linux/drivers/net/wireless/prism54/islpci_dev.h
Matthias Kaehlcke f948db5de5 prism54: Convert wpa_sem in a mutex
The semaphore wpa_sem is used as mutex, convert it to the mutex API

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Acked-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29 15:37:17 -05:00

219 lines
7 KiB
C

/*
* Copyright (C) 2002 Intersil Americas Inc.
* Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org>
* Copyright (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>
* Copyright (C) 2003 Aurelien Alleaume <slts@free.fr>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#ifndef _ISLPCI_DEV_H
#define _ISLPCI_DEV_H
#include <linux/netdevice.h>
#include <linux/wireless.h>
#include <net/iw_handler.h>
#include <linux/list.h>
#include <linux/mutex.h>
#include "isl_38xx.h"
#include "isl_oid.h"
#include "islpci_mgt.h"
/* some states might not be superflous and may be removed when
design is finalized (hvr) */
typedef enum {
PRV_STATE_OFF = 0, /* this means hw_unavailable is != 0 */
PRV_STATE_PREBOOT, /* we are in a pre-boot state (empty RAM) */
PRV_STATE_BOOT, /* boot state (fw upload, run fw) */
PRV_STATE_POSTBOOT, /* after boot state, need reset now */
PRV_STATE_PREINIT, /* pre-init state */
PRV_STATE_INIT, /* init state (restore MIB backup to device) */
PRV_STATE_READY, /* driver&device are in operational state */
PRV_STATE_SLEEP /* device in sleep mode */
} islpci_state_t;
/* ACL using MAC address */
struct mac_entry {
struct list_head _list;
char addr[ETH_ALEN];
};
struct islpci_acl {
enum { MAC_POLICY_OPEN=0, MAC_POLICY_ACCEPT=1, MAC_POLICY_REJECT=2 } policy;
struct list_head mac_list; /* a list of mac_entry */
int size; /* size of queue */
struct mutex lock; /* accessed in ioctls and trap_work */
};
struct islpci_membuf {
int size; /* size of memory */
void *mem; /* address of memory as seen by CPU */
dma_addr_t pci_addr; /* address of memory as seen by device */
};
#define MAX_BSS_WPA_IE_COUNT 64
#define MAX_WPA_IE_LEN 64
struct islpci_bss_wpa_ie {
struct list_head list;
unsigned long last_update;
u8 bssid[ETH_ALEN];
u8 wpa_ie[MAX_WPA_IE_LEN];
size_t wpa_ie_len;
};
typedef struct {
spinlock_t slock; /* generic spinlock; */
u32 priv_oid;
/* our mib cache */
u32 iw_mode;
struct rw_semaphore mib_sem;
void **mib;
char nickname[IW_ESSID_MAX_SIZE+1];
/* Take care of the wireless stats */
struct work_struct stats_work;
struct mutex stats_lock;
/* remember when we last updated the stats */
unsigned long stats_timestamp;
/* The first is accessed under semaphore locking.
* The second is the clean one we return to iwconfig.
*/
struct iw_statistics local_iwstatistics;
struct iw_statistics iwstatistics;
struct iw_spy_data spy_data; /* iwspy support */
struct iw_public_data wireless_data;
int monitor_type; /* ARPHRD_IEEE80211 or ARPHRD_IEEE80211_PRISM */
struct islpci_acl acl;
/* PCI bus allocation & configuration members */
struct pci_dev *pdev; /* PCI structure information */
char firmware[33];
void __iomem *device_base; /* ioremapped device base address */
/* consistent DMA region */
void *driver_mem_address; /* base DMA address */
dma_addr_t device_host_address; /* base DMA address (bus address) */
dma_addr_t device_psm_buffer; /* host memory for PSM buffering (bus address) */
/* our network_device structure */
struct net_device *ndev;
/* device queue interface members */
struct isl38xx_cb *control_block; /* device control block
(== driver_mem_address!) */
/* Each queue has three indexes:
* free/index_mgmt/data_rx/tx (called index, see below),
* driver_curr_frag, and device_curr_frag (in the control block)
* All indexes are ever-increasing, but interpreted modulo the
* device queue size when used.
* index <= device_curr_frag <= driver_curr_frag at all times
* For rx queues, [index, device_curr_frag) contains fragments
* that the interrupt processing needs to handle (owned by driver).
* [device_curr_frag, driver_curr_frag) is the free space in the
* rx queue, waiting for data (owned by device). The driver
* increments driver_curr_frag to indicate to the device that more
* buffers are available.
* If device_curr_frag == driver_curr_frag, no more rx buffers are
* available, and the rx DMA engine of the device is halted.
* For tx queues, [index, device_curr_frag) contains fragments
* where tx is done; they need to be freed (owned by driver).
* [device_curr_frag, driver_curr_frag) contains the frames
* that are being transferred (owned by device). The driver
* increments driver_curr_frag to indicate that more tx work
* needs to be done.
*/
u32 index_mgmt_rx; /* real index mgmt rx queue */
u32 index_mgmt_tx; /* read index mgmt tx queue */
u32 free_data_rx; /* free pointer data rx queue */
u32 free_data_tx; /* free pointer data tx queue */
u32 data_low_tx_full; /* full detected flag */
/* frame memory buffers for the device queues */
struct islpci_membuf mgmt_tx[ISL38XX_CB_MGMT_QSIZE];
struct islpci_membuf mgmt_rx[ISL38XX_CB_MGMT_QSIZE];
struct sk_buff *data_low_tx[ISL38XX_CB_TX_QSIZE];
struct sk_buff *data_low_rx[ISL38XX_CB_RX_QSIZE];
dma_addr_t pci_map_tx_address[ISL38XX_CB_TX_QSIZE];
dma_addr_t pci_map_rx_address[ISL38XX_CB_RX_QSIZE];
/* driver network interface members */
struct net_device_stats statistics;
/* wait for a reset interrupt */
wait_queue_head_t reset_done;
/* used by islpci_mgt_transaction */
struct mutex mgmt_lock; /* serialize access to mailbox and wqueue */
struct islpci_mgmtframe *mgmt_received; /* mbox for incoming frame */
wait_queue_head_t mgmt_wqueue; /* waitqueue for mbox */
/* state machine */
islpci_state_t state;
int state_off; /* enumeration of off-state, if 0 then
* we're not in any off-state */
/* WPA stuff */
int wpa; /* WPA mode enabled */
struct list_head bss_wpa_list;
int num_bss_wpa;
struct mutex wpa_lock;
u8 wpa_ie[MAX_WPA_IE_LEN];
size_t wpa_ie_len;
struct work_struct reset_task;
int reset_task_pending;
} islpci_private;
static inline islpci_state_t
islpci_get_state(islpci_private *priv)
{
/* lock */
return priv->state;
/* unlock */
}
islpci_state_t islpci_set_state(islpci_private *priv, islpci_state_t new_state);
#define ISLPCI_TX_TIMEOUT (2*HZ)
irqreturn_t islpci_interrupt(int, void *);
int prism54_post_setup(islpci_private *, int);
int islpci_reset(islpci_private *, int);
static inline void
islpci_trigger(islpci_private *priv)
{
isl38xx_trigger_device(islpci_get_state(priv) == PRV_STATE_SLEEP,
priv->device_base);
}
int islpci_free_memory(islpci_private *);
struct net_device *islpci_setup(struct pci_dev *);
#define DRV_NAME "prism54"
#define DRV_VERSION "1.2"
#endif /* _ISLPCI_DEV_H */