linux/arch/arm/mach-ep93xx/core.c
Thomas Gleixner 52e405eaa9 [PATCH] ARM: fixup irqflags breakage after ARM genirq merge
The irgflags consolidation did conflict with the ARM to generic IRQ
conversion and was not applied for ARM. Fix it up.

Use the new IRQF_ constants and remove the SA_INTERRUPT define

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 17:29:22 -07:00

480 lines
12 KiB
C

/*
* arch/arm/mach-ep93xx/core.c
* Core routines for Cirrus EP93xx chips.
*
* Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
*
* Thanks go to Michael Burian and Ray Lehtiniemi for their key
* role in the ep93xx linux community.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/bitops.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/serial_core.h>
#include <linux/device.h>
#include <linux/mm.h>
#include <linux/time.h>
#include <linux/timex.h>
#include <linux/delay.h>
#include <linux/termios.h>
#include <linux/amba/bus.h>
#include <linux/amba/serial.h>
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/tlbflush.h>
#include <asm/pgtable.h>
#include <asm/io.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <asm/arch/gpio.h>
#include <asm/hardware/vic.h>
/*************************************************************************
* Static I/O mappings that are needed for all EP93xx platforms
*************************************************************************/
static struct map_desc ep93xx_io_desc[] __initdata = {
{
.virtual = EP93XX_AHB_VIRT_BASE,
.pfn = __phys_to_pfn(EP93XX_AHB_PHYS_BASE),
.length = EP93XX_AHB_SIZE,
.type = MT_DEVICE,
}, {
.virtual = EP93XX_APB_VIRT_BASE,
.pfn = __phys_to_pfn(EP93XX_APB_PHYS_BASE),
.length = EP93XX_APB_SIZE,
.type = MT_DEVICE,
},
};
void __init ep93xx_map_io(void)
{
iotable_init(ep93xx_io_desc, ARRAY_SIZE(ep93xx_io_desc));
}
/*************************************************************************
* Timer handling for EP93xx
*************************************************************************
* The ep93xx has four internal timers. Timers 1, 2 (both 16 bit) and
* 3 (32 bit) count down at 508 kHz, are self-reloading, and can generate
* an interrupt on underflow. Timer 4 (40 bit) counts down at 983.04 kHz,
* is free-running, and can't generate interrupts.
*
* The 508 kHz timers are ideal for use for the timer interrupt, as the
* most common values of HZ divide 508 kHz nicely. We pick one of the 16
* bit timers (timer 1) since we don't need more than 16 bits of reload
* value as long as HZ >= 8.
*
* The higher clock rate of timer 4 makes it a better choice than the
* other timers for use in gettimeoffset(), while the fact that it can't
* generate interrupts means we don't have to worry about not being able
* to use this timer for something else. We also use timer 4 for keeping
* track of lost jiffies.
*/
static unsigned int last_jiffy_time;
#define TIMER4_TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ)
static int ep93xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
write_seqlock(&xtime_lock);
__raw_writel(1, EP93XX_TIMER1_CLEAR);
while ((signed long)
(__raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time)
>= TIMER4_TICKS_PER_JIFFY) {
last_jiffy_time += TIMER4_TICKS_PER_JIFFY;
timer_tick(regs);
}
write_sequnlock(&xtime_lock);
return IRQ_HANDLED;
}
static struct irqaction ep93xx_timer_irq = {
.name = "ep93xx timer",
.flags = IRQF_DISABLED | IRQF_TIMER,
.handler = ep93xx_timer_interrupt,
};
static void __init ep93xx_timer_init(void)
{
/* Enable periodic HZ timer. */
__raw_writel(0x48, EP93XX_TIMER1_CONTROL);
__raw_writel((508469 / HZ) - 1, EP93XX_TIMER1_LOAD);
__raw_writel(0xc8, EP93XX_TIMER1_CONTROL);
/* Enable lost jiffy timer. */
__raw_writel(0x100, EP93XX_TIMER4_VALUE_HIGH);
setup_irq(IRQ_EP93XX_TIMER1, &ep93xx_timer_irq);
}
static unsigned long ep93xx_gettimeoffset(void)
{
int offset;
offset = __raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time;
/* Calculate (1000000 / 983040) * offset. */
return offset + (53 * offset / 3072);
}
struct sys_timer ep93xx_timer = {
.init = ep93xx_timer_init,
.offset = ep93xx_gettimeoffset,
};
/*************************************************************************
* GPIO handling for EP93xx
*************************************************************************/
static unsigned char gpio_int_enable[2];
static unsigned char gpio_int_type1[2];
static unsigned char gpio_int_type2[2];
static void update_gpio_ab_int_params(int port)
{
if (port == 0) {
__raw_writeb(0, EP93XX_GPIO_A_INT_ENABLE);
__raw_writeb(gpio_int_type2[0], EP93XX_GPIO_A_INT_TYPE2);
__raw_writeb(gpio_int_type1[0], EP93XX_GPIO_A_INT_TYPE1);
__raw_writeb(gpio_int_enable[0], EP93XX_GPIO_A_INT_ENABLE);
} else if (port == 1) {
__raw_writeb(0, EP93XX_GPIO_B_INT_ENABLE);
__raw_writeb(gpio_int_type2[1], EP93XX_GPIO_B_INT_TYPE2);
__raw_writeb(gpio_int_type1[1], EP93XX_GPIO_B_INT_TYPE1);
__raw_writeb(gpio_int_enable[1], EP93XX_GPIO_B_INT_ENABLE);
}
}
static unsigned char data_register_offset[8] = {
0x00, 0x04, 0x08, 0x0c, 0x20, 0x30, 0x38, 0x40,
};
static unsigned char data_direction_register_offset[8] = {
0x10, 0x14, 0x18, 0x1c, 0x24, 0x34, 0x3c, 0x44,
};
void gpio_line_config(int line, int direction)
{
unsigned int data_direction_register;
unsigned long flags;
unsigned char v;
data_direction_register =
EP93XX_GPIO_REG(data_direction_register_offset[line >> 3]);
local_irq_save(flags);
if (direction == GPIO_OUT) {
if (line >= 0 && line < 16) {
gpio_int_enable[line >> 3] &= ~(1 << (line & 7));
update_gpio_ab_int_params(line >> 3);
}
v = __raw_readb(data_direction_register);
v |= 1 << (line & 7);
__raw_writeb(v, data_direction_register);
} else if (direction == GPIO_IN) {
v = __raw_readb(data_direction_register);
v &= ~(1 << (line & 7));
__raw_writeb(v, data_direction_register);
}
local_irq_restore(flags);
}
EXPORT_SYMBOL(gpio_line_config);
int gpio_line_get(int line)
{
unsigned int data_register;
data_register = EP93XX_GPIO_REG(data_register_offset[line >> 3]);
return !!(__raw_readb(data_register) & (1 << (line & 7)));
}
EXPORT_SYMBOL(gpio_line_get);
void gpio_line_set(int line, int value)
{
unsigned int data_register;
unsigned long flags;
unsigned char v;
data_register = EP93XX_GPIO_REG(data_register_offset[line >> 3]);
local_irq_save(flags);
if (value == EP93XX_GPIO_HIGH) {
v = __raw_readb(data_register);
v |= 1 << (line & 7);
__raw_writeb(v, data_register);
} else if (value == EP93XX_GPIO_LOW) {
v = __raw_readb(data_register);
v &= ~(1 << (line & 7));
__raw_writeb(v, data_register);
}
local_irq_restore(flags);
}
EXPORT_SYMBOL(gpio_line_set);
/*************************************************************************
* EP93xx IRQ handling
*************************************************************************/
static void ep93xx_gpio_ab_irq_handler(unsigned int irq,
struct irqdesc *desc, struct pt_regs *regs)
{
unsigned char status;
int i;
status = __raw_readb(EP93XX_GPIO_A_INT_STATUS);
for (i = 0; i < 8; i++) {
if (status & (1 << i)) {
desc = irq_desc + IRQ_EP93XX_GPIO(0) + i;
desc_handle_irq(IRQ_EP93XX_GPIO(0) + i, desc, regs);
}
}
status = __raw_readb(EP93XX_GPIO_B_INT_STATUS);
for (i = 0; i < 8; i++) {
if (status & (1 << i)) {
desc = irq_desc + IRQ_EP93XX_GPIO(8) + i;
desc_handle_irq(IRQ_EP93XX_GPIO(8) + i, desc, regs);
}
}
}
static void ep93xx_gpio_ab_irq_mask_ack(unsigned int irq)
{
int line = irq - IRQ_EP93XX_GPIO(0);
int port = line >> 3;
gpio_int_enable[port] &= ~(1 << (line & 7));
update_gpio_ab_int_params(port);
if (line >> 3) {
__raw_writel(1 << (line & 7), EP93XX_GPIO_B_INT_ACK);
} else {
__raw_writel(1 << (line & 7), EP93XX_GPIO_A_INT_ACK);
}
}
static void ep93xx_gpio_ab_irq_mask(unsigned int irq)
{
int line = irq - IRQ_EP93XX_GPIO(0);
int port = line >> 3;
gpio_int_enable[port] &= ~(1 << (line & 7));
update_gpio_ab_int_params(port);
}
static void ep93xx_gpio_ab_irq_unmask(unsigned int irq)
{
int line = irq - IRQ_EP93XX_GPIO(0);
int port = line >> 3;
gpio_int_enable[port] |= 1 << (line & 7);
update_gpio_ab_int_params(port);
}
/*
* gpio_int_type1 controls whether the interrupt is level (0) or
* edge (1) triggered, while gpio_int_type2 controls whether it
* triggers on low/falling (0) or high/rising (1).
*/
static int ep93xx_gpio_ab_irq_type(unsigned int irq, unsigned int type)
{
int port;
int line;
line = irq - IRQ_EP93XX_GPIO(0);
gpio_line_config(line, GPIO_IN);
port = line >> 3;
line &= 7;
if (type & IRQT_RISING) {
gpio_int_type1[port] |= 1 << line;
gpio_int_type2[port] |= 1 << line;
} else if (type & IRQT_FALLING) {
gpio_int_type1[port] |= 1 << line;
gpio_int_type2[port] &= ~(1 << line);
} else if (type & IRQT_HIGH) {
gpio_int_type1[port] &= ~(1 << line);
gpio_int_type2[port] |= 1 << line;
} else if (type & IRQT_LOW) {
gpio_int_type1[port] &= ~(1 << line);
gpio_int_type2[port] &= ~(1 << line);
}
update_gpio_ab_int_params(port);
return 0;
}
static struct irqchip ep93xx_gpio_ab_irq_chip = {
.ack = ep93xx_gpio_ab_irq_mask_ack,
.mask = ep93xx_gpio_ab_irq_mask,
.unmask = ep93xx_gpio_ab_irq_unmask,
.set_type = ep93xx_gpio_ab_irq_type,
};
void __init ep93xx_init_irq(void)
{
int irq;
vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK);
vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK);
for (irq = IRQ_EP93XX_GPIO(0) ; irq <= IRQ_EP93XX_GPIO(15); irq++) {
set_irq_chip(irq, &ep93xx_gpio_ab_irq_chip);
set_irq_handler(irq, do_level_IRQ);
set_irq_flags(irq, IRQF_VALID);
}
set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler);
}
/*************************************************************************
* EP93xx peripheral handling
*************************************************************************/
#define EP93XX_UART_MCR_OFFSET (0x0100)
static void ep93xx_uart_set_mctrl(struct amba_device *dev,
void __iomem *base, unsigned int mctrl)
{
unsigned int mcr;
mcr = 0;
if (!(mctrl & TIOCM_RTS))
mcr |= 2;
if (!(mctrl & TIOCM_DTR))
mcr |= 1;
__raw_writel(mcr, base + EP93XX_UART_MCR_OFFSET);
}
static struct amba_pl010_data ep93xx_uart_data = {
.set_mctrl = ep93xx_uart_set_mctrl,
};
static struct amba_device uart1_device = {
.dev = {
.bus_id = "apb:uart1",
.platform_data = &ep93xx_uart_data,
},
.res = {
.start = EP93XX_UART1_PHYS_BASE,
.end = EP93XX_UART1_PHYS_BASE + 0x0fff,
.flags = IORESOURCE_MEM,
},
.irq = { IRQ_EP93XX_UART1, NO_IRQ },
.periphid = 0x00041010,
};
static struct amba_device uart2_device = {
.dev = {
.bus_id = "apb:uart2",
.platform_data = &ep93xx_uart_data,
},
.res = {
.start = EP93XX_UART2_PHYS_BASE,
.end = EP93XX_UART2_PHYS_BASE + 0x0fff,
.flags = IORESOURCE_MEM,
},
.irq = { IRQ_EP93XX_UART2, NO_IRQ },
.periphid = 0x00041010,
};
static struct amba_device uart3_device = {
.dev = {
.bus_id = "apb:uart3",
.platform_data = &ep93xx_uart_data,
},
.res = {
.start = EP93XX_UART3_PHYS_BASE,
.end = EP93XX_UART3_PHYS_BASE + 0x0fff,
.flags = IORESOURCE_MEM,
},
.irq = { IRQ_EP93XX_UART3, NO_IRQ },
.periphid = 0x00041010,
};
static struct platform_device ep93xx_rtc_device = {
.name = "ep93xx-rtc",
.id = -1,
.num_resources = 0,
};
static struct resource ep93xx_ohci_resources[] = {
[0] = {
.start = EP93XX_USB_PHYS_BASE,
.end = EP93XX_USB_PHYS_BASE + 0x0fff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_EP93XX_USB,
.end = IRQ_EP93XX_USB,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device ep93xx_ohci_device = {
.name = "ep93xx-ohci",
.id = -1,
.dev = {
.dma_mask = (void *)0xffffffff,
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(ep93xx_ohci_resources),
.resource = ep93xx_ohci_resources,
};
void __init ep93xx_init_devices(void)
{
unsigned int v;
ep93xx_clock_init();
/*
* Disallow access to MaverickCrunch initially.
*/
v = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
v &= ~EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE;
__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
__raw_writel(v, EP93XX_SYSCON_DEVICE_CONFIG);
amba_device_register(&uart1_device, &iomem_resource);
amba_device_register(&uart2_device, &iomem_resource);
amba_device_register(&uart3_device, &iomem_resource);
platform_device_register(&ep93xx_rtc_device);
platform_device_register(&ep93xx_ohci_device);
}