linux/arch/mips/sni/int-handler.S
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

106 lines
2.2 KiB
ArmAsm

/*
* SNI RM200 PCI specific interrupt handler code.
*
* Copyright (C) 1994, 95, 96, 97, 98, 1999, 2000, 01 by Ralf Baechle
*/
#include <asm/asm.h>
#include <asm/mipsregs.h>
#include <asm/regdef.h>
#include <asm/sni.h>
#include <asm/stackframe.h>
/*
* The PCI ASIC has the nasty property that it may delay writes if it is busy.
* As a consequence from writes that have not graduated when we exit from the
* interrupt handler we might catch a spurious interrupt. To avoid this we
* force the PCI ASIC to graduate all writes by executing a read from the
* PCI bus.
*/
.set noreorder
.set noat
.align 5
NESTED(sni_rm200_pci_handle_int, PT_SIZE, sp)
SAVE_ALL
CLI
.set at
/* Blinken light ... */
lb t0, led_cache
addiu t0, 1
sb t0, led_cache
sb t0, PCIMT_CSLED # write only register
.data
led_cache: .byte 0
.text
mfc0 t0, CP0_STATUS
mfc0 t1, CP0_CAUSE
and t0, t1
andi t1, t0, 0x0800 # hardware interrupt 1
bnez t1, _hwint1
andi t1, t0, 0x4000 # hardware interrupt 4
bnez t1, _hwint4
andi t1, t0, 0x2000 # hardware interrupt 3
bnez t1, _hwint3
andi t1, t0, 0x1000 # hardware interrupt 2
bnez t1, _hwint2
andi t1, t0, 0x8000 # hardware interrupt 5
bnez t1, _hwint5
andi t1, t0, 0x0400 # hardware interrupt 0
bnez t1, _hwint0
nop
j restore_all # spurious interrupt
nop
##############################################################################
/* hwint0 should deal with MP agent, ASIC PCI, EISA NMI and debug
button interrupts. */
_hwint0: jal pciasic_hwint0
move a0, sp
j ret_from_irq
nop
/*
* hwint 1 deals with EISA and SCSI interrupts
*/
_hwint1: jal pciasic_hwint1
move a0, sp
j ret_from_irq
nop
/*
* This interrupt was used for the com1 console on the first prototypes;
* it's unsed otherwise
*/
_hwint2: jal pciasic_hwint2
move a0, sp
j ret_from_irq
nop
/*
* hwint 3 are the PCI interrupts A - D
*/
_hwint3: jal pciasic_hwint3
move a0, sp
j ret_from_irq
nop
/*
* hwint 4 is used for only the onboard PCnet 32.
*/
_hwint4: jal pciasic_hwint4
move a0, sp
j ret_from_irq
nop
/* hwint5 is the r4k count / compare interrupt */
_hwint5: jal pciasic_hwint5
move a0, sp
j ret_from_irq
nop
END(sni_rm200_pci_handle_int)