linux/drivers/net/wireless/wavelan_cs.c
Wang Chen c16d118537 [netdrvr] Drivers should not set IFF_* flag themselves
Some hardware set promisc when they are requested to set IFF_ALLMULTI flag.
It's ok, but if drivers set IFF_PROMISC flag when they set promisc,
it will broken upper layer handle for promisc and allmulti.
In addition, drivers can use their own hardware programming to make it.
So do not allow drivers to set IFF_* flags.

This is a general driver fix, so I didn't split it to pieces and send
to specific driver maintainers.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 02:23:19 -04:00

4679 lines
132 KiB
C

/*
* Wavelan Pcmcia driver
*
* Jean II - HPLB '96
*
* Reorganisation and extension of the driver.
* Original copyright follow. See wavelan_cs.p.h for details.
*
* This code is derived from Anthony D. Joseph's code and all the changes here
* are also under the original copyright below.
*
* This code supports version 2.00 of WaveLAN/PCMCIA cards (2.4GHz), and
* can work on Linux 2.0.36 with support of David Hinds' PCMCIA Card Services
*
* Joe Finney (joe@comp.lancs.ac.uk) at Lancaster University in UK added
* critical code in the routine to initialize the Modem Management Controller.
*
* Thanks to Alan Cox and Bruce Janson for their advice.
*
* -- Yunzhou Li (scip4166@nus.sg)
*
#ifdef WAVELAN_ROAMING
* Roaming support added 07/22/98 by Justin Seger (jseger@media.mit.edu)
* based on patch by Joe Finney from Lancaster University.
#endif
*
* Lucent (formerly AT&T GIS, formerly NCR) WaveLAN PCMCIA card: An
* Ethernet-like radio transceiver controlled by an Intel 82593 coprocessor.
*
* A non-shared memory PCMCIA ethernet driver for linux
*
* ISA version modified to support PCMCIA by Anthony Joseph (adj@lcs.mit.edu)
*
*
* Joseph O'Sullivan & John Langford (josullvn@cs.cmu.edu & jcl@cs.cmu.edu)
*
* Apr 2 '98 made changes to bring the i82593 control/int handling in line
* with offical specs...
*
****************************************************************************
* Copyright 1995
* Anthony D. Joseph
* Massachusetts Institute of Technology
*
* Permission to use, copy, modify, and distribute this program
* for any purpose and without fee is hereby granted, provided
* that this copyright and permission notice appear on all copies
* and supporting documentation, the name of M.I.T. not be used
* in advertising or publicity pertaining to distribution of the
* program without specific prior permission, and notice be given
* in supporting documentation that copying and distribution is
* by permission of M.I.T. M.I.T. makes no representations about
* the suitability of this software for any purpose. It is pro-
* vided "as is" without express or implied warranty.
****************************************************************************
*
*/
/* Do *NOT* add other headers here, you are guaranteed to be wrong - Jean II */
#include "wavelan_cs.p.h" /* Private header */
#ifdef WAVELAN_ROAMING
static void wl_cell_expiry(unsigned long data);
static void wl_del_wavepoint(wavepoint_history *wavepoint, struct net_local *lp);
static void wv_nwid_filter(unsigned char mode, net_local *lp);
#endif /* WAVELAN_ROAMING */
/************************* MISC SUBROUTINES **************************/
/*
* Subroutines which won't fit in one of the following category
* (wavelan modem or i82593)
*/
/******************* MODEM MANAGEMENT SUBROUTINES *******************/
/*
* Useful subroutines to manage the modem of the wavelan
*/
/*------------------------------------------------------------------*/
/*
* Read from card's Host Adaptor Status Register.
*/
static inline u_char
hasr_read(u_long base)
{
return(inb(HASR(base)));
} /* hasr_read */
/*------------------------------------------------------------------*/
/*
* Write to card's Host Adapter Command Register.
*/
static inline void
hacr_write(u_long base,
u_char hacr)
{
outb(hacr, HACR(base));
} /* hacr_write */
/*------------------------------------------------------------------*/
/*
* Write to card's Host Adapter Command Register. Include a delay for
* those times when it is needed.
*/
static void
hacr_write_slow(u_long base,
u_char hacr)
{
hacr_write(base, hacr);
/* delay might only be needed sometimes */
mdelay(1);
} /* hacr_write_slow */
/*------------------------------------------------------------------*/
/*
* Read the Parameter Storage Area from the WaveLAN card's memory
*/
static void
psa_read(struct net_device * dev,
int o, /* offset in PSA */
u_char * b, /* buffer to fill */
int n) /* size to read */
{
net_local *lp = netdev_priv(dev);
u_char __iomem *ptr = lp->mem + PSA_ADDR + (o << 1);
while(n-- > 0)
{
*b++ = readb(ptr);
/* Due to a lack of address decode pins, the WaveLAN PCMCIA card
* only supports reading even memory addresses. That means the
* increment here MUST be two.
* Because of that, we can't use memcpy_fromio()...
*/
ptr += 2;
}
} /* psa_read */
/*------------------------------------------------------------------*/
/*
* Write the Paramter Storage Area to the WaveLAN card's memory
*/
static void
psa_write(struct net_device * dev,
int o, /* Offset in psa */
u_char * b, /* Buffer in memory */
int n) /* Length of buffer */
{
net_local *lp = netdev_priv(dev);
u_char __iomem *ptr = lp->mem + PSA_ADDR + (o << 1);
int count = 0;
unsigned int base = dev->base_addr;
/* As there seem to have no flag PSA_BUSY as in the ISA model, we are
* oblige to verify this address to know when the PSA is ready... */
volatile u_char __iomem *verify = lp->mem + PSA_ADDR +
(psaoff(0, psa_comp_number) << 1);
/* Authorize writing to PSA */
hacr_write(base, HACR_PWR_STAT | HACR_ROM_WEN);
while(n-- > 0)
{
/* write to PSA */
writeb(*b++, ptr);
ptr += 2;
/* I don't have the spec, so I don't know what the correct
* sequence to write is. This hack seem to work for me... */
count = 0;
while((readb(verify) != PSA_COMP_PCMCIA_915) && (count++ < 100))
mdelay(1);
}
/* Put the host interface back in standard state */
hacr_write(base, HACR_DEFAULT);
} /* psa_write */
#ifdef SET_PSA_CRC
/*------------------------------------------------------------------*/
/*
* Calculate the PSA CRC
* Thanks to Valster, Nico <NVALSTER@wcnd.nl.lucent.com> for the code
* NOTE: By specifying a length including the CRC position the
* returned value should be zero. (i.e. a correct checksum in the PSA)
*
* The Windows drivers don't use the CRC, but the AP and the PtP tool
* depend on it.
*/
static u_short
psa_crc(unsigned char * psa, /* The PSA */
int size) /* Number of short for CRC */
{
int byte_cnt; /* Loop on the PSA */
u_short crc_bytes = 0; /* Data in the PSA */
int bit_cnt; /* Loop on the bits of the short */
for(byte_cnt = 0; byte_cnt < size; byte_cnt++ )
{
crc_bytes ^= psa[byte_cnt]; /* Its an xor */
for(bit_cnt = 1; bit_cnt < 9; bit_cnt++ )
{
if(crc_bytes & 0x0001)
crc_bytes = (crc_bytes >> 1) ^ 0xA001;
else
crc_bytes >>= 1 ;
}
}
return crc_bytes;
} /* psa_crc */
#endif /* SET_PSA_CRC */
/*------------------------------------------------------------------*/
/*
* update the checksum field in the Wavelan's PSA
*/
static void
update_psa_checksum(struct net_device * dev)
{
#ifdef SET_PSA_CRC
psa_t psa;
u_short crc;
/* read the parameter storage area */
psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa));
/* update the checksum */
crc = psa_crc((unsigned char *) &psa,
sizeof(psa) - sizeof(psa.psa_crc[0]) - sizeof(psa.psa_crc[1])
- sizeof(psa.psa_crc_status));
psa.psa_crc[0] = crc & 0xFF;
psa.psa_crc[1] = (crc & 0xFF00) >> 8;
/* Write it ! */
psa_write(dev, (char *)&psa.psa_crc - (char *)&psa,
(unsigned char *)&psa.psa_crc, 2);
#ifdef DEBUG_IOCTL_INFO
printk (KERN_DEBUG "%s: update_psa_checksum(): crc = 0x%02x%02x\n",
dev->name, psa.psa_crc[0], psa.psa_crc[1]);
/* Check again (luxury !) */
crc = psa_crc((unsigned char *) &psa,
sizeof(psa) - sizeof(psa.psa_crc_status));
if(crc != 0)
printk(KERN_WARNING "%s: update_psa_checksum(): CRC does not agree with PSA data (even after recalculating)\n", dev->name);
#endif /* DEBUG_IOCTL_INFO */
#endif /* SET_PSA_CRC */
} /* update_psa_checksum */
/*------------------------------------------------------------------*/
/*
* Write 1 byte to the MMC.
*/
static void
mmc_out(u_long base,
u_short o,
u_char d)
{
int count = 0;
/* Wait for MMC to go idle */
while((count++ < 100) && (inb(HASR(base)) & HASR_MMI_BUSY))
udelay(10);
outb((u_char)((o << 1) | MMR_MMI_WR), MMR(base));
outb(d, MMD(base));
}
/*------------------------------------------------------------------*/
/*
* Routine to write bytes to the Modem Management Controller.
* We start by the end because it is the way it should be !
*/
static void
mmc_write(u_long base,
u_char o,
u_char * b,
int n)
{
o += n;
b += n;
while(n-- > 0 )
mmc_out(base, --o, *(--b));
} /* mmc_write */
/*------------------------------------------------------------------*/
/*
* Read 1 byte from the MMC.
* Optimised version for 1 byte, avoid using memory...
*/
static u_char
mmc_in(u_long base,
u_short o)
{
int count = 0;
while((count++ < 100) && (inb(HASR(base)) & HASR_MMI_BUSY))
udelay(10);
outb(o << 1, MMR(base)); /* Set the read address */
outb(0, MMD(base)); /* Required dummy write */
while((count++ < 100) && (inb(HASR(base)) & HASR_MMI_BUSY))
udelay(10);
return (u_char) (inb(MMD(base))); /* Now do the actual read */
}
/*------------------------------------------------------------------*/
/*
* Routine to read bytes from the Modem Management Controller.
* The implementation is complicated by a lack of address lines,
* which prevents decoding of the low-order bit.
* (code has just been moved in the above function)
* We start by the end because it is the way it should be !
*/
static void
mmc_read(u_long base,
u_char o,
u_char * b,
int n)
{
o += n;
b += n;
while(n-- > 0)
*(--b) = mmc_in(base, --o);
} /* mmc_read */
/*------------------------------------------------------------------*/
/*
* Get the type of encryption available...
*/
static inline int
mmc_encr(u_long base) /* i/o port of the card */
{
int temp;
temp = mmc_in(base, mmroff(0, mmr_des_avail));
if((temp != MMR_DES_AVAIL_DES) && (temp != MMR_DES_AVAIL_AES))
return 0;
else
return temp;
}
/*------------------------------------------------------------------*/
/*
* Wait for the frequency EEprom to complete a command...
*/
static void
fee_wait(u_long base, /* i/o port of the card */
int delay, /* Base delay to wait for */
int number) /* Number of time to wait */
{
int count = 0; /* Wait only a limited time */
while((count++ < number) &&
(mmc_in(base, mmroff(0, mmr_fee_status)) & MMR_FEE_STATUS_BUSY))
udelay(delay);
}
/*------------------------------------------------------------------*/
/*
* Read bytes from the Frequency EEprom (frequency select cards).
*/
static void
fee_read(u_long base, /* i/o port of the card */
u_short o, /* destination offset */
u_short * b, /* data buffer */
int n) /* number of registers */
{
b += n; /* Position at the end of the area */
/* Write the address */
mmc_out(base, mmwoff(0, mmw_fee_addr), o + n - 1);
/* Loop on all buffer */
while(n-- > 0)
{
/* Write the read command */
mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_READ);
/* Wait until EEprom is ready (should be quick !) */
fee_wait(base, 10, 100);
/* Read the value */
*--b = ((mmc_in(base, mmroff(0, mmr_fee_data_h)) << 8) |
mmc_in(base, mmroff(0, mmr_fee_data_l)));
}
}
/*------------------------------------------------------------------*/
/*
* Write bytes from the Frequency EEprom (frequency select cards).
* This is a bit complicated, because the frequency eeprom has to
* be unprotected and the write enabled.
* Jean II
*/
static void
fee_write(u_long base, /* i/o port of the card */
u_short o, /* destination offset */
u_short * b, /* data buffer */
int n) /* number of registers */
{
b += n; /* Position at the end of the area */
#ifdef EEPROM_IS_PROTECTED /* disabled */
#ifdef DOESNT_SEEM_TO_WORK /* disabled */
/* Ask to read the protected register */
mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRREAD);
fee_wait(base, 10, 100);
/* Read the protected register */
printk("Protected 2 : %02X-%02X\n",
mmc_in(base, mmroff(0, mmr_fee_data_h)),
mmc_in(base, mmroff(0, mmr_fee_data_l)));
#endif /* DOESNT_SEEM_TO_WORK */
/* Enable protected register */
mmc_out(base, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_EN);
mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PREN);
fee_wait(base, 10, 100);
/* Unprotect area */
mmc_out(base, mmwoff(0, mmw_fee_addr), o + n);
mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRWRITE);
#ifdef DOESNT_SEEM_TO_WORK /* disabled */
/* Or use : */
mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRCLEAR);
#endif /* DOESNT_SEEM_TO_WORK */
fee_wait(base, 10, 100);
#endif /* EEPROM_IS_PROTECTED */
/* Write enable */
mmc_out(base, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_EN);
mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WREN);
fee_wait(base, 10, 100);
/* Write the EEprom address */
mmc_out(base, mmwoff(0, mmw_fee_addr), o + n - 1);
/* Loop on all buffer */
while(n-- > 0)
{
/* Write the value */
mmc_out(base, mmwoff(0, mmw_fee_data_h), (*--b) >> 8);
mmc_out(base, mmwoff(0, mmw_fee_data_l), *b & 0xFF);
/* Write the write command */
mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WRITE);
/* Wavelan doc says : wait at least 10 ms for EEBUSY = 0 */
mdelay(10);
fee_wait(base, 10, 100);
}
/* Write disable */
mmc_out(base, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_DS);
mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WDS);
fee_wait(base, 10, 100);
#ifdef EEPROM_IS_PROTECTED /* disabled */
/* Reprotect EEprom */
mmc_out(base, mmwoff(0, mmw_fee_addr), 0x00);
mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRWRITE);
fee_wait(base, 10, 100);
#endif /* EEPROM_IS_PROTECTED */
}
/******************* WaveLAN Roaming routines... ********************/
#ifdef WAVELAN_ROAMING /* Conditional compile, see wavelan_cs.h */
static unsigned char WAVELAN_BEACON_ADDRESS[] = {0x09,0x00,0x0e,0x20,0x03,0x00};
static void wv_roam_init(struct net_device *dev)
{
net_local *lp= netdev_priv(dev);
/* Do not remove this unless you have a good reason */
printk(KERN_NOTICE "%s: Warning, you have enabled roaming on"
" device %s !\n", dev->name, dev->name);
printk(KERN_NOTICE "Roaming is currently an experimental unsupported feature"
" of the Wavelan driver.\n");
printk(KERN_NOTICE "It may work, but may also make the driver behave in"
" erratic ways or crash.\n");
lp->wavepoint_table.head=NULL; /* Initialise WavePoint table */
lp->wavepoint_table.num_wavepoints=0;
lp->wavepoint_table.locked=0;
lp->curr_point=NULL; /* No default WavePoint */
lp->cell_search=0;
lp->cell_timer.data=(long)lp; /* Start cell expiry timer */
lp->cell_timer.function=wl_cell_expiry;
lp->cell_timer.expires=jiffies+CELL_TIMEOUT;
add_timer(&lp->cell_timer);
wv_nwid_filter(NWID_PROMISC,lp) ; /* Enter NWID promiscuous mode */
/* to build up a good WavePoint */
/* table... */
printk(KERN_DEBUG "WaveLAN: Roaming enabled on device %s\n",dev->name);
}
static void wv_roam_cleanup(struct net_device *dev)
{
wavepoint_history *ptr,*old_ptr;
net_local *lp= netdev_priv(dev);
printk(KERN_DEBUG "WaveLAN: Roaming Disabled on device %s\n",dev->name);
/* Fixme : maybe we should check that the timer exist before deleting it */
del_timer(&lp->cell_timer); /* Remove cell expiry timer */
ptr=lp->wavepoint_table.head; /* Clear device's WavePoint table */
while(ptr!=NULL)
{
old_ptr=ptr;
ptr=ptr->next;
wl_del_wavepoint(old_ptr,lp);
}
}
/* Enable/Disable NWID promiscuous mode on a given device */
static void wv_nwid_filter(unsigned char mode, net_local *lp)
{
mm_t m;
unsigned long flags;
#ifdef WAVELAN_ROAMING_DEBUG
printk(KERN_DEBUG "WaveLAN: NWID promisc %s, device %s\n",(mode==NWID_PROMISC) ? "on" : "off", lp->dev->name);
#endif
/* Disable interrupts & save flags */
spin_lock_irqsave(&lp->spinlock, flags);
m.w.mmw_loopt_sel = (mode==NWID_PROMISC) ? MMW_LOOPT_SEL_DIS_NWID : 0x00;
mmc_write(lp->dev->base_addr, (char *)&m.w.mmw_loopt_sel - (char *)&m, (unsigned char *)&m.w.mmw_loopt_sel, 1);
if(mode==NWID_PROMISC)
lp->cell_search=1;
else
lp->cell_search=0;
/* ReEnable interrupts & restore flags */
spin_unlock_irqrestore(&lp->spinlock, flags);
}
/* Find a record in the WavePoint table matching a given NWID */
static wavepoint_history *wl_roam_check(unsigned short nwid, net_local *lp)
{
wavepoint_history *ptr=lp->wavepoint_table.head;
while(ptr!=NULL){
if(ptr->nwid==nwid)
return ptr;
ptr=ptr->next;
}
return NULL;
}
/* Create a new wavepoint table entry */
static wavepoint_history *wl_new_wavepoint(unsigned short nwid, unsigned char seq, net_local* lp)
{
wavepoint_history *new_wavepoint;
#ifdef WAVELAN_ROAMING_DEBUG
printk(KERN_DEBUG "WaveLAN: New Wavepoint, NWID:%.4X\n",nwid);
#endif
if(lp->wavepoint_table.num_wavepoints==MAX_WAVEPOINTS)
return NULL;
new_wavepoint = kmalloc(sizeof(wavepoint_history),GFP_ATOMIC);
if(new_wavepoint==NULL)
return NULL;
new_wavepoint->nwid=nwid; /* New WavePoints NWID */
new_wavepoint->average_fast=0; /* Running Averages..*/
new_wavepoint->average_slow=0;
new_wavepoint->qualptr=0; /* Start of ringbuffer */
new_wavepoint->last_seq=seq-1; /* Last sequence no.seen */
memset(new_wavepoint->sigqual,0,WAVEPOINT_HISTORY);/* Empty ringbuffer */
new_wavepoint->next=lp->wavepoint_table.head;/* Add to wavepoint table */
new_wavepoint->prev=NULL;
if(lp->wavepoint_table.head!=NULL)
lp->wavepoint_table.head->prev=new_wavepoint;
lp->wavepoint_table.head=new_wavepoint;
lp->wavepoint_table.num_wavepoints++; /* no. of visible wavepoints */
return new_wavepoint;
}
/* Remove a wavepoint entry from WavePoint table */
static void wl_del_wavepoint(wavepoint_history *wavepoint, struct net_local *lp)
{
if(wavepoint==NULL)
return;
if(lp->curr_point==wavepoint)
lp->curr_point=NULL;
if(wavepoint->prev!=NULL)
wavepoint->prev->next=wavepoint->next;
if(wavepoint->next!=NULL)
wavepoint->next->prev=wavepoint->prev;
if(lp->wavepoint_table.head==wavepoint)
lp->wavepoint_table.head=wavepoint->next;
lp->wavepoint_table.num_wavepoints--;
kfree(wavepoint);
}
/* Timer callback function - checks WavePoint table for stale entries */
static void wl_cell_expiry(unsigned long data)
{
net_local *lp=(net_local *)data;
wavepoint_history *wavepoint=lp->wavepoint_table.head,*old_point;
#if WAVELAN_ROAMING_DEBUG > 1
printk(KERN_DEBUG "WaveLAN: Wavepoint timeout, dev %s\n",lp->dev->name);
#endif
if(lp->wavepoint_table.locked)
{
#if WAVELAN_ROAMING_DEBUG > 1
printk(KERN_DEBUG "WaveLAN: Wavepoint table locked...\n");
#endif
lp->cell_timer.expires=jiffies+1; /* If table in use, come back later */
add_timer(&lp->cell_timer);
return;
}
while(wavepoint!=NULL)
{
if(time_after(jiffies, wavepoint->last_seen + CELL_TIMEOUT))
{
#ifdef WAVELAN_ROAMING_DEBUG
printk(KERN_DEBUG "WaveLAN: Bye bye %.4X\n",wavepoint->nwid);
#endif
old_point=wavepoint;
wavepoint=wavepoint->next;
wl_del_wavepoint(old_point,lp);
}
else
wavepoint=wavepoint->next;
}
lp->cell_timer.expires=jiffies+CELL_TIMEOUT;
add_timer(&lp->cell_timer);
}
/* Update SNR history of a wavepoint */
static void wl_update_history(wavepoint_history *wavepoint, unsigned char sigqual, unsigned char seq)
{
int i=0,num_missed=0,ptr=0;
int average_fast=0,average_slow=0;
num_missed=(seq-wavepoint->last_seq)%WAVEPOINT_HISTORY;/* Have we missed
any beacons? */
if(num_missed)
for(i=0;i<num_missed;i++)
{
wavepoint->sigqual[wavepoint->qualptr++]=0; /* If so, enter them as 0's */
wavepoint->qualptr %=WAVEPOINT_HISTORY; /* in the ringbuffer. */
}
wavepoint->last_seen=jiffies; /* Add beacon to history */
wavepoint->last_seq=seq;
wavepoint->sigqual[wavepoint->qualptr++]=sigqual;
wavepoint->qualptr %=WAVEPOINT_HISTORY;
ptr=(wavepoint->qualptr-WAVEPOINT_FAST_HISTORY+WAVEPOINT_HISTORY)%WAVEPOINT_HISTORY;
for(i=0;i<WAVEPOINT_FAST_HISTORY;i++) /* Update running averages */
{
average_fast+=wavepoint->sigqual[ptr++];
ptr %=WAVEPOINT_HISTORY;
}
average_slow=average_fast;
for(i=WAVEPOINT_FAST_HISTORY;i<WAVEPOINT_HISTORY;i++)
{
average_slow+=wavepoint->sigqual[ptr++];
ptr %=WAVEPOINT_HISTORY;
}
wavepoint->average_fast=average_fast/WAVEPOINT_FAST_HISTORY;
wavepoint->average_slow=average_slow/WAVEPOINT_HISTORY;
}
/* Perform a handover to a new WavePoint */
static void wv_roam_handover(wavepoint_history *wavepoint, net_local *lp)
{
unsigned int base = lp->dev->base_addr;
mm_t m;
unsigned long flags;
if(wavepoint==lp->curr_point) /* Sanity check... */
{
wv_nwid_filter(!NWID_PROMISC,lp);
return;
}
#ifdef WAVELAN_ROAMING_DEBUG
printk(KERN_DEBUG "WaveLAN: Doing handover to %.4X, dev %s\n",wavepoint->nwid,lp->dev->name);
#endif
/* Disable interrupts & save flags */
spin_lock_irqsave(&lp->spinlock, flags);
m.w.mmw_netw_id_l = wavepoint->nwid & 0xFF;
m.w.mmw_netw_id_h = (wavepoint->nwid & 0xFF00) >> 8;
mmc_write(base, (char *)&m.w.mmw_netw_id_l - (char *)&m, (unsigned char *)&m.w.mmw_netw_id_l, 2);
/* ReEnable interrupts & restore flags */
spin_unlock_irqrestore(&lp->spinlock, flags);
wv_nwid_filter(!NWID_PROMISC,lp);
lp->curr_point=wavepoint;
}
/* Called when a WavePoint beacon is received */
static void wl_roam_gather(struct net_device * dev,
u_char * hdr, /* Beacon header */
u_char * stats) /* SNR, Signal quality
of packet */
{
wavepoint_beacon *beacon= (wavepoint_beacon *)hdr; /* Rcvd. Beacon */
unsigned short nwid=ntohs(beacon->nwid);
unsigned short sigqual=stats[2] & MMR_SGNL_QUAL; /* SNR of beacon */
wavepoint_history *wavepoint=NULL; /* WavePoint table entry */
net_local *lp = netdev_priv(dev); /* Device info */
#ifdef I_NEED_THIS_FEATURE
/* Some people don't need this, some other may need it */
nwid=nwid^ntohs(beacon->domain_id);
#endif
#if WAVELAN_ROAMING_DEBUG > 1
printk(KERN_DEBUG "WaveLAN: beacon, dev %s:\n",dev->name);
printk(KERN_DEBUG "Domain: %.4X NWID: %.4X SigQual=%d\n",ntohs(beacon->domain_id),nwid,sigqual);
#endif
lp->wavepoint_table.locked=1; /* <Mutex> */
wavepoint=wl_roam_check(nwid,lp); /* Find WavePoint table entry */
if(wavepoint==NULL) /* If no entry, Create a new one... */
{
wavepoint=wl_new_wavepoint(nwid,beacon->seq,lp);
if(wavepoint==NULL)
goto out;
}
if(lp->curr_point==NULL) /* If this is the only WavePoint, */
wv_roam_handover(wavepoint, lp); /* Jump on it! */
wl_update_history(wavepoint, sigqual, beacon->seq); /* Update SNR history
stats. */
if(lp->curr_point->average_slow < SEARCH_THRESH_LOW) /* If our current */
if(!lp->cell_search) /* WavePoint is getting faint, */
wv_nwid_filter(NWID_PROMISC,lp); /* start looking for a new one */
if(wavepoint->average_slow >
lp->curr_point->average_slow + WAVELAN_ROAMING_DELTA)
wv_roam_handover(wavepoint, lp); /* Handover to a better WavePoint */
if(lp->curr_point->average_slow > SEARCH_THRESH_HIGH) /* If our SNR is */
if(lp->cell_search) /* getting better, drop out of cell search mode */
wv_nwid_filter(!NWID_PROMISC,lp);
out:
lp->wavepoint_table.locked=0; /* </MUTEX> :-) */
}
/* Test this MAC frame a WavePoint beacon */
static inline int WAVELAN_BEACON(unsigned char *data)
{
wavepoint_beacon *beacon= (wavepoint_beacon *)data;
static const wavepoint_beacon beacon_template={0xaa,0xaa,0x03,0x08,0x00,0x0e,0x20,0x03,0x00};
if(memcmp(beacon,&beacon_template,9)==0)
return 1;
else
return 0;
}
#endif /* WAVELAN_ROAMING */
/************************ I82593 SUBROUTINES *************************/
/*
* Useful subroutines to manage the Ethernet controller
*/
/*------------------------------------------------------------------*/
/*
* Routine to synchronously send a command to the i82593 chip.
* Should be called with interrupts disabled.
* (called by wv_packet_write(), wv_ru_stop(), wv_ru_start(),
* wv_82593_config() & wv_diag())
*/
static int
wv_82593_cmd(struct net_device * dev,
char * str,
int cmd,
int result)
{
unsigned int base = dev->base_addr;
int status;
int wait_completed;
long spin;
/* Spin until the chip finishes executing its current command (if any) */
spin = 1000;
do
{
/* Time calibration of the loop */
udelay(10);
/* Read the interrupt register */
outb(OP0_NOP | CR0_STATUS_3, LCCR(base));
status = inb(LCSR(base));
}
while(((status & SR3_EXEC_STATE_MASK) != SR3_EXEC_IDLE) && (spin-- > 0));
/* If the interrupt hasn't be posted */
if(spin <= 0)
{
#ifdef DEBUG_INTERRUPT_ERROR
printk(KERN_INFO "wv_82593_cmd: %s timeout (previous command), status 0x%02x\n",
str, status);
#endif
return(FALSE);
}
/* Issue the command to the controller */
outb(cmd, LCCR(base));
/* If we don't have to check the result of the command
* Note : this mean that the irq handler will deal with that */
if(result == SR0_NO_RESULT)
return(TRUE);
/* We are waiting for command completion */
wait_completed = TRUE;
/* Busy wait while the LAN controller executes the command. */
spin = 1000;
do
{
/* Time calibration of the loop */
udelay(10);
/* Read the interrupt register */
outb(CR0_STATUS_0 | OP0_NOP, LCCR(base));
status = inb(LCSR(base));
/* Check if there was an interrupt posted */
if((status & SR0_INTERRUPT))
{
/* Acknowledge the interrupt */
outb(CR0_INT_ACK | OP0_NOP, LCCR(base));
/* Check if interrupt is a command completion */
if(((status & SR0_BOTH_RX_TX) != SR0_BOTH_RX_TX) &&
((status & SR0_BOTH_RX_TX) != 0x0) &&
!(status & SR0_RECEPTION))
{
/* Signal command completion */
wait_completed = FALSE;
}
else
{
/* Note : Rx interrupts will be handled later, because we can
* handle multiple Rx packets at once */
#ifdef DEBUG_INTERRUPT_INFO
printk(KERN_INFO "wv_82593_cmd: not our interrupt\n");
#endif
}
}
}
while(wait_completed && (spin-- > 0));
/* If the interrupt hasn't be posted */
if(wait_completed)
{
#ifdef DEBUG_INTERRUPT_ERROR
printk(KERN_INFO "wv_82593_cmd: %s timeout, status 0x%02x\n",
str, status);
#endif
return(FALSE);
}
/* Check the return code returned by the card (see above) against
* the expected return code provided by the caller */
if((status & SR0_EVENT_MASK) != result)
{
#ifdef DEBUG_INTERRUPT_ERROR
printk(KERN_INFO "wv_82593_cmd: %s failed, status = 0x%x\n",
str, status);
#endif
return(FALSE);
}
return(TRUE);
} /* wv_82593_cmd */
/*------------------------------------------------------------------*/
/*
* This routine does a 593 op-code number 7, and obtains the diagnose
* status for the WaveLAN.
*/
static inline int
wv_diag(struct net_device * dev)
{
return(wv_82593_cmd(dev, "wv_diag(): diagnose",
OP0_DIAGNOSE, SR0_DIAGNOSE_PASSED));
} /* wv_diag */
/*------------------------------------------------------------------*/
/*
* Routine to read len bytes from the i82593's ring buffer, starting at
* chip address addr. The results read from the chip are stored in buf.
* The return value is the address to use for next the call.
*/
static int
read_ringbuf(struct net_device * dev,
int addr,
char * buf,
int len)
{
unsigned int base = dev->base_addr;
int ring_ptr = addr;
int chunk_len;
char * buf_ptr = buf;
/* Get all the buffer */
while(len > 0)
{
/* Position the Program I/O Register at the ring buffer pointer */
outb(ring_ptr & 0xff, PIORL(base));
outb(((ring_ptr >> 8) & PIORH_MASK), PIORH(base));
/* First, determine how much we can read without wrapping around the
ring buffer */
if((addr + len) < (RX_BASE + RX_SIZE))
chunk_len = len;
else
chunk_len = RX_BASE + RX_SIZE - addr;
insb(PIOP(base), buf_ptr, chunk_len);
buf_ptr += chunk_len;
len -= chunk_len;
ring_ptr = (ring_ptr - RX_BASE + chunk_len) % RX_SIZE + RX_BASE;
}
return(ring_ptr);
} /* read_ringbuf */
/*------------------------------------------------------------------*/
/*
* Reconfigure the i82593, or at least ask for it...
* Because wv_82593_config use the transmission buffer, we must do it
* when we are sure that there is no transmission, so we do it now
* or in wavelan_packet_xmit() (I can't find any better place,
* wavelan_interrupt is not an option...), so you may experience
* some delay sometime...
*/
static void
wv_82593_reconfig(struct net_device * dev)
{
net_local * lp = netdev_priv(dev);
struct pcmcia_device * link = lp->link;
unsigned long flags;
/* Arm the flag, will be cleard in wv_82593_config() */
lp->reconfig_82593 = TRUE;
/* Check if we can do it now ! */
if((link->open) && (netif_running(dev)) && !(netif_queue_stopped(dev)))
{
spin_lock_irqsave(&lp->spinlock, flags); /* Disable interrupts */
wv_82593_config(dev);
spin_unlock_irqrestore(&lp->spinlock, flags); /* Re-enable interrupts */
}
else
{
#ifdef DEBUG_IOCTL_INFO
printk(KERN_DEBUG
"%s: wv_82593_reconfig(): delayed (state = %lX, link = %d)\n",
dev->name, dev->state, link->open);
#endif
}
}
/********************* DEBUG & INFO SUBROUTINES *********************/
/*
* This routines are used in the code to show debug informations.
* Most of the time, it dump the content of hardware structures...
*/
#ifdef DEBUG_PSA_SHOW
/*------------------------------------------------------------------*/
/*
* Print the formatted contents of the Parameter Storage Area.
*/
static void
wv_psa_show(psa_t * p)
{
DECLARE_MAC_BUF(mac);
printk(KERN_DEBUG "##### wavelan psa contents: #####\n");
printk(KERN_DEBUG "psa_io_base_addr_1: 0x%02X %02X %02X %02X\n",
p->psa_io_base_addr_1,
p->psa_io_base_addr_2,
p->psa_io_base_addr_3,
p->psa_io_base_addr_4);
printk(KERN_DEBUG "psa_rem_boot_addr_1: 0x%02X %02X %02X\n",
p->psa_rem_boot_addr_1,
p->psa_rem_boot_addr_2,
p->psa_rem_boot_addr_3);
printk(KERN_DEBUG "psa_holi_params: 0x%02x, ", p->psa_holi_params);
printk("psa_int_req_no: %d\n", p->psa_int_req_no);
#ifdef DEBUG_SHOW_UNUSED
printk(KERN_DEBUG "psa_unused0[]: %s\n",
print_mac(mac, p->psa_unused0));
#endif /* DEBUG_SHOW_UNUSED */
printk(KERN_DEBUG "psa_univ_mac_addr[]: %s\n",
print_mac(mac, p->psa_univ_mac_addr));
printk(KERN_DEBUG "psa_local_mac_addr[]: %s\n",
print_mac(mac, p->psa_local_mac_addr));
printk(KERN_DEBUG "psa_univ_local_sel: %d, ", p->psa_univ_local_sel);
printk("psa_comp_number: %d, ", p->psa_comp_number);
printk("psa_thr_pre_set: 0x%02x\n", p->psa_thr_pre_set);
printk(KERN_DEBUG "psa_feature_select/decay_prm: 0x%02x, ",
p->psa_feature_select);
printk("psa_subband/decay_update_prm: %d\n", p->psa_subband);
printk(KERN_DEBUG "psa_quality_thr: 0x%02x, ", p->psa_quality_thr);
printk("psa_mod_delay: 0x%02x\n", p->psa_mod_delay);
printk(KERN_DEBUG "psa_nwid: 0x%02x%02x, ", p->psa_nwid[0], p->psa_nwid[1]);
printk("psa_nwid_select: %d\n", p->psa_nwid_select);
printk(KERN_DEBUG "psa_encryption_select: %d, ", p->psa_encryption_select);
printk("psa_encryption_key[]: %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
p->psa_encryption_key[0],
p->psa_encryption_key[1],
p->psa_encryption_key[2],
p->psa_encryption_key[3],
p->psa_encryption_key[4],
p->psa_encryption_key[5],
p->psa_encryption_key[6],
p->psa_encryption_key[7]);
printk(KERN_DEBUG "psa_databus_width: %d\n", p->psa_databus_width);
printk(KERN_DEBUG "psa_call_code/auto_squelch: 0x%02x, ",
p->psa_call_code[0]);
printk("psa_call_code[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
p->psa_call_code[0],
p->psa_call_code[1],
p->psa_call_code[2],
p->psa_call_code[3],
p->psa_call_code[4],
p->psa_call_code[5],
p->psa_call_code[6],
p->psa_call_code[7]);
#ifdef DEBUG_SHOW_UNUSED
printk(KERN_DEBUG "psa_reserved[]: %02X:%02X\n",
p->psa_reserved[0],
p->psa_reserved[1]);
#endif /* DEBUG_SHOW_UNUSED */
printk(KERN_DEBUG "psa_conf_status: %d, ", p->psa_conf_status);
printk("psa_crc: 0x%02x%02x, ", p->psa_crc[0], p->psa_crc[1]);
printk("psa_crc_status: 0x%02x\n", p->psa_crc_status);
} /* wv_psa_show */
#endif /* DEBUG_PSA_SHOW */
#ifdef DEBUG_MMC_SHOW
/*------------------------------------------------------------------*/
/*
* Print the formatted status of the Modem Management Controller.
* This function need to be completed...
*/
static void
wv_mmc_show(struct net_device * dev)
{
unsigned int base = dev->base_addr;
net_local * lp = netdev_priv(dev);
mmr_t m;
/* Basic check */
if(hasr_read(base) & HASR_NO_CLK)
{
printk(KERN_WARNING "%s: wv_mmc_show: modem not connected\n",
dev->name);
return;
}
spin_lock_irqsave(&lp->spinlock, flags);
/* Read the mmc */
mmc_out(base, mmwoff(0, mmw_freeze), 1);
mmc_read(base, 0, (u_char *)&m, sizeof(m));
mmc_out(base, mmwoff(0, mmw_freeze), 0);
/* Don't forget to update statistics */
lp->wstats.discard.nwid += (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l;
spin_unlock_irqrestore(&lp->spinlock, flags);
printk(KERN_DEBUG "##### wavelan modem status registers: #####\n");
#ifdef DEBUG_SHOW_UNUSED
printk(KERN_DEBUG "mmc_unused0[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
m.mmr_unused0[0],
m.mmr_unused0[1],
m.mmr_unused0[2],
m.mmr_unused0[3],
m.mmr_unused0[4],
m.mmr_unused0[5],
m.mmr_unused0[6],
m.mmr_unused0[7]);
#endif /* DEBUG_SHOW_UNUSED */
printk(KERN_DEBUG "Encryption algorithm: %02X - Status: %02X\n",
m.mmr_des_avail, m.mmr_des_status);
#ifdef DEBUG_SHOW_UNUSED
printk(KERN_DEBUG "mmc_unused1[]: %02X:%02X:%02X:%02X:%02X\n",
m.mmr_unused1[0],
m.mmr_unused1[1],
m.mmr_unused1[2],
m.mmr_unused1[3],
m.mmr_unused1[4]);
#endif /* DEBUG_SHOW_UNUSED */
printk(KERN_DEBUG "dce_status: 0x%x [%s%s%s%s]\n",
m.mmr_dce_status,
(m.mmr_dce_status & MMR_DCE_STATUS_RX_BUSY) ? "energy detected,":"",
(m.mmr_dce_status & MMR_DCE_STATUS_LOOPT_IND) ?
"loop test indicated," : "",
(m.mmr_dce_status & MMR_DCE_STATUS_TX_BUSY) ? "transmitter on," : "",
(m.mmr_dce_status & MMR_DCE_STATUS_JBR_EXPIRED) ?
"jabber timer expired," : "");
printk(KERN_DEBUG "Dsp ID: %02X\n",
m.mmr_dsp_id);
#ifdef DEBUG_SHOW_UNUSED
printk(KERN_DEBUG "mmc_unused2[]: %02X:%02X\n",
m.mmr_unused2[0],
m.mmr_unused2[1]);
#endif /* DEBUG_SHOW_UNUSED */
printk(KERN_DEBUG "# correct_nwid: %d, # wrong_nwid: %d\n",
(m.mmr_correct_nwid_h << 8) | m.mmr_correct_nwid_l,
(m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l);
printk(KERN_DEBUG "thr_pre_set: 0x%x [current signal %s]\n",
m.mmr_thr_pre_set & MMR_THR_PRE_SET,
(m.mmr_thr_pre_set & MMR_THR_PRE_SET_CUR) ? "above" : "below");
printk(KERN_DEBUG "signal_lvl: %d [%s], ",
m.mmr_signal_lvl & MMR_SIGNAL_LVL,
(m.mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) ? "new msg" : "no new msg");
printk("silence_lvl: %d [%s], ", m.mmr_silence_lvl & MMR_SILENCE_LVL,
(m.mmr_silence_lvl & MMR_SILENCE_LVL_VALID) ? "update done" : "no new update");
printk("sgnl_qual: 0x%x [%s]\n", m.mmr_sgnl_qual & MMR_SGNL_QUAL,
(m.mmr_sgnl_qual & MMR_SGNL_QUAL_ANT) ? "Antenna 1" : "Antenna 0");
#ifdef DEBUG_SHOW_UNUSED
printk(KERN_DEBUG "netw_id_l: %x\n", m.mmr_netw_id_l);
#endif /* DEBUG_SHOW_UNUSED */
} /* wv_mmc_show */
#endif /* DEBUG_MMC_SHOW */
#ifdef DEBUG_I82593_SHOW
/*------------------------------------------------------------------*/
/*
* Print the formatted status of the i82593's receive unit.
*/
static void
wv_ru_show(struct net_device * dev)
{
net_local *lp = netdev_priv(dev);
printk(KERN_DEBUG "##### wavelan i82593 receiver status: #####\n");
printk(KERN_DEBUG "ru: rfp %d stop %d", lp->rfp, lp->stop);
/*
* Not implemented yet...
*/
printk("\n");
} /* wv_ru_show */
#endif /* DEBUG_I82593_SHOW */
#ifdef DEBUG_DEVICE_SHOW
/*------------------------------------------------------------------*/
/*
* Print the formatted status of the WaveLAN PCMCIA device driver.
*/
static void
wv_dev_show(struct net_device * dev)
{
printk(KERN_DEBUG "dev:");
printk(" state=%lX,", dev->state);
printk(" trans_start=%ld,", dev->trans_start);
printk(" flags=0x%x,", dev->flags);
printk("\n");
} /* wv_dev_show */
/*------------------------------------------------------------------*/
/*
* Print the formatted status of the WaveLAN PCMCIA device driver's
* private information.
*/
static void
wv_local_show(struct net_device * dev)
{
net_local *lp = netdev_priv(dev);
printk(KERN_DEBUG "local:");
/*
* Not implemented yet...
*/
printk("\n");
} /* wv_local_show */
#endif /* DEBUG_DEVICE_SHOW */
#if defined(DEBUG_RX_INFO) || defined(DEBUG_TX_INFO)
/*------------------------------------------------------------------*/
/*
* Dump packet header (and content if necessary) on the screen
*/
static void
wv_packet_info(u_char * p, /* Packet to dump */
int length, /* Length of the packet */
char * msg1, /* Name of the device */
char * msg2) /* Name of the function */
{
int i;
int maxi;
DECLARE_MAC_BUF(mac);
printk(KERN_DEBUG "%s: %s(): dest %s, length %d\n",
msg1, msg2, print_mac(mac, p), length);
printk(KERN_DEBUG "%s: %s(): src %s, type 0x%02X%02X\n",
msg1, msg2, print_mac(mac, &p[6]), p[12], p[13]);
#ifdef DEBUG_PACKET_DUMP
printk(KERN_DEBUG "data=\"");
if((maxi = length) > DEBUG_PACKET_DUMP)
maxi = DEBUG_PACKET_DUMP;
for(i = 14; i < maxi; i++)
if(p[i] >= ' ' && p[i] <= '~')
printk(" %c", p[i]);
else
printk("%02X", p[i]);
if(maxi < length)
printk("..");
printk("\"\n");
printk(KERN_DEBUG "\n");
#endif /* DEBUG_PACKET_DUMP */
}
#endif /* defined(DEBUG_RX_INFO) || defined(DEBUG_TX_INFO) */
/*------------------------------------------------------------------*/
/*
* This is the information which is displayed by the driver at startup
* There is a lot of flag to configure it at your will...
*/
static void
wv_init_info(struct net_device * dev)
{
unsigned int base = dev->base_addr;
psa_t psa;
DECLARE_MAC_BUF(mac);
/* Read the parameter storage area */
psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa));
#ifdef DEBUG_PSA_SHOW
wv_psa_show(&psa);
#endif
#ifdef DEBUG_MMC_SHOW
wv_mmc_show(dev);
#endif
#ifdef DEBUG_I82593_SHOW
wv_ru_show(dev);
#endif
#ifdef DEBUG_BASIC_SHOW
/* Now, let's go for the basic stuff */
printk(KERN_NOTICE "%s: WaveLAN: port %#x, irq %d, "
"hw_addr %s",
dev->name, base, dev->irq,
print_mac(mac, dev->dev_addr));
/* Print current network id */
if(psa.psa_nwid_select)
printk(", nwid 0x%02X-%02X", psa.psa_nwid[0], psa.psa_nwid[1]);
else
printk(", nwid off");
/* If 2.00 card */
if(!(mmc_in(base, mmroff(0, mmr_fee_status)) &
(MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY)))
{
unsigned short freq;
/* Ask the EEprom to read the frequency from the first area */
fee_read(base, 0x00 /* 1st area - frequency... */,
&freq, 1);
/* Print frequency */
printk(", 2.00, %ld", (freq >> 6) + 2400L);
/* Hack !!! */
if(freq & 0x20)
printk(".5");
}
else
{
printk(", PCMCIA, ");
switch (psa.psa_subband)
{
case PSA_SUBBAND_915:
printk("915");
break;
case PSA_SUBBAND_2425:
printk("2425");
break;
case PSA_SUBBAND_2460:
printk("2460");
break;
case PSA_SUBBAND_2484:
printk("2484");
break;
case PSA_SUBBAND_2430_5:
printk("2430.5");
break;
default:
printk("unknown");
}
}
printk(" MHz\n");
#endif /* DEBUG_BASIC_SHOW */
#ifdef DEBUG_VERSION_SHOW
/* Print version information */
printk(KERN_NOTICE "%s", version);
#endif
} /* wv_init_info */
/********************* IOCTL, STATS & RECONFIG *********************/
/*
* We found here routines that are called by Linux on differents
* occasions after the configuration and not for transmitting data
* These may be called when the user use ifconfig, /proc/net/dev
* or wireless extensions
*/
/*------------------------------------------------------------------*/
/*
* Get the current ethernet statistics. This may be called with the
* card open or closed.
* Used when the user read /proc/net/dev
*/
static en_stats *
wavelan_get_stats(struct net_device * dev)
{
#ifdef DEBUG_IOCTL_TRACE
printk(KERN_DEBUG "%s: <>wavelan_get_stats()\n", dev->name);
#endif
return(&((net_local *)netdev_priv(dev))->stats);
}
/*------------------------------------------------------------------*/
/*
* Set or clear the multicast filter for this adaptor.
* num_addrs == -1 Promiscuous mode, receive all packets
* num_addrs == 0 Normal mode, clear multicast list
* num_addrs > 0 Multicast mode, receive normal and MC packets,
* and do best-effort filtering.
*/
static void
wavelan_set_multicast_list(struct net_device * dev)
{
net_local * lp = netdev_priv(dev);
#ifdef DEBUG_IOCTL_TRACE
printk(KERN_DEBUG "%s: ->wavelan_set_multicast_list()\n", dev->name);
#endif
#ifdef DEBUG_IOCTL_INFO
printk(KERN_DEBUG "%s: wavelan_set_multicast_list(): setting Rx mode %02X to %d addresses.\n",
dev->name, dev->flags, dev->mc_count);
#endif
if(dev->flags & IFF_PROMISC)
{
/*
* Enable promiscuous mode: receive all packets.
*/
if(!lp->promiscuous)
{
lp->promiscuous = 1;
lp->allmulticast = 0;
lp->mc_count = 0;
wv_82593_reconfig(dev);
}
}
else
/* If all multicast addresses
* or too much multicast addresses for the hardware filter */
if((dev->flags & IFF_ALLMULTI) ||
(dev->mc_count > I82593_MAX_MULTICAST_ADDRESSES))
{
/*
* Disable promiscuous mode, but active the all multicast mode
*/
if(!lp->allmulticast)
{
lp->promiscuous = 0;
lp->allmulticast = 1;
lp->mc_count = 0;
wv_82593_reconfig(dev);
}
}
else
/* If there is some multicast addresses to send */
if(dev->mc_list != (struct dev_mc_list *) NULL)
{
/*
* Disable promiscuous mode, but receive all packets
* in multicast list
*/
#ifdef MULTICAST_AVOID
if(lp->promiscuous || lp->allmulticast ||
(dev->mc_count != lp->mc_count))
#endif
{
lp->promiscuous = 0;
lp->allmulticast = 0;
lp->mc_count = dev->mc_count;
wv_82593_reconfig(dev);
}
}
else
{
/*
* Switch to normal mode: disable promiscuous mode and
* clear the multicast list.
*/
if(lp->promiscuous || lp->mc_count == 0)
{
lp->promiscuous = 0;
lp->allmulticast = 0;
lp->mc_count = 0;
wv_82593_reconfig(dev);
}
}
#ifdef DEBUG_IOCTL_TRACE
printk(KERN_DEBUG "%s: <-wavelan_set_multicast_list()\n", dev->name);
#endif
}
/*------------------------------------------------------------------*/
/*
* This function doesn't exist...
* (Note : it was a nice way to test the reconfigure stuff...)
*/
#ifdef SET_MAC_ADDRESS
static int
wavelan_set_mac_address(struct net_device * dev,
void * addr)
{
struct sockaddr * mac = addr;
/* Copy the address */
memcpy(dev->dev_addr, mac->sa_data, WAVELAN_ADDR_SIZE);
/* Reconfig the beast */
wv_82593_reconfig(dev);
return 0;
}
#endif /* SET_MAC_ADDRESS */
/*------------------------------------------------------------------*/
/*
* Frequency setting (for hardware able of it)
* It's a bit complicated and you don't really want to look into it...
*/
static int
wv_set_frequency(u_long base, /* i/o port of the card */
iw_freq * frequency)
{
const int BAND_NUM = 10; /* Number of bands */
long freq = 0L; /* offset to 2.4 GHz in .5 MHz */
#ifdef DEBUG_IOCTL_INFO
int i;
#endif
/* Setting by frequency */
/* Theoritically, you may set any frequency between
* the two limits with a 0.5 MHz precision. In practice,
* I don't want you to have trouble with local
* regulations... */
if((frequency->e == 1) &&
(frequency->m >= (int) 2.412e8) && (frequency->m <= (int) 2.487e8))
{
freq = ((frequency->m / 10000) - 24000L) / 5;
}
/* Setting by channel (same as wfreqsel) */
/* Warning : each channel is 22MHz wide, so some of the channels
* will interfere... */
if((frequency->e == 0) &&
(frequency->m >= 0) && (frequency->m < BAND_NUM))
{
/* Get frequency offset. */
freq = channel_bands[frequency->m] >> 1;
}
/* Verify if the frequency is allowed */
if(freq != 0L)
{
u_short table[10]; /* Authorized frequency table */
/* Read the frequency table */
fee_read(base, 0x71 /* frequency table */,
table, 10);
#ifdef DEBUG_IOCTL_INFO
printk(KERN_DEBUG "Frequency table :");
for(i = 0; i < 10; i++)
{
printk(" %04X",
table[i]);
}
printk("\n");
#endif
/* Look in the table if the frequency is allowed */
if(!(table[9 - ((freq - 24) / 16)] &
(1 << ((freq - 24) % 16))))
return -EINVAL; /* not allowed */
}
else
return -EINVAL;
/* If we get a usable frequency */
if(freq != 0L)
{
unsigned short area[16];
unsigned short dac[2];
unsigned short area_verify[16];
unsigned short dac_verify[2];
/* Corresponding gain (in the power adjust value table)
* see AT&T Wavelan Data Manual, REF 407-024689/E, page 3-8
* & WCIN062D.DOC, page 6.2.9 */
unsigned short power_limit[] = { 40, 80, 120, 160, 0 };
int power_band = 0; /* Selected band */
unsigned short power_adjust; /* Correct value */
/* Search for the gain */
power_band = 0;
while((freq > power_limit[power_band]) &&
(power_limit[++power_band] != 0))
;
/* Read the first area */
fee_read(base, 0x00,
area, 16);
/* Read the DAC */
fee_read(base, 0x60,
dac, 2);
/* Read the new power adjust value */
fee_read(base, 0x6B - (power_band >> 1),
&power_adjust, 1);
if(power_band & 0x1)
power_adjust >>= 8;
else
power_adjust &= 0xFF;
#ifdef DEBUG_IOCTL_INFO
printk(KERN_DEBUG "Wavelan EEprom Area 1 :");
for(i = 0; i < 16; i++)
{
printk(" %04X",
area[i]);
}
printk("\n");
printk(KERN_DEBUG "Wavelan EEprom DAC : %04X %04X\n",
dac[0], dac[1]);
#endif
/* Frequency offset (for info only...) */
area[0] = ((freq << 5) & 0xFFE0) | (area[0] & 0x1F);
/* Receiver Principle main divider coefficient */
area[3] = (freq >> 1) + 2400L - 352L;
area[2] = ((freq & 0x1) << 4) | (area[2] & 0xFFEF);
/* Transmitter Main divider coefficient */
area[13] = (freq >> 1) + 2400L;
area[12] = ((freq & 0x1) << 4) | (area[2] & 0xFFEF);
/* Others part of the area are flags, bit streams or unused... */
/* Set the value in the DAC */
dac[1] = ((power_adjust >> 1) & 0x7F) | (dac[1] & 0xFF80);
dac[0] = ((power_adjust & 0x1) << 4) | (dac[0] & 0xFFEF);
/* Write the first area */
fee_write(base, 0x00,
area, 16);
/* Write the DAC */
fee_write(base, 0x60,
dac, 2);
/* We now should verify here that the EEprom writing was ok */
/* ReRead the first area */
fee_read(base, 0x00,
area_verify, 16);
/* ReRead the DAC */
fee_read(base, 0x60,
dac_verify, 2);
/* Compare */
if(memcmp(area, area_verify, 16 * 2) ||
memcmp(dac, dac_verify, 2 * 2))
{
#ifdef DEBUG_IOCTL_ERROR
printk(KERN_INFO "Wavelan: wv_set_frequency : unable to write new frequency to EEprom (?)\n");
#endif
return -EOPNOTSUPP;
}
/* We must download the frequency parameters to the
* synthetisers (from the EEprom - area 1)
* Note : as the EEprom is auto decremented, we set the end
* if the area... */
mmc_out(base, mmwoff(0, mmw_fee_addr), 0x0F);
mmc_out(base, mmwoff(0, mmw_fee_ctrl),
MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD);
/* Wait until the download is finished */
fee_wait(base, 100, 100);
/* We must now download the power adjust value (gain) to
* the synthetisers (from the EEprom - area 7 - DAC) */
mmc_out(base, mmwoff(0, mmw_fee_addr), 0x61);
mmc_out(base, mmwoff(0, mmw_fee_ctrl),
MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD);
/* Wait until the download is finished */
fee_wait(base, 100, 100);
#ifdef DEBUG_IOCTL_INFO
/* Verification of what we have done... */
printk(KERN_DEBUG "Wavelan EEprom Area 1 :");
for(i = 0; i < 16; i++)
{
printk(" %04X",
area_verify[i]);
}
printk("\n");
printk(KERN_DEBUG "Wavelan EEprom DAC : %04X %04X\n",
dac_verify[0], dac_verify[1]);
#endif
return 0;
}
else
return -EINVAL; /* Bah, never get there... */
}
/*------------------------------------------------------------------*/
/*
* Give the list of available frequencies
*/
static int
wv_frequency_list(u_long base, /* i/o port of the card */
iw_freq * list, /* List of frequency to fill */
int max) /* Maximum number of frequencies */
{
u_short table[10]; /* Authorized frequency table */
long freq = 0L; /* offset to 2.4 GHz in .5 MHz + 12 MHz */
int i; /* index in the table */
const int BAND_NUM = 10; /* Number of bands */
int c = 0; /* Channel number */
/* Read the frequency table */
fee_read(base, 0x71 /* frequency table */,
table, 10);
/* Look all frequencies */
i = 0;
for(freq = 0; freq < 150; freq++)
/* Look in the table if the frequency is allowed */
if(table[9 - (freq / 16)] & (1 << (freq % 16)))
{
/* Compute approximate channel number */
while((((channel_bands[c] >> 1) - 24) < freq) &&
(c < BAND_NUM))
c++;
list[i].i = c; /* Set the list index */
/* put in the list */
list[i].m = (((freq + 24) * 5) + 24000L) * 10000;
list[i++].e = 1;
/* Check number */
if(i >= max)
return(i);
}
return(i);
}
#ifdef IW_WIRELESS_SPY
/*------------------------------------------------------------------*/
/*
* Gather wireless spy statistics : for each packet, compare the source
* address with out list, and if match, get the stats...
* Sorry, but this function really need wireless extensions...
*/
static inline void
wl_spy_gather(struct net_device * dev,
u_char * mac, /* MAC address */
u_char * stats) /* Statistics to gather */
{
struct iw_quality wstats;
wstats.qual = stats[2] & MMR_SGNL_QUAL;
wstats.level = stats[0] & MMR_SIGNAL_LVL;
wstats.noise = stats[1] & MMR_SILENCE_LVL;
wstats.updated = 0x7;
/* Update spy records */
wireless_spy_update(dev, mac, &wstats);
}
#endif /* IW_WIRELESS_SPY */
#ifdef HISTOGRAM
/*------------------------------------------------------------------*/
/*
* This function calculate an histogram on the signal level.
* As the noise is quite constant, it's like doing it on the SNR.
* We have defined a set of interval (lp->his_range), and each time
* the level goes in that interval, we increment the count (lp->his_sum).
* With this histogram you may detect if one wavelan is really weak,
* or you may also calculate the mean and standard deviation of the level...
*/
static inline void
wl_his_gather(struct net_device * dev,
u_char * stats) /* Statistics to gather */
{
net_local * lp = netdev_priv(dev);
u_char level = stats[0] & MMR_SIGNAL_LVL;
int i;
/* Find the correct interval */
i = 0;
while((i < (lp->his_number - 1)) && (level >= lp->his_range[i++]))
;
/* Increment interval counter */
(lp->his_sum[i])++;
}
#endif /* HISTOGRAM */
static void wl_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
{
strncpy(info->driver, "wavelan_cs", sizeof(info->driver)-1);
}
static const struct ethtool_ops ops = {
.get_drvinfo = wl_get_drvinfo
};
/*------------------------------------------------------------------*/
/*
* Wireless Handler : get protocol name
*/
static int wavelan_get_name(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu,
char *extra)
{
strcpy(wrqu->name, "WaveLAN");
return 0;
}
/*------------------------------------------------------------------*/
/*
* Wireless Handler : set NWID
*/
static int wavelan_set_nwid(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu,
char *extra)
{
unsigned int base = dev->base_addr;
net_local *lp = netdev_priv(dev);
psa_t psa;
mm_t m;
unsigned long flags;
int ret = 0;
/* Disable interrupts and save flags. */
spin_lock_irqsave(&lp->spinlock, flags);
/* Set NWID in WaveLAN. */
if (!wrqu->nwid.disabled) {
/* Set NWID in psa */
psa.psa_nwid[0] = (wrqu->nwid.value & 0xFF00) >> 8;
psa.psa_nwid[1] = wrqu->nwid.value & 0xFF;
psa.psa_nwid_select = 0x01;
psa_write(dev,
(char *) psa.psa_nwid - (char *) &psa,
(unsigned char *) psa.psa_nwid, 3);
/* Set NWID in mmc. */
m.w.mmw_netw_id_l = psa.psa_nwid[1];
m.w.mmw_netw_id_h = psa.psa_nwid[0];
mmc_write(base,
(char *) &m.w.mmw_netw_id_l -
(char *) &m,
(unsigned char *) &m.w.mmw_netw_id_l, 2);
mmc_out(base, mmwoff(0, mmw_loopt_sel), 0x00);
} else {
/* Disable NWID in the psa. */
psa.psa_nwid_select = 0x00;
psa_write(dev,
(char *) &psa.psa_nwid_select -
(char *) &psa,
(unsigned char *) &psa.psa_nwid_select,
1);
/* Disable NWID in the mmc (no filtering). */
mmc_out(base, mmwoff(0, mmw_loopt_sel),
MMW_LOOPT_SEL_DIS_NWID);
}
/* update the Wavelan checksum */
update_psa_checksum(dev);
/* Enable interrupts and restore flags. */
spin_unlock_irqrestore(&lp->spinlock, flags);
return ret;
}
/*------------------------------------------------------------------*/
/*
* Wireless Handler : get NWID
*/
static int wavelan_get_nwid(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu,
char *extra)
{
net_local *lp = netdev_priv(dev);
psa_t psa;
unsigned long flags;
int ret = 0;
/* Disable interrupts and save flags. */
spin_lock_irqsave(&lp->spinlock, flags);
/* Read the NWID. */
psa_read(dev,
(char *) psa.psa_nwid - (char *) &psa,
(unsigned char *) psa.psa_nwid, 3);
wrqu->nwid.value = (psa.psa_nwid[0] << 8) + psa.psa_nwid[1];
wrqu->nwid.disabled = !(psa.psa_nwid_select);
wrqu->nwid.fixed = 1; /* Superfluous */
/* Enable interrupts and restore flags. */
spin_unlock_irqrestore(&lp->spinlock, flags);
return ret;
}
/*------------------------------------------------------------------*/
/*
* Wireless Handler : set frequency
*/
static int wavelan_set_freq(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu,
char *extra)
{
unsigned int base = dev->base_addr;
net_local *lp = netdev_priv(dev);
unsigned long flags;
int ret;
/* Disable interrupts and save flags. */
spin_lock_irqsave(&lp->spinlock, flags);
/* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable). */
if (!(mmc_in(base, mmroff(0, mmr_fee_status)) &
(MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY)))
ret = wv_set_frequency(base, &(wrqu->freq));
else
ret = -EOPNOTSUPP;
/* Enable interrupts and restore flags. */
spin_unlock_irqrestore(&lp->spinlock, flags);
return ret;
}
/*------------------------------------------------------------------*/
/*
* Wireless Handler : get frequency
*/
static int wavelan_get_freq(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu,
char *extra)
{
unsigned int base = dev->base_addr;
net_local *lp = netdev_priv(dev);
psa_t psa;
unsigned long flags;
int ret = 0;
/* Disable interrupts and save flags. */
spin_lock_irqsave(&lp->spinlock, flags);
/* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable).
* Does it work for everybody, especially old cards? */
if (!(mmc_in(base, mmroff(0, mmr_fee_status)) &
(MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) {
unsigned short freq;
/* Ask the EEPROM to read the frequency from the first area. */
fee_read(base, 0x00, &freq, 1);
wrqu->freq.m = ((freq >> 5) * 5 + 24000L) * 10000;
wrqu->freq.e = 1;
} else {
psa_read(dev,
(char *) &psa.psa_subband - (char *) &psa,
(unsigned char *) &psa.psa_subband, 1);
if (psa.psa_subband <= 4) {
wrqu->freq.m = fixed_bands[psa.psa_subband];
wrqu->freq.e = (psa.psa_subband != 0);
} else
ret = -EOPNOTSUPP;
}
/* Enable interrupts and restore flags. */
spin_unlock_irqrestore(&lp->spinlock, flags);
return ret;
}
/*------------------------------------------------------------------*/
/*
* Wireless Handler : set level threshold
*/
static int wavelan_set_sens(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu,
char *extra)
{
unsigned int base = dev->base_addr;
net_local *lp = netdev_priv(dev);
psa_t psa;
unsigned long flags;
int ret = 0;
/* Disable interrupts and save flags. */
spin_lock_irqsave(&lp->spinlock, flags);
/* Set the level threshold. */
/* We should complain loudly if wrqu->sens.fixed = 0, because we
* can't set auto mode... */
psa.psa_thr_pre_set = wrqu->sens.value & 0x3F;
psa_write(dev,
(char *) &psa.psa_thr_pre_set - (char *) &psa,
(unsigned char *) &psa.psa_thr_pre_set, 1);
/* update the Wavelan checksum */
update_psa_checksum(dev);
mmc_out(base, mmwoff(0, mmw_thr_pre_set),
psa.psa_thr_pre_set);
/* Enable interrupts and restore flags. */
spin_unlock_irqrestore(&lp->spinlock, flags);
return ret;
}
/*------------------------------------------------------------------*/
/*
* Wireless Handler : get level threshold
*/
static int wavelan_get_sens(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu,
char *extra)
{
net_local *lp = netdev_priv(dev);
psa_t psa;
unsigned long flags;
int ret = 0;
/* Disable interrupts and save flags. */
spin_lock_irqsave(&lp->spinlock, flags);
/* Read the level threshold. */
psa_read(dev,
(char *) &psa.psa_thr_pre_set - (char *) &psa,
(unsigned char *) &psa.psa_thr_pre_set, 1);
wrqu->sens.value = psa.psa_thr_pre_set & 0x3F;
wrqu->sens.fixed = 1;
/* Enable interrupts and restore flags. */
spin_unlock_irqrestore(&lp->spinlock, flags);
return ret;
}
/*------------------------------------------------------------------*/
/*
* Wireless Handler : set encryption key
*/
static int wavelan_set_encode(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu,
char *extra)
{
unsigned int base = dev->base_addr;
net_local *lp = netdev_priv(dev);
unsigned long flags;
psa_t psa;
int ret = 0;
/* Disable interrupts and save flags. */
spin_lock_irqsave(&lp->spinlock, flags);
/* Check if capable of encryption */
if (!mmc_encr(base)) {
ret = -EOPNOTSUPP;
}
/* Check the size of the key */
if((wrqu->encoding.length != 8) && (wrqu->encoding.length != 0)) {
ret = -EINVAL;
}
if(!ret) {
/* Basic checking... */
if (wrqu->encoding.length == 8) {
/* Copy the key in the driver */
memcpy(psa.psa_encryption_key, extra,
wrqu->encoding.length);
psa.psa_encryption_select = 1;
psa_write(dev,
(char *) &psa.psa_encryption_select -
(char *) &psa,
(unsigned char *) &psa.
psa_encryption_select, 8 + 1);
mmc_out(base, mmwoff(0, mmw_encr_enable),
MMW_ENCR_ENABLE_EN | MMW_ENCR_ENABLE_MODE);
mmc_write(base, mmwoff(0, mmw_encr_key),
(unsigned char *) &psa.
psa_encryption_key, 8);
}
/* disable encryption */
if (wrqu->encoding.flags & IW_ENCODE_DISABLED) {
psa.psa_encryption_select = 0;
psa_write(dev,
(char *) &psa.psa_encryption_select -
(char *) &psa,
(unsigned char *) &psa.
psa_encryption_select, 1);
mmc_out(base, mmwoff(0, mmw_encr_enable), 0);
}
/* update the Wavelan checksum */
update_psa_checksum(dev);
}
/* Enable interrupts and restore flags. */
spin_unlock_irqrestore(&lp->spinlock, flags);
return ret;
}
/*------------------------------------------------------------------*/
/*
* Wireless Handler : get encryption key
*/
static int wavelan_get_encode(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu,
char *extra)
{
unsigned int base = dev->base_addr;
net_local *lp = netdev_priv(dev);
psa_t psa;
unsigned long flags;
int ret = 0;
/* Disable interrupts and save flags. */
spin_lock_irqsave(&lp->spinlock, flags);
/* Check if encryption is available */
if (!mmc_encr(base)) {
ret = -EOPNOTSUPP;
} else {
/* Read the encryption key */
psa_read(dev,
(char *) &psa.psa_encryption_select -
(char *) &psa,
(unsigned char *) &psa.
psa_encryption_select, 1 + 8);
/* encryption is enabled ? */
if (psa.psa_encryption_select)
wrqu->encoding.flags = IW_ENCODE_ENABLED;
else
wrqu->encoding.flags = IW_ENCODE_DISABLED;
wrqu->encoding.flags |= mmc_encr(base);
/* Copy the key to the user buffer */
wrqu->encoding.length = 8;
memcpy(extra, psa.psa_encryption_key, wrqu->encoding.length);
}
/* Enable interrupts and restore flags. */
spin_unlock_irqrestore(&lp->spinlock, flags);
return ret;
}
#ifdef WAVELAN_ROAMING_EXT
/*------------------------------------------------------------------*/
/*
* Wireless Handler : set ESSID (domain)
*/
static int wavelan_set_essid(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu,
char *extra)
{
net_local *lp = netdev_priv(dev);
unsigned long flags;
int ret = 0;
/* Disable interrupts and save flags. */
spin_lock_irqsave(&lp->spinlock, flags);
/* Check if disable */
if(wrqu->data.flags == 0)
lp->filter_domains = 0;
else {
char essid[IW_ESSID_MAX_SIZE + 1];
char * endp;
/* Terminate the string */
memcpy(essid, extra, wrqu->data.length);
essid[IW_ESSID_MAX_SIZE] = '\0';
#ifdef DEBUG_IOCTL_INFO
printk(KERN_DEBUG "SetEssid : ``%s''\n", essid);
#endif /* DEBUG_IOCTL_INFO */
/* Convert to a number (note : Wavelan specific) */
lp->domain_id = simple_strtoul(essid, &endp, 16);
/* Has it worked ? */
if(endp > essid)
lp->filter_domains = 1;
else {
lp->filter_domains = 0;
ret = -EINVAL;
}
}
/* Enable interrupts and restore flags. */
spin_unlock_irqrestore(&lp->spinlock, flags);
return ret;
}
/*------------------------------------------------------------------*/
/*
* Wireless Handler : get ESSID (domain)
*/
static int wavelan_get_essid(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu,
char *extra)
{
net_local *lp = netdev_priv(dev);
/* Is the domain ID active ? */
wrqu->data.flags = lp->filter_domains;
/* Copy Domain ID into a string (Wavelan specific) */
/* Sound crazy, be we can't have a snprintf in the kernel !!! */
sprintf(extra, "%lX", lp->domain_id);
extra[IW_ESSID_MAX_SIZE] = '\0';
/* Set the length */
wrqu->data.length = strlen(extra);
return 0;
}
/*------------------------------------------------------------------*/
/*
* Wireless Handler : set AP address
*/
static int wavelan_set_wap(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu,
char *extra)
{
#ifdef DEBUG_IOCTL_INFO
printk(KERN_DEBUG "Set AP to : %02X:%02X:%02X:%02X:%02X:%02X\n",
wrqu->ap_addr.sa_data[0],
wrqu->ap_addr.sa_data[1],
wrqu->ap_addr.sa_data[2],
wrqu->ap_addr.sa_data[3],
wrqu->ap_addr.sa_data[4],
wrqu->ap_addr.sa_data[5]);
#endif /* DEBUG_IOCTL_INFO */
return -EOPNOTSUPP;
}
/*------------------------------------------------------------------*/
/*
* Wireless Handler : get AP address
*/
static int wavelan_get_wap(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu,
char *extra)
{
/* Should get the real McCoy instead of own Ethernet address */
memcpy(wrqu->ap_addr.sa_data, dev->dev_addr, WAVELAN_ADDR_SIZE);
wrqu->ap_addr.sa_family = ARPHRD_ETHER;
return -EOPNOTSUPP;
}
#endif /* WAVELAN_ROAMING_EXT */
#ifdef WAVELAN_ROAMING
/*------------------------------------------------------------------*/
/*
* Wireless Handler : set mode
*/
static int wavelan_set_mode(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu,
char *extra)
{
net_local *lp = netdev_priv(dev);
unsigned long flags;
int ret = 0;
/* Disable interrupts and save flags. */
spin_lock_irqsave(&lp->spinlock, flags);
/* Check mode */
switch(wrqu->mode) {
case IW_MODE_ADHOC:
if(do_roaming) {
wv_roam_cleanup(dev);
do_roaming = 0;
}
break;
case IW_MODE_INFRA:
if(!do_roaming) {
wv_roam_init(dev);
do_roaming = 1;
}
break;
default:
ret = -EINVAL;
}
/* Enable interrupts and restore flags. */
spin_unlock_irqrestore(&lp->spinlock, flags);
return ret;
}
/*------------------------------------------------------------------*/
/*
* Wireless Handler : get mode
*/
static int wavelan_get_mode(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu,
char *extra)
{
if(do_roaming)
wrqu->mode = IW_MODE_INFRA;
else
wrqu->mode = IW_MODE_ADHOC;
return 0;
}
#endif /* WAVELAN_ROAMING */
/*------------------------------------------------------------------*/
/*
* Wireless Handler : get range info
*/
static int wavelan_get_range(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu,
char *extra)
{
unsigned int base = dev->base_addr;
net_local *lp = netdev_priv(dev);
struct iw_range *range = (struct iw_range *) extra;
unsigned long flags;
int ret = 0;
/* Set the length (very important for backward compatibility) */
wrqu->data.length = sizeof(struct iw_range);
/* Set all the info we don't care or don't know about to zero */
memset(range, 0, sizeof(struct iw_range));
/* Set the Wireless Extension versions */
range->we_version_compiled = WIRELESS_EXT;
range->we_version_source = 9;
/* Set information in the range struct. */
range->throughput = 1.4 * 1000 * 1000; /* don't argue on this ! */
range->min_nwid = 0x0000;
range->max_nwid = 0xFFFF;
range->sensitivity = 0x3F;
range->max_qual.qual = MMR_SGNL_QUAL;
range->max_qual.level = MMR_SIGNAL_LVL;
range->max_qual.noise = MMR_SILENCE_LVL;
range->avg_qual.qual = MMR_SGNL_QUAL; /* Always max */
/* Need to get better values for those two */
range->avg_qual.level = 30;
range->avg_qual.noise = 8;
range->num_bitrates = 1;
range->bitrate[0] = 2000000; /* 2 Mb/s */
/* Event capability (kernel + driver) */
range->event_capa[0] = (IW_EVENT_CAPA_MASK(0x8B02) |
IW_EVENT_CAPA_MASK(0x8B04) |
IW_EVENT_CAPA_MASK(0x8B06));
range->event_capa[1] = IW_EVENT_CAPA_K_1;
/* Disable interrupts and save flags. */
spin_lock_irqsave(&lp->spinlock, flags);
/* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable). */
if (!(mmc_in(base, mmroff(0, mmr_fee_status)) &
(MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) {
range->num_channels = 10;
range->num_frequency = wv_frequency_list(base, range->freq,
IW_MAX_FREQUENCIES);
} else
range->num_channels = range->num_frequency = 0;
/* Encryption supported ? */
if (mmc_encr(base)) {
range->encoding_size[0] = 8; /* DES = 64 bits key */
range->num_encoding_sizes = 1;
range->max_encoding_tokens = 1; /* Only one key possible */
} else {
range->num_encoding_sizes = 0;
range->max_encoding_tokens = 0;
}
/* Enable interrupts and restore flags. */
spin_unlock_irqrestore(&lp->spinlock, flags);
return ret;
}
/*------------------------------------------------------------------*/
/*
* Wireless Private Handler : set quality threshold
*/
static int wavelan_set_qthr(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu,
char *extra)
{
unsigned int base = dev->base_addr;
net_local *lp = netdev_priv(dev);
psa_t psa;
unsigned long flags;
/* Disable interrupts and save flags. */
spin_lock_irqsave(&lp->spinlock, flags);
psa.psa_quality_thr = *(extra) & 0x0F;
psa_write(dev,
(char *) &psa.psa_quality_thr - (char *) &psa,
(unsigned char *) &psa.psa_quality_thr, 1);
/* update the Wavelan checksum */
update_psa_checksum(dev);
mmc_out(base, mmwoff(0, mmw_quality_thr),
psa.psa_quality_thr);
/* Enable interrupts and restore flags. */
spin_unlock_irqrestore(&lp->spinlock, flags);
return 0;
}
/*------------------------------------------------------------------*/
/*
* Wireless Private Handler : get quality threshold
*/
static int wavelan_get_qthr(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu,
char *extra)
{
net_local *lp = netdev_priv(dev);
psa_t psa;
unsigned long flags;
/* Disable interrupts and save flags. */
spin_lock_irqsave(&lp->spinlock, flags);
psa_read(dev,
(char *) &psa.psa_quality_thr - (char *) &psa,
(unsigned char *) &psa.psa_quality_thr, 1);
*(extra) = psa.psa_quality_thr & 0x0F;
/* Enable interrupts and restore flags. */
spin_unlock_irqrestore(&lp->spinlock, flags);
return 0;
}
#ifdef WAVELAN_ROAMING
/*------------------------------------------------------------------*/
/*
* Wireless Private Handler : set roaming
*/
static int wavelan_set_roam(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu,
char *extra)
{
net_local *lp = netdev_priv(dev);
unsigned long flags;
/* Disable interrupts and save flags. */
spin_lock_irqsave(&lp->spinlock, flags);
/* Note : should check if user == root */
if(do_roaming && (*extra)==0)
wv_roam_cleanup(dev);
else if(do_roaming==0 && (*extra)!=0)
wv_roam_init(dev);
do_roaming = (*extra);
/* Enable interrupts and restore flags. */
spin_unlock_irqrestore(&lp->spinlock, flags);
return 0;
}
/*------------------------------------------------------------------*/
/*
* Wireless Private Handler : get quality threshold
*/
static int wavelan_get_roam(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu,
char *extra)
{
*(extra) = do_roaming;
return 0;
}
#endif /* WAVELAN_ROAMING */
#ifdef HISTOGRAM
/*------------------------------------------------------------------*/
/*
* Wireless Private Handler : set histogram
*/
static int wavelan_set_histo(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu,
char *extra)
{
net_local *lp = netdev_priv(dev);
/* Check the number of intervals. */
if (wrqu->data.length > 16) {
return(-E2BIG);
}
/* Disable histo while we copy the addresses.
* As we don't disable interrupts, we need to do this */
lp->his_number = 0;
/* Are there ranges to copy? */
if (wrqu->data.length > 0) {
/* Copy interval ranges to the driver */
memcpy(lp->his_range, extra, wrqu->data.length);
{
int i;
printk(KERN_DEBUG "Histo :");
for(i = 0; i < wrqu->data.length; i++)
printk(" %d", lp->his_range[i]);
printk("\n");
}
/* Reset result structure. */
memset(lp->his_sum, 0x00, sizeof(long) * 16);
}
/* Now we can set the number of ranges */
lp->his_number = wrqu->data.length;
return(0);
}
/*------------------------------------------------------------------*/
/*
* Wireless Private Handler : get histogram
*/
static int wavelan_get_histo(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu,
char *extra)
{
net_local *lp = netdev_priv(dev);
/* Set the number of intervals. */
wrqu->data.length = lp->his_number;
/* Give back the distribution statistics */
if(lp->his_number > 0)
memcpy(extra, lp->his_sum, sizeof(long) * lp->his_number);
return(0);
}
#endif /* HISTOGRAM */
/*------------------------------------------------------------------*/
/*
* Structures to export the Wireless Handlers
*/
static const struct iw_priv_args wavelan_private_args[] = {
/*{ cmd, set_args, get_args, name } */
{ SIOCSIPQTHR, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, 0, "setqualthr" },
{ SIOCGIPQTHR, 0, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "getqualthr" },
{ SIOCSIPROAM, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, 0, "setroam" },
{ SIOCGIPROAM, 0, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "getroam" },
{ SIOCSIPHISTO, IW_PRIV_TYPE_BYTE | 16, 0, "sethisto" },
{ SIOCGIPHISTO, 0, IW_PRIV_TYPE_INT | 16, "gethisto" },
};
static const iw_handler wavelan_handler[] =
{
NULL, /* SIOCSIWNAME */
wavelan_get_name, /* SIOCGIWNAME */
wavelan_set_nwid, /* SIOCSIWNWID */
wavelan_get_nwid, /* SIOCGIWNWID */
wavelan_set_freq, /* SIOCSIWFREQ */
wavelan_get_freq, /* SIOCGIWFREQ */
#ifdef WAVELAN_ROAMING
wavelan_set_mode, /* SIOCSIWMODE */
wavelan_get_mode, /* SIOCGIWMODE */
#else /* WAVELAN_ROAMING */
NULL, /* SIOCSIWMODE */
NULL, /* SIOCGIWMODE */
#endif /* WAVELAN_ROAMING */
wavelan_set_sens, /* SIOCSIWSENS */
wavelan_get_sens, /* SIOCGIWSENS */
NULL, /* SIOCSIWRANGE */
wavelan_get_range, /* SIOCGIWRANGE */
NULL, /* SIOCSIWPRIV */
NULL, /* SIOCGIWPRIV */
NULL, /* SIOCSIWSTATS */
NULL, /* SIOCGIWSTATS */
iw_handler_set_spy, /* SIOCSIWSPY */
iw_handler_get_spy, /* SIOCGIWSPY */
iw_handler_set_thrspy, /* SIOCSIWTHRSPY */
iw_handler_get_thrspy, /* SIOCGIWTHRSPY */
#ifdef WAVELAN_ROAMING_EXT
wavelan_set_wap, /* SIOCSIWAP */
wavelan_get_wap, /* SIOCGIWAP */
NULL, /* -- hole -- */
NULL, /* SIOCGIWAPLIST */
NULL, /* -- hole -- */
NULL, /* -- hole -- */
wavelan_set_essid, /* SIOCSIWESSID */
wavelan_get_essid, /* SIOCGIWESSID */
#else /* WAVELAN_ROAMING_EXT */
NULL, /* SIOCSIWAP */
NULL, /* SIOCGIWAP */
NULL, /* -- hole -- */
NULL, /* SIOCGIWAPLIST */
NULL, /* -- hole -- */
NULL, /* -- hole -- */
NULL, /* SIOCSIWESSID */
NULL, /* SIOCGIWESSID */
#endif /* WAVELAN_ROAMING_EXT */
NULL, /* SIOCSIWNICKN */
NULL, /* SIOCGIWNICKN */
NULL, /* -- hole -- */
NULL, /* -- hole -- */
NULL, /* SIOCSIWRATE */
NULL, /* SIOCGIWRATE */
NULL, /* SIOCSIWRTS */
NULL, /* SIOCGIWRTS */
NULL, /* SIOCSIWFRAG */
NULL, /* SIOCGIWFRAG */
NULL, /* SIOCSIWTXPOW */
NULL, /* SIOCGIWTXPOW */
NULL, /* SIOCSIWRETRY */
NULL, /* SIOCGIWRETRY */
wavelan_set_encode, /* SIOCSIWENCODE */
wavelan_get_encode, /* SIOCGIWENCODE */
};
static const iw_handler wavelan_private_handler[] =
{
wavelan_set_qthr, /* SIOCIWFIRSTPRIV */
wavelan_get_qthr, /* SIOCIWFIRSTPRIV + 1 */
#ifdef WAVELAN_ROAMING
wavelan_set_roam, /* SIOCIWFIRSTPRIV + 2 */
wavelan_get_roam, /* SIOCIWFIRSTPRIV + 3 */
#else /* WAVELAN_ROAMING */
NULL, /* SIOCIWFIRSTPRIV + 2 */
NULL, /* SIOCIWFIRSTPRIV + 3 */
#endif /* WAVELAN_ROAMING */
#ifdef HISTOGRAM
wavelan_set_histo, /* SIOCIWFIRSTPRIV + 4 */
wavelan_get_histo, /* SIOCIWFIRSTPRIV + 5 */
#endif /* HISTOGRAM */
};
static const struct iw_handler_def wavelan_handler_def =
{
.num_standard = ARRAY_SIZE(wavelan_handler),
.num_private = ARRAY_SIZE(wavelan_private_handler),
.num_private_args = ARRAY_SIZE(wavelan_private_args),
.standard = wavelan_handler,
.private = wavelan_private_handler,
.private_args = wavelan_private_args,
.get_wireless_stats = wavelan_get_wireless_stats,
};
/*------------------------------------------------------------------*/
/*
* Get wireless statistics
* Called by /proc/net/wireless...
*/
static iw_stats *
wavelan_get_wireless_stats(struct net_device * dev)
{
unsigned int base = dev->base_addr;
net_local * lp = netdev_priv(dev);
mmr_t m;
iw_stats * wstats;
unsigned long flags;
#ifdef DEBUG_IOCTL_TRACE
printk(KERN_DEBUG "%s: ->wavelan_get_wireless_stats()\n", dev->name);
#endif
/* Disable interrupts & save flags */
spin_lock_irqsave(&lp->spinlock, flags);
wstats = &lp->wstats;
/* Get data from the mmc */
mmc_out(base, mmwoff(0, mmw_freeze), 1);
mmc_read(base, mmroff(0, mmr_dce_status), &m.mmr_dce_status, 1);
mmc_read(base, mmroff(0, mmr_wrong_nwid_l), &m.mmr_wrong_nwid_l, 2);
mmc_read(base, mmroff(0, mmr_thr_pre_set), &m.mmr_thr_pre_set, 4);
mmc_out(base, mmwoff(0, mmw_freeze), 0);
/* Copy data to wireless stuff */
wstats->status = m.mmr_dce_status & MMR_DCE_STATUS;
wstats->qual.qual = m.mmr_sgnl_qual & MMR_SGNL_QUAL;
wstats->qual.level = m.mmr_signal_lvl & MMR_SIGNAL_LVL;
wstats->qual.noise = m.mmr_silence_lvl & MMR_SILENCE_LVL;
wstats->qual.updated = (((m.mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) >> 7) |
((m.mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) >> 6) |
((m.mmr_silence_lvl & MMR_SILENCE_LVL_VALID) >> 5));
wstats->discard.nwid += (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l;
wstats->discard.code = 0L;
wstats->discard.misc = 0L;
/* ReEnable interrupts & restore flags */
spin_unlock_irqrestore(&lp->spinlock, flags);
#ifdef DEBUG_IOCTL_TRACE
printk(KERN_DEBUG "%s: <-wavelan_get_wireless_stats()\n", dev->name);
#endif
return &lp->wstats;
}
/************************* PACKET RECEPTION *************************/
/*
* This part deal with receiving the packets.
* The interrupt handler get an interrupt when a packet has been
* successfully received and called this part...
*/
/*------------------------------------------------------------------*/
/*
* Calculate the starting address of the frame pointed to by the receive
* frame pointer and verify that the frame seem correct
* (called by wv_packet_rcv())
*/
static int
wv_start_of_frame(struct net_device * dev,
int rfp, /* end of frame */
int wrap) /* start of buffer */
{
unsigned int base = dev->base_addr;
int rp;
int len;
rp = (rfp - 5 + RX_SIZE) % RX_SIZE;
outb(rp & 0xff, PIORL(base));
outb(((rp >> 8) & PIORH_MASK), PIORH(base));
len = inb(PIOP(base));
len |= inb(PIOP(base)) << 8;
/* Sanity checks on size */
/* Frame too big */
if(len > MAXDATAZ + 100)
{
#ifdef DEBUG_RX_ERROR
printk(KERN_INFO "%s: wv_start_of_frame: Received frame too large, rfp %d len 0x%x\n",
dev->name, rfp, len);
#endif
return(-1);
}
/* Frame too short */
if(len < 7)
{
#ifdef DEBUG_RX_ERROR
printk(KERN_INFO "%s: wv_start_of_frame: Received null frame, rfp %d len 0x%x\n",
dev->name, rfp, len);
#endif
return(-1);
}
/* Wrap around buffer */
if(len > ((wrap - (rfp - len) + RX_SIZE) % RX_SIZE)) /* magic formula ! */
{
#ifdef DEBUG_RX_ERROR
printk(KERN_INFO "%s: wv_start_of_frame: wrap around buffer, wrap %d rfp %d len 0x%x\n",
dev->name, wrap, rfp, len);
#endif
return(-1);
}
return((rp - len + RX_SIZE) % RX_SIZE);
} /* wv_start_of_frame */
/*------------------------------------------------------------------*/
/*
* This routine does the actual copy of data (including the ethernet
* header structure) from the WaveLAN card to an sk_buff chain that
* will be passed up to the network interface layer. NOTE: We
* currently don't handle trailer protocols (neither does the rest of
* the network interface), so if that is needed, it will (at least in
* part) be added here. The contents of the receive ring buffer are
* copied to a message chain that is then passed to the kernel.
*
* Note: if any errors occur, the packet is "dropped on the floor"
* (called by wv_packet_rcv())
*/
static void
wv_packet_read(struct net_device * dev,
int fd_p,
int sksize)
{
net_local * lp = netdev_priv(dev);
struct sk_buff * skb;
#ifdef DEBUG_RX_TRACE
printk(KERN_DEBUG "%s: ->wv_packet_read(0x%X, %d)\n",
dev->name, fd_p, sksize);
#endif
/* Allocate some buffer for the new packet */
if((skb = dev_alloc_skb(sksize+2)) == (struct sk_buff *) NULL)
{
#ifdef DEBUG_RX_ERROR
printk(KERN_INFO "%s: wv_packet_read(): could not alloc_skb(%d, GFP_ATOMIC)\n",
dev->name, sksize);
#endif
lp->stats.rx_dropped++;
/*
* Not only do we want to return here, but we also need to drop the
* packet on the floor to clear the interrupt.
*/
return;
}
skb_reserve(skb, 2);
fd_p = read_ringbuf(dev, fd_p, (char *) skb_put(skb, sksize), sksize);
skb->protocol = eth_type_trans(skb, dev);
#ifdef DEBUG_RX_INFO
wv_packet_info(skb_mac_header(skb), sksize, dev->name, "wv_packet_read");
#endif /* DEBUG_RX_INFO */
/* Statistics gathering & stuff associated.
* It seem a bit messy with all the define, but it's really simple... */
if(
#ifdef IW_WIRELESS_SPY
(lp->spy_data.spy_number > 0) ||
#endif /* IW_WIRELESS_SPY */
#ifdef HISTOGRAM
(lp->his_number > 0) ||
#endif /* HISTOGRAM */
#ifdef WAVELAN_ROAMING
(do_roaming) ||
#endif /* WAVELAN_ROAMING */
0)
{
u_char stats[3]; /* Signal level, Noise level, Signal quality */
/* read signal level, silence level and signal quality bytes */
fd_p = read_ringbuf(dev, (fd_p + 4) % RX_SIZE + RX_BASE,
stats, 3);
#ifdef DEBUG_RX_INFO
printk(KERN_DEBUG "%s: wv_packet_read(): Signal level %d/63, Silence level %d/63, signal quality %d/16\n",
dev->name, stats[0] & 0x3F, stats[1] & 0x3F, stats[2] & 0x0F);
#endif
#ifdef WAVELAN_ROAMING
if(do_roaming)
if(WAVELAN_BEACON(skb->data))
wl_roam_gather(dev, skb->data, stats);
#endif /* WAVELAN_ROAMING */
#ifdef WIRELESS_SPY
wl_spy_gather(dev, skb_mac_header(skb) + WAVELAN_ADDR_SIZE, stats);
#endif /* WIRELESS_SPY */
#ifdef HISTOGRAM
wl_his_gather(dev, stats);
#endif /* HISTOGRAM */
}
/*
* Hand the packet to the Network Module
*/
netif_rx(skb);
/* Keep stats up to date */
dev->last_rx = jiffies;
lp->stats.rx_packets++;
lp->stats.rx_bytes += sksize;
#ifdef DEBUG_RX_TRACE
printk(KERN_DEBUG "%s: <-wv_packet_read()\n", dev->name);
#endif
return;
}
/*------------------------------------------------------------------*/
/*
* This routine is called by the interrupt handler to initiate a
* packet transfer from the card to the network interface layer above
* this driver. This routine checks if a buffer has been successfully
* received by the WaveLAN card. If so, the routine wv_packet_read is
* called to do the actual transfer of the card's data including the
* ethernet header into a packet consisting of an sk_buff chain.
* (called by wavelan_interrupt())
* Note : the spinlock is already grabbed for us and irq are disabled.
*/
static void
wv_packet_rcv(struct net_device * dev)
{
unsigned int base = dev->base_addr;
net_local * lp = netdev_priv(dev);
int newrfp;
int rp;
int len;
int f_start;
int status;
int i593_rfp;
int stat_ptr;
u_char c[4];
#ifdef DEBUG_RX_TRACE
printk(KERN_DEBUG "%s: ->wv_packet_rcv()\n", dev->name);
#endif
/* Get the new receive frame pointer from the i82593 chip */
outb(CR0_STATUS_2 | OP0_NOP, LCCR(base));
i593_rfp = inb(LCSR(base));
i593_rfp |= inb(LCSR(base)) << 8;
i593_rfp %= RX_SIZE;
/* Get the new receive frame pointer from the WaveLAN card.
* It is 3 bytes more than the increment of the i82593 receive
* frame pointer, for each packet. This is because it includes the
* 3 roaming bytes added by the mmc.
*/
newrfp = inb(RPLL(base));
newrfp |= inb(RPLH(base)) << 8;
newrfp %= RX_SIZE;
#ifdef DEBUG_RX_INFO
printk(KERN_DEBUG "%s: wv_packet_rcv(): i593_rfp %d stop %d newrfp %d lp->rfp %d\n",
dev->name, i593_rfp, lp->stop, newrfp, lp->rfp);
#endif
#ifdef DEBUG_RX_ERROR
/* If no new frame pointer... */
if(lp->overrunning || newrfp == lp->rfp)
printk(KERN_INFO "%s: wv_packet_rcv(): no new frame: i593_rfp %d stop %d newrfp %d lp->rfp %d\n",
dev->name, i593_rfp, lp->stop, newrfp, lp->rfp);
#endif
/* Read all frames (packets) received */
while(newrfp != lp->rfp)
{
/* A frame is composed of the packet, followed by a status word,
* the length of the frame (word) and the mmc info (SNR & qual).
* It's because the length is at the end that we can only scan
* frames backward. */
/* Find the first frame by skipping backwards over the frames */
rp = newrfp; /* End of last frame */
while(((f_start = wv_start_of_frame(dev, rp, newrfp)) != lp->rfp) &&
(f_start != -1))
rp = f_start;
/* If we had a problem */
if(f_start == -1)
{
#ifdef DEBUG_RX_ERROR
printk(KERN_INFO "wavelan_cs: cannot find start of frame ");
printk(" i593_rfp %d stop %d newrfp %d lp->rfp %d\n",
i593_rfp, lp->stop, newrfp, lp->rfp);
#endif
lp->rfp = rp; /* Get to the last usable frame */
continue;
}
/* f_start point to the beggining of the first frame received
* and rp to the beggining of the next one */
/* Read status & length of the frame */
stat_ptr = (rp - 7 + RX_SIZE) % RX_SIZE;
stat_ptr = read_ringbuf(dev, stat_ptr, c, 4);
status = c[0] | (c[1] << 8);
len = c[2] | (c[3] << 8);
/* Check status */
if((status & RX_RCV_OK) != RX_RCV_OK)
{
lp->stats.rx_errors++;
if(status & RX_NO_SFD)
lp->stats.rx_frame_errors++;
if(status & RX_CRC_ERR)
lp->stats.rx_crc_errors++;
if(status & RX_OVRRUN)
lp->stats.rx_over_errors++;
#ifdef DEBUG_RX_FAIL
printk(KERN_DEBUG "%s: wv_packet_rcv(): packet not received ok, status = 0x%x\n",
dev->name, status);
#endif
}
else
/* Read the packet and transmit to Linux */
wv_packet_read(dev, f_start, len - 2);
/* One frame has been processed, skip it */
lp->rfp = rp;
}
/*
* Update the frame stop register, but set it to less than
* the full 8K to allow space for 3 bytes of signal strength
* per packet.
*/
lp->stop = (i593_rfp + RX_SIZE - ((RX_SIZE / 64) * 3)) % RX_SIZE;
outb(OP0_SWIT_TO_PORT_1 | CR0_CHNL, LCCR(base));
outb(CR1_STOP_REG_UPDATE | (lp->stop >> RX_SIZE_SHIFT), LCCR(base));
outb(OP1_SWIT_TO_PORT_0, LCCR(base));
#ifdef DEBUG_RX_TRACE
printk(KERN_DEBUG "%s: <-wv_packet_rcv()\n", dev->name);
#endif
}
/*********************** PACKET TRANSMISSION ***********************/
/*
* This part deal with sending packet through the wavelan
* We copy the packet to the send buffer and then issue the send
* command to the i82593. The result of this operation will be
* checked in wavelan_interrupt()
*/
/*------------------------------------------------------------------*/
/*
* This routine fills in the appropriate registers and memory
* locations on the WaveLAN card and starts the card off on
* the transmit.
* (called in wavelan_packet_xmit())
*/
static void
wv_packet_write(struct net_device * dev,
void * buf,
short length)
{
net_local * lp = netdev_priv(dev);
unsigned int base = dev->base_addr;
unsigned long flags;
int clen = length;
register u_short xmtdata_base = TX_BASE;
#ifdef DEBUG_TX_TRACE
printk(KERN_DEBUG "%s: ->wv_packet_write(%d)\n", dev->name, length);
#endif
spin_lock_irqsave(&lp->spinlock, flags);
/* Write the length of data buffer followed by the buffer */
outb(xmtdata_base & 0xff, PIORL(base));
outb(((xmtdata_base >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base));
outb(clen & 0xff, PIOP(base)); /* lsb */
outb(clen >> 8, PIOP(base)); /* msb */
/* Send the data */
outsb(PIOP(base), buf, clen);
/* Indicate end of transmit chain */
outb(OP0_NOP, PIOP(base));
/* josullvn@cs.cmu.edu: need to send a second NOP for alignment... */
outb(OP0_NOP, PIOP(base));
/* Reset the transmit DMA pointer */
hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET);
hacr_write(base, HACR_DEFAULT);
/* Send the transmit command */
wv_82593_cmd(dev, "wv_packet_write(): transmit",
OP0_TRANSMIT, SR0_NO_RESULT);
/* Make sure the watchdog will keep quiet for a while */
dev->trans_start = jiffies;
/* Keep stats up to date */
lp->stats.tx_bytes += length;
spin_unlock_irqrestore(&lp->spinlock, flags);
#ifdef DEBUG_TX_INFO
wv_packet_info((u_char *) buf, length, dev->name, "wv_packet_write");
#endif /* DEBUG_TX_INFO */
#ifdef DEBUG_TX_TRACE
printk(KERN_DEBUG "%s: <-wv_packet_write()\n", dev->name);
#endif
}
/*------------------------------------------------------------------*/
/*
* This routine is called when we want to send a packet (NET3 callback)
* In this routine, we check if the harware is ready to accept
* the packet. We also prevent reentrance. Then, we call the function
* to send the packet...
*/
static int
wavelan_packet_xmit(struct sk_buff * skb,
struct net_device * dev)
{
net_local * lp = netdev_priv(dev);
unsigned long flags;
#ifdef DEBUG_TX_TRACE
printk(KERN_DEBUG "%s: ->wavelan_packet_xmit(0x%X)\n", dev->name,
(unsigned) skb);
#endif
/*
* Block a timer-based transmit from overlapping a previous transmit.
* In other words, prevent reentering this routine.
*/
netif_stop_queue(dev);
/* If somebody has asked to reconfigure the controller,
* we can do it now */
if(lp->reconfig_82593)
{
spin_lock_irqsave(&lp->spinlock, flags); /* Disable interrupts */
wv_82593_config(dev);
spin_unlock_irqrestore(&lp->spinlock, flags); /* Re-enable interrupts */
/* Note : the configure procedure was totally synchronous,
* so the Tx buffer is now free */
}
#ifdef DEBUG_TX_ERROR
if (skb->next)
printk(KERN_INFO "skb has next\n");
#endif
/* Check if we need some padding */
/* Note : on wireless the propagation time is in the order of 1us,
* and we don't have the Ethernet specific requirement of beeing
* able to detect collisions, therefore in theory we don't really
* need to pad. Jean II */
if (skb_padto(skb, ETH_ZLEN))
return 0;
wv_packet_write(dev, skb->data, skb->len);
dev_kfree_skb(skb);
#ifdef DEBUG_TX_TRACE
printk(KERN_DEBUG "%s: <-wavelan_packet_xmit()\n", dev->name);
#endif
return(0);
}
/********************** HARDWARE CONFIGURATION **********************/
/*
* This part do the real job of starting and configuring the hardware.
*/
/*------------------------------------------------------------------*/
/*
* Routine to initialize the Modem Management Controller.
* (called by wv_hw_config())
*/
static int
wv_mmc_init(struct net_device * dev)
{
unsigned int base = dev->base_addr;
psa_t psa;
mmw_t m;
int configured;
int i; /* Loop counter */
#ifdef DEBUG_CONFIG_TRACE
printk(KERN_DEBUG "%s: ->wv_mmc_init()\n", dev->name);
#endif
/* Read the parameter storage area */
psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa));
/*
* Check the first three octets of the MAC addr for the manufacturer's code.
* Note: If you get the error message below, you've got a
* non-NCR/AT&T/Lucent PCMCIA cards, see wavelan_cs.h for detail on
* how to configure your card...
*/
for (i = 0; i < ARRAY_SIZE(MAC_ADDRESSES); i++)
if ((psa.psa_univ_mac_addr[0] == MAC_ADDRESSES[i][0]) &&
(psa.psa_univ_mac_addr[1] == MAC_ADDRESSES[i][1]) &&
(psa.psa_univ_mac_addr[2] == MAC_ADDRESSES[i][2]))
break;
/* If we have not found it... */
if (i == ARRAY_SIZE(MAC_ADDRESSES))
{
#ifdef DEBUG_CONFIG_ERRORS
printk(KERN_WARNING "%s: wv_mmc_init(): Invalid MAC address: %02X:%02X:%02X:...\n",
dev->name, psa.psa_univ_mac_addr[0],
psa.psa_univ_mac_addr[1], psa.psa_univ_mac_addr[2]);
#endif
return FALSE;
}
/* Get the MAC address */
memcpy(&dev->dev_addr[0], &psa.psa_univ_mac_addr[0], WAVELAN_ADDR_SIZE);
#ifdef USE_PSA_CONFIG
configured = psa.psa_conf_status & 1;
#else
configured = 0;
#endif
/* Is the PSA is not configured */
if(!configured)
{
/* User will be able to configure NWID after (with iwconfig) */
psa.psa_nwid[0] = 0;
psa.psa_nwid[1] = 0;
/* As NWID is not set : no NWID checking */
psa.psa_nwid_select = 0;
/* Disable encryption */
psa.psa_encryption_select = 0;
/* Set to standard values
* 0x04 for AT,
* 0x01 for MCA,
* 0x04 for PCMCIA and 2.00 card (AT&T 407-024689/E document)
*/
if (psa.psa_comp_number & 1)
psa.psa_thr_pre_set = 0x01;
else
psa.psa_thr_pre_set = 0x04;
psa.psa_quality_thr = 0x03;
/* It is configured */
psa.psa_conf_status |= 1;
#ifdef USE_PSA_CONFIG
/* Write the psa */
psa_write(dev, (char *)psa.psa_nwid - (char *)&psa,
(unsigned char *)psa.psa_nwid, 4);
psa_write(dev, (char *)&psa.psa_thr_pre_set - (char *)&psa,
(unsigned char *)&psa.psa_thr_pre_set, 1);
psa_write(dev, (char *)&psa.psa_quality_thr - (char *)&psa,
(unsigned char *)&psa.psa_quality_thr, 1);
psa_write(dev, (char *)&psa.psa_conf_status - (char *)&psa,
(unsigned char *)&psa.psa_conf_status, 1);
/* update the Wavelan checksum */
update_psa_checksum(dev);
#endif /* USE_PSA_CONFIG */
}
/* Zero the mmc structure */
memset(&m, 0x00, sizeof(m));
/* Copy PSA info to the mmc */
m.mmw_netw_id_l = psa.psa_nwid[1];
m.mmw_netw_id_h = psa.psa_nwid[0];
if(psa.psa_nwid_select & 1)
m.mmw_loopt_sel = 0x00;
else
m.mmw_loopt_sel = MMW_LOOPT_SEL_DIS_NWID;
memcpy(&m.mmw_encr_key, &psa.psa_encryption_key,
sizeof(m.mmw_encr_key));
if(psa.psa_encryption_select)
m.mmw_encr_enable = MMW_ENCR_ENABLE_EN | MMW_ENCR_ENABLE_MODE;
else
m.mmw_encr_enable = 0;
m.mmw_thr_pre_set = psa.psa_thr_pre_set & 0x3F;
m.mmw_quality_thr = psa.psa_quality_thr & 0x0F;
/*
* Set default modem control parameters.
* See NCR document 407-0024326 Rev. A.
*/
m.mmw_jabber_enable = 0x01;
m.mmw_anten_sel = MMW_ANTEN_SEL_ALG_EN;
m.mmw_ifs = 0x20;
m.mmw_mod_delay = 0x04;
m.mmw_jam_time = 0x38;
m.mmw_des_io_invert = 0;
m.mmw_freeze = 0;
m.mmw_decay_prm = 0;
m.mmw_decay_updat_prm = 0;
/* Write all info to mmc */
mmc_write(base, 0, (u_char *)&m, sizeof(m));
/* The following code start the modem of the 2.00 frequency
* selectable cards at power on. It's not strictly needed for the
* following boots...
* The original patch was by Joe Finney for the PCMCIA driver, but
* I've cleaned it a bit and add documentation.
* Thanks to Loeke Brederveld from Lucent for the info.
*/
/* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable)
* (does it work for everybody ? - especially old cards...) */
/* Note : WFREQSEL verify that it is able to read from EEprom
* a sensible frequency (address 0x00) + that MMR_FEE_STATUS_ID
* is 0xA (Xilinx version) or 0xB (Ariadne version).
* My test is more crude but do work... */
if(!(mmc_in(base, mmroff(0, mmr_fee_status)) &
(MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY)))
{
/* We must download the frequency parameters to the
* synthetisers (from the EEprom - area 1)
* Note : as the EEprom is auto decremented, we set the end
* if the area... */
m.mmw_fee_addr = 0x0F;
m.mmw_fee_ctrl = MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD;
mmc_write(base, (char *)&m.mmw_fee_ctrl - (char *)&m,
(unsigned char *)&m.mmw_fee_ctrl, 2);
/* Wait until the download is finished */
fee_wait(base, 100, 100);
#ifdef DEBUG_CONFIG_INFO
/* The frequency was in the last word downloaded... */
mmc_read(base, (char *)&m.mmw_fee_data_l - (char *)&m,
(unsigned char *)&m.mmw_fee_data_l, 2);
/* Print some info for the user */
printk(KERN_DEBUG "%s: Wavelan 2.00 recognised (frequency select) : Current frequency = %ld\n",
dev->name,
((m.mmw_fee_data_h << 4) |
(m.mmw_fee_data_l >> 4)) * 5 / 2 + 24000L);
#endif
/* We must now download the power adjust value (gain) to
* the synthetisers (from the EEprom - area 7 - DAC) */
m.mmw_fee_addr = 0x61;
m.mmw_fee_ctrl = MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD;
mmc_write(base, (char *)&m.mmw_fee_ctrl - (char *)&m,
(unsigned char *)&m.mmw_fee_ctrl, 2);
/* Wait until the download is finished */
} /* if 2.00 card */
#ifdef DEBUG_CONFIG_TRACE
printk(KERN_DEBUG "%s: <-wv_mmc_init()\n", dev->name);
#endif
return TRUE;
}
/*------------------------------------------------------------------*/
/*
* Routine to gracefully turn off reception, and wait for any commands
* to complete.
* (called in wv_ru_start() and wavelan_close() and wavelan_event())
*/
static int
wv_ru_stop(struct net_device * dev)
{
unsigned int base = dev->base_addr;
net_local * lp = netdev_priv(dev);
unsigned long flags;
int status;
int spin;
#ifdef DEBUG_CONFIG_TRACE
printk(KERN_DEBUG "%s: ->wv_ru_stop()\n", dev->name);
#endif
spin_lock_irqsave(&lp->spinlock, flags);
/* First, send the LAN controller a stop receive command */
wv_82593_cmd(dev, "wv_graceful_shutdown(): stop-rcv",
OP0_STOP_RCV, SR0_NO_RESULT);
/* Then, spin until the receive unit goes idle */
spin = 300;
do
{
udelay(10);
outb(OP0_NOP | CR0_STATUS_3, LCCR(base));
status = inb(LCSR(base));
}
while(((status & SR3_RCV_STATE_MASK) != SR3_RCV_IDLE) && (spin-- > 0));
/* Now, spin until the chip finishes executing its current command */
do
{
udelay(10);
outb(OP0_NOP | CR0_STATUS_3, LCCR(base));
status = inb(LCSR(base));
}
while(((status & SR3_EXEC_STATE_MASK) != SR3_EXEC_IDLE) && (spin-- > 0));
spin_unlock_irqrestore(&lp->spinlock, flags);
/* If there was a problem */
if(spin <= 0)
{
#ifdef DEBUG_CONFIG_ERRORS
printk(KERN_INFO "%s: wv_ru_stop(): The chip doesn't want to stop...\n",
dev->name);
#endif
return FALSE;
}
#ifdef DEBUG_CONFIG_TRACE
printk(KERN_DEBUG "%s: <-wv_ru_stop()\n", dev->name);
#endif
return TRUE;
} /* wv_ru_stop */
/*------------------------------------------------------------------*/
/*
* This routine starts the receive unit running. First, it checks if
* the card is actually ready. Then the card is instructed to receive
* packets again.
* (called in wv_hw_reset() & wavelan_open())
*/
static int
wv_ru_start(struct net_device * dev)
{
unsigned int base = dev->base_addr;
net_local * lp = netdev_priv(dev);
unsigned long flags;
#ifdef DEBUG_CONFIG_TRACE
printk(KERN_DEBUG "%s: ->wv_ru_start()\n", dev->name);
#endif
/*
* We need to start from a quiescent state. To do so, we could check
* if the card is already running, but instead we just try to shut
* it down. First, we disable reception (in case it was already enabled).
*/
if(!wv_ru_stop(dev))
return FALSE;
spin_lock_irqsave(&lp->spinlock, flags);
/* Now we know that no command is being executed. */
/* Set the receive frame pointer and stop pointer */
lp->rfp = 0;
outb(OP0_SWIT_TO_PORT_1 | CR0_CHNL, LCCR(base));
/* Reset ring management. This sets the receive frame pointer to 1 */
outb(OP1_RESET_RING_MNGMT, LCCR(base));
#if 0
/* XXX the i82593 manual page 6-4 seems to indicate that the stop register
should be set as below */
/* outb(CR1_STOP_REG_UPDATE|((RX_SIZE - 0x40)>> RX_SIZE_SHIFT),LCCR(base));*/
#elif 0
/* but I set it 0 instead */
lp->stop = 0;
#else
/* but I set it to 3 bytes per packet less than 8K */
lp->stop = (0 + RX_SIZE - ((RX_SIZE / 64) * 3)) % RX_SIZE;
#endif
outb(CR1_STOP_REG_UPDATE | (lp->stop >> RX_SIZE_SHIFT), LCCR(base));
outb(OP1_INT_ENABLE, LCCR(base));
outb(OP1_SWIT_TO_PORT_0, LCCR(base));
/* Reset receive DMA pointer */
hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET);
hacr_write_slow(base, HACR_DEFAULT);
/* Receive DMA on channel 1 */
wv_82593_cmd(dev, "wv_ru_start(): rcv-enable",
CR0_CHNL | OP0_RCV_ENABLE, SR0_NO_RESULT);
#ifdef DEBUG_I82593_SHOW
{
int status;
int opri;
int spin = 10000;
/* spin until the chip starts receiving */
do
{
outb(OP0_NOP | CR0_STATUS_3, LCCR(base));
status = inb(LCSR(base));
if(spin-- <= 0)
break;
}
while(((status & SR3_RCV_STATE_MASK) != SR3_RCV_ACTIVE) &&
((status & SR3_RCV_STATE_MASK) != SR3_RCV_READY));
printk(KERN_DEBUG "rcv status is 0x%x [i:%d]\n",
(status & SR3_RCV_STATE_MASK), i);
}
#endif
spin_unlock_irqrestore(&lp->spinlock, flags);
#ifdef DEBUG_CONFIG_TRACE
printk(KERN_DEBUG "%s: <-wv_ru_start()\n", dev->name);
#endif
return TRUE;
}
/*------------------------------------------------------------------*/
/*
* This routine does a standard config of the WaveLAN controller (i82593).
* In the ISA driver, this is integrated in wavelan_hardware_reset()
* (called by wv_hw_config(), wv_82593_reconfig() & wavelan_packet_xmit())
*/
static int
wv_82593_config(struct net_device * dev)
{
unsigned int base = dev->base_addr;
net_local * lp = netdev_priv(dev);
struct i82593_conf_block cfblk;
int ret = TRUE;
#ifdef DEBUG_CONFIG_TRACE
printk(KERN_DEBUG "%s: ->wv_82593_config()\n", dev->name);
#endif
/* Create & fill i82593 config block
*
* Now conform to Wavelan document WCIN085B
*/
memset(&cfblk, 0x00, sizeof(struct i82593_conf_block));
cfblk.d6mod = FALSE; /* Run in i82593 advanced mode */
cfblk.fifo_limit = 5; /* = 56 B rx and 40 B tx fifo thresholds */
cfblk.forgnesi = FALSE; /* 0=82C501, 1=AMD7992B compatibility */
cfblk.fifo_32 = 1;
cfblk.throttle_enb = FALSE;
cfblk.contin = TRUE; /* enable continuous mode */
cfblk.cntrxint = FALSE; /* enable continuous mode receive interrupts */
cfblk.addr_len = WAVELAN_ADDR_SIZE;
cfblk.acloc = TRUE; /* Disable source addr insertion by i82593 */
cfblk.preamb_len = 0; /* 2 bytes preamble (SFD) */
cfblk.loopback = FALSE;
cfblk.lin_prio = 0; /* conform to 802.3 backoff algorithm */
cfblk.exp_prio = 5; /* conform to 802.3 backoff algorithm */
cfblk.bof_met = 1; /* conform to 802.3 backoff algorithm */
cfblk.ifrm_spc = 0x20 >> 4; /* 32 bit times interframe spacing */
cfblk.slottim_low = 0x20 >> 5; /* 32 bit times slot time */
cfblk.slottim_hi = 0x0;
cfblk.max_retr = 15;
cfblk.prmisc = ((lp->promiscuous) ? TRUE: FALSE); /* Promiscuous mode */
cfblk.bc_dis = FALSE; /* Enable broadcast reception */
cfblk.crs_1 = TRUE; /* Transmit without carrier sense */
cfblk.nocrc_ins = FALSE; /* i82593 generates CRC */
cfblk.crc_1632 = FALSE; /* 32-bit Autodin-II CRC */
cfblk.crs_cdt = FALSE; /* CD not to be interpreted as CS */
cfblk.cs_filter = 0; /* CS is recognized immediately */
cfblk.crs_src = FALSE; /* External carrier sense */
cfblk.cd_filter = 0; /* CD is recognized immediately */
cfblk.min_fr_len = ETH_ZLEN >> 2; /* Minimum frame length 64 bytes */
cfblk.lng_typ = FALSE; /* Length field > 1500 = type field */
cfblk.lng_fld = TRUE; /* Disable 802.3 length field check */
cfblk.rxcrc_xf = TRUE; /* Don't transfer CRC to memory */
cfblk.artx = TRUE; /* Disable automatic retransmission */
cfblk.sarec = TRUE; /* Disable source addr trig of CD */
cfblk.tx_jabber = TRUE; /* Disable jabber jam sequence */
cfblk.hash_1 = FALSE; /* Use bits 0-5 in mc address hash */
cfblk.lbpkpol = TRUE; /* Loopback pin active high */
cfblk.fdx = FALSE; /* Disable full duplex operation */
cfblk.dummy_6 = 0x3f; /* all ones */
cfblk.mult_ia = FALSE; /* No multiple individual addresses */
cfblk.dis_bof = FALSE; /* Disable the backoff algorithm ?! */
cfblk.dummy_1 = TRUE; /* set to 1 */
cfblk.tx_ifs_retrig = 3; /* Hmm... Disabled */
#ifdef MULTICAST_ALL
cfblk.mc_all = (lp->allmulticast ? TRUE: FALSE); /* Allow all multicasts */
#else
cfblk.mc_all = FALSE; /* No multicast all mode */
#endif
cfblk.rcv_mon = 0; /* Monitor mode disabled */
cfblk.frag_acpt = TRUE; /* Do not accept fragments */
cfblk.tstrttrs = FALSE; /* No start transmission threshold */
cfblk.fretx = TRUE; /* FIFO automatic retransmission */
cfblk.syncrqs = FALSE; /* Synchronous DRQ deassertion... */
cfblk.sttlen = TRUE; /* 6 byte status registers */
cfblk.rx_eop = TRUE; /* Signal EOP on packet reception */
cfblk.tx_eop = TRUE; /* Signal EOP on packet transmission */
cfblk.rbuf_size = RX_SIZE>>11; /* Set receive buffer size */
cfblk.rcvstop = TRUE; /* Enable Receive Stop Register */
#ifdef DEBUG_I82593_SHOW
{
u_char *c = (u_char *) &cfblk;
int i;
printk(KERN_DEBUG "wavelan_cs: config block:");
for(i = 0; i < sizeof(struct i82593_conf_block); i++,c++)
{
if((i % 16) == 0) printk("\n" KERN_DEBUG);
printk("%02x ", *c);
}
printk("\n");
}
#endif
/* Copy the config block to the i82593 */
outb(TX_BASE & 0xff, PIORL(base));
outb(((TX_BASE >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base));
outb(sizeof(struct i82593_conf_block) & 0xff, PIOP(base)); /* lsb */
outb(sizeof(struct i82593_conf_block) >> 8, PIOP(base)); /* msb */
outsb(PIOP(base), (char *) &cfblk, sizeof(struct i82593_conf_block));
/* reset transmit DMA pointer */
hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET);
hacr_write(base, HACR_DEFAULT);
if(!wv_82593_cmd(dev, "wv_82593_config(): configure",
OP0_CONFIGURE, SR0_CONFIGURE_DONE))
ret = FALSE;
/* Initialize adapter's ethernet MAC address */
outb(TX_BASE & 0xff, PIORL(base));
outb(((TX_BASE >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base));
outb(WAVELAN_ADDR_SIZE, PIOP(base)); /* byte count lsb */
outb(0, PIOP(base)); /* byte count msb */
outsb(PIOP(base), &dev->dev_addr[0], WAVELAN_ADDR_SIZE);
/* reset transmit DMA pointer */
hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET);
hacr_write(base, HACR_DEFAULT);
if(!wv_82593_cmd(dev, "wv_82593_config(): ia-setup",
OP0_IA_SETUP, SR0_IA_SETUP_DONE))
ret = FALSE;
#ifdef WAVELAN_ROAMING
/* If roaming is enabled, join the "Beacon Request" multicast group... */
/* But only if it's not in there already! */
if(do_roaming)
dev_mc_add(dev,WAVELAN_BEACON_ADDRESS, WAVELAN_ADDR_SIZE, 1);
#endif /* WAVELAN_ROAMING */
/* If any multicast address to set */
if(lp->mc_count)
{
struct dev_mc_list * dmi;
int addrs_len = WAVELAN_ADDR_SIZE * lp->mc_count;
#ifdef DEBUG_CONFIG_INFO
DECLARE_MAC_BUF(mac);
printk(KERN_DEBUG "%s: wv_hw_config(): set %d multicast addresses:\n",
dev->name, lp->mc_count);
for(dmi=dev->mc_list; dmi; dmi=dmi->next)
printk(KERN_DEBUG " %s\n",
print_mac(mac, dmi->dmi_addr));
#endif
/* Initialize adapter's ethernet multicast addresses */
outb(TX_BASE & 0xff, PIORL(base));
outb(((TX_BASE >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base));
outb(addrs_len & 0xff, PIOP(base)); /* byte count lsb */
outb((addrs_len >> 8), PIOP(base)); /* byte count msb */
for(dmi=dev->mc_list; dmi; dmi=dmi->next)
outsb(PIOP(base), dmi->dmi_addr, dmi->dmi_addrlen);
/* reset transmit DMA pointer */
hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET);
hacr_write(base, HACR_DEFAULT);
if(!wv_82593_cmd(dev, "wv_82593_config(): mc-setup",
OP0_MC_SETUP, SR0_MC_SETUP_DONE))
ret = FALSE;
lp->mc_count = dev->mc_count; /* remember to avoid repeated reset */
}
/* Job done, clear the flag */
lp->reconfig_82593 = FALSE;
#ifdef DEBUG_CONFIG_TRACE
printk(KERN_DEBUG "%s: <-wv_82593_config()\n", dev->name);
#endif
return(ret);
}
/*------------------------------------------------------------------*/
/*
* Read the Access Configuration Register, perform a software reset,
* and then re-enable the card's software.
*
* If I understand correctly : reset the pcmcia interface of the
* wavelan.
* (called by wv_config())
*/
static int
wv_pcmcia_reset(struct net_device * dev)
{
int i;
conf_reg_t reg = { 0, CS_READ, CISREG_COR, 0 };
struct pcmcia_device * link = ((net_local *)netdev_priv(dev))->link;
#ifdef DEBUG_CONFIG_TRACE
printk(KERN_DEBUG "%s: ->wv_pcmcia_reset()\n", dev->name);
#endif
i = pcmcia_access_configuration_register(link, &reg);
if(i != CS_SUCCESS)
{
cs_error(link, AccessConfigurationRegister, i);
return FALSE;
}
#ifdef DEBUG_CONFIG_INFO
printk(KERN_DEBUG "%s: wavelan_pcmcia_reset(): Config reg is 0x%x\n",
dev->name, (u_int) reg.Value);
#endif
reg.Action = CS_WRITE;
reg.Value = reg.Value | COR_SW_RESET;
i = pcmcia_access_configuration_register(link, &reg);
if(i != CS_SUCCESS)
{
cs_error(link, AccessConfigurationRegister, i);
return FALSE;
}
reg.Action = CS_WRITE;
reg.Value = COR_LEVEL_IRQ | COR_CONFIG;
i = pcmcia_access_configuration_register(link, &reg);
if(i != CS_SUCCESS)
{
cs_error(link, AccessConfigurationRegister, i);
return FALSE;
}
#ifdef DEBUG_CONFIG_TRACE
printk(KERN_DEBUG "%s: <-wv_pcmcia_reset()\n", dev->name);
#endif
return TRUE;
}
/*------------------------------------------------------------------*/
/*
* wavelan_hw_config() is called after a CARD_INSERTION event is
* received, to configure the wavelan hardware.
* Note that the reception will be enabled in wavelan->open(), so the
* device is configured but idle...
* Performs the following actions:
* 1. A pcmcia software reset (using wv_pcmcia_reset())
* 2. A power reset (reset DMA)
* 3. Reset the LAN controller
* 4. Initialize the radio modem (using wv_mmc_init)
* 5. Configure LAN controller (using wv_82593_config)
* 6. Perform a diagnostic on the LAN controller
* (called by wavelan_event() & wv_hw_reset())
*/
static int
wv_hw_config(struct net_device * dev)
{
net_local * lp = netdev_priv(dev);
unsigned int base = dev->base_addr;
unsigned long flags;
int ret = FALSE;
#ifdef DEBUG_CONFIG_TRACE
printk(KERN_DEBUG "%s: ->wv_hw_config()\n", dev->name);
#endif
/* compile-time check the sizes of structures */
BUILD_BUG_ON(sizeof(psa_t) != PSA_SIZE);
BUILD_BUG_ON(sizeof(mmw_t) != MMW_SIZE);
BUILD_BUG_ON(sizeof(mmr_t) != MMR_SIZE);
/* Reset the pcmcia interface */
if(wv_pcmcia_reset(dev) == FALSE)
return FALSE;
/* Disable interrupts */
spin_lock_irqsave(&lp->spinlock, flags);
/* Disguised goto ;-) */
do
{
/* Power UP the module + reset the modem + reset host adapter
* (in fact, reset DMA channels) */
hacr_write_slow(base, HACR_RESET);
hacr_write(base, HACR_DEFAULT);
/* Check if the module has been powered up... */
if(hasr_read(base) & HASR_NO_CLK)
{
#ifdef DEBUG_CONFIG_ERRORS
printk(KERN_WARNING "%s: wv_hw_config(): modem not connected or not a wavelan card\n",
dev->name);
#endif
break;
}
/* initialize the modem */
if(wv_mmc_init(dev) == FALSE)
{
#ifdef DEBUG_CONFIG_ERRORS
printk(KERN_WARNING "%s: wv_hw_config(): Can't configure the modem\n",
dev->name);
#endif
break;
}
/* reset the LAN controller (i82593) */
outb(OP0_RESET, LCCR(base));
mdelay(1); /* A bit crude ! */
/* Initialize the LAN controller */
if(wv_82593_config(dev) == FALSE)
{
#ifdef DEBUG_CONFIG_ERRORS
printk(KERN_INFO "%s: wv_hw_config(): i82593 init failed\n",
dev->name);
#endif
break;
}
/* Diagnostic */
if(wv_diag(dev) == FALSE)
{
#ifdef DEBUG_CONFIG_ERRORS
printk(KERN_INFO "%s: wv_hw_config(): i82593 diagnostic failed\n",
dev->name);
#endif
break;
}
/*
* insert code for loopback test here
*/
/* The device is now configured */
lp->configured = 1;
ret = TRUE;
}
while(0);
/* Re-enable interrupts */
spin_unlock_irqrestore(&lp->spinlock, flags);
#ifdef DEBUG_CONFIG_TRACE
printk(KERN_DEBUG "%s: <-wv_hw_config()\n", dev->name);
#endif
return(ret);
}
/*------------------------------------------------------------------*/
/*
* Totally reset the wavelan and restart it.
* Performs the following actions:
* 1. Call wv_hw_config()
* 2. Start the LAN controller's receive unit
* (called by wavelan_event(), wavelan_watchdog() and wavelan_open())
*/
static void
wv_hw_reset(struct net_device * dev)
{
net_local * lp = netdev_priv(dev);
#ifdef DEBUG_CONFIG_TRACE
printk(KERN_DEBUG "%s: ->wv_hw_reset()\n", dev->name);
#endif
lp->nresets++;
lp->configured = 0;
/* Call wv_hw_config() for most of the reset & init stuff */
if(wv_hw_config(dev) == FALSE)
return;
/* start receive unit */
wv_ru_start(dev);
#ifdef DEBUG_CONFIG_TRACE
printk(KERN_DEBUG "%s: <-wv_hw_reset()\n", dev->name);
#endif
}
/*------------------------------------------------------------------*/
/*
* wv_pcmcia_config() is called after a CARD_INSERTION event is
* received, to configure the PCMCIA socket, and to make the ethernet
* device available to the system.
* (called by wavelan_event())
*/
static int
wv_pcmcia_config(struct pcmcia_device * link)
{
struct net_device * dev = (struct net_device *) link->priv;
int i;
win_req_t req;
memreq_t mem;
net_local * lp = netdev_priv(dev);
#ifdef DEBUG_CONFIG_TRACE
printk(KERN_DEBUG "->wv_pcmcia_config(0x%p)\n", link);
#endif
do
{
i = pcmcia_request_io(link, &link->io);
if(i != CS_SUCCESS)
{
cs_error(link, RequestIO, i);
break;
}
/*
* Now allocate an interrupt line. Note that this does not
* actually assign a handler to the interrupt.
*/
i = pcmcia_request_irq(link, &link->irq);
if(i != CS_SUCCESS)
{
cs_error(link, RequestIRQ, i);
break;
}
/*
* This actually configures the PCMCIA socket -- setting up
* the I/O windows and the interrupt mapping.
*/
link->conf.ConfigIndex = 1;
i = pcmcia_request_configuration(link, &link->conf);
if(i != CS_SUCCESS)
{
cs_error(link, RequestConfiguration, i);
break;
}
/*
* Allocate a small memory window. Note that the struct pcmcia_device
* structure provides space for one window handle -- if your
* device needs several windows, you'll need to keep track of
* the handles in your private data structure, link->priv.
*/
req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
req.Base = req.Size = 0;
req.AccessSpeed = mem_speed;
i = pcmcia_request_window(&link, &req, &link->win);
if(i != CS_SUCCESS)
{
cs_error(link, RequestWindow, i);
break;
}
lp->mem = ioremap(req.Base, req.Size);
dev->mem_start = (u_long)lp->mem;
dev->mem_end = dev->mem_start + req.Size;
mem.CardOffset = 0; mem.Page = 0;
i = pcmcia_map_mem_page(link->win, &mem);
if(i != CS_SUCCESS)
{
cs_error(link, MapMemPage, i);
break;
}
/* Feed device with this info... */
dev->irq = link->irq.AssignedIRQ;
dev->base_addr = link->io.BasePort1;
netif_start_queue(dev);
#ifdef DEBUG_CONFIG_INFO
printk(KERN_DEBUG "wv_pcmcia_config: MEMSTART %p IRQ %d IOPORT 0x%x\n",
lp->mem, dev->irq, (u_int) dev->base_addr);
#endif
SET_NETDEV_DEV(dev, &handle_to_dev(link));
i = register_netdev(dev);
if(i != 0)
{
#ifdef DEBUG_CONFIG_ERRORS
printk(KERN_INFO "wv_pcmcia_config(): register_netdev() failed\n");
#endif
break;
}
}
while(0); /* Humm... Disguised goto !!! */
/* If any step failed, release any partially configured state */
if(i != 0)
{
wv_pcmcia_release(link);
return FALSE;
}
strcpy(((net_local *) netdev_priv(dev))->node.dev_name, dev->name);
link->dev_node = &((net_local *) netdev_priv(dev))->node;
#ifdef DEBUG_CONFIG_TRACE
printk(KERN_DEBUG "<-wv_pcmcia_config()\n");
#endif
return TRUE;
}
/*------------------------------------------------------------------*/
/*
* After a card is removed, wv_pcmcia_release() will unregister the net
* device, and release the PCMCIA configuration. If the device is
* still open, this will be postponed until it is closed.
*/
static void
wv_pcmcia_release(struct pcmcia_device *link)
{
struct net_device * dev = (struct net_device *) link->priv;
net_local * lp = netdev_priv(dev);
#ifdef DEBUG_CONFIG_TRACE
printk(KERN_DEBUG "%s: -> wv_pcmcia_release(0x%p)\n", dev->name, link);
#endif
iounmap(lp->mem);
pcmcia_disable_device(link);
#ifdef DEBUG_CONFIG_TRACE
printk(KERN_DEBUG "%s: <- wv_pcmcia_release()\n", dev->name);
#endif
}
/************************ INTERRUPT HANDLING ************************/
/*
* This function is the interrupt handler for the WaveLAN card. This
* routine will be called whenever:
* 1. A packet is received.
* 2. A packet has successfully been transferred and the unit is
* ready to transmit another packet.
* 3. A command has completed execution.
*/
static irqreturn_t
wavelan_interrupt(int irq,
void * dev_id)
{
struct net_device * dev = dev_id;
net_local * lp;
unsigned int base;
int status0;
u_int tx_status;
#ifdef DEBUG_INTERRUPT_TRACE
printk(KERN_DEBUG "%s: ->wavelan_interrupt()\n", dev->name);
#endif
lp = netdev_priv(dev);
base = dev->base_addr;
#ifdef DEBUG_INTERRUPT_INFO
/* Check state of our spinlock (it should be cleared) */
if(spin_is_locked(&lp->spinlock))
printk(KERN_DEBUG
"%s: wavelan_interrupt(): spinlock is already locked !!!\n",
dev->name);
#endif
/* Prevent reentrancy. We need to do that because we may have
* multiple interrupt handler running concurently.
* It is safe because interrupts are disabled before aquiring
* the spinlock. */
spin_lock(&lp->spinlock);
/* Treat all pending interrupts */
while(1)
{
/* ---------------- INTERRUPT CHECKING ---------------- */
/*
* Look for the interrupt and verify the validity
*/
outb(CR0_STATUS_0 | OP0_NOP, LCCR(base));
status0 = inb(LCSR(base));
#ifdef DEBUG_INTERRUPT_INFO
printk(KERN_DEBUG "status0 0x%x [%s => 0x%x]", status0,
(status0&SR0_INTERRUPT)?"int":"no int",status0&~SR0_INTERRUPT);
if(status0&SR0_INTERRUPT)
{
printk(" [%s => %d]\n", (status0 & SR0_CHNL) ? "chnl" :
((status0 & SR0_EXECUTION) ? "cmd" :
((status0 & SR0_RECEPTION) ? "recv" : "unknown")),
(status0 & SR0_EVENT_MASK));
}
else
printk("\n");
#endif
/* Return if no actual interrupt from i82593 (normal exit) */
if(!(status0 & SR0_INTERRUPT))
break;
/* If interrupt is both Rx and Tx or none...
* This code in fact is there to catch the spurious interrupt
* when you remove the wavelan pcmcia card from the socket */
if(((status0 & SR0_BOTH_RX_TX) == SR0_BOTH_RX_TX) ||
((status0 & SR0_BOTH_RX_TX) == 0x0))
{
#ifdef DEBUG_INTERRUPT_INFO
printk(KERN_INFO "%s: wv_interrupt(): bogus interrupt (or from dead card) : %X\n",
dev->name, status0);
#endif
/* Acknowledge the interrupt */
outb(CR0_INT_ACK | OP0_NOP, LCCR(base));
break;
}
/* ----------------- RECEIVING PACKET ----------------- */
/*
* When the wavelan signal the reception of a new packet,
* we call wv_packet_rcv() to copy if from the buffer and
* send it to NET3
*/
if(status0 & SR0_RECEPTION)
{
#ifdef DEBUG_INTERRUPT_INFO
printk(KERN_DEBUG "%s: wv_interrupt(): receive\n", dev->name);
#endif
if((status0 & SR0_EVENT_MASK) == SR0_STOP_REG_HIT)
{
#ifdef DEBUG_INTERRUPT_ERROR
printk(KERN_INFO "%s: wv_interrupt(): receive buffer overflow\n",
dev->name);
#endif
lp->stats.rx_over_errors++;
lp->overrunning = 1;
}
/* Get the packet */
wv_packet_rcv(dev);
lp->overrunning = 0;
/* Acknowledge the interrupt */
outb(CR0_INT_ACK | OP0_NOP, LCCR(base));
continue;
}
/* ---------------- COMMAND COMPLETION ---------------- */
/*
* Interrupts issued when the i82593 has completed a command.
* Most likely : transmission done
*/
/* If a transmission has been done */
if((status0 & SR0_EVENT_MASK) == SR0_TRANSMIT_DONE ||
(status0 & SR0_EVENT_MASK) == SR0_RETRANSMIT_DONE ||
(status0 & SR0_EVENT_MASK) == SR0_TRANSMIT_NO_CRC_DONE)
{
#ifdef DEBUG_TX_ERROR
if((status0 & SR0_EVENT_MASK) == SR0_TRANSMIT_NO_CRC_DONE)
printk(KERN_INFO "%s: wv_interrupt(): packet transmitted without CRC.\n",
dev->name);
#endif
/* Get transmission status */
tx_status = inb(LCSR(base));
tx_status |= (inb(LCSR(base)) << 8);
#ifdef DEBUG_INTERRUPT_INFO
printk(KERN_DEBUG "%s: wv_interrupt(): transmission done\n",
dev->name);
{
u_int rcv_bytes;
u_char status3;
rcv_bytes = inb(LCSR(base));
rcv_bytes |= (inb(LCSR(base)) << 8);
status3 = inb(LCSR(base));
printk(KERN_DEBUG "tx_status 0x%02x rcv_bytes 0x%02x status3 0x%x\n",
tx_status, rcv_bytes, (u_int) status3);
}
#endif
/* Check for possible errors */
if((tx_status & TX_OK) != TX_OK)
{
lp->stats.tx_errors++;
if(tx_status & TX_FRTL)
{
#ifdef DEBUG_TX_ERROR
printk(KERN_INFO "%s: wv_interrupt(): frame too long\n",
dev->name);
#endif
}
if(tx_status & TX_UND_RUN)
{
#ifdef DEBUG_TX_FAIL
printk(KERN_DEBUG "%s: wv_interrupt(): DMA underrun\n",
dev->name);
#endif
lp->stats.tx_aborted_errors++;
}
if(tx_status & TX_LOST_CTS)
{
#ifdef DEBUG_TX_FAIL
printk(KERN_DEBUG "%s: wv_interrupt(): no CTS\n", dev->name);
#endif
lp->stats.tx_carrier_errors++;
}
if(tx_status & TX_LOST_CRS)
{
#ifdef DEBUG_TX_FAIL
printk(KERN_DEBUG "%s: wv_interrupt(): no carrier\n",
dev->name);
#endif
lp->stats.tx_carrier_errors++;
}
if(tx_status & TX_HRT_BEAT)
{
#ifdef DEBUG_TX_FAIL
printk(KERN_DEBUG "%s: wv_interrupt(): heart beat\n", dev->name);
#endif
lp->stats.tx_heartbeat_errors++;
}
if(tx_status & TX_DEFER)
{
#ifdef DEBUG_TX_FAIL
printk(KERN_DEBUG "%s: wv_interrupt(): channel jammed\n",
dev->name);
#endif
}
/* Ignore late collisions since they're more likely to happen
* here (the WaveLAN design prevents the LAN controller from
* receiving while it is transmitting). We take action only when
* the maximum retransmit attempts is exceeded.
*/
if(tx_status & TX_COLL)
{
if(tx_status & TX_MAX_COL)
{
#ifdef DEBUG_TX_FAIL
printk(KERN_DEBUG "%s: wv_interrupt(): channel congestion\n",
dev->name);
#endif
if(!(tx_status & TX_NCOL_MASK))
{
lp->stats.collisions += 0x10;
}
}
}
} /* if(!(tx_status & TX_OK)) */
lp->stats.collisions += (tx_status & TX_NCOL_MASK);
lp->stats.tx_packets++;
netif_wake_queue(dev);
outb(CR0_INT_ACK | OP0_NOP, LCCR(base)); /* Acknowledge the interrupt */
}
else /* if interrupt = transmit done or retransmit done */
{
#ifdef DEBUG_INTERRUPT_ERROR
printk(KERN_INFO "wavelan_cs: unknown interrupt, status0 = %02x\n",
status0);
#endif
outb(CR0_INT_ACK | OP0_NOP, LCCR(base)); /* Acknowledge the interrupt */
}
} /* while(1) */
spin_unlock(&lp->spinlock);
#ifdef DEBUG_INTERRUPT_TRACE
printk(KERN_DEBUG "%s: <-wavelan_interrupt()\n", dev->name);
#endif
/* We always return IRQ_HANDLED, because we will receive empty
* interrupts under normal operations. Anyway, it doesn't matter
* as we are dealing with an ISA interrupt that can't be shared.
*
* Explanation : under heavy receive, the following happens :
* ->wavelan_interrupt()
* (status0 & SR0_INTERRUPT) != 0
* ->wv_packet_rcv()
* (status0 & SR0_INTERRUPT) != 0
* ->wv_packet_rcv()
* (status0 & SR0_INTERRUPT) == 0 // i.e. no more event
* <-wavelan_interrupt()
* ->wavelan_interrupt()
* (status0 & SR0_INTERRUPT) == 0 // i.e. empty interrupt
* <-wavelan_interrupt()
* Jean II */
return IRQ_HANDLED;
} /* wv_interrupt */
/*------------------------------------------------------------------*/
/*
* Watchdog: when we start a transmission, a timer is set for us in the
* kernel. If the transmission completes, this timer is disabled. If
* the timer expires, we are called and we try to unlock the hardware.
*
* Note : This watchdog is move clever than the one in the ISA driver,
* because it try to abort the current command before reseting
* everything...
* On the other hand, it's a bit simpler, because we don't have to
* deal with the multiple Tx buffers...
*/
static void
wavelan_watchdog(struct net_device * dev)
{
net_local * lp = netdev_priv(dev);
unsigned int base = dev->base_addr;
unsigned long flags;
int aborted = FALSE;
#ifdef DEBUG_INTERRUPT_TRACE
printk(KERN_DEBUG "%s: ->wavelan_watchdog()\n", dev->name);
#endif
#ifdef DEBUG_INTERRUPT_ERROR
printk(KERN_INFO "%s: wavelan_watchdog: watchdog timer expired\n",
dev->name);
#endif
spin_lock_irqsave(&lp->spinlock, flags);
/* Ask to abort the current command */
outb(OP0_ABORT, LCCR(base));
/* Wait for the end of the command (a bit hackish) */
if(wv_82593_cmd(dev, "wavelan_watchdog(): abort",
OP0_NOP | CR0_STATUS_3, SR0_EXECUTION_ABORTED))
aborted = TRUE;
/* Release spinlock here so that wv_hw_reset() can grab it */
spin_unlock_irqrestore(&lp->spinlock, flags);
/* Check if we were successful in aborting it */
if(!aborted)
{
/* It seem that it wasn't enough */
#ifdef DEBUG_INTERRUPT_ERROR
printk(KERN_INFO "%s: wavelan_watchdog: abort failed, trying reset\n",
dev->name);
#endif
wv_hw_reset(dev);
}
#ifdef DEBUG_PSA_SHOW
{
psa_t psa;
psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa));
wv_psa_show(&psa);
}
#endif
#ifdef DEBUG_MMC_SHOW
wv_mmc_show(dev);
#endif
#ifdef DEBUG_I82593_SHOW
wv_ru_show(dev);
#endif
/* We are no more waiting for something... */
netif_wake_queue(dev);
#ifdef DEBUG_INTERRUPT_TRACE
printk(KERN_DEBUG "%s: <-wavelan_watchdog()\n", dev->name);
#endif
}
/********************* CONFIGURATION CALLBACKS *********************/
/*
* Here are the functions called by the pcmcia package (cardmgr) and
* linux networking (NET3) for initialization, configuration and
* deinstallations of the Wavelan Pcmcia Hardware.
*/
/*------------------------------------------------------------------*/
/*
* Configure and start up the WaveLAN PCMCIA adaptor.
* Called by NET3 when it "open" the device.
*/
static int
wavelan_open(struct net_device * dev)
{
net_local * lp = netdev_priv(dev);
struct pcmcia_device * link = lp->link;
unsigned int base = dev->base_addr;
#ifdef DEBUG_CALLBACK_TRACE
printk(KERN_DEBUG "%s: ->wavelan_open(dev=0x%x)\n", dev->name,
(unsigned int) dev);
#endif
/* Check if the modem is powered up (wavelan_close() power it down */
if(hasr_read(base) & HASR_NO_CLK)
{
/* Power up (power up time is 250us) */
hacr_write(base, HACR_DEFAULT);
/* Check if the module has been powered up... */
if(hasr_read(base) & HASR_NO_CLK)
{
#ifdef DEBUG_CONFIG_ERRORS
printk(KERN_WARNING "%s: wavelan_open(): modem not connected\n",
dev->name);
#endif
return FALSE;
}
}
/* Start reception and declare the driver ready */
if(!lp->configured)
return FALSE;
if(!wv_ru_start(dev))
wv_hw_reset(dev); /* If problem : reset */
netif_start_queue(dev);
/* Mark the device as used */
link->open++;
#ifdef WAVELAN_ROAMING
if(do_roaming)
wv_roam_init(dev);
#endif /* WAVELAN_ROAMING */
#ifdef DEBUG_CALLBACK_TRACE
printk(KERN_DEBUG "%s: <-wavelan_open()\n", dev->name);
#endif
return 0;
}
/*------------------------------------------------------------------*/
/*
* Shutdown the WaveLAN PCMCIA adaptor.
* Called by NET3 when it "close" the device.
*/
static int
wavelan_close(struct net_device * dev)
{
struct pcmcia_device * link = ((net_local *)netdev_priv(dev))->link;
unsigned int base = dev->base_addr;
#ifdef DEBUG_CALLBACK_TRACE
printk(KERN_DEBUG "%s: ->wavelan_close(dev=0x%x)\n", dev->name,
(unsigned int) dev);
#endif
/* If the device isn't open, then nothing to do */
if(!link->open)
{
#ifdef DEBUG_CONFIG_INFO
printk(KERN_DEBUG "%s: wavelan_close(): device not open\n", dev->name);
#endif
return 0;
}
#ifdef WAVELAN_ROAMING
/* Cleanup of roaming stuff... */
if(do_roaming)
wv_roam_cleanup(dev);
#endif /* WAVELAN_ROAMING */
link->open--;
/* If the card is still present */
if(netif_running(dev))
{
netif_stop_queue(dev);
/* Stop receiving new messages and wait end of transmission */
wv_ru_stop(dev);
/* Power down the module */
hacr_write(base, HACR_DEFAULT & (~HACR_PWR_STAT));
}
#ifdef DEBUG_CALLBACK_TRACE
printk(KERN_DEBUG "%s: <-wavelan_close()\n", dev->name);
#endif
return 0;
}
/*------------------------------------------------------------------*/
/*
* wavelan_attach() creates an "instance" of the driver, allocating
* local data structures for one device (one interface). The device
* is registered with Card Services.
*
* The dev_link structure is initialized, but we don't actually
* configure the card at this point -- we wait until we receive a
* card insertion event.
*/
static int
wavelan_probe(struct pcmcia_device *p_dev)
{
struct net_device * dev; /* Interface generic data */
net_local * lp; /* Interface specific data */
int ret;
#ifdef DEBUG_CALLBACK_TRACE
printk(KERN_DEBUG "-> wavelan_attach()\n");
#endif
/* The io structure describes IO port mapping */
p_dev->io.NumPorts1 = 8;
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
p_dev->io.IOAddrLines = 3;
/* Interrupt setup */
p_dev->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
p_dev->irq.Handler = wavelan_interrupt;
/* General socket configuration */
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
p_dev->conf.IntType = INT_MEMORY_AND_IO;
/* Allocate the generic data structure */
dev = alloc_etherdev(sizeof(net_local));
if (!dev)
return -ENOMEM;
p_dev->priv = p_dev->irq.Instance = dev;
lp = netdev_priv(dev);
/* Init specific data */
lp->configured = 0;
lp->reconfig_82593 = FALSE;
lp->nresets = 0;
/* Multicast stuff */
lp->promiscuous = 0;
lp->allmulticast = 0;
lp->mc_count = 0;
/* Init spinlock */
spin_lock_init(&lp->spinlock);
/* back links */
lp->dev = dev;
/* wavelan NET3 callbacks */
dev->open = &wavelan_open;
dev->stop = &wavelan_close;
dev->hard_start_xmit = &wavelan_packet_xmit;
dev->get_stats = &wavelan_get_stats;
dev->set_multicast_list = &wavelan_set_multicast_list;
#ifdef SET_MAC_ADDRESS
dev->set_mac_address = &wavelan_set_mac_address;
#endif /* SET_MAC_ADDRESS */
/* Set the watchdog timer */
dev->tx_timeout = &wavelan_watchdog;
dev->watchdog_timeo = WATCHDOG_JIFFIES;
SET_ETHTOOL_OPS(dev, &ops);
dev->wireless_handlers = &wavelan_handler_def;
lp->wireless_data.spy_data = &lp->spy_data;
dev->wireless_data = &lp->wireless_data;
/* Other specific data */
dev->mtu = WAVELAN_MTU;
ret = wv_pcmcia_config(p_dev);
if (ret)
return ret;
ret = wv_hw_config(dev);
if (ret) {
dev->irq = 0;
pcmcia_disable_device(p_dev);
return ret;
}
wv_init_info(dev);
#ifdef DEBUG_CALLBACK_TRACE
printk(KERN_DEBUG "<- wavelan_attach()\n");
#endif
return 0;
}
/*------------------------------------------------------------------*/
/*
* This deletes a driver "instance". The device is de-registered with
* Card Services. If it has been released, all local data structures
* are freed. Otherwise, the structures will be freed when the device
* is released.
*/
static void
wavelan_detach(struct pcmcia_device *link)
{
#ifdef DEBUG_CALLBACK_TRACE
printk(KERN_DEBUG "-> wavelan_detach(0x%p)\n", link);
#endif
/* Some others haven't done their job : give them another chance */
wv_pcmcia_release(link);
/* Free pieces */
if(link->priv)
{
struct net_device * dev = (struct net_device *) link->priv;
/* Remove ourselves from the kernel list of ethernet devices */
/* Warning : can't be called from interrupt, timer or wavelan_close() */
if (link->dev_node)
unregister_netdev(dev);
link->dev_node = NULL;
((net_local *)netdev_priv(dev))->link = NULL;
((net_local *)netdev_priv(dev))->dev = NULL;
free_netdev(dev);
}
#ifdef DEBUG_CALLBACK_TRACE
printk(KERN_DEBUG "<- wavelan_detach()\n");
#endif
}
static int wavelan_suspend(struct pcmcia_device *link)
{
struct net_device * dev = (struct net_device *) link->priv;
/* NB: wavelan_close will be called, but too late, so we are
* obliged to close nicely the wavelan here. David, could you
* close the device before suspending them ? And, by the way,
* could you, on resume, add a "route add -net ..." after the
* ifconfig up ? Thanks... */
/* Stop receiving new messages and wait end of transmission */
wv_ru_stop(dev);
if (link->open)
netif_device_detach(dev);
/* Power down the module */
hacr_write(dev->base_addr, HACR_DEFAULT & (~HACR_PWR_STAT));
return 0;
}
static int wavelan_resume(struct pcmcia_device *link)
{
struct net_device * dev = (struct net_device *) link->priv;
if (link->open) {
wv_hw_reset(dev);
netif_device_attach(dev);
}
return 0;
}
static struct pcmcia_device_id wavelan_ids[] = {
PCMCIA_DEVICE_PROD_ID12("AT&T","WaveLAN/PCMCIA", 0xe7c5affd, 0x1bc50975),
PCMCIA_DEVICE_PROD_ID12("Digital", "RoamAbout/DS", 0x9999ab35, 0x00d05e06),
PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/PCMCIA", 0x23eb9949, 0x1bc50975),
PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/PCMCIA", 0x24358cd4, 0x1bc50975),
PCMCIA_DEVICE_NULL,
};
MODULE_DEVICE_TABLE(pcmcia, wavelan_ids);
static struct pcmcia_driver wavelan_driver = {
.owner = THIS_MODULE,
.drv = {
.name = "wavelan_cs",
},
.probe = wavelan_probe,
.remove = wavelan_detach,
.id_table = wavelan_ids,
.suspend = wavelan_suspend,
.resume = wavelan_resume,
};
static int __init
init_wavelan_cs(void)
{
return pcmcia_register_driver(&wavelan_driver);
}
static void __exit
exit_wavelan_cs(void)
{
pcmcia_unregister_driver(&wavelan_driver);
}
module_init(init_wavelan_cs);
module_exit(exit_wavelan_cs);