linux/drivers/scsi/bnx2fc/bnx2fc_constants.h
Bhanu Gollapudi 853e2bd210 [SCSI] bnx2fc: Broadcom FCoE offload driver
This driver is for Broadcom Netxtreme II 57712 chip. The following
patch contains the driver sources for bnx2fc driver.  libfc/libfcoe
changes to enable bnx2fc have already gone through the fcoe
tree. bnx2fc is a SCSI low level driver that interfaces with SCSI
midlayer, libfc, libfcoe, cnic modules.  bnx2fc driver uses services
of libfc for slow path operations such as FIP and fabric
discovery. The fast path IO perations are performed after offloading
the session information to the underlying FCoE firmware.

Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-28 18:40:27 -06:00

206 lines
8.7 KiB
C

#ifndef __BNX2FC_CONSTANTS_H_
#define __BNX2FC_CONSTANTS_H_
/**
* This file defines HSI constants for the FCoE flows
*/
/* KWQ/KCQ FCoE layer code */
#define FCOE_KWQE_LAYER_CODE (7)
/* KWQ (kernel work queue) request op codes */
#define FCOE_KWQE_OPCODE_INIT1 (0)
#define FCOE_KWQE_OPCODE_INIT2 (1)
#define FCOE_KWQE_OPCODE_INIT3 (2)
#define FCOE_KWQE_OPCODE_OFFLOAD_CONN1 (3)
#define FCOE_KWQE_OPCODE_OFFLOAD_CONN2 (4)
#define FCOE_KWQE_OPCODE_OFFLOAD_CONN3 (5)
#define FCOE_KWQE_OPCODE_OFFLOAD_CONN4 (6)
#define FCOE_KWQE_OPCODE_ENABLE_CONN (7)
#define FCOE_KWQE_OPCODE_DISABLE_CONN (8)
#define FCOE_KWQE_OPCODE_DESTROY_CONN (9)
#define FCOE_KWQE_OPCODE_DESTROY (10)
#define FCOE_KWQE_OPCODE_STAT (11)
/* KCQ (kernel completion queue) response op codes */
#define FCOE_KCQE_OPCODE_INIT_FUNC (0x10)
#define FCOE_KCQE_OPCODE_DESTROY_FUNC (0x11)
#define FCOE_KCQE_OPCODE_STAT_FUNC (0x12)
#define FCOE_KCQE_OPCODE_OFFLOAD_CONN (0x15)
#define FCOE_KCQE_OPCODE_ENABLE_CONN (0x16)
#define FCOE_KCQE_OPCODE_DISABLE_CONN (0x17)
#define FCOE_KCQE_OPCODE_DESTROY_CONN (0x18)
#define FCOE_KCQE_OPCODE_CQ_EVENT_NOTIFICATION (0x20)
#define FCOE_KCQE_OPCODE_FCOE_ERROR (0x21)
/* KCQ (kernel completion queue) completion status */
#define FCOE_KCQE_COMPLETION_STATUS_SUCCESS (0x0)
#define FCOE_KCQE_COMPLETION_STATUS_ERROR (0x1)
#define FCOE_KCQE_COMPLETION_STATUS_INVALID_OPCODE (0x2)
#define FCOE_KCQE_COMPLETION_STATUS_CTX_ALLOC_FAILURE (0x3)
#define FCOE_KCQE_COMPLETION_STATUS_CTX_FREE_FAILURE (0x4)
#define FCOE_KCQE_COMPLETION_STATUS_NIC_ERROR (0x5)
/* Unsolicited CQE type */
#define FCOE_UNSOLICITED_FRAME_CQE_TYPE 0
#define FCOE_ERROR_DETECTION_CQE_TYPE 1
#define FCOE_WARNING_DETECTION_CQE_TYPE 2
/* Task context constants */
/* After driver has initialize the task in case timer services required */
#define FCOE_TASK_TX_STATE_INIT 0
/* In case timer services are required then shall be updated by Xstorm after
* start processing the task. In case no timer facilities are required then the
* driver would initialize the state to this value */
#define FCOE_TASK_TX_STATE_NORMAL 1
/* Task is under abort procedure. Updated in order to stop processing of
* pending WQEs on this task */
#define FCOE_TASK_TX_STATE_ABORT 2
/* For E_D_T_TOV timer expiration in Xstorm (Class 2 only) */
#define FCOE_TASK_TX_STATE_ERROR 3
/* For REC_TOV timer expiration indication received from Xstorm */
#define FCOE_TASK_TX_STATE_WARNING 4
/* For completed unsolicited task */
#define FCOE_TASK_TX_STATE_UNSOLICITED_COMPLETED 5
/* For exchange cleanup request task */
#define FCOE_TASK_TX_STATE_EXCHANGE_CLEANUP 6
/* For sequence cleanup request task */
#define FCOE_TASK_TX_STATE_SEQUENCE_CLEANUP 7
/* Mark task as aborted and indicate that ABTS was not transmitted */
#define FCOE_TASK_TX_STATE_BEFORE_ABTS_TX 8
/* Mark task as aborted and indicate that ABTS was transmitted */
#define FCOE_TASK_TX_STATE_AFTER_ABTS_TX 9
/* For completion the ABTS task. */
#define FCOE_TASK_TX_STATE_ABTS_TX_COMPLETED 10
/* Mark task as aborted and indicate that Exchange cleanup was not transmitted
*/
#define FCOE_TASK_TX_STATE_BEFORE_EXCHANGE_CLEANUP_TX 11
/* Mark task as aborted and indicate that Exchange cleanup was transmitted */
#define FCOE_TASK_TX_STATE_AFTER_EXCHANGE_CLEANUP_TX 12
#define FCOE_TASK_RX_STATE_NORMAL 0
#define FCOE_TASK_RX_STATE_COMPLETED 1
/* Obsolete: Intermediate completion (middle path with local completion) */
#define FCOE_TASK_RX_STATE_INTER_COMP 2
/* For REC_TOV timer expiration indication received from Xstorm */
#define FCOE_TASK_RX_STATE_WARNING 3
/* For E_D_T_TOV timer expiration in Ustorm */
#define FCOE_TASK_RX_STATE_ERROR 4
/* ABTS ACC arrived wait for local completion to finally complete the task. */
#define FCOE_TASK_RX_STATE_ABTS_ACC_ARRIVED 5
/* local completion arrived wait for ABTS ACC to finally complete the task. */
#define FCOE_TASK_RX_STATE_ABTS_LOCAL_COMP_ARRIVED 6
/* Special completion indication in case of task was aborted. */
#define FCOE_TASK_RX_STATE_ABTS_COMPLETED 7
/* Special completion indication in case of task was cleaned. */
#define FCOE_TASK_RX_STATE_EXCHANGE_CLEANUP_COMPLETED 8
/* Special completion indication (in task requested the exchange cleanup) in
* case cleaned task is in non-valid. */
#define FCOE_TASK_RX_STATE_ABORT_CLEANUP_COMPLETED 9
/* Special completion indication (in task requested the sequence cleanup) in
* case cleaned task was already returned to normal. */
#define FCOE_TASK_RX_STATE_IGNORED_SEQUENCE_CLEANUP 10
/* Exchange cleanup arrived wait until xfer will be handled to finally
* complete the task. */
#define FCOE_TASK_RX_STATE_EXCHANGE_CLEANUP_ARRIVED 11
/* Xfer handled, wait for exchange cleanup to finally complete the task. */
#define FCOE_TASK_RX_STATE_EXCHANGE_CLEANUP_HANDLED_XFER 12
#define FCOE_TASK_TYPE_WRITE 0
#define FCOE_TASK_TYPE_READ 1
#define FCOE_TASK_TYPE_MIDPATH 2
#define FCOE_TASK_TYPE_UNSOLICITED 3
#define FCOE_TASK_TYPE_ABTS 4
#define FCOE_TASK_TYPE_EXCHANGE_CLEANUP 5
#define FCOE_TASK_TYPE_SEQUENCE_CLEANUP 6
#define FCOE_TASK_DEV_TYPE_DISK 0
#define FCOE_TASK_DEV_TYPE_TAPE 1
#define FCOE_TASK_CLASS_TYPE_3 0
#define FCOE_TASK_CLASS_TYPE_2 1
/* Everest FCoE connection type */
#define B577XX_FCOE_CONNECTION_TYPE 4
/* Error codes for Error Reporting in fast path flows */
/* XFER error codes */
#define FCOE_ERROR_CODE_XFER_OOO_RO 0
#define FCOE_ERROR_CODE_XFER_RO_NOT_ALIGNED 1
#define FCOE_ERROR_CODE_XFER_NULL_BURST_LEN 2
#define FCOE_ERROR_CODE_XFER_RO_GREATER_THAN_DATA2TRNS 3
#define FCOE_ERROR_CODE_XFER_INVALID_PAYLOAD_SIZE 4
#define FCOE_ERROR_CODE_XFER_TASK_TYPE_NOT_WRITE 5
#define FCOE_ERROR_CODE_XFER_PEND_XFER_SET 6
#define FCOE_ERROR_CODE_XFER_OPENED_SEQ 7
#define FCOE_ERROR_CODE_XFER_FCTL 8
/* FCP RSP error codes */
#define FCOE_ERROR_CODE_FCP_RSP_BIDI_FLAGS_SET 9
#define FCOE_ERROR_CODE_FCP_RSP_UNDERFLOW 10
#define FCOE_ERROR_CODE_FCP_RSP_OVERFLOW 11
#define FCOE_ERROR_CODE_FCP_RSP_INVALID_LENGTH_FIELD 12
#define FCOE_ERROR_CODE_FCP_RSP_INVALID_SNS_FIELD 13
#define FCOE_ERROR_CODE_FCP_RSP_INVALID_PAYLOAD_SIZE 14
#define FCOE_ERROR_CODE_FCP_RSP_PEND_XFER_SET 15
#define FCOE_ERROR_CODE_FCP_RSP_OPENED_SEQ 16
#define FCOE_ERROR_CODE_FCP_RSP_FCTL 17
#define FCOE_ERROR_CODE_FCP_RSP_LAST_SEQ_RESET 18
#define FCOE_ERROR_CODE_FCP_RSP_CONF_REQ_NOT_SUPPORTED_YET 19
/* FCP DATA error codes */
#define FCOE_ERROR_CODE_DATA_OOO_RO 20
#define FCOE_ERROR_CODE_DATA_EXCEEDS_DEFINED_MAX_FRAME_SIZE 21
#define FCOE_ERROR_CODE_DATA_EXCEEDS_DATA2TRNS 22
#define FCOE_ERROR_CODE_DATA_SOFI3_SEQ_ACTIVE_SET 23
#define FCOE_ERROR_CODE_DATA_SOFN_SEQ_ACTIVE_RESET 24
#define FCOE_ERROR_CODE_DATA_EOFN_END_SEQ_SET 25
#define FCOE_ERROR_CODE_DATA_EOFT_END_SEQ_RESET 26
#define FCOE_ERROR_CODE_DATA_TASK_TYPE_NOT_READ 27
#define FCOE_ERROR_CODE_DATA_FCTL 28
/* Middle path error codes */
#define FCOE_ERROR_CODE_MIDPATH_TYPE_NOT_ELS 29
#define FCOE_ERROR_CODE_MIDPATH_SOFI3_SEQ_ACTIVE_SET 30
#define FCOE_ERROR_CODE_MIDPATH_SOFN_SEQ_ACTIVE_RESET 31
#define FCOE_ERROR_CODE_MIDPATH_EOFN_END_SEQ_SET 32
#define FCOE_ERROR_CODE_MIDPATH_EOFT_END_SEQ_RESET 33
#define FCOE_ERROR_CODE_MIDPATH_ELS_REPLY_FCTL 34
#define FCOE_ERROR_CODE_MIDPATH_INVALID_REPLY 35
#define FCOE_ERROR_CODE_MIDPATH_ELS_REPLY_RCTL 36
/* ABTS error codes */
#define FCOE_ERROR_CODE_ABTS_REPLY_F_CTL 37
#define FCOE_ERROR_CODE_ABTS_REPLY_DDF_RCTL_FIELD 38
#define FCOE_ERROR_CODE_ABTS_REPLY_INVALID_BLS_RCTL 39
#define FCOE_ERROR_CODE_ABTS_REPLY_INVALID_RCTL 40
#define FCOE_ERROR_CODE_ABTS_REPLY_RCTL_GENERAL_MISMATCH 41
/* Common error codes */
#define FCOE_ERROR_CODE_COMMON_MIDDLE_FRAME_WITH_PAD 42
#define FCOE_ERROR_CODE_COMMON_SEQ_INIT_IN_TCE 43
#define FCOE_ERROR_CODE_COMMON_FC_HDR_RX_ID_MISMATCH 44
#define FCOE_ERROR_CODE_COMMON_INCORRECT_SEQ_CNT 45
#define FCOE_ERROR_CODE_COMMON_DATA_FC_HDR_FCP_TYPE_MISMATCH 46
#define FCOE_ERROR_CODE_COMMON_DATA_NO_MORE_SGES 47
#define FCOE_ERROR_CODE_COMMON_OPTIONAL_FC_HDR 48
#define FCOE_ERROR_CODE_COMMON_READ_TCE_OX_ID_TOO_BIG 49
#define FCOE_ERROR_CODE_COMMON_DATA_WAS_NOT_TRANSMITTED 50
/* Unsolicited Rx error codes */
#define FCOE_ERROR_CODE_UNSOLICITED_TYPE_NOT_ELS 51
#define FCOE_ERROR_CODE_UNSOLICITED_TYPE_NOT_BLS 52
#define FCOE_ERROR_CODE_UNSOLICITED_FCTL_ELS 53
#define FCOE_ERROR_CODE_UNSOLICITED_FCTL_BLS 54
#define FCOE_ERROR_CODE_UNSOLICITED_R_CTL 55
#define FCOE_ERROR_CODE_RW_TASK_DDF_RCTL_INFO_FIELD 56
#define FCOE_ERROR_CODE_RW_TASK_INVALID_RCTL 57
#define FCOE_ERROR_CODE_RW_TASK_RCTL_GENERAL_MISMATCH 58
/* Timer error codes */
#define FCOE_ERROR_CODE_E_D_TOV_TIMER_EXPIRATION 60
#define FCOE_ERROR_CODE_REC_TOV_TIMER_EXPIRATION 61
#endif /* BNX2FC_CONSTANTS_H_ */