linux/drivers/net/ixgbe
Emil Tantilov 50c022e793 ixgbe: explicitly disable 100H for x540
100H is not supported on this HW, but the bit is set on the PHY.
This can result in link at 100F when advertising only 1000F.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Evan Swanson <evan.swanson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-27 02:07:31 -07:00
..
ixgbe.h ixgbe: add support for VF Transmit rate limit using iproute2 2011-03-12 04:15:08 -08:00
ixgbe_82598.c ixgbe: DCB, misallocated packet buffer size with X540 device 2011-04-13 19:26:43 -07:00
ixgbe_82599.c ixgbe: DCB, misallocated packet buffer size with X540 device 2011-04-13 19:26:43 -07:00
ixgbe_common.c ixgbe: make device_caps() generic 2011-04-13 19:26:06 -07:00
ixgbe_common.h ixgbe: make device_caps() generic 2011-04-13 19:26:06 -07:00
ixgbe_dcb.c Fix common misspellings 2011-03-31 11:26:23 -03:00
ixgbe_dcb.h ixgbe: IEEE 802.1Qaz, implement priority assignment table 2011-03-12 04:12:54 -08:00
ixgbe_dcb_82598.c ixgbe: DCB, PFC not cleared until reset occurs 2011-03-12 04:15:35 -08:00
ixgbe_dcb_82598.h ixgbe: cleanup copyright string for 2011 2011-03-03 04:43:24 -08:00
ixgbe_dcb_82599.c ixgbe: DCB, X540 devices do not respond to pause frames 2011-04-13 19:27:18 -07:00
ixgbe_dcb_82599.h ixgbe: DCB, misallocated packet buffer size with X540 device 2011-04-13 19:26:43 -07:00
ixgbe_dcb_nl.c ixgbe: cleanup short msleep's (<20ms) to use usleep_range 2011-04-13 19:23:11 -07:00
ixgbe_ethtool.c ixgbe: cleanup short msleep's (<20ms) to use usleep_range 2011-04-13 19:23:11 -07:00
ixgbe_fcoe.c ixgbe: DCB remove ixgbe_fcoe_getapp routine 2011-03-12 04:11:11 -08:00
ixgbe_fcoe.h ixgbe: add support to FCoE DDP in target mode 2011-03-07 18:04:35 -08:00
ixgbe_main.c ixgbe: add support for new HW 2011-04-13 19:24:38 -07:00
ixgbe_mbx.c ixgbe: remove timer reset to 0 on timeout 2011-03-12 04:13:41 -08:00
ixgbe_mbx.h ixgbe: cleanup copyright string for 2011 2011-03-03 04:43:24 -08:00
ixgbe_phy.c ixgbe: explicitly disable 100H for x540 2011-04-27 02:07:31 -07:00
ixgbe_phy.h ixgbe: update PHY code to support 100Mbps as well as 1G/10G 2011-03-12 04:14:01 -08:00
ixgbe_sriov.c ixgbe: add support for VF Transmit rate limit using iproute2 2011-03-12 04:15:08 -08:00
ixgbe_sriov.h ixgbe: add support for VF Transmit rate limit using iproute2 2011-03-12 04:15:08 -08:00
ixgbe_type.h ixgbe: DCB, X540 devices do not respond to pause frames 2011-04-13 19:27:18 -07:00
ixgbe_x540.c ixgbe: DCB, misallocated packet buffer size with X540 device 2011-04-13 19:26:43 -07:00
Makefile ixgbe: add MAC and PHY support for x540 2010-11-16 19:27:16 -08:00