a613163dff
This converts the Integrator platform to use common clock and the ICST driver. Since from this point not all ARM reference platforms use the clock, we define CONFIG_PLAT_VERSATILE_CLOCK and select it for all platforms except the Integrator. Open issue: I could not use the .init_early() field of the machine descriptor to initialize the clocks, but had to move them to .init_irq(), so presumably .init_early() is so early that common clock is not up, and .init_machine() is too late since it's needed for the clockevent/clocksource initialization. Any suggestions on how to solve this is very welcome. Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [mturquette@linaro.org: use 'select' instead of versatile Kconfig] Signed-off-by: Mike Turquette <mturquette@linaro.org>
111 lines
2.7 KiB
C
111 lines
2.7 KiB
C
#include <linux/clk.h>
|
|
#include <linux/clkdev.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/clk-provider.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <mach/platform.h>
|
|
|
|
#include "clk-icst.h"
|
|
|
|
/*
|
|
* Implementation of the ARM Integrator/AP and Integrator/CP clock tree.
|
|
* Inspired by portions of:
|
|
* plat-versatile/clock.c and plat-versatile/include/plat/clock.h
|
|
*/
|
|
#define CM_LOCK (__io_address(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET)
|
|
#define CM_AUXOSC (__io_address(INTEGRATOR_HDR_BASE)+0x1c)
|
|
|
|
/**
|
|
* cp_auxvco_get() - get ICST VCO settings for the Integrator/CP
|
|
* @vco: ICST VCO parameters to update with hardware status
|
|
*/
|
|
static struct icst_vco cp_auxvco_get(void)
|
|
{
|
|
u32 val;
|
|
struct icst_vco vco;
|
|
|
|
val = readl(CM_AUXOSC);
|
|
vco.v = val & 0x1ff;
|
|
vco.r = (val >> 9) & 0x7f;
|
|
vco.s = (val >> 16) & 03;
|
|
return vco;
|
|
}
|
|
|
|
/**
|
|
* cp_auxvco_set() - commit changes to Integrator/CP ICST VCO
|
|
* @vco: ICST VCO parameters to commit
|
|
*/
|
|
static void cp_auxvco_set(struct icst_vco vco)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl(CM_AUXOSC) & ~0x7ffff;
|
|
val |= vco.v | (vco.r << 9) | (vco.s << 16);
|
|
|
|
/* This magic unlocks the CM VCO so it can be controlled */
|
|
writel(0xa05f, CM_LOCK);
|
|
writel(val, CM_AUXOSC);
|
|
/* This locks the CM again */
|
|
writel(0, CM_LOCK);
|
|
}
|
|
|
|
static const struct icst_params cp_auxvco_params = {
|
|
.ref = 24000000,
|
|
.vco_max = ICST525_VCO_MAX_5V,
|
|
.vco_min = ICST525_VCO_MIN,
|
|
.vd_min = 8,
|
|
.vd_max = 263,
|
|
.rd_min = 3,
|
|
.rd_max = 65,
|
|
.s2div = icst525_s2div,
|
|
.idx2s = icst525_idx2s,
|
|
};
|
|
|
|
static const struct clk_icst_desc __initdata cp_icst_desc = {
|
|
.params = &cp_auxvco_params,
|
|
.getvco = cp_auxvco_get,
|
|
.setvco = cp_auxvco_set,
|
|
};
|
|
|
|
/*
|
|
* integrator_clk_init() - set up the integrator clock tree
|
|
* @is_cp: pass true if it's the Integrator/CP else AP is assumed
|
|
*/
|
|
void __init integrator_clk_init(bool is_cp)
|
|
{
|
|
struct clk *clk;
|
|
|
|
/* APB clock dummy */
|
|
clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
|
|
clk_register_clkdev(clk, "apb_pclk", NULL);
|
|
|
|
/* UART reference clock */
|
|
clk = clk_register_fixed_rate(NULL, "uartclk", NULL, CLK_IS_ROOT,
|
|
14745600);
|
|
clk_register_clkdev(clk, NULL, "uart0");
|
|
clk_register_clkdev(clk, NULL, "uart1");
|
|
if (is_cp)
|
|
clk_register_clkdev(clk, NULL, "mmci");
|
|
|
|
/* 24 MHz clock */
|
|
clk = clk_register_fixed_rate(NULL, "clk24mhz", NULL, CLK_IS_ROOT,
|
|
24000000);
|
|
clk_register_clkdev(clk, NULL, "kmi0");
|
|
clk_register_clkdev(clk, NULL, "kmi1");
|
|
if (!is_cp)
|
|
clk_register_clkdev(clk, NULL, "ap_timer");
|
|
|
|
if (!is_cp)
|
|
return;
|
|
|
|
/* 1 MHz clock */
|
|
clk = clk_register_fixed_rate(NULL, "clk1mhz", NULL, CLK_IS_ROOT,
|
|
1000000);
|
|
clk_register_clkdev(clk, NULL, "sp804");
|
|
|
|
/* ICST VCO clock used on the Integrator/CP CLCD */
|
|
clk = icst_clk_register(NULL, &cp_icst_desc);
|
|
clk_register_clkdev(clk, NULL, "clcd");
|
|
}
|