linux/drivers/thermal/thermal_sys.c
Linus Torvalds 4b24ff7110 The tag contains just a few battery-related changes for v3.6. It's is
all pretty straightforward, except one thing.
 
 One of our patches added thermal support for power supply class, but
 thermal/ subsystem changed under our feet. We (well, Stephen, that is)
 caught the issue and it was decided[1] that I'd just delay the battery
 pull request, and then will fix it up by merging upstream back into
 battery tree at the specific commit.
 
 That's not all though: another[2] small fixup for thermal subsystem was
 needed to get rid of a warning in power supply subsystem (the warning
 was not drivers/power's "fault", the thermal registration function just
 needed a proper const annotation, which is also done by a small commit
 on top of the merge.
 
 So, to sum this up:
 - The 'master' branch of the battery tree was in the -next tree for
   weeks, was never rebased, altered etc. It should be all OK;
 - Although, for-v3.6 tag contains the 'master' branch + merge + the
   warning fix.
 
 [1] http://lkml.org/lkml/2012/6/19/23
 [2] http://lkml.org/lkml/2012/6/18/28
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQIcBAABAgAGBQJQF9V8AAoJEGgI9fZJve1bLvkP/j/Nt1fBud2w5Q/NJr310hYJ
 NWIMSJwFbMhPoNd7sESznogXH8eHQ6YJP+CmkA5Gxr0t8pjEEJHEEyEcf1eNv6/c
 YDZfDB3TIaeYzulvRUkXMQ1f7hiA5Bq2t13yXeMM19+r9DzNZ51jZ3TXETLkpWZG
 BfZPg5wmP0xssXB3fjJMWuW5hVEc503WLpLFXkWfWKMU3PGdy/8DckV/YLvf2l7K
 1fkBLZry0gtruKqFbwcXhanP1JQ8FFFO8n1tSVLJhXXoym5twn/5GAgcpcKSFfJg
 mkGXAQLLuXKfERBIda7qbQl74HmTzYadCcueeXy1hTpom+VwfOpG+by2t/FrXT/M
 aJW6hfSLMgicG8FIuSYqbkutvijU9srU/YI00zrSGDBgi4sGKChRMf4sKQXnHO7X
 Lb7csQ7hEWsfG5gkgjRkmgZdhqWYoIxxe5Gv2Z9MKF27mHoSM03KHiZGlDJMrmNs
 w4KcU5H9tA62dT/UFszuu7NZenmsVS/ktiHWe5k+EXElZMZRrxKDJk2cvLPkRz/E
 VkXGvAmTDYPasZm29yzTnPKcuo6pfeOVJnUWybHOYxhkqAhJu1QzHCatqapgfy8E
 F2ODI5FoWtQES96B9t3tY4lTzq/0yUHcbiJt4BsyRcCGP+ggEQjCq0HGqOca12XX
 gxE20O3l+YQTCQIYKH+S
 =1NaS
 -----END PGP SIGNATURE-----

Merge tag 'for-v3.6' of git://git.infradead.org/battery-2.6

Pull battery updates from Anton Vorontsov:
 "The tag contains just a few battery-related changes for v3.6.  It's is
  all pretty straightforward, except one thing.

  One of our patches added thermal support for power supply class, but
  thermal/ subsystem changed under our feet.  We (well, Stephen, that
  is) caught the issue and it was decided[1] that I'd just delay the
  battery pull request, and then will fix it up by merging upstream back
  into battery tree at the specific commit.

  That's not all though: another[2] small fixup for thermal subsystem
  was needed to get rid of a warning in power supply subsystem (the
  warning was not drivers/power's "fault", the thermal registration
  function just needed a proper const annotation, which is also done by
  a small commit on top of the merge.

  So, to sum this up:
   - The 'master' branch of the battery tree was in the -next tree for
     weeks, was never rebased, altered etc.  It should be all OK;
   - Although, for-v3.6 tag contains the 'master' branch + merge + the
     warning fix.

  [1] http://lkml.org/lkml/2012/6/19/23
  [2] http://lkml.org/lkml/2012/6/18/28"

* tag 'for-v3.6' of git://git.infradead.org/battery-2.6: (23 commits)
  thermal: Constify 'type' argument for the registration routine
  olpc-battery: update CHARGE_FULL_DESIGN property for BYD LiFe batteries
  olpc-battery: Add VOLTAGE_MAX_DESIGN property
  charger-manager: Fix build break related to EXTCON
  lp8727_charger: Move header file into platform_data directory
  power_supply: Add min/max alert properties for CAPACITY, TEMP, TEMP_AMBIENT
  bq27x00_battery: Add support for BQ27425 chip
  charger-manager: Set current limit of regulator for over current protection
  charger-manager: Use EXTCON Subsystem to detect charger cables for charging
  test_power: Add VOLTAGE_NOW and BATTERY_TEMP properties
  test_power: Add support for USB AC source
  gpio-charger: Use cansleep version of gpio_set_value
  bq27x00_battery: Add support for power average and health properties
  sbs-battery: Don't trigger false supply_changed event
  twl4030_charger: Allow charger to control the regulator that feeds it
  twl4030_charger: Add backup-battery charging
  twl4030_charger: Fix some typos
  max17042_battery: Support CHARGE_COUNTER power supply attribute
  smb347-charger: Add constant charge and current properties
  power_supply: Add constant charge_current and charge_voltage properties
  ...
2012-07-31 18:08:25 -07:00

1537 lines
38 KiB
C

/*
* thermal.c - Generic Thermal Management Sysfs support.
*
* Copyright (C) 2008 Intel Corp
* Copyright (C) 2008 Zhang Rui <rui.zhang@intel.com>
* Copyright (C) 2008 Sujith Thomas <sujith.thomas@intel.com>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/kdev_t.h>
#include <linux/idr.h>
#include <linux/thermal.h>
#include <linux/spinlock.h>
#include <linux/reboot.h>
#include <net/netlink.h>
#include <net/genetlink.h>
MODULE_AUTHOR("Zhang Rui");
MODULE_DESCRIPTION("Generic thermal management sysfs support");
MODULE_LICENSE("GPL");
struct thermal_cooling_device_instance {
int id;
char name[THERMAL_NAME_LENGTH];
struct thermal_zone_device *tz;
struct thermal_cooling_device *cdev;
int trip;
char attr_name[THERMAL_NAME_LENGTH];
struct device_attribute attr;
struct list_head node;
};
static DEFINE_IDR(thermal_tz_idr);
static DEFINE_IDR(thermal_cdev_idr);
static DEFINE_MUTEX(thermal_idr_lock);
static LIST_HEAD(thermal_tz_list);
static LIST_HEAD(thermal_cdev_list);
static DEFINE_MUTEX(thermal_list_lock);
static int get_idr(struct idr *idr, struct mutex *lock, int *id)
{
int err;
again:
if (unlikely(idr_pre_get(idr, GFP_KERNEL) == 0))
return -ENOMEM;
if (lock)
mutex_lock(lock);
err = idr_get_new(idr, NULL, id);
if (lock)
mutex_unlock(lock);
if (unlikely(err == -EAGAIN))
goto again;
else if (unlikely(err))
return err;
*id = *id & MAX_ID_MASK;
return 0;
}
static void release_idr(struct idr *idr, struct mutex *lock, int id)
{
if (lock)
mutex_lock(lock);
idr_remove(idr, id);
if (lock)
mutex_unlock(lock);
}
/* sys I/F for thermal zone */
#define to_thermal_zone(_dev) \
container_of(_dev, struct thermal_zone_device, device)
static ssize_t
type_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
return sprintf(buf, "%s\n", tz->type);
}
static ssize_t
temp_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
long temperature;
int ret;
if (!tz->ops->get_temp)
return -EPERM;
ret = tz->ops->get_temp(tz, &temperature);
if (ret)
return ret;
return sprintf(buf, "%ld\n", temperature);
}
static ssize_t
mode_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
enum thermal_device_mode mode;
int result;
if (!tz->ops->get_mode)
return -EPERM;
result = tz->ops->get_mode(tz, &mode);
if (result)
return result;
return sprintf(buf, "%s\n", mode == THERMAL_DEVICE_ENABLED ? "enabled"
: "disabled");
}
static ssize_t
mode_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
int result;
if (!tz->ops->set_mode)
return -EPERM;
if (!strncmp(buf, "enabled", sizeof("enabled") - 1))
result = tz->ops->set_mode(tz, THERMAL_DEVICE_ENABLED);
else if (!strncmp(buf, "disabled", sizeof("disabled") - 1))
result = tz->ops->set_mode(tz, THERMAL_DEVICE_DISABLED);
else
result = -EINVAL;
if (result)
return result;
return count;
}
static ssize_t
trip_point_type_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
enum thermal_trip_type type;
int trip, result;
if (!tz->ops->get_trip_type)
return -EPERM;
if (!sscanf(attr->attr.name, "trip_point_%d_type", &trip))
return -EINVAL;
result = tz->ops->get_trip_type(tz, trip, &type);
if (result)
return result;
switch (type) {
case THERMAL_TRIP_CRITICAL:
return sprintf(buf, "critical\n");
case THERMAL_TRIP_HOT:
return sprintf(buf, "hot\n");
case THERMAL_TRIP_PASSIVE:
return sprintf(buf, "passive\n");
case THERMAL_TRIP_ACTIVE:
return sprintf(buf, "active\n");
default:
return sprintf(buf, "unknown\n");
}
}
static ssize_t
trip_point_temp_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
int trip, ret;
unsigned long temperature;
if (!tz->ops->set_trip_temp)
return -EPERM;
if (!sscanf(attr->attr.name, "trip_point_%d_temp", &trip))
return -EINVAL;
if (kstrtoul(buf, 10, &temperature))
return -EINVAL;
ret = tz->ops->set_trip_temp(tz, trip, temperature);
return ret ? ret : count;
}
static ssize_t
trip_point_temp_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
int trip, ret;
long temperature;
if (!tz->ops->get_trip_temp)
return -EPERM;
if (!sscanf(attr->attr.name, "trip_point_%d_temp", &trip))
return -EINVAL;
ret = tz->ops->get_trip_temp(tz, trip, &temperature);
if (ret)
return ret;
return sprintf(buf, "%ld\n", temperature);
}
static ssize_t
trip_point_hyst_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
int trip, ret;
unsigned long temperature;
if (!tz->ops->set_trip_hyst)
return -EPERM;
if (!sscanf(attr->attr.name, "trip_point_%d_hyst", &trip))
return -EINVAL;
if (kstrtoul(buf, 10, &temperature))
return -EINVAL;
/*
* We are not doing any check on the 'temperature' value
* here. The driver implementing 'set_trip_hyst' has to
* take care of this.
*/
ret = tz->ops->set_trip_hyst(tz, trip, temperature);
return ret ? ret : count;
}
static ssize_t
trip_point_hyst_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
int trip, ret;
unsigned long temperature;
if (!tz->ops->get_trip_hyst)
return -EPERM;
if (!sscanf(attr->attr.name, "trip_point_%d_hyst", &trip))
return -EINVAL;
ret = tz->ops->get_trip_hyst(tz, trip, &temperature);
return ret ? ret : sprintf(buf, "%ld\n", temperature);
}
static ssize_t
passive_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
struct thermal_cooling_device *cdev = NULL;
int state;
if (!sscanf(buf, "%d\n", &state))
return -EINVAL;
/* sanity check: values below 1000 millicelcius don't make sense
* and can cause the system to go into a thermal heart attack
*/
if (state && state < 1000)
return -EINVAL;
if (state && !tz->forced_passive) {
mutex_lock(&thermal_list_lock);
list_for_each_entry(cdev, &thermal_cdev_list, node) {
if (!strncmp("Processor", cdev->type,
sizeof("Processor")))
thermal_zone_bind_cooling_device(tz,
THERMAL_TRIPS_NONE,
cdev);
}
mutex_unlock(&thermal_list_lock);
if (!tz->passive_delay)
tz->passive_delay = 1000;
} else if (!state && tz->forced_passive) {
mutex_lock(&thermal_list_lock);
list_for_each_entry(cdev, &thermal_cdev_list, node) {
if (!strncmp("Processor", cdev->type,
sizeof("Processor")))
thermal_zone_unbind_cooling_device(tz,
THERMAL_TRIPS_NONE,
cdev);
}
mutex_unlock(&thermal_list_lock);
tz->passive_delay = 0;
}
tz->tc1 = 1;
tz->tc2 = 1;
tz->forced_passive = state;
thermal_zone_device_update(tz);
return count;
}
static ssize_t
passive_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
return sprintf(buf, "%d\n", tz->forced_passive);
}
static DEVICE_ATTR(type, 0444, type_show, NULL);
static DEVICE_ATTR(temp, 0444, temp_show, NULL);
static DEVICE_ATTR(mode, 0644, mode_show, mode_store);
static DEVICE_ATTR(passive, S_IRUGO | S_IWUSR, passive_show, passive_store);
/* sys I/F for cooling device */
#define to_cooling_device(_dev) \
container_of(_dev, struct thermal_cooling_device, device)
static ssize_t
thermal_cooling_device_type_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct thermal_cooling_device *cdev = to_cooling_device(dev);
return sprintf(buf, "%s\n", cdev->type);
}
static ssize_t
thermal_cooling_device_max_state_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct thermal_cooling_device *cdev = to_cooling_device(dev);
unsigned long state;
int ret;
ret = cdev->ops->get_max_state(cdev, &state);
if (ret)
return ret;
return sprintf(buf, "%ld\n", state);
}
static ssize_t
thermal_cooling_device_cur_state_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct thermal_cooling_device *cdev = to_cooling_device(dev);
unsigned long state;
int ret;
ret = cdev->ops->get_cur_state(cdev, &state);
if (ret)
return ret;
return sprintf(buf, "%ld\n", state);
}
static ssize_t
thermal_cooling_device_cur_state_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_cooling_device *cdev = to_cooling_device(dev);
unsigned long state;
int result;
if (!sscanf(buf, "%ld\n", &state))
return -EINVAL;
if ((long)state < 0)
return -EINVAL;
result = cdev->ops->set_cur_state(cdev, state);
if (result)
return result;
return count;
}
static struct device_attribute dev_attr_cdev_type =
__ATTR(type, 0444, thermal_cooling_device_type_show, NULL);
static DEVICE_ATTR(max_state, 0444,
thermal_cooling_device_max_state_show, NULL);
static DEVICE_ATTR(cur_state, 0644,
thermal_cooling_device_cur_state_show,
thermal_cooling_device_cur_state_store);
static ssize_t
thermal_cooling_device_trip_point_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct thermal_cooling_device_instance *instance;
instance =
container_of(attr, struct thermal_cooling_device_instance, attr);
if (instance->trip == THERMAL_TRIPS_NONE)
return sprintf(buf, "-1\n");
else
return sprintf(buf, "%d\n", instance->trip);
}
/* Device management */
#if defined(CONFIG_THERMAL_HWMON)
/* hwmon sys I/F */
#include <linux/hwmon.h>
/* thermal zone devices with the same type share one hwmon device */
struct thermal_hwmon_device {
char type[THERMAL_NAME_LENGTH];
struct device *device;
int count;
struct list_head tz_list;
struct list_head node;
};
struct thermal_hwmon_attr {
struct device_attribute attr;
char name[16];
};
/* one temperature input for each thermal zone */
struct thermal_hwmon_temp {
struct list_head hwmon_node;
struct thermal_zone_device *tz;
struct thermal_hwmon_attr temp_input; /* hwmon sys attr */
struct thermal_hwmon_attr temp_crit; /* hwmon sys attr */
};
static LIST_HEAD(thermal_hwmon_list);
static ssize_t
name_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct thermal_hwmon_device *hwmon = dev_get_drvdata(dev);
return sprintf(buf, "%s\n", hwmon->type);
}
static DEVICE_ATTR(name, 0444, name_show, NULL);
static ssize_t
temp_input_show(struct device *dev, struct device_attribute *attr, char *buf)
{
long temperature;
int ret;
struct thermal_hwmon_attr *hwmon_attr
= container_of(attr, struct thermal_hwmon_attr, attr);
struct thermal_hwmon_temp *temp
= container_of(hwmon_attr, struct thermal_hwmon_temp,
temp_input);
struct thermal_zone_device *tz = temp->tz;
ret = tz->ops->get_temp(tz, &temperature);
if (ret)
return ret;
return sprintf(buf, "%ld\n", temperature);
}
static ssize_t
temp_crit_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct thermal_hwmon_attr *hwmon_attr
= container_of(attr, struct thermal_hwmon_attr, attr);
struct thermal_hwmon_temp *temp
= container_of(hwmon_attr, struct thermal_hwmon_temp,
temp_crit);
struct thermal_zone_device *tz = temp->tz;
long temperature;
int ret;
ret = tz->ops->get_trip_temp(tz, 0, &temperature);
if (ret)
return ret;
return sprintf(buf, "%ld\n", temperature);
}
static struct thermal_hwmon_device *
thermal_hwmon_lookup_by_type(const struct thermal_zone_device *tz)
{
struct thermal_hwmon_device *hwmon;
mutex_lock(&thermal_list_lock);
list_for_each_entry(hwmon, &thermal_hwmon_list, node)
if (!strcmp(hwmon->type, tz->type)) {
mutex_unlock(&thermal_list_lock);
return hwmon;
}
mutex_unlock(&thermal_list_lock);
return NULL;
}
/* Find the temperature input matching a given thermal zone */
static struct thermal_hwmon_temp *
thermal_hwmon_lookup_temp(const struct thermal_hwmon_device *hwmon,
const struct thermal_zone_device *tz)
{
struct thermal_hwmon_temp *temp;
mutex_lock(&thermal_list_lock);
list_for_each_entry(temp, &hwmon->tz_list, hwmon_node)
if (temp->tz == tz) {
mutex_unlock(&thermal_list_lock);
return temp;
}
mutex_unlock(&thermal_list_lock);
return NULL;
}
static int
thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
{
struct thermal_hwmon_device *hwmon;
struct thermal_hwmon_temp *temp;
int new_hwmon_device = 1;
int result;
hwmon = thermal_hwmon_lookup_by_type(tz);
if (hwmon) {
new_hwmon_device = 0;
goto register_sys_interface;
}
hwmon = kzalloc(sizeof(struct thermal_hwmon_device), GFP_KERNEL);
if (!hwmon)
return -ENOMEM;
INIT_LIST_HEAD(&hwmon->tz_list);
strlcpy(hwmon->type, tz->type, THERMAL_NAME_LENGTH);
hwmon->device = hwmon_device_register(NULL);
if (IS_ERR(hwmon->device)) {
result = PTR_ERR(hwmon->device);
goto free_mem;
}
dev_set_drvdata(hwmon->device, hwmon);
result = device_create_file(hwmon->device, &dev_attr_name);
if (result)
goto free_mem;
register_sys_interface:
temp = kzalloc(sizeof(struct thermal_hwmon_temp), GFP_KERNEL);
if (!temp) {
result = -ENOMEM;
goto unregister_name;
}
temp->tz = tz;
hwmon->count++;
snprintf(temp->temp_input.name, THERMAL_NAME_LENGTH,
"temp%d_input", hwmon->count);
temp->temp_input.attr.attr.name = temp->temp_input.name;
temp->temp_input.attr.attr.mode = 0444;
temp->temp_input.attr.show = temp_input_show;
sysfs_attr_init(&temp->temp_input.attr.attr);
result = device_create_file(hwmon->device, &temp->temp_input.attr);
if (result)
goto free_temp_mem;
if (tz->ops->get_crit_temp) {
unsigned long temperature;
if (!tz->ops->get_crit_temp(tz, &temperature)) {
snprintf(temp->temp_crit.name, THERMAL_NAME_LENGTH,
"temp%d_crit", hwmon->count);
temp->temp_crit.attr.attr.name = temp->temp_crit.name;
temp->temp_crit.attr.attr.mode = 0444;
temp->temp_crit.attr.show = temp_crit_show;
sysfs_attr_init(&temp->temp_crit.attr.attr);
result = device_create_file(hwmon->device,
&temp->temp_crit.attr);
if (result)
goto unregister_input;
}
}
mutex_lock(&thermal_list_lock);
if (new_hwmon_device)
list_add_tail(&hwmon->node, &thermal_hwmon_list);
list_add_tail(&temp->hwmon_node, &hwmon->tz_list);
mutex_unlock(&thermal_list_lock);
return 0;
unregister_input:
device_remove_file(hwmon->device, &temp->temp_input.attr);
free_temp_mem:
kfree(temp);
unregister_name:
if (new_hwmon_device) {
device_remove_file(hwmon->device, &dev_attr_name);
hwmon_device_unregister(hwmon->device);
}
free_mem:
if (new_hwmon_device)
kfree(hwmon);
return result;
}
static void
thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz)
{
struct thermal_hwmon_device *hwmon;
struct thermal_hwmon_temp *temp;
hwmon = thermal_hwmon_lookup_by_type(tz);
if (unlikely(!hwmon)) {
/* Should never happen... */
dev_dbg(&tz->device, "hwmon device lookup failed!\n");
return;
}
temp = thermal_hwmon_lookup_temp(hwmon, tz);
if (unlikely(!temp)) {
/* Should never happen... */
dev_dbg(&tz->device, "temperature input lookup failed!\n");
return;
}
device_remove_file(hwmon->device, &temp->temp_input.attr);
if (tz->ops->get_crit_temp)
device_remove_file(hwmon->device, &temp->temp_crit.attr);
mutex_lock(&thermal_list_lock);
list_del(&temp->hwmon_node);
kfree(temp);
if (!list_empty(&hwmon->tz_list)) {
mutex_unlock(&thermal_list_lock);
return;
}
list_del(&hwmon->node);
mutex_unlock(&thermal_list_lock);
device_remove_file(hwmon->device, &dev_attr_name);
hwmon_device_unregister(hwmon->device);
kfree(hwmon);
}
#else
static int
thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
{
return 0;
}
static void
thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz)
{
}
#endif
static void thermal_zone_device_set_polling(struct thermal_zone_device *tz,
int delay)
{
cancel_delayed_work(&(tz->poll_queue));
if (!delay)
return;
if (delay > 1000)
queue_delayed_work(system_freezable_wq, &(tz->poll_queue),
round_jiffies(msecs_to_jiffies(delay)));
else
queue_delayed_work(system_freezable_wq, &(tz->poll_queue),
msecs_to_jiffies(delay));
}
static void thermal_zone_device_passive(struct thermal_zone_device *tz,
int temp, int trip_temp, int trip)
{
int trend = 0;
struct thermal_cooling_device_instance *instance;
struct thermal_cooling_device *cdev;
long state, max_state;
/*
* Above Trip?
* -----------
* Calculate the thermal trend (using the passive cooling equation)
* and modify the performance limit for all passive cooling devices
* accordingly. Note that we assume symmetry.
*/
if (temp >= trip_temp) {
tz->passive = true;
trend = (tz->tc1 * (temp - tz->last_temperature)) +
(tz->tc2 * (temp - trip_temp));
/* Heating up? */
if (trend > 0) {
list_for_each_entry(instance, &tz->cooling_devices,
node) {
if (instance->trip != trip)
continue;
cdev = instance->cdev;
cdev->ops->get_cur_state(cdev, &state);
cdev->ops->get_max_state(cdev, &max_state);
if (state++ < max_state)
cdev->ops->set_cur_state(cdev, state);
}
} else if (trend < 0) { /* Cooling off? */
list_for_each_entry(instance, &tz->cooling_devices,
node) {
if (instance->trip != trip)
continue;
cdev = instance->cdev;
cdev->ops->get_cur_state(cdev, &state);
cdev->ops->get_max_state(cdev, &max_state);
if (state > 0)
cdev->ops->set_cur_state(cdev, --state);
}
}
return;
}
/*
* Below Trip?
* -----------
* Implement passive cooling hysteresis to slowly increase performance
* and avoid thrashing around the passive trip point. Note that we
* assume symmetry.
*/
list_for_each_entry(instance, &tz->cooling_devices, node) {
if (instance->trip != trip)
continue;
cdev = instance->cdev;
cdev->ops->get_cur_state(cdev, &state);
cdev->ops->get_max_state(cdev, &max_state);
if (state > 0)
cdev->ops->set_cur_state(cdev, --state);
if (state == 0)
tz->passive = false;
}
}
static void thermal_zone_device_check(struct work_struct *work)
{
struct thermal_zone_device *tz = container_of(work, struct
thermal_zone_device,
poll_queue.work);
thermal_zone_device_update(tz);
}
/**
* thermal_zone_bind_cooling_device - bind a cooling device to a thermal zone
* @tz: thermal zone device
* @trip: indicates which trip point the cooling devices is
* associated with in this thermal zone.
* @cdev: thermal cooling device
*
* This function is usually called in the thermal zone device .bind callback.
*/
int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
int trip,
struct thermal_cooling_device *cdev)
{
struct thermal_cooling_device_instance *dev;
struct thermal_cooling_device_instance *pos;
struct thermal_zone_device *pos1;
struct thermal_cooling_device *pos2;
int result;
if (trip >= tz->trips || (trip < 0 && trip != THERMAL_TRIPS_NONE))
return -EINVAL;
list_for_each_entry(pos1, &thermal_tz_list, node) {
if (pos1 == tz)
break;
}
list_for_each_entry(pos2, &thermal_cdev_list, node) {
if (pos2 == cdev)
break;
}
if (tz != pos1 || cdev != pos2)
return -EINVAL;
dev =
kzalloc(sizeof(struct thermal_cooling_device_instance), GFP_KERNEL);
if (!dev)
return -ENOMEM;
dev->tz = tz;
dev->cdev = cdev;
dev->trip = trip;
result = get_idr(&tz->idr, &tz->lock, &dev->id);
if (result)
goto free_mem;
sprintf(dev->name, "cdev%d", dev->id);
result =
sysfs_create_link(&tz->device.kobj, &cdev->device.kobj, dev->name);
if (result)
goto release_idr;
sprintf(dev->attr_name, "cdev%d_trip_point", dev->id);
sysfs_attr_init(&dev->attr.attr);
dev->attr.attr.name = dev->attr_name;
dev->attr.attr.mode = 0444;
dev->attr.show = thermal_cooling_device_trip_point_show;
result = device_create_file(&tz->device, &dev->attr);
if (result)
goto remove_symbol_link;
mutex_lock(&tz->lock);
list_for_each_entry(pos, &tz->cooling_devices, node)
if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) {
result = -EEXIST;
break;
}
if (!result)
list_add_tail(&dev->node, &tz->cooling_devices);
mutex_unlock(&tz->lock);
if (!result)
return 0;
device_remove_file(&tz->device, &dev->attr);
remove_symbol_link:
sysfs_remove_link(&tz->device.kobj, dev->name);
release_idr:
release_idr(&tz->idr, &tz->lock, dev->id);
free_mem:
kfree(dev);
return result;
}
EXPORT_SYMBOL(thermal_zone_bind_cooling_device);
/**
* thermal_zone_unbind_cooling_device - unbind a cooling device from a thermal zone
* @tz: thermal zone device
* @trip: indicates which trip point the cooling devices is
* associated with in this thermal zone.
* @cdev: thermal cooling device
*
* This function is usually called in the thermal zone device .unbind callback.
*/
int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz,
int trip,
struct thermal_cooling_device *cdev)
{
struct thermal_cooling_device_instance *pos, *next;
mutex_lock(&tz->lock);
list_for_each_entry_safe(pos, next, &tz->cooling_devices, node) {
if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) {
list_del(&pos->node);
mutex_unlock(&tz->lock);
goto unbind;
}
}
mutex_unlock(&tz->lock);
return -ENODEV;
unbind:
device_remove_file(&tz->device, &pos->attr);
sysfs_remove_link(&tz->device.kobj, pos->name);
release_idr(&tz->idr, &tz->lock, pos->id);
kfree(pos);
return 0;
}
EXPORT_SYMBOL(thermal_zone_unbind_cooling_device);
static void thermal_release(struct device *dev)
{
struct thermal_zone_device *tz;
struct thermal_cooling_device *cdev;
if (!strncmp(dev_name(dev), "thermal_zone",
sizeof("thermal_zone") - 1)) {
tz = to_thermal_zone(dev);
kfree(tz);
} else {
cdev = to_cooling_device(dev);
kfree(cdev);
}
}
static struct class thermal_class = {
.name = "thermal",
.dev_release = thermal_release,
};
/**
* thermal_cooling_device_register - register a new thermal cooling device
* @type: the thermal cooling device type.
* @devdata: device private data.
* @ops: standard thermal cooling devices callbacks.
*/
struct thermal_cooling_device *
thermal_cooling_device_register(char *type, void *devdata,
const struct thermal_cooling_device_ops *ops)
{
struct thermal_cooling_device *cdev;
struct thermal_zone_device *pos;
int result;
if (strlen(type) >= THERMAL_NAME_LENGTH)
return ERR_PTR(-EINVAL);
if (!ops || !ops->get_max_state || !ops->get_cur_state ||
!ops->set_cur_state)
return ERR_PTR(-EINVAL);
cdev = kzalloc(sizeof(struct thermal_cooling_device), GFP_KERNEL);
if (!cdev)
return ERR_PTR(-ENOMEM);
result = get_idr(&thermal_cdev_idr, &thermal_idr_lock, &cdev->id);
if (result) {
kfree(cdev);
return ERR_PTR(result);
}
strcpy(cdev->type, type);
cdev->ops = ops;
cdev->device.class = &thermal_class;
cdev->devdata = devdata;
dev_set_name(&cdev->device, "cooling_device%d", cdev->id);
result = device_register(&cdev->device);
if (result) {
release_idr(&thermal_cdev_idr, &thermal_idr_lock, cdev->id);
kfree(cdev);
return ERR_PTR(result);
}
/* sys I/F */
if (type) {
result = device_create_file(&cdev->device, &dev_attr_cdev_type);
if (result)
goto unregister;
}
result = device_create_file(&cdev->device, &dev_attr_max_state);
if (result)
goto unregister;
result = device_create_file(&cdev->device, &dev_attr_cur_state);
if (result)
goto unregister;
mutex_lock(&thermal_list_lock);
list_add(&cdev->node, &thermal_cdev_list);
list_for_each_entry(pos, &thermal_tz_list, node) {
if (!pos->ops->bind)
continue;
result = pos->ops->bind(pos, cdev);
if (result)
break;
}
mutex_unlock(&thermal_list_lock);
if (!result)
return cdev;
unregister:
release_idr(&thermal_cdev_idr, &thermal_idr_lock, cdev->id);
device_unregister(&cdev->device);
return ERR_PTR(result);
}
EXPORT_SYMBOL(thermal_cooling_device_register);
/**
* thermal_cooling_device_unregister - removes the registered thermal cooling device
* @cdev: the thermal cooling device to remove.
*
* thermal_cooling_device_unregister() must be called when the device is no
* longer needed.
*/
void thermal_cooling_device_unregister(struct
thermal_cooling_device
*cdev)
{
struct thermal_zone_device *tz;
struct thermal_cooling_device *pos = NULL;
if (!cdev)
return;
mutex_lock(&thermal_list_lock);
list_for_each_entry(pos, &thermal_cdev_list, node)
if (pos == cdev)
break;
if (pos != cdev) {
/* thermal cooling device not found */
mutex_unlock(&thermal_list_lock);
return;
}
list_del(&cdev->node);
list_for_each_entry(tz, &thermal_tz_list, node) {
if (!tz->ops->unbind)
continue;
tz->ops->unbind(tz, cdev);
}
mutex_unlock(&thermal_list_lock);
if (cdev->type[0])
device_remove_file(&cdev->device, &dev_attr_cdev_type);
device_remove_file(&cdev->device, &dev_attr_max_state);
device_remove_file(&cdev->device, &dev_attr_cur_state);
release_idr(&thermal_cdev_idr, &thermal_idr_lock, cdev->id);
device_unregister(&cdev->device);
return;
}
EXPORT_SYMBOL(thermal_cooling_device_unregister);
/**
* thermal_zone_device_update - force an update of a thermal zone's state
* @ttz: the thermal zone to update
*/
void thermal_zone_device_update(struct thermal_zone_device *tz)
{
int count, ret = 0;
long temp, trip_temp;
enum thermal_trip_type trip_type;
struct thermal_cooling_device_instance *instance;
struct thermal_cooling_device *cdev;
mutex_lock(&tz->lock);
if (tz->ops->get_temp(tz, &temp)) {
/* get_temp failed - retry it later */
pr_warn("failed to read out thermal zone %d\n", tz->id);
goto leave;
}
for (count = 0; count < tz->trips; count++) {
tz->ops->get_trip_type(tz, count, &trip_type);
tz->ops->get_trip_temp(tz, count, &trip_temp);
switch (trip_type) {
case THERMAL_TRIP_CRITICAL:
if (temp >= trip_temp) {
if (tz->ops->notify)
ret = tz->ops->notify(tz, count,
trip_type);
if (!ret) {
pr_emerg("Critical temperature reached (%ld C), shutting down\n",
temp/1000);
orderly_poweroff(true);
}
}
break;
case THERMAL_TRIP_HOT:
if (temp >= trip_temp)
if (tz->ops->notify)
tz->ops->notify(tz, count, trip_type);
break;
case THERMAL_TRIP_ACTIVE:
list_for_each_entry(instance, &tz->cooling_devices,
node) {
if (instance->trip != count)
continue;
cdev = instance->cdev;
if (temp >= trip_temp)
cdev->ops->set_cur_state(cdev, 1);
else
cdev->ops->set_cur_state(cdev, 0);
}
break;
case THERMAL_TRIP_PASSIVE:
if (temp >= trip_temp || tz->passive)
thermal_zone_device_passive(tz, temp,
trip_temp, count);
break;
}
}
if (tz->forced_passive)
thermal_zone_device_passive(tz, temp, tz->forced_passive,
THERMAL_TRIPS_NONE);
tz->last_temperature = temp;
leave:
if (tz->passive)
thermal_zone_device_set_polling(tz, tz->passive_delay);
else if (tz->polling_delay)
thermal_zone_device_set_polling(tz, tz->polling_delay);
else
thermal_zone_device_set_polling(tz, 0);
mutex_unlock(&tz->lock);
}
EXPORT_SYMBOL(thermal_zone_device_update);
/**
* create_trip_attrs - create attributes for trip points
* @tz: the thermal zone device
* @mask: Writeable trip point bitmap.
*/
static int create_trip_attrs(struct thermal_zone_device *tz, int mask)
{
int indx;
int size = sizeof(struct thermal_attr) * tz->trips;
tz->trip_type_attrs = kzalloc(size, GFP_KERNEL);
if (!tz->trip_type_attrs)
return -ENOMEM;
tz->trip_temp_attrs = kzalloc(size, GFP_KERNEL);
if (!tz->trip_temp_attrs) {
kfree(tz->trip_type_attrs);
return -ENOMEM;
}
if (tz->ops->get_trip_hyst) {
tz->trip_hyst_attrs = kzalloc(size, GFP_KERNEL);
if (!tz->trip_hyst_attrs) {
kfree(tz->trip_type_attrs);
kfree(tz->trip_temp_attrs);
return -ENOMEM;
}
}
for (indx = 0; indx < tz->trips; indx++) {
/* create trip type attribute */
snprintf(tz->trip_type_attrs[indx].name, THERMAL_NAME_LENGTH,
"trip_point_%d_type", indx);
sysfs_attr_init(&tz->trip_type_attrs[indx].attr.attr);
tz->trip_type_attrs[indx].attr.attr.name =
tz->trip_type_attrs[indx].name;
tz->trip_type_attrs[indx].attr.attr.mode = S_IRUGO;
tz->trip_type_attrs[indx].attr.show = trip_point_type_show;
device_create_file(&tz->device,
&tz->trip_type_attrs[indx].attr);
/* create trip temp attribute */
snprintf(tz->trip_temp_attrs[indx].name, THERMAL_NAME_LENGTH,
"trip_point_%d_temp", indx);
sysfs_attr_init(&tz->trip_temp_attrs[indx].attr.attr);
tz->trip_temp_attrs[indx].attr.attr.name =
tz->trip_temp_attrs[indx].name;
tz->trip_temp_attrs[indx].attr.attr.mode = S_IRUGO;
tz->trip_temp_attrs[indx].attr.show = trip_point_temp_show;
if (mask & (1 << indx)) {
tz->trip_temp_attrs[indx].attr.attr.mode |= S_IWUSR;
tz->trip_temp_attrs[indx].attr.store =
trip_point_temp_store;
}
device_create_file(&tz->device,
&tz->trip_temp_attrs[indx].attr);
/* create Optional trip hyst attribute */
if (!tz->ops->get_trip_hyst)
continue;
snprintf(tz->trip_hyst_attrs[indx].name, THERMAL_NAME_LENGTH,
"trip_point_%d_hyst", indx);
sysfs_attr_init(&tz->trip_hyst_attrs[indx].attr.attr);
tz->trip_hyst_attrs[indx].attr.attr.name =
tz->trip_hyst_attrs[indx].name;
tz->trip_hyst_attrs[indx].attr.attr.mode = S_IRUGO;
tz->trip_hyst_attrs[indx].attr.show = trip_point_hyst_show;
if (tz->ops->set_trip_hyst) {
tz->trip_hyst_attrs[indx].attr.attr.mode |= S_IWUSR;
tz->trip_hyst_attrs[indx].attr.store =
trip_point_hyst_store;
}
device_create_file(&tz->device,
&tz->trip_hyst_attrs[indx].attr);
}
return 0;
}
static void remove_trip_attrs(struct thermal_zone_device *tz)
{
int indx;
for (indx = 0; indx < tz->trips; indx++) {
device_remove_file(&tz->device,
&tz->trip_type_attrs[indx].attr);
device_remove_file(&tz->device,
&tz->trip_temp_attrs[indx].attr);
if (tz->ops->get_trip_hyst)
device_remove_file(&tz->device,
&tz->trip_hyst_attrs[indx].attr);
}
kfree(tz->trip_type_attrs);
kfree(tz->trip_temp_attrs);
kfree(tz->trip_hyst_attrs);
}
/**
* thermal_zone_device_register - register a new thermal zone device
* @type: the thermal zone device type
* @trips: the number of trip points the thermal zone support
* @mask: a bit string indicating the writeablility of trip points
* @devdata: private device data
* @ops: standard thermal zone device callbacks
* @tc1: thermal coefficient 1 for passive calculations
* @tc2: thermal coefficient 2 for passive calculations
* @passive_delay: number of milliseconds to wait between polls when
* performing passive cooling
* @polling_delay: number of milliseconds to wait between polls when checking
* whether trip points have been crossed (0 for interrupt
* driven systems)
*
* thermal_zone_device_unregister() must be called when the device is no
* longer needed. The passive cooling formula uses tc1 and tc2 as described in
* section 11.1.5.1 of the ACPI specification 3.0.
*/
struct thermal_zone_device *thermal_zone_device_register(const char *type,
int trips, int mask, void *devdata,
const struct thermal_zone_device_ops *ops,
int tc1, int tc2, int passive_delay, int polling_delay)
{
struct thermal_zone_device *tz;
struct thermal_cooling_device *pos;
enum thermal_trip_type trip_type;
int result;
int count;
int passive = 0;
if (strlen(type) >= THERMAL_NAME_LENGTH)
return ERR_PTR(-EINVAL);
if (trips > THERMAL_MAX_TRIPS || trips < 0 || mask >> trips)
return ERR_PTR(-EINVAL);
if (!ops || !ops->get_temp)
return ERR_PTR(-EINVAL);
tz = kzalloc(sizeof(struct thermal_zone_device), GFP_KERNEL);
if (!tz)
return ERR_PTR(-ENOMEM);
INIT_LIST_HEAD(&tz->cooling_devices);
idr_init(&tz->idr);
mutex_init(&tz->lock);
result = get_idr(&thermal_tz_idr, &thermal_idr_lock, &tz->id);
if (result) {
kfree(tz);
return ERR_PTR(result);
}
strcpy(tz->type, type);
tz->ops = ops;
tz->device.class = &thermal_class;
tz->devdata = devdata;
tz->trips = trips;
tz->tc1 = tc1;
tz->tc2 = tc2;
tz->passive_delay = passive_delay;
tz->polling_delay = polling_delay;
dev_set_name(&tz->device, "thermal_zone%d", tz->id);
result = device_register(&tz->device);
if (result) {
release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id);
kfree(tz);
return ERR_PTR(result);
}
/* sys I/F */
if (type) {
result = device_create_file(&tz->device, &dev_attr_type);
if (result)
goto unregister;
}
result = device_create_file(&tz->device, &dev_attr_temp);
if (result)
goto unregister;
if (ops->get_mode) {
result = device_create_file(&tz->device, &dev_attr_mode);
if (result)
goto unregister;
}
result = create_trip_attrs(tz, mask);
if (result)
goto unregister;
for (count = 0; count < trips; count++) {
tz->ops->get_trip_type(tz, count, &trip_type);
if (trip_type == THERMAL_TRIP_PASSIVE)
passive = 1;
}
if (!passive)
result = device_create_file(&tz->device,
&dev_attr_passive);
if (result)
goto unregister;
result = thermal_add_hwmon_sysfs(tz);
if (result)
goto unregister;
mutex_lock(&thermal_list_lock);
list_add_tail(&tz->node, &thermal_tz_list);
if (ops->bind)
list_for_each_entry(pos, &thermal_cdev_list, node) {
result = ops->bind(tz, pos);
if (result)
break;
}
mutex_unlock(&thermal_list_lock);
INIT_DELAYED_WORK(&(tz->poll_queue), thermal_zone_device_check);
thermal_zone_device_update(tz);
if (!result)
return tz;
unregister:
release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id);
device_unregister(&tz->device);
return ERR_PTR(result);
}
EXPORT_SYMBOL(thermal_zone_device_register);
/**
* thermal_device_unregister - removes the registered thermal zone device
* @tz: the thermal zone device to remove
*/
void thermal_zone_device_unregister(struct thermal_zone_device *tz)
{
struct thermal_cooling_device *cdev;
struct thermal_zone_device *pos = NULL;
if (!tz)
return;
mutex_lock(&thermal_list_lock);
list_for_each_entry(pos, &thermal_tz_list, node)
if (pos == tz)
break;
if (pos != tz) {
/* thermal zone device not found */
mutex_unlock(&thermal_list_lock);
return;
}
list_del(&tz->node);
if (tz->ops->unbind)
list_for_each_entry(cdev, &thermal_cdev_list, node)
tz->ops->unbind(tz, cdev);
mutex_unlock(&thermal_list_lock);
thermal_zone_device_set_polling(tz, 0);
if (tz->type[0])
device_remove_file(&tz->device, &dev_attr_type);
device_remove_file(&tz->device, &dev_attr_temp);
if (tz->ops->get_mode)
device_remove_file(&tz->device, &dev_attr_mode);
remove_trip_attrs(tz);
thermal_remove_hwmon_sysfs(tz);
release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id);
idr_destroy(&tz->idr);
mutex_destroy(&tz->lock);
device_unregister(&tz->device);
return;
}
EXPORT_SYMBOL(thermal_zone_device_unregister);
#ifdef CONFIG_NET
static struct genl_family thermal_event_genl_family = {
.id = GENL_ID_GENERATE,
.name = THERMAL_GENL_FAMILY_NAME,
.version = THERMAL_GENL_VERSION,
.maxattr = THERMAL_GENL_ATTR_MAX,
};
static struct genl_multicast_group thermal_event_mcgrp = {
.name = THERMAL_GENL_MCAST_GROUP_NAME,
};
int thermal_generate_netlink_event(u32 orig, enum events event)
{
struct sk_buff *skb;
struct nlattr *attr;
struct thermal_genl_event *thermal_event;
void *msg_header;
int size;
int result;
static unsigned int thermal_event_seqnum;
/* allocate memory */
size = nla_total_size(sizeof(struct thermal_genl_event)) +
nla_total_size(0);
skb = genlmsg_new(size, GFP_ATOMIC);
if (!skb)
return -ENOMEM;
/* add the genetlink message header */
msg_header = genlmsg_put(skb, 0, thermal_event_seqnum++,
&thermal_event_genl_family, 0,
THERMAL_GENL_CMD_EVENT);
if (!msg_header) {
nlmsg_free(skb);
return -ENOMEM;
}
/* fill the data */
attr = nla_reserve(skb, THERMAL_GENL_ATTR_EVENT,
sizeof(struct thermal_genl_event));
if (!attr) {
nlmsg_free(skb);
return -EINVAL;
}
thermal_event = nla_data(attr);
if (!thermal_event) {
nlmsg_free(skb);
return -EINVAL;
}
memset(thermal_event, 0, sizeof(struct thermal_genl_event));
thermal_event->orig = orig;
thermal_event->event = event;
/* send multicast genetlink message */
result = genlmsg_end(skb, msg_header);
if (result < 0) {
nlmsg_free(skb);
return result;
}
result = genlmsg_multicast(skb, 0, thermal_event_mcgrp.id, GFP_ATOMIC);
if (result)
pr_info("failed to send netlink event:%d\n", result);
return result;
}
EXPORT_SYMBOL(thermal_generate_netlink_event);
static int genetlink_init(void)
{
int result;
result = genl_register_family(&thermal_event_genl_family);
if (result)
return result;
result = genl_register_mc_group(&thermal_event_genl_family,
&thermal_event_mcgrp);
if (result)
genl_unregister_family(&thermal_event_genl_family);
return result;
}
static void genetlink_exit(void)
{
genl_unregister_family(&thermal_event_genl_family);
}
#else /* !CONFIG_NET */
static inline int genetlink_init(void) { return 0; }
static inline void genetlink_exit(void) {}
#endif /* !CONFIG_NET */
static int __init thermal_init(void)
{
int result = 0;
result = class_register(&thermal_class);
if (result) {
idr_destroy(&thermal_tz_idr);
idr_destroy(&thermal_cdev_idr);
mutex_destroy(&thermal_idr_lock);
mutex_destroy(&thermal_list_lock);
}
result = genetlink_init();
return result;
}
static void __exit thermal_exit(void)
{
class_unregister(&thermal_class);
idr_destroy(&thermal_tz_idr);
idr_destroy(&thermal_cdev_idr);
mutex_destroy(&thermal_idr_lock);
mutex_destroy(&thermal_list_lock);
genetlink_exit();
}
fs_initcall(thermal_init);
module_exit(thermal_exit);