3c7c9370fb
The core.s_config op was meant for legacy drivers that needed to work with old pre-2.6.26 kernels. This is no longer relevant. Unfortunately, this op was incorrectly called from several drivers. Replace those occurences with proper i2c_board_info structs and call v4l2_i2c_new_subdev_board. After these changes v4l2_i2c_new_subdev_cfg() was no longer used, so remove that function as well. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
884 lines
22 KiB
C
884 lines
22 KiB
C
/*
|
|
* Driver for SiliconFile SR030PC30 VGA (1/10-Inch) Image Sensor with ISP
|
|
*
|
|
* Copyright (C) 2010 Samsung Electronics Co., Ltd
|
|
* Author: Sylwester Nawrocki, s.nawrocki@samsung.com
|
|
*
|
|
* Based on original driver authored by Dongsoo Nathaniel Kim
|
|
* and HeungJun Kim <riverful.kim@samsung.com>.
|
|
*
|
|
* Based on mt9v011 Micron Digital Image Sensor driver
|
|
* Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/slab.h>
|
|
#include <media/v4l2-device.h>
|
|
#include <media/v4l2-subdev.h>
|
|
#include <media/v4l2-mediabus.h>
|
|
#include <media/sr030pc30.h>
|
|
|
|
static int debug;
|
|
module_param(debug, int, 0644);
|
|
|
|
#define MODULE_NAME "SR030PC30"
|
|
|
|
/*
|
|
* Register offsets within a page
|
|
* b15..b8 - page id, b7..b0 - register address
|
|
*/
|
|
#define POWER_CTRL_REG 0x0001
|
|
#define PAGEMODE_REG 0x03
|
|
#define DEVICE_ID_REG 0x0004
|
|
#define NOON010PC30_ID 0x86
|
|
#define SR030PC30_ID 0x8C
|
|
#define VDO_CTL1_REG 0x0010
|
|
#define SUBSAMPL_NONE_VGA 0
|
|
#define SUBSAMPL_QVGA 0x10
|
|
#define SUBSAMPL_QQVGA 0x20
|
|
#define VDO_CTL2_REG 0x0011
|
|
#define SYNC_CTL_REG 0x0012
|
|
#define WIN_ROWH_REG 0x0020
|
|
#define WIN_ROWL_REG 0x0021
|
|
#define WIN_COLH_REG 0x0022
|
|
#define WIN_COLL_REG 0x0023
|
|
#define WIN_HEIGHTH_REG 0x0024
|
|
#define WIN_HEIGHTL_REG 0x0025
|
|
#define WIN_WIDTHH_REG 0x0026
|
|
#define WIN_WIDTHL_REG 0x0027
|
|
#define HBLANKH_REG 0x0040
|
|
#define HBLANKL_REG 0x0041
|
|
#define VSYNCH_REG 0x0042
|
|
#define VSYNCL_REG 0x0043
|
|
/* page 10 */
|
|
#define ISP_CTL_REG(n) (0x1010 + (n))
|
|
#define YOFS_REG 0x1040
|
|
#define DARK_YOFS_REG 0x1041
|
|
#define AG_ABRTH_REG 0x1050
|
|
#define SAT_CTL_REG 0x1060
|
|
#define BSAT_REG 0x1061
|
|
#define RSAT_REG 0x1062
|
|
#define AG_SAT_TH_REG 0x1063
|
|
/* page 11 */
|
|
#define ZLPF_CTRL_REG 0x1110
|
|
#define ZLPF_CTRL2_REG 0x1112
|
|
#define ZLPF_AGH_THR_REG 0x1121
|
|
#define ZLPF_THR_REG 0x1160
|
|
#define ZLPF_DYN_THR_REG 0x1160
|
|
/* page 12 */
|
|
#define YCLPF_CTL1_REG 0x1240
|
|
#define YCLPF_CTL2_REG 0x1241
|
|
#define YCLPF_THR_REG 0x1250
|
|
#define BLPF_CTL_REG 0x1270
|
|
#define BLPF_THR1_REG 0x1274
|
|
#define BLPF_THR2_REG 0x1275
|
|
/* page 14 - Lens Shading Compensation */
|
|
#define LENS_CTRL_REG 0x1410
|
|
#define LENS_XCEN_REG 0x1420
|
|
#define LENS_YCEN_REG 0x1421
|
|
#define LENS_R_COMP_REG 0x1422
|
|
#define LENS_G_COMP_REG 0x1423
|
|
#define LENS_B_COMP_REG 0x1424
|
|
/* page 15 - Color correction */
|
|
#define CMC_CTL_REG 0x1510
|
|
#define CMC_OFSGH_REG 0x1514
|
|
#define CMC_OFSGL_REG 0x1516
|
|
#define CMC_SIGN_REG 0x1517
|
|
/* Color correction coefficients */
|
|
#define CMC_COEF_REG(n) (0x1530 + (n))
|
|
/* Color correction offset coefficients */
|
|
#define CMC_OFS_REG(n) (0x1540 + (n))
|
|
/* page 16 - Gamma correction */
|
|
#define GMA_CTL_REG 0x1610
|
|
/* Gamma correction coefficients 0.14 */
|
|
#define GMA_COEF_REG(n) (0x1630 + (n))
|
|
/* page 20 - Auto Exposure */
|
|
#define AE_CTL1_REG 0x2010
|
|
#define AE_CTL2_REG 0x2011
|
|
#define AE_FRM_CTL_REG 0x2020
|
|
#define AE_FINE_CTL_REG(n) (0x2028 + (n))
|
|
#define EXP_TIMEH_REG 0x2083
|
|
#define EXP_TIMEM_REG 0x2084
|
|
#define EXP_TIMEL_REG 0x2085
|
|
#define EXP_MMINH_REG 0x2086
|
|
#define EXP_MMINL_REG 0x2087
|
|
#define EXP_MMAXH_REG 0x2088
|
|
#define EXP_MMAXM_REG 0x2089
|
|
#define EXP_MMAXL_REG 0x208A
|
|
/* page 22 - Auto White Balance */
|
|
#define AWB_CTL1_REG 0x2210
|
|
#define AWB_ENABLE 0x80
|
|
#define AWB_CTL2_REG 0x2211
|
|
#define MWB_ENABLE 0x01
|
|
/* RGB gain control (manual WB) when AWB_CTL1[7]=0 */
|
|
#define AWB_RGAIN_REG 0x2280
|
|
#define AWB_GGAIN_REG 0x2281
|
|
#define AWB_BGAIN_REG 0x2282
|
|
#define AWB_RMAX_REG 0x2283
|
|
#define AWB_RMIN_REG 0x2284
|
|
#define AWB_BMAX_REG 0x2285
|
|
#define AWB_BMIN_REG 0x2286
|
|
/* R, B gain range in bright light conditions */
|
|
#define AWB_RMAXB_REG 0x2287
|
|
#define AWB_RMINB_REG 0x2288
|
|
#define AWB_BMAXB_REG 0x2289
|
|
#define AWB_BMINB_REG 0x228A
|
|
/* manual white balance, when AWB_CTL2[0]=1 */
|
|
#define MWB_RGAIN_REG 0x22B2
|
|
#define MWB_BGAIN_REG 0x22B3
|
|
/* the token to mark an array end */
|
|
#define REG_TERM 0xFFFF
|
|
|
|
/* Minimum and maximum exposure time in ms */
|
|
#define EXPOS_MIN_MS 1
|
|
#define EXPOS_MAX_MS 125
|
|
|
|
struct sr030pc30_info {
|
|
struct v4l2_subdev sd;
|
|
const struct sr030pc30_platform_data *pdata;
|
|
const struct sr030pc30_format *curr_fmt;
|
|
const struct sr030pc30_frmsize *curr_win;
|
|
unsigned int auto_wb:1;
|
|
unsigned int auto_exp:1;
|
|
unsigned int hflip:1;
|
|
unsigned int vflip:1;
|
|
unsigned int sleep:1;
|
|
unsigned int exposure;
|
|
u8 blue_balance;
|
|
u8 red_balance;
|
|
u8 i2c_reg_page;
|
|
};
|
|
|
|
struct sr030pc30_format {
|
|
enum v4l2_mbus_pixelcode code;
|
|
enum v4l2_colorspace colorspace;
|
|
u16 ispctl1_reg;
|
|
};
|
|
|
|
struct sr030pc30_frmsize {
|
|
u16 width;
|
|
u16 height;
|
|
int vid_ctl1;
|
|
};
|
|
|
|
struct i2c_regval {
|
|
u16 addr;
|
|
u16 val;
|
|
};
|
|
|
|
static const struct v4l2_queryctrl sr030pc30_ctrl[] = {
|
|
{
|
|
.id = V4L2_CID_AUTO_WHITE_BALANCE,
|
|
.type = V4L2_CTRL_TYPE_BOOLEAN,
|
|
.name = "Auto White Balance",
|
|
.minimum = 0,
|
|
.maximum = 1,
|
|
.step = 1,
|
|
.default_value = 1,
|
|
}, {
|
|
.id = V4L2_CID_RED_BALANCE,
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
.name = "Red Balance",
|
|
.minimum = 0,
|
|
.maximum = 127,
|
|
.step = 1,
|
|
.default_value = 64,
|
|
.flags = 0,
|
|
}, {
|
|
.id = V4L2_CID_BLUE_BALANCE,
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
.name = "Blue Balance",
|
|
.minimum = 0,
|
|
.maximum = 127,
|
|
.step = 1,
|
|
.default_value = 64,
|
|
}, {
|
|
.id = V4L2_CID_EXPOSURE_AUTO,
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
.name = "Auto Exposure",
|
|
.minimum = 0,
|
|
.maximum = 1,
|
|
.step = 1,
|
|
.default_value = 1,
|
|
}, {
|
|
.id = V4L2_CID_EXPOSURE,
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
.name = "Exposure",
|
|
.minimum = EXPOS_MIN_MS,
|
|
.maximum = EXPOS_MAX_MS,
|
|
.step = 1,
|
|
.default_value = 1,
|
|
}, {
|
|
}
|
|
};
|
|
|
|
/* supported resolutions */
|
|
static const struct sr030pc30_frmsize sr030pc30_sizes[] = {
|
|
{
|
|
.width = 640,
|
|
.height = 480,
|
|
.vid_ctl1 = SUBSAMPL_NONE_VGA,
|
|
}, {
|
|
.width = 320,
|
|
.height = 240,
|
|
.vid_ctl1 = SUBSAMPL_QVGA,
|
|
}, {
|
|
.width = 160,
|
|
.height = 120,
|
|
.vid_ctl1 = SUBSAMPL_QQVGA,
|
|
},
|
|
};
|
|
|
|
/* supported pixel formats */
|
|
static const struct sr030pc30_format sr030pc30_formats[] = {
|
|
{
|
|
.code = V4L2_MBUS_FMT_YUYV8_2X8,
|
|
.colorspace = V4L2_COLORSPACE_JPEG,
|
|
.ispctl1_reg = 0x03,
|
|
}, {
|
|
.code = V4L2_MBUS_FMT_YVYU8_2X8,
|
|
.colorspace = V4L2_COLORSPACE_JPEG,
|
|
.ispctl1_reg = 0x02,
|
|
}, {
|
|
.code = V4L2_MBUS_FMT_VYUY8_2X8,
|
|
.colorspace = V4L2_COLORSPACE_JPEG,
|
|
.ispctl1_reg = 0,
|
|
}, {
|
|
.code = V4L2_MBUS_FMT_UYVY8_2X8,
|
|
.colorspace = V4L2_COLORSPACE_JPEG,
|
|
.ispctl1_reg = 0x01,
|
|
}, {
|
|
.code = V4L2_MBUS_FMT_RGB565_2X8_BE,
|
|
.colorspace = V4L2_COLORSPACE_JPEG,
|
|
.ispctl1_reg = 0x40,
|
|
},
|
|
};
|
|
|
|
static const struct i2c_regval sr030pc30_base_regs[] = {
|
|
/* Window size and position within pixel matrix */
|
|
{ WIN_ROWH_REG, 0x00 }, { WIN_ROWL_REG, 0x06 },
|
|
{ WIN_COLH_REG, 0x00 }, { WIN_COLL_REG, 0x06 },
|
|
{ WIN_HEIGHTH_REG, 0x01 }, { WIN_HEIGHTL_REG, 0xE0 },
|
|
{ WIN_WIDTHH_REG, 0x02 }, { WIN_WIDTHL_REG, 0x80 },
|
|
{ HBLANKH_REG, 0x01 }, { HBLANKL_REG, 0x50 },
|
|
{ VSYNCH_REG, 0x00 }, { VSYNCL_REG, 0x14 },
|
|
{ SYNC_CTL_REG, 0 },
|
|
/* Color corection and saturation */
|
|
{ ISP_CTL_REG(0), 0x30 }, { YOFS_REG, 0x80 },
|
|
{ DARK_YOFS_REG, 0x04 }, { AG_ABRTH_REG, 0x78 },
|
|
{ SAT_CTL_REG, 0x1F }, { BSAT_REG, 0x90 },
|
|
{ AG_SAT_TH_REG, 0xF0 }, { 0x1064, 0x80 },
|
|
{ CMC_CTL_REG, 0x03 }, { CMC_OFSGH_REG, 0x3C },
|
|
{ CMC_OFSGL_REG, 0x2C }, { CMC_SIGN_REG, 0x2F },
|
|
{ CMC_COEF_REG(0), 0xCB }, { CMC_OFS_REG(0), 0x87 },
|
|
{ CMC_COEF_REG(1), 0x61 }, { CMC_OFS_REG(1), 0x18 },
|
|
{ CMC_COEF_REG(2), 0x16 }, { CMC_OFS_REG(2), 0x91 },
|
|
{ CMC_COEF_REG(3), 0x23 }, { CMC_OFS_REG(3), 0x94 },
|
|
{ CMC_COEF_REG(4), 0xCE }, { CMC_OFS_REG(4), 0x9f },
|
|
{ CMC_COEF_REG(5), 0x2B }, { CMC_OFS_REG(5), 0x33 },
|
|
{ CMC_COEF_REG(6), 0x01 }, { CMC_OFS_REG(6), 0x00 },
|
|
{ CMC_COEF_REG(7), 0x34 }, { CMC_OFS_REG(7), 0x94 },
|
|
{ CMC_COEF_REG(8), 0x75 }, { CMC_OFS_REG(8), 0x14 },
|
|
/* Color corection coefficients */
|
|
{ GMA_CTL_REG, 0x03 }, { GMA_COEF_REG(0), 0x00 },
|
|
{ GMA_COEF_REG(1), 0x19 }, { GMA_COEF_REG(2), 0x26 },
|
|
{ GMA_COEF_REG(3), 0x3B }, { GMA_COEF_REG(4), 0x5D },
|
|
{ GMA_COEF_REG(5), 0x79 }, { GMA_COEF_REG(6), 0x8E },
|
|
{ GMA_COEF_REG(7), 0x9F }, { GMA_COEF_REG(8), 0xAF },
|
|
{ GMA_COEF_REG(9), 0xBD }, { GMA_COEF_REG(10), 0xCA },
|
|
{ GMA_COEF_REG(11), 0xDD }, { GMA_COEF_REG(12), 0xEC },
|
|
{ GMA_COEF_REG(13), 0xF7 }, { GMA_COEF_REG(14), 0xFF },
|
|
/* Noise reduction, Z-LPF, YC-LPF and BLPF filters setup */
|
|
{ ZLPF_CTRL_REG, 0x99 }, { ZLPF_CTRL2_REG, 0x0E },
|
|
{ ZLPF_AGH_THR_REG, 0x29 }, { ZLPF_THR_REG, 0x0F },
|
|
{ ZLPF_DYN_THR_REG, 0x63 }, { YCLPF_CTL1_REG, 0x23 },
|
|
{ YCLPF_CTL2_REG, 0x3B }, { YCLPF_THR_REG, 0x05 },
|
|
{ BLPF_CTL_REG, 0x1D }, { BLPF_THR1_REG, 0x05 },
|
|
{ BLPF_THR2_REG, 0x04 },
|
|
/* Automatic white balance */
|
|
{ AWB_CTL1_REG, 0xFB }, { AWB_CTL2_REG, 0x26 },
|
|
{ AWB_RMAX_REG, 0x54 }, { AWB_RMIN_REG, 0x2B },
|
|
{ AWB_BMAX_REG, 0x57 }, { AWB_BMIN_REG, 0x29 },
|
|
{ AWB_RMAXB_REG, 0x50 }, { AWB_RMINB_REG, 0x43 },
|
|
{ AWB_BMAXB_REG, 0x30 }, { AWB_BMINB_REG, 0x22 },
|
|
/* Auto exposure */
|
|
{ AE_CTL1_REG, 0x8C }, { AE_CTL2_REG, 0x04 },
|
|
{ AE_FRM_CTL_REG, 0x01 }, { AE_FINE_CTL_REG(0), 0x3F },
|
|
{ AE_FINE_CTL_REG(1), 0xA3 }, { AE_FINE_CTL_REG(3), 0x34 },
|
|
/* Lens shading compensation */
|
|
{ LENS_CTRL_REG, 0x01 }, { LENS_XCEN_REG, 0x80 },
|
|
{ LENS_YCEN_REG, 0x70 }, { LENS_R_COMP_REG, 0x53 },
|
|
{ LENS_G_COMP_REG, 0x40 }, { LENS_B_COMP_REG, 0x3e },
|
|
{ REG_TERM, 0 },
|
|
};
|
|
|
|
static inline struct sr030pc30_info *to_sr030pc30(struct v4l2_subdev *sd)
|
|
{
|
|
return container_of(sd, struct sr030pc30_info, sd);
|
|
}
|
|
|
|
static inline int set_i2c_page(struct sr030pc30_info *info,
|
|
struct i2c_client *client, unsigned int reg)
|
|
{
|
|
int ret = 0;
|
|
u32 page = reg >> 8 & 0xFF;
|
|
|
|
if (info->i2c_reg_page != page && (reg & 0xFF) != 0x03) {
|
|
ret = i2c_smbus_write_byte_data(client, PAGEMODE_REG, page);
|
|
if (!ret)
|
|
info->i2c_reg_page = page;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int cam_i2c_read(struct v4l2_subdev *sd, u32 reg_addr)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct sr030pc30_info *info = to_sr030pc30(sd);
|
|
|
|
int ret = set_i2c_page(info, client, reg_addr);
|
|
if (!ret)
|
|
ret = i2c_smbus_read_byte_data(client, reg_addr & 0xFF);
|
|
return ret;
|
|
}
|
|
|
|
static int cam_i2c_write(struct v4l2_subdev *sd, u32 reg_addr, u32 val)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct sr030pc30_info *info = to_sr030pc30(sd);
|
|
|
|
int ret = set_i2c_page(info, client, reg_addr);
|
|
if (!ret)
|
|
ret = i2c_smbus_write_byte_data(
|
|
client, reg_addr & 0xFF, val);
|
|
return ret;
|
|
}
|
|
|
|
static inline int sr030pc30_bulk_write_reg(struct v4l2_subdev *sd,
|
|
const struct i2c_regval *msg)
|
|
{
|
|
while (msg->addr != REG_TERM) {
|
|
int ret = cam_i2c_write(sd, msg->addr, msg->val);
|
|
if (ret)
|
|
return ret;
|
|
msg++;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* Device reset and sleep mode control */
|
|
static int sr030pc30_pwr_ctrl(struct v4l2_subdev *sd,
|
|
bool reset, bool sleep)
|
|
{
|
|
struct sr030pc30_info *info = to_sr030pc30(sd);
|
|
u8 reg = sleep ? 0xF1 : 0xF0;
|
|
int ret = 0;
|
|
|
|
if (reset)
|
|
ret = cam_i2c_write(sd, POWER_CTRL_REG, reg | 0x02);
|
|
if (!ret) {
|
|
ret = cam_i2c_write(sd, POWER_CTRL_REG, reg);
|
|
if (!ret) {
|
|
info->sleep = sleep;
|
|
if (reset)
|
|
info->i2c_reg_page = -1;
|
|
}
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static inline int sr030pc30_enable_autoexposure(struct v4l2_subdev *sd, int on)
|
|
{
|
|
struct sr030pc30_info *info = to_sr030pc30(sd);
|
|
/* auto anti-flicker is also enabled here */
|
|
int ret = cam_i2c_write(sd, AE_CTL1_REG, on ? 0xDC : 0x0C);
|
|
if (!ret)
|
|
info->auto_exp = on;
|
|
return ret;
|
|
}
|
|
|
|
static int sr030pc30_set_exposure(struct v4l2_subdev *sd, int value)
|
|
{
|
|
struct sr030pc30_info *info = to_sr030pc30(sd);
|
|
|
|
unsigned long expos = value * info->pdata->clk_rate / (8 * 1000);
|
|
|
|
int ret = cam_i2c_write(sd, EXP_TIMEH_REG, expos >> 16 & 0xFF);
|
|
if (!ret)
|
|
ret = cam_i2c_write(sd, EXP_TIMEM_REG, expos >> 8 & 0xFF);
|
|
if (!ret)
|
|
ret = cam_i2c_write(sd, EXP_TIMEL_REG, expos & 0xFF);
|
|
if (!ret) { /* Turn off AE */
|
|
info->exposure = value;
|
|
ret = sr030pc30_enable_autoexposure(sd, 0);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/* Automatic white balance control */
|
|
static int sr030pc30_enable_autowhitebalance(struct v4l2_subdev *sd, int on)
|
|
{
|
|
struct sr030pc30_info *info = to_sr030pc30(sd);
|
|
|
|
int ret = cam_i2c_write(sd, AWB_CTL2_REG, on ? 0x2E : 0x2F);
|
|
if (!ret)
|
|
ret = cam_i2c_write(sd, AWB_CTL1_REG, on ? 0xFB : 0x7B);
|
|
if (!ret)
|
|
info->auto_wb = on;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sr030pc30_set_flip(struct v4l2_subdev *sd)
|
|
{
|
|
struct sr030pc30_info *info = to_sr030pc30(sd);
|
|
|
|
s32 reg = cam_i2c_read(sd, VDO_CTL2_REG);
|
|
if (reg < 0)
|
|
return reg;
|
|
|
|
reg &= 0x7C;
|
|
if (info->hflip)
|
|
reg |= 0x01;
|
|
if (info->vflip)
|
|
reg |= 0x02;
|
|
return cam_i2c_write(sd, VDO_CTL2_REG, reg | 0x80);
|
|
}
|
|
|
|
/* Configure resolution, color format and image flip */
|
|
static int sr030pc30_set_params(struct v4l2_subdev *sd)
|
|
{
|
|
struct sr030pc30_info *info = to_sr030pc30(sd);
|
|
int ret;
|
|
|
|
if (!info->curr_win)
|
|
return -EINVAL;
|
|
|
|
/* Configure the resolution through subsampling */
|
|
ret = cam_i2c_write(sd, VDO_CTL1_REG,
|
|
info->curr_win->vid_ctl1);
|
|
|
|
if (!ret && info->curr_fmt)
|
|
ret = cam_i2c_write(sd, ISP_CTL_REG(0),
|
|
info->curr_fmt->ispctl1_reg);
|
|
if (!ret)
|
|
ret = sr030pc30_set_flip(sd);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Find nearest matching image pixel size. */
|
|
static int sr030pc30_try_frame_size(struct v4l2_mbus_framefmt *mf)
|
|
{
|
|
unsigned int min_err = ~0;
|
|
int i = ARRAY_SIZE(sr030pc30_sizes);
|
|
const struct sr030pc30_frmsize *fsize = &sr030pc30_sizes[0],
|
|
*match = NULL;
|
|
while (i--) {
|
|
int err = abs(fsize->width - mf->width)
|
|
+ abs(fsize->height - mf->height);
|
|
if (err < min_err) {
|
|
min_err = err;
|
|
match = fsize;
|
|
}
|
|
fsize++;
|
|
}
|
|
if (match) {
|
|
mf->width = match->width;
|
|
mf->height = match->height;
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int sr030pc30_queryctrl(struct v4l2_subdev *sd,
|
|
struct v4l2_queryctrl *qc)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(sr030pc30_ctrl); i++)
|
|
if (qc->id == sr030pc30_ctrl[i].id) {
|
|
*qc = sr030pc30_ctrl[i];
|
|
v4l2_dbg(1, debug, sd, "%s id: %d\n",
|
|
__func__, qc->id);
|
|
return 0;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static inline int sr030pc30_set_bluebalance(struct v4l2_subdev *sd, int value)
|
|
{
|
|
int ret = cam_i2c_write(sd, MWB_BGAIN_REG, value);
|
|
if (!ret)
|
|
to_sr030pc30(sd)->blue_balance = value;
|
|
return ret;
|
|
}
|
|
|
|
static inline int sr030pc30_set_redbalance(struct v4l2_subdev *sd, int value)
|
|
{
|
|
int ret = cam_i2c_write(sd, MWB_RGAIN_REG, value);
|
|
if (!ret)
|
|
to_sr030pc30(sd)->red_balance = value;
|
|
return ret;
|
|
}
|
|
|
|
static int sr030pc30_s_ctrl(struct v4l2_subdev *sd,
|
|
struct v4l2_control *ctrl)
|
|
{
|
|
int i, ret = 0;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(sr030pc30_ctrl); i++)
|
|
if (ctrl->id == sr030pc30_ctrl[i].id)
|
|
break;
|
|
|
|
if (i == ARRAY_SIZE(sr030pc30_ctrl))
|
|
return -EINVAL;
|
|
|
|
if (ctrl->value < sr030pc30_ctrl[i].minimum ||
|
|
ctrl->value > sr030pc30_ctrl[i].maximum)
|
|
return -ERANGE;
|
|
|
|
v4l2_dbg(1, debug, sd, "%s: ctrl_id: %d, value: %d\n",
|
|
__func__, ctrl->id, ctrl->value);
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_AUTO_WHITE_BALANCE:
|
|
sr030pc30_enable_autowhitebalance(sd, ctrl->value);
|
|
break;
|
|
case V4L2_CID_BLUE_BALANCE:
|
|
ret = sr030pc30_set_bluebalance(sd, ctrl->value);
|
|
break;
|
|
case V4L2_CID_RED_BALANCE:
|
|
ret = sr030pc30_set_redbalance(sd, ctrl->value);
|
|
break;
|
|
case V4L2_CID_EXPOSURE_AUTO:
|
|
sr030pc30_enable_autoexposure(sd,
|
|
ctrl->value == V4L2_EXPOSURE_AUTO);
|
|
break;
|
|
case V4L2_CID_EXPOSURE:
|
|
ret = sr030pc30_set_exposure(sd, ctrl->value);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sr030pc30_g_ctrl(struct v4l2_subdev *sd,
|
|
struct v4l2_control *ctrl)
|
|
{
|
|
struct sr030pc30_info *info = to_sr030pc30(sd);
|
|
|
|
v4l2_dbg(1, debug, sd, "%s: id: %d\n", __func__, ctrl->id);
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_AUTO_WHITE_BALANCE:
|
|
ctrl->value = info->auto_wb;
|
|
break;
|
|
case V4L2_CID_BLUE_BALANCE:
|
|
ctrl->value = info->blue_balance;
|
|
break;
|
|
case V4L2_CID_RED_BALANCE:
|
|
ctrl->value = info->red_balance;
|
|
break;
|
|
case V4L2_CID_EXPOSURE_AUTO:
|
|
ctrl->value = info->auto_exp;
|
|
break;
|
|
case V4L2_CID_EXPOSURE:
|
|
ctrl->value = info->exposure;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int sr030pc30_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
|
|
enum v4l2_mbus_pixelcode *code)
|
|
{
|
|
if (!code || index >= ARRAY_SIZE(sr030pc30_formats))
|
|
return -EINVAL;
|
|
|
|
*code = sr030pc30_formats[index].code;
|
|
return 0;
|
|
}
|
|
|
|
static int sr030pc30_g_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_mbus_framefmt *mf)
|
|
{
|
|
struct sr030pc30_info *info = to_sr030pc30(sd);
|
|
int ret;
|
|
|
|
if (!mf)
|
|
return -EINVAL;
|
|
|
|
if (!info->curr_win || !info->curr_fmt) {
|
|
ret = sr030pc30_set_params(sd);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
mf->width = info->curr_win->width;
|
|
mf->height = info->curr_win->height;
|
|
mf->code = info->curr_fmt->code;
|
|
mf->colorspace = info->curr_fmt->colorspace;
|
|
mf->field = V4L2_FIELD_NONE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Return nearest media bus frame format. */
|
|
static const struct sr030pc30_format *try_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_mbus_framefmt *mf)
|
|
{
|
|
int i = ARRAY_SIZE(sr030pc30_formats);
|
|
|
|
sr030pc30_try_frame_size(mf);
|
|
|
|
while (i--)
|
|
if (mf->code == sr030pc30_formats[i].code)
|
|
break;
|
|
|
|
mf->code = sr030pc30_formats[i].code;
|
|
|
|
return &sr030pc30_formats[i];
|
|
}
|
|
|
|
/* Return nearest media bus frame format. */
|
|
static int sr030pc30_try_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_mbus_framefmt *mf)
|
|
{
|
|
if (!sd || !mf)
|
|
return -EINVAL;
|
|
|
|
try_fmt(sd, mf);
|
|
return 0;
|
|
}
|
|
|
|
static int sr030pc30_s_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_mbus_framefmt *mf)
|
|
{
|
|
struct sr030pc30_info *info = to_sr030pc30(sd);
|
|
|
|
if (!sd || !mf)
|
|
return -EINVAL;
|
|
|
|
info->curr_fmt = try_fmt(sd, mf);
|
|
|
|
return sr030pc30_set_params(sd);
|
|
}
|
|
|
|
static int sr030pc30_base_config(struct v4l2_subdev *sd)
|
|
{
|
|
struct sr030pc30_info *info = to_sr030pc30(sd);
|
|
int ret;
|
|
unsigned long expmin, expmax;
|
|
|
|
ret = sr030pc30_bulk_write_reg(sd, sr030pc30_base_regs);
|
|
if (!ret) {
|
|
info->curr_fmt = &sr030pc30_formats[0];
|
|
info->curr_win = &sr030pc30_sizes[0];
|
|
ret = sr030pc30_set_params(sd);
|
|
}
|
|
if (!ret)
|
|
ret = sr030pc30_pwr_ctrl(sd, false, false);
|
|
|
|
if (!ret && !info->pdata)
|
|
return ret;
|
|
|
|
expmin = EXPOS_MIN_MS * info->pdata->clk_rate / (8 * 1000);
|
|
expmax = EXPOS_MAX_MS * info->pdata->clk_rate / (8 * 1000);
|
|
|
|
v4l2_dbg(1, debug, sd, "%s: expmin= %lx, expmax= %lx", __func__,
|
|
expmin, expmax);
|
|
|
|
/* Setting up manual exposure time range */
|
|
ret = cam_i2c_write(sd, EXP_MMINH_REG, expmin >> 8 & 0xFF);
|
|
if (!ret)
|
|
ret = cam_i2c_write(sd, EXP_MMINL_REG, expmin & 0xFF);
|
|
if (!ret)
|
|
ret = cam_i2c_write(sd, EXP_MMAXH_REG, expmax >> 16 & 0xFF);
|
|
if (!ret)
|
|
ret = cam_i2c_write(sd, EXP_MMAXM_REG, expmax >> 8 & 0xFF);
|
|
if (!ret)
|
|
ret = cam_i2c_write(sd, EXP_MMAXL_REG, expmax & 0xFF);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sr030pc30_s_stream(struct v4l2_subdev *sd, int enable)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int sr030pc30_s_power(struct v4l2_subdev *sd, int on)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct sr030pc30_info *info = to_sr030pc30(sd);
|
|
const struct sr030pc30_platform_data *pdata = info->pdata;
|
|
int ret;
|
|
|
|
if (WARN(pdata == NULL, "No platform data!\n"))
|
|
return -ENOMEM;
|
|
|
|
/*
|
|
* Put sensor into power sleep mode before switching off
|
|
* power and disabling MCLK.
|
|
*/
|
|
if (!on)
|
|
sr030pc30_pwr_ctrl(sd, false, true);
|
|
|
|
/* set_power controls sensor's power and clock */
|
|
if (pdata->set_power) {
|
|
ret = pdata->set_power(&client->dev, on);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
if (on) {
|
|
ret = sr030pc30_base_config(sd);
|
|
} else {
|
|
info->curr_win = NULL;
|
|
info->curr_fmt = NULL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct v4l2_subdev_core_ops sr030pc30_core_ops = {
|
|
.s_power = sr030pc30_s_power,
|
|
.queryctrl = sr030pc30_queryctrl,
|
|
.s_ctrl = sr030pc30_s_ctrl,
|
|
.g_ctrl = sr030pc30_g_ctrl,
|
|
};
|
|
|
|
static const struct v4l2_subdev_video_ops sr030pc30_video_ops = {
|
|
.s_stream = sr030pc30_s_stream,
|
|
.g_mbus_fmt = sr030pc30_g_fmt,
|
|
.s_mbus_fmt = sr030pc30_s_fmt,
|
|
.try_mbus_fmt = sr030pc30_try_fmt,
|
|
.enum_mbus_fmt = sr030pc30_enum_fmt,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops sr030pc30_ops = {
|
|
.core = &sr030pc30_core_ops,
|
|
.video = &sr030pc30_video_ops,
|
|
};
|
|
|
|
/*
|
|
* Detect sensor type. Return 0 if SR030PC30 was detected
|
|
* or -ENODEV otherwise.
|
|
*/
|
|
static int sr030pc30_detect(struct i2c_client *client)
|
|
{
|
|
const struct sr030pc30_platform_data *pdata
|
|
= client->dev.platform_data;
|
|
int ret;
|
|
|
|
/* Enable sensor's power and clock */
|
|
if (pdata->set_power) {
|
|
ret = pdata->set_power(&client->dev, 1);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ret = i2c_smbus_read_byte_data(client, DEVICE_ID_REG);
|
|
|
|
if (pdata->set_power)
|
|
pdata->set_power(&client->dev, 0);
|
|
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "%s: I2C read failed\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
return ret == SR030PC30_ID ? 0 : -ENODEV;
|
|
}
|
|
|
|
|
|
static int sr030pc30_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct sr030pc30_info *info;
|
|
struct v4l2_subdev *sd;
|
|
const struct sr030pc30_platform_data *pdata
|
|
= client->dev.platform_data;
|
|
int ret;
|
|
|
|
if (!pdata) {
|
|
dev_err(&client->dev, "No platform data!");
|
|
return -EIO;
|
|
}
|
|
|
|
ret = sr030pc30_detect(client);
|
|
if (ret)
|
|
return ret;
|
|
|
|
info = kzalloc(sizeof(*info), GFP_KERNEL);
|
|
if (!info)
|
|
return -ENOMEM;
|
|
|
|
sd = &info->sd;
|
|
strcpy(sd->name, MODULE_NAME);
|
|
info->pdata = client->dev.platform_data;
|
|
|
|
v4l2_i2c_subdev_init(sd, client, &sr030pc30_ops);
|
|
|
|
info->i2c_reg_page = -1;
|
|
info->hflip = 1;
|
|
info->auto_exp = 1;
|
|
info->exposure = 30;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sr030pc30_remove(struct i2c_client *client)
|
|
{
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct sr030pc30_info *info = to_sr030pc30(sd);
|
|
|
|
v4l2_device_unregister_subdev(sd);
|
|
kfree(info);
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id sr030pc30_id[] = {
|
|
{ MODULE_NAME, 0 },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, sr030pc30_id);
|
|
|
|
|
|
static struct i2c_driver sr030pc30_i2c_driver = {
|
|
.driver = {
|
|
.name = MODULE_NAME
|
|
},
|
|
.probe = sr030pc30_probe,
|
|
.remove = sr030pc30_remove,
|
|
.id_table = sr030pc30_id,
|
|
};
|
|
|
|
static int __init sr030pc30_init(void)
|
|
{
|
|
return i2c_add_driver(&sr030pc30_i2c_driver);
|
|
}
|
|
|
|
static void __exit sr030pc30_exit(void)
|
|
{
|
|
i2c_del_driver(&sr030pc30_i2c_driver);
|
|
}
|
|
|
|
module_init(sr030pc30_init);
|
|
module_exit(sr030pc30_exit);
|
|
|
|
MODULE_DESCRIPTION("Siliconfile SR030PC30 camera driver");
|
|
MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>");
|
|
MODULE_LICENSE("GPL");
|