Wolfgang Muees 48881caec4 mmc_spi: allow setting of spi mode 3 ... Allow the platform data structures to specify spi mode 3 (if there is a pullup on the clock line or the spi hardware is not able to serve spi mode 0). Signed-off-by: Wolfgang Muees <wolfgang.mues@auerswald.de> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>		2009-03-24 21:30:01 +01:00
..
Kconfig	mmc: Add a MX2/MX3 specific SDHC driver	2009-02-02 20:57:05 +01:00
Makefile	mmc: Add a MX2/MX3 specific SDHC driver	2009-02-02 20:57:05 +01:00
at91_mci.c	…
atmel-mci-regs.h	…
atmel-mci.c	mmc: struct device - replace bus_id with dev_name(), dev_set_name()	2009-03-24 21:29:57 +01:00
au1xmmc.c	…
imxmmc.c	…
imxmmc.h	…
mmc_spi.c	mmc_spi: allow setting of spi mode 3	2009-03-24 21:30:01 +01:00
mmci.c	mmci: Add support for ST Micro derivate	2009-02-02 20:57:06 +01:00
mmci.h	mmci: Add support for ST Micro derivate	2009-02-02 20:57:06 +01:00
mxcmmc.c	mmc: Add a MX2/MX3 specific SDHC driver	2009-02-02 20:57:05 +01:00
of_mmc_spi.c	mmc: struct device - replace bus_id with dev_name(), dev_set_name()	2009-03-24 21:29:57 +01:00
omap.c	…
omap_hsmmc.c	omap_hsmmc: Initialize hsmmc controller registers when resuming	2009-03-24 21:29:59 +01:00
pxamci.c	pxamci: enable DMA for write ops after CMD/RESP	2009-02-02 20:57:07 +01:00
pxamci.h	…
ricoh_mmc.c	ricoh_mmc: Use suspend_late/resume_early	2009-02-02 20:57:06 +01:00
s3cmci.c	mmc: s3cmci: fix s3c2410_dma_config() arguments.	2009-03-12 16:20:24 -07:00
s3cmci.h	…
sdhci-pci.c	sdhci: Add NO_BUSY_IRQ quirk for Marvell CAFE host chip	2009-03-02 21:48:20 +01:00
sdhci.c	sdhci: Add quirk for controllers with no end-of-busy IRQ	2009-03-02 21:46:35 +01:00
sdhci.h	sdhci: Add quirk for controllers with no end-of-busy IRQ	2009-03-02 21:46:35 +01:00
sdricoh_cs.c	…
tifm_sd.c	…
tmio_mmc.c	…
tmio_mmc.h	…
wbsd.c	…
wbsd.h	…