linux/drivers/pcmcia/pxa2xx_sharpsl.c
Linus Torvalds 4fd5f8267d Merge master.kernel.org:/home/rmk/linux-2.6-drvmodel
Manual #include fixups for clashes - there may be some unnecessary
2005-10-31 07:32:56 -08:00

303 lines
8 KiB
C

/*
* Sharp SL-C7xx Series PCMCIA routines
*
* Copyright (c) 2004-2005 Richard Purdie
*
* Based on Sharp's 2.4 kernel patches and pxa2xx_mainstone.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <asm/mach-types.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/hardware/scoop.h>
#ifdef CONFIG_SA1100_COLLIE
#include <asm/arch-sa1100/collie.h>
#else
#include <asm/arch-pxa/pxa-regs.h>
#endif
#include "soc_common.h"
#define NO_KEEP_VS 0x0001
static void sharpsl_pcmcia_init_reset(struct scoop_pcmcia_dev *scoopdev)
{
reset_scoop(scoopdev->dev);
scoopdev->keep_vs = NO_KEEP_VS;
scoopdev->keep_rd = 0;
}
static int sharpsl_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
int ret;
#ifndef CONFIG_SA1100_COLLIE
/*
* Setup default state of GPIO outputs
* before we enable them as outputs.
*/
GPSR(GPIO48_nPOE) =
GPIO_bit(GPIO48_nPOE) |
GPIO_bit(GPIO49_nPWE) |
GPIO_bit(GPIO50_nPIOR) |
GPIO_bit(GPIO51_nPIOW) |
GPIO_bit(GPIO52_nPCE_1) |
GPIO_bit(GPIO53_nPCE_2);
pxa_gpio_mode(GPIO48_nPOE_MD);
pxa_gpio_mode(GPIO49_nPWE_MD);
pxa_gpio_mode(GPIO50_nPIOR_MD);
pxa_gpio_mode(GPIO51_nPIOW_MD);
pxa_gpio_mode(GPIO52_nPCE_1_MD);
pxa_gpio_mode(GPIO53_nPCE_2_MD);
pxa_gpio_mode(GPIO54_pSKTSEL_MD);
pxa_gpio_mode(GPIO55_nPREG_MD);
pxa_gpio_mode(GPIO56_nPWAIT_MD);
pxa_gpio_mode(GPIO57_nIOIS16_MD);
#endif
/* Register interrupts */
if (scoop_devs[skt->nr].cd_irq >= 0) {
struct pcmcia_irqs cd_irq;
cd_irq.sock = skt->nr;
cd_irq.irq = scoop_devs[skt->nr].cd_irq;
cd_irq.str = scoop_devs[skt->nr].cd_irq_str;
ret = soc_pcmcia_request_irqs(skt, &cd_irq, 1);
if (ret) {
printk(KERN_ERR "Request for Compact Flash IRQ failed\n");
return ret;
}
}
skt->irq = scoop_devs[skt->nr].irq;
return 0;
}
static void sharpsl_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
{
if (scoop_devs[skt->nr].cd_irq >= 0) {
struct pcmcia_irqs cd_irq;
cd_irq.sock = skt->nr;
cd_irq.irq = scoop_devs[skt->nr].cd_irq;
cd_irq.str = scoop_devs[skt->nr].cd_irq_str;
soc_pcmcia_free_irqs(skt, &cd_irq, 1);
}
}
static void sharpsl_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
struct pcmcia_state *state)
{
unsigned short cpr, csr;
struct device *scoop = scoop_devs[skt->nr].dev;
cpr = read_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_CPR);
write_scoop_reg(scoop, SCOOP_IRM, 0x00FF);
write_scoop_reg(scoop, SCOOP_ISR, 0x0000);
write_scoop_reg(scoop, SCOOP_IRM, 0x0000);
csr = read_scoop_reg(scoop, SCOOP_CSR);
if (csr & 0x0004) {
/* card eject */
write_scoop_reg(scoop, SCOOP_CDR, 0x0000);
scoop_devs[skt->nr].keep_vs = NO_KEEP_VS;
}
else if (!(scoop_devs[skt->nr].keep_vs & NO_KEEP_VS)) {
/* keep vs1,vs2 */
write_scoop_reg(scoop, SCOOP_CDR, 0x0000);
csr |= scoop_devs[skt->nr].keep_vs;
}
else if (cpr & 0x0003) {
/* power on */
write_scoop_reg(scoop, SCOOP_CDR, 0x0000);
scoop_devs[skt->nr].keep_vs = (csr & 0x00C0);
}
else {
/* card detect */
write_scoop_reg(scoop, SCOOP_CDR, 0x0002);
}
state->detect = (csr & 0x0004) ? 0 : 1;
state->ready = (csr & 0x0002) ? 1 : 0;
state->bvd1 = (csr & 0x0010) ? 1 : 0;
state->bvd2 = (csr & 0x0020) ? 1 : 0;
state->wrprot = (csr & 0x0008) ? 1 : 0;
state->vs_3v = (csr & 0x0040) ? 0 : 1;
state->vs_Xv = (csr & 0x0080) ? 0 : 1;
if ((cpr & 0x0080) && ((cpr & 0x8040) != 0x8040)) {
printk(KERN_ERR "sharpsl_pcmcia_socket_state(): CPR=%04X, Low voltage!\n", cpr);
}
}
static int sharpsl_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
const socket_state_t *state)
{
unsigned long flags;
struct device *scoop = scoop_devs[skt->nr].dev;
unsigned short cpr, ncpr, ccr, nccr, mcr, nmcr, imr, nimr;
switch (state->Vcc) {
case 0: break;
case 33: break;
case 50: break;
default:
printk(KERN_ERR "sharpsl_pcmcia_configure_socket(): bad Vcc %u\n", state->Vcc);
return -1;
}
if ((state->Vpp!=state->Vcc) && (state->Vpp!=0)) {
printk(KERN_ERR "CF slot cannot support Vpp %u\n", state->Vpp);
return -1;
}
local_irq_save(flags);
nmcr = (mcr = read_scoop_reg(scoop, SCOOP_MCR)) & ~0x0010;
ncpr = (cpr = read_scoop_reg(scoop, SCOOP_CPR)) & ~0x0083;
nccr = (ccr = read_scoop_reg(scoop, SCOOP_CCR)) & ~0x0080;
nimr = (imr = read_scoop_reg(scoop, SCOOP_IMR)) & ~0x003E;
ncpr |= (state->Vcc == 33) ? 0x0001 :
(state->Vcc == 50) ? 0x0002 : 0;
nmcr |= (state->flags&SS_IOCARD) ? 0x0010 : 0;
ncpr |= (state->flags&SS_OUTPUT_ENA) ? 0x0080 : 0;
nccr |= (state->flags&SS_RESET)? 0x0080: 0;
nimr |= ((skt->status&SS_DETECT) ? 0x0004 : 0)|
((skt->status&SS_READY) ? 0x0002 : 0)|
((skt->status&SS_BATDEAD)? 0x0010 : 0)|
((skt->status&SS_BATWARN)? 0x0020 : 0)|
((skt->status&SS_STSCHG) ? 0x0010 : 0)|
((skt->status&SS_WRPROT) ? 0x0008 : 0);
if (!(ncpr & 0x0003)) {
scoop_devs[skt->nr].keep_rd = 0;
} else if (!scoop_devs[skt->nr].keep_rd) {
if (nccr & 0x0080)
scoop_devs[skt->nr].keep_rd = 1;
else
nccr |= 0x0080;
}
if (mcr != nmcr)
write_scoop_reg(scoop, SCOOP_MCR, nmcr);
if (cpr != ncpr)
write_scoop_reg(scoop, SCOOP_CPR, ncpr);
if (ccr != nccr)
write_scoop_reg(scoop, SCOOP_CCR, nccr);
if (imr != nimr)
write_scoop_reg(scoop, SCOOP_IMR, nimr);
local_irq_restore(flags);
return 0;
}
static void sharpsl_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
{
sharpsl_pcmcia_init_reset(&scoop_devs[skt->nr]);
/* Enable interrupt */
write_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_IMR, 0x00C0);
write_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_MCR, 0x0101);
scoop_devs[skt->nr].keep_vs = NO_KEEP_VS;
if (machine_is_collie())
/* We need to disable SS_OUTPUT_ENA here. */
write_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_CPR, read_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_CPR) & ~0x0080);
}
static void sharpsl_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
{
/* CF_BUS_OFF */
sharpsl_pcmcia_init_reset(&scoop_devs[skt->nr]);
if (machine_is_collie())
/* We need to disable SS_OUTPUT_ENA here. */
write_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_CPR, read_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_CPR) & ~0x0080);
}
static struct pcmcia_low_level sharpsl_pcmcia_ops = {
.owner = THIS_MODULE,
.hw_init = sharpsl_pcmcia_hw_init,
.hw_shutdown = sharpsl_pcmcia_hw_shutdown,
.socket_state = sharpsl_pcmcia_socket_state,
.configure_socket = sharpsl_pcmcia_configure_socket,
.socket_init = sharpsl_pcmcia_socket_init,
.socket_suspend = sharpsl_pcmcia_socket_suspend,
.first = 0,
.nr = 0,
};
static struct platform_device *sharpsl_pcmcia_device;
#ifdef CONFIG_SA1100_COLLIE
int __init pcmcia_collie_init(struct device *dev)
{
int ret = -ENODEV;
if (machine_is_collie())
ret = sa11xx_drv_pcmcia_probe(dev, &sharpsl_pcmcia_ops, 0, 1);
return ret;
}
#else
static int __init sharpsl_pcmcia_init(void)
{
int ret;
sharpsl_pcmcia_ops.nr=scoop_num;
sharpsl_pcmcia_device = kmalloc(sizeof(*sharpsl_pcmcia_device), GFP_KERNEL);
if (!sharpsl_pcmcia_device)
return -ENOMEM;
memset(sharpsl_pcmcia_device, 0, sizeof(*sharpsl_pcmcia_device));
sharpsl_pcmcia_device->name = "pxa2xx-pcmcia";
sharpsl_pcmcia_device->dev.platform_data = &sharpsl_pcmcia_ops;
sharpsl_pcmcia_device->dev.parent=scoop_devs[0].dev;
ret = platform_device_register(sharpsl_pcmcia_device);
if (ret)
kfree(sharpsl_pcmcia_device);
return ret;
}
static void __exit sharpsl_pcmcia_exit(void)
{
/*
* This call is supposed to free our sharpsl_pcmcia_device.
* Unfortunately platform_device don't have a free method, and
* we can't assume it's free of any reference at this point so we
* can't free it either.
*/
platform_device_unregister(sharpsl_pcmcia_device);
}
fs_initcall(sharpsl_pcmcia_init);
module_exit(sharpsl_pcmcia_exit);
#endif
MODULE_DESCRIPTION("Sharp SL Series PCMCIA Support");
MODULE_LICENSE("GPL");