9542f502cf
STK807xPVR: correct the enumeration Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr> Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2834 lines
73 KiB
C
2834 lines
73 KiB
C
/* Linux driver for devices based on the DiBcom DiB0700 USB bridge
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the Free
|
|
* Software Foundation, version 2.
|
|
*
|
|
* Copyright (C) 2005-9 DiBcom, SA et al
|
|
*/
|
|
#include "dib0700.h"
|
|
|
|
#include "dib3000mc.h"
|
|
#include "dib7000m.h"
|
|
#include "dib7000p.h"
|
|
#include "dib8000.h"
|
|
#include "mt2060.h"
|
|
#include "mt2266.h"
|
|
#include "tuner-xc2028.h"
|
|
#include "xc5000.h"
|
|
#include "s5h1411.h"
|
|
#include "dib0070.h"
|
|
#include "dib0090.h"
|
|
#include "lgdt3305.h"
|
|
#include "mxl5007t.h"
|
|
|
|
static int force_lna_activation;
|
|
module_param(force_lna_activation, int, 0644);
|
|
MODULE_PARM_DESC(force_lna_activation, "force the activation of Low-Noise-Amplifyer(s) (LNA), "
|
|
"if applicable for the device (default: 0=automatic/off).");
|
|
|
|
struct dib0700_adapter_state {
|
|
int (*set_param_save) (struct dvb_frontend *, struct dvb_frontend_parameters *);
|
|
};
|
|
|
|
/* Hauppauge Nova-T 500 (aka Bristol)
|
|
* has a LNA on GPIO0 which is enabled by setting 1 */
|
|
static struct mt2060_config bristol_mt2060_config[2] = {
|
|
{
|
|
.i2c_address = 0x60,
|
|
.clock_out = 3,
|
|
}, {
|
|
.i2c_address = 0x61,
|
|
}
|
|
};
|
|
|
|
|
|
static struct dibx000_agc_config bristol_dib3000p_mt2060_agc_config = {
|
|
.band_caps = BAND_VHF | BAND_UHF,
|
|
.setup = (1 << 8) | (5 << 5) | (0 << 4) | (0 << 3) | (0 << 2) | (2 << 0),
|
|
|
|
.agc1_max = 42598,
|
|
.agc1_min = 17694,
|
|
.agc2_max = 45875,
|
|
.agc2_min = 0,
|
|
|
|
.agc1_pt1 = 0,
|
|
.agc1_pt2 = 59,
|
|
|
|
.agc1_slope1 = 0,
|
|
.agc1_slope2 = 69,
|
|
|
|
.agc2_pt1 = 0,
|
|
.agc2_pt2 = 59,
|
|
|
|
.agc2_slope1 = 111,
|
|
.agc2_slope2 = 28,
|
|
};
|
|
|
|
static struct dib3000mc_config bristol_dib3000mc_config[2] = {
|
|
{ .agc = &bristol_dib3000p_mt2060_agc_config,
|
|
.max_time = 0x196,
|
|
.ln_adc_level = 0x1cc7,
|
|
.output_mpeg2_in_188_bytes = 1,
|
|
},
|
|
{ .agc = &bristol_dib3000p_mt2060_agc_config,
|
|
.max_time = 0x196,
|
|
.ln_adc_level = 0x1cc7,
|
|
.output_mpeg2_in_188_bytes = 1,
|
|
}
|
|
};
|
|
|
|
static int bristol_frontend_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
struct dib0700_state *st = adap->dev->priv;
|
|
if (adap->id == 0) {
|
|
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10);
|
|
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10);
|
|
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10);
|
|
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10);
|
|
|
|
if (force_lna_activation)
|
|
dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
|
|
else
|
|
dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0);
|
|
|
|
if (dib3000mc_i2c_enumeration(&adap->dev->i2c_adap, 2, DEFAULT_DIB3000P_I2C_ADDRESS, bristol_dib3000mc_config) != 0) {
|
|
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10);
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
st->mt2060_if1[adap->id] = 1220;
|
|
return (adap->fe = dvb_attach(dib3000mc_attach, &adap->dev->i2c_adap,
|
|
(10 + adap->id) << 1, &bristol_dib3000mc_config[adap->id])) == NULL ? -ENODEV : 0;
|
|
}
|
|
|
|
static int eeprom_read(struct i2c_adapter *adap,u8 adrs,u8 *pval)
|
|
{
|
|
struct i2c_msg msg[2] = {
|
|
{ .addr = 0x50, .flags = 0, .buf = &adrs, .len = 1 },
|
|
{ .addr = 0x50, .flags = I2C_M_RD, .buf = pval, .len = 1 },
|
|
};
|
|
if (i2c_transfer(adap, msg, 2) != 2) return -EREMOTEIO;
|
|
return 0;
|
|
}
|
|
|
|
static int bristol_tuner_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap;
|
|
struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe, 1);
|
|
s8 a;
|
|
int if1=1220;
|
|
if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) &&
|
|
adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_500_2)) {
|
|
if (!eeprom_read(prim_i2c,0x59 + adap->id,&a)) if1=1220+a;
|
|
}
|
|
return dvb_attach(mt2060_attach,adap->fe, tun_i2c,&bristol_mt2060_config[adap->id],
|
|
if1) == NULL ? -ENODEV : 0;
|
|
}
|
|
|
|
/* STK7700D: Pinnacle/Terratec/Hauppauge Dual DVB-T Diversity */
|
|
|
|
/* MT226x */
|
|
static struct dibx000_agc_config stk7700d_7000p_mt2266_agc_config[2] = {
|
|
{
|
|
BAND_UHF,
|
|
|
|
/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1,
|
|
* P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
|
|
(0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8)
|
|
| (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
|
|
|
|
1130,
|
|
21,
|
|
|
|
0,
|
|
118,
|
|
|
|
0,
|
|
3530,
|
|
1,
|
|
0,
|
|
|
|
65535,
|
|
33770,
|
|
65535,
|
|
23592,
|
|
|
|
0,
|
|
62,
|
|
255,
|
|
64,
|
|
64,
|
|
132,
|
|
192,
|
|
80,
|
|
80,
|
|
|
|
17,
|
|
27,
|
|
23,
|
|
51,
|
|
|
|
1,
|
|
}, {
|
|
BAND_VHF | BAND_LBAND,
|
|
|
|
/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1,
|
|
* P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
|
|
(0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8)
|
|
| (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
|
|
|
|
2372,
|
|
21,
|
|
|
|
0,
|
|
118,
|
|
|
|
0,
|
|
3530,
|
|
1,
|
|
0,
|
|
|
|
65535,
|
|
0,
|
|
65535,
|
|
23592,
|
|
|
|
0,
|
|
128,
|
|
128,
|
|
128,
|
|
0,
|
|
128,
|
|
253,
|
|
81,
|
|
0,
|
|
|
|
17,
|
|
27,
|
|
23,
|
|
51,
|
|
|
|
1,
|
|
}
|
|
};
|
|
|
|
static struct dibx000_bandwidth_config stk7700d_mt2266_pll_config = {
|
|
60000, 30000,
|
|
1, 8, 3, 1, 0,
|
|
0, 0, 1, 1, 2,
|
|
(3 << 14) | (1 << 12) | (524 << 0),
|
|
0,
|
|
20452225,
|
|
};
|
|
|
|
static struct dib7000p_config stk7700d_dib7000p_mt2266_config[] = {
|
|
{ .output_mpeg2_in_188_bytes = 1,
|
|
.hostbus_diversity = 1,
|
|
.tuner_is_baseband = 1,
|
|
|
|
.agc_config_count = 2,
|
|
.agc = stk7700d_7000p_mt2266_agc_config,
|
|
.bw = &stk7700d_mt2266_pll_config,
|
|
|
|
.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
|
|
.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
|
|
.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
|
|
},
|
|
{ .output_mpeg2_in_188_bytes = 1,
|
|
.hostbus_diversity = 1,
|
|
.tuner_is_baseband = 1,
|
|
|
|
.agc_config_count = 2,
|
|
.agc = stk7700d_7000p_mt2266_agc_config,
|
|
.bw = &stk7700d_mt2266_pll_config,
|
|
|
|
.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
|
|
.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
|
|
.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
|
|
}
|
|
};
|
|
|
|
static struct mt2266_config stk7700d_mt2266_config[2] = {
|
|
{ .i2c_address = 0x60
|
|
},
|
|
{ .i2c_address = 0x60
|
|
}
|
|
};
|
|
|
|
static int stk7700P2_frontend_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
if (adap->id == 0) {
|
|
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
|
|
msleep(10);
|
|
dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
|
|
dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
|
|
dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
|
|
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
|
|
msleep(10);
|
|
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
|
|
msleep(10);
|
|
if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
|
|
stk7700d_dib7000p_mt2266_config)
|
|
!= 0) {
|
|
err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", __func__);
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap,0x80+(adap->id << 1),
|
|
&stk7700d_dib7000p_mt2266_config[adap->id]);
|
|
|
|
return adap->fe == NULL ? -ENODEV : 0;
|
|
}
|
|
|
|
static int stk7700d_frontend_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
if (adap->id == 0) {
|
|
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
|
|
msleep(10);
|
|
dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
|
|
dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
|
|
dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
|
|
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
|
|
msleep(10);
|
|
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
|
|
msleep(10);
|
|
dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
|
|
if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 2, 18,
|
|
stk7700d_dib7000p_mt2266_config)
|
|
!= 0) {
|
|
err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", __func__);
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap,0x80+(adap->id << 1),
|
|
&stk7700d_dib7000p_mt2266_config[adap->id]);
|
|
|
|
return adap->fe == NULL ? -ENODEV : 0;
|
|
}
|
|
|
|
static int stk7700d_tuner_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
struct i2c_adapter *tun_i2c;
|
|
tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
|
|
return dvb_attach(mt2266_attach, adap->fe, tun_i2c,
|
|
&stk7700d_mt2266_config[adap->id]) == NULL ? -ENODEV : 0;
|
|
}
|
|
|
|
/* STK7700-PH: Digital/Analog Hybrid Tuner, e.h. Cinergy HT USB HE */
|
|
static struct dibx000_agc_config xc3028_agc_config = {
|
|
BAND_VHF | BAND_UHF, /* band_caps */
|
|
|
|
/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0,
|
|
* P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
|
|
* P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
|
|
(0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) |
|
|
(3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), /* setup */
|
|
|
|
712, /* inv_gain */
|
|
21, /* time_stabiliz */
|
|
|
|
0, /* alpha_level */
|
|
118, /* thlock */
|
|
|
|
0, /* wbd_inv */
|
|
2867, /* wbd_ref */
|
|
0, /* wbd_sel */
|
|
2, /* wbd_alpha */
|
|
|
|
0, /* agc1_max */
|
|
0, /* agc1_min */
|
|
39718, /* agc2_max */
|
|
9930, /* agc2_min */
|
|
0, /* agc1_pt1 */
|
|
0, /* agc1_pt2 */
|
|
0, /* agc1_pt3 */
|
|
0, /* agc1_slope1 */
|
|
0, /* agc1_slope2 */
|
|
0, /* agc2_pt1 */
|
|
128, /* agc2_pt2 */
|
|
29, /* agc2_slope1 */
|
|
29, /* agc2_slope2 */
|
|
|
|
17, /* alpha_mant */
|
|
27, /* alpha_exp */
|
|
23, /* beta_mant */
|
|
51, /* beta_exp */
|
|
|
|
1, /* perform_agc_softsplit */
|
|
};
|
|
|
|
/* PLL Configuration for COFDM BW_MHz = 8.00 with external clock = 30.00 */
|
|
static struct dibx000_bandwidth_config xc3028_bw_config = {
|
|
60000, 30000, /* internal, sampling */
|
|
1, 8, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass */
|
|
0, 0, 1, 1, 0, /* misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc,
|
|
modulo */
|
|
(3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */
|
|
(1 << 25) | 5816102, /* ifreq = 5.200000 MHz */
|
|
20452225, /* timf */
|
|
30000000, /* xtal_hz */
|
|
};
|
|
|
|
static struct dib7000p_config stk7700ph_dib7700_xc3028_config = {
|
|
.output_mpeg2_in_188_bytes = 1,
|
|
.tuner_is_baseband = 1,
|
|
|
|
.agc_config_count = 1,
|
|
.agc = &xc3028_agc_config,
|
|
.bw = &xc3028_bw_config,
|
|
|
|
.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
|
|
.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
|
|
.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
|
|
};
|
|
|
|
static int stk7700ph_xc3028_callback(void *ptr, int component,
|
|
int command, int arg)
|
|
{
|
|
struct dvb_usb_adapter *adap = ptr;
|
|
|
|
switch (command) {
|
|
case XC2028_TUNER_RESET:
|
|
/* Send the tuner in then out of reset */
|
|
dib7000p_set_gpio(adap->fe, 8, 0, 0); msleep(10);
|
|
dib7000p_set_gpio(adap->fe, 8, 0, 1);
|
|
break;
|
|
case XC2028_RESET_CLK:
|
|
break;
|
|
default:
|
|
err("%s: unknown command %d, arg %d\n", __func__,
|
|
command, arg);
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static struct xc2028_ctrl stk7700ph_xc3028_ctrl = {
|
|
.fname = XC2028_DEFAULT_FIRMWARE,
|
|
.max_len = 64,
|
|
.demod = XC3028_FE_DIBCOM52,
|
|
};
|
|
|
|
static struct xc2028_config stk7700ph_xc3028_config = {
|
|
.i2c_addr = 0x61,
|
|
.ctrl = &stk7700ph_xc3028_ctrl,
|
|
};
|
|
|
|
static int stk7700ph_frontend_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
struct usb_device_descriptor *desc = &adap->dev->udev->descriptor;
|
|
|
|
if (desc->idVendor == cpu_to_le16(USB_VID_PINNACLE) &&
|
|
desc->idProduct == cpu_to_le16(USB_PID_PINNACLE_EXPRESSCARD_320CX))
|
|
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
|
|
else
|
|
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
|
|
msleep(20);
|
|
dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
|
|
dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
|
|
dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
|
|
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
|
|
msleep(10);
|
|
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
|
|
msleep(20);
|
|
dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
|
|
msleep(10);
|
|
|
|
if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
|
|
&stk7700ph_dib7700_xc3028_config) != 0) {
|
|
err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n",
|
|
__func__);
|
|
return -ENODEV;
|
|
}
|
|
|
|
adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
|
|
&stk7700ph_dib7700_xc3028_config);
|
|
|
|
return adap->fe == NULL ? -ENODEV : 0;
|
|
}
|
|
|
|
static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
struct i2c_adapter *tun_i2c;
|
|
|
|
tun_i2c = dib7000p_get_i2c_master(adap->fe,
|
|
DIBX000_I2C_INTERFACE_TUNER, 1);
|
|
|
|
stk7700ph_xc3028_config.i2c_adap = tun_i2c;
|
|
|
|
/* FIXME: generalize & move to common area */
|
|
adap->fe->callback = stk7700ph_xc3028_callback;
|
|
|
|
return dvb_attach(xc2028_attach, adap->fe, &stk7700ph_xc3028_config)
|
|
== NULL ? -ENODEV : 0;
|
|
}
|
|
|
|
#define DEFAULT_RC_INTERVAL 50
|
|
|
|
static u8 rc_request[] = { REQUEST_POLL_RC, 0 };
|
|
|
|
/* Number of keypresses to ignore before start repeating */
|
|
#define RC_REPEAT_DELAY 6
|
|
#define RC_REPEAT_DELAY_V1_20 10
|
|
|
|
|
|
|
|
/* Used by firmware versions < 1.20 (deprecated) */
|
|
static int dib0700_rc_query_legacy(struct dvb_usb_device *d, u32 *event,
|
|
int *state)
|
|
{
|
|
u8 key[4];
|
|
int i;
|
|
struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
|
|
struct dib0700_state *st = d->priv;
|
|
*event = 0;
|
|
*state = REMOTE_NO_KEY_PRESSED;
|
|
i=dib0700_ctrl_rd(d,rc_request,2,key,4);
|
|
if (i<=0) {
|
|
err("RC Query Failed");
|
|
return -1;
|
|
}
|
|
|
|
/* losing half of KEY_0 events from Philipps rc5 remotes.. */
|
|
if (key[0]==0 && key[1]==0 && key[2]==0 && key[3]==0) return 0;
|
|
|
|
/* info("%d: %2X %2X %2X %2X",dvb_usb_dib0700_ir_proto,(int)key[3-2],(int)key[3-3],(int)key[3-1],(int)key[3]); */
|
|
|
|
dib0700_rc_setup(d); /* reset ir sensor data to prevent false events */
|
|
|
|
switch (dvb_usb_dib0700_ir_proto) {
|
|
case 0: {
|
|
/* NEC protocol sends repeat code as 0 0 0 FF */
|
|
if ((key[3-2] == 0x00) && (key[3-3] == 0x00) &&
|
|
(key[3] == 0xFF)) {
|
|
st->rc_counter++;
|
|
if (st->rc_counter > RC_REPEAT_DELAY) {
|
|
*event = d->last_event;
|
|
*state = REMOTE_KEY_PRESSED;
|
|
st->rc_counter = RC_REPEAT_DELAY;
|
|
}
|
|
return 0;
|
|
}
|
|
for (i=0;i<d->props.rc_key_map_size; i++) {
|
|
if (rc5_custom(&keymap[i]) == key[3-2] &&
|
|
rc5_data(&keymap[i]) == key[3-3]) {
|
|
st->rc_counter = 0;
|
|
*event = keymap[i].event;
|
|
*state = REMOTE_KEY_PRESSED;
|
|
d->last_event = keymap[i].event;
|
|
return 0;
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
default: {
|
|
/* RC-5 protocol changes toggle bit on new keypress */
|
|
for (i = 0; i < d->props.rc_key_map_size; i++) {
|
|
if (rc5_custom(&keymap[i]) == key[3-2] &&
|
|
rc5_data(&keymap[i]) == key[3-3]) {
|
|
if (d->last_event == keymap[i].event &&
|
|
key[3-1] == st->rc_toggle) {
|
|
st->rc_counter++;
|
|
/* prevents unwanted double hits */
|
|
if (st->rc_counter > RC_REPEAT_DELAY) {
|
|
*event = d->last_event;
|
|
*state = REMOTE_KEY_PRESSED;
|
|
st->rc_counter = RC_REPEAT_DELAY;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
st->rc_counter = 0;
|
|
*event = keymap[i].event;
|
|
*state = REMOTE_KEY_PRESSED;
|
|
st->rc_toggle = key[3-1];
|
|
d->last_event = keymap[i].event;
|
|
return 0;
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
err("Unknown remote controller key: %2X %2X %2X %2X", (int) key[3-2], (int) key[3-3], (int) key[3-1], (int) key[3]);
|
|
d->last_event = 0;
|
|
return 0;
|
|
}
|
|
|
|
/* This is the structure of the RC response packet starting in firmware 1.20 */
|
|
struct dib0700_rc_response {
|
|
u8 report_id;
|
|
u8 data_state;
|
|
u16 system;
|
|
u8 data;
|
|
u8 not_data;
|
|
};
|
|
|
|
/* This supports the new IR response format for firmware v1.20 */
|
|
static int dib0700_rc_query_v1_20(struct dvb_usb_device *d, u32 *event,
|
|
int *state)
|
|
{
|
|
struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
|
|
struct dib0700_state *st = d->priv;
|
|
struct dib0700_rc_response poll_reply;
|
|
u8 buf[6];
|
|
int i;
|
|
int status;
|
|
int actlen;
|
|
int found = 0;
|
|
|
|
/* Set initial results in case we exit the function early */
|
|
*event = 0;
|
|
*state = REMOTE_NO_KEY_PRESSED;
|
|
|
|
/* Firmware v1.20 provides RC data via bulk endpoint 1 */
|
|
status = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev, 1), buf,
|
|
sizeof(buf), &actlen, 50);
|
|
if (status < 0) {
|
|
/* No data available (meaning no key press) */
|
|
return 0;
|
|
}
|
|
|
|
|
|
switch (dvb_usb_dib0700_ir_proto) {
|
|
case 0:
|
|
poll_reply.report_id = 0;
|
|
poll_reply.data_state = 1;
|
|
poll_reply.system = buf[2];
|
|
poll_reply.data = buf[4];
|
|
poll_reply.not_data = buf[5];
|
|
|
|
/* NEC protocol sends repeat code as 0 0 0 FF */
|
|
if ((poll_reply.system == 0x00) && (poll_reply.data == 0x00)
|
|
&& (poll_reply.not_data == 0xff)) {
|
|
poll_reply.data_state = 2;
|
|
break;
|
|
}
|
|
break;
|
|
default:
|
|
if (actlen != sizeof(buf)) {
|
|
/* We didn't get back the 6 byte message we expected */
|
|
err("Unexpected RC response size [%d]", actlen);
|
|
return -1;
|
|
}
|
|
|
|
poll_reply.report_id = buf[0];
|
|
poll_reply.data_state = buf[1];
|
|
poll_reply.system = (buf[2] << 8) | buf[3];
|
|
poll_reply.data = buf[4];
|
|
poll_reply.not_data = buf[5];
|
|
|
|
break;
|
|
}
|
|
|
|
if ((poll_reply.data + poll_reply.not_data) != 0xff) {
|
|
/* Key failed integrity check */
|
|
err("key failed integrity check: %04x %02x %02x",
|
|
poll_reply.system,
|
|
poll_reply.data, poll_reply.not_data);
|
|
return -1;
|
|
}
|
|
|
|
|
|
/* Find the key in the map */
|
|
for (i = 0; i < d->props.rc_key_map_size; i++) {
|
|
if (rc5_custom(&keymap[i]) == (poll_reply.system & 0xff) &&
|
|
rc5_data(&keymap[i]) == poll_reply.data) {
|
|
*event = keymap[i].event;
|
|
found = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (found == 0) {
|
|
err("Unknown remote controller key: %04x %02x %02x",
|
|
poll_reply.system,
|
|
poll_reply.data, poll_reply.not_data);
|
|
d->last_event = 0;
|
|
return 0;
|
|
}
|
|
|
|
if (poll_reply.data_state == 1) {
|
|
/* New key hit */
|
|
st->rc_counter = 0;
|
|
*event = keymap[i].event;
|
|
*state = REMOTE_KEY_PRESSED;
|
|
d->last_event = keymap[i].event;
|
|
} else if (poll_reply.data_state == 2) {
|
|
/* Key repeated */
|
|
st->rc_counter++;
|
|
|
|
/* prevents unwanted double hits */
|
|
if (st->rc_counter > RC_REPEAT_DELAY_V1_20) {
|
|
*event = d->last_event;
|
|
*state = REMOTE_KEY_PRESSED;
|
|
st->rc_counter = RC_REPEAT_DELAY_V1_20;
|
|
}
|
|
} else {
|
|
err("Unknown data state [%d]", poll_reply.data_state);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
|
|
{
|
|
struct dib0700_state *st = d->priv;
|
|
|
|
/* Because some people may have improperly named firmware files,
|
|
let's figure out whether to use the new firmware call or the legacy
|
|
call based on the firmware version embedded in the file */
|
|
if (st->rc_func_version == 0) {
|
|
u32 hwver, romver, ramver, fwtype;
|
|
int ret = dib0700_get_version(d, &hwver, &romver, &ramver,
|
|
&fwtype);
|
|
if (ret < 0) {
|
|
err("Could not determine version info");
|
|
return -1;
|
|
}
|
|
if (ramver < 0x10200)
|
|
st->rc_func_version = 1;
|
|
else
|
|
st->rc_func_version = 2;
|
|
}
|
|
|
|
if (st->rc_func_version == 2)
|
|
return dib0700_rc_query_v1_20(d, event, state);
|
|
else
|
|
return dib0700_rc_query_legacy(d, event, state);
|
|
}
|
|
|
|
static struct dvb_usb_rc_key dib0700_rc_keys[] = {
|
|
/* Key codes for the tiny Pinnacle remote*/
|
|
{ 0x0700, KEY_MUTE },
|
|
{ 0x0701, KEY_MENU }, /* Pinnacle logo */
|
|
{ 0x0739, KEY_POWER },
|
|
{ 0x0703, KEY_VOLUMEUP },
|
|
{ 0x0709, KEY_VOLUMEDOWN },
|
|
{ 0x0706, KEY_CHANNELUP },
|
|
{ 0x070c, KEY_CHANNELDOWN },
|
|
{ 0x070f, KEY_1 },
|
|
{ 0x0715, KEY_2 },
|
|
{ 0x0710, KEY_3 },
|
|
{ 0x0718, KEY_4 },
|
|
{ 0x071b, KEY_5 },
|
|
{ 0x071e, KEY_6 },
|
|
{ 0x0711, KEY_7 },
|
|
{ 0x0721, KEY_8 },
|
|
{ 0x0712, KEY_9 },
|
|
{ 0x0727, KEY_0 },
|
|
{ 0x0724, KEY_SCREEN }, /* 'Square' key */
|
|
{ 0x072a, KEY_TEXT }, /* 'T' key */
|
|
{ 0x072d, KEY_REWIND },
|
|
{ 0x0730, KEY_PLAY },
|
|
{ 0x0733, KEY_FASTFORWARD },
|
|
{ 0x0736, KEY_RECORD },
|
|
{ 0x073c, KEY_STOP },
|
|
{ 0x073f, KEY_CANCEL }, /* '?' key */
|
|
/* Key codes for the Terratec Cinergy DT XS Diversity, similar to cinergyT2.c */
|
|
{ 0xeb01, KEY_POWER },
|
|
{ 0xeb02, KEY_1 },
|
|
{ 0xeb03, KEY_2 },
|
|
{ 0xeb04, KEY_3 },
|
|
{ 0xeb05, KEY_4 },
|
|
{ 0xeb06, KEY_5 },
|
|
{ 0xeb07, KEY_6 },
|
|
{ 0xeb08, KEY_7 },
|
|
{ 0xeb09, KEY_8 },
|
|
{ 0xeb0a, KEY_9 },
|
|
{ 0xeb0b, KEY_VIDEO },
|
|
{ 0xeb0c, KEY_0 },
|
|
{ 0xeb0d, KEY_REFRESH },
|
|
{ 0xeb0f, KEY_EPG },
|
|
{ 0xeb10, KEY_UP },
|
|
{ 0xeb11, KEY_LEFT },
|
|
{ 0xeb12, KEY_OK },
|
|
{ 0xeb13, KEY_RIGHT },
|
|
{ 0xeb14, KEY_DOWN },
|
|
{ 0xeb16, KEY_INFO },
|
|
{ 0xeb17, KEY_RED },
|
|
{ 0xeb18, KEY_GREEN },
|
|
{ 0xeb19, KEY_YELLOW },
|
|
{ 0xeb1a, KEY_BLUE },
|
|
{ 0xeb1b, KEY_CHANNELUP },
|
|
{ 0xeb1c, KEY_VOLUMEUP },
|
|
{ 0xeb1d, KEY_MUTE },
|
|
{ 0xeb1e, KEY_VOLUMEDOWN },
|
|
{ 0xeb1f, KEY_CHANNELDOWN },
|
|
{ 0xeb40, KEY_PAUSE },
|
|
{ 0xeb41, KEY_HOME },
|
|
{ 0xeb42, KEY_MENU }, /* DVD Menu */
|
|
{ 0xeb43, KEY_SUBTITLE },
|
|
{ 0xeb44, KEY_TEXT }, /* Teletext */
|
|
{ 0xeb45, KEY_DELETE },
|
|
{ 0xeb46, KEY_TV },
|
|
{ 0xeb47, KEY_DVD },
|
|
{ 0xeb48, KEY_STOP },
|
|
{ 0xeb49, KEY_VIDEO },
|
|
{ 0xeb4a, KEY_AUDIO }, /* Music */
|
|
{ 0xeb4b, KEY_SCREEN }, /* Pic */
|
|
{ 0xeb4c, KEY_PLAY },
|
|
{ 0xeb4d, KEY_BACK },
|
|
{ 0xeb4e, KEY_REWIND },
|
|
{ 0xeb4f, KEY_FASTFORWARD },
|
|
{ 0xeb54, KEY_PREVIOUS },
|
|
{ 0xeb58, KEY_RECORD },
|
|
{ 0xeb5c, KEY_NEXT },
|
|
|
|
/* Key codes for the Haupauge WinTV Nova-TD, copied from nova-t-usb2.c (Nova-T USB2) */
|
|
{ 0x1e00, KEY_0 },
|
|
{ 0x1e01, KEY_1 },
|
|
{ 0x1e02, KEY_2 },
|
|
{ 0x1e03, KEY_3 },
|
|
{ 0x1e04, KEY_4 },
|
|
{ 0x1e05, KEY_5 },
|
|
{ 0x1e06, KEY_6 },
|
|
{ 0x1e07, KEY_7 },
|
|
{ 0x1e08, KEY_8 },
|
|
{ 0x1e09, KEY_9 },
|
|
{ 0x1e0a, KEY_KPASTERISK },
|
|
{ 0x1e0b, KEY_RED },
|
|
{ 0x1e0c, KEY_RADIO },
|
|
{ 0x1e0d, KEY_MENU },
|
|
{ 0x1e0e, KEY_GRAVE }, /* # */
|
|
{ 0x1e0f, KEY_MUTE },
|
|
{ 0x1e10, KEY_VOLUMEUP },
|
|
{ 0x1e11, KEY_VOLUMEDOWN },
|
|
{ 0x1e12, KEY_CHANNEL },
|
|
{ 0x1e14, KEY_UP },
|
|
{ 0x1e15, KEY_DOWN },
|
|
{ 0x1e16, KEY_LEFT },
|
|
{ 0x1e17, KEY_RIGHT },
|
|
{ 0x1e18, KEY_VIDEO },
|
|
{ 0x1e19, KEY_AUDIO },
|
|
{ 0x1e1a, KEY_MEDIA },
|
|
{ 0x1e1b, KEY_EPG },
|
|
{ 0x1e1c, KEY_TV },
|
|
{ 0x1e1e, KEY_NEXT },
|
|
{ 0x1e1f, KEY_BACK },
|
|
{ 0x1e20, KEY_CHANNELUP },
|
|
{ 0x1e21, KEY_CHANNELDOWN },
|
|
{ 0x1e24, KEY_LAST }, /* Skip backwards */
|
|
{ 0x1e25, KEY_OK },
|
|
{ 0x1e29, KEY_BLUE},
|
|
{ 0x1e2e, KEY_GREEN },
|
|
{ 0x1e30, KEY_PAUSE },
|
|
{ 0x1e32, KEY_REWIND },
|
|
{ 0x1e34, KEY_FASTFORWARD },
|
|
{ 0x1e35, KEY_PLAY },
|
|
{ 0x1e36, KEY_STOP },
|
|
{ 0x1e37, KEY_RECORD },
|
|
{ 0x1e38, KEY_YELLOW },
|
|
{ 0x1e3b, KEY_GOTO },
|
|
{ 0x1e3d, KEY_POWER },
|
|
|
|
/* Key codes for the Leadtek Winfast DTV Dongle */
|
|
{ 0x0042, KEY_POWER },
|
|
{ 0x077c, KEY_TUNER },
|
|
{ 0x0f4e, KEY_PRINT }, /* PREVIEW */
|
|
{ 0x0840, KEY_SCREEN }, /* full screen toggle*/
|
|
{ 0x0f71, KEY_DOT }, /* frequency */
|
|
{ 0x0743, KEY_0 },
|
|
{ 0x0c41, KEY_1 },
|
|
{ 0x0443, KEY_2 },
|
|
{ 0x0b7f, KEY_3 },
|
|
{ 0x0e41, KEY_4 },
|
|
{ 0x0643, KEY_5 },
|
|
{ 0x097f, KEY_6 },
|
|
{ 0x0d7e, KEY_7 },
|
|
{ 0x057c, KEY_8 },
|
|
{ 0x0a40, KEY_9 },
|
|
{ 0x0e4e, KEY_CLEAR },
|
|
{ 0x047c, KEY_CHANNEL }, /* show channel number */
|
|
{ 0x0f41, KEY_LAST }, /* recall */
|
|
{ 0x0342, KEY_MUTE },
|
|
{ 0x064c, KEY_RESERVED }, /* PIP button*/
|
|
{ 0x0172, KEY_SHUFFLE }, /* SNAPSHOT */
|
|
{ 0x0c4e, KEY_PLAYPAUSE }, /* TIMESHIFT */
|
|
{ 0x0b70, KEY_RECORD },
|
|
{ 0x037d, KEY_VOLUMEUP },
|
|
{ 0x017d, KEY_VOLUMEDOWN },
|
|
{ 0x0242, KEY_CHANNELUP },
|
|
{ 0x007d, KEY_CHANNELDOWN },
|
|
|
|
/* Key codes for Nova-TD "credit card" remote control. */
|
|
{ 0x1d00, KEY_0 },
|
|
{ 0x1d01, KEY_1 },
|
|
{ 0x1d02, KEY_2 },
|
|
{ 0x1d03, KEY_3 },
|
|
{ 0x1d04, KEY_4 },
|
|
{ 0x1d05, KEY_5 },
|
|
{ 0x1d06, KEY_6 },
|
|
{ 0x1d07, KEY_7 },
|
|
{ 0x1d08, KEY_8 },
|
|
{ 0x1d09, KEY_9 },
|
|
{ 0x1d0a, KEY_TEXT },
|
|
{ 0x1d0d, KEY_MENU },
|
|
{ 0x1d0f, KEY_MUTE },
|
|
{ 0x1d10, KEY_VOLUMEUP },
|
|
{ 0x1d11, KEY_VOLUMEDOWN },
|
|
{ 0x1d12, KEY_CHANNEL },
|
|
{ 0x1d14, KEY_UP },
|
|
{ 0x1d15, KEY_DOWN },
|
|
{ 0x1d16, KEY_LEFT },
|
|
{ 0x1d17, KEY_RIGHT },
|
|
{ 0x1d1c, KEY_TV },
|
|
{ 0x1d1e, KEY_NEXT },
|
|
{ 0x1d1f, KEY_BACK },
|
|
{ 0x1d20, KEY_CHANNELUP },
|
|
{ 0x1d21, KEY_CHANNELDOWN },
|
|
{ 0x1d24, KEY_LAST },
|
|
{ 0x1d25, KEY_OK },
|
|
{ 0x1d30, KEY_PAUSE },
|
|
{ 0x1d32, KEY_REWIND },
|
|
{ 0x1d34, KEY_FASTFORWARD },
|
|
{ 0x1d35, KEY_PLAY },
|
|
{ 0x1d36, KEY_STOP },
|
|
{ 0x1d37, KEY_RECORD },
|
|
{ 0x1d3b, KEY_GOTO },
|
|
{ 0x1d3d, KEY_POWER },
|
|
|
|
/* Key codes for the Pixelview SBTVD remote (proto NEC) */
|
|
{ 0x8613, KEY_MUTE },
|
|
{ 0x8612, KEY_POWER },
|
|
{ 0x8601, KEY_1 },
|
|
{ 0x8602, KEY_2 },
|
|
{ 0x8603, KEY_3 },
|
|
{ 0x8604, KEY_4 },
|
|
{ 0x8605, KEY_5 },
|
|
{ 0x8606, KEY_6 },
|
|
{ 0x8607, KEY_7 },
|
|
{ 0x8608, KEY_8 },
|
|
{ 0x8609, KEY_9 },
|
|
{ 0x8600, KEY_0 },
|
|
{ 0x860d, KEY_CHANNELUP },
|
|
{ 0x8619, KEY_CHANNELDOWN },
|
|
{ 0x8610, KEY_VOLUMEUP },
|
|
{ 0x860c, KEY_VOLUMEDOWN },
|
|
|
|
{ 0x860a, KEY_CAMERA },
|
|
{ 0x860b, KEY_ZOOM },
|
|
{ 0x861b, KEY_BACKSPACE },
|
|
{ 0x8615, KEY_ENTER },
|
|
|
|
{ 0x861d, KEY_UP },
|
|
{ 0x861e, KEY_DOWN },
|
|
{ 0x860e, KEY_LEFT },
|
|
{ 0x860f, KEY_RIGHT },
|
|
|
|
{ 0x8618, KEY_RECORD },
|
|
{ 0x861a, KEY_STOP },
|
|
|
|
/* Key codes for the EvolutePC TVWay+ remote (proto NEC) */
|
|
{ 0x7a00, KEY_MENU },
|
|
{ 0x7a01, KEY_RECORD },
|
|
{ 0x7a02, KEY_PLAY },
|
|
{ 0x7a03, KEY_STOP },
|
|
{ 0x7a10, KEY_CHANNELUP },
|
|
{ 0x7a11, KEY_CHANNELDOWN },
|
|
{ 0x7a12, KEY_VOLUMEUP },
|
|
{ 0x7a13, KEY_VOLUMEDOWN },
|
|
{ 0x7a40, KEY_POWER },
|
|
{ 0x7a41, KEY_MUTE },
|
|
};
|
|
|
|
/* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */
|
|
static struct dibx000_agc_config stk7700p_7000m_mt2060_agc_config = {
|
|
BAND_UHF | BAND_VHF,
|
|
|
|
/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
|
|
* P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
|
|
(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
|
|
| (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
|
|
|
|
712,
|
|
41,
|
|
|
|
0,
|
|
118,
|
|
|
|
0,
|
|
4095,
|
|
0,
|
|
0,
|
|
|
|
42598,
|
|
17694,
|
|
45875,
|
|
2621,
|
|
0,
|
|
76,
|
|
139,
|
|
52,
|
|
59,
|
|
107,
|
|
172,
|
|
57,
|
|
70,
|
|
|
|
21,
|
|
25,
|
|
28,
|
|
48,
|
|
|
|
1,
|
|
{ 0,
|
|
107,
|
|
51800,
|
|
24700
|
|
},
|
|
};
|
|
|
|
static struct dibx000_agc_config stk7700p_7000p_mt2060_agc_config = {
|
|
BAND_UHF | BAND_VHF,
|
|
|
|
/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
|
|
* P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
|
|
(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
|
|
| (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
|
|
|
|
712,
|
|
41,
|
|
|
|
0,
|
|
118,
|
|
|
|
0,
|
|
4095,
|
|
0,
|
|
0,
|
|
|
|
42598,
|
|
16384,
|
|
42598,
|
|
0,
|
|
|
|
0,
|
|
137,
|
|
255,
|
|
|
|
0,
|
|
255,
|
|
|
|
0,
|
|
0,
|
|
|
|
0,
|
|
41,
|
|
|
|
15,
|
|
25,
|
|
|
|
28,
|
|
48,
|
|
|
|
0,
|
|
};
|
|
|
|
static struct dibx000_bandwidth_config stk7700p_pll_config = {
|
|
60000, 30000,
|
|
1, 8, 3, 1, 0,
|
|
0, 0, 1, 1, 0,
|
|
(3 << 14) | (1 << 12) | (524 << 0),
|
|
60258167,
|
|
20452225,
|
|
30000000,
|
|
};
|
|
|
|
static struct dib7000m_config stk7700p_dib7000m_config = {
|
|
.dvbt_mode = 1,
|
|
.output_mpeg2_in_188_bytes = 1,
|
|
.quartz_direct = 1,
|
|
|
|
.agc_config_count = 1,
|
|
.agc = &stk7700p_7000m_mt2060_agc_config,
|
|
.bw = &stk7700p_pll_config,
|
|
|
|
.gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
|
|
.gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
|
|
.gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
|
|
};
|
|
|
|
static struct dib7000p_config stk7700p_dib7000p_config = {
|
|
.output_mpeg2_in_188_bytes = 1,
|
|
|
|
.agc_config_count = 1,
|
|
.agc = &stk7700p_7000p_mt2060_agc_config,
|
|
.bw = &stk7700p_pll_config,
|
|
|
|
.gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
|
|
.gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
|
|
.gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
|
|
};
|
|
|
|
static int stk7700p_frontend_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
struct dib0700_state *st = adap->dev->priv;
|
|
/* unless there is no real power management in DVB - we leave the device on GPIO6 */
|
|
|
|
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
|
|
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(50);
|
|
|
|
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10);
|
|
dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
|
|
|
|
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10);
|
|
dib0700_ctrl_clock(adap->dev, 72, 1);
|
|
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(100);
|
|
|
|
dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
|
|
|
|
st->mt2060_if1[0] = 1220;
|
|
|
|
if (dib7000pc_detection(&adap->dev->i2c_adap)) {
|
|
adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000p_config);
|
|
st->is_dib7000pc = 1;
|
|
} else
|
|
adap->fe = dvb_attach(dib7000m_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000m_config);
|
|
|
|
return adap->fe == NULL ? -ENODEV : 0;
|
|
}
|
|
|
|
static struct mt2060_config stk7700p_mt2060_config = {
|
|
0x60
|
|
};
|
|
|
|
static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap;
|
|
struct dib0700_state *st = adap->dev->priv;
|
|
struct i2c_adapter *tun_i2c;
|
|
s8 a;
|
|
int if1=1220;
|
|
if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) &&
|
|
adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_STICK)) {
|
|
if (!eeprom_read(prim_i2c,0x58,&a)) if1=1220+a;
|
|
}
|
|
if (st->is_dib7000pc)
|
|
tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
|
|
else
|
|
tun_i2c = dib7000m_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
|
|
|
|
return dvb_attach(mt2060_attach, adap->fe, tun_i2c, &stk7700p_mt2060_config,
|
|
if1) == NULL ? -ENODEV : 0;
|
|
}
|
|
|
|
/* DIB7070 generic */
|
|
static struct dibx000_agc_config dib7070_agc_config = {
|
|
BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
|
|
/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
|
|
* P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
|
|
(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
|
|
| (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
|
|
|
|
600,
|
|
10,
|
|
|
|
0,
|
|
118,
|
|
|
|
0,
|
|
3530,
|
|
1,
|
|
5,
|
|
|
|
65535,
|
|
0,
|
|
|
|
65535,
|
|
0,
|
|
|
|
0,
|
|
40,
|
|
183,
|
|
206,
|
|
255,
|
|
72,
|
|
152,
|
|
88,
|
|
90,
|
|
|
|
17,
|
|
27,
|
|
23,
|
|
51,
|
|
|
|
0,
|
|
};
|
|
|
|
static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff)
|
|
{
|
|
deb_info("reset: %d", onoff);
|
|
return dib7000p_set_gpio(fe, 8, 0, !onoff);
|
|
}
|
|
|
|
static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff)
|
|
{
|
|
deb_info("sleep: %d", onoff);
|
|
return dib7000p_set_gpio(fe, 9, 0, onoff);
|
|
}
|
|
|
|
static struct dib0070_config dib7070p_dib0070_config[2] = {
|
|
{
|
|
.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
|
|
.reset = dib7070_tuner_reset,
|
|
.sleep = dib7070_tuner_sleep,
|
|
.clock_khz = 12000,
|
|
.clock_pad_drive = 4,
|
|
.charge_pump = 2,
|
|
}, {
|
|
.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
|
|
.reset = dib7070_tuner_reset,
|
|
.sleep = dib7070_tuner_sleep,
|
|
.clock_khz = 12000,
|
|
.charge_pump = 2,
|
|
}
|
|
};
|
|
|
|
static struct dib0070_config dib7770p_dib0070_config = {
|
|
.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
|
|
.reset = dib7070_tuner_reset,
|
|
.sleep = dib7070_tuner_sleep,
|
|
.clock_khz = 12000,
|
|
.clock_pad_drive = 0,
|
|
.flip_chip = 1,
|
|
.charge_pump = 2,
|
|
};
|
|
|
|
static int dib7070_set_param_override(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep)
|
|
{
|
|
struct dvb_usb_adapter *adap = fe->dvb->priv;
|
|
struct dib0700_adapter_state *state = adap->priv;
|
|
|
|
u16 offset;
|
|
u8 band = BAND_OF_FREQUENCY(fep->frequency/1000);
|
|
switch (band) {
|
|
case BAND_VHF: offset = 950; break;
|
|
case BAND_UHF:
|
|
default: offset = 550; break;
|
|
}
|
|
deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe));
|
|
dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
|
|
return state->set_param_save(fe, fep);
|
|
}
|
|
|
|
static int dib7770_set_param_override(struct dvb_frontend *fe,
|
|
struct dvb_frontend_parameters *fep)
|
|
{
|
|
struct dvb_usb_adapter *adap = fe->dvb->priv;
|
|
struct dib0700_adapter_state *state = adap->priv;
|
|
|
|
u16 offset;
|
|
u8 band = BAND_OF_FREQUENCY(fep->frequency/1000);
|
|
switch (band) {
|
|
case BAND_VHF:
|
|
dib7000p_set_gpio(fe, 0, 0, 1);
|
|
offset = 850;
|
|
break;
|
|
case BAND_UHF:
|
|
default:
|
|
dib7000p_set_gpio(fe, 0, 0, 0);
|
|
offset = 250;
|
|
break;
|
|
}
|
|
deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe));
|
|
dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
|
|
return state->set_param_save(fe, fep);
|
|
}
|
|
|
|
static int dib7770p_tuner_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
struct dib0700_adapter_state *st = adap->priv;
|
|
struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe,
|
|
DIBX000_I2C_INTERFACE_TUNER, 1);
|
|
|
|
if (dvb_attach(dib0070_attach, adap->fe, tun_i2c,
|
|
&dib7770p_dib0070_config) == NULL)
|
|
return -ENODEV;
|
|
|
|
st->set_param_save = adap->fe->ops.tuner_ops.set_params;
|
|
adap->fe->ops.tuner_ops.set_params = dib7770_set_param_override;
|
|
return 0;
|
|
}
|
|
|
|
static int dib7070p_tuner_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
struct dib0700_adapter_state *st = adap->priv;
|
|
struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
|
|
|
|
if (adap->id == 0) {
|
|
if (dvb_attach(dib0070_attach, adap->fe, tun_i2c, &dib7070p_dib0070_config[0]) == NULL)
|
|
return -ENODEV;
|
|
} else {
|
|
if (dvb_attach(dib0070_attach, adap->fe, tun_i2c, &dib7070p_dib0070_config[1]) == NULL)
|
|
return -ENODEV;
|
|
}
|
|
|
|
st->set_param_save = adap->fe->ops.tuner_ops.set_params;
|
|
adap->fe->ops.tuner_ops.set_params = dib7070_set_param_override;
|
|
return 0;
|
|
}
|
|
|
|
static int stk70x0p_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff)
|
|
{
|
|
return dib7000p_pid_filter(adapter->fe, index, pid, onoff);
|
|
}
|
|
|
|
static int stk70x0p_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
|
|
{
|
|
return dib7000p_pid_filter_ctrl(adapter->fe, onoff);
|
|
}
|
|
|
|
static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = {
|
|
60000, 15000,
|
|
1, 20, 3, 1, 0,
|
|
0, 0, 1, 1, 2,
|
|
(3 << 14) | (1 << 12) | (524 << 0),
|
|
(0 << 25) | 0,
|
|
20452225,
|
|
12000000,
|
|
};
|
|
|
|
static struct dib7000p_config dib7070p_dib7000p_config = {
|
|
.output_mpeg2_in_188_bytes = 1,
|
|
|
|
.agc_config_count = 1,
|
|
.agc = &dib7070_agc_config,
|
|
.bw = &dib7070_bw_config_12_mhz,
|
|
.tuner_is_baseband = 1,
|
|
.spur_protect = 1,
|
|
|
|
.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
|
|
.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
|
|
.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
|
|
|
|
.hostbus_diversity = 1,
|
|
};
|
|
|
|
/* STK7070P */
|
|
static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
struct usb_device_descriptor *p = &adap->dev->udev->descriptor;
|
|
if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) &&
|
|
p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E))
|
|
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
|
|
else
|
|
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
|
|
msleep(10);
|
|
dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
|
|
dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
|
|
dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
|
|
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
|
|
|
|
dib0700_ctrl_clock(adap->dev, 72, 1);
|
|
|
|
msleep(10);
|
|
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
|
|
msleep(10);
|
|
dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
|
|
|
|
if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
|
|
&dib7070p_dib7000p_config) != 0) {
|
|
err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n",
|
|
__func__);
|
|
return -ENODEV;
|
|
}
|
|
|
|
adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
|
|
&dib7070p_dib7000p_config);
|
|
return adap->fe == NULL ? -ENODEV : 0;
|
|
}
|
|
|
|
/* DIB807x generic */
|
|
static struct dibx000_agc_config dib807x_agc_config[2] = {
|
|
{
|
|
BAND_VHF,
|
|
/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
|
|
* P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
|
|
* P_agc_inv_pwm2=0,P_agc_inh_dc_rv_est=0,
|
|
* P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
|
|
* P_agc_write=0 */
|
|
(0 << 15) | (0 << 14) | (7 << 11) | (0 << 10) | (0 << 9) |
|
|
(0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) |
|
|
(0 << 0), /* setup*/
|
|
|
|
600, /* inv_gain*/
|
|
10, /* time_stabiliz*/
|
|
|
|
0, /* alpha_level*/
|
|
118, /* thlock*/
|
|
|
|
0, /* wbd_inv*/
|
|
3530, /* wbd_ref*/
|
|
1, /* wbd_sel*/
|
|
5, /* wbd_alpha*/
|
|
|
|
65535, /* agc1_max*/
|
|
0, /* agc1_min*/
|
|
|
|
65535, /* agc2_max*/
|
|
0, /* agc2_min*/
|
|
|
|
0, /* agc1_pt1*/
|
|
40, /* agc1_pt2*/
|
|
183, /* agc1_pt3*/
|
|
206, /* agc1_slope1*/
|
|
255, /* agc1_slope2*/
|
|
72, /* agc2_pt1*/
|
|
152, /* agc2_pt2*/
|
|
88, /* agc2_slope1*/
|
|
90, /* agc2_slope2*/
|
|
|
|
17, /* alpha_mant*/
|
|
27, /* alpha_exp*/
|
|
23, /* beta_mant*/
|
|
51, /* beta_exp*/
|
|
|
|
0, /* perform_agc_softsplit*/
|
|
}, {
|
|
BAND_UHF,
|
|
/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
|
|
* P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
|
|
* P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
|
|
* P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
|
|
* P_agc_write=0 */
|
|
(0 << 15) | (0 << 14) | (1 << 11) | (0 << 10) | (0 << 9) |
|
|
(0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) |
|
|
(0 << 0), /* setup */
|
|
|
|
600, /* inv_gain*/
|
|
10, /* time_stabiliz*/
|
|
|
|
0, /* alpha_level*/
|
|
118, /* thlock*/
|
|
|
|
0, /* wbd_inv*/
|
|
3530, /* wbd_ref*/
|
|
1, /* wbd_sel*/
|
|
5, /* wbd_alpha*/
|
|
|
|
65535, /* agc1_max*/
|
|
0, /* agc1_min*/
|
|
|
|
65535, /* agc2_max*/
|
|
0, /* agc2_min*/
|
|
|
|
0, /* agc1_pt1*/
|
|
40, /* agc1_pt2*/
|
|
183, /* agc1_pt3*/
|
|
206, /* agc1_slope1*/
|
|
255, /* agc1_slope2*/
|
|
72, /* agc2_pt1*/
|
|
152, /* agc2_pt2*/
|
|
88, /* agc2_slope1*/
|
|
90, /* agc2_slope2*/
|
|
|
|
17, /* alpha_mant*/
|
|
27, /* alpha_exp*/
|
|
23, /* beta_mant*/
|
|
51, /* beta_exp*/
|
|
|
|
0, /* perform_agc_softsplit*/
|
|
}
|
|
};
|
|
|
|
static struct dibx000_bandwidth_config dib807x_bw_config_12_mhz = {
|
|
60000, 15000, /* internal, sampling*/
|
|
1, 20, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass*/
|
|
0, 0, 1, 1, 2, /* misc: refdiv, bypclk_div, IO_CLK_en_core,
|
|
ADClkSrc, modulo */
|
|
(3 << 14) | (1 << 12) | (599 << 0), /* sad_cfg: refsel, sel, freq_15k*/
|
|
(0 << 25) | 0, /* ifreq = 0.000000 MHz*/
|
|
18179755, /* timf*/
|
|
12000000, /* xtal_hz*/
|
|
};
|
|
|
|
static struct dib8000_config dib807x_dib8000_config[2] = {
|
|
{
|
|
.output_mpeg2_in_188_bytes = 1,
|
|
|
|
.agc_config_count = 2,
|
|
.agc = dib807x_agc_config,
|
|
.pll = &dib807x_bw_config_12_mhz,
|
|
.tuner_is_baseband = 1,
|
|
|
|
.gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
|
|
.gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
|
|
.gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
|
|
|
|
.hostbus_diversity = 1,
|
|
.div_cfg = 1,
|
|
.agc_control = &dib0070_ctrl_agc_filter,
|
|
.output_mode = OUTMODE_MPEG2_FIFO,
|
|
.drives = 0x2d98,
|
|
}, {
|
|
.output_mpeg2_in_188_bytes = 1,
|
|
|
|
.agc_config_count = 2,
|
|
.agc = dib807x_agc_config,
|
|
.pll = &dib807x_bw_config_12_mhz,
|
|
.tuner_is_baseband = 1,
|
|
|
|
.gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
|
|
.gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
|
|
.gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
|
|
|
|
.hostbus_diversity = 1,
|
|
.agc_control = &dib0070_ctrl_agc_filter,
|
|
.output_mode = OUTMODE_MPEG2_FIFO,
|
|
.drives = 0x2d98,
|
|
}
|
|
};
|
|
|
|
static int dib80xx_tuner_reset(struct dvb_frontend *fe, int onoff)
|
|
{
|
|
return dib8000_set_gpio(fe, 5, 0, !onoff);
|
|
}
|
|
|
|
static int dib80xx_tuner_sleep(struct dvb_frontend *fe, int onoff)
|
|
{
|
|
return dib8000_set_gpio(fe, 0, 0, onoff);
|
|
}
|
|
|
|
static const struct dib0070_wbd_gain_cfg dib8070_wbd_gain_cfg[] = {
|
|
{ 240, 7},
|
|
{ 0xffff, 6},
|
|
};
|
|
|
|
static struct dib0070_config dib807x_dib0070_config[2] = {
|
|
{
|
|
.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
|
|
.reset = dib80xx_tuner_reset,
|
|
.sleep = dib80xx_tuner_sleep,
|
|
.clock_khz = 12000,
|
|
.clock_pad_drive = 4,
|
|
.vga_filter = 1,
|
|
.force_crystal_mode = 1,
|
|
.enable_third_order_filter = 1,
|
|
.charge_pump = 0,
|
|
.wbd_gain = dib8070_wbd_gain_cfg,
|
|
.osc_buffer_state = 0,
|
|
.freq_offset_khz_uhf = -100,
|
|
.freq_offset_khz_vhf = -100,
|
|
}, {
|
|
.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
|
|
.reset = dib80xx_tuner_reset,
|
|
.sleep = dib80xx_tuner_sleep,
|
|
.clock_khz = 12000,
|
|
.clock_pad_drive = 2,
|
|
.vga_filter = 1,
|
|
.force_crystal_mode = 1,
|
|
.enable_third_order_filter = 1,
|
|
.charge_pump = 0,
|
|
.wbd_gain = dib8070_wbd_gain_cfg,
|
|
.osc_buffer_state = 0,
|
|
.freq_offset_khz_uhf = -25,
|
|
.freq_offset_khz_vhf = -25,
|
|
}
|
|
};
|
|
|
|
static int dib807x_set_param_override(struct dvb_frontend *fe,
|
|
struct dvb_frontend_parameters *fep)
|
|
{
|
|
struct dvb_usb_adapter *adap = fe->dvb->priv;
|
|
struct dib0700_adapter_state *state = adap->priv;
|
|
|
|
u16 offset = dib0070_wbd_offset(fe);
|
|
u8 band = BAND_OF_FREQUENCY(fep->frequency/1000);
|
|
switch (band) {
|
|
case BAND_VHF:
|
|
offset += 750;
|
|
break;
|
|
case BAND_UHF: /* fall-thru wanted */
|
|
default:
|
|
offset += 250; break;
|
|
}
|
|
deb_info("WBD for DiB8000: %d\n", offset);
|
|
dib8000_set_wbd_ref(fe, offset);
|
|
|
|
return state->set_param_save(fe, fep);
|
|
}
|
|
|
|
static int dib807x_tuner_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
struct dib0700_adapter_state *st = adap->priv;
|
|
struct i2c_adapter *tun_i2c = dib8000_get_i2c_master(adap->fe,
|
|
DIBX000_I2C_INTERFACE_TUNER, 1);
|
|
|
|
if (adap->id == 0) {
|
|
if (dvb_attach(dib0070_attach, adap->fe, tun_i2c,
|
|
&dib807x_dib0070_config[0]) == NULL)
|
|
return -ENODEV;
|
|
} else {
|
|
if (dvb_attach(dib0070_attach, adap->fe, tun_i2c,
|
|
&dib807x_dib0070_config[1]) == NULL)
|
|
return -ENODEV;
|
|
}
|
|
|
|
st->set_param_save = adap->fe->ops.tuner_ops.set_params;
|
|
adap->fe->ops.tuner_ops.set_params = dib807x_set_param_override;
|
|
return 0;
|
|
}
|
|
|
|
static int stk80xx_pid_filter(struct dvb_usb_adapter *adapter, int index,
|
|
u16 pid, int onoff)
|
|
{
|
|
return dib8000_pid_filter(adapter->fe, index, pid, onoff);
|
|
}
|
|
|
|
static int stk80xx_pid_filter_ctrl(struct dvb_usb_adapter *adapter,
|
|
int onoff)
|
|
{
|
|
return dib8000_pid_filter_ctrl(adapter->fe, onoff);
|
|
}
|
|
|
|
/* STK807x */
|
|
static int stk807x_frontend_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
|
|
msleep(10);
|
|
dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
|
|
dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
|
|
dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
|
|
|
|
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
|
|
|
|
dib0700_ctrl_clock(adap->dev, 72, 1);
|
|
|
|
msleep(10);
|
|
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
|
|
msleep(10);
|
|
dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
|
|
|
|
dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
|
|
0x80);
|
|
|
|
adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80,
|
|
&dib807x_dib8000_config[0]);
|
|
|
|
return adap->fe == NULL ? -ENODEV : 0;
|
|
}
|
|
|
|
/* STK807xPVR */
|
|
static int stk807xpvr_frontend_attach0(struct dvb_usb_adapter *adap)
|
|
{
|
|
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
|
|
msleep(30);
|
|
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
|
|
msleep(500);
|
|
dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
|
|
dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
|
|
dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
|
|
|
|
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
|
|
|
|
dib0700_ctrl_clock(adap->dev, 72, 1);
|
|
|
|
msleep(10);
|
|
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
|
|
msleep(10);
|
|
dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
|
|
|
|
/* initialize IC 0 */
|
|
dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x22, 0x80);
|
|
|
|
adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80,
|
|
&dib807x_dib8000_config[0]);
|
|
|
|
return adap->fe == NULL ? -ENODEV : 0;
|
|
}
|
|
|
|
static int stk807xpvr_frontend_attach1(struct dvb_usb_adapter *adap)
|
|
{
|
|
/* initialize IC 1 */
|
|
dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x12, 0x82);
|
|
|
|
adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x82,
|
|
&dib807x_dib8000_config[1]);
|
|
|
|
return adap->fe == NULL ? -ENODEV : 0;
|
|
}
|
|
|
|
/* STK8096GP */
|
|
struct dibx000_agc_config dib8090_agc_config[2] = {
|
|
{
|
|
BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
|
|
/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1,
|
|
* P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
|
|
* P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
|
|
(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
|
|
| (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
|
|
|
|
787,
|
|
10,
|
|
|
|
0,
|
|
118,
|
|
|
|
0,
|
|
3530,
|
|
1,
|
|
5,
|
|
|
|
65535,
|
|
0,
|
|
|
|
65535,
|
|
0,
|
|
|
|
0,
|
|
32,
|
|
114,
|
|
143,
|
|
144,
|
|
114,
|
|
227,
|
|
116,
|
|
117,
|
|
|
|
28,
|
|
26,
|
|
31,
|
|
51,
|
|
|
|
0,
|
|
},
|
|
{
|
|
BAND_CBAND,
|
|
/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1,
|
|
* P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
|
|
* P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
|
|
(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
|
|
| (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
|
|
|
|
787,
|
|
10,
|
|
|
|
0,
|
|
118,
|
|
|
|
0,
|
|
3530,
|
|
1,
|
|
5,
|
|
|
|
0,
|
|
0,
|
|
|
|
65535,
|
|
0,
|
|
|
|
0,
|
|
32,
|
|
114,
|
|
143,
|
|
144,
|
|
114,
|
|
227,
|
|
116,
|
|
117,
|
|
|
|
28,
|
|
26,
|
|
31,
|
|
51,
|
|
|
|
0,
|
|
}
|
|
};
|
|
|
|
static struct dibx000_bandwidth_config dib8090_pll_config_12mhz = {
|
|
54000, 13500,
|
|
1, 18, 3, 1, 0,
|
|
0, 0, 1, 1, 2,
|
|
(3 << 14) | (1 << 12) | (599 << 0),
|
|
(0 << 25) | 0,
|
|
20199727,
|
|
12000000,
|
|
};
|
|
|
|
static int dib8090_get_adc_power(struct dvb_frontend *fe)
|
|
{
|
|
return dib8000_get_adc_power(fe, 1);
|
|
}
|
|
|
|
static struct dib8000_config dib809x_dib8000_config = {
|
|
.output_mpeg2_in_188_bytes = 1,
|
|
|
|
.agc_config_count = 2,
|
|
.agc = dib8090_agc_config,
|
|
.agc_control = dib0090_dcc_freq,
|
|
.pll = &dib8090_pll_config_12mhz,
|
|
.tuner_is_baseband = 1,
|
|
|
|
.gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
|
|
.gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
|
|
.gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
|
|
|
|
.hostbus_diversity = 1,
|
|
.div_cfg = 0x31,
|
|
.output_mode = OUTMODE_MPEG2_FIFO,
|
|
.drives = 0x2d98,
|
|
.diversity_delay = 144,
|
|
.refclksel = 3,
|
|
};
|
|
|
|
static struct dib0090_config dib809x_dib0090_config = {
|
|
.io.pll_bypass = 1,
|
|
.io.pll_range = 1,
|
|
.io.pll_prediv = 1,
|
|
.io.pll_loopdiv = 20,
|
|
.io.adc_clock_ratio = 8,
|
|
.io.pll_int_loop_filt = 0,
|
|
.io.clock_khz = 12000,
|
|
.reset = dib80xx_tuner_reset,
|
|
.sleep = dib80xx_tuner_sleep,
|
|
.clkouttobamse = 1,
|
|
.analog_output = 1,
|
|
.i2c_address = DEFAULT_DIB0090_I2C_ADDRESS,
|
|
.wbd_vhf_offset = 100,
|
|
.wbd_cband_offset = 450,
|
|
.use_pwm_agc = 1,
|
|
.clkoutdrive = 1,
|
|
.get_adc_power = dib8090_get_adc_power,
|
|
.freq_offset_khz_uhf = 0,
|
|
.freq_offset_khz_vhf = -143,
|
|
};
|
|
|
|
static int dib8096_set_param_override(struct dvb_frontend *fe,
|
|
struct dvb_frontend_parameters *fep)
|
|
{
|
|
struct dvb_usb_adapter *adap = fe->dvb->priv;
|
|
struct dib0700_adapter_state *state = adap->priv;
|
|
u8 band = BAND_OF_FREQUENCY(fep->frequency/1000);
|
|
u16 offset;
|
|
int ret = 0;
|
|
enum frontend_tune_state tune_state = CT_SHUTDOWN;
|
|
u16 ltgain, rf_gain_limit;
|
|
|
|
ret = state->set_param_save(fe, fep);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
switch (band) {
|
|
case BAND_VHF:
|
|
offset = 100;
|
|
break;
|
|
case BAND_UHF:
|
|
offset = 550;
|
|
break;
|
|
default:
|
|
offset = 0;
|
|
break;
|
|
}
|
|
offset += (dib0090_get_wbd_offset(fe) * 8 * 18 / 33 + 1) / 2;
|
|
dib8000_set_wbd_ref(fe, offset);
|
|
|
|
|
|
if (band == BAND_CBAND) {
|
|
deb_info("tuning in CBAND - soft-AGC startup\n");
|
|
/* TODO specific wbd target for dib0090 - needed for startup ? */
|
|
dib0090_set_tune_state(fe, CT_AGC_START);
|
|
do {
|
|
ret = dib0090_gain_control(fe);
|
|
msleep(ret);
|
|
tune_state = dib0090_get_tune_state(fe);
|
|
if (tune_state == CT_AGC_STEP_0)
|
|
dib8000_set_gpio(fe, 6, 0, 1);
|
|
else if (tune_state == CT_AGC_STEP_1) {
|
|
dib0090_get_current_gain(fe, NULL, NULL, &rf_gain_limit, <gain);
|
|
if (rf_gain_limit == 0)
|
|
dib8000_set_gpio(fe, 6, 0, 0);
|
|
}
|
|
} while (tune_state < CT_AGC_STOP);
|
|
dib0090_pwm_gain_reset(fe);
|
|
dib8000_pwm_agc_reset(fe);
|
|
dib8000_set_tune_state(fe, CT_DEMOD_START);
|
|
} else {
|
|
deb_info("not tuning in CBAND - standard AGC startup\n");
|
|
dib0090_pwm_gain_reset(fe);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dib809x_tuner_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
struct dib0700_adapter_state *st = adap->priv;
|
|
struct i2c_adapter *tun_i2c = dib8000_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
|
|
|
|
if (dvb_attach(dib0090_register, adap->fe, tun_i2c, &dib809x_dib0090_config) == NULL)
|
|
return -ENODEV;
|
|
|
|
st->set_param_save = adap->fe->ops.tuner_ops.set_params;
|
|
adap->fe->ops.tuner_ops.set_params = dib8096_set_param_override;
|
|
return 0;
|
|
}
|
|
|
|
static int stk809x_frontend_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
|
|
msleep(10);
|
|
dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
|
|
dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
|
|
dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
|
|
|
|
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
|
|
|
|
dib0700_ctrl_clock(adap->dev, 72, 1);
|
|
|
|
msleep(10);
|
|
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
|
|
msleep(10);
|
|
dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
|
|
|
|
dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, 0x80);
|
|
|
|
adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config);
|
|
|
|
return adap->fe == NULL ? -ENODEV : 0;
|
|
}
|
|
|
|
/* STK7070PD */
|
|
static struct dib7000p_config stk7070pd_dib7000p_config[2] = {
|
|
{
|
|
.output_mpeg2_in_188_bytes = 1,
|
|
|
|
.agc_config_count = 1,
|
|
.agc = &dib7070_agc_config,
|
|
.bw = &dib7070_bw_config_12_mhz,
|
|
.tuner_is_baseband = 1,
|
|
.spur_protect = 1,
|
|
|
|
.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
|
|
.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
|
|
.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
|
|
|
|
.hostbus_diversity = 1,
|
|
}, {
|
|
.output_mpeg2_in_188_bytes = 1,
|
|
|
|
.agc_config_count = 1,
|
|
.agc = &dib7070_agc_config,
|
|
.bw = &dib7070_bw_config_12_mhz,
|
|
.tuner_is_baseband = 1,
|
|
.spur_protect = 1,
|
|
|
|
.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
|
|
.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
|
|
.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
|
|
|
|
.hostbus_diversity = 1,
|
|
}
|
|
};
|
|
|
|
static int stk7070pd_frontend_attach0(struct dvb_usb_adapter *adap)
|
|
{
|
|
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
|
|
msleep(10);
|
|
dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
|
|
dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
|
|
dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
|
|
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
|
|
|
|
dib0700_ctrl_clock(adap->dev, 72, 1);
|
|
|
|
msleep(10);
|
|
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
|
|
msleep(10);
|
|
dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
|
|
|
|
if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 2, 18,
|
|
stk7070pd_dib7000p_config) != 0) {
|
|
err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n",
|
|
__func__);
|
|
return -ENODEV;
|
|
}
|
|
|
|
adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, &stk7070pd_dib7000p_config[0]);
|
|
return adap->fe == NULL ? -ENODEV : 0;
|
|
}
|
|
|
|
static int stk7070pd_frontend_attach1(struct dvb_usb_adapter *adap)
|
|
{
|
|
adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x82, &stk7070pd_dib7000p_config[1]);
|
|
return adap->fe == NULL ? -ENODEV : 0;
|
|
}
|
|
|
|
/* S5H1411 */
|
|
static struct s5h1411_config pinnacle_801e_config = {
|
|
.output_mode = S5H1411_PARALLEL_OUTPUT,
|
|
.gpio = S5H1411_GPIO_OFF,
|
|
.mpeg_timing = S5H1411_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK,
|
|
.qam_if = S5H1411_IF_44000,
|
|
.vsb_if = S5H1411_IF_44000,
|
|
.inversion = S5H1411_INVERSION_OFF,
|
|
.status_mode = S5H1411_DEMODLOCKING
|
|
};
|
|
|
|
/* Pinnacle PCTV HD Pro 801e GPIOs map:
|
|
GPIO0 - currently unknown
|
|
GPIO1 - xc5000 tuner reset
|
|
GPIO2 - CX25843 sleep
|
|
GPIO3 - currently unknown
|
|
GPIO4 - currently unknown
|
|
GPIO6 - currently unknown
|
|
GPIO7 - currently unknown
|
|
GPIO9 - currently unknown
|
|
GPIO10 - CX25843 reset
|
|
*/
|
|
static int s5h1411_frontend_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
struct dib0700_state *st = adap->dev->priv;
|
|
|
|
/* Make use of the new i2c functions from FW 1.20 */
|
|
st->fw_use_new_i2c_api = 1;
|
|
|
|
/* The s5h1411 requires the dib0700 to not be in master mode */
|
|
st->disable_streaming_master_mode = 1;
|
|
|
|
/* All msleep values taken from Windows USB trace */
|
|
dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0);
|
|
dib0700_set_gpio(adap->dev, GPIO3, GPIO_OUT, 0);
|
|
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
|
|
msleep(400);
|
|
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
|
|
msleep(60);
|
|
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
|
|
msleep(30);
|
|
dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
|
|
dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
|
|
dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
|
|
dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
|
|
dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 0);
|
|
msleep(30);
|
|
|
|
/* Put the CX25843 to sleep for now since we're in digital mode */
|
|
dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1);
|
|
|
|
/* GPIOs are initialized, do the attach */
|
|
adap->fe = dvb_attach(s5h1411_attach, &pinnacle_801e_config,
|
|
&adap->dev->i2c_adap);
|
|
return adap->fe == NULL ? -ENODEV : 0;
|
|
}
|
|
|
|
static int dib0700_xc5000_tuner_callback(void *priv, int component,
|
|
int command, int arg)
|
|
{
|
|
struct dvb_usb_adapter *adap = priv;
|
|
|
|
if (command == XC5000_TUNER_RESET) {
|
|
/* Reset the tuner */
|
|
dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 0);
|
|
msleep(10);
|
|
dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 1);
|
|
msleep(10);
|
|
} else {
|
|
err("xc5000: unknown tuner callback command: %d\n", command);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct xc5000_config s5h1411_xc5000_tunerconfig = {
|
|
.i2c_address = 0x64,
|
|
.if_khz = 5380,
|
|
};
|
|
|
|
static int xc5000_tuner_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
/* FIXME: generalize & move to common area */
|
|
adap->fe->callback = dib0700_xc5000_tuner_callback;
|
|
|
|
return dvb_attach(xc5000_attach, adap->fe, &adap->dev->i2c_adap,
|
|
&s5h1411_xc5000_tunerconfig)
|
|
== NULL ? -ENODEV : 0;
|
|
}
|
|
|
|
static struct lgdt3305_config hcw_lgdt3305_config = {
|
|
.i2c_addr = 0x0e,
|
|
.mpeg_mode = LGDT3305_MPEG_PARALLEL,
|
|
.tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE,
|
|
.tpvalid_polarity = LGDT3305_TP_VALID_LOW,
|
|
.deny_i2c_rptr = 0,
|
|
.spectral_inversion = 1,
|
|
.qam_if_khz = 6000,
|
|
.vsb_if_khz = 6000,
|
|
.usref_8vsb = 0x0500,
|
|
};
|
|
|
|
static struct mxl5007t_config hcw_mxl5007t_config = {
|
|
.xtal_freq_hz = MxL_XTAL_25_MHZ,
|
|
.if_freq_hz = MxL_IF_6_MHZ,
|
|
.invert_if = 1,
|
|
};
|
|
|
|
/* TIGER-ATSC map:
|
|
GPIO0 - LNA_CTR (H: LNA power enabled, L: LNA power disabled)
|
|
GPIO1 - ANT_SEL (H: VPA, L: MCX)
|
|
GPIO4 - SCL2
|
|
GPIO6 - EN_TUNER
|
|
GPIO7 - SDA2
|
|
GPIO10 - DEM_RST
|
|
|
|
MXL is behind LG's i2c repeater. LG is on SCL2/SDA2 gpios on the DIB
|
|
*/
|
|
static int lgdt3305_frontend_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
struct dib0700_state *st = adap->dev->priv;
|
|
|
|
/* Make use of the new i2c functions from FW 1.20 */
|
|
st->fw_use_new_i2c_api = 1;
|
|
|
|
st->disable_streaming_master_mode = 1;
|
|
|
|
/* fe power enable */
|
|
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
|
|
msleep(30);
|
|
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
|
|
msleep(30);
|
|
|
|
/* demod reset */
|
|
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
|
|
msleep(30);
|
|
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
|
|
msleep(30);
|
|
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
|
|
msleep(30);
|
|
|
|
adap->fe = dvb_attach(lgdt3305_attach,
|
|
&hcw_lgdt3305_config,
|
|
&adap->dev->i2c_adap);
|
|
|
|
return adap->fe == NULL ? -ENODEV : 0;
|
|
}
|
|
|
|
static int mxl5007t_tuner_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
return dvb_attach(mxl5007t_attach, adap->fe,
|
|
&adap->dev->i2c_adap, 0x60,
|
|
&hcw_mxl5007t_config) == NULL ? -ENODEV : 0;
|
|
}
|
|
|
|
|
|
/* DVB-USB and USB stuff follows */
|
|
struct usb_device_id dib0700_usb_id_table[] = {
|
|
/* 0 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P) },
|
|
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P_PC) },
|
|
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500) },
|
|
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_2) },
|
|
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK) },
|
|
/* 5 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR) },
|
|
{ USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500) },
|
|
{ USB_DEVICE(USB_VID_UNIWILL, USB_PID_UNIWILL_STK7700P) },
|
|
{ USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P) },
|
|
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_2) },
|
|
/* 10 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_2) },
|
|
{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV2000E) },
|
|
{ USB_DEVICE(USB_VID_TERRATEC,
|
|
USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY) },
|
|
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK) },
|
|
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700D) },
|
|
/* 15 */{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7070P) },
|
|
{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV_DVB_T_FLASH) },
|
|
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7070PD) },
|
|
{ USB_DEVICE(USB_VID_PINNACLE,
|
|
USB_PID_PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T) },
|
|
{ USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500_PC) },
|
|
/* 20 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_EXPRESS) },
|
|
{ USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U7000) },
|
|
{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ARTEC_T14BR) },
|
|
{ USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000) },
|
|
{ USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3100) },
|
|
/* 25 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_3) },
|
|
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_MYTV_T) },
|
|
{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_USB_XE) },
|
|
{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_EXPRESSCARD_320CX) },
|
|
{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV72E) },
|
|
/* 30 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73E) },
|
|
{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_EC372S) },
|
|
{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_EXPRESS) },
|
|
{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS) },
|
|
{ USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P_2) },
|
|
/* 35 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) },
|
|
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_3) },
|
|
{ USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U8000) },
|
|
{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700PH) },
|
|
{ USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000H) },
|
|
/* 40 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E) },
|
|
{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E_SE) },
|
|
{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_EXPRESS) },
|
|
{ USB_DEVICE(USB_VID_TERRATEC,
|
|
USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2) },
|
|
{ USB_DEVICE(USB_VID_SONY, USB_PID_SONY_PLAYTV) },
|
|
/* 45 */{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_PD378S) },
|
|
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_TIGER_ATSC) },
|
|
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_TIGER_ATSC_B210) },
|
|
{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_MC770) },
|
|
{ USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT) },
|
|
/* 50 */{ USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT_Dlx) },
|
|
{ USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_H) },
|
|
{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_T3) },
|
|
{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_T5) },
|
|
{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700D) },
|
|
/* 55 */{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700D_2) },
|
|
{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73A) },
|
|
{ USB_DEVICE(USB_VID_PCTV, USB_PID_PINNACLE_PCTV73ESE) },
|
|
{ USB_DEVICE(USB_VID_PCTV, USB_PID_PINNACLE_PCTV282E) },
|
|
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7770P) },
|
|
/* 60 */{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS_2) },
|
|
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XPVR) },
|
|
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XP) },
|
|
{ USB_DEVICE(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD) },
|
|
{ USB_DEVICE(USB_VID_EVOLUTEPC, USB_PID_TVWAY_PLUS) },
|
|
/* 65 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73ESE) },
|
|
{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV282E) },
|
|
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK8096GP) },
|
|
{ 0 } /* Terminating entry */
|
|
};
|
|
MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
|
|
|
|
#define DIB0700_DEFAULT_DEVICE_PROPERTIES \
|
|
.caps = DVB_USB_IS_AN_I2C_ADAPTER, \
|
|
.usb_ctrl = DEVICE_SPECIFIC, \
|
|
.firmware = "dvb-usb-dib0700-1.20.fw", \
|
|
.download_firmware = dib0700_download_firmware, \
|
|
.no_reconnect = 1, \
|
|
.size_of_priv = sizeof(struct dib0700_state), \
|
|
.i2c_algo = &dib0700_i2c_algo, \
|
|
.identify_state = dib0700_identify_state
|
|
|
|
#define DIB0700_DEFAULT_STREAMING_CONFIG(ep) \
|
|
.streaming_ctrl = dib0700_streaming_ctrl, \
|
|
.stream = { \
|
|
.type = USB_BULK, \
|
|
.count = 4, \
|
|
.endpoint = ep, \
|
|
.u = { \
|
|
.bulk = { \
|
|
.buffersize = 39480, \
|
|
} \
|
|
} \
|
|
}
|
|
|
|
struct dvb_usb_device_properties dib0700_devices[] = {
|
|
{
|
|
DIB0700_DEFAULT_DEVICE_PROPERTIES,
|
|
|
|
.num_adapters = 1,
|
|
.adapter = {
|
|
{
|
|
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
|
|
.pid_filter_count = 32,
|
|
.pid_filter = stk70x0p_pid_filter,
|
|
.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
|
|
.frontend_attach = stk7700p_frontend_attach,
|
|
.tuner_attach = stk7700p_tuner_attach,
|
|
|
|
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
|
|
},
|
|
},
|
|
|
|
.num_device_descs = 8,
|
|
.devices = {
|
|
{ "DiBcom STK7700P reference design",
|
|
{ &dib0700_usb_id_table[0], &dib0700_usb_id_table[1] },
|
|
{ NULL },
|
|
},
|
|
{ "Hauppauge Nova-T Stick",
|
|
{ &dib0700_usb_id_table[4], &dib0700_usb_id_table[9], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "AVerMedia AVerTV DVB-T Volar",
|
|
{ &dib0700_usb_id_table[5], &dib0700_usb_id_table[10] },
|
|
{ NULL },
|
|
},
|
|
{ "Compro Videomate U500",
|
|
{ &dib0700_usb_id_table[6], &dib0700_usb_id_table[19] },
|
|
{ NULL },
|
|
},
|
|
{ "Uniwill STK7700P based (Hama and others)",
|
|
{ &dib0700_usb_id_table[7], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "Leadtek Winfast DTV Dongle (STK7700P based)",
|
|
{ &dib0700_usb_id_table[8], &dib0700_usb_id_table[34] },
|
|
{ NULL },
|
|
},
|
|
{ "AVerMedia AVerTV DVB-T Express",
|
|
{ &dib0700_usb_id_table[20] },
|
|
{ NULL },
|
|
},
|
|
{ "Gigabyte U7000",
|
|
{ &dib0700_usb_id_table[21], NULL },
|
|
{ NULL },
|
|
}
|
|
},
|
|
|
|
.rc_interval = DEFAULT_RC_INTERVAL,
|
|
.rc_key_map = dib0700_rc_keys,
|
|
.rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys),
|
|
.rc_query = dib0700_rc_query
|
|
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
|
|
|
|
.num_adapters = 2,
|
|
.adapter = {
|
|
{
|
|
.frontend_attach = bristol_frontend_attach,
|
|
.tuner_attach = bristol_tuner_attach,
|
|
|
|
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
|
|
}, {
|
|
.frontend_attach = bristol_frontend_attach,
|
|
.tuner_attach = bristol_tuner_attach,
|
|
|
|
DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
|
|
}
|
|
},
|
|
|
|
.num_device_descs = 1,
|
|
.devices = {
|
|
{ "Hauppauge Nova-T 500 Dual DVB-T",
|
|
{ &dib0700_usb_id_table[2], &dib0700_usb_id_table[3], NULL },
|
|
{ NULL },
|
|
},
|
|
},
|
|
|
|
.rc_interval = DEFAULT_RC_INTERVAL,
|
|
.rc_key_map = dib0700_rc_keys,
|
|
.rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys),
|
|
.rc_query = dib0700_rc_query
|
|
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
|
|
|
|
.num_adapters = 2,
|
|
.adapter = {
|
|
{
|
|
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
|
|
.pid_filter_count = 32,
|
|
.pid_filter = stk70x0p_pid_filter,
|
|
.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
|
|
.frontend_attach = stk7700d_frontend_attach,
|
|
.tuner_attach = stk7700d_tuner_attach,
|
|
|
|
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
|
|
}, {
|
|
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
|
|
.pid_filter_count = 32,
|
|
.pid_filter = stk70x0p_pid_filter,
|
|
.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
|
|
.frontend_attach = stk7700d_frontend_attach,
|
|
.tuner_attach = stk7700d_tuner_attach,
|
|
|
|
DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
|
|
}
|
|
},
|
|
|
|
.num_device_descs = 5,
|
|
.devices = {
|
|
{ "Pinnacle PCTV 2000e",
|
|
{ &dib0700_usb_id_table[11], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "Terratec Cinergy DT XS Diversity",
|
|
{ &dib0700_usb_id_table[12], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity",
|
|
{ &dib0700_usb_id_table[13], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "DiBcom STK7700D reference design",
|
|
{ &dib0700_usb_id_table[14], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "YUAN High-Tech DiBcom STK7700D",
|
|
{ &dib0700_usb_id_table[55], NULL },
|
|
{ NULL },
|
|
},
|
|
|
|
},
|
|
|
|
.rc_interval = DEFAULT_RC_INTERVAL,
|
|
.rc_key_map = dib0700_rc_keys,
|
|
.rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys),
|
|
.rc_query = dib0700_rc_query
|
|
|
|
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
|
|
|
|
.num_adapters = 1,
|
|
.adapter = {
|
|
{
|
|
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
|
|
.pid_filter_count = 32,
|
|
.pid_filter = stk70x0p_pid_filter,
|
|
.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
|
|
.frontend_attach = stk7700P2_frontend_attach,
|
|
.tuner_attach = stk7700d_tuner_attach,
|
|
|
|
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
|
|
},
|
|
},
|
|
|
|
.num_device_descs = 3,
|
|
.devices = {
|
|
{ "ASUS My Cinema U3000 Mini DVBT Tuner",
|
|
{ &dib0700_usb_id_table[23], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "Yuan EC372S",
|
|
{ &dib0700_usb_id_table[31], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "Terratec Cinergy T Express",
|
|
{ &dib0700_usb_id_table[42], NULL },
|
|
{ NULL },
|
|
}
|
|
},
|
|
|
|
.rc_interval = DEFAULT_RC_INTERVAL,
|
|
.rc_key_map = dib0700_rc_keys,
|
|
.rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys),
|
|
.rc_query = dib0700_rc_query
|
|
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
|
|
|
|
.num_adapters = 1,
|
|
.adapter = {
|
|
{
|
|
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
|
|
.pid_filter_count = 32,
|
|
.pid_filter = stk70x0p_pid_filter,
|
|
.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
|
|
.frontend_attach = stk7070p_frontend_attach,
|
|
.tuner_attach = dib7070p_tuner_attach,
|
|
|
|
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
|
|
|
|
.size_of_priv = sizeof(struct dib0700_adapter_state),
|
|
},
|
|
},
|
|
|
|
.num_device_descs = 11,
|
|
.devices = {
|
|
{ "DiBcom STK7070P reference design",
|
|
{ &dib0700_usb_id_table[15], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "Pinnacle PCTV DVB-T Flash Stick",
|
|
{ &dib0700_usb_id_table[16], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "Artec T14BR DVB-T",
|
|
{ &dib0700_usb_id_table[22], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "ASUS My Cinema U3100 Mini DVBT Tuner",
|
|
{ &dib0700_usb_id_table[24], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "Hauppauge Nova-T Stick",
|
|
{ &dib0700_usb_id_table[25], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "Hauppauge Nova-T MyTV.t",
|
|
{ &dib0700_usb_id_table[26], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "Pinnacle PCTV 72e",
|
|
{ &dib0700_usb_id_table[29], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "Pinnacle PCTV 73e",
|
|
{ &dib0700_usb_id_table[30], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "Elgato EyeTV DTT",
|
|
{ &dib0700_usb_id_table[49], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "Yuan PD378S",
|
|
{ &dib0700_usb_id_table[45], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "Elgato EyeTV Dtt Dlx PD378S",
|
|
{ &dib0700_usb_id_table[50], NULL },
|
|
{ NULL },
|
|
},
|
|
},
|
|
|
|
.rc_interval = DEFAULT_RC_INTERVAL,
|
|
.rc_key_map = dib0700_rc_keys,
|
|
.rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys),
|
|
.rc_query = dib0700_rc_query
|
|
|
|
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
|
|
|
|
.num_adapters = 1,
|
|
.adapter = {
|
|
{
|
|
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
|
|
.pid_filter_count = 32,
|
|
.pid_filter = stk70x0p_pid_filter,
|
|
.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
|
|
.frontend_attach = stk7070p_frontend_attach,
|
|
.tuner_attach = dib7070p_tuner_attach,
|
|
|
|
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
|
|
|
|
.size_of_priv = sizeof(struct dib0700_adapter_state),
|
|
},
|
|
},
|
|
|
|
.num_device_descs = 3,
|
|
.devices = {
|
|
{ "Pinnacle PCTV 73A",
|
|
{ &dib0700_usb_id_table[56], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "Pinnacle PCTV 73e SE",
|
|
{ &dib0700_usb_id_table[57], &dib0700_usb_id_table[65], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "Pinnacle PCTV 282e",
|
|
{ &dib0700_usb_id_table[58], &dib0700_usb_id_table[66], NULL },
|
|
{ NULL },
|
|
},
|
|
},
|
|
|
|
.rc_interval = DEFAULT_RC_INTERVAL,
|
|
.rc_key_map = dib0700_rc_keys,
|
|
.rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys),
|
|
.rc_query = dib0700_rc_query
|
|
|
|
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
|
|
|
|
.num_adapters = 2,
|
|
.adapter = {
|
|
{
|
|
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
|
|
.pid_filter_count = 32,
|
|
.pid_filter = stk70x0p_pid_filter,
|
|
.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
|
|
.frontend_attach = stk7070pd_frontend_attach0,
|
|
.tuner_attach = dib7070p_tuner_attach,
|
|
|
|
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
|
|
|
|
.size_of_priv = sizeof(struct dib0700_adapter_state),
|
|
}, {
|
|
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
|
|
.pid_filter_count = 32,
|
|
.pid_filter = stk70x0p_pid_filter,
|
|
.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
|
|
.frontend_attach = stk7070pd_frontend_attach1,
|
|
.tuner_attach = dib7070p_tuner_attach,
|
|
|
|
DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
|
|
|
|
.size_of_priv = sizeof(struct dib0700_adapter_state),
|
|
}
|
|
},
|
|
|
|
.num_device_descs = 6,
|
|
.devices = {
|
|
{ "DiBcom STK7070PD reference design",
|
|
{ &dib0700_usb_id_table[17], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "Pinnacle PCTV Dual DVB-T Diversity Stick",
|
|
{ &dib0700_usb_id_table[18], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "Hauppauge Nova-TD Stick (52009)",
|
|
{ &dib0700_usb_id_table[35], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "Hauppauge Nova-TD-500 (84xxx)",
|
|
{ &dib0700_usb_id_table[36], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "Terratec Cinergy DT USB XS Diversity/ T5",
|
|
{ &dib0700_usb_id_table[43],
|
|
&dib0700_usb_id_table[53], NULL},
|
|
{ NULL },
|
|
},
|
|
{ "Sony PlayTV",
|
|
{ &dib0700_usb_id_table[44], NULL },
|
|
{ NULL },
|
|
}
|
|
},
|
|
.rc_interval = DEFAULT_RC_INTERVAL,
|
|
.rc_key_map = dib0700_rc_keys,
|
|
.rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys),
|
|
.rc_query = dib0700_rc_query
|
|
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
|
|
|
|
.num_adapters = 1,
|
|
.adapter = {
|
|
{
|
|
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
|
|
.pid_filter_count = 32,
|
|
.pid_filter = stk70x0p_pid_filter,
|
|
.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
|
|
.frontend_attach = stk7700ph_frontend_attach,
|
|
.tuner_attach = stk7700ph_tuner_attach,
|
|
|
|
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
|
|
|
|
.size_of_priv = sizeof(struct
|
|
dib0700_adapter_state),
|
|
},
|
|
},
|
|
|
|
.num_device_descs = 9,
|
|
.devices = {
|
|
{ "Terratec Cinergy HT USB XE",
|
|
{ &dib0700_usb_id_table[27], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "Pinnacle Expresscard 320cx",
|
|
{ &dib0700_usb_id_table[28], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "Terratec Cinergy HT Express",
|
|
{ &dib0700_usb_id_table[32], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "Gigabyte U8000-RH",
|
|
{ &dib0700_usb_id_table[37], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "YUAN High-Tech STK7700PH",
|
|
{ &dib0700_usb_id_table[38], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "Asus My Cinema-U3000Hybrid",
|
|
{ &dib0700_usb_id_table[39], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "YUAN High-Tech MC770",
|
|
{ &dib0700_usb_id_table[48], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "Leadtek WinFast DTV Dongle H",
|
|
{ &dib0700_usb_id_table[51], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "YUAN High-Tech STK7700D",
|
|
{ &dib0700_usb_id_table[54], NULL },
|
|
{ NULL },
|
|
},
|
|
},
|
|
.rc_interval = DEFAULT_RC_INTERVAL,
|
|
.rc_key_map = dib0700_rc_keys,
|
|
.rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys),
|
|
.rc_query = dib0700_rc_query
|
|
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
|
|
.num_adapters = 1,
|
|
.adapter = {
|
|
{
|
|
.frontend_attach = s5h1411_frontend_attach,
|
|
.tuner_attach = xc5000_tuner_attach,
|
|
|
|
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
|
|
|
|
.size_of_priv = sizeof(struct
|
|
dib0700_adapter_state),
|
|
},
|
|
},
|
|
|
|
.num_device_descs = 2,
|
|
.devices = {
|
|
{ "Pinnacle PCTV HD Pro USB Stick",
|
|
{ &dib0700_usb_id_table[40], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "Pinnacle PCTV HD USB Stick",
|
|
{ &dib0700_usb_id_table[41], NULL },
|
|
{ NULL },
|
|
},
|
|
},
|
|
.rc_interval = DEFAULT_RC_INTERVAL,
|
|
.rc_key_map = dib0700_rc_keys,
|
|
.rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys),
|
|
.rc_query = dib0700_rc_query
|
|
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
|
|
.num_adapters = 1,
|
|
.adapter = {
|
|
{
|
|
.frontend_attach = lgdt3305_frontend_attach,
|
|
.tuner_attach = mxl5007t_tuner_attach,
|
|
|
|
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
|
|
|
|
.size_of_priv = sizeof(struct
|
|
dib0700_adapter_state),
|
|
},
|
|
},
|
|
|
|
.num_device_descs = 2,
|
|
.devices = {
|
|
{ "Hauppauge ATSC MiniCard (B200)",
|
|
{ &dib0700_usb_id_table[46], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "Hauppauge ATSC MiniCard (B210)",
|
|
{ &dib0700_usb_id_table[47], NULL },
|
|
{ NULL },
|
|
},
|
|
},
|
|
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
|
|
|
|
.num_adapters = 1,
|
|
.adapter = {
|
|
{
|
|
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
|
|
.pid_filter_count = 32,
|
|
.pid_filter = stk70x0p_pid_filter,
|
|
.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
|
|
.frontend_attach = stk7070p_frontend_attach,
|
|
.tuner_attach = dib7770p_tuner_attach,
|
|
|
|
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
|
|
|
|
.size_of_priv =
|
|
sizeof(struct dib0700_adapter_state),
|
|
},
|
|
},
|
|
|
|
.num_device_descs = 2,
|
|
.devices = {
|
|
{ "DiBcom STK7770P reference design",
|
|
{ &dib0700_usb_id_table[59], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "Terratec Cinergy T USB XXS (HD)/ T3",
|
|
{ &dib0700_usb_id_table[33],
|
|
&dib0700_usb_id_table[52],
|
|
&dib0700_usb_id_table[60], NULL},
|
|
{ NULL },
|
|
},
|
|
},
|
|
.rc_interval = DEFAULT_RC_INTERVAL,
|
|
.rc_key_map = dib0700_rc_keys,
|
|
.rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys),
|
|
.rc_query = dib0700_rc_query
|
|
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
|
|
.num_adapters = 1,
|
|
.adapter = {
|
|
{
|
|
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
|
|
.pid_filter_count = 32,
|
|
.pid_filter = stk80xx_pid_filter,
|
|
.pid_filter_ctrl = stk80xx_pid_filter_ctrl,
|
|
.frontend_attach = stk807x_frontend_attach,
|
|
.tuner_attach = dib807x_tuner_attach,
|
|
|
|
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
|
|
|
|
.size_of_priv =
|
|
sizeof(struct dib0700_adapter_state),
|
|
},
|
|
},
|
|
|
|
.num_device_descs = 3,
|
|
.devices = {
|
|
{ "DiBcom STK807xP reference design",
|
|
{ &dib0700_usb_id_table[62], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "Prolink Pixelview SBTVD",
|
|
{ &dib0700_usb_id_table[63], NULL },
|
|
{ NULL },
|
|
},
|
|
{ "EvolutePC TVWay+",
|
|
{ &dib0700_usb_id_table[64], NULL },
|
|
{ NULL },
|
|
},
|
|
},
|
|
|
|
.rc_interval = DEFAULT_RC_INTERVAL,
|
|
.rc_key_map = dib0700_rc_keys,
|
|
.rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys),
|
|
.rc_query = dib0700_rc_query
|
|
|
|
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
|
|
.num_adapters = 2,
|
|
.adapter = {
|
|
{
|
|
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
|
|
.pid_filter_count = 32,
|
|
.pid_filter = stk80xx_pid_filter,
|
|
.pid_filter_ctrl = stk80xx_pid_filter_ctrl,
|
|
.frontend_attach = stk807xpvr_frontend_attach0,
|
|
.tuner_attach = dib807x_tuner_attach,
|
|
|
|
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
|
|
|
|
.size_of_priv =
|
|
sizeof(struct dib0700_adapter_state),
|
|
},
|
|
{
|
|
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
|
|
.pid_filter_count = 32,
|
|
.pid_filter = stk80xx_pid_filter,
|
|
.pid_filter_ctrl = stk80xx_pid_filter_ctrl,
|
|
.frontend_attach = stk807xpvr_frontend_attach1,
|
|
.tuner_attach = dib807x_tuner_attach,
|
|
|
|
DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
|
|
|
|
.size_of_priv =
|
|
sizeof(struct dib0700_adapter_state),
|
|
},
|
|
},
|
|
|
|
.num_device_descs = 1,
|
|
.devices = {
|
|
{ "DiBcom STK807xPVR reference design",
|
|
{ &dib0700_usb_id_table[61], NULL },
|
|
{ NULL },
|
|
},
|
|
},
|
|
|
|
.rc_interval = DEFAULT_RC_INTERVAL,
|
|
.rc_key_map = dib0700_rc_keys,
|
|
.rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys),
|
|
.rc_query = dib0700_rc_query
|
|
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
|
|
.num_adapters = 1,
|
|
.adapter = {
|
|
{
|
|
.caps = DVB_USB_ADAP_HAS_PID_FILTER |
|
|
DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
|
|
.pid_filter_count = 32,
|
|
.pid_filter = stk80xx_pid_filter,
|
|
.pid_filter_ctrl = stk80xx_pid_filter_ctrl,
|
|
.frontend_attach = stk809x_frontend_attach,
|
|
.tuner_attach = dib809x_tuner_attach,
|
|
|
|
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
|
|
|
|
.size_of_priv =
|
|
sizeof(struct dib0700_adapter_state),
|
|
},
|
|
},
|
|
|
|
.num_device_descs = 1,
|
|
.devices = {
|
|
{ "DiBcom STK8096GP reference design",
|
|
{ &dib0700_usb_id_table[67], NULL },
|
|
{ NULL },
|
|
},
|
|
},
|
|
|
|
.rc_interval = DEFAULT_RC_INTERVAL,
|
|
.rc_key_map = dib0700_rc_keys,
|
|
.rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys),
|
|
.rc_query = dib0700_rc_query
|
|
},
|
|
};
|
|
|
|
int dib0700_device_count = ARRAY_SIZE(dib0700_devices);
|