linux/drivers/net/wireless/rtl8180_max2820.c
Michael Wu f653211197 Add rtl8180 wireless driver
This patch adds a mac80211 based wireless driver for the rtl8180 and
rtl8185 PCI wireless cards.  Also included are some rtl8187 changes
required due to the relationship between that driver and this one.

Michael Wu is primarily responsible for the initial driver and rtl8185
support.  Andreas Merello provided the additional rtl8180 support.

Thanks to Jukka Ruohonen for the donating a rtl8185 card! It was very
helpful for the rtl8225z2 code.

The Signed-off-by information below is collected from the individual
patches submitted to wireless-2.6 before merging this driver upstream.

Signed-off-by: Andrea Merello <andreamrl@tiscali.it>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:35 -08:00

150 lines
3.7 KiB
C

/*
* Radio tuning for Maxim max2820 on RTL8180
*
* Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
*
* Code from the BSD driver and the rtl8181 project have been
* very useful to understand certain things
*
* I want to thanks the Authors of such projects and the Ndiswrapper
* project Authors.
*
* A special Big Thanks also is for all people who donated me cards,
* making possible the creation of the original rtl8180 driver
* from which this code is derived!
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <net/mac80211.h>
#include "rtl8180.h"
#include "rtl8180_max2820.h"
static const u32 max2820_chan[] = {
12, /* CH 1 */
17,
22,
27,
32,
37,
42,
47,
52,
57,
62,
67,
72,
84, /* CH 14 */
};
static void write_max2820(struct ieee80211_hw *dev, u8 addr, u32 data)
{
struct rtl8180_priv *priv = dev->priv;
u32 phy_config;
phy_config = 0x90 + (data & 0xf);
phy_config <<= 16;
phy_config += addr;
phy_config <<= 8;
phy_config += (data >> 4) & 0xff;
rtl818x_iowrite32(priv,
(__le32 __iomem *) &priv->map->RFPinsOutput, phy_config);
msleep(1);
}
static void max2820_write_phy_antenna(struct ieee80211_hw *dev, short chan)
{
struct rtl8180_priv *priv = dev->priv;
u8 ant;
ant = MAXIM_ANTENNA;
if (priv->rfparam & RF_PARAM_ANTBDEFAULT)
ant |= BB_ANTENNA_B;
if (chan == 14)
ant |= BB_ANTATTEN_CHAN14;
rtl8180_write_phy(dev, 0x10, ant);
}
static void max2820_rf_set_channel(struct ieee80211_hw *dev,
struct ieee80211_conf *conf)
{
struct rtl8180_priv *priv = dev->priv;
unsigned int chan_idx = conf ? conf->channel - 1 : 0;
u32 txpw = priv->channels[chan_idx].val & 0xFF;
u32 chan = max2820_chan[chan_idx];
/* While philips SA2400 drive the PA bias from
* sa2400, for MAXIM we do this directly from BB */
rtl8180_write_phy(dev, 3, txpw);
max2820_write_phy_antenna(dev, chan);
write_max2820(dev, 3, chan);
}
static void max2820_rf_stop(struct ieee80211_hw *dev)
{
rtl8180_write_phy(dev, 3, 0x8);
write_max2820(dev, 1, 0);
}
static void max2820_rf_init(struct ieee80211_hw *dev)
{
struct rtl8180_priv *priv = dev->priv;
/* MAXIM from netbsd driver */
write_max2820(dev, 0, 0x007); /* test mode as indicated in datasheet */
write_max2820(dev, 1, 0x01e); /* enable register */
write_max2820(dev, 2, 0x001); /* synt register */
max2820_rf_set_channel(dev, NULL);
write_max2820(dev, 4, 0x313); /* rx register */
/* PA is driven directly by the BB, we keep the MAXIM bias
* at the highest value in case that setting it to lower
* values may introduce some further attenuation somewhere..
*/
write_max2820(dev, 5, 0x00f);
/* baseband configuration */
rtl8180_write_phy(dev, 0, 0x88); /* sys1 */
rtl8180_write_phy(dev, 3, 0x08); /* txagc */
rtl8180_write_phy(dev, 4, 0xf8); /* lnadet */
rtl8180_write_phy(dev, 5, 0x90); /* ifagcinit */
rtl8180_write_phy(dev, 6, 0x1a); /* ifagclimit */
rtl8180_write_phy(dev, 7, 0x64); /* ifagcdet */
max2820_write_phy_antenna(dev, 1);
rtl8180_write_phy(dev, 0x11, 0x88); /* trl */
if (rtl818x_ioread8(priv, &priv->map->CONFIG2) &
RTL818X_CONFIG2_ANTENNA_DIV)
rtl8180_write_phy(dev, 0x12, 0xc7);
else
rtl8180_write_phy(dev, 0x12, 0x47);
rtl8180_write_phy(dev, 0x13, 0x9b);
rtl8180_write_phy(dev, 0x19, 0x0); /* CHESTLIM */
rtl8180_write_phy(dev, 0x1a, 0x9f); /* CHSQLIM */
max2820_rf_set_channel(dev, NULL);
}
const struct rtl818x_rf_ops max2820_rf_ops = {
.name = "Maxim",
.init = max2820_rf_init,
.stop = max2820_rf_stop,
.set_chan = max2820_rf_set_channel
};