d3245b28ef
Refactor PHY, MAC and NIC configuration operations so that the
existing link configuration can be re-pushed with:
efx->phy_op->reconfigure(efx);
efx->mac_op->reconfigure(efx);
and a new configuration with:
efx->nic_op->reconfigure_port(efx);
(plus locking and error-checking).
We have not held the link settings in software (aside from flow
control), and have relied on asking the hardware what they are. This
is a problem because in some cases the hardware may no longer be in a
state to tell us. In particular, if an entire multi-port board is
reset through one port, the driver bindings to other ports have no
chance to save settings before recovering.
We only actually need to keep track of the autonegotiation settings,
so add an ethtool advertising mask to struct efx_nic, initialise it
in PHY init and update it as necessary.
Remove now-unneeded uses of efx_phy_op::{get,set}_settings() and
struct ethtool_cmd.
Much of this was done by Steve Hodgson <shodgson@solarflare.com>.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
236 lines
6 KiB
C
236 lines
6 KiB
C
/****************************************************************************
|
|
* Driver for Solarflare Solarstorm network controllers and boards
|
|
* Copyright 2006-2008 Solarflare Communications Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation, incorporated herein by reference.
|
|
*/
|
|
/*
|
|
* Driver for AMCC QT202x SFP+ and XFP adapters; see www.amcc.com for details
|
|
*/
|
|
|
|
#include <linux/timer.h>
|
|
#include <linux/delay.h>
|
|
#include "efx.h"
|
|
#include "mdio_10g.h"
|
|
#include "phy.h"
|
|
#include "falcon.h"
|
|
|
|
#define QT202X_REQUIRED_DEVS (MDIO_DEVS_PCS | \
|
|
MDIO_DEVS_PMAPMD | \
|
|
MDIO_DEVS_PHYXS)
|
|
|
|
#define QT202X_LOOPBACKS ((1 << LOOPBACK_PCS) | \
|
|
(1 << LOOPBACK_PMAPMD) | \
|
|
(1 << LOOPBACK_NETWORK))
|
|
|
|
/****************************************************************************/
|
|
/* Quake-specific MDIO registers */
|
|
#define MDIO_QUAKE_LED0_REG (0xD006)
|
|
|
|
/* QT2025C only */
|
|
#define PCS_FW_HEARTBEAT_REG 0xd7ee
|
|
#define PCS_FW_HEARTB_LBN 0
|
|
#define PCS_FW_HEARTB_WIDTH 8
|
|
#define PCS_UC8051_STATUS_REG 0xd7fd
|
|
#define PCS_UC_STATUS_LBN 0
|
|
#define PCS_UC_STATUS_WIDTH 8
|
|
#define PCS_UC_STATUS_FW_SAVE 0x20
|
|
#define PMA_PMD_FTX_CTRL2_REG 0xc309
|
|
#define PMA_PMD_FTX_STATIC_LBN 13
|
|
#define PMA_PMD_VEND1_REG 0xc001
|
|
#define PMA_PMD_VEND1_LBTXD_LBN 15
|
|
#define PCS_VEND1_REG 0xc000
|
|
#define PCS_VEND1_LBTXD_LBN 5
|
|
|
|
void falcon_qt202x_set_led(struct efx_nic *p, int led, int mode)
|
|
{
|
|
int addr = MDIO_QUAKE_LED0_REG + led;
|
|
efx_mdio_write(p, MDIO_MMD_PMAPMD, addr, mode);
|
|
}
|
|
|
|
struct qt202x_phy_data {
|
|
enum efx_phy_mode phy_mode;
|
|
};
|
|
|
|
#define QT2022C2_MAX_RESET_TIME 500
|
|
#define QT2022C2_RESET_WAIT 10
|
|
|
|
static int qt2025c_wait_reset(struct efx_nic *efx)
|
|
{
|
|
unsigned long timeout = jiffies + 10 * HZ;
|
|
int reg, old_counter = 0;
|
|
|
|
/* Wait for firmware heartbeat to start */
|
|
for (;;) {
|
|
int counter;
|
|
reg = efx_mdio_read(efx, MDIO_MMD_PCS, PCS_FW_HEARTBEAT_REG);
|
|
if (reg < 0)
|
|
return reg;
|
|
counter = ((reg >> PCS_FW_HEARTB_LBN) &
|
|
((1 << PCS_FW_HEARTB_WIDTH) - 1));
|
|
if (old_counter == 0)
|
|
old_counter = counter;
|
|
else if (counter != old_counter)
|
|
break;
|
|
if (time_after(jiffies, timeout))
|
|
return -ETIMEDOUT;
|
|
msleep(10);
|
|
}
|
|
|
|
/* Wait for firmware status to look good */
|
|
for (;;) {
|
|
reg = efx_mdio_read(efx, MDIO_MMD_PCS, PCS_UC8051_STATUS_REG);
|
|
if (reg < 0)
|
|
return reg;
|
|
if ((reg &
|
|
((1 << PCS_UC_STATUS_WIDTH) - 1) << PCS_UC_STATUS_LBN) >=
|
|
PCS_UC_STATUS_FW_SAVE)
|
|
break;
|
|
if (time_after(jiffies, timeout))
|
|
return -ETIMEDOUT;
|
|
msleep(100);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qt202x_reset_phy(struct efx_nic *efx)
|
|
{
|
|
int rc;
|
|
|
|
if (efx->phy_type == PHY_TYPE_QT2025C) {
|
|
/* Wait for the reset triggered by falcon_reset_hw()
|
|
* to complete */
|
|
rc = qt2025c_wait_reset(efx);
|
|
if (rc < 0)
|
|
goto fail;
|
|
} else {
|
|
/* Reset the PHYXS MMD. This is documented as doing
|
|
* a complete soft reset. */
|
|
rc = efx_mdio_reset_mmd(efx, MDIO_MMD_PHYXS,
|
|
QT2022C2_MAX_RESET_TIME /
|
|
QT2022C2_RESET_WAIT,
|
|
QT2022C2_RESET_WAIT);
|
|
if (rc < 0)
|
|
goto fail;
|
|
}
|
|
|
|
/* Wait 250ms for the PHY to complete bootup */
|
|
msleep(250);
|
|
|
|
/* Check that all the MMDs we expect are present and responding. We
|
|
* expect faults on some if the link is down, but not on the PHY XS */
|
|
rc = efx_mdio_check_mmds(efx, QT202X_REQUIRED_DEVS, MDIO_DEVS_PHYXS);
|
|
if (rc < 0)
|
|
goto fail;
|
|
|
|
falcon_board(efx)->type->init_phy(efx);
|
|
|
|
return rc;
|
|
|
|
fail:
|
|
EFX_ERR(efx, "PHY reset timed out\n");
|
|
return rc;
|
|
}
|
|
|
|
static int qt202x_phy_init(struct efx_nic *efx)
|
|
{
|
|
struct qt202x_phy_data *phy_data;
|
|
u32 devid;
|
|
int rc;
|
|
|
|
rc = qt202x_reset_phy(efx);
|
|
if (rc) {
|
|
EFX_ERR(efx, "PHY init failed\n");
|
|
return rc;
|
|
}
|
|
|
|
phy_data = kzalloc(sizeof(struct qt202x_phy_data), GFP_KERNEL);
|
|
if (!phy_data)
|
|
return -ENOMEM;
|
|
efx->phy_data = phy_data;
|
|
|
|
devid = efx_mdio_read_id(efx, MDIO_MMD_PHYXS);
|
|
EFX_INFO(efx, "PHY ID reg %x (OUI %06x model %02x revision %x)\n",
|
|
devid, efx_mdio_id_oui(devid), efx_mdio_id_model(devid),
|
|
efx_mdio_id_rev(devid));
|
|
|
|
phy_data->phy_mode = efx->phy_mode;
|
|
return 0;
|
|
}
|
|
|
|
static int qt202x_link_ok(struct efx_nic *efx)
|
|
{
|
|
return efx_mdio_links_ok(efx, QT202X_REQUIRED_DEVS);
|
|
}
|
|
|
|
static bool qt202x_phy_poll(struct efx_nic *efx)
|
|
{
|
|
bool was_up = efx->link_state.up;
|
|
|
|
efx->link_state.up = qt202x_link_ok(efx);
|
|
efx->link_state.speed = 10000;
|
|
efx->link_state.fd = true;
|
|
efx->link_state.fc = efx->wanted_fc;
|
|
|
|
return efx->link_state.up != was_up;
|
|
}
|
|
|
|
static int qt202x_phy_reconfigure(struct efx_nic *efx)
|
|
{
|
|
struct qt202x_phy_data *phy_data = efx->phy_data;
|
|
|
|
if (efx->phy_type == PHY_TYPE_QT2025C) {
|
|
/* There are several different register bits which can
|
|
* disable TX (and save power) on direct-attach cables
|
|
* or optical transceivers, varying somewhat between
|
|
* firmware versions. Only 'static mode' appears to
|
|
* cover everything. */
|
|
mdio_set_flag(
|
|
&efx->mdio, efx->mdio.prtad, MDIO_MMD_PMAPMD,
|
|
PMA_PMD_FTX_CTRL2_REG, 1 << PMA_PMD_FTX_STATIC_LBN,
|
|
efx->phy_mode & PHY_MODE_TX_DISABLED ||
|
|
efx->phy_mode & PHY_MODE_LOW_POWER ||
|
|
efx->loopback_mode == LOOPBACK_PCS ||
|
|
efx->loopback_mode == LOOPBACK_PMAPMD);
|
|
} else {
|
|
/* Reset the PHY when moving from tx off to tx on */
|
|
if (!(efx->phy_mode & PHY_MODE_TX_DISABLED) &&
|
|
(phy_data->phy_mode & PHY_MODE_TX_DISABLED))
|
|
qt202x_reset_phy(efx);
|
|
|
|
efx_mdio_transmit_disable(efx);
|
|
}
|
|
|
|
efx_mdio_phy_reconfigure(efx);
|
|
|
|
phy_data->phy_mode = efx->phy_mode;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void qt202x_phy_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
|
|
{
|
|
mdio45_ethtool_gset(&efx->mdio, ecmd);
|
|
}
|
|
|
|
static void qt202x_phy_fini(struct efx_nic *efx)
|
|
{
|
|
/* Free the context block */
|
|
kfree(efx->phy_data);
|
|
efx->phy_data = NULL;
|
|
}
|
|
|
|
struct efx_phy_operations falcon_qt202x_phy_ops = {
|
|
.macs = EFX_XMAC,
|
|
.init = qt202x_phy_init,
|
|
.reconfigure = qt202x_phy_reconfigure,
|
|
.poll = qt202x_phy_poll,
|
|
.fini = qt202x_phy_fini,
|
|
.get_settings = qt202x_phy_get_settings,
|
|
.set_settings = efx_mdio_set_settings,
|
|
.mmds = QT202X_REQUIRED_DEVS,
|
|
.loopbacks = QT202X_LOOPBACKS,
|
|
};
|