568ca92774
Log device name instead of driver name in *_pc_intr() and *_transfer_pc*(). While at it: * Merge two consecutive printk()-s in *_pc_intr() together. * Replace "floppy"/"tape"/"scsi" references in printk()-s by "device". Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
1659 lines
44 KiB
C
1659 lines
44 KiB
C
/*
|
|
* IDE ATAPI floppy driver.
|
|
*
|
|
* Copyright (C) 1996-1999 Gadi Oxman <gadio@netvision.net.il>
|
|
* Copyright (C) 2000-2002 Paul Bristow <paul@paulbristow.net>
|
|
* Copyright (C) 2005 Bartlomiej Zolnierkiewicz
|
|
*
|
|
* This driver supports the following IDE floppy drives:
|
|
*
|
|
* LS-120/240 SuperDisk
|
|
* Iomega Zip 100/250
|
|
* Iomega PC Card Clik!/PocketZip
|
|
*
|
|
* For a historical changelog see
|
|
* Documentation/ide/ChangeLog.ide-floppy.1996-2002
|
|
*/
|
|
|
|
#define IDEFLOPPY_VERSION "1.00"
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/string.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/major.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/genhd.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/cdrom.h>
|
|
#include <linux/ide.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/mutex.h>
|
|
|
|
#include <scsi/scsi_ioctl.h>
|
|
|
|
#include <asm/byteorder.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/io.h>
|
|
#include <asm/unaligned.h>
|
|
|
|
/* define to see debug info */
|
|
#define IDEFLOPPY_DEBUG_LOG 0
|
|
|
|
/* #define IDEFLOPPY_DEBUG(fmt, args...) printk(KERN_INFO fmt, ## args) */
|
|
#define IDEFLOPPY_DEBUG(fmt, args...)
|
|
|
|
#if IDEFLOPPY_DEBUG_LOG
|
|
#define debug_log(fmt, args...) \
|
|
printk(KERN_INFO "ide-floppy: " fmt, ## args)
|
|
#else
|
|
#define debug_log(fmt, args...) do {} while (0)
|
|
#endif
|
|
|
|
|
|
/* Some drives require a longer irq timeout. */
|
|
#define IDEFLOPPY_WAIT_CMD (5 * WAIT_CMD)
|
|
|
|
/*
|
|
* After each failed packet command we issue a request sense command and retry
|
|
* the packet command IDEFLOPPY_MAX_PC_RETRIES times.
|
|
*/
|
|
#define IDEFLOPPY_MAX_PC_RETRIES 3
|
|
|
|
/*
|
|
* With each packet command, we allocate a buffer of IDEFLOPPY_PC_BUFFER_SIZE
|
|
* bytes.
|
|
*/
|
|
#define IDEFLOPPY_PC_BUFFER_SIZE 256
|
|
|
|
/*
|
|
* In various places in the driver, we need to allocate storage for packet
|
|
* commands and requests, which will remain valid while we leave the driver to
|
|
* wait for an interrupt or a timeout event.
|
|
*/
|
|
#define IDEFLOPPY_PC_STACK (10 + IDEFLOPPY_MAX_PC_RETRIES)
|
|
|
|
/* format capacities descriptor codes */
|
|
#define CAPACITY_INVALID 0x00
|
|
#define CAPACITY_UNFORMATTED 0x01
|
|
#define CAPACITY_CURRENT 0x02
|
|
#define CAPACITY_NO_CARTRIDGE 0x03
|
|
|
|
/*
|
|
* Most of our global data which we need to save even as we leave the driver
|
|
* due to an interrupt or a timer event is stored in a variable of type
|
|
* idefloppy_floppy_t, defined below.
|
|
*/
|
|
typedef struct ide_floppy_obj {
|
|
ide_drive_t *drive;
|
|
ide_driver_t *driver;
|
|
struct gendisk *disk;
|
|
struct kref kref;
|
|
unsigned int openers; /* protected by BKL for now */
|
|
|
|
/* Current packet command */
|
|
struct ide_atapi_pc *pc;
|
|
/* Last failed packet command */
|
|
struct ide_atapi_pc *failed_pc;
|
|
/* Packet command stack */
|
|
struct ide_atapi_pc pc_stack[IDEFLOPPY_PC_STACK];
|
|
/* Next free packet command storage space */
|
|
int pc_stack_index;
|
|
struct request rq_stack[IDEFLOPPY_PC_STACK];
|
|
/* We implement a circular array */
|
|
int rq_stack_index;
|
|
|
|
/* Last error information */
|
|
u8 sense_key, asc, ascq;
|
|
/* delay this long before sending packet command */
|
|
u8 ticks;
|
|
int progress_indication;
|
|
|
|
/* Device information */
|
|
/* Current format */
|
|
int blocks, block_size, bs_factor;
|
|
/* Last format capacity descriptor */
|
|
u8 cap_desc[8];
|
|
/* Copy of the flexible disk page */
|
|
u8 flexible_disk_page[32];
|
|
/* Write protect */
|
|
int wp;
|
|
/* Supports format progress report */
|
|
int srfp;
|
|
/* Status/Action flags */
|
|
unsigned long flags;
|
|
} idefloppy_floppy_t;
|
|
|
|
#define IDEFLOPPY_TICKS_DELAY HZ/20 /* default delay for ZIP 100 (50ms) */
|
|
|
|
/* Floppy flag bits values. */
|
|
enum {
|
|
/* DRQ interrupt device */
|
|
IDEFLOPPY_FLAG_DRQ_INTERRUPT = (1 << 0),
|
|
/* Media may have changed */
|
|
IDEFLOPPY_FLAG_MEDIA_CHANGED = (1 << 1),
|
|
/* Format in progress */
|
|
IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS = (1 << 2),
|
|
/* Avoid commands not supported in Clik drive */
|
|
IDEFLOPPY_FLAG_CLIK_DRIVE = (1 << 3),
|
|
/* Requires BH algorithm for packets */
|
|
IDEFLOPPY_FLAG_ZIP_DRIVE = (1 << 4),
|
|
};
|
|
|
|
/* Defines for the MODE SENSE command */
|
|
#define MODE_SENSE_CURRENT 0x00
|
|
#define MODE_SENSE_CHANGEABLE 0x01
|
|
#define MODE_SENSE_DEFAULT 0x02
|
|
#define MODE_SENSE_SAVED 0x03
|
|
|
|
/* IOCTLs used in low-level formatting. */
|
|
#define IDEFLOPPY_IOCTL_FORMAT_SUPPORTED 0x4600
|
|
#define IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY 0x4601
|
|
#define IDEFLOPPY_IOCTL_FORMAT_START 0x4602
|
|
#define IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS 0x4603
|
|
|
|
/* Error code returned in rq->errors to the higher part of the driver. */
|
|
#define IDEFLOPPY_ERROR_GENERAL 101
|
|
|
|
/*
|
|
* Pages of the SELECT SENSE / MODE SENSE packet commands.
|
|
* See SFF-8070i spec.
|
|
*/
|
|
#define IDEFLOPPY_CAPABILITIES_PAGE 0x1b
|
|
#define IDEFLOPPY_FLEXIBLE_DISK_PAGE 0x05
|
|
|
|
static DEFINE_MUTEX(idefloppy_ref_mutex);
|
|
|
|
#define to_ide_floppy(obj) container_of(obj, struct ide_floppy_obj, kref)
|
|
|
|
#define ide_floppy_g(disk) \
|
|
container_of((disk)->private_data, struct ide_floppy_obj, driver)
|
|
|
|
static struct ide_floppy_obj *ide_floppy_get(struct gendisk *disk)
|
|
{
|
|
struct ide_floppy_obj *floppy = NULL;
|
|
|
|
mutex_lock(&idefloppy_ref_mutex);
|
|
floppy = ide_floppy_g(disk);
|
|
if (floppy)
|
|
kref_get(&floppy->kref);
|
|
mutex_unlock(&idefloppy_ref_mutex);
|
|
return floppy;
|
|
}
|
|
|
|
static void idefloppy_cleanup_obj(struct kref *);
|
|
|
|
static void ide_floppy_put(struct ide_floppy_obj *floppy)
|
|
{
|
|
mutex_lock(&idefloppy_ref_mutex);
|
|
kref_put(&floppy->kref, idefloppy_cleanup_obj);
|
|
mutex_unlock(&idefloppy_ref_mutex);
|
|
}
|
|
|
|
/*
|
|
* Used to finish servicing a request. For read/write requests, we will call
|
|
* ide_end_request to pass to the next buffer.
|
|
*/
|
|
static int idefloppy_end_request(ide_drive_t *drive, int uptodate, int nsecs)
|
|
{
|
|
idefloppy_floppy_t *floppy = drive->driver_data;
|
|
struct request *rq = HWGROUP(drive)->rq;
|
|
int error;
|
|
|
|
debug_log("Reached %s\n", __func__);
|
|
|
|
switch (uptodate) {
|
|
case 0: error = IDEFLOPPY_ERROR_GENERAL; break;
|
|
case 1: error = 0; break;
|
|
default: error = uptodate;
|
|
}
|
|
if (error)
|
|
floppy->failed_pc = NULL;
|
|
/* Why does this happen? */
|
|
if (!rq)
|
|
return 0;
|
|
if (!blk_special_request(rq)) {
|
|
/* our real local end request function */
|
|
ide_end_request(drive, uptodate, nsecs);
|
|
return 0;
|
|
}
|
|
rq->errors = error;
|
|
/* fixme: need to move this local also */
|
|
ide_end_drive_cmd(drive, 0, 0);
|
|
return 0;
|
|
}
|
|
|
|
static void ide_floppy_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
|
|
unsigned int bcount, int direction)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
struct request *rq = pc->rq;
|
|
struct req_iterator iter;
|
|
struct bio_vec *bvec;
|
|
unsigned long flags;
|
|
int count, done = 0;
|
|
char *data;
|
|
|
|
rq_for_each_segment(bvec, rq, iter) {
|
|
if (!bcount)
|
|
break;
|
|
|
|
count = min(bvec->bv_len, bcount);
|
|
|
|
data = bvec_kmap_irq(bvec, &flags);
|
|
if (direction)
|
|
hwif->output_data(drive, NULL, data, count);
|
|
else
|
|
hwif->input_data(drive, NULL, data, count);
|
|
bvec_kunmap_irq(data, &flags);
|
|
|
|
bcount -= count;
|
|
pc->b_count += count;
|
|
done += count;
|
|
}
|
|
|
|
idefloppy_end_request(drive, 1, done >> 9);
|
|
|
|
if (bcount) {
|
|
printk(KERN_ERR "%s: leftover data in %s, bcount == %d\n",
|
|
drive->name, __func__, bcount);
|
|
ide_pad_transfer(drive, direction, bcount);
|
|
}
|
|
}
|
|
|
|
static void idefloppy_update_buffers(ide_drive_t *drive,
|
|
struct ide_atapi_pc *pc)
|
|
{
|
|
struct request *rq = pc->rq;
|
|
struct bio *bio = rq->bio;
|
|
|
|
while ((bio = rq->bio) != NULL)
|
|
idefloppy_end_request(drive, 1, 0);
|
|
}
|
|
|
|
/*
|
|
* Generate a new packet command request in front of the request queue, before
|
|
* the current request so that it will be processed immediately, on the next
|
|
* pass through the driver.
|
|
*/
|
|
static void idefloppy_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc,
|
|
struct request *rq)
|
|
{
|
|
struct ide_floppy_obj *floppy = drive->driver_data;
|
|
|
|
blk_rq_init(NULL, rq);
|
|
rq->buffer = (char *) pc;
|
|
rq->cmd_type = REQ_TYPE_SPECIAL;
|
|
rq->cmd_flags |= REQ_PREEMPT;
|
|
rq->rq_disk = floppy->disk;
|
|
ide_do_drive_cmd(drive, rq);
|
|
}
|
|
|
|
static struct ide_atapi_pc *idefloppy_next_pc_storage(ide_drive_t *drive)
|
|
{
|
|
idefloppy_floppy_t *floppy = drive->driver_data;
|
|
|
|
if (floppy->pc_stack_index == IDEFLOPPY_PC_STACK)
|
|
floppy->pc_stack_index = 0;
|
|
return (&floppy->pc_stack[floppy->pc_stack_index++]);
|
|
}
|
|
|
|
static struct request *idefloppy_next_rq_storage(ide_drive_t *drive)
|
|
{
|
|
idefloppy_floppy_t *floppy = drive->driver_data;
|
|
|
|
if (floppy->rq_stack_index == IDEFLOPPY_PC_STACK)
|
|
floppy->rq_stack_index = 0;
|
|
return (&floppy->rq_stack[floppy->rq_stack_index++]);
|
|
}
|
|
|
|
static void idefloppy_request_sense_callback(ide_drive_t *drive)
|
|
{
|
|
idefloppy_floppy_t *floppy = drive->driver_data;
|
|
u8 *buf = floppy->pc->buf;
|
|
|
|
debug_log("Reached %s\n", __func__);
|
|
|
|
if (!floppy->pc->error) {
|
|
floppy->sense_key = buf[2] & 0x0F;
|
|
floppy->asc = buf[12];
|
|
floppy->ascq = buf[13];
|
|
floppy->progress_indication = buf[15] & 0x80 ?
|
|
(u16)get_unaligned((u16 *)&buf[16]) : 0x10000;
|
|
|
|
if (floppy->failed_pc)
|
|
debug_log("pc = %x, sense key = %x, asc = %x,"
|
|
" ascq = %x\n",
|
|
floppy->failed_pc->c[0],
|
|
floppy->sense_key,
|
|
floppy->asc,
|
|
floppy->ascq);
|
|
else
|
|
debug_log("sense key = %x, asc = %x, ascq = %x\n",
|
|
floppy->sense_key,
|
|
floppy->asc,
|
|
floppy->ascq);
|
|
|
|
|
|
idefloppy_end_request(drive, 1, 0);
|
|
} else {
|
|
printk(KERN_ERR "Error in REQUEST SENSE itself - Aborting"
|
|
" request!\n");
|
|
idefloppy_end_request(drive, 0, 0);
|
|
}
|
|
}
|
|
|
|
/* General packet command callback function. */
|
|
static void idefloppy_pc_callback(ide_drive_t *drive)
|
|
{
|
|
idefloppy_floppy_t *floppy = drive->driver_data;
|
|
|
|
debug_log("Reached %s\n", __func__);
|
|
|
|
idefloppy_end_request(drive, floppy->pc->error ? 0 : 1, 0);
|
|
}
|
|
|
|
static void idefloppy_init_pc(struct ide_atapi_pc *pc)
|
|
{
|
|
memset(pc->c, 0, 12);
|
|
pc->retries = 0;
|
|
pc->flags = 0;
|
|
pc->req_xfer = 0;
|
|
pc->buf = pc->pc_buf;
|
|
pc->buf_size = IDEFLOPPY_PC_BUFFER_SIZE;
|
|
pc->idefloppy_callback = &idefloppy_pc_callback;
|
|
}
|
|
|
|
static void idefloppy_create_request_sense_cmd(struct ide_atapi_pc *pc)
|
|
{
|
|
idefloppy_init_pc(pc);
|
|
pc->c[0] = GPCMD_REQUEST_SENSE;
|
|
pc->c[4] = 255;
|
|
pc->req_xfer = 18;
|
|
pc->idefloppy_callback = &idefloppy_request_sense_callback;
|
|
}
|
|
|
|
/*
|
|
* Called when an error was detected during the last packet command. We queue a
|
|
* request sense packet command in the head of the request list.
|
|
*/
|
|
static void idefloppy_retry_pc(ide_drive_t *drive)
|
|
{
|
|
struct ide_atapi_pc *pc;
|
|
struct request *rq;
|
|
|
|
(void)ide_read_error(drive);
|
|
pc = idefloppy_next_pc_storage(drive);
|
|
rq = idefloppy_next_rq_storage(drive);
|
|
idefloppy_create_request_sense_cmd(pc);
|
|
idefloppy_queue_pc_head(drive, pc, rq);
|
|
}
|
|
|
|
/* The usual interrupt handler called during a packet command. */
|
|
static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive)
|
|
{
|
|
idefloppy_floppy_t *floppy = drive->driver_data;
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
struct ide_atapi_pc *pc = floppy->pc;
|
|
struct request *rq = pc->rq;
|
|
xfer_func_t *xferfunc;
|
|
unsigned int temp;
|
|
int dma_error = 0;
|
|
u16 bcount;
|
|
u8 stat, ireason;
|
|
|
|
debug_log("Reached %s interrupt handler\n", __func__);
|
|
|
|
if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
|
|
dma_error = hwif->dma_ops->dma_end(drive);
|
|
if (dma_error) {
|
|
printk(KERN_ERR "%s: DMA %s error\n", drive->name,
|
|
rq_data_dir(rq) ? "write" : "read");
|
|
pc->flags |= PC_FLAG_DMA_ERROR;
|
|
} else {
|
|
pc->xferred = pc->req_xfer;
|
|
idefloppy_update_buffers(drive, pc);
|
|
}
|
|
debug_log("DMA finished\n");
|
|
}
|
|
|
|
/* Clear the interrupt */
|
|
stat = ide_read_status(drive);
|
|
|
|
/* No more interrupts */
|
|
if ((stat & DRQ_STAT) == 0) {
|
|
debug_log("Packet command completed, %d bytes transferred\n",
|
|
pc->xferred);
|
|
pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
|
|
|
|
local_irq_enable_in_hardirq();
|
|
|
|
if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) {
|
|
/* Error detected */
|
|
debug_log("%s: I/O error\n", drive->name);
|
|
rq->errors++;
|
|
if (pc->c[0] == GPCMD_REQUEST_SENSE) {
|
|
printk(KERN_ERR "%s: I/O error in request sense"
|
|
" command\n", drive->name);
|
|
return ide_do_reset(drive);
|
|
}
|
|
/* Retry operation */
|
|
idefloppy_retry_pc(drive);
|
|
/* queued, but not started */
|
|
return ide_stopped;
|
|
}
|
|
pc->error = 0;
|
|
if (floppy->failed_pc == pc)
|
|
floppy->failed_pc = NULL;
|
|
/* Command finished - Call the callback function */
|
|
pc->idefloppy_callback(drive);
|
|
return ide_stopped;
|
|
}
|
|
|
|
if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
|
|
pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
|
|
printk(KERN_ERR "%s: The device wants to issue more interrupts "
|
|
"in DMA mode\n", drive->name);
|
|
ide_dma_off(drive);
|
|
return ide_do_reset(drive);
|
|
}
|
|
|
|
/* Get the number of bytes to transfer */
|
|
bcount = (hwif->INB(hwif->io_ports.lbah_addr) << 8) |
|
|
hwif->INB(hwif->io_ports.lbam_addr);
|
|
/* on this interrupt */
|
|
ireason = hwif->INB(hwif->io_ports.nsect_addr);
|
|
|
|
if (ireason & CD) {
|
|
printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__);
|
|
return ide_do_reset(drive);
|
|
}
|
|
if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) {
|
|
/* Hopefully, we will never get here */
|
|
printk(KERN_ERR "%s: We wanted to %s, but the device wants us "
|
|
"to %s!\n", drive->name,
|
|
(ireason & IO) ? "Write" : "Read",
|
|
(ireason & IO) ? "Read" : "Write");
|
|
return ide_do_reset(drive);
|
|
}
|
|
if (!(pc->flags & PC_FLAG_WRITING)) {
|
|
/* Reading - Check that we have enough space */
|
|
temp = pc->xferred + bcount;
|
|
if (temp > pc->req_xfer) {
|
|
if (temp > pc->buf_size) {
|
|
printk(KERN_ERR "%s: The device wants to send "
|
|
"us more data than expected - "
|
|
"discarding data\n",
|
|
drive->name);
|
|
ide_pad_transfer(drive, 0, bcount);
|
|
|
|
ide_set_handler(drive,
|
|
&idefloppy_pc_intr,
|
|
IDEFLOPPY_WAIT_CMD,
|
|
NULL);
|
|
return ide_started;
|
|
}
|
|
debug_log("The device wants to send us more data than "
|
|
"expected - allowing transfer\n");
|
|
}
|
|
}
|
|
if (pc->flags & PC_FLAG_WRITING)
|
|
xferfunc = hwif->output_data;
|
|
else
|
|
xferfunc = hwif->input_data;
|
|
|
|
if (pc->buf)
|
|
xferfunc(drive, NULL, pc->cur_pos, bcount);
|
|
else
|
|
ide_floppy_io_buffers(drive, pc, bcount,
|
|
!!(pc->flags & PC_FLAG_WRITING));
|
|
|
|
/* Update the current position */
|
|
pc->xferred += bcount;
|
|
pc->cur_pos += bcount;
|
|
|
|
/* And set the interrupt handler again */
|
|
ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL);
|
|
return ide_started;
|
|
}
|
|
|
|
/*
|
|
* What we have here is a classic case of a top half / bottom half interrupt
|
|
* service routine. In interrupt mode, the device sends an interrupt to signal
|
|
* that it is ready to receive a packet. However, we need to delay about 2-3
|
|
* ticks before issuing the packet or we gets in trouble.
|
|
*
|
|
* So, follow carefully. transfer_pc1 is called as an interrupt (or directly).
|
|
* In either case, when the device says it's ready for a packet, we schedule
|
|
* the packet transfer to occur about 2-3 ticks later in transfer_pc2.
|
|
*/
|
|
static int idefloppy_transfer_pc2(ide_drive_t *drive)
|
|
{
|
|
idefloppy_floppy_t *floppy = drive->driver_data;
|
|
|
|
/* Send the actual packet */
|
|
drive->hwif->output_data(drive, NULL, floppy->pc->c, 12);
|
|
|
|
/* Timeout for the packet command */
|
|
return IDEFLOPPY_WAIT_CMD;
|
|
}
|
|
|
|
static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
idefloppy_floppy_t *floppy = drive->driver_data;
|
|
ide_expiry_t *expiry;
|
|
unsigned int timeout;
|
|
ide_startstop_t startstop;
|
|
u8 ireason;
|
|
|
|
if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) {
|
|
printk(KERN_ERR "%s: Strange, packet command initiated yet "
|
|
"DRQ isn't asserted\n", drive->name);
|
|
return startstop;
|
|
}
|
|
ireason = hwif->INB(hwif->io_ports.nsect_addr);
|
|
if ((ireason & CD) == 0 || (ireason & IO)) {
|
|
printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing "
|
|
"a packet command\n", drive->name);
|
|
return ide_do_reset(drive);
|
|
}
|
|
/*
|
|
* The following delay solves a problem with ATAPI Zip 100 drives
|
|
* where the Busy flag was apparently being deasserted before the
|
|
* unit was ready to receive data. This was happening on a
|
|
* 1200 MHz Athlon system. 10/26/01 25msec is too short,
|
|
* 40 and 50msec work well. idefloppy_pc_intr will not be actually
|
|
* used until after the packet is moved in about 50 msec.
|
|
*/
|
|
if (floppy->flags & IDEFLOPPY_FLAG_ZIP_DRIVE) {
|
|
timeout = floppy->ticks;
|
|
expiry = &idefloppy_transfer_pc2;
|
|
} else {
|
|
timeout = IDEFLOPPY_WAIT_CMD;
|
|
expiry = NULL;
|
|
}
|
|
|
|
ide_set_handler(drive, &idefloppy_pc_intr, timeout, expiry);
|
|
|
|
if ((floppy->flags & IDEFLOPPY_FLAG_ZIP_DRIVE) == 0)
|
|
/* Send the actual packet */
|
|
hwif->output_data(drive, NULL, floppy->pc->c, 12);
|
|
|
|
return ide_started;
|
|
}
|
|
|
|
static void ide_floppy_report_error(idefloppy_floppy_t *floppy,
|
|
struct ide_atapi_pc *pc)
|
|
{
|
|
/* supress error messages resulting from Medium not present */
|
|
if (floppy->sense_key == 0x02 &&
|
|
floppy->asc == 0x3a &&
|
|
floppy->ascq == 0x00)
|
|
return;
|
|
|
|
printk(KERN_ERR "ide-floppy: %s: I/O error, pc = %2x, key = %2x, "
|
|
"asc = %2x, ascq = %2x\n",
|
|
floppy->drive->name, pc->c[0], floppy->sense_key,
|
|
floppy->asc, floppy->ascq);
|
|
|
|
}
|
|
|
|
static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
|
|
struct ide_atapi_pc *pc)
|
|
{
|
|
idefloppy_floppy_t *floppy = drive->driver_data;
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
u16 bcount;
|
|
u8 dma;
|
|
|
|
if (floppy->failed_pc == NULL &&
|
|
pc->c[0] != GPCMD_REQUEST_SENSE)
|
|
floppy->failed_pc = pc;
|
|
/* Set the current packet command */
|
|
floppy->pc = pc;
|
|
|
|
if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES) {
|
|
if (!(pc->flags & PC_FLAG_SUPPRESS_ERROR))
|
|
ide_floppy_report_error(floppy, pc);
|
|
/* Giving up */
|
|
pc->error = IDEFLOPPY_ERROR_GENERAL;
|
|
|
|
floppy->failed_pc = NULL;
|
|
pc->idefloppy_callback(drive);
|
|
return ide_stopped;
|
|
}
|
|
|
|
debug_log("Retry number - %d\n", pc->retries);
|
|
|
|
pc->retries++;
|
|
/* We haven't transferred any data yet */
|
|
pc->xferred = 0;
|
|
pc->cur_pos = pc->buf;
|
|
bcount = min(pc->req_xfer, 63 * 1024);
|
|
|
|
if (pc->flags & PC_FLAG_DMA_ERROR) {
|
|
pc->flags &= ~PC_FLAG_DMA_ERROR;
|
|
ide_dma_off(drive);
|
|
}
|
|
dma = 0;
|
|
|
|
if ((pc->flags & PC_FLAG_DMA_RECOMMENDED) && drive->using_dma)
|
|
dma = !hwif->dma_ops->dma_setup(drive);
|
|
|
|
ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_DEVICE, bcount, dma);
|
|
|
|
if (dma) {
|
|
/* Begin DMA, if necessary */
|
|
pc->flags |= PC_FLAG_DMA_IN_PROGRESS;
|
|
hwif->dma_ops->dma_start(drive);
|
|
}
|
|
|
|
if (floppy->flags & IDEFLOPPY_FLAG_DRQ_INTERRUPT) {
|
|
/* Issue the packet command */
|
|
ide_execute_command(drive, WIN_PACKETCMD,
|
|
&idefloppy_transfer_pc1,
|
|
IDEFLOPPY_WAIT_CMD,
|
|
NULL);
|
|
return ide_started;
|
|
} else {
|
|
/* Issue the packet command */
|
|
ide_execute_pkt_cmd(drive);
|
|
return idefloppy_transfer_pc1(drive);
|
|
}
|
|
}
|
|
|
|
static void idefloppy_rw_callback(ide_drive_t *drive)
|
|
{
|
|
debug_log("Reached %s\n", __func__);
|
|
|
|
idefloppy_end_request(drive, 1, 0);
|
|
return;
|
|
}
|
|
|
|
static void idefloppy_create_prevent_cmd(struct ide_atapi_pc *pc, int prevent)
|
|
{
|
|
debug_log("creating prevent removal command, prevent = %d\n", prevent);
|
|
|
|
idefloppy_init_pc(pc);
|
|
pc->c[0] = GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL;
|
|
pc->c[4] = prevent;
|
|
}
|
|
|
|
static void idefloppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
|
|
{
|
|
idefloppy_init_pc(pc);
|
|
pc->c[0] = GPCMD_READ_FORMAT_CAPACITIES;
|
|
pc->c[7] = 255;
|
|
pc->c[8] = 255;
|
|
pc->req_xfer = 255;
|
|
}
|
|
|
|
static void idefloppy_create_format_unit_cmd(struct ide_atapi_pc *pc, int b,
|
|
int l, int flags)
|
|
{
|
|
idefloppy_init_pc(pc);
|
|
pc->c[0] = GPCMD_FORMAT_UNIT;
|
|
pc->c[1] = 0x17;
|
|
|
|
memset(pc->buf, 0, 12);
|
|
pc->buf[1] = 0xA2;
|
|
/* Default format list header, u8 1: FOV/DCRT/IMM bits set */
|
|
|
|
if (flags & 1) /* Verify bit on... */
|
|
pc->buf[1] ^= 0x20; /* ... turn off DCRT bit */
|
|
pc->buf[3] = 8;
|
|
|
|
put_unaligned(cpu_to_be32(b), (unsigned int *)(&pc->buf[4]));
|
|
put_unaligned(cpu_to_be32(l), (unsigned int *)(&pc->buf[8]));
|
|
pc->buf_size = 12;
|
|
pc->flags |= PC_FLAG_WRITING;
|
|
}
|
|
|
|
/* A mode sense command is used to "sense" floppy parameters. */
|
|
static void idefloppy_create_mode_sense_cmd(struct ide_atapi_pc *pc,
|
|
u8 page_code, u8 type)
|
|
{
|
|
u16 length = 8; /* sizeof(Mode Parameter Header) = 8 Bytes */
|
|
|
|
idefloppy_init_pc(pc);
|
|
pc->c[0] = GPCMD_MODE_SENSE_10;
|
|
pc->c[1] = 0;
|
|
pc->c[2] = page_code + (type << 6);
|
|
|
|
switch (page_code) {
|
|
case IDEFLOPPY_CAPABILITIES_PAGE:
|
|
length += 12;
|
|
break;
|
|
case IDEFLOPPY_FLEXIBLE_DISK_PAGE:
|
|
length += 32;
|
|
break;
|
|
default:
|
|
printk(KERN_ERR "ide-floppy: unsupported page code "
|
|
"in create_mode_sense_cmd\n");
|
|
}
|
|
put_unaligned(cpu_to_be16(length), (u16 *) &pc->c[7]);
|
|
pc->req_xfer = length;
|
|
}
|
|
|
|
static void idefloppy_create_start_stop_cmd(struct ide_atapi_pc *pc, int start)
|
|
{
|
|
idefloppy_init_pc(pc);
|
|
pc->c[0] = GPCMD_START_STOP_UNIT;
|
|
pc->c[4] = start;
|
|
}
|
|
|
|
static void idefloppy_create_test_unit_ready_cmd(struct ide_atapi_pc *pc)
|
|
{
|
|
idefloppy_init_pc(pc);
|
|
pc->c[0] = GPCMD_TEST_UNIT_READY;
|
|
}
|
|
|
|
static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy,
|
|
struct ide_atapi_pc *pc, struct request *rq,
|
|
unsigned long sector)
|
|
{
|
|
int block = sector / floppy->bs_factor;
|
|
int blocks = rq->nr_sectors / floppy->bs_factor;
|
|
int cmd = rq_data_dir(rq);
|
|
|
|
debug_log("create_rw10_cmd: block == %d, blocks == %d\n",
|
|
block, blocks);
|
|
|
|
idefloppy_init_pc(pc);
|
|
pc->c[0] = cmd == READ ? GPCMD_READ_10 : GPCMD_WRITE_10;
|
|
put_unaligned(cpu_to_be16(blocks), (unsigned short *)&pc->c[7]);
|
|
put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[2]);
|
|
|
|
pc->idefloppy_callback = &idefloppy_rw_callback;
|
|
pc->rq = rq;
|
|
pc->b_count = cmd == READ ? 0 : rq->bio->bi_size;
|
|
if (rq->cmd_flags & REQ_RW)
|
|
pc->flags |= PC_FLAG_WRITING;
|
|
pc->buf = NULL;
|
|
pc->req_xfer = pc->buf_size = blocks * floppy->block_size;
|
|
pc->flags |= PC_FLAG_DMA_RECOMMENDED;
|
|
}
|
|
|
|
static void idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy,
|
|
struct ide_atapi_pc *pc, struct request *rq)
|
|
{
|
|
idefloppy_init_pc(pc);
|
|
pc->idefloppy_callback = &idefloppy_rw_callback;
|
|
memcpy(pc->c, rq->cmd, sizeof(pc->c));
|
|
pc->rq = rq;
|
|
pc->b_count = rq->data_len;
|
|
if (rq->data_len && rq_data_dir(rq) == WRITE)
|
|
pc->flags |= PC_FLAG_WRITING;
|
|
pc->buf = rq->data;
|
|
if (rq->bio)
|
|
pc->flags |= PC_FLAG_DMA_RECOMMENDED;
|
|
/*
|
|
* possibly problematic, doesn't look like ide-floppy correctly
|
|
* handled scattered requests if dma fails...
|
|
*/
|
|
pc->req_xfer = pc->buf_size = rq->data_len;
|
|
}
|
|
|
|
static ide_startstop_t idefloppy_do_request(ide_drive_t *drive,
|
|
struct request *rq, sector_t block_s)
|
|
{
|
|
idefloppy_floppy_t *floppy = drive->driver_data;
|
|
struct ide_atapi_pc *pc;
|
|
unsigned long block = (unsigned long)block_s;
|
|
|
|
debug_log("dev: %s, cmd_type: %x, errors: %d\n",
|
|
rq->rq_disk ? rq->rq_disk->disk_name : "?",
|
|
rq->cmd_type, rq->errors);
|
|
debug_log("sector: %ld, nr_sectors: %ld, "
|
|
"current_nr_sectors: %d\n", (long)rq->sector,
|
|
rq->nr_sectors, rq->current_nr_sectors);
|
|
|
|
if (rq->errors >= ERROR_MAX) {
|
|
if (floppy->failed_pc)
|
|
ide_floppy_report_error(floppy, floppy->failed_pc);
|
|
else
|
|
printk(KERN_ERR "ide-floppy: %s: I/O error\n",
|
|
drive->name);
|
|
idefloppy_end_request(drive, 0, 0);
|
|
return ide_stopped;
|
|
}
|
|
if (blk_fs_request(rq)) {
|
|
if (((long)rq->sector % floppy->bs_factor) ||
|
|
(rq->nr_sectors % floppy->bs_factor)) {
|
|
printk(KERN_ERR "%s: unsupported r/w request size\n",
|
|
drive->name);
|
|
idefloppy_end_request(drive, 0, 0);
|
|
return ide_stopped;
|
|
}
|
|
pc = idefloppy_next_pc_storage(drive);
|
|
idefloppy_create_rw_cmd(floppy, pc, rq, block);
|
|
} else if (blk_special_request(rq)) {
|
|
pc = (struct ide_atapi_pc *) rq->buffer;
|
|
} else if (blk_pc_request(rq)) {
|
|
pc = idefloppy_next_pc_storage(drive);
|
|
idefloppy_blockpc_cmd(floppy, pc, rq);
|
|
} else {
|
|
blk_dump_rq_flags(rq,
|
|
"ide-floppy: unsupported command in queue");
|
|
idefloppy_end_request(drive, 0, 0);
|
|
return ide_stopped;
|
|
}
|
|
|
|
pc->rq = rq;
|
|
return idefloppy_issue_pc(drive, pc);
|
|
}
|
|
|
|
/*
|
|
* Add a special packet command request to the tail of the request queue,
|
|
* and wait for it to be serviced.
|
|
*/
|
|
static int idefloppy_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc)
|
|
{
|
|
struct ide_floppy_obj *floppy = drive->driver_data;
|
|
struct request *rq;
|
|
int error;
|
|
|
|
rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
|
|
rq->buffer = (char *) pc;
|
|
rq->cmd_type = REQ_TYPE_SPECIAL;
|
|
error = blk_execute_rq(drive->queue, floppy->disk, rq, 0);
|
|
blk_put_request(rq);
|
|
|
|
return error;
|
|
}
|
|
|
|
/*
|
|
* Look at the flexible disk page parameters. We ignore the CHS capacity
|
|
* parameters and use the LBA parameters instead.
|
|
*/
|
|
static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive)
|
|
{
|
|
idefloppy_floppy_t *floppy = drive->driver_data;
|
|
struct ide_atapi_pc pc;
|
|
u8 *page;
|
|
int capacity, lba_capacity;
|
|
u16 transfer_rate, sector_size, cyls, rpm;
|
|
u8 heads, sectors;
|
|
|
|
idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE,
|
|
MODE_SENSE_CURRENT);
|
|
|
|
if (idefloppy_queue_pc_tail(drive, &pc)) {
|
|
printk(KERN_ERR "ide-floppy: Can't get flexible disk page"
|
|
" parameters\n");
|
|
return 1;
|
|
}
|
|
floppy->wp = !!(pc.buf[3] & 0x80);
|
|
set_disk_ro(floppy->disk, floppy->wp);
|
|
page = &pc.buf[8];
|
|
|
|
transfer_rate = be16_to_cpu(*(u16 *)&pc.buf[8 + 2]);
|
|
sector_size = be16_to_cpu(*(u16 *)&pc.buf[8 + 6]);
|
|
cyls = be16_to_cpu(*(u16 *)&pc.buf[8 + 8]);
|
|
rpm = be16_to_cpu(*(u16 *)&pc.buf[8 + 28]);
|
|
heads = pc.buf[8 + 4];
|
|
sectors = pc.buf[8 + 5];
|
|
|
|
capacity = cyls * heads * sectors * sector_size;
|
|
|
|
if (memcmp(page, &floppy->flexible_disk_page, 32))
|
|
printk(KERN_INFO "%s: %dkB, %d/%d/%d CHS, %d kBps, "
|
|
"%d sector size, %d rpm\n",
|
|
drive->name, capacity / 1024, cyls, heads,
|
|
sectors, transfer_rate / 8, sector_size, rpm);
|
|
|
|
memcpy(&floppy->flexible_disk_page, page, 32);
|
|
drive->bios_cyl = cyls;
|
|
drive->bios_head = heads;
|
|
drive->bios_sect = sectors;
|
|
lba_capacity = floppy->blocks * floppy->block_size;
|
|
|
|
if (capacity < lba_capacity) {
|
|
printk(KERN_NOTICE "%s: The disk reports a capacity of %d "
|
|
"bytes, but the drive only handles %d\n",
|
|
drive->name, lba_capacity, capacity);
|
|
floppy->blocks = floppy->block_size ?
|
|
capacity / floppy->block_size : 0;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int idefloppy_get_sfrp_bit(ide_drive_t *drive)
|
|
{
|
|
idefloppy_floppy_t *floppy = drive->driver_data;
|
|
struct ide_atapi_pc pc;
|
|
|
|
floppy->srfp = 0;
|
|
idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_CAPABILITIES_PAGE,
|
|
MODE_SENSE_CURRENT);
|
|
|
|
pc.flags |= PC_FLAG_SUPPRESS_ERROR;
|
|
if (idefloppy_queue_pc_tail(drive, &pc))
|
|
return 1;
|
|
|
|
floppy->srfp = pc.buf[8 + 2] & 0x40;
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Determine if a media is present in the floppy drive, and if so, its LBA
|
|
* capacity.
|
|
*/
|
|
static int ide_floppy_get_capacity(ide_drive_t *drive)
|
|
{
|
|
idefloppy_floppy_t *floppy = drive->driver_data;
|
|
struct ide_atapi_pc pc;
|
|
u8 *cap_desc;
|
|
u8 header_len, desc_cnt;
|
|
int i, rc = 1, blocks, length;
|
|
|
|
drive->bios_cyl = 0;
|
|
drive->bios_head = drive->bios_sect = 0;
|
|
floppy->blocks = 0;
|
|
floppy->bs_factor = 1;
|
|
set_capacity(floppy->disk, 0);
|
|
|
|
idefloppy_create_read_capacity_cmd(&pc);
|
|
if (idefloppy_queue_pc_tail(drive, &pc)) {
|
|
printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
|
|
return 1;
|
|
}
|
|
header_len = pc.buf[3];
|
|
cap_desc = &pc.buf[4];
|
|
desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */
|
|
|
|
for (i = 0; i < desc_cnt; i++) {
|
|
unsigned int desc_start = 4 + i*8;
|
|
|
|
blocks = be32_to_cpu(*(u32 *)&pc.buf[desc_start]);
|
|
length = be16_to_cpu(*(u16 *)&pc.buf[desc_start + 6]);
|
|
|
|
debug_log("Descriptor %d: %dkB, %d blocks, %d sector size\n",
|
|
i, blocks * length / 1024, blocks, length);
|
|
|
|
if (i)
|
|
continue;
|
|
/*
|
|
* the code below is valid only for the 1st descriptor, ie i=0
|
|
*/
|
|
|
|
switch (pc.buf[desc_start + 4] & 0x03) {
|
|
/* Clik! drive returns this instead of CAPACITY_CURRENT */
|
|
case CAPACITY_UNFORMATTED:
|
|
if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE))
|
|
/*
|
|
* If it is not a clik drive, break out
|
|
* (maintains previous driver behaviour)
|
|
*/
|
|
break;
|
|
case CAPACITY_CURRENT:
|
|
/* Normal Zip/LS-120 disks */
|
|
if (memcmp(cap_desc, &floppy->cap_desc, 8))
|
|
printk(KERN_INFO "%s: %dkB, %d blocks, %d "
|
|
"sector size\n", drive->name,
|
|
blocks * length / 1024, blocks, length);
|
|
memcpy(&floppy->cap_desc, cap_desc, 8);
|
|
|
|
if (!length || length % 512) {
|
|
printk(KERN_NOTICE "%s: %d bytes block size "
|
|
"not supported\n", drive->name, length);
|
|
} else {
|
|
floppy->blocks = blocks;
|
|
floppy->block_size = length;
|
|
floppy->bs_factor = length / 512;
|
|
if (floppy->bs_factor != 1)
|
|
printk(KERN_NOTICE "%s: warning: non "
|
|
"512 bytes block size not "
|
|
"fully supported\n",
|
|
drive->name);
|
|
rc = 0;
|
|
}
|
|
break;
|
|
case CAPACITY_NO_CARTRIDGE:
|
|
/*
|
|
* This is a KERN_ERR so it appears on screen
|
|
* for the user to see
|
|
*/
|
|
printk(KERN_ERR "%s: No disk in drive\n", drive->name);
|
|
break;
|
|
case CAPACITY_INVALID:
|
|
printk(KERN_ERR "%s: Invalid capacity for disk "
|
|
"in drive\n", drive->name);
|
|
break;
|
|
}
|
|
debug_log("Descriptor 0 Code: %d\n",
|
|
pc.buf[desc_start + 4] & 0x03);
|
|
}
|
|
|
|
/* Clik! disk does not support get_flexible_disk_page */
|
|
if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE))
|
|
(void) ide_floppy_get_flexible_disk_page(drive);
|
|
|
|
set_capacity(floppy->disk, floppy->blocks * floppy->bs_factor);
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* Obtain the list of formattable capacities.
|
|
* Very similar to ide_floppy_get_capacity, except that we push the capacity
|
|
* descriptors to userland, instead of our own structures.
|
|
*
|
|
* Userland gives us the following structure:
|
|
*
|
|
* struct idefloppy_format_capacities {
|
|
* int nformats;
|
|
* struct {
|
|
* int nblocks;
|
|
* int blocksize;
|
|
* } formats[];
|
|
* };
|
|
*
|
|
* userland initializes nformats to the number of allocated formats[] records.
|
|
* On exit we set nformats to the number of records we've actually initialized.
|
|
*/
|
|
|
|
static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
|
|
{
|
|
struct ide_atapi_pc pc;
|
|
u8 header_len, desc_cnt;
|
|
int i, blocks, length, u_array_size, u_index;
|
|
int __user *argp;
|
|
|
|
if (get_user(u_array_size, arg))
|
|
return (-EFAULT);
|
|
|
|
if (u_array_size <= 0)
|
|
return (-EINVAL);
|
|
|
|
idefloppy_create_read_capacity_cmd(&pc);
|
|
if (idefloppy_queue_pc_tail(drive, &pc)) {
|
|
printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
|
|
return (-EIO);
|
|
}
|
|
header_len = pc.buf[3];
|
|
desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */
|
|
|
|
u_index = 0;
|
|
argp = arg + 1;
|
|
|
|
/*
|
|
* We always skip the first capacity descriptor. That's the current
|
|
* capacity. We are interested in the remaining descriptors, the
|
|
* formattable capacities.
|
|
*/
|
|
for (i = 1; i < desc_cnt; i++) {
|
|
unsigned int desc_start = 4 + i*8;
|
|
|
|
if (u_index >= u_array_size)
|
|
break; /* User-supplied buffer too small */
|
|
|
|
blocks = be32_to_cpu(*(u32 *)&pc.buf[desc_start]);
|
|
length = be16_to_cpu(*(u16 *)&pc.buf[desc_start + 6]);
|
|
|
|
if (put_user(blocks, argp))
|
|
return(-EFAULT);
|
|
++argp;
|
|
|
|
if (put_user(length, argp))
|
|
return (-EFAULT);
|
|
++argp;
|
|
|
|
++u_index;
|
|
}
|
|
|
|
if (put_user(u_index, arg))
|
|
return (-EFAULT);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Get ATAPI_FORMAT_UNIT progress indication.
|
|
*
|
|
* Userland gives a pointer to an int. The int is set to a progress
|
|
* indicator 0-65536, with 65536=100%.
|
|
*
|
|
* If the drive does not support format progress indication, we just check
|
|
* the dsc bit, and return either 0 or 65536.
|
|
*/
|
|
|
|
static int idefloppy_get_format_progress(ide_drive_t *drive, int __user *arg)
|
|
{
|
|
idefloppy_floppy_t *floppy = drive->driver_data;
|
|
struct ide_atapi_pc pc;
|
|
int progress_indication = 0x10000;
|
|
|
|
if (floppy->srfp) {
|
|
idefloppy_create_request_sense_cmd(&pc);
|
|
if (idefloppy_queue_pc_tail(drive, &pc))
|
|
return (-EIO);
|
|
|
|
if (floppy->sense_key == 2 &&
|
|
floppy->asc == 4 &&
|
|
floppy->ascq == 4)
|
|
progress_indication = floppy->progress_indication;
|
|
|
|
/* Else assume format_unit has finished, and we're at 0x10000 */
|
|
} else {
|
|
unsigned long flags;
|
|
u8 stat;
|
|
|
|
local_irq_save(flags);
|
|
stat = ide_read_status(drive);
|
|
local_irq_restore(flags);
|
|
|
|
progress_indication = ((stat & SEEK_STAT) == 0) ? 0 : 0x10000;
|
|
}
|
|
if (put_user(progress_indication, arg))
|
|
return (-EFAULT);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static sector_t idefloppy_capacity(ide_drive_t *drive)
|
|
{
|
|
idefloppy_floppy_t *floppy = drive->driver_data;
|
|
unsigned long capacity = floppy->blocks * floppy->bs_factor;
|
|
|
|
return capacity;
|
|
}
|
|
|
|
/*
|
|
* Check whether we can support a drive, based on the ATAPI IDENTIFY command
|
|
* results.
|
|
*/
|
|
static int idefloppy_identify_device(ide_drive_t *drive, struct hd_driveid *id)
|
|
{
|
|
u8 gcw[2];
|
|
u8 device_type, protocol, removable, drq_type, packet_size;
|
|
|
|
*((u16 *) &gcw) = id->config;
|
|
|
|
device_type = gcw[1] & 0x1F;
|
|
removable = (gcw[0] & 0x80) >> 7;
|
|
protocol = (gcw[1] & 0xC0) >> 6;
|
|
drq_type = (gcw[0] & 0x60) >> 5;
|
|
packet_size = gcw[0] & 0x03;
|
|
|
|
#ifdef CONFIG_PPC
|
|
/* kludge for Apple PowerBook internal zip */
|
|
if (device_type == 5 &&
|
|
!strstr(id->model, "CD-ROM") && strstr(id->model, "ZIP"))
|
|
device_type = 0;
|
|
#endif
|
|
|
|
if (protocol != 2)
|
|
printk(KERN_ERR "ide-floppy: Protocol (0x%02x) is not ATAPI\n",
|
|
protocol);
|
|
else if (device_type != 0)
|
|
printk(KERN_ERR "ide-floppy: Device type (0x%02x) is not set "
|
|
"to floppy\n", device_type);
|
|
else if (!removable)
|
|
printk(KERN_ERR "ide-floppy: The removable flag is not set\n");
|
|
else if (drq_type == 3)
|
|
printk(KERN_ERR "ide-floppy: Sorry, DRQ type (0x%02x) not "
|
|
"supported\n", drq_type);
|
|
else if (packet_size != 0)
|
|
printk(KERN_ERR "ide-floppy: Packet size (0x%02x) is not 12 "
|
|
"bytes\n", packet_size);
|
|
else
|
|
return 1;
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_IDE_PROC_FS
|
|
static void idefloppy_add_settings(ide_drive_t *drive)
|
|
{
|
|
idefloppy_floppy_t *floppy = drive->driver_data;
|
|
|
|
ide_add_setting(drive, "bios_cyl", SETTING_RW, TYPE_INT, 0, 1023, 1, 1,
|
|
&drive->bios_cyl, NULL);
|
|
ide_add_setting(drive, "bios_head", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1,
|
|
&drive->bios_head, NULL);
|
|
ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE, 0, 63, 1, 1,
|
|
&drive->bios_sect, NULL);
|
|
ide_add_setting(drive, "ticks", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1,
|
|
&floppy->ticks, NULL);
|
|
}
|
|
#else
|
|
static inline void idefloppy_add_settings(ide_drive_t *drive) { ; }
|
|
#endif
|
|
|
|
static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy)
|
|
{
|
|
u8 gcw[2];
|
|
|
|
*((u16 *) &gcw) = drive->id->config;
|
|
floppy->pc = floppy->pc_stack;
|
|
|
|
if (((gcw[0] & 0x60) >> 5) == 1)
|
|
floppy->flags |= IDEFLOPPY_FLAG_DRQ_INTERRUPT;
|
|
/*
|
|
* We used to check revisions here. At this point however I'm giving up.
|
|
* Just assume they are all broken, its easier.
|
|
*
|
|
* The actual reason for the workarounds was likely a driver bug after
|
|
* all rather than a firmware bug, and the workaround below used to hide
|
|
* it. It should be fixed as of version 1.9, but to be on the safe side
|
|
* we'll leave the limitation below for the 2.2.x tree.
|
|
*/
|
|
if (!strncmp(drive->id->model, "IOMEGA ZIP 100 ATAPI", 20)) {
|
|
floppy->flags |= IDEFLOPPY_FLAG_ZIP_DRIVE;
|
|
/* This value will be visible in the /proc/ide/hdx/settings */
|
|
floppy->ticks = IDEFLOPPY_TICKS_DELAY;
|
|
blk_queue_max_sectors(drive->queue, 64);
|
|
}
|
|
|
|
/*
|
|
* Guess what? The IOMEGA Clik! drive also needs the above fix. It makes
|
|
* nasty clicking noises without it, so please don't remove this.
|
|
*/
|
|
if (strncmp(drive->id->model, "IOMEGA Clik!", 11) == 0) {
|
|
blk_queue_max_sectors(drive->queue, 64);
|
|
floppy->flags |= IDEFLOPPY_FLAG_CLIK_DRIVE;
|
|
}
|
|
|
|
(void) ide_floppy_get_capacity(drive);
|
|
idefloppy_add_settings(drive);
|
|
}
|
|
|
|
static void ide_floppy_remove(ide_drive_t *drive)
|
|
{
|
|
idefloppy_floppy_t *floppy = drive->driver_data;
|
|
struct gendisk *g = floppy->disk;
|
|
|
|
ide_proc_unregister_driver(drive, floppy->driver);
|
|
|
|
del_gendisk(g);
|
|
|
|
ide_floppy_put(floppy);
|
|
}
|
|
|
|
static void idefloppy_cleanup_obj(struct kref *kref)
|
|
{
|
|
struct ide_floppy_obj *floppy = to_ide_floppy(kref);
|
|
ide_drive_t *drive = floppy->drive;
|
|
struct gendisk *g = floppy->disk;
|
|
|
|
drive->driver_data = NULL;
|
|
g->private_data = NULL;
|
|
put_disk(g);
|
|
kfree(floppy);
|
|
}
|
|
|
|
#ifdef CONFIG_IDE_PROC_FS
|
|
static int proc_idefloppy_read_capacity(char *page, char **start, off_t off,
|
|
int count, int *eof, void *data)
|
|
{
|
|
ide_drive_t*drive = (ide_drive_t *)data;
|
|
int len;
|
|
|
|
len = sprintf(page, "%llu\n", (long long)idefloppy_capacity(drive));
|
|
PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
|
|
}
|
|
|
|
static ide_proc_entry_t idefloppy_proc[] = {
|
|
{ "capacity", S_IFREG|S_IRUGO, proc_idefloppy_read_capacity, NULL },
|
|
{ "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL },
|
|
{ NULL, 0, NULL, NULL }
|
|
};
|
|
#endif /* CONFIG_IDE_PROC_FS */
|
|
|
|
static int ide_floppy_probe(ide_drive_t *);
|
|
|
|
static ide_driver_t idefloppy_driver = {
|
|
.gen_driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "ide-floppy",
|
|
.bus = &ide_bus_type,
|
|
},
|
|
.probe = ide_floppy_probe,
|
|
.remove = ide_floppy_remove,
|
|
.version = IDEFLOPPY_VERSION,
|
|
.media = ide_floppy,
|
|
.supports_dsc_overlap = 0,
|
|
.do_request = idefloppy_do_request,
|
|
.end_request = idefloppy_end_request,
|
|
.error = __ide_error,
|
|
.abort = __ide_abort,
|
|
#ifdef CONFIG_IDE_PROC_FS
|
|
.proc = idefloppy_proc,
|
|
#endif
|
|
};
|
|
|
|
static int idefloppy_open(struct inode *inode, struct file *filp)
|
|
{
|
|
struct gendisk *disk = inode->i_bdev->bd_disk;
|
|
struct ide_floppy_obj *floppy;
|
|
ide_drive_t *drive;
|
|
struct ide_atapi_pc pc;
|
|
int ret = 0;
|
|
|
|
debug_log("Reached %s\n", __func__);
|
|
|
|
floppy = ide_floppy_get(disk);
|
|
if (!floppy)
|
|
return -ENXIO;
|
|
|
|
drive = floppy->drive;
|
|
|
|
floppy->openers++;
|
|
|
|
if (floppy->openers == 1) {
|
|
floppy->flags &= ~IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS;
|
|
/* Just in case */
|
|
|
|
idefloppy_create_test_unit_ready_cmd(&pc);
|
|
if (idefloppy_queue_pc_tail(drive, &pc)) {
|
|
idefloppy_create_start_stop_cmd(&pc, 1);
|
|
(void) idefloppy_queue_pc_tail(drive, &pc);
|
|
}
|
|
|
|
if (ide_floppy_get_capacity(drive)
|
|
&& (filp->f_flags & O_NDELAY) == 0
|
|
/*
|
|
* Allow O_NDELAY to open a drive without a disk, or with an
|
|
* unreadable disk, so that we can get the format capacity
|
|
* of the drive or begin the format - Sam
|
|
*/
|
|
) {
|
|
ret = -EIO;
|
|
goto out_put_floppy;
|
|
}
|
|
|
|
if (floppy->wp && (filp->f_mode & 2)) {
|
|
ret = -EROFS;
|
|
goto out_put_floppy;
|
|
}
|
|
floppy->flags |= IDEFLOPPY_FLAG_MEDIA_CHANGED;
|
|
/* IOMEGA Clik! drives do not support lock/unlock commands */
|
|
if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE)) {
|
|
idefloppy_create_prevent_cmd(&pc, 1);
|
|
(void) idefloppy_queue_pc_tail(drive, &pc);
|
|
}
|
|
check_disk_change(inode->i_bdev);
|
|
} else if (floppy->flags & IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS) {
|
|
ret = -EBUSY;
|
|
goto out_put_floppy;
|
|
}
|
|
return 0;
|
|
|
|
out_put_floppy:
|
|
floppy->openers--;
|
|
ide_floppy_put(floppy);
|
|
return ret;
|
|
}
|
|
|
|
static int idefloppy_release(struct inode *inode, struct file *filp)
|
|
{
|
|
struct gendisk *disk = inode->i_bdev->bd_disk;
|
|
struct ide_floppy_obj *floppy = ide_floppy_g(disk);
|
|
ide_drive_t *drive = floppy->drive;
|
|
struct ide_atapi_pc pc;
|
|
|
|
debug_log("Reached %s\n", __func__);
|
|
|
|
if (floppy->openers == 1) {
|
|
/* IOMEGA Clik! drives do not support lock/unlock commands */
|
|
if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE)) {
|
|
idefloppy_create_prevent_cmd(&pc, 0);
|
|
(void) idefloppy_queue_pc_tail(drive, &pc);
|
|
}
|
|
|
|
floppy->flags &= ~IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS;
|
|
}
|
|
|
|
floppy->openers--;
|
|
|
|
ide_floppy_put(floppy);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int idefloppy_getgeo(struct block_device *bdev, struct hd_geometry *geo)
|
|
{
|
|
struct ide_floppy_obj *floppy = ide_floppy_g(bdev->bd_disk);
|
|
ide_drive_t *drive = floppy->drive;
|
|
|
|
geo->heads = drive->bios_head;
|
|
geo->sectors = drive->bios_sect;
|
|
geo->cylinders = (u16)drive->bios_cyl; /* truncate */
|
|
return 0;
|
|
}
|
|
|
|
static int ide_floppy_lockdoor(idefloppy_floppy_t *floppy,
|
|
struct ide_atapi_pc *pc, unsigned long arg, unsigned int cmd)
|
|
{
|
|
if (floppy->openers > 1)
|
|
return -EBUSY;
|
|
|
|
/* The IOMEGA Clik! Drive doesn't support this command -
|
|
* no room for an eject mechanism */
|
|
if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE)) {
|
|
int prevent = arg ? 1 : 0;
|
|
|
|
if (cmd == CDROMEJECT)
|
|
prevent = 0;
|
|
|
|
idefloppy_create_prevent_cmd(pc, prevent);
|
|
(void) idefloppy_queue_pc_tail(floppy->drive, pc);
|
|
}
|
|
|
|
if (cmd == CDROMEJECT) {
|
|
idefloppy_create_start_stop_cmd(pc, 2);
|
|
(void) idefloppy_queue_pc_tail(floppy->drive, pc);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ide_floppy_format_unit(idefloppy_floppy_t *floppy,
|
|
int __user *arg)
|
|
{
|
|
int blocks, length, flags, err = 0;
|
|
struct ide_atapi_pc pc;
|
|
|
|
if (floppy->openers > 1) {
|
|
/* Don't format if someone is using the disk */
|
|
floppy->flags &= ~IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS;
|
|
return -EBUSY;
|
|
}
|
|
|
|
floppy->flags |= IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS;
|
|
|
|
/*
|
|
* Send ATAPI_FORMAT_UNIT to the drive.
|
|
*
|
|
* Userland gives us the following structure:
|
|
*
|
|
* struct idefloppy_format_command {
|
|
* int nblocks;
|
|
* int blocksize;
|
|
* int flags;
|
|
* } ;
|
|
*
|
|
* flags is a bitmask, currently, the only defined flag is:
|
|
*
|
|
* 0x01 - verify media after format.
|
|
*/
|
|
if (get_user(blocks, arg) ||
|
|
get_user(length, arg+1) ||
|
|
get_user(flags, arg+2)) {
|
|
err = -EFAULT;
|
|
goto out;
|
|
}
|
|
|
|
(void) idefloppy_get_sfrp_bit(floppy->drive);
|
|
idefloppy_create_format_unit_cmd(&pc, blocks, length, flags);
|
|
|
|
if (idefloppy_queue_pc_tail(floppy->drive, &pc))
|
|
err = -EIO;
|
|
|
|
out:
|
|
if (err)
|
|
floppy->flags &= ~IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS;
|
|
return err;
|
|
}
|
|
|
|
|
|
static int idefloppy_ioctl(struct inode *inode, struct file *file,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
struct block_device *bdev = inode->i_bdev;
|
|
struct ide_floppy_obj *floppy = ide_floppy_g(bdev->bd_disk);
|
|
ide_drive_t *drive = floppy->drive;
|
|
struct ide_atapi_pc pc;
|
|
void __user *argp = (void __user *)arg;
|
|
int err;
|
|
|
|
switch (cmd) {
|
|
case CDROMEJECT:
|
|
/* fall through */
|
|
case CDROM_LOCKDOOR:
|
|
return ide_floppy_lockdoor(floppy, &pc, arg, cmd);
|
|
case IDEFLOPPY_IOCTL_FORMAT_SUPPORTED:
|
|
return 0;
|
|
case IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY:
|
|
return ide_floppy_get_format_capacities(drive, argp);
|
|
case IDEFLOPPY_IOCTL_FORMAT_START:
|
|
if (!(file->f_mode & 2))
|
|
return -EPERM;
|
|
|
|
return ide_floppy_format_unit(floppy, (int __user *)arg);
|
|
case IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS:
|
|
return idefloppy_get_format_progress(drive, argp);
|
|
}
|
|
|
|
/*
|
|
* skip SCSI_IOCTL_SEND_COMMAND (deprecated)
|
|
* and CDROM_SEND_PACKET (legacy) ioctls
|
|
*/
|
|
if (cmd != CDROM_SEND_PACKET && cmd != SCSI_IOCTL_SEND_COMMAND)
|
|
err = scsi_cmd_ioctl(file, bdev->bd_disk->queue,
|
|
bdev->bd_disk, cmd, argp);
|
|
else
|
|
err = -ENOTTY;
|
|
|
|
if (err == -ENOTTY)
|
|
err = generic_ide_ioctl(drive, file, bdev, cmd, arg);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int idefloppy_media_changed(struct gendisk *disk)
|
|
{
|
|
struct ide_floppy_obj *floppy = ide_floppy_g(disk);
|
|
ide_drive_t *drive = floppy->drive;
|
|
int ret;
|
|
|
|
/* do not scan partitions twice if this is a removable device */
|
|
if (drive->attach) {
|
|
drive->attach = 0;
|
|
return 0;
|
|
}
|
|
ret = !!(floppy->flags & IDEFLOPPY_FLAG_MEDIA_CHANGED);
|
|
floppy->flags &= ~IDEFLOPPY_FLAG_MEDIA_CHANGED;
|
|
return ret;
|
|
}
|
|
|
|
static int idefloppy_revalidate_disk(struct gendisk *disk)
|
|
{
|
|
struct ide_floppy_obj *floppy = ide_floppy_g(disk);
|
|
set_capacity(disk, idefloppy_capacity(floppy->drive));
|
|
return 0;
|
|
}
|
|
|
|
static struct block_device_operations idefloppy_ops = {
|
|
.owner = THIS_MODULE,
|
|
.open = idefloppy_open,
|
|
.release = idefloppy_release,
|
|
.ioctl = idefloppy_ioctl,
|
|
.getgeo = idefloppy_getgeo,
|
|
.media_changed = idefloppy_media_changed,
|
|
.revalidate_disk = idefloppy_revalidate_disk
|
|
};
|
|
|
|
static int ide_floppy_probe(ide_drive_t *drive)
|
|
{
|
|
idefloppy_floppy_t *floppy;
|
|
struct gendisk *g;
|
|
|
|
if (!strstr("ide-floppy", drive->driver_req))
|
|
goto failed;
|
|
if (!drive->present)
|
|
goto failed;
|
|
if (drive->media != ide_floppy)
|
|
goto failed;
|
|
if (!idefloppy_identify_device(drive, drive->id)) {
|
|
printk(KERN_ERR "ide-floppy: %s: not supported by this version"
|
|
" of ide-floppy\n", drive->name);
|
|
goto failed;
|
|
}
|
|
if (drive->scsi) {
|
|
printk(KERN_INFO "ide-floppy: passing drive %s to ide-scsi"
|
|
" emulation.\n", drive->name);
|
|
goto failed;
|
|
}
|
|
floppy = kzalloc(sizeof(idefloppy_floppy_t), GFP_KERNEL);
|
|
if (!floppy) {
|
|
printk(KERN_ERR "ide-floppy: %s: Can't allocate a floppy"
|
|
" structure\n", drive->name);
|
|
goto failed;
|
|
}
|
|
|
|
g = alloc_disk(1 << PARTN_BITS);
|
|
if (!g)
|
|
goto out_free_floppy;
|
|
|
|
ide_init_disk(g, drive);
|
|
|
|
ide_proc_register_driver(drive, &idefloppy_driver);
|
|
|
|
kref_init(&floppy->kref);
|
|
|
|
floppy->drive = drive;
|
|
floppy->driver = &idefloppy_driver;
|
|
floppy->disk = g;
|
|
|
|
g->private_data = &floppy->driver;
|
|
|
|
drive->driver_data = floppy;
|
|
|
|
idefloppy_setup(drive, floppy);
|
|
|
|
g->minors = 1 << PARTN_BITS;
|
|
g->driverfs_dev = &drive->gendev;
|
|
g->flags = drive->removable ? GENHD_FL_REMOVABLE : 0;
|
|
g->fops = &idefloppy_ops;
|
|
drive->attach = 1;
|
|
add_disk(g);
|
|
return 0;
|
|
|
|
out_free_floppy:
|
|
kfree(floppy);
|
|
failed:
|
|
return -ENODEV;
|
|
}
|
|
|
|
static void __exit idefloppy_exit(void)
|
|
{
|
|
driver_unregister(&idefloppy_driver.gen_driver);
|
|
}
|
|
|
|
static int __init idefloppy_init(void)
|
|
{
|
|
printk("ide-floppy driver " IDEFLOPPY_VERSION "\n");
|
|
return driver_register(&idefloppy_driver.gen_driver);
|
|
}
|
|
|
|
MODULE_ALIAS("ide:*m-floppy*");
|
|
module_init(idefloppy_init);
|
|
module_exit(idefloppy_exit);
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("ATAPI FLOPPY Driver");
|
|
|