q3k/linux
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
linux/drivers/net/bonding/bond_main.c
Peter Pan(潘卫平) 1c3ac4289a bonding: send igmp report for its master 
Liang Zheng(lzheng@redhat.com) found that in the following topo,
bonding does not send igmp report when we trigger a fail-over of bonding.

eth0--
      |-- bond0 -- br0
eth1--

modprobe bonding mode=1 miimon=100 resend_igmp=10
ifconfig bond0 up
ifenslave bond0 eth0 eth1

brctl addbr br0
ifconfig br0 192.168.100.2/24 up
brctl addif br0 bond0

Add 192.168.100.2(br0) into a multicast group, like 224.10.10.10,
then trigger a fali-over in bonding.
You can see that parameter "resend_igmp" does not work.

The reason is that when we add br0 into a multicast group,
it does not propagate multicast knowledge down to its ports.

If we choose to propagate multicast knowledge down to all ports for bridge,
then we have to track every change that is done to bridge, and keep a backup
for all ports. It is hard to track, I think.

Instead I choose to modify bonding to send igmp report for its master.

Changelog:
V2: correct comments
V3: move this check into bond_resend_igmp_join_requests()
V4: only send igmp reports if bond is enslaved to a bridge

Signed-off-by: Weiping Pan <panweiping3@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19 18:02:05 -04:00

4967 lines
130 KiB
C
Raw Blame History

/*
* originally based on the dummy device.
*
* Copyright 1999, Thomas Davis, tadavis@lbl.gov.
* Licensed under the GPL. Based on dummy.c, and eql.c devices.
*
* bonding.c: an Ethernet Bonding driver
*
* This is useful to talk to a Cisco EtherChannel compatible equipment:
* Cisco 5500
* Sun Trunking (Solaris)
* Alteon AceDirector Trunks
* Linux Bonding
* and probably many L2 switches ...
*
* How it works:
* ifconfig bond0 ipaddress netmask up
* will setup a network device, with an ip address. No mac address
* will be assigned at this time. The hw mac address will come from
* the first slave bonded to the channel. All slaves will then use
* this hw mac address.
*
* ifconfig bond0 down
* will release all slaves, marking them as down.
*
* ifenslave bond0 eth0
* will attach eth0 to bond0 as a slave. eth0 hw mac address will either
* a: be used as initial mac address
* b: if a hw mac address already is there, eth0's hw mac address
* will then be set from bond0.
*
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/fcntl.h>
#include <linux/interrupt.h>
#include <linux/ptrace.h>
#include <linux/ioport.h>
#include <linux/in.h>
#include <net/ip.h>
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/udp.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/timer.h>
#include <linux/socket.h>
#include <linux/ctype.h>
#include <linux/inet.h>
#include <linux/bitops.h>
#include <linux/io.h>
#include <asm/system.h>
#include <asm/dma.h>
#include <linux/uaccess.h>
#include <linux/errno.h>
#include <linux/netdevice.h>
#include <linux/inetdevice.h>
#include <linux/igmp.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <net/sock.h>
#include <linux/rtnetlink.h>
#include <linux/smp.h>
#include <linux/if_ether.h>
#include <net/arp.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/if_vlan.h>
#include <linux/if_bonding.h>
#include <linux/jiffies.h>
#include <linux/preempt.h>
#include <net/route.h>
#include <net/net_namespace.h>
#include <net/netns/generic.h>
#include "bonding.h"
#include "bond_3ad.h"
#include "bond_alb.h"
/*---------------------------- Module parameters ----------------------------*/
/* monitor all links that often (in milliseconds). <=0 disables monitoring */
#define BOND_LINK_MON_INTERV 0
#define BOND_LINK_ARP_INTERV 0
static int max_bonds = BOND_DEFAULT_MAX_BONDS;
static int tx_queues = BOND_DEFAULT_TX_QUEUES;
static int num_peer_notif = 1;
static int miimon = BOND_LINK_MON_INTERV;
static int updelay;
static int downdelay;
static int use_carrier = 1;
static char *mode;
static char *primary;
static char *primary_reselect;
static char *lacp_rate;
static int min_links;
static char *ad_select;
static char *xmit_hash_policy;
static int arp_interval = BOND_LINK_ARP_INTERV;
static char *arp_ip_target[BOND_MAX_ARP_TARGETS];
static char *arp_validate;
static char *fail_over_mac;
static int all_slaves_active = 0;
static struct bond_params bonding_defaults;
static int resend_igmp = BOND_DEFAULT_RESEND_IGMP;
module_param(max_bonds, int, 0);
MODULE_PARM_DESC(max_bonds, "Max number of bonded devices");
module_param(tx_queues, int, 0);
MODULE_PARM_DESC(tx_queues, "Max number of transmit queues (default = 16)");
module_param_named(num_grat_arp, num_peer_notif, int, 0644);
MODULE_PARM_DESC(num_grat_arp, "Number of peer notifications to send on "
"failover event (alias of num_unsol_na)");
module_param_named(num_unsol_na, num_peer_notif, int, 0644);
MODULE_PARM_DESC(num_unsol_na, "Number of peer notifications to send on "
"failover event (alias of num_grat_arp)");
module_param(miimon, int, 0);
MODULE_PARM_DESC(miimon, "Link check interval in milliseconds");
module_param(updelay, int, 0);
MODULE_PARM_DESC(updelay, "Delay before considering link up, in milliseconds");
module_param(downdelay, int, 0);
MODULE_PARM_DESC(downdelay, "Delay before considering link down, "
"in milliseconds");
module_param(use_carrier, int, 0);
MODULE_PARM_DESC(use_carrier, "Use netif_carrier_ok (vs MII ioctls) in miimon; "
"0 for off, 1 for on (default)");
module_param(mode, charp, 0);
MODULE_PARM_DESC(mode, "Mode of operation; 0 for balance-rr, "
"1 for active-backup, 2 for balance-xor, "
"3 for broadcast, 4 for 802.3ad, 5 for balance-tlb, "
"6 for balance-alb");
module_param(primary, charp, 0);
MODULE_PARM_DESC(primary, "Primary network device to use");
module_param(primary_reselect, charp, 0);
MODULE_PARM_DESC(primary_reselect, "Reselect primary slave "
"once it comes up; "
"0 for always (default), "
"1 for only if speed of primary is "
"better, "
"2 for only on active slave "
"failure");
module_param(lacp_rate, charp, 0);
MODULE_PARM_DESC(lacp_rate, "LACPDU tx rate to request from 802.3ad partner; "
"0 for slow, 1 for fast");
module_param(ad_select, charp, 0);
MODULE_PARM_DESC(ad_select, "803.ad aggregation selection logic; "
"0 for stable (default), 1 for bandwidth, "
"2 for count");
module_param(min_links, int, 0);
MODULE_PARM_DESC(min_links, "Minimum number of available links before turning on carrier");
module_param(xmit_hash_policy, charp, 0);
MODULE_PARM_DESC(xmit_hash_policy, "balance-xor and 802.3ad hashing method; "
"0 for layer 2 (default), 1 for layer 3+4, "
"2 for layer 2+3");
module_param(arp_interval, int, 0);
MODULE_PARM_DESC(arp_interval, "arp interval in milliseconds");
module_param_array(arp_ip_target, charp, NULL, 0);
MODULE_PARM_DESC(arp_ip_target, "arp targets in n.n.n.n form");
module_param(arp_validate, charp, 0);
MODULE_PARM_DESC(arp_validate, "validate src/dst of ARP probes; "
"0 for none (default), 1 for active, "
"2 for backup, 3 for all");
module_param(fail_over_mac, charp, 0);
MODULE_PARM_DESC(fail_over_mac, "For active-backup, do not set all slaves to "
"the same MAC; 0 for none (default), "
"1 for active, 2 for follow");
module_param(all_slaves_active, int, 0);
MODULE_PARM_DESC(all_slaves_active, "Keep all frames received on an interface"
"by setting active flag for all slaves; "
"0 for never (default), 1 for always.");
module_param(resend_igmp, int, 0);
MODULE_PARM_DESC(resend_igmp, "Number of IGMP membership reports to send on "
"link failure");
/*----------------------------- Global variables ----------------------------*/
#ifdef CONFIG_NET_POLL_CONTROLLER
atomic_t netpoll_block_tx = ATOMIC_INIT(0);
#endif
int bond_net_id __read_mostly;
static __be32 arp_target[BOND_MAX_ARP_TARGETS];
static int arp_ip_count;
static int bond_mode = BOND_MODE_ROUNDROBIN;
static int xmit_hashtype = BOND_XMIT_POLICY_LAYER2;
static int lacp_fast;
const struct bond_parm_tbl bond_lacp_tbl[] = {
{ "slow", AD_LACP_SLOW},
{ "fast", AD_LACP_FAST},
{ NULL, -1},
};
const struct bond_parm_tbl bond_mode_tbl[] = {
{ "balance-rr", BOND_MODE_ROUNDROBIN},
{ "active-backup", BOND_MODE_ACTIVEBACKUP},
{ "balance-xor", BOND_MODE_XOR},
{ "broadcast", BOND_MODE_BROADCAST},
{ "802.3ad", BOND_MODE_8023AD},
{ "balance-tlb", BOND_MODE_TLB},
{ "balance-alb", BOND_MODE_ALB},
{ NULL, -1},
};
const struct bond_parm_tbl xmit_hashtype_tbl[] = {
{ "layer2", BOND_XMIT_POLICY_LAYER2},
{ "layer3+4", BOND_XMIT_POLICY_LAYER34},
{ "layer2+3", BOND_XMIT_POLICY_LAYER23},
{ NULL, -1},
};
const struct bond_parm_tbl arp_validate_tbl[] = {
{ "none", BOND_ARP_VALIDATE_NONE},
{ "active", BOND_ARP_VALIDATE_ACTIVE},
{ "backup", BOND_ARP_VALIDATE_BACKUP},
{ "all", BOND_ARP_VALIDATE_ALL},
{ NULL, -1},
};
const struct bond_parm_tbl fail_over_mac_tbl[] = {
{ "none", BOND_FOM_NONE},
{ "active", BOND_FOM_ACTIVE},
{ "follow", BOND_FOM_FOLLOW},
{ NULL, -1},
};
const struct bond_parm_tbl pri_reselect_tbl[] = {
{ "always", BOND_PRI_RESELECT_ALWAYS},
{ "better", BOND_PRI_RESELECT_BETTER},
{ "failure", BOND_PRI_RESELECT_FAILURE},
{ NULL, -1},
};
struct bond_parm_tbl ad_select_tbl[] = {
{ "stable", BOND_AD_STABLE},
{ "bandwidth", BOND_AD_BANDWIDTH},
{ "count", BOND_AD_COUNT},
{ NULL, -1},
};
/*-------------------------- Forward declarations ---------------------------*/
static int bond_init(struct net_device *bond_dev);
static void bond_uninit(struct net_device *bond_dev);
/*---------------------------- General routines -----------------------------*/
const char *bond_mode_name(int mode)
{
static const char *names[] = {
[BOND_MODE_ROUNDROBIN] = "load balancing (round-robin)",
[BOND_MODE_ACTIVEBACKUP] = "fault-tolerance (active-backup)",
[BOND_MODE_XOR] = "load balancing (xor)",
[BOND_MODE_BROADCAST] = "fault-tolerance (broadcast)",
[BOND_MODE_8023AD] = "IEEE 802.3ad Dynamic link aggregation",
[BOND_MODE_TLB] = "transmit load balancing",
[BOND_MODE_ALB] = "adaptive load balancing",
};
if (mode < 0 || mode > BOND_MODE_ALB)
return "unknown";
return names[mode];
}
/*---------------------------------- VLAN -----------------------------------*/
/**
* bond_add_vlan - add a new vlan id on bond
* @bond: bond that got the notification
* @vlan_id: the vlan id to add
*
* Returns -ENOMEM if allocation failed.
*/
static int bond_add_vlan(struct bonding *bond, unsigned short vlan_id)
{
struct vlan_entry *vlan;
pr_debug("bond: %s, vlan id %d\n",
(bond ? bond->dev->name : "None"), vlan_id);
vlan = kzalloc(sizeof(struct vlan_entry), GFP_KERNEL);
if (!vlan)
return -ENOMEM;
INIT_LIST_HEAD(&vlan->vlan_list);
vlan->vlan_id = vlan_id;
write_lock_bh(&bond->lock);
list_add_tail(&vlan->vlan_list, &bond->vlan_list);
write_unlock_bh(&bond->lock);
pr_debug("added VLAN ID %d on bond %s\n", vlan_id, bond->dev->name);
return 0;
}
/**
* bond_del_vlan - delete a vlan id from bond
* @bond: bond that got the notification
* @vlan_id: the vlan id to delete
*
* returns -ENODEV if @vlan_id was not found in @bond.
*/
static int bond_del_vlan(struct bonding *bond, unsigned short vlan_id)
{
struct vlan_entry *vlan;
int res = -ENODEV;
pr_debug("bond: %s, vlan id %d\n", bond->dev->name, vlan_id);
block_netpoll_tx();
write_lock_bh(&bond->lock);
list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
if (vlan->vlan_id == vlan_id) {
list_del(&vlan->vlan_list);
if (bond_is_lb(bond))
bond_alb_clear_vlan(bond, vlan_id);
pr_debug("removed VLAN ID %d from bond %s\n",
vlan_id, bond->dev->name);
kfree(vlan);
res = 0;
goto out;
}
}
pr_debug("couldn't find VLAN ID %d in bond %s\n",
vlan_id, bond->dev->name);
out:
write_unlock_bh(&bond->lock);
unblock_netpoll_tx();
return res;
}
/**
* bond_next_vlan - safely skip to the next item in the vlans list.
* @bond: the bond we're working on
* @curr: item we're advancing from
*
* Returns %NULL if list is empty, bond->next_vlan if @curr is %NULL,
* or @curr->next otherwise (even if it is @curr itself again).
*
* Caller must hold bond->lock
*/
struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr)
{
struct vlan_entry *next, *last;
if (list_empty(&bond->vlan_list))
return NULL;
if (!curr) {
next = list_entry(bond->vlan_list.next,
struct vlan_entry, vlan_list);
} else {
last = list_entry(bond->vlan_list.prev,
struct vlan_entry, vlan_list);
if (last == curr) {
next = list_entry(bond->vlan_list.next,
struct vlan_entry, vlan_list);
} else {
next = list_entry(curr->vlan_list.next,
struct vlan_entry, vlan_list);
}
}
return next;
}
#define bond_queue_mapping(skb) (*(u16 *)((skb)->cb))
/**
* bond_dev_queue_xmit - Prepare skb for xmit.
*
* @bond: bond device that got this skb for tx.
* @skb: hw accel VLAN tagged skb to transmit
* @slave_dev: slave that is supposed to xmit this skbuff
*/
int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb,
struct net_device *slave_dev)
{
skb->dev = slave_dev;
skb->queue_mapping = bond_queue_mapping(skb);
if (unlikely(netpoll_tx_running(slave_dev)))
bond_netpoll_send_skb(bond_get_slave_by_dev(bond, slave_dev), skb);
else
dev_queue_xmit(skb);
return 0;
}
/*
* In the following 2 functions, bond_vlan_rx_add_vid and bond_vlan_rx_kill_vid,
* We don't protect the slave list iteration with a lock because:
* a. This operation is performed in IOCTL context,
* b. The operation is protected by the RTNL semaphore in the 8021q code,
* c. Holding a lock with BH disabled while directly calling a base driver
* entry point is generally a BAD idea.
*
* The design of synchronization/protection for this operation in the 8021q
* module is good for one or more VLAN devices over a single physical device
* and cannot be extended for a teaming solution like bonding, so there is a
* potential race condition here where a net device from the vlan group might
* be referenced (either by a base driver or the 8021q code) while it is being
* removed from the system. However, it turns out we're not making matters
* worse, and if it works for regular VLAN usage it will work here too.
*/
/**
* bond_vlan_rx_add_vid - Propagates adding an id to slaves
* @bond_dev: bonding net device that got called
* @vid: vlan id being added
*/
static int bond_vlan_rx_add_vid(struct net_device *bond_dev, uint16_t vid)
{
struct bonding *bond = netdev_priv(bond_dev);
struct slave *slave, *stop_at;
int i, res;
bond_for_each_slave(bond, slave, i) {
res = vlan_vid_add(slave->dev, vid);
if (res)
goto unwind;
}
res = bond_add_vlan(bond, vid);
if (res) {
pr_err("%s: Error: Failed to add vlan id %d\n",
bond_dev->name, vid);
return res;
}
return 0;
unwind:
/* unwind from head to the slave that failed */
stop_at = slave;
bond_for_each_slave_from_to(bond, slave, i, bond->first_slave, stop_at)
vlan_vid_del(slave->dev, vid);
return res;
}
/**
* bond_vlan_rx_kill_vid - Propagates deleting an id to slaves
* @bond_dev: bonding net device that got called
* @vid: vlan id being removed
*/
static int bond_vlan_rx_kill_vid(struct net_device *bond_dev, uint16_t vid)
{
struct bonding *bond = netdev_priv(bond_dev);
struct slave *slave;
int i, res;
bond_for_each_slave(bond, slave, i)
vlan_vid_del(slave->dev, vid);
res = bond_del_vlan(bond, vid);
if (res) {
pr_err("%s: Error: Failed to remove vlan id %d\n",
bond_dev->name, vid);
return res;
}
return 0;
}
static void bond_add_vlans_on_slave(struct bonding *bond, struct net_device *slave_dev)
{
struct vlan_entry *vlan;
int res;
list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
res = vlan_vid_add(slave_dev, vlan->vlan_id);
if (res)
pr_warning("%s: Failed to add vlan id %d to device %s\n",
bond->dev->name, vlan->vlan_id,
slave_dev->name);
}
}
static void bond_del_vlans_from_slave(struct bonding *bond,
struct net_device *slave_dev)
{
struct vlan_entry *vlan;
list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
if (!vlan->vlan_id)
continue;
vlan_vid_del(slave_dev, vlan->vlan_id);
}
}
/*------------------------------- Link status -------------------------------*/
/*
* Set the carrier state for the master according to the state of its
* slaves. If any slaves are up, the master is up. In 802.3ad mode,
* do special 802.3ad magic.
*
* Returns zero if carrier state does not change, nonzero if it does.
*/
static int bond_set_carrier(struct bonding *bond)
{
struct slave *slave;
int i;
if (bond->slave_cnt == 0)
goto down;
if (bond->params.mode == BOND_MODE_8023AD)
return bond_3ad_set_carrier(bond);
bond_for_each_slave(bond, slave, i) {
if (slave->link == BOND_LINK_UP) {
if (!netif_carrier_ok(bond->dev)) {
netif_carrier_on(bond->dev);
return 1;
}
return 0;
}
}
down:
if (netif_carrier_ok(bond->dev)) {
netif_carrier_off(bond->dev);
return 1;
}
return 0;
}
/*
* Get link speed and duplex from the slave's base driver
* using ethtool. If for some reason the call fails or the
* values are invalid, set speed and duplex to -1,
* and return error.
*/
static int bond_update_speed_duplex(struct slave *slave)
{
struct net_device *slave_dev = slave->dev;
struct ethtool_cmd ecmd;
u32 slave_speed;
int res;
slave->speed = SPEED_UNKNOWN;
slave->duplex = DUPLEX_UNKNOWN;
res = __ethtool_get_settings(slave_dev, &ecmd);
if (res < 0)
return -1;
slave_speed = ethtool_cmd_speed(&ecmd);
if (slave_speed == 0 || slave_speed == ((__u32) -1))
return -1;
switch (ecmd.duplex) {
case DUPLEX_FULL:
case DUPLEX_HALF:
break;
default:
return -1;
}
slave->speed = slave_speed;
slave->duplex = ecmd.duplex;
return 0;
}
/*
* if <dev> supports MII link status reporting, check its link status.
*
* We either do MII/ETHTOOL ioctls, or check netif_carrier_ok(),
* depending upon the setting of the use_carrier parameter.
*
* Return either BMSR_LSTATUS, meaning that the link is up (or we
* can't tell and just pretend it is), or 0, meaning that the link is
* down.
*
* If reporting is non-zero, instead of faking link up, return -1 if
* both ETHTOOL and MII ioctls fail (meaning the device does not
* support them). If use_carrier is set, return whatever it says.
* It'd be nice if there was a good way to tell if a driver supports
* netif_carrier, but there really isn't.
*/
static int bond_check_dev_link(struct bonding *bond,
struct net_device *slave_dev, int reporting)
{
const struct net_device_ops *slave_ops = slave_dev->netdev_ops;
int (*ioctl)(struct net_device *, struct ifreq *, int);
struct ifreq ifr;
struct mii_ioctl_data *mii;
if (!reporting && !netif_running(slave_dev))
return 0;
if (bond->params.use_carrier)
return netif_carrier_ok(slave_dev) ? BMSR_LSTATUS : 0;
/* Try to get link status using Ethtool first. */
if (slave_dev->ethtool_ops) {
if (slave_dev->ethtool_ops->get_link) {
u32 link;
link = slave_dev->ethtool_ops->get_link(slave_dev);
return link ? BMSR_LSTATUS : 0;
}
}
/* Ethtool can't be used, fallback to MII ioctls. */
ioctl = slave_ops->ndo_do_ioctl;
if (ioctl) {
/* TODO: set pointer to correct ioctl on a per team member */
/* bases to make this more efficient. that is, once */
/* we determine the correct ioctl, we will always */
/* call it and not the others for that team */
/* member. */
/*
* We cannot assume that SIOCGMIIPHY will also read a
* register; not all network drivers (e.g., e100)
* support that.
*/
/* Yes, the mii is overlaid on the ifreq.ifr_ifru */
strncpy(ifr.ifr_name, slave_dev->name, IFNAMSIZ);
mii = if_mii(&ifr);
if (IOCTL(slave_dev, &ifr, SIOCGMIIPHY) == 0) {
mii->reg_num = MII_BMSR;
if (IOCTL(slave_dev, &ifr, SIOCGMIIREG) == 0)
return mii->val_out & BMSR_LSTATUS;
}
}
/*
* If reporting, report that either there's no dev->do_ioctl,
* or both SIOCGMIIREG and get_link failed (meaning that we
* cannot report link status). If not reporting, pretend
* we're ok.
*/
return reporting ? -1 : BMSR_LSTATUS;
}
/*----------------------------- Multicast list ------------------------------*/
/*
* Push the promiscuity flag down to appropriate slaves
*/
static int bond_set_promiscuity(struct bonding *bond, int inc)
{
int err = 0;
if (USES_PRIMARY(bond->params.mode)) {
/* write lock already acquired */
if (bond->curr_active_slave) {
err = dev_set_promiscuity(bond->curr_active_slave->dev,
inc);
}
} else {
struct slave *slave;
int i;
bond_for_each_slave(bond, slave, i) {
err = dev_set_promiscuity(slave->dev, inc);
if (err)
return err;
}
}
return err;
}
/*
* Push the allmulti flag down to all slaves
*/
static int bond_set_allmulti(struct bonding *bond, int inc)
{
int err = 0;
if (USES_PRIMARY(bond->params.mode)) {
/* write lock already acquired */
if (bond->curr_active_slave) {
err = dev_set_allmulti(bond->curr_active_slave->dev,
inc);
}
} else {
struct slave *slave;
int i;
bond_for_each_slave(bond, slave, i) {
err = dev_set_allmulti(slave->dev, inc);
if (err)
return err;
}
}
return err;
}
/*
* Add a Multicast address to slaves
* according to mode
*/
static void bond_mc_add(struct bonding *bond, void *addr)
{
if (USES_PRIMARY(bond->params.mode)) {
/* write lock already acquired */
if (bond->curr_active_slave)
dev_mc_add(bond->curr_active_slave->dev, addr);
} else {
struct slave *slave;
int i;
bond_for_each_slave(bond, slave, i)
dev_mc_add(slave->dev, addr);
}
}
/*
* Remove a multicast address from slave
* according to mode
*/
static void bond_mc_del(struct bonding *bond, void *addr)
{
if (USES_PRIMARY(bond->params.mode)) {
/* write lock already acquired */
if (bond->curr_active_slave)
dev_mc_del(bond->curr_active_slave->dev, addr);
} else {
struct slave *slave;
int i;
bond_for_each_slave(bond, slave, i) {
dev_mc_del(slave->dev, addr);
}
}
}
static void __bond_resend_igmp_join_requests(struct net_device *dev)
{
struct in_device *in_dev;
rcu_read_lock();
in_dev = __in_dev_get_rcu(dev);
if (in_dev)
ip_mc_rejoin_groups(in_dev);
rcu_read_unlock();
}
/*
* Retrieve the list of registered multicast addresses for the bonding
* device and retransmit an IGMP JOIN request to the current active
* slave.
*/
static void bond_resend_igmp_join_requests(struct bonding *bond)
{
struct net_device *bond_dev, *vlan_dev, *master_dev;
struct vlan_entry *vlan;
read_lock(&bond->lock);
bond_dev = bond->dev;
/* rejoin all groups on bond device */
__bond_resend_igmp_join_requests(bond_dev);
/*
* if bond is enslaved to a bridge,
* then rejoin all groups on its master
*/
master_dev = bond_dev->master;
if (master_dev)
if ((master_dev->priv_flags & IFF_EBRIDGE)
&& (bond_dev->priv_flags & IFF_BRIDGE_PORT))
__bond_resend_igmp_join_requests(master_dev);
/* rejoin all groups on vlan devices */
list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
rcu_read_lock();
vlan_dev = __vlan_find_dev_deep(bond_dev,
vlan->vlan_id);
rcu_read_unlock();
if (vlan_dev)
__bond_resend_igmp_join_requests(vlan_dev);
}
if (--bond->igmp_retrans > 0)
queue_delayed_work(bond->wq, &bond->mcast_work, HZ/5);
read_unlock(&bond->lock);
}
static void bond_resend_igmp_join_requests_delayed(struct work_struct *work)
{
struct bonding *bond = container_of(work, struct bonding,
mcast_work.work);
bond_resend_igmp_join_requests(bond);
}
/*
* flush all members of flush->mc_list from device dev->mc_list
*/
static void bond_mc_list_flush(struct net_device *bond_dev,
struct net_device *slave_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
struct netdev_hw_addr *ha;
netdev_for_each_mc_addr(ha, bond_dev)
dev_mc_del(slave_dev, ha->addr);
if (bond->params.mode == BOND_MODE_8023AD) {
/* del lacpdu mc addr from mc list */
u8 lacpdu_multicast[ETH_ALEN] = MULTICAST_LACPDU_ADDR;
dev_mc_del(slave_dev, lacpdu_multicast);
}
}
/*--------------------------- Active slave change ---------------------------*/
/*
* Update the mc list and multicast-related flags for the new and
* old active slaves (if any) according to the multicast mode, and
* promiscuous flags unconditionally.
*/
static void bond_mc_swap(struct bonding *bond, struct slave *new_active,
struct slave *old_active)
{
struct netdev_hw_addr *ha;
if (!USES_PRIMARY(bond->params.mode))
/* nothing to do - mc list is already up-to-date on
* all slaves
*/
return;
if (old_active) {
if (bond->dev->flags & IFF_PROMISC)
dev_set_promiscuity(old_active->dev, -1);
if (bond->dev->flags & IFF_ALLMULTI)
dev_set_allmulti(old_active->dev, -1);
netdev_for_each_mc_addr(ha, bond->dev)
dev_mc_del(old_active->dev, ha->addr);
}
if (new_active) {
/* FIXME: Signal errors upstream. */
if (bond->dev->flags & IFF_PROMISC)
dev_set_promiscuity(new_active->dev, 1);
if (bond->dev->flags & IFF_ALLMULTI)
dev_set_allmulti(new_active->dev, 1);
netdev_for_each_mc_addr(ha, bond->dev)
dev_mc_add(new_active->dev, ha->addr);
}
}
/*
* bond_do_fail_over_mac
*
* Perform special MAC address swapping for fail_over_mac settings
*
* Called with RTNL, bond->lock for read, curr_slave_lock for write_bh.
*/
static void bond_do_fail_over_mac(struct bonding *bond,
struct slave *new_active,
struct slave *old_active)
__releases(&bond->curr_slave_lock)
__releases(&bond->lock)
__acquires(&bond->lock)
__acquires(&bond->curr_slave_lock)
{
u8 tmp_mac[ETH_ALEN];
struct sockaddr saddr;
int rv;
switch (bond->params.fail_over_mac) {
case BOND_FOM_ACTIVE:
if (new_active)
memcpy(bond->dev->dev_addr, new_active->dev->dev_addr,
new_active->dev->addr_len);
break;
case BOND_FOM_FOLLOW:
/*
* if new_active && old_active, swap them
* if just old_active, do nothing (going to no active slave)
* if just new_active, set new_active to bond's MAC
*/
if (!new_active)
return;
write_unlock_bh(&bond->curr_slave_lock);
read_unlock(&bond->lock);
if (old_active) {
memcpy(tmp_mac, new_active->dev->dev_addr, ETH_ALEN);
memcpy(saddr.sa_data, old_active->dev->dev_addr,
ETH_ALEN);
saddr.sa_family = new_active->dev->type;
} else {
memcpy(saddr.sa_data, bond->dev->dev_addr, ETH_ALEN);
saddr.sa_family = bond->dev->type;
}
rv = dev_set_mac_address(new_active->dev, &saddr);
if (rv) {
pr_err("%s: Error %d setting MAC of slave %s\n",
bond->dev->name, -rv, new_active->dev->name);
goto out;
}
if (!old_active)
goto out;
memcpy(saddr.sa_data, tmp_mac, ETH_ALEN);
saddr.sa_family = old_active->dev->type;
rv = dev_set_mac_address(old_active->dev, &saddr);
if (rv)
pr_err("%s: Error %d setting MAC of slave %s\n",
bond->dev->name, -rv, new_active->dev->name);
out:
read_lock(&bond->lock);
write_lock_bh(&bond->curr_slave_lock);
break;
default:
pr_err("%s: bond_do_fail_over_mac impossible: bad policy %d\n",
bond->dev->name, bond->params.fail_over_mac);
break;
}
}
static bool bond_should_change_active(struct bonding *bond)
{
struct slave *prim = bond->primary_slave;
struct slave *curr = bond->curr_active_slave;
if (!prim || !curr || curr->link != BOND_LINK_UP)
return true;
if (bond->force_primary) {
bond->force_primary = false;
return true;
}
if (bond->params.primary_reselect == BOND_PRI_RESELECT_BETTER &&
(prim->speed < curr->speed ||
(prim->speed == curr->speed && prim->duplex <= curr->duplex)))
return false;
if (bond->params.primary_reselect == BOND_PRI_RESELECT_FAILURE)
return false;
return true;
}
/**
* find_best_interface - select the best available slave to be the active one
* @bond: our bonding struct
*
* Warning: Caller must hold curr_slave_lock for writing.
*/
static struct slave *bond_find_best_slave(struct bonding *bond)
{
struct slave *new_active, *old_active;
struct slave *bestslave = NULL;
int mintime = bond->params.updelay;
int i;
new_active = bond->curr_active_slave;
if (!new_active) { /* there were no active slaves left */
if (bond->slave_cnt > 0) /* found one slave */
new_active = bond->first_slave;
else
return NULL; /* still no slave, return NULL */
}
if ((bond->primary_slave) &&
bond->primary_slave->link == BOND_LINK_UP &&
bond_should_change_active(bond)) {
new_active = bond->primary_slave;
}
/* remember where to stop iterating over the slaves */
old_active = new_active;
bond_for_each_slave_from(bond, new_active, i, old_active) {
if (new_active->link == BOND_LINK_UP) {
return new_active;
} else if (new_active->link == BOND_LINK_BACK &&
IS_UP(new_active->dev)) {
/* link up, but waiting for stabilization */
if (new_active->delay < mintime) {
mintime = new_active->delay;
bestslave = new_active;
}
}
}
return bestslave;
}
static bool bond_should_notify_peers(struct bonding *bond)
{
struct slave *slave = bond->curr_active_slave;
pr_debug("bond_should_notify_peers: bond %s slave %s\n",
bond->dev->name, slave ? slave->dev->name : "NULL");
if (!slave || !bond->send_peer_notif ||
test_bit(__LINK_STATE_LINKWATCH_PENDING, &slave->dev->state))
return false;
bond->send_peer_notif--;
return true;
}
/**
* change_active_interface - change the active slave into the specified one
* @bond: our bonding struct
* @new: the new slave to make the active one
*
* Set the new slave to the bond's settings and unset them on the old
* curr_active_slave.
* Setting include flags, mc-list, promiscuity, allmulti, etc.
*
* If @new's link state is %BOND_LINK_BACK we'll set it to %BOND_LINK_UP,
* because it is apparently the best available slave we have, even though its
* updelay hasn't timed out yet.
*
* If new_active is not NULL, caller must hold bond->lock for read and
* curr_slave_lock for write_bh.
*/
void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
{
struct slave *old_active = bond->curr_active_slave;
if (old_active == new_active)
return;
if (new_active) {
new_active->jiffies = jiffies;
if (new_active->link == BOND_LINK_BACK) {
if (USES_PRIMARY(bond->params.mode)) {
pr_info("%s: making interface %s the new active one %d ms earlier.\n",
bond->dev->name, new_active->dev->name,
(bond->params.updelay - new_active->delay) * bond->params.miimon);
}
new_active->delay = 0;
new_active->link = BOND_LINK_UP;
if (bond->params.mode == BOND_MODE_8023AD)
bond_3ad_handle_link_change(new_active, BOND_LINK_UP);
if (bond_is_lb(bond))
bond_alb_handle_link_change(bond, new_active, BOND_LINK_UP);
} else {
if (USES_PRIMARY(bond->params.mode)) {
pr_info("%s: making interface %s the new active one.\n",
bond->dev->name, new_active->dev->name);
}
}
}
if (USES_PRIMARY(bond->params.mode))
bond_mc_swap(bond, new_active, old_active);
if (bond_is_lb(bond)) {
bond_alb_handle_active_change(bond, new_active);
if (old_active)
bond_set_slave_inactive_flags(old_active);
if (new_active)
bond_set_slave_active_flags(new_active);
} else {
bond->curr_active_slave = new_active;
}
if (bond->params.mode == BOND_MODE_ACTIVEBACKUP) {
if (old_active)
bond_set_slave_inactive_flags(old_active);
if (new_active) {
bool should_notify_peers = false;
bond_set_slave_active_flags(new_active);
if (bond->params.fail_over_mac)
bond_do_fail_over_mac(bond, new_active,
old_active);
if (netif_running(bond->dev)) {
bond->send_peer_notif =
bond->params.num_peer_notif;
should_notify_peers =
bond_should_notify_peers(bond);
}
write_unlock_bh(&bond->curr_slave_lock);
read_unlock(&bond->lock);
netdev_bonding_change(bond->dev, NETDEV_BONDING_FAILOVER);
if (should_notify_peers)
netdev_bonding_change(bond->dev,
NETDEV_NOTIFY_PEERS);
read_lock(&bond->lock);
write_lock_bh(&bond->curr_slave_lock);
}
}
/* resend IGMP joins since active slave has changed or
* all were sent on curr_active_slave.
* resend only if bond is brought up with the affected
* bonding modes and the retransmission is enabled */
if (netif_running(bond->dev) && (bond->params.resend_igmp > 0) &&
((USES_PRIMARY(bond->params.mode) && new_active) ||
bond->params.mode == BOND_MODE_ROUNDROBIN)) {
bond->igmp_retrans = bond->params.resend_igmp;
queue_delayed_work(bond->wq, &bond->mcast_work, 0);
}
}
/**
* bond_select_active_slave - select a new active slave, if needed
* @bond: our bonding struct
*
* This functions should be called when one of the following occurs:
* - The old curr_active_slave has been released or lost its link.
* - The primary_slave has got its link back.
* - A slave has got its link back and there's no old curr_active_slave.
*
* Caller must hold bond->lock for read and curr_slave_lock for write_bh.
*/
void bond_select_active_slave(struct bonding *bond)
{
struct slave *best_slave;
int rv;
best_slave = bond_find_best_slave(bond);
if (best_slave != bond->curr_active_slave) {
bond_change_active_slave(bond, best_slave);
rv = bond_set_carrier(bond);
if (!rv)
return;
if (netif_carrier_ok(bond->dev)) {
pr_info("%s: first active interface up!\n",
bond->dev->name);
} else {
pr_info("%s: now running without any active interface !\n",
bond->dev->name);
}
}
}
/*--------------------------- slave list handling ---------------------------*/
/*
* This function attaches the slave to the end of list.
*
* bond->lock held for writing by caller.
*/
static void bond_attach_slave(struct bonding *bond, struct slave *new_slave)
{
if (bond->first_slave == NULL) { /* attaching the first slave */
new_slave->next = new_slave;
new_slave->prev = new_slave;
bond->first_slave = new_slave;
} else {
new_slave->next = bond->first_slave;
new_slave->prev = bond->first_slave->prev;
new_slave->next->prev = new_slave;
new_slave->prev->next = new_slave;
}
bond->slave_cnt++;
}
/*
* This function detaches the slave from the list.
* WARNING: no check is made to verify if the slave effectively
* belongs to <bond>.
* Nothing is freed on return, structures are just unchained.
* If any slave pointer in bond was pointing to <slave>,
* it should be changed by the calling function.
*
* bond->lock held for writing by caller.
*/
static void bond_detach_slave(struct bonding *bond, struct slave *slave)
{
if (slave->next)
slave->next->prev = slave->prev;
if (slave->prev)
slave->prev->next = slave->next;
if (bond->first_slave == slave) { /* slave is the first slave */
if (bond->slave_cnt > 1) { /* there are more slave */
bond->first_slave = slave->next;
} else {
bond->first_slave = NULL; /* slave was the last one */
}
}
slave->next = NULL;
slave->prev = NULL;
bond->slave_cnt--;
}
#ifdef CONFIG_NET_POLL_CONTROLLER
static inline int slave_enable_netpoll(struct slave *slave)
{
struct netpoll *np;
int err = 0;
np = kzalloc(sizeof(*np), GFP_KERNEL);
err = -ENOMEM;
if (!np)
goto out;
np->dev = slave->dev;
strlcpy(np->dev_name, slave->dev->name, IFNAMSIZ);
err = __netpoll_setup(np);
if (err) {
kfree(np);
goto out;
}
slave->np = np;
out:
return err;
}
static inline void slave_disable_netpoll(struct slave *slave)
{
struct netpoll *np = slave->np;
if (!np)
return;
slave->np = NULL;
synchronize_rcu_bh();
__netpoll_cleanup(np);
kfree(np);
}
static inline bool slave_dev_support_netpoll(struct net_device *slave_dev)
{
if (slave_dev->priv_flags & IFF_DISABLE_NETPOLL)
return false;
if (!slave_dev->netdev_ops->ndo_poll_controller)
return false;
return true;
}
static void bond_poll_controller(struct net_device *bond_dev)
{
}
static void __bond_netpoll_cleanup(struct bonding *bond)
{
struct slave *slave;
int i;
bond_for_each_slave(bond, slave, i)
if (IS_UP(slave->dev))
slave_disable_netpoll(slave);
}
static void bond_netpoll_cleanup(struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
read_lock(&bond->lock);
__bond_netpoll_cleanup(bond);
read_unlock(&bond->lock);
}
static int bond_netpoll_setup(struct net_device *dev, struct netpoll_info *ni)
{
struct bonding *bond = netdev_priv(dev);
struct slave *slave;
int i, err = 0;
read_lock(&bond->lock);
bond_for_each_slave(bond, slave, i) {
err = slave_enable_netpoll(slave);
if (err) {
__bond_netpoll_cleanup(bond);
break;
}
}
read_unlock(&bond->lock);
return err;
}
static struct netpoll_info *bond_netpoll_info(struct bonding *bond)
{
return bond->dev->npinfo;
}
#else
static inline int slave_enable_netpoll(struct slave *slave)
{
return 0;
}
static inline void slave_disable_netpoll(struct slave *slave)
{
}
static void bond_netpoll_cleanup(struct net_device *bond_dev)
{
}
#endif
/*---------------------------------- IOCTL ----------------------------------*/
static int bond_sethwaddr(struct net_device *bond_dev,
struct net_device *slave_dev)
{
pr_debug("bond_dev=%p\n", bond_dev);
pr_debug("slave_dev=%p\n", slave_dev);
pr_debug("slave_dev->addr_len=%d\n", slave_dev->addr_len);
memcpy(bond_dev->dev_addr, slave_dev->dev_addr, slave_dev->addr_len);
return 0;
}
static netdev_features_t bond_fix_features(struct net_device *dev,
netdev_features_t features)
{
struct slave *slave;
struct bonding *bond = netdev_priv(dev);
netdev_features_t mask;
int i;
read_lock(&bond->lock);
if (!bond->first_slave) {
/* Disable adding VLANs to empty bond. But why? --mq */
features |= NETIF_F_VLAN_CHALLENGED;
goto out;
}
mask = features;
features &= ~NETIF_F_ONE_FOR_ALL;
features |= NETIF_F_ALL_FOR_ALL;
bond_for_each_slave(bond, slave, i) {
features = netdev_increment_features(features,
slave->dev->features,
mask);
}
out:
read_unlock(&bond->lock);
return features;
}
#define BOND_VLAN_FEATURES (NETIF_F_ALL_CSUM | NETIF_F_SG | \
NETIF_F_FRAGLIST | NETIF_F_ALL_TSO | \
NETIF_F_HIGHDMA | NETIF_F_LRO)
static void bond_compute_features(struct bonding *bond)
{
struct slave *slave;
struct net_device *bond_dev = bond->dev;
netdev_features_t vlan_features = BOND_VLAN_FEATURES;
unsigned short max_hard_header_len = ETH_HLEN;
int i;
read_lock(&bond->lock);
if (!bond->first_slave)
goto done;
bond_for_each_slave(bond, slave, i) {
vlan_features = netdev_increment_features(vlan_features,
slave->dev->vlan_features, BOND_VLAN_FEATURES);
if (slave->dev->hard_header_len > max_hard_header_len)
max_hard_header_len = slave->dev->hard_header_len;
}
done:
bond_dev->vlan_features = vlan_features;
bond_dev->hard_header_len = max_hard_header_len;
read_unlock(&bond->lock);
netdev_change_features(bond_dev);
}
static void bond_setup_by_slave(struct net_device *bond_dev,
struct net_device *slave_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
bond_dev->header_ops = slave_dev->header_ops;
bond_dev->type = slave_dev->type;
bond_dev->hard_header_len = slave_dev->hard_header_len;
bond_dev->addr_len = slave_dev->addr_len;
memcpy(bond_dev->broadcast, slave_dev->broadcast,
slave_dev->addr_len);
bond->setup_by_slave = 1;
}
/* On bonding slaves other than the currently active slave, suppress
* duplicates except for alb non-mcast/bcast.
*/
static bool bond_should_deliver_exact_match(struct sk_buff *skb,
struct slave *slave,
struct bonding *bond)
{
if (bond_is_slave_inactive(slave)) {
if (bond->params.mode == BOND_MODE_ALB &&
skb->pkt_type != PACKET_BROADCAST &&
skb->pkt_type != PACKET_MULTICAST)
return false;
return true;
}
return false;
}
static rx_handler_result_t bond_handle_frame(struct sk_buff **pskb)
{
struct sk_buff *skb = *pskb;
struct slave *slave;
struct bonding *bond;
void (*recv_probe)(struct sk_buff *, struct bonding *,
struct slave *);
skb = skb_share_check(skb, GFP_ATOMIC);
if (unlikely(!skb))
return RX_HANDLER_CONSUMED;
*pskb = skb;
slave = bond_slave_get_rcu(skb->dev);
bond = slave->bond;
if (bond->params.arp_interval)
slave->dev->last_rx = jiffies;
recv_probe = ACCESS_ONCE(bond->recv_probe);
if (recv_probe) {
struct sk_buff *nskb = skb_clone(skb, GFP_ATOMIC);
if (likely(nskb)) {
recv_probe(nskb, bond, slave);
dev_kfree_skb(nskb);
}
}
if (bond_should_deliver_exact_match(skb, slave, bond)) {
return RX_HANDLER_EXACT;
}
skb->dev = bond->dev;
if (bond->params.mode == BOND_MODE_ALB &&
bond->dev->priv_flags & IFF_BRIDGE_PORT &&
skb->pkt_type == PACKET_HOST) {
if (unlikely(skb_cow_head(skb,
skb->data - skb_mac_header(skb)))) {
kfree_skb(skb);
return RX_HANDLER_CONSUMED;
}
memcpy(eth_hdr(skb)->h_dest, bond->dev->dev_addr, ETH_ALEN);
}
return RX_HANDLER_ANOTHER;
}
/* enslave device <slave> to bond device <master> */
int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
const struct net_device_ops *slave_ops = slave_dev->netdev_ops;
struct slave *new_slave = NULL;
struct netdev_hw_addr *ha;
struct sockaddr addr;
int link_reporting;
int res = 0;
if (!bond->params.use_carrier && slave_dev->ethtool_ops == NULL &&
slave_ops->ndo_do_ioctl == NULL) {
pr_warning("%s: Warning: no link monitoring support for %s\n",
bond_dev->name, slave_dev->name);
}
/* already enslaved */
if (slave_dev->flags & IFF_SLAVE) {
pr_debug("Error, Device was already enslaved\n");
return -EBUSY;
}
/* vlan challenged mutual exclusion */
/* no need to lock since we're protected by rtnl_lock */
if (slave_dev->features & NETIF_F_VLAN_CHALLENGED) {
pr_debug("%s: NETIF_F_VLAN_CHALLENGED\n", slave_dev->name);
if (bond_vlan_used(bond)) {
pr_err("%s: Error: cannot enslave VLAN challenged slave %s on VLAN enabled bond %s\n",
bond_dev->name, slave_dev->name, bond_dev->name);
return -EPERM;
} else {
pr_warning("%s: Warning: enslaved VLAN challenged slave %s. Adding VLANs will be blocked as long as %s is part of bond %s\n",
bond_dev->name, slave_dev->name,
slave_dev->name, bond_dev->name);
}
} else {
pr_debug("%s: ! NETIF_F_VLAN_CHALLENGED\n", slave_dev->name);
}
/*
* Old ifenslave binaries are no longer supported. These can
* be identified with moderate accuracy by the state of the slave:
* the current ifenslave will set the interface down prior to
* enslaving it; the old ifenslave will not.
*/
if ((slave_dev->flags & IFF_UP)) {
pr_err("%s is up. This may be due to an out of date ifenslave.\n",
slave_dev->name);
res = -EPERM;
goto err_undo_flags;
}
/* set bonding device ether type by slave - bonding netdevices are
* created with ether_setup, so when the slave type is not ARPHRD_ETHER
* there is a need to override some of the type dependent attribs/funcs.
*
* bond ether type mutual exclusion - don't allow slaves of dissimilar
* ether type (eg ARPHRD_ETHER and ARPHRD_INFINIBAND) share the same bond
*/
if (bond->slave_cnt == 0) {
if (bond_dev->type != slave_dev->type) {
pr_debug("%s: change device type from %d to %d\n",
bond_dev->name,
bond_dev->type, slave_dev->type);
res = netdev_bonding_change(bond_dev,
NETDEV_PRE_TYPE_CHANGE);
res = notifier_to_errno(res);
if (res) {
pr_err("%s: refused to change device type\n",
bond_dev->name);
res = -EBUSY;
goto err_undo_flags;
}
/* Flush unicast and multicast addresses */
dev_uc_flush(bond_dev);
dev_mc_flush(bond_dev);
if (slave_dev->type != ARPHRD_ETHER)
bond_setup_by_slave(bond_dev, slave_dev);
else {
ether_setup(bond_dev);
bond_dev->priv_flags &= ~IFF_TX_SKB_SHARING;
}
netdev_bonding_change(bond_dev,
NETDEV_POST_TYPE_CHANGE);
}
} else if (bond_dev->type != slave_dev->type) {
pr_err("%s ether type (%d) is different from other slaves (%d), can not enslave it.\n",
slave_dev->name,
slave_dev->type, bond_dev->type);
res = -EINVAL;
goto err_undo_flags;
}
if (slave_ops->ndo_set_mac_address == NULL) {
if (bond->slave_cnt == 0) {
pr_warning("%s: Warning: The first slave device specified does not support setting the MAC address. Setting fail_over_mac to active.",
bond_dev->name);
bond->params.fail_over_mac = BOND_FOM_ACTIVE;
} else if (bond->params.fail_over_mac != BOND_FOM_ACTIVE) {
pr_err("%s: Error: The slave device specified does not support setting the MAC address, but fail_over_mac is not set to active.\n",
bond_dev->name);
res = -EOPNOTSUPP;
goto err_undo_flags;
}
}
call_netdevice_notifiers(NETDEV_JOIN, slave_dev);
/* If this is the first slave, then we need to set the master's hardware
* address to be the same as the slave's. */
if (is_zero_ether_addr(bond->dev->dev_addr))
memcpy(bond->dev->dev_addr, slave_dev->dev_addr,
slave_dev->addr_len);
new_slave = kzalloc(sizeof(struct slave), GFP_KERNEL);
if (!new_slave) {
res = -ENOMEM;
goto err_undo_flags;
}
/*
* Set the new_slave's queue_id to be zero. Queue ID mapping
* is set via sysfs or module option if desired.
*/
new_slave->queue_id = 0;
/* Save slave's original mtu and then set it to match the bond */
new_slave->original_mtu = slave_dev->mtu;
res = dev_set_mtu(slave_dev, bond->dev->mtu);
if (res) {
pr_debug("Error %d calling dev_set_mtu\n", res);
goto err_free;
}
/*
* Save slave's original ("permanent") mac address for modes
* that need it, and for restoring it upon release, and then
* set it to the master's address
*/
memcpy(new_slave->perm_hwaddr, slave_dev->dev_addr, ETH_ALEN);
if (!bond->params.fail_over_mac) {
/*
* Set slave to master's mac address. The application already
* set the master's mac address to that of the first slave
*/
memcpy(addr.sa_data, bond_dev->dev_addr, bond_dev->addr_len);
addr.sa_family = slave_dev->type;
res = dev_set_mac_address(slave_dev, &addr);
if (res) {
pr_debug("Error %d calling set_mac_address\n", res);
goto err_restore_mtu;
}
}
res = netdev_set_bond_master(slave_dev, bond_dev);
if (res) {
pr_debug("Error %d calling netdev_set_bond_master\n", res);
goto err_restore_mac;
}
/* open the slave since the application closed it */
res = dev_open(slave_dev);
if (res) {
pr_debug("Opening slave %s failed\n", slave_dev->name);
goto err_unset_master;
}
new_slave->bond = bond;
new_slave->dev = slave_dev;
slave_dev->priv_flags |= IFF_BONDING;
if (bond_is_lb(bond)) {
/* bond_alb_init_slave() must be called before all other stages since
* it might fail and we do not want to have to undo everything
*/
res = bond_alb_init_slave(bond, new_slave);
if (res)
goto err_close;
}
/* If the mode USES_PRIMARY, then the new slave gets the
* master's promisc (and mc) settings only if it becomes the
* curr_active_slave, and that is taken care of later when calling
* bond_change_active()
*/
if (!USES_PRIMARY(bond->params.mode)) {
/* set promiscuity level to new slave */
if (bond_dev->flags & IFF_PROMISC) {
res = dev_set_promiscuity(slave_dev, 1);
if (res)
goto err_close;
}
/* set allmulti level to new slave */
if (bond_dev->flags & IFF_ALLMULTI) {
res = dev_set_allmulti(slave_dev, 1);
if (res)
goto err_close;
}
netif_addr_lock_bh(bond_dev);
/* upload master's mc_list to new slave */
netdev_for_each_mc_addr(ha, bond_dev)
dev_mc_add(slave_dev, ha->addr);
netif_addr_unlock_bh(bond_dev);
}
if (bond->params.mode == BOND_MODE_8023AD) {
/* add lacpdu mc addr to mc list */
u8 lacpdu_multicast[ETH_ALEN] = MULTICAST_LACPDU_ADDR;
dev_mc_add(slave_dev, lacpdu_multicast);
}
bond_add_vlans_on_slave(bond, slave_dev);
write_lock_bh(&bond->lock);
bond_attach_slave(bond, new_slave);
new_slave->delay = 0;
new_slave->link_failure_count = 0;
write_unlock_bh(&bond->lock);
bond_compute_features(bond);
read_lock(&bond->lock);
new_slave->last_arp_rx = jiffies;
if (bond->params.miimon && !bond->params.use_carrier) {
link_reporting = bond_check_dev_link(bond, slave_dev, 1);
if ((link_reporting == -1) && !bond->params.arp_interval) {
/*
* miimon is set but a bonded network driver
* does not support ETHTOOL/MII and
* arp_interval is not set. Note: if
* use_carrier is enabled, we will never go
* here (because netif_carrier is always
* supported); thus, we don't need to change
* the messages for netif_carrier.
*/
pr_warning("%s: Warning: MII and ETHTOOL support not available for interface %s, and arp_interval/arp_ip_target module parameters not specified, thus bonding will not detect link failures! see bonding.txt for details.\n",
bond_dev->name, slave_dev->name);
} else if (link_reporting == -1) {
/* unable get link status using mii/ethtool */
pr_warning("%s: Warning: can't get link status from interface %s; the network driver associated with this interface does not support MII or ETHTOOL link status reporting, thus miimon has no effect on this interface.\n",
bond_dev->name, slave_dev->name);
}
}
/* check for initial state */
if (!bond->params.miimon ||
(bond_check_dev_link(bond, slave_dev, 0) == BMSR_LSTATUS)) {
if (bond->params.updelay) {
pr_debug("Initial state of slave_dev is BOND_LINK_BACK\n");
new_slave->link = BOND_LINK_BACK;
new_slave->delay = bond->params.updelay;
} else {
pr_debug("Initial state of slave_dev is BOND_LINK_UP\n");
new_slave->link = BOND_LINK_UP;
}
new_slave->jiffies = jiffies;
} else {
pr_debug("Initial state of slave_dev is BOND_LINK_DOWN\n");
new_slave->link = BOND_LINK_DOWN;
}
bond_update_speed_duplex(new_slave);
if (USES_PRIMARY(bond->params.mode) && bond->params.primary[0]) {
/* if there is a primary slave, remember it */
if (strcmp(bond->params.primary, new_slave->dev->name) == 0) {
bond->primary_slave = new_slave;
bond->force_primary = true;
}
}
write_lock_bh(&bond->curr_slave_lock);
switch (bond->params.mode) {
case BOND_MODE_ACTIVEBACKUP:
bond_set_slave_inactive_flags(new_slave);
bond_select_active_slave(bond);
break;
case BOND_MODE_8023AD:
/* in 802.3ad mode, the internal mechanism
* will activate the slaves in the selected
* aggregator
*/
bond_set_slave_inactive_flags(new_slave);
/* if this is the first slave */
if (bond->slave_cnt == 1) {
SLAVE_AD_INFO(new_slave).id = 1;
/* Initialize AD with the number of times that the AD timer is called in 1 second
* can be called only after the mac address of the bond is set
*/
bond_3ad_initialize(bond, 1000/AD_TIMER_INTERVAL);
} else {
SLAVE_AD_INFO(new_slave).id =
SLAVE_AD_INFO(new_slave->prev).id + 1;
}
bond_3ad_bind_slave(new_slave);
break;
case BOND_MODE_TLB:
case BOND_MODE_ALB:
bond_set_active_slave(new_slave);
bond_set_slave_inactive_flags(new_slave);
bond_select_active_slave(bond);
break;
default:
pr_debug("This slave is always active in trunk mode\n");
/* always active in trunk mode */
bond_set_active_slave(new_slave);
/* In trunking mode there is little meaning to curr_active_slave
* anyway (it holds no special properties of the bond device),
* so we can change it without calling change_active_interface()
*/
if (!bond->curr_active_slave)
bond->curr_active_slave = new_slave;
break;
} /* switch(bond_mode) */
write_unlock_bh(&bond->curr_slave_lock);
bond_set_carrier(bond);
#ifdef CONFIG_NET_POLL_CONTROLLER
slave_dev->npinfo = bond_netpoll_info(bond);
if (slave_dev->npinfo) {
if (slave_enable_netpoll(new_slave)) {
read_unlock(&bond->lock);
pr_info("Error, %s: master_dev is using netpoll, "
"but new slave device does not support netpoll.\n",
bond_dev->name);
res = -EBUSY;
goto err_detach;
}
}
#endif
read_unlock(&bond->lock);
res = bond_create_slave_symlinks(bond_dev, slave_dev);
if (res)
goto err_detach;
res = netdev_rx_handler_register(slave_dev, bond_handle_frame,
new_slave);
if (res) {
pr_debug("Error %d calling netdev_rx_handler_register\n", res);
goto err_dest_symlinks;
}
pr_info("%s: enslaving %s as a%s interface with a%s link.\n",
bond_dev->name, slave_dev->name,
bond_is_active_slave(new_slave) ? "n active" : " backup",
new_slave->link != BOND_LINK_DOWN ? "n up" : " down");
/* enslave is successful */
return 0;
/* Undo stages on error */
err_dest_symlinks:
bond_destroy_slave_symlinks(bond_dev, slave_dev);
err_detach:
write_lock_bh(&bond->lock);
bond_detach_slave(bond, new_slave);
write_unlock_bh(&bond->lock);
err_close:
dev_close(slave_dev);
err_unset_master:
netdev_set_bond_master(slave_dev, NULL);
err_restore_mac:
if (!bond->params.fail_over_mac) {
/* XXX TODO - fom follow mode needs to change master's
* MAC if this slave's MAC is in use by the bond, or at
* least print a warning.
*/
memcpy(addr.sa_data, new_slave->perm_hwaddr, ETH_ALEN);
addr.sa_family = slave_dev->type;
dev_set_mac_address(slave_dev, &addr);
}
err_restore_mtu:
dev_set_mtu(slave_dev, new_slave->original_mtu);
err_free:
kfree(new_slave);
err_undo_flags:
bond_compute_features(bond);
return res;
}
/*
* Try to release the slave device <slave> from the bond device <master>
* It is legal to access curr_active_slave without a lock because all the function
* is write-locked.
*
* The rules for slave state should be:
* for Active/Backup:
* Active stays on all backups go down
* for Bonded connections:
* The first up interface should be left on and all others downed.
*/
int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
struct slave *slave, *oldcurrent;
struct sockaddr addr;
netdev_features_t old_features = bond_dev->features;
/* slave is not a slave or master is not master of this slave */
if (!(slave_dev->flags & IFF_SLAVE) ||
(slave_dev->master != bond_dev)) {
pr_err("%s: Error: cannot release %s.\n",
bond_dev->name, slave_dev->name);
return -EINVAL;
}
block_netpoll_tx();
netdev_bonding_change(bond_dev, NETDEV_RELEASE);
write_lock_bh(&bond->lock);
slave = bond_get_slave_by_dev(bond, slave_dev);
if (!slave) {
/* not a slave of this bond */
pr_info("%s: %s not enslaved\n",
bond_dev->name, slave_dev->name);
write_unlock_bh(&bond->lock);
unblock_netpoll_tx();
return -EINVAL;
}
/* unregister rx_handler early so bond_handle_frame wouldn't be called
* for this slave anymore.
*/
netdev_rx_handler_unregister(slave_dev);
write_unlock_bh(&bond->lock);
synchronize_net();
write_lock_bh(&bond->lock);
if (!bond->params.fail_over_mac) {
if (!compare_ether_addr(bond_dev->dev_addr, slave->perm_hwaddr) &&
bond->slave_cnt > 1)
pr_warning("%s: Warning: the permanent HWaddr of %s - %pM - is still in use by %s. Set the HWaddr of %s to a different address to avoid conflicts.\n",
bond_dev->name, slave_dev->name,
slave->perm_hwaddr,
bond_dev->name, slave_dev->name);
}
/* Inform AD package of unbinding of slave. */
if (bond->params.mode == BOND_MODE_8023AD) {
/* must be called before the slave is
* detached from the list
*/
bond_3ad_unbind_slave(slave);
}
pr_info("%s: releasing %s interface %s\n",
bond_dev->name,
bond_is_active_slave(slave) ? "active" : "backup",
slave_dev->name);
oldcurrent = bond->curr_active_slave;
bond->current_arp_slave = NULL;
/* release the slave from its bond */
bond_detach_slave(bond, slave);
if (bond->primary_slave == slave)
bond->primary_slave = NULL;
if (oldcurrent == slave)
bond_change_active_slave(bond, NULL);
if (bond_is_lb(bond)) {
/* Must be called only after the slave has been
* detached from the list and the curr_active_slave
* has been cleared (if our_slave == old_current),
* but before a new active slave is selected.
*/
write_unlock_bh(&bond->lock);
bond_alb_deinit_slave(bond, slave);
write_lock_bh(&bond->lock);
}
if (oldcurrent == slave) {
/*
* Note that we hold RTNL over this sequence, so there
* is no concern that another slave add/remove event
* will interfere.
*/
write_unlock_bh(&bond->lock);
read_lock(&bond->lock);
write_lock_bh(&bond->curr_slave_lock);
bond_select_active_slave(bond);
write_unlock_bh(&bond->curr_slave_lock);
read_unlock(&bond->lock);
write_lock_bh(&bond->lock);
}
if (bond->slave_cnt == 0) {
bond_set_carrier(bond);
/* if the last slave was removed, zero the mac address
* of the master so it will be set by the application
* to the mac address of the first slave
*/
memset(bond_dev->dev_addr, 0, bond_dev->addr_len);
if (bond_vlan_used(bond)) {
pr_warning("%s: Warning: clearing HW address of %s while it still has VLANs.\n",
bond_dev->name, bond_dev->name);
pr_warning("%s: When re-adding slaves, make sure the bond's HW address matches its VLANs'.\n",
bond_dev->name);
}
}
write_unlock_bh(&bond->lock);
unblock_netpoll_tx();
bond_compute_features(bond);
if (!(bond_dev->features & NETIF_F_VLAN_CHALLENGED) &&
(old_features & NETIF_F_VLAN_CHALLENGED))
pr_info("%s: last VLAN challenged slave %s left bond %s. VLAN blocking is removed\n",
bond_dev->name, slave_dev->name, bond_dev->name);
/* must do this from outside any spinlocks */
bond_destroy_slave_symlinks(bond_dev, slave_dev);
bond_del_vlans_from_slave(bond, slave_dev);
/* If the mode USES_PRIMARY, then we should only remove its
* promisc and mc settings if it was the curr_active_slave, but that was
* already taken care of above when we detached the slave
*/
if (!USES_PRIMARY(bond->params.mode)) {
/* unset promiscuity level from slave */
if (bond_dev->flags & IFF_PROMISC)
dev_set_promiscuity(slave_dev, -1);
/* unset allmulti level from slave */
if (bond_dev->flags & IFF_ALLMULTI)
dev_set_allmulti(slave_dev, -1);
/* flush master's mc_list from slave */
netif_addr_lock_bh(bond_dev);
bond_mc_list_flush(bond_dev, slave_dev);
netif_addr_unlock_bh(bond_dev);
}
netdev_set_bond_master(slave_dev, NULL);
slave_disable_netpoll(slave);
/* close slave before restoring its mac address */
dev_close(slave_dev);
if (bond->params.fail_over_mac != BOND_FOM_ACTIVE) {
/* restore original ("permanent") mac address */
memcpy(addr.sa_data, slave->perm_hwaddr, ETH_ALEN);
addr.sa_family = slave_dev->type;
dev_set_mac_address(slave_dev, &addr);
}
dev_set_mtu(slave_dev, slave->original_mtu);
slave_dev->priv_flags &= ~IFF_BONDING;
kfree(slave);
return 0; /* deletion OK */
}
/*
* First release a slave and then destroy the bond if no more slaves are left.
* Must be under rtnl_lock when this function is called.
*/
static int bond_release_and_destroy(struct net_device *bond_dev,
struct net_device *slave_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
int ret;
ret = bond_release(bond_dev, slave_dev);
if ((ret == 0) && (bond->slave_cnt == 0)) {
bond_dev->priv_flags |= IFF_DISABLE_NETPOLL;
pr_info("%s: destroying bond %s.\n",
bond_dev->name, bond_dev->name);
unregister_netdevice(bond_dev);
}
return ret;
}
/*
* This function releases all slaves.
*/
static int bond_release_all(struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
struct slave *slave;
struct net_device *slave_dev;
struct sockaddr addr;
write_lock_bh(&bond->lock);
netif_carrier_off(bond_dev);
if (bond->slave_cnt == 0)
goto out;
bond->current_arp_slave = NULL;
bond->primary_slave = NULL;
bond_change_active_slave(bond, NULL);
while ((slave = bond->first_slave) != NULL) {
/* Inform AD package of unbinding of slave
* before slave is detached from the list.
*/
if (bond->params.mode == BOND_MODE_8023AD)
bond_3ad_unbind_slave(slave);
slave_dev = slave->dev;
bond_detach_slave(bond, slave);
/* now that the slave is detached, unlock and perform
* all the undo steps that should not be called from
* within a lock.
*/
write_unlock_bh(&bond->lock);
/* unregister rx_handler early so bond_handle_frame wouldn't
* be called for this slave anymore.
*/
netdev_rx_handler_unregister(slave_dev);
synchronize_net();
if (bond_is_lb(bond)) {
/* must be called only after the slave
* has been detached from the list
*/
bond_alb_deinit_slave(bond, slave);
}
bond_destroy_slave_symlinks(bond_dev, slave_dev);
bond_del_vlans_from_slave(bond, slave_dev);
/* If the mode USES_PRIMARY, then we should only remove its
* promisc and mc settings if it was the curr_active_slave, but that was
* already taken care of above when we detached the slave
*/
if (!USES_PRIMARY(bond->params.mode)) {
/* unset promiscuity level from slave */
if (bond_dev->flags & IFF_PROMISC)
dev_set_promiscuity(slave_dev, -1);
/* unset allmulti level from slave */
if (bond_dev->flags & IFF_ALLMULTI)
dev_set_allmulti(slave_dev, -1);
/* flush master's mc_list from slave */
netif_addr_lock_bh(bond_dev);
bond_mc_list_flush(bond_dev, slave_dev);
netif_addr_unlock_bh(bond_dev);
}
netdev_set_bond_master(slave_dev, NULL);
slave_disable_netpoll(slave);
/* close slave before restoring its mac address */
dev_close(slave_dev);
if (!bond->params.fail_over_mac) {
/* restore original ("permanent") mac address*/
memcpy(addr.sa_data, slave->perm_hwaddr, ETH_ALEN);
addr.sa_family = slave_dev->type;
dev_set_mac_address(slave_dev, &addr);
}
kfree(slave);
/* re-acquire the lock before getting the next slave */
write_lock_bh(&bond->lock);
}
/* zero the mac address of the master so it will be
* set by the application to the mac address of the
* first slave
*/
memset(bond_dev->dev_addr, 0, bond_dev->addr_len);
if (bond_vlan_used(bond)) {
pr_warning("%s: Warning: clearing HW address of %s while it still has VLANs.\n",
bond_dev->name, bond_dev->name);
pr_warning("%s: When re-adding slaves, make sure the bond's HW address matches its VLANs'.\n",
bond_dev->name);
}
pr_info("%s: released all slaves\n", bond_dev->name);
out:
write_unlock_bh(&bond->lock);
bond_compute_features(bond);
return 0;
}
/*
* This function changes the active slave to slave <slave_dev>.
* It returns -EINVAL in the following cases.
* - <slave_dev> is not found in the list.
* - There is not active slave now.
* - <slave_dev> is already active.
* - The link state of <slave_dev> is not BOND_LINK_UP.
* - <slave_dev> is not running.
* In these cases, this function does nothing.
* In the other cases, current_slave pointer is changed and 0 is returned.
*/
static int bond_ioctl_change_active(struct net_device *bond_dev, struct net_device *slave_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
struct slave *old_active = NULL;
struct slave *new_active = NULL;
int res = 0;
if (!USES_PRIMARY(bond->params.mode))
return -EINVAL;
/* Verify that master_dev is indeed the master of slave_dev */
if (!(slave_dev->flags & IFF_SLAVE) || (slave_dev->master != bond_dev))
return -EINVAL;
read_lock(&bond->lock);
read_lock(&bond->curr_slave_lock);
old_active = bond->curr_active_slave;
read_unlock(&bond->curr_slave_lock);
new_active = bond_get_slave_by_dev(bond, slave_dev);
/*
* Changing to the current active: do nothing; return success.
*/
if (new_active && (new_active == old_active)) {
read_unlock(&bond->lock);
return 0;
}
if ((new_active) &&
(old_active) &&
(new_active->link == BOND_LINK_UP) &&
IS_UP(new_active->dev)) {
block_netpoll_tx();
write_lock_bh(&bond->curr_slave_lock);
bond_change_active_slave(bond, new_active);
write_unlock_bh(&bond->curr_slave_lock);
unblock_netpoll_tx();
} else
res = -EINVAL;
read_unlock(&bond->lock);
return res;
}
static int bond_info_query(struct net_device *bond_dev, struct ifbond *info)
{
struct bonding *bond = netdev_priv(bond_dev);
info->bond_mode = bond->params.mode;
info->miimon = bond->params.miimon;
read_lock(&bond->lock);
info->num_slaves = bond->slave_cnt;
read_unlock(&bond->lock);
return 0;
}
static int bond_slave_info_query(struct net_device *bond_dev, struct ifslave *info)
{
struct bonding *bond = netdev_priv(bond_dev);
struct slave *slave;
int i, res = -ENODEV;
read_lock(&bond->lock);
bond_for_each_slave(bond, slave, i) {
if (i == (int)info->slave_id) {
res = 0;
strcpy(info->slave_name, slave->dev->name);
info->link = slave->link;
info->state = bond_slave_state(slave);
info->link_failure_count = slave->link_failure_count;
break;
}
}
read_unlock(&bond->lock);
return res;
}
/*-------------------------------- Monitoring -------------------------------*/
static int bond_miimon_inspect(struct bonding *bond)
{
struct slave *slave;
int i, link_state, commit = 0;
bool ignore_updelay;
ignore_updelay = !bond->curr_active_slave ? true : false;
bond_for_each_slave(bond, slave, i) {
slave->new_link = BOND_LINK_NOCHANGE;
link_state = bond_check_dev_link(bond, slave->dev, 0);
switch (slave->link) {
case BOND_LINK_UP:
if (link_state)
continue;
slave->link = BOND_LINK_FAIL;
slave->delay = bond->params.downdelay;
if (slave->delay) {
pr_info("%s: link status down for %sinterface %s, disabling it in %d ms.\n",
bond->dev->name,
(bond->params.mode ==
BOND_MODE_ACTIVEBACKUP) ?
(bond_is_active_slave(slave) ?
"active " : "backup ") : "",
slave->dev->name,
bond->params.downdelay * bond->params.miimon);
}
/*FALLTHRU*/
case BOND_LINK_FAIL:
if (link_state) {
/*
* recovered before downdelay expired
*/
slave->link = BOND_LINK_UP;
slave->jiffies = jiffies;
pr_info("%s: link status up again after %d ms for interface %s.\n",
bond->dev->name,
(bond->params.downdelay - slave->delay) *
bond->params.miimon,
slave->dev->name);
continue;
}
if (slave->delay <= 0) {
slave->new_link = BOND_LINK_DOWN;
commit++;
continue;
}
slave->delay--;
break;
case BOND_LINK_DOWN:
if (!link_state)
continue;
slave->link = BOND_LINK_BACK;
slave->delay = bond->params.updelay;
if (slave->delay) {
pr_info("%s: link status up for interface %s, enabling it in %d ms.\n",
bond->dev->name, slave->dev->name,
ignore_updelay ? 0 :
bond->params.updelay *
bond->params.miimon);
}
/*FALLTHRU*/
case BOND_LINK_BACK:
if (!link_state) {
slave->link = BOND_LINK_DOWN;
pr_info("%s: link status down again after %d ms for interface %s.\n",
bond->dev->name,
(bond->params.updelay - slave->delay) *
bond->params.miimon,
slave->dev->name);
continue;
}
if (ignore_updelay)
slave->delay = 0;
if (slave->delay <= 0) {
slave->new_link = BOND_LINK_UP;
commit++;
ignore_updelay = false;
continue;
}
slave->delay--;
break;
}
}
return commit;
}
static void bond_miimon_commit(struct bonding *bond)
{
struct slave *slave;
int i;
bond_for_each_slave(bond, slave, i) {
switch (slave->new_link) {
case BOND_LINK_NOCHANGE:
continue;
case BOND_LINK_UP:
slave->link = BOND_LINK_UP;
slave->jiffies = jiffies;
if (bond->params.mode == BOND_MODE_8023AD) {
/* prevent it from being the active one */
bond_set_backup_slave(slave);
} else if (bond->params.mode != BOND_MODE_ACTIVEBACKUP) {
/* make it immediately active */
bond_set_active_slave(slave);
} else if (slave != bond->primary_slave) {
/* prevent it from being the active one */
bond_set_backup_slave(slave);
}
bond_update_speed_duplex(slave);
pr_info("%s: link status definitely up for interface %s, %u Mbps %s duplex.\n",
bond->dev->name, slave->dev->name,
slave->speed, slave->duplex ? "full" : "half");
/* notify ad that the link status has changed */
if (bond->params.mode == BOND_MODE_8023AD)
bond_3ad_handle_link_change(slave, BOND_LINK_UP);
if (bond_is_lb(bond))
bond_alb_handle_link_change(bond, slave,
BOND_LINK_UP);
if (!bond->curr_active_slave ||
(slave == bond->primary_slave))
goto do_failover;
continue;
case BOND_LINK_DOWN:
if (slave->link_failure_count < UINT_MAX)
slave->link_failure_count++;
slave->link = BOND_LINK_DOWN;
if (bond->params.mode == BOND_MODE_ACTIVEBACKUP ||
bond->params.mode == BOND_MODE_8023AD)
bond_set_slave_inactive_flags(slave);
pr_info("%s: link status definitely down for interface %s, disabling it\n",
bond->dev->name, slave->dev->name);
if (bond->params.mode == BOND_MODE_8023AD)
bond_3ad_handle_link_change(slave,
BOND_LINK_DOWN);
if (bond_is_lb(bond))
bond_alb_handle_link_change(bond, slave,
BOND_LINK_DOWN);
if (slave == bond->curr_active_slave)
goto do_failover;
continue;
default:
pr_err("%s: invalid new link %d on slave %s\n",
bond->dev->name, slave->new_link,
slave->dev->name);
slave->new_link = BOND_LINK_NOCHANGE;
continue;
}
do_failover:
ASSERT_RTNL();
block_netpoll_tx();
write_lock_bh(&bond->curr_slave_lock);
bond_select_active_slave(bond);
write_unlock_bh(&bond->curr_slave_lock);
unblock_netpoll_tx();
}
bond_set_carrier(bond);
}
/*
* bond_mii_monitor
*
* Really a wrapper that splits the mii monitor into two phases: an
* inspection, then (if inspection indicates something needs to be done)
* an acquisition of appropriate locks followed by a commit phase to
* implement whatever link state changes are indicated.
*/
void bond_mii_monitor(struct work_struct *work)
{
struct bonding *bond = container_of(work, struct bonding,
mii_work.work);
bool should_notify_peers = false;
unsigned long delay;
read_lock(&bond->lock);
delay = msecs_to_jiffies(bond->params.miimon);
if (bond->slave_cnt == 0)
goto re_arm;
should_notify_peers = bond_should_notify_peers(bond);
if (bond_miimon_inspect(bond)) {
read_unlock(&bond->lock);
/* Race avoidance with bond_close cancel of workqueue */
if (!rtnl_trylock()) {
read_lock(&bond->lock);
delay = 1;
should_notify_peers = false;
goto re_arm;
}
read_lock(&bond->lock);
bond_miimon_commit(bond);
read_unlock(&bond->lock);
rtnl_unlock(); /* might sleep, hold no other locks */
read_lock(&bond->lock);
}
re_arm:
if (bond->params.miimon)
queue_delayed_work(bond->wq, &bond->mii_work, delay);
read_unlock(&bond->lock);
if (should_notify_peers) {
if (!rtnl_trylock()) {
read_lock(&bond->lock);
bond->send_peer_notif++;
read_unlock(&bond->lock);
return;
}
netdev_bonding_change(bond->dev, NETDEV_NOTIFY_PEERS);
rtnl_unlock();
}
}
static int bond_has_this_ip(struct bonding *bond, __be32 ip)
{
struct vlan_entry *vlan;
if (ip == bond->master_ip)
return 1;
list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
if (ip == vlan->vlan_ip)
return 1;
}
return 0;
}
/*
* We go to the (large) trouble of VLAN tagging ARP frames because
* switches in VLAN mode (especially if ports are configured as
* "native" to a VLAN) might not pass non-tagged frames.
*/
static void bond_arp_send(struct net_device *slave_dev, int arp_op, __be32 dest_ip, __be32 src_ip, unsigned short vlan_id)
{
struct sk_buff *skb;
pr_debug("arp %d on slave %s: dst %x src %x vid %d\n", arp_op,
slave_dev->name, dest_ip, src_ip, vlan_id);
skb = arp_create(arp_op, ETH_P_ARP, dest_ip, slave_dev, src_ip,
NULL, slave_dev->dev_addr, NULL);
if (!skb) {
pr_err("ARP packet allocation failed\n");
return;
}
if (vlan_id) {
skb = vlan_put_tag(skb, vlan_id);
if (!skb) {
pr_err("failed to insert VLAN tag\n");
return;
}
}
arp_xmit(skb);
}
static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
{
int i, vlan_id;
__be32 *targets = bond->params.arp_targets;
struct vlan_entry *vlan;
struct net_device *vlan_dev;
struct rtable *rt;
for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) {
if (!targets[i])
break;
pr_debug("basa: target %x\n", targets[i]);
if (!bond_vlan_used(bond)) {
pr_debug("basa: empty vlan: arp_send\n");
bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i],
bond->master_ip, 0);
continue;
}
/*
* If VLANs are configured, we do a route lookup to
* determine which VLAN interface would be used, so we
* can tag the ARP with the proper VLAN tag.
*/
rt = ip_route_output(dev_net(bond->dev), targets[i], 0,
RTO_ONLINK, 0);
if (IS_ERR(rt)) {
if (net_ratelimit()) {
pr_warning("%s: no route to arp_ip_target %pI4\n",
bond->dev->name, &targets[i]);
}
continue;
}
/*
* This target is not on a VLAN
*/
if (rt->dst.dev == bond->dev) {
ip_rt_put(rt);
pr_debug("basa: rtdev == bond->dev: arp_send\n");
bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i],
bond->master_ip, 0);
continue;
}
vlan_id = 0;
list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
rcu_read_lock();
vlan_dev = __vlan_find_dev_deep(bond->dev,
vlan->vlan_id);
rcu_read_unlock();
if (vlan_dev == rt->dst.dev) {
vlan_id = vlan->vlan_id;
pr_debug("basa: vlan match on %s %d\n",
vlan_dev->name, vlan_id);
break;
}
}
if (vlan_id) {
ip_rt_put(rt);
bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i],
vlan->vlan_ip, vlan_id);
continue;
}
if (net_ratelimit()) {
pr_warning("%s: no path to arp_ip_target %pI4 via rt.dev %s\n",
bond->dev->name, &targets[i],
rt->dst.dev ? rt->dst.dev->name : "NULL");
}
ip_rt_put(rt);
}
}
static void bond_validate_arp(struct bonding *bond, struct slave *slave, __be32 sip, __be32 tip)
{
int i;
__be32 *targets = bond->params.arp_targets;
for (i = 0; (i < BOND_MAX_ARP_TARGETS) && targets[i]; i++) {
pr_debug("bva: sip %pI4 tip %pI4 t[%d] %pI4 bhti(tip) %d\n",
&sip, &tip, i, &targets[i],
bond_has_this_ip(bond, tip));
if (sip == targets[i]) {
if (bond_has_this_ip(bond, tip))
slave->last_arp_rx = jiffies;
return;
}
}
}
static void bond_arp_rcv(struct sk_buff *skb, struct bonding *bond,
struct slave *slave)
{
struct arphdr *arp;
unsigned char *arp_ptr;
__be32 sip, tip;
if (skb->protocol != __cpu_to_be16(ETH_P_ARP))
return;
read_lock(&bond->lock);
pr_debug("bond_arp_rcv: bond %s skb->dev %s\n",
bond->dev->name, skb->dev->name);
if (!pskb_may_pull(skb, arp_hdr_len(bond->dev)))
goto out_unlock;
arp = arp_hdr(skb);
if (arp->ar_hln != bond->dev->addr_len ||
skb->pkt_type == PACKET_OTHERHOST ||
skb->pkt_type == PACKET_LOOPBACK ||
arp->ar_hrd != htons(ARPHRD_ETHER) ||
arp->ar_pro != htons(ETH_P_IP) ||
arp->ar_pln != 4)
goto out_unlock;
arp_ptr = (unsigned char *)(arp + 1);
arp_ptr += bond->dev->addr_len;
memcpy(&sip, arp_ptr, 4);
arp_ptr += 4 + bond->dev->addr_len;
memcpy(&tip, arp_ptr, 4);
pr_debug("bond_arp_rcv: %s %s/%d av %d sv %d sip %pI4 tip %pI4\n",
bond->dev->name, slave->dev->name, bond_slave_state(slave),
bond->params.arp_validate, slave_do_arp_validate(bond, slave),
&sip, &tip);
/*
* Backup slaves won't see the ARP reply, but do come through
* here for each ARP probe (so we swap the sip/tip to validate
* the probe). In a "redundant switch, common router" type of
* configuration, the ARP probe will (hopefully) travel from
* the active, through one switch, the router, then the other
* switch before reaching the backup.
*/
if (bond_is_active_slave(slave))
bond_validate_arp(bond, slave, sip, tip);
else
bond_validate_arp(bond, slave, tip, sip);
out_unlock:
read_unlock(&bond->lock);
}
/*
* this function is called regularly to monitor each slave's link
* ensuring that traffic is being sent and received when arp monitoring
* is used in load-balancing mode. if the adapter has been dormant, then an
* arp is transmitted to generate traffic. see activebackup_arp_monitor for
* arp monitoring in active backup mode.
*/
void bond_loadbalance_arp_mon(struct work_struct *work)
{
struct bonding *bond = container_of(work, struct bonding,
arp_work.work);
struct slave *slave, *oldcurrent;
int do_failover = 0;
int delta_in_ticks;
int i;
read_lock(&bond->lock);
delta_in_ticks = msecs_to_jiffies(bond->params.arp_interval);
if (bond->slave_cnt == 0)
goto re_arm;
read_lock(&bond->curr_slave_lock);
oldcurrent = bond->curr_active_slave;
read_unlock(&bond->curr_slave_lock);
/* see if any of the previous devices are up now (i.e. they have
* xmt and rcv traffic). the curr_active_slave does not come into
* the picture unless it is null. also, slave->jiffies is not needed
* here because we send an arp on each slave and give a slave as
* long as it needs to get the tx/rx within the delta.
* TODO: what about up/down delay in arp mode? it wasn't here before
* so it can wait
*/
bond_for_each_slave(bond, slave, i) {
unsigned long trans_start = dev_trans_start(slave->dev);
if (slave->link != BOND_LINK_UP) {
if (time_in_range(jiffies,
trans_start - delta_in_ticks,
trans_start + delta_in_ticks) &&
time_in_range(jiffies,
slave->dev->last_rx - delta_in_ticks,
slave->dev->last_rx + delta_in_ticks)) {
slave->link = BOND_LINK_UP;
bond_set_active_slave(slave);
/* primary_slave has no meaning in round-robin
* mode. the window of a slave being up and
* curr_active_slave being null after enslaving
* is closed.
*/
if (!oldcurrent) {
pr_info("%s: link status definitely up for interface %s, ",
bond->dev->name,
slave->dev->name);
do_failover = 1;
} else {
pr_info("%s: interface %s is now up\n",
bond->dev->name,
slave->dev->name);
}
}
} else {
/* slave->link == BOND_LINK_UP */
/* not all switches will respond to an arp request
* when the source ip is 0, so don't take the link down
* if we don't know our ip yet
*/
if (!time_in_range(jiffies,
trans_start - delta_in_ticks,
trans_start + 2 * delta_in_ticks) ||
!time_in_range(jiffies,
slave->dev->last_rx - delta_in_ticks,
slave->dev->last_rx + 2 * delta_in_ticks)) {
slave->link = BOND_LINK_DOWN;
bond_set_backup_slave(slave);
if (slave->link_failure_count < UINT_MAX)
slave->link_failure_count++;
pr_info("%s: interface %s is now down.\n",
bond->dev->name,
slave->dev->name);
if (slave == oldcurrent)
do_failover = 1;
}
}
/* note: if switch is in round-robin mode, all links
* must tx arp to ensure all links rx an arp - otherwise
* links may oscillate or not come up at all; if switch is
* in something like xor mode, there is nothing we can
* do - all replies will be rx'ed on same link causing slaves
* to be unstable during low/no traffic periods
*/
if (IS_UP(slave->dev))
bond_arp_send_all(bond, slave);
}
if (do_failover) {
block_netpoll_tx();
write_lock_bh(&bond->curr_slave_lock);
bond_select_active_slave(bond);
write_unlock_bh(&bond->curr_slave_lock);
unblock_netpoll_tx();
}
re_arm:
if (bond->params.arp_interval)
queue_delayed_work(bond->wq, &bond->arp_work, delta_in_ticks);
read_unlock(&bond->lock);
}
/*
* Called to inspect slaves for active-backup mode ARP monitor link state
* changes. Sets new_link in slaves to specify what action should take
* place for the slave. Returns 0 if no changes are found, >0 if changes
* to link states must be committed.
*
* Called with bond->lock held for read.
*/
static int bond_ab_arp_inspect(struct bonding *bond, int delta_in_ticks)
{
struct slave *slave;
int i, commit = 0;
unsigned long trans_start;
bond_for_each_slave(bond, slave, i) {
slave->new_link = BOND_LINK_NOCHANGE;
if (slave->link != BOND_LINK_UP) {
if (time_in_range(jiffies,
slave_last_rx(bond, slave) - delta_in_ticks,
slave_last_rx(bond, slave) + delta_in_ticks)) {
slave->new_link = BOND_LINK_UP;
commit++;
}
continue;
}
/*
* Give slaves 2*delta after being enslaved or made
* active. This avoids bouncing, as the last receive
* times need a full ARP monitor cycle to be updated.
*/
if (time_in_range(jiffies,
slave->jiffies - delta_in_ticks,
slave->jiffies + 2 * delta_in_ticks))
continue;
/*
* Backup slave is down if:
* - No current_arp_slave AND
* - more than 3*delta since last receive AND
* - the bond has an IP address
*
* Note: a non-null current_arp_slave indicates
* the curr_active_slave went down and we are
* searching for a new one; under this condition
* we only take the curr_active_slave down - this
* gives each slave a chance to tx/rx traffic
* before being taken out
*/
if (!bond_is_active_slave(slave) &&
!bond->current_arp_slave &&
!time_in_range(jiffies,
slave_last_rx(bond, slave) - delta_in_ticks,
slave_last_rx(bond, slave) + 3 * delta_in_ticks)) {
slave->new_link = BOND_LINK_DOWN;
commit++;
}
/*
* Active slave is down if:
* - more than 2*delta since transmitting OR
* - (more than 2*delta since receive AND
* the bond has an IP address)
*/
trans_start = dev_trans_start(slave->dev);
if (bond_is_active_slave(slave) &&
(!time_in_range(jiffies,
trans_start - delta_in_ticks,
trans_start + 2 * delta_in_ticks) ||
!time_in_range(jiffies,
slave_last_rx(bond, slave) - delta_in_ticks,
slave_last_rx(bond, slave) + 2 * delta_in_ticks))) {
slave->new_link = BOND_LINK_DOWN;
commit++;
}
}
return commit;
}
/*
* Called to commit link state changes noted by inspection step of
* active-backup mode ARP monitor.
*
* Called with RTNL and bond->lock for read.
*/
static void bond_ab_arp_commit(struct bonding *bond, int delta_in_ticks)
{
struct slave *slave;
int i;
unsigned long trans_start;
bond_for_each_slave(bond, slave, i) {
switch (slave->new_link) {
case BOND_LINK_NOCHANGE:
continue;
case BOND_LINK_UP:
trans_start = dev_trans_start(slave->dev);
if ((!bond->curr_active_slave &&
time_in_range(jiffies,
trans_start - delta_in_ticks,
trans_start + delta_in_ticks)) ||
bond->curr_active_slave != slave) {
slave->link = BOND_LINK_UP;
bond->current_arp_slave = NULL;
pr_info("%s: link status definitely up for interface %s.\n",
bond->dev->name, slave->dev->name);
if (!bond->curr_active_slave ||
(slave == bond->primary_slave))
goto do_failover;
}
continue;
case BOND_LINK_DOWN:
if (slave->link_failure_count < UINT_MAX)
slave->link_failure_count++;
slave->link = BOND_LINK_DOWN;
bond_set_slave_inactive_flags(slave);
pr_info("%s: link status definitely down for interface %s, disabling it\n",
bond->dev->name, slave->dev->name);
if (slave == bond->curr_active_slave) {
bond->current_arp_slave = NULL;
goto do_failover;
}
continue;
default:
pr_err("%s: impossible: new_link %d on slave %s\n",
bond->dev->name, slave->new_link,
slave->dev->name);
continue;
}
do_failover:
ASSERT_RTNL();
block_netpoll_tx();
write_lock_bh(&bond->curr_slave_lock);
bond_select_active_slave(bond);
write_unlock_bh(&bond->curr_slave_lock);
unblock_netpoll_tx();
}
bond_set_carrier(bond);
}
/*
* Send ARP probes for active-backup mode ARP monitor.
*
* Called with bond->lock held for read.
*/
static void bond_ab_arp_probe(struct bonding *bond)
{
struct slave *slave;
int i;
read_lock(&bond->curr_slave_lock);
if (bond->current_arp_slave && bond->curr_active_slave)
pr_info("PROBE: c_arp %s && cas %s BAD\n",
bond->current_arp_slave->dev->name,
bond->curr_active_slave->dev->name);
if (bond->curr_active_slave) {
bond_arp_send_all(bond, bond->curr_active_slave);
read_unlock(&bond->curr_slave_lock);
return;
}
read_unlock(&bond->curr_slave_lock);
/* if we don't have a curr_active_slave, search for the next available
* backup slave from the current_arp_slave and make it the candidate
* for becoming the curr_active_slave
*/
if (!bond->current_arp_slave) {
bond->current_arp_slave = bond->first_slave;
if (!bond->current_arp_slave)
return;
}
bond_set_slave_inactive_flags(bond->current_arp_slave);
/* search for next candidate */
bond_for_each_slave_from(bond, slave, i, bond->current_arp_slave->next) {
if (IS_UP(slave->dev)) {
slave->link = BOND_LINK_BACK;
bond_set_slave_active_flags(slave);
bond_arp_send_all(bond, slave);
slave->jiffies = jiffies;
bond->current_arp_slave = slave;
break;
}
/* if the link state is up at this point, we
* mark it down - this can happen if we have
* simultaneous link failures and
* reselect_active_interface doesn't make this
* one the current slave so it is still marked
* up when it is actually down
*/
if (slave->link == BOND_LINK_UP) {
slave->link = BOND_LINK_DOWN;
if (slave->link_failure_count < UINT_MAX)
slave->link_failure_count++;
bond_set_slave_inactive_flags(slave);
pr_info("%s: backup interface %s is now down.\n",
bond->dev->name, slave->dev->name);
}
}
}
void bond_activebackup_arp_mon(struct work_struct *work)
{
struct bonding *bond = container_of(work, struct bonding,
arp_work.work);
bool should_notify_peers = false;
int delta_in_ticks;
read_lock(&bond->lock);
delta_in_ticks = msecs_to_jiffies(bond->params.arp_interval);
if (bond->slave_cnt == 0)
goto re_arm;
should_notify_peers = bond_should_notify_peers(bond);
if (bond_ab_arp_inspect(bond, delta_in_ticks)) {
read_unlock(&bond->lock);
/* Race avoidance with bond_close flush of workqueue */
if (!rtnl_trylock()) {
read_lock(&bond->lock);
delta_in_ticks = 1;
should_notify_peers = false;
goto re_arm;
}
read_lock(&bond->lock);
bond_ab_arp_commit(bond, delta_in_ticks);
read_unlock(&bond->lock);
rtnl_unlock();
read_lock(&bond->lock);
}
bond_ab_arp_probe(bond);
re_arm:
if (bond->params.arp_interval)
queue_delayed_work(bond->wq, &bond->arp_work, delta_in_ticks);
read_unlock(&bond->lock);
if (should_notify_peers) {
if (!rtnl_trylock()) {
read_lock(&bond->lock);
bond->send_peer_notif++;
read_unlock(&bond->lock);
return;
}
netdev_bonding_change(bond->dev, NETDEV_NOTIFY_PEERS);
rtnl_unlock();
}
}
/*-------------------------- netdev event handling --------------------------*/
/*
* Change device name
*/
static int bond_event_changename(struct bonding *bond)
{
bond_remove_proc_entry(bond);
bond_create_proc_entry(bond);
bond_debug_reregister(bond);
return NOTIFY_DONE;
}
static int bond_master_netdev_event(unsigned long event,
struct net_device *bond_dev)
{
struct bonding *event_bond = netdev_priv(bond_dev);
switch (event) {
case NETDEV_CHANGENAME:
return bond_event_changename(event_bond);
default:
break;
}
return NOTIFY_DONE;
}
static int bond_slave_netdev_event(unsigned long event,
struct net_device *slave_dev)
{
struct net_device *bond_dev = slave_dev->master;
struct bonding *bond = netdev_priv(bond_dev);
struct slave *slave = NULL;
switch (event) {
case NETDEV_UNREGISTER:
if (bond_dev) {
if (bond->setup_by_slave)
bond_release_and_destroy(bond_dev, slave_dev);
else
bond_release(bond_dev, slave_dev);
}
break;
case NETDEV_UP:
case NETDEV_CHANGE:
slave = bond_get_slave_by_dev(bond, slave_dev);
if (slave) {
u32 old_speed = slave->speed;
u8 old_duplex = slave->duplex;
bond_update_speed_duplex(slave);
if (bond->params.mode == BOND_MODE_8023AD) {
if (old_speed != slave->speed)
bond_3ad_adapter_speed_changed(slave);
if (old_duplex != slave->duplex)
bond_3ad_adapter_duplex_changed(slave);
}
}
break;
case NETDEV_DOWN:
/*
* ... Or is it this?
*/
break;
case NETDEV_CHANGEMTU:
/*
* TODO: Should slaves be allowed to
* independently alter their MTU? For
* an active-backup bond, slaves need
* not be the same type of device, so
* MTUs may vary. For other modes,
* slaves arguably should have the
* same MTUs. To do this, we'd need to
* take over the slave's change_mtu
* function for the duration of their
* servitude.
*/
break;
case NETDEV_CHANGENAME:
/*
* TODO: handle changing the primary's name
*/
break;
case NETDEV_FEAT_CHANGE:
bond_compute_features(bond);
break;
default:
break;
}
return NOTIFY_DONE;
}
/*
* bond_netdev_event: handle netdev notifier chain events.
*
* This function receives events for the netdev chain. The caller (an
* ioctl handler calling blocking_notifier_call_chain) holds the necessary
* locks for us to safely manipulate the slave devices (RTNL lock,
* dev_probe_lock).
*/
static int bond_netdev_event(struct notifier_block *this,
unsigned long event, void *ptr)
{
struct net_device *event_dev = (struct net_device *)ptr;
pr_debug("event_dev: %s, event: %lx\n",
event_dev ? event_dev->name : "None",
event);
if (!(event_dev->priv_flags & IFF_BONDING))
return NOTIFY_DONE;
if (event_dev->flags & IFF_MASTER) {
pr_debug("IFF_MASTER\n");
return bond_master_netdev_event(event, event_dev);
}
if (event_dev->flags & IFF_SLAVE) {
pr_debug("IFF_SLAVE\n");
return bond_slave_netdev_event(event, event_dev);
}
return NOTIFY_DONE;
}
/*
* bond_inetaddr_event: handle inetaddr notifier chain events.
*
* We keep track of device IPs primarily to use as source addresses in
* ARP monitor probes (rather than spewing out broadcasts all the time).
*
* We track one IP for the main device (if it has one), plus one per VLAN.
*/
static int bond_inetaddr_event(struct notifier_block *this, unsigned long event, void *ptr)
{
struct in_ifaddr *ifa = ptr;
struct net_device *vlan_dev, *event_dev = ifa->ifa_dev->dev;
struct bond_net *bn = net_generic(dev_net(event_dev), bond_net_id);
struct bonding *bond;
struct vlan_entry *vlan;
/* we only care about primary address */
if(ifa->ifa_flags & IFA_F_SECONDARY)
return NOTIFY_DONE;
list_for_each_entry(bond, &bn->dev_list, bond_list) {
if (bond->dev == event_dev) {
switch (event) {
case NETDEV_UP:
bond->master_ip = ifa->ifa_local;
return NOTIFY_OK;
case NETDEV_DOWN:
bond->master_ip = 0;
return NOTIFY_OK;
default:
return NOTIFY_DONE;
}
}
list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
vlan_dev = __vlan_find_dev_deep(bond->dev,
vlan->vlan_id);
if (vlan_dev == event_dev) {
switch (event) {
case NETDEV_UP:
vlan->vlan_ip = ifa->ifa_local;
return NOTIFY_OK;
case NETDEV_DOWN:
vlan->vlan_ip = 0;
return NOTIFY_OK;
default:
return NOTIFY_DONE;
}
}
}
}
return NOTIFY_DONE;
}
static struct notifier_block bond_netdev_notifier = {
.notifier_call = bond_netdev_event,
};
static struct notifier_block bond_inetaddr_notifier = {
.notifier_call = bond_inetaddr_event,
};
/*---------------------------- Hashing Policies -----------------------------*/
/*
* Hash for the output device based upon layer 2 and layer 3 data. If
* the packet is not IP mimic bond_xmit_hash_policy_l2()
*/
static int bond_xmit_hash_policy_l23(struct sk_buff *skb, int count)
{
struct ethhdr *data = (struct ethhdr *)skb->data;
struct iphdr *iph = ip_hdr(skb);
if (skb->protocol == htons(ETH_P_IP)) {
return ((ntohl(iph->saddr ^ iph->daddr) & 0xffff) ^
(data->h_dest[5] ^ data->h_source[5])) % count;
}
return (data->h_dest[5] ^ data->h_source[5]) % count;
}
/*
* Hash for the output device based upon layer 3 and layer 4 data. If
* the packet is a frag or not TCP or UDP, just use layer 3 data. If it is
* altogether not IP, mimic bond_xmit_hash_policy_l2()
*/
static int bond_xmit_hash_policy_l34(struct sk_buff *skb, int count)
{
struct ethhdr *data = (struct ethhdr *)skb->data;
struct iphdr *iph = ip_hdr(skb);
__be16 *layer4hdr = (__be16 *)((u32 *)iph + iph->ihl);
int layer4_xor = 0;
if (skb->protocol == htons(ETH_P_IP)) {
if (!ip_is_fragment(iph) &&
(iph->protocol == IPPROTO_TCP ||
iph->protocol == IPPROTO_UDP)) {
layer4_xor = ntohs((*layer4hdr ^ *(layer4hdr + 1)));
}
return (layer4_xor ^
((ntohl(iph->saddr ^ iph->daddr)) & 0xffff)) % count;
}
return (data->h_dest[5] ^ data->h_source[5]) % count;
}
/*
* Hash for the output device based upon layer 2 data
*/
static int bond_xmit_hash_policy_l2(struct sk_buff *skb, int count)
{
struct ethhdr *data = (struct ethhdr *)skb->data;
return (data->h_dest[5] ^ data->h_source[5]) % count;
}
/*-------------------------- Device entry points ----------------------------*/
static int bond_open(struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
struct slave *slave;
int i;
/* reset slave->backup and slave->inactive */
read_lock(&bond->lock);
if (bond->slave_cnt > 0) {
read_lock(&bond->curr_slave_lock);
bond_for_each_slave(bond, slave, i) {
if ((bond->params.mode == BOND_MODE_ACTIVEBACKUP)
&& (slave != bond->curr_active_slave)) {
bond_set_slave_inactive_flags(slave);
} else {
bond_set_slave_active_flags(slave);
}
}
read_unlock(&bond->curr_slave_lock);
}
read_unlock(&bond->lock);
INIT_DELAYED_WORK(&bond->mcast_work, bond_resend_igmp_join_requests_delayed);
if (bond_is_lb(bond)) {
/* bond_alb_initialize must be called before the timer
* is started.
*/
if (bond_alb_initialize(bond, (bond->params.mode == BOND_MODE_ALB))) {
/* something went wrong - fail the open operation */
return -ENOMEM;
}
INIT_DELAYED_WORK(&bond->alb_work, bond_alb_monitor);
queue_delayed_work(bond->wq, &bond->alb_work, 0);
}
if (bond->params.miimon) { /* link check interval, in milliseconds. */
INIT_DELAYED_WORK(&bond->mii_work, bond_mii_monitor);
queue_delayed_work(bond->wq, &bond->mii_work, 0);
}
if (bond->params.arp_interval) { /* arp interval, in milliseconds. */
if (bond->params.mode == BOND_MODE_ACTIVEBACKUP)
INIT_DELAYED_WORK(&bond->arp_work,
bond_activebackup_arp_mon);
else
INIT_DELAYED_WORK(&bond->arp_work,
bond_loadbalance_arp_mon);
queue_delayed_work(bond->wq, &bond->arp_work, 0);
if (bond->params.arp_validate)
bond->recv_probe = bond_arp_rcv;
}
if (bond->params.mode == BOND_MODE_8023AD) {
INIT_DELAYED_WORK(&bond->ad_work, bond_3ad_state_machine_handler);
queue_delayed_work(bond->wq, &bond->ad_work, 0);
/* register to receive LACPDUs */
bond->recv_probe = bond_3ad_lacpdu_recv;
bond_3ad_initiate_agg_selection(bond, 1);
}
return 0;
}
static int bond_close(struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
write_lock_bh(&bond->lock);
bond->send_peer_notif = 0;
write_unlock_bh(&bond->lock);
if (bond->params.miimon) { /* link check interval, in milliseconds. */
cancel_delayed_work_sync(&bond->mii_work);
}
if (bond->params.arp_interval) { /* arp interval, in milliseconds. */
cancel_delayed_work_sync(&bond->arp_work);
}
switch (bond->params.mode) {
case BOND_MODE_8023AD:
cancel_delayed_work_sync(&bond->ad_work);
break;
case BOND_MODE_TLB:
case BOND_MODE_ALB:
cancel_delayed_work_sync(&bond->alb_work);
break;
default:
break;
}
if (delayed_work_pending(&bond->mcast_work))
cancel_delayed_work_sync(&bond->mcast_work);
if (bond_is_lb(bond)) {
/* Must be called only after all
* slaves have been released
*/
bond_alb_deinitialize(bond);
}
bond->recv_probe = NULL;
return 0;
}
static struct rtnl_link_stats64 *bond_get_stats(struct net_device *bond_dev,
struct rtnl_link_stats64 *stats)
{
struct bonding *bond = netdev_priv(bond_dev);
struct rtnl_link_stats64 temp;
struct slave *slave;
int i;
memset(stats, 0, sizeof(*stats));
read_lock_bh(&bond->lock);
bond_for_each_slave(bond, slave, i) {
const struct rtnl_link_stats64 *sstats =
dev_get_stats(slave->dev, &temp);
stats->rx_packets += sstats->rx_packets;
stats->rx_bytes += sstats->rx_bytes;
stats->rx_errors += sstats->rx_errors;
stats->rx_dropped += sstats->rx_dropped;
stats->tx_packets += sstats->tx_packets;
stats->tx_bytes += sstats->tx_bytes;
stats->tx_errors += sstats->tx_errors;
stats->tx_dropped += sstats->tx_dropped;
stats->multicast += sstats->multicast;
stats->collisions += sstats->collisions;
stats->rx_length_errors += sstats->rx_length_errors;
stats->rx_over_errors += sstats->rx_over_errors;
stats->rx_crc_errors += sstats->rx_crc_errors;
stats->rx_frame_errors += sstats->rx_frame_errors;
stats->rx_fifo_errors += sstats->rx_fifo_errors;
stats->rx_missed_errors += sstats->rx_missed_errors;
stats->tx_aborted_errors += sstats->tx_aborted_errors;
stats->tx_carrier_errors += sstats->tx_carrier_errors;
stats->tx_fifo_errors += sstats->tx_fifo_errors;
stats->tx_heartbeat_errors += sstats->tx_heartbeat_errors;
stats->tx_window_errors += sstats->tx_window_errors;
}
read_unlock_bh(&bond->lock);
return stats;
}
static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd)
{
struct net_device *slave_dev = NULL;
struct ifbond k_binfo;
struct ifbond __user *u_binfo = NULL;
struct ifslave k_sinfo;
struct ifslave __user *u_sinfo = NULL;
struct mii_ioctl_data *mii = NULL;
int res = 0;
pr_debug("bond_ioctl: master=%s, cmd=%d\n", bond_dev->name, cmd);
switch (cmd) {
case SIOCGMIIPHY:
mii = if_mii(ifr);
if (!mii)
return -EINVAL;
mii->phy_id = 0;
/* Fall Through */
case SIOCGMIIREG:
/*
* We do this again just in case we were called by SIOCGMIIREG
* instead of SIOCGMIIPHY.
*/
mii = if_mii(ifr);
if (!mii)
return -EINVAL;
if (mii->reg_num == 1) {
struct bonding *bond = netdev_priv(bond_dev);
mii->val_out = 0;
read_lock(&bond->lock);
read_lock(&bond->curr_slave_lock);
if (netif_carrier_ok(bond->dev))
mii->val_out = BMSR_LSTATUS;
read_unlock(&bond->curr_slave_lock);
read_unlock(&bond->lock);
}
return 0;
case BOND_INFO_QUERY_OLD:
case SIOCBONDINFOQUERY:
u_binfo = (struct ifbond __user *)ifr->ifr_data;
if (copy_from_user(&k_binfo, u_binfo, sizeof(ifbond)))
return -EFAULT;
res = bond_info_query(bond_dev, &k_binfo);
if (res == 0 &&
copy_to_user(u_binfo, &k_binfo, sizeof(ifbond)))
return -EFAULT;
return res;
case BOND_SLAVE_INFO_QUERY_OLD:
case SIOCBONDSLAVEINFOQUERY:
u_sinfo = (struct ifslave __user *)ifr->ifr_data;
if (copy_from_user(&k_sinfo, u_sinfo, sizeof(ifslave)))
return -EFAULT;
res = bond_slave_info_query(bond_dev, &k_sinfo);
if (res == 0 &&
copy_to_user(u_sinfo, &k_sinfo, sizeof(ifslave)))
return -EFAULT;
return res;
default:
/* Go on */
break;
}
if (!capable(CAP_NET_ADMIN))
return -EPERM;
slave_dev = dev_get_by_name(dev_net(bond_dev), ifr->ifr_slave);
pr_debug("slave_dev=%p:\n", slave_dev);
if (!slave_dev)
res = -ENODEV;
else {
pr_debug("slave_dev->name=%s:\n", slave_dev->name);
switch (cmd) {
case BOND_ENSLAVE_OLD:
case SIOCBONDENSLAVE:
res = bond_enslave(bond_dev, slave_dev);
break;
case BOND_RELEASE_OLD:
case SIOCBONDRELEASE:
res = bond_release(bond_dev, slave_dev);
break;
case BOND_SETHWADDR_OLD:
case SIOCBONDSETHWADDR:
res = bond_sethwaddr(bond_dev, slave_dev);
break;
case BOND_CHANGE_ACTIVE_OLD:
case SIOCBONDCHANGEACTIVE:
res = bond_ioctl_change_active(bond_dev, slave_dev);
break;
default:
res = -EOPNOTSUPP;
}
dev_put(slave_dev);
}
return res;
}
static bool bond_addr_in_mc_list(unsigned char *addr,
struct netdev_hw_addr_list *list,
int addrlen)
{
struct netdev_hw_addr *ha;
netdev_hw_addr_list_for_each(ha, list)
if (!memcmp(ha->addr, addr, addrlen))
return true;
return false;
}
static void bond_change_rx_flags(struct net_device *bond_dev, int change)
{
struct bonding *bond = netdev_priv(bond_dev);
if (change & IFF_PROMISC)
bond_set_promiscuity(bond,
bond_dev->flags & IFF_PROMISC ? 1 : -1);
if (change & IFF_ALLMULTI)
bond_set_allmulti(bond,
bond_dev->flags & IFF_ALLMULTI ? 1 : -1);
}
static void bond_set_multicast_list(struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
struct netdev_hw_addr *ha;
bool found;
read_lock(&bond->lock);
/* looking for addresses to add to slaves' mc list */
netdev_for_each_mc_addr(ha, bond_dev) {
found = bond_addr_in_mc_list(ha->addr, &bond->mc_list,
bond_dev->addr_len);
if (!found)
bond_mc_add(bond, ha->addr);
}
/* looking for addresses to delete from slaves' list */
netdev_hw_addr_list_for_each(ha, &bond->mc_list) {
found = bond_addr_in_mc_list(ha->addr, &bond_dev->mc,
bond_dev->addr_len);
if (!found)
bond_mc_del(bond, ha->addr);
}
/* save master's multicast list */
__hw_addr_flush(&bond->mc_list);
__hw_addr_add_multiple(&bond->mc_list, &bond_dev->mc,
bond_dev->addr_len, NETDEV_HW_ADDR_T_MULTICAST);
read_unlock(&bond->lock);
}
static int bond_neigh_setup(struct net_device *dev, struct neigh_parms *parms)
{
struct bonding *bond = netdev_priv(dev);
struct slave *slave = bond->first_slave;
if (slave) {
const struct net_device_ops *slave_ops
= slave->dev->netdev_ops;
if (slave_ops->ndo_neigh_setup)
return slave_ops->ndo_neigh_setup(slave->dev, parms);
}
return 0;
}
/*
* Change the MTU of all of a master's slaves to match the master
*/
static int bond_change_mtu(struct net_device *bond_dev, int new_mtu)
{
struct bonding *bond = netdev_priv(bond_dev);
struct slave *slave, *stop_at;
int res = 0;
int i;
pr_debug("bond=%p, name=%s, new_mtu=%d\n", bond,
(bond_dev ? bond_dev->name : "None"), new_mtu);
/* Can't hold bond->lock with bh disabled here since
* some base drivers panic. On the other hand we can't
* hold bond->lock without bh disabled because we'll
* deadlock. The only solution is to rely on the fact
* that we're under rtnl_lock here, and the slaves
* list won't change. This doesn't solve the problem
* of setting the slave's MTU while it is
* transmitting, but the assumption is that the base
* driver can handle that.
*
* TODO: figure out a way to safely iterate the slaves
* list, but without holding a lock around the actual
* call to the base driver.
*/
bond_for_each_slave(bond, slave, i) {
pr_debug("s %p s->p %p c_m %p\n",
slave,
slave->prev,
slave->dev->netdev_ops->ndo_change_mtu);
res = dev_set_mtu(slave->dev, new_mtu);
if (res) {
/* If we failed to set the slave's mtu to the new value
* we must abort the operation even in ACTIVE_BACKUP
* mode, because if we allow the backup slaves to have
* different mtu values than the active slave we'll
* need to change their mtu when doing a failover. That
* means changing their mtu from timer context, which
* is probably not a good idea.
*/
pr_debug("err %d %s\n", res, slave->dev->name);
goto unwind;
}
}
bond_dev->mtu = new_mtu;
return 0;
unwind:
/* unwind from head to the slave that failed */
stop_at = slave;
bond_for_each_slave_from_to(bond, slave, i, bond->first_slave, stop_at) {
int tmp_res;
tmp_res = dev_set_mtu(slave->dev, bond_dev->mtu);
if (tmp_res) {
pr_debug("unwind err %d dev %s\n",
tmp_res, slave->dev->name);
}
}
return res;
}
/*
* Change HW address
*
* Note that many devices must be down to change the HW address, and
* downing the master releases all slaves. We can make bonds full of
* bonding devices to test this, however.
*/
static int bond_set_mac_address(struct net_device *bond_dev, void *addr)
{
struct bonding *bond = netdev_priv(bond_dev);
struct sockaddr *sa = addr, tmp_sa;
struct slave *slave, *stop_at;
int res = 0;
int i;
if (bond->params.mode == BOND_MODE_ALB)
return bond_alb_set_mac_address(bond_dev, addr);
pr_debug("bond=%p, name=%s\n",
bond, bond_dev ? bond_dev->name : "None");
/*
* If fail_over_mac is set to active, do nothing and return
* success. Returning an error causes ifenslave to fail.
*/
if (bond->params.fail_over_mac == BOND_FOM_ACTIVE)
return 0;
if (!is_valid_ether_addr(sa->sa_data))
return -EADDRNOTAVAIL;
/* Can't hold bond->lock with bh disabled here since
* some base drivers panic. On the other hand we can't
* hold bond->lock without bh disabled because we'll
* deadlock. The only solution is to rely on the fact
* that we're under rtnl_lock here, and the slaves
* list won't change. This doesn't solve the problem
* of setting the slave's hw address while it is
* transmitting, but the assumption is that the base
* driver can handle that.
*
* TODO: figure out a way to safely iterate the slaves
* list, but without holding a lock around the actual
* call to the base driver.
*/
bond_for_each_slave(bond, slave, i) {
const struct net_device_ops *slave_ops = slave->dev->netdev_ops;
pr_debug("slave %p %s\n", slave, slave->dev->name);
if (slave_ops->ndo_set_mac_address == NULL) {
res = -EOPNOTSUPP;
pr_debug("EOPNOTSUPP %s\n", slave->dev->name);
goto unwind;
}
res = dev_set_mac_address(slave->dev, addr);
if (res) {
/* TODO: consider downing the slave
* and retry ?
* User should expect communications
* breakage anyway until ARP finish
* updating, so...
*/
pr_debug("err %d %s\n", res, slave->dev->name);
goto unwind;
}
}
/* success */
memcpy(bond_dev->dev_addr, sa->sa_data, bond_dev->addr_len);
return 0;
unwind:
memcpy(tmp_sa.sa_data, bond_dev->dev_addr, bond_dev->addr_len);
tmp_sa.sa_family = bond_dev->type;
/* unwind from head to the slave that failed */
stop_at = slave;
bond_for_each_slave_from_to(bond, slave, i, bond->first_slave, stop_at) {
int tmp_res;
tmp_res = dev_set_mac_address(slave->dev, &tmp_sa);
if (tmp_res) {
pr_debug("unwind err %d dev %s\n",
tmp_res, slave->dev->name);
}
}
return res;
}
static int bond_xmit_roundrobin(struct sk_buff *skb, struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
struct slave *slave, *start_at;
int i, slave_no, res = 1;
struct iphdr *iph = ip_hdr(skb);
/*
* Start with the curr_active_slave that joined the bond as the
* default for sending IGMP traffic. For failover purposes one
* needs to maintain some consistency for the interface that will
* send the join/membership reports. The curr_active_slave found
* will send all of this type of traffic.
*/
if ((iph->protocol == IPPROTO_IGMP) &&
(skb->protocol == htons(ETH_P_IP))) {
read_lock(&bond->curr_slave_lock);
slave = bond->curr_active_slave;
read_unlock(&bond->curr_slave_lock);
if (!slave)
goto out;
} else {
/*
* Concurrent TX may collide on rr_tx_counter; we accept
* that as being rare enough not to justify using an
* atomic op here.
*/
slave_no = bond->rr_tx_counter++ % bond->slave_cnt;
bond_for_each_slave(bond, slave, i) {
slave_no--;
if (slave_no < 0)
break;
}
}
start_at = slave;
bond_for_each_slave_from(bond, slave, i, start_at) {
if (IS_UP(slave->dev) &&
(slave->link == BOND_LINK_UP) &&
bond_is_active_slave(slave)) {
res = bond_dev_queue_xmit(bond, skb, slave->dev);
break;
}
}
out:
if (res) {
/* no suitable interface, frame not sent */
dev_kfree_skb(skb);
}
return NETDEV_TX_OK;
}
/*
* in active-backup mode, we know that bond->curr_active_slave is always valid if
* the bond has a usable interface.
*/
static int bond_xmit_activebackup(struct sk_buff *skb, struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
int res = 1;
read_lock(&bond->curr_slave_lock);
if (bond->curr_active_slave)
res = bond_dev_queue_xmit(bond, skb,
bond->curr_active_slave->dev);
if (res)
/* no suitable interface, frame not sent */
dev_kfree_skb(skb);
read_unlock(&bond->curr_slave_lock);
return NETDEV_TX_OK;
}
/*
* In bond_xmit_xor() , we determine the output device by using a pre-
* determined xmit_hash_policy(), If the selected device is not enabled,
* find the next active slave.
*/
static int bond_xmit_xor(struct sk_buff *skb, struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
struct slave *slave, *start_at;
int slave_no;
int i;
int res = 1;
slave_no = bond->xmit_hash_policy(skb, bond->slave_cnt);
bond_for_each_slave(bond, slave, i) {
slave_no--;
if (slave_no < 0)
break;
}
start_at = slave;
bond_for_each_slave_from(bond, slave, i, start_at) {
if (IS_UP(slave->dev) &&
(slave->link == BOND_LINK_UP) &&
bond_is_active_slave(slave)) {
res = bond_dev_queue_xmit(bond, skb, slave->dev);
break;
}
}
if (res) {
/* no suitable interface, frame not sent */
dev_kfree_skb(skb);
}
return NETDEV_TX_OK;
}
/*
* in broadcast mode, we send everything to all usable interfaces.
*/
static int bond_xmit_broadcast(struct sk_buff *skb, struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
struct slave *slave, *start_at;
struct net_device *tx_dev = NULL;
int i;
int res = 1;
read_lock(&bond->curr_slave_lock);
start_at = bond->curr_active_slave;
read_unlock(&bond->curr_slave_lock);
if (!start_at)
goto out;
bond_for_each_slave_from(bond, slave, i, start_at) {
if (IS_UP(slave->dev) &&
(slave->link == BOND_LINK_UP) &&
bond_is_active_slave(slave)) {
if (tx_dev) {
struct sk_buff *skb2 = skb_clone(skb, GFP_ATOMIC);
if (!skb2) {
pr_err("%s: Error: bond_xmit_broadcast(): skb_clone() failed\n",
bond_dev->name);
continue;
}
res = bond_dev_queue_xmit(bond, skb2, tx_dev);
if (res) {
dev_kfree_skb(skb2);
continue;
}
}
tx_dev = slave->dev;
}
}
if (tx_dev)
res = bond_dev_queue_xmit(bond, skb, tx_dev);
out:
if (res)
/* no suitable interface, frame not sent */
dev_kfree_skb(skb);
/* frame sent to all suitable interfaces */
return NETDEV_TX_OK;
}
/*------------------------- Device initialization ---------------------------*/
static void bond_set_xmit_hash_policy(struct bonding *bond)
{
switch (bond->params.xmit_policy) {
case BOND_XMIT_POLICY_LAYER23:
bond->xmit_hash_policy = bond_xmit_hash_policy_l23;
break;
case BOND_XMIT_POLICY_LAYER34:
bond->xmit_hash_policy = bond_xmit_hash_policy_l34;
break;
case BOND_XMIT_POLICY_LAYER2:
default:
bond->xmit_hash_policy = bond_xmit_hash_policy_l2;
break;
}
}
/*
* Lookup the slave that corresponds to a qid
*/
static inline int bond_slave_override(struct bonding *bond,
struct sk_buff *skb)
{
int i, res = 1;
struct slave *slave = NULL;
struct slave *check_slave;
if (!skb->queue_mapping)
return 1;
/* Find out if any slaves have the same mapping as this skb. */
bond_for_each_slave(bond, check_slave, i) {
if (check_slave->queue_id == skb->queue_mapping) {
slave = check_slave;
break;
}
}
/* If the slave isn't UP, use default transmit policy. */
if (slave && slave->queue_id && IS_UP(slave->dev) &&
(slave->link == BOND_LINK_UP)) {
res = bond_dev_queue_xmit(bond, skb, slave->dev);
}
return res;
}
static u16 bond_select_queue(struct net_device *dev, struct sk_buff *skb)
{
/*
* This helper function exists to help dev_pick_tx get the correct
* destination queue. Using a helper function skips a call to
* skb_tx_hash and will put the skbs in the queue we expect on their
* way down to the bonding driver.
*/
u16 txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) : 0;
/*
* Save the original txq to restore before passing to the driver
*/
bond_queue_mapping(skb) = skb->queue_mapping;
if (unlikely(txq >= dev->real_num_tx_queues)) {
do {
txq -= dev->real_num_tx_queues;
} while (txq >= dev->real_num_tx_queues);
}
return txq;
}
static netdev_tx_t __bond_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct bonding *bond = netdev_priv(dev);
if (TX_QUEUE_OVERRIDE(bond->params.mode)) {
if (!bond_slave_override(bond, skb))
return NETDEV_TX_OK;
}
switch (bond->params.mode) {
case BOND_MODE_ROUNDROBIN:
return bond_xmit_roundrobin(skb, dev);
case BOND_MODE_ACTIVEBACKUP:
return bond_xmit_activebackup(skb, dev);
case BOND_MODE_XOR:
return bond_xmit_xor(skb, dev);
case BOND_MODE_BROADCAST:
return bond_xmit_broadcast(skb, dev);
case BOND_MODE_8023AD:
return bond_3ad_xmit_xor(skb, dev);
case BOND_MODE_ALB:
case BOND_MODE_TLB:
return bond_alb_xmit(skb, dev);
default:
/* Should never happen, mode already checked */
pr_err("%s: Error: Unknown bonding mode %d\n",
dev->name, bond->params.mode);
WARN_ON_ONCE(1);
dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
}
static netdev_tx_t bond_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct bonding *bond = netdev_priv(dev);
netdev_tx_t ret = NETDEV_TX_OK;
/*
* If we risk deadlock from transmitting this in the
* netpoll path, tell netpoll to queue the frame for later tx
*/
if (is_netpoll_tx_blocked(dev))
return NETDEV_TX_BUSY;
read_lock(&bond->lock);
if (bond->slave_cnt)
ret = __bond_start_xmit(skb, dev);
else
dev_kfree_skb(skb);
read_unlock(&bond->lock);
return ret;
}
/*
* set bond mode specific net device operations
*/
void bond_set_mode_ops(struct bonding *bond, int mode)
{
struct net_device *bond_dev = bond->dev;
switch (mode) {
case BOND_MODE_ROUNDROBIN:
break;
case BOND_MODE_ACTIVEBACKUP:
break;
case BOND_MODE_XOR:
bond_set_xmit_hash_policy(bond);
break;
case BOND_MODE_BROADCAST:
break;
case BOND_MODE_8023AD:
bond_set_xmit_hash_policy(bond);
break;
case BOND_MODE_ALB:
/* FALLTHRU */
case BOND_MODE_TLB:
break;
default:
/* Should never happen, mode already checked */
pr_err("%s: Error: Unknown bonding mode %d\n",
bond_dev->name, mode);
break;
}
}
static void bond_ethtool_get_drvinfo(struct net_device *bond_dev,
struct ethtool_drvinfo *drvinfo)
{
strncpy(drvinfo->driver, DRV_NAME, 32);
strncpy(drvinfo->version, DRV_VERSION, 32);
snprintf(drvinfo->fw_version, 32, "%d", BOND_ABI_VERSION);
}
static const struct ethtool_ops bond_ethtool_ops = {
.get_drvinfo = bond_ethtool_get_drvinfo,
.get_link = ethtool_op_get_link,
};
static const struct net_device_ops bond_netdev_ops = {
.ndo_init = bond_init,
.ndo_uninit = bond_uninit,
.ndo_open = bond_open,
.ndo_stop = bond_close,
.ndo_start_xmit = bond_start_xmit,
.ndo_select_queue = bond_select_queue,
.ndo_get_stats64 = bond_get_stats,
.ndo_do_ioctl = bond_do_ioctl,
.ndo_change_rx_flags = bond_change_rx_flags,
.ndo_set_rx_mode = bond_set_multicast_list,
.ndo_change_mtu = bond_change_mtu,
.ndo_set_mac_address = bond_set_mac_address,
.ndo_neigh_setup = bond_neigh_setup,
.ndo_vlan_rx_add_vid = bond_vlan_rx_add_vid,
.ndo_vlan_rx_kill_vid = bond_vlan_rx_kill_vid,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_netpoll_setup = bond_netpoll_setup,
.ndo_netpoll_cleanup = bond_netpoll_cleanup,
.ndo_poll_controller = bond_poll_controller,
#endif
.ndo_add_slave = bond_enslave,
.ndo_del_slave = bond_release,
.ndo_fix_features = bond_fix_features,
};
static void bond_destructor(struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
if (bond->wq)
destroy_workqueue(bond->wq);
free_netdev(bond_dev);
}
static void bond_setup(struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
/* initialize rwlocks */
rwlock_init(&bond->lock);
rwlock_init(&bond->curr_slave_lock);
bond->params = bonding_defaults;
/* Initialize pointers */
bond->dev = bond_dev;
INIT_LIST_HEAD(&bond->vlan_list);
/* Initialize the device entry points */
ether_setup(bond_dev);
bond_dev->netdev_ops = &bond_netdev_ops;
bond_dev->ethtool_ops = &bond_ethtool_ops;
bond_set_mode_ops(bond, bond->params.mode);
bond_dev->destructor = bond_destructor;
/* Initialize the device options */
bond_dev->tx_queue_len = 0;
bond_dev->flags |= IFF_MASTER|IFF_MULTICAST;
bond_dev->priv_flags |= IFF_BONDING;
bond_dev->priv_flags &= ~(IFF_XMIT_DST_RELEASE | IFF_TX_SKB_SHARING);
/* At first, we block adding VLANs. That's the only way to
* prevent problems that occur when adding VLANs over an
* empty bond. The block will be removed once non-challenged
* slaves are enslaved.
*/
bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
/* don't acquire bond device's netif_tx_lock when
* transmitting */
bond_dev->features |= NETIF_F_LLTX;
/* By default, we declare the bond to be fully
* VLAN hardware accelerated capable. Special
* care is taken in the various xmit functions
* when there are slaves that are not hw accel
* capable
*/
bond_dev->hw_features = BOND_VLAN_FEATURES |
NETIF_F_HW_VLAN_TX |
NETIF_F_HW_VLAN_RX |
NETIF_F_HW_VLAN_FILTER;
bond_dev->hw_features &= ~(NETIF_F_ALL_CSUM & ~NETIF_F_HW_CSUM);
bond_dev->features |= bond_dev->hw_features;
}
static void bond_work_cancel_all(struct bonding *bond)
{
if (bond->params.miimon && delayed_work_pending(&bond->mii_work))
cancel_delayed_work_sync(&bond->mii_work);
if (bond->params.arp_interval && delayed_work_pending(&bond->arp_work))
cancel_delayed_work_sync(&bond->arp_work);
if (bond->params.mode == BOND_MODE_ALB &&
delayed_work_pending(&bond->alb_work))
cancel_delayed_work_sync(&bond->alb_work);
if (bond->params.mode == BOND_MODE_8023AD &&
delayed_work_pending(&bond->ad_work))
cancel_delayed_work_sync(&bond->ad_work);
if (delayed_work_pending(&bond->mcast_work))
cancel_delayed_work_sync(&bond->mcast_work);
}
/*
* Destroy a bonding device.
* Must be under rtnl_lock when this function is called.
*/
static void bond_uninit(struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
struct vlan_entry *vlan, *tmp;
bond_netpoll_cleanup(bond_dev);
/* Release the bonded slaves */
bond_release_all(bond_dev);
list_del(&bond->bond_list);
bond_work_cancel_all(bond);
bond_remove_proc_entry(bond);
bond_debug_unregister(bond);
__hw_addr_flush(&bond->mc_list);
list_for_each_entry_safe(vlan, tmp, &bond->vlan_list, vlan_list) {
list_del(&vlan->vlan_list);
kfree(vlan);
}
}
/*------------------------- Module initialization ---------------------------*/
/*
* Convert string input module parms. Accept either the
* number of the mode or its string name. A bit complicated because
* some mode names are substrings of other names, and calls from sysfs
* may have whitespace in the name (trailing newlines, for example).
*/
int bond_parse_parm(const char *buf, const struct bond_parm_tbl *tbl)
{
int modeint = -1, i, rv;
char *p, modestr[BOND_MAX_MODENAME_LEN + 1] = { 0, };
for (p = (char *)buf; *p; p++)
if (!(isdigit(*p) || isspace(*p)))
break;
if (*p)
rv = sscanf(buf, "%20s", modestr);
else
rv = sscanf(buf, "%d", &modeint);
if (!rv)
return -1;
for (i = 0; tbl[i].modename; i++) {
if (modeint == tbl[i].mode)
return tbl[i].mode;
if (strcmp(modestr, tbl[i].modename) == 0)
return tbl[i].mode;
}
return -1;
}
static int bond_check_params(struct bond_params *params)
{
int arp_validate_value, fail_over_mac_value, primary_reselect_value;
/*
* Convert string parameters.
*/
if (mode) {
bond_mode = bond_parse_parm(mode, bond_mode_tbl);
if (bond_mode == -1) {
pr_err("Error: Invalid bonding mode \"%s\"\n",
mode == NULL ? "NULL" : mode);
return -EINVAL;
}
}
if (xmit_hash_policy) {
if ((bond_mode != BOND_MODE_XOR) &&
(bond_mode != BOND_MODE_8023AD)) {
pr_info("xmit_hash_policy param is irrelevant in mode %s\n",
bond_mode_name(bond_mode));
} else {
xmit_hashtype = bond_parse_parm(xmit_hash_policy,
xmit_hashtype_tbl);
if (xmit_hashtype == -1) {
pr_err("Error: Invalid xmit_hash_policy \"%s\"\n",
xmit_hash_policy == NULL ? "NULL" :
xmit_hash_policy);
return -EINVAL;
}
}
}
if (lacp_rate) {
if (bond_mode != BOND_MODE_8023AD) {
pr_info("lacp_rate param is irrelevant in mode %s\n",
bond_mode_name(bond_mode));
} else {
lacp_fast = bond_parse_parm(lacp_rate, bond_lacp_tbl);
if (lacp_fast == -1) {
pr_err("Error: Invalid lacp rate \"%s\"\n",
lacp_rate == NULL ? "NULL" : lacp_rate);
return -EINVAL;
}
}
}
if (ad_select) {
params->ad_select = bond_parse_parm(ad_select, ad_select_tbl);
if (params->ad_select == -1) {
pr_err("Error: Invalid ad_select \"%s\"\n",
ad_select == NULL ? "NULL" : ad_select);
return -EINVAL;
}
if (bond_mode != BOND_MODE_8023AD) {
pr_warning("ad_select param only affects 802.3ad mode\n");
}
} else {
params->ad_select = BOND_AD_STABLE;
}
if (max_bonds < 0) {
pr_warning("Warning: max_bonds (%d) not in range %d-%d, so it was reset to BOND_DEFAULT_MAX_BONDS (%d)\n",
max_bonds, 0, INT_MAX, BOND_DEFAULT_MAX_BONDS);
max_bonds = BOND_DEFAULT_MAX_BONDS;
}
if (miimon < 0) {
pr_warning("Warning: miimon module parameter (%d), not in range 0-%d, so it was reset to %d\n",
miimon, INT_MAX, BOND_LINK_MON_INTERV);
miimon = BOND_LINK_MON_INTERV;
}
if (updelay < 0) {
pr_warning("Warning: updelay module parameter (%d), not in range 0-%d, so it was reset to 0\n",
updelay, INT_MAX);
updelay = 0;
}
if (downdelay < 0) {
pr_warning("Warning: downdelay module parameter (%d), not in range 0-%d, so it was reset to 0\n",
downdelay, INT_MAX);
downdelay = 0;
}
if ((use_carrier != 0) && (use_carrier != 1)) {
pr_warning("Warning: use_carrier module parameter (%d), not of valid value (0/1), so it was set to 1\n",
use_carrier);
use_carrier = 1;
}
if (num_peer_notif < 0 || num_peer_notif > 255) {
pr_warning("Warning: num_grat_arp/num_unsol_na (%d) not in range 0-255 so it was reset to 1\n",
num_peer_notif);
num_peer_notif = 1;
}
/* reset values for 802.3ad */
if (bond_mode == BOND_MODE_8023AD) {
if (!miimon) {
pr_warning("Warning: miimon must be specified, otherwise bonding will not detect link failure, speed and duplex which are essential for 802.3ad operation\n");
pr_warning("Forcing miimon to 100msec\n");
miimon = 100;
}
}
if (tx_queues < 1 || tx_queues > 255) {
pr_warning("Warning: tx_queues (%d) should be between "
"1 and 255, resetting to %d\n",
tx_queues, BOND_DEFAULT_TX_QUEUES);
tx_queues = BOND_DEFAULT_TX_QUEUES;
}
if ((all_slaves_active != 0) && (all_slaves_active != 1)) {
pr_warning("Warning: all_slaves_active module parameter (%d), "
"not of valid value (0/1), so it was set to "
"0\n", all_slaves_active);
all_slaves_active = 0;
}
if (resend_igmp < 0 || resend_igmp > 255) {
pr_warning("Warning: resend_igmp (%d) should be between "
"0 and 255, resetting to %d\n",
resend_igmp, BOND_DEFAULT_RESEND_IGMP);
resend_igmp = BOND_DEFAULT_RESEND_IGMP;
}
/* reset values for TLB/ALB */
if ((bond_mode == BOND_MODE_TLB) ||
(bond_mode == BOND_MODE_ALB)) {
if (!miimon) {
pr_warning("Warning: miimon must be specified, otherwise bonding will not detect link failure and link speed which are essential for TLB/ALB load balancing\n");
pr_warning("Forcing miimon to 100msec\n");
miimon = 100;
}
}
if (bond_mode == BOND_MODE_ALB) {
pr_notice("In ALB mode you might experience client disconnections upon reconnection of a link if the bonding module updelay parameter (%d msec) is incompatible with the forwarding delay time of the switch\n",
updelay);
}
if (!miimon) {
if (updelay || downdelay) {
/* just warn the user the up/down delay will have
* no effect since miimon is zero...
*/
pr_warning("Warning: miimon module parameter not set and updelay (%d) or downdelay (%d) module parameter is set; updelay and downdelay have no effect unless miimon is set\n",
updelay, downdelay);
}
} else {
/* don't allow arp monitoring */
if (arp_interval) {
pr_warning("Warning: miimon (%d) and arp_interval (%d) can't be used simultaneously, disabling ARP monitoring\n",
miimon, arp_interval);
arp_interval = 0;
}
if ((updelay % miimon) != 0) {
pr_warning("Warning: updelay (%d) is not a multiple of miimon (%d), updelay rounded to %d ms\n",
updelay, miimon,
(updelay / miimon) * miimon);
}
updelay /= miimon;
if ((downdelay % miimon) != 0) {
pr_warning("Warning: downdelay (%d) is not a multiple of miimon (%d), downdelay rounded to %d ms\n",
downdelay, miimon,
(downdelay / miimon) * miimon);
}
downdelay /= miimon;
}
if (arp_interval < 0) {
pr_warning("Warning: arp_interval module parameter (%d) , not in range 0-%d, so it was reset to %d\n",
arp_interval, INT_MAX, BOND_LINK_ARP_INTERV);
arp_interval = BOND_LINK_ARP_INTERV;
}
for (arp_ip_count = 0;
(arp_ip_count < BOND_MAX_ARP_TARGETS) && arp_ip_target[arp_ip_count];
arp_ip_count++) {
/* not complete check, but should be good enough to
catch mistakes */
if (!isdigit(arp_ip_target[arp_ip_count][0])) {
pr_warning("Warning: bad arp_ip_target module parameter (%s), ARP monitoring will not be performed\n",
arp_ip_target[arp_ip_count]);
arp_interval = 0;
} else {
__be32 ip = in_aton(arp_ip_target[arp_ip_count]);
arp_target[arp_ip_count] = ip;
}
}
if (arp_interval && !arp_ip_count) {
/* don't allow arping if no arp_ip_target given... */
pr_warning("Warning: arp_interval module parameter (%d) specified without providing an arp_ip_target parameter, arp_interval was reset to 0\n",
arp_interval);
arp_interval = 0;
}
if (arp_validate) {
if (bond_mode != BOND_MODE_ACTIVEBACKUP) {
pr_err("arp_validate only supported in active-backup mode\n");
return -EINVAL;
}
if (!arp_interval) {
pr_err("arp_validate requires arp_interval\n");
return -EINVAL;
}
arp_validate_value = bond_parse_parm(arp_validate,
arp_validate_tbl);
if (arp_validate_value == -1) {
pr_err("Error: invalid arp_validate \"%s\"\n",
arp_validate == NULL ? "NULL" : arp_validate);
return -EINVAL;
}
} else
arp_validate_value = 0;
if (miimon) {
pr_info("MII link monitoring set to %d ms\n", miimon);
} else if (arp_interval) {
int i;
pr_info("ARP monitoring set to %d ms, validate %s, with %d target(s):",
arp_interval,
arp_validate_tbl[arp_validate_value].modename,
arp_ip_count);
for (i = 0; i < arp_ip_count; i++)
pr_info(" %s", arp_ip_target[i]);
pr_info("\n");
} else if (max_bonds) {
/* miimon and arp_interval not set, we need one so things
* work as expected, see bonding.txt for details
*/
pr_debug("Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.\n");
}
if (primary && !USES_PRIMARY(bond_mode)) {
/* currently, using a primary only makes sense
* in active backup, TLB or ALB modes
*/
pr_warning("Warning: %s primary device specified but has no effect in %s mode\n",
primary, bond_mode_name(bond_mode));
primary = NULL;
}
if (primary && primary_reselect) {
primary_reselect_value = bond_parse_parm(primary_reselect,
pri_reselect_tbl);
if (primary_reselect_value == -1) {
pr_err("Error: Invalid primary_reselect \"%s\"\n",
primary_reselect ==
NULL ? "NULL" : primary_reselect);
return -EINVAL;
}
} else {
primary_reselect_value = BOND_PRI_RESELECT_ALWAYS;
}
if (fail_over_mac) {
fail_over_mac_value = bond_parse_parm(fail_over_mac,
fail_over_mac_tbl);
if (fail_over_mac_value == -1) {
pr_err("Error: invalid fail_over_mac \"%s\"\n",
arp_validate == NULL ? "NULL" : arp_validate);
return -EINVAL;
}
if (bond_mode != BOND_MODE_ACTIVEBACKUP)
pr_warning("Warning: fail_over_mac only affects active-backup mode.\n");
} else {
fail_over_mac_value = BOND_FOM_NONE;
}
/* fill params struct with the proper values */
params->mode = bond_mode;
params->xmit_policy = xmit_hashtype;
params->miimon = miimon;
params->num_peer_notif = num_peer_notif;
params->arp_interval = arp_interval;
params->arp_validate = arp_validate_value;
params->updelay = updelay;
params->downdelay = downdelay;
params->use_carrier = use_carrier;
params->lacp_fast = lacp_fast;
params->primary[0] = 0;
params->primary_reselect = primary_reselect_value;
params->fail_over_mac = fail_over_mac_value;
params->tx_queues = tx_queues;
params->all_slaves_active = all_slaves_active;
params->resend_igmp = resend_igmp;
params->min_links = min_links;
if (primary) {
strncpy(params->primary, primary, IFNAMSIZ);
params->primary[IFNAMSIZ - 1] = 0;
}
memcpy(params->arp_targets, arp_target, sizeof(arp_target));
return 0;
}
static struct lock_class_key bonding_netdev_xmit_lock_key;
static struct lock_class_key bonding_netdev_addr_lock_key;
static void bond_set_lockdep_class_one(struct net_device *dev,
struct netdev_queue *txq,
void *_unused)
{
lockdep_set_class(&txq->_xmit_lock,
&bonding_netdev_xmit_lock_key);
}
static void bond_set_lockdep_class(struct net_device *dev)
{
lockdep_set_class(&dev->addr_list_lock,
&bonding_netdev_addr_lock_key);
netdev_for_each_tx_queue(dev, bond_set_lockdep_class_one, NULL);
}
/*
* Called from registration process
*/
static int bond_init(struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
struct bond_net *bn = net_generic(dev_net(bond_dev), bond_net_id);
struct alb_bond_info *bond_info = &(BOND_ALB_INFO(bond));
pr_debug("Begin bond_init for %s\n", bond_dev->name);
/*
* Initialize locks that may be required during
* en/deslave operations. All of the bond_open work
* (of which this is part) should really be moved to
* a phase prior to dev_open
*/
spin_lock_init(&(bond_info->tx_hashtbl_lock));
spin_lock_init(&(bond_info->rx_hashtbl_lock));
bond->wq = create_singlethread_workqueue(bond_dev->name);
if (!bond->wq)
return -ENOMEM;
bond_set_lockdep_class(bond_dev);
bond_create_proc_entry(bond);
list_add_tail(&bond->bond_list, &bn->dev_list);
bond_prepare_sysfs_group(bond);
bond_debug_register(bond);
__hw_addr_init(&bond->mc_list);
return 0;
}
static int bond_validate(struct nlattr *tb[], struct nlattr *data[])
{
if (tb[IFLA_ADDRESS]) {
if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN)
return -EINVAL;
if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS])))
return -EADDRNOTAVAIL;
}
return 0;
}
static int bond_get_tx_queues(struct net *net, struct nlattr *tb[],
unsigned int *num_queues,
unsigned int *real_num_queues)
{
*num_queues = tx_queues;
return 0;
}
static struct rtnl_link_ops bond_link_ops __read_mostly = {
.kind = "bond",
.priv_size = sizeof(struct bonding),
.setup = bond_setup,
.validate = bond_validate,
.get_tx_queues = bond_get_tx_queues,
};
/* Create a new bond based on the specified name and bonding parameters.
* If name is NULL, obtain a suitable "bond%d" name for us.
* Caller must NOT hold rtnl_lock; we need to release it here before we
* set up our sysfs entries.
*/
int bond_create(struct net *net, const char *name)
{
struct net_device *bond_dev;
int res;
rtnl_lock();
bond_dev = alloc_netdev_mq(sizeof(struct bonding),
name ? name : "bond%d",
bond_setup, tx_queues);
if (!bond_dev) {
pr_err("%s: eek! can't alloc netdev!\n", name);
rtnl_unlock();
return -ENOMEM;
}
dev_net_set(bond_dev, net);
bond_dev->rtnl_link_ops = &bond_link_ops;
res = register_netdevice(bond_dev);
netif_carrier_off(bond_dev);
rtnl_unlock();
if (res < 0)
bond_destructor(bond_dev);
return res;
}
static int __net_init bond_net_init(struct net *net)
{
struct bond_net *bn = net_generic(net, bond_net_id);
bn->net = net;
INIT_LIST_HEAD(&bn->dev_list);
bond_create_proc_dir(bn);
bond_create_sysfs(bn);
return 0;
}
static void __net_exit bond_net_exit(struct net *net)
{
struct bond_net *bn = net_generic(net, bond_net_id);
bond_destroy_sysfs(bn);
bond_destroy_proc_dir(bn);
}
static struct pernet_operations bond_net_ops = {
.init = bond_net_init,
.exit = bond_net_exit,
.id = &bond_net_id,
.size = sizeof(struct bond_net),
};
static int __init bonding_init(void)
{
int i;
int res;
pr_info("%s", bond_version);
res = bond_check_params(&bonding_defaults);
if (res)
goto out;
res = register_pernet_subsys(&bond_net_ops);
if (res)
goto out;
res = rtnl_link_register(&bond_link_ops);
if (res)
goto err_link;
bond_create_debugfs();
for (i = 0; i < max_bonds; i++) {
res = bond_create(&init_net, NULL);
if (res)
goto err;
}
register_netdevice_notifier(&bond_netdev_notifier);
register_inetaddr_notifier(&bond_inetaddr_notifier);
out:
return res;
err:
rtnl_link_unregister(&bond_link_ops);
err_link:
unregister_pernet_subsys(&bond_net_ops);
goto out;
}
static void __exit bonding_exit(void)
{
unregister_netdevice_notifier(&bond_netdev_notifier);
unregister_inetaddr_notifier(&bond_inetaddr_notifier);
bond_destroy_debugfs();
rtnl_link_unregister(&bond_link_ops);
unregister_pernet_subsys(&bond_net_ops);
#ifdef CONFIG_NET_POLL_CONTROLLER
/*
* Make sure we don't have an imbalance on our netpoll blocking
*/
WARN_ON(atomic_read(&netpoll_block_tx));
#endif
}
module_init(bonding_init);
module_exit(bonding_exit);
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
MODULE_DESCRIPTION(DRV_DESCRIPTION ", v" DRV_VERSION);
MODULE_AUTHOR("Thomas Davis, tadavis@lbl.gov and many others");
MODULE_ALIAS_RTNL_LINK("bond");
Reference in a new issue View git blame Copy permalink