct net *net, const char *name)
|
|
{
|
|
struct net_device *bond_dev;
|
|
int res;
|
|
|
|
rtnl_lock();
|
|
|
|
bond_dev = alloc_netdev_mq(sizeof(struct bonding),
|
|
name ? name : "bond%d",
|
|
bond_setup, tx_queues);
|
|
if (!bond_dev) {
|
|
pr_err("%s: eek! can't alloc netdev!\n", name);
|
|
rtnl_unlock();
|
|
return -ENOMEM;
|
|
}
|
|
|
|
dev_net_set(bond_dev, net);
|
|
bond_dev->rtnl_link_ops = &bond_link_ops;
|
|
|
|
res = register_netdevice(bond_dev);
|
|
|
|
netif_carrier_off(bond_dev);
|
|
|
|
rtnl_unlock();
|
|
if (res < 0)
|
|
bond_destructor(bond_dev);
|
|
return res;
|
|
}
|
|
|
|
static int __net_init bond_net_init(struct net *net)
|
|
{
|
|
struct bond_net *bn = net_generic(net, bond_net_id);
|
|
|
|
bn->net = net;
|
|
INIT_LIST_HEAD(&bn->dev_list);
|
|
|
|
bond_create_proc_dir(bn);
|
|
bond_create_sysfs(bn);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __net_exit bond_net_exit(struct net *net)
|
|
{
|
|
struct bond_net *bn = net_generic(net, bond_net_id);
|
|
|
|
bond_destroy_sysfs(bn);
|
|
bond_destroy_proc_dir(bn);
|
|
}
|
|
|
|
static struct pernet_operations bond_net_ops = {
|
|
.init = bond_net_init,
|
|
.exit = bond_net_exit,
|
|
.id = &bond_net_id,
|
|
.size = sizeof(struct bond_net),
|
|
};
|
|
|
|
static int __init bonding_init(void)
|
|
{
|
|
int i;
|
|
int res;
|
|
|
|
pr_info("%s", bond_version);
|
|
|
|
res = bond_check_params(&bonding_defaults);
|
|
if (res)
|
|
goto out;
|
|
|
|
res = register_pernet_subsys(&bond_net_ops);
|
|
if (res)
|
|
goto out;
|
|
|
|
res = rtnl_link_register(&bond_link_ops);
|
|
if (res)
|
|
goto err_link;
|
|
|
|
bond_create_debugfs();
|
|
|
|
for (i = 0; i < max_bonds; i++) {
|
|
res = bond_create(&init_net, NULL);
|
|
if (res)
|
|
goto err;
|
|
}
|
|
|
|
register_netdevice_notifier(&bond_netdev_notifier);
|
|
register_inetaddr_notifier(&bond_inetaddr_notifier);
|
|
out:
|
|
return res;
|
|
err:
|
|
rtnl_link_unregister(&bond_link_ops);
|
|
err_link:
|
|
unregister_pernet_subsys(&bond_net_ops);
|
|
goto out;
|
|
|
|
}
|
|
|
|
static void __exit bonding_exit(void)
|
|
{
|
|
unregister_netdevice_notifier(&bond_netdev_notifier);
|
|
unregister_inetaddr_notifier(&bond_inetaddr_notifier);
|
|
|
|
bond_destroy_debugfs();
|
|
|
|
rtnl_link_unregister(&bond_link_ops);
|
|
unregister_pernet_subsys(&bond_net_ops);
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
/*
|
|
* Make sure we don't have an imbalance on our netpoll blocking
|
|
*/
|
|
WARN_ON(atomic_read(&netpoll_block_tx));
|
|
#endif
|
|
}
|
|
|
|
module_init(bonding_init);
|
|
module_exit(bonding_exit);
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION(DRV_VERSION);
|
|
MODULE_DESCRIPTION(DRV_DESCRIPTION ", v" DRV_VERSION);
|
|
MODULE_AUTHOR("Thomas Davis, tadavis@lbl.gov and many others");
|
|
MODULE_ALIAS_RTNL_LINK("bond");
|