linux/arch/powerpc/kernel/vmlinux.lds.S
Tejun Heo 0415b00d17 percpu: Always align percpu output section to PAGE_SIZE
Percpu allocator honors alignment request upto PAGE_SIZE and both the
percpu addresses in the percpu address space and the translated kernel
addresses should be aligned accordingly.  The calculation of the
former depends on the alignment of percpu output section in the kernel
image.

The linker script macros PERCPU_VADDR() and PERCPU() are used to
define this output section and the latter takes @align parameter.
Several architectures are using @align smaller than PAGE_SIZE breaking
percpu memory alignment.

This patch removes @align parameter from PERCPU(), renames it to
PERCPU_SECTION() and makes it always align to PAGE_SIZE.  While at it,
add PCPU_SETUP_BUG_ON() checks such that alignment problems are
reliably detected and remove percpu alignment comment recently added
in workqueue.c as the condition would trigger BUG way before reaching
there.

For um, this patch raises the alignment of percpu area.  As the area
is in .init, there shouldn't be any noticeable difference.

This problem was discovered by David Howells while debugging boot
failure on mn10300.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Cc: uclinux-dist-devel@blackfin.uclinux.org
Cc: David Howells <dhowells@redhat.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: user-mode-linux-devel@lists.sourceforge.net
2011-03-24 18:50:09 +01:00

261 lines
5.3 KiB
ArmAsm

#ifdef CONFIG_PPC64
#define PROVIDE32(x) PROVIDE(__unused__##x)
#else
#define PROVIDE32(x) PROVIDE(x)
#endif
#include <asm/page.h>
#include <asm-generic/vmlinux.lds.h>
#include <asm/cache.h>
#include <asm/thread_info.h>
ENTRY(_stext)
PHDRS {
kernel PT_LOAD FLAGS(7); /* RWX */
notes PT_NOTE FLAGS(0);
dummy PT_NOTE FLAGS(0);
/* binutils < 2.18 has a bug that makes it misbehave when taking an
ELF file with all segments at load address 0 as input. This
happens when running "strip" on vmlinux, because of the AT() magic
in this linker script. People using GCC >= 4.2 won't run into
this problem, because the "build-id" support will put some data
into the "notes" segment (at a non-zero load address).
To work around this, we force some data into both the "dummy"
segment and the kernel segment, so the dummy segment will get a
non-zero load address. It's not enough to always create the
"notes" segment, since if nothing gets assigned to it, its load
address will be zero. */
}
#ifdef CONFIG_PPC64
OUTPUT_ARCH(powerpc:common64)
jiffies = jiffies_64;
#else
OUTPUT_ARCH(powerpc:common)
jiffies = jiffies_64 + 4;
#endif
SECTIONS
{
. = 0;
reloc_start = .;
. = KERNELBASE;
/*
* Text, read only data and other permanent read-only sections
*/
/* Text and gots */
.text : AT(ADDR(.text) - LOAD_OFFSET) {
ALIGN_FUNCTION();
HEAD_TEXT
_text = .;
/* careful! __ftr_alt_* sections need to be close to .text */
*(.text .fixup __ftr_alt_* .ref.text)
SCHED_TEXT
LOCK_TEXT
KPROBES_TEXT
IRQENTRY_TEXT
#ifdef CONFIG_PPC32
*(.got1)
__got2_start = .;
*(.got2)
__got2_end = .;
#endif /* CONFIG_PPC32 */
} :kernel
. = ALIGN(PAGE_SIZE);
_etext = .;
PROVIDE32 (etext = .);
/* Read-only data */
RODATA
EXCEPTION_TABLE(0)
NOTES :kernel :notes
/* The dummy segment contents for the bug workaround mentioned above
near PHDRS. */
.dummy : AT(ADDR(.dummy) - LOAD_OFFSET) {
LONG(0)
LONG(0)
LONG(0)
} :kernel :dummy
/*
* Init sections discarded at runtime
*/
. = ALIGN(PAGE_SIZE);
__init_begin = .;
INIT_TEXT_SECTION(PAGE_SIZE) :kernel
/* .exit.text is discarded at runtime, not link time,
* to deal with references from __bug_table
*/
.exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) {
EXIT_TEXT
}
.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
INIT_DATA
__vtop_table_begin = .;
*(.vtop_fixup);
__vtop_table_end = .;
__ptov_table_begin = .;
*(.ptov_fixup);
__ptov_table_end = .;
#ifdef CONFIG_PPC_ISERIES
__dt_strings_start = .;
*(.dt_strings);
__dt_strings_end = .;
#endif
}
.init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
INIT_SETUP(16)
}
.initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
INIT_CALLS
}
.con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
CON_INITCALL
}
SECURITY_INIT
. = ALIGN(8);
__ftr_fixup : AT(ADDR(__ftr_fixup) - LOAD_OFFSET) {
__start___ftr_fixup = .;
*(__ftr_fixup)
__stop___ftr_fixup = .;
}
. = ALIGN(8);
__mmu_ftr_fixup : AT(ADDR(__mmu_ftr_fixup) - LOAD_OFFSET) {
__start___mmu_ftr_fixup = .;
*(__mmu_ftr_fixup)
__stop___mmu_ftr_fixup = .;
}
. = ALIGN(8);
__lwsync_fixup : AT(ADDR(__lwsync_fixup) - LOAD_OFFSET) {
__start___lwsync_fixup = .;
*(__lwsync_fixup)
__stop___lwsync_fixup = .;
}
#ifdef CONFIG_PPC64
. = ALIGN(8);
__fw_ftr_fixup : AT(ADDR(__fw_ftr_fixup) - LOAD_OFFSET) {
__start___fw_ftr_fixup = .;
*(__fw_ftr_fixup)
__stop___fw_ftr_fixup = .;
}
#endif
.init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
INIT_RAM_FS
}
PERCPU_SECTION(L1_CACHE_BYTES)
. = ALIGN(8);
.machine.desc : AT(ADDR(.machine.desc) - LOAD_OFFSET) {
__machine_desc_start = . ;
*(.machine.desc)
__machine_desc_end = . ;
}
#ifdef CONFIG_RELOCATABLE
. = ALIGN(8);
.dynsym : AT(ADDR(.dynsym) - LOAD_OFFSET) { *(.dynsym) }
.dynstr : AT(ADDR(.dynstr) - LOAD_OFFSET) { *(.dynstr) }
.dynamic : AT(ADDR(.dynamic) - LOAD_OFFSET)
{
__dynamic_start = .;
*(.dynamic)
}
.hash : AT(ADDR(.hash) - LOAD_OFFSET) { *(.hash) }
.interp : AT(ADDR(.interp) - LOAD_OFFSET) { *(.interp) }
.rela.dyn : AT(ADDR(.rela.dyn) - LOAD_OFFSET)
{
__rela_dyn_start = .;
*(.rela*)
}
#endif
/* freed after init ends here */
. = ALIGN(PAGE_SIZE);
__init_end = .;
/*
* And now the various read/write data
*/
. = ALIGN(PAGE_SIZE);
_sdata = .;
#ifdef CONFIG_PPC32
.data : AT(ADDR(.data) - LOAD_OFFSET) {
DATA_DATA
*(.sdata)
*(.got.plt) *(.got)
}
#else
.data : AT(ADDR(.data) - LOAD_OFFSET) {
DATA_DATA
*(.data.rel*)
*(.toc1)
*(.branch_lt)
}
.opd : AT(ADDR(.opd) - LOAD_OFFSET) {
*(.opd)
}
.got : AT(ADDR(.got) - LOAD_OFFSET) {
__toc_start = .;
*(.got)
*(.toc)
}
#endif
/* The initial task and kernel stack */
INIT_TASK_DATA_SECTION(THREAD_SIZE)
.data..page_aligned : AT(ADDR(.data..page_aligned) - LOAD_OFFSET) {
PAGE_ALIGNED_DATA(PAGE_SIZE)
}
.data..cacheline_aligned : AT(ADDR(.data..cacheline_aligned) - LOAD_OFFSET) {
CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
}
.data..read_mostly : AT(ADDR(.data..read_mostly) - LOAD_OFFSET) {
READ_MOSTLY_DATA(L1_CACHE_BYTES)
}
. = ALIGN(PAGE_SIZE);
.data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
NOSAVE_DATA
}
. = ALIGN(PAGE_SIZE);
_edata = .;
PROVIDE32 (edata = .);
/*
* And finally the bss
*/
BSS_SECTION(0, 0, 0)
. = ALIGN(PAGE_SIZE);
_end = . ;
PROVIDE32 (end = .);
/* Sections to be discarded. */
DISCARDS
}