linux/Documentation/video4linux
Hans de Goede 606f8428ca V4L/DVB: Documentation: gspca.txt: update known mr97310a cams
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26 15:11:09 -03:00
..
bttv V4L/DVB (11051): v4l-dvb: replace remaining references to the old mailinglist. 2009-03-30 12:43:23 -03:00
cx88
cx2341x V4L/DVB (10487): doc: update hm12 documentation. 2009-03-30 12:42:41 -03:00
.gitignore
API.html V4L/DVB (10128): modify V4L documentation to be a valid XHTML 2008-12-30 09:40:39 -02:00
cafe_ccic
CARDLIST.au0828
CARDLIST.bttv V4L/DVB (11124): Add support for ProVideo PV-183 to bttv 2009-03-30 12:43:31 -03:00
CARDLIST.cx88 V4L/DVB (13407): Add Prof 7301 PCI DVB-S2 card 2009-12-05 18:41:43 -02:00
CARDLIST.cx23885 V4L/DVB: cx23885: Add support for LEADTEK WinFast PxTV1200 2010-02-26 15:10:52 -03:00
CARDLIST.em28xx V4L/DVB (13528): em28xx: add support for em2800 VC211A card 2009-12-05 18:42:17 -02:00
CARDLIST.ivtv
CARDLIST.saa7134 V4L/DVB (13945): Add lost config and PCI ID for card of Beholder 2010-02-26 15:10:32 -03:00
CARDLIST.saa7164 V4L/DVB (12946): SAA7164: Add support for a new HVR-2250 hardware revision 2009-09-19 00:15:24 -03:00
CARDLIST.tuner V4L/DVB: tuner-types: Add Sony BTF-Pxn01Z tuner type used on GigaPocket cards 2010-02-26 15:11:07 -03:00
CARDLIST.usbvision
cpia2_overview.txt
CQcam.txt V4L/DVB (12370): v4l doc: fix cqcam source code path 2009-09-12 12:18:28 -03:00
cx18.txt trivial: Miscellaneous documentation typo fixes 2009-06-12 18:01:47 +02:00
et61x251.txt
extract_xc3028.pl
gspca.txt V4L/DVB: Documentation: gspca.txt: update known mr97310a cams 2010-02-26 15:11:09 -03:00
hauppauge-wintv-cx88-ir.txt
ibmcam.txt
lifeview.txt
m5602.txt
Makefile
meye.txt
not-in-cx2388x-datasheet.txt
ov511.txt
pxa_camera.txt V4L/DVB (11613): pxa_camera: Documentation of the FSM 2009-06-16 18:20:44 -03:00
radiotrack.txt
README.cpia
README.cpia2
README.cx88
README.ir
README.ivtv
README.pvrusb2
README.saa7134
README.tlg2300 V4L/DVB: tlg2300: remove the country code for analog tv and radio 2010-02-26 15:10:58 -03:00
se401.txt
sh_mobile_ceu_camera.txt V4L/DVB (13651): sh_mobile_ceu_camera: document the scaling and cropping algorithm 2009-12-16 09:27:20 -02:00
si470x.txt V4L/DVB (10530): Documentation and code cleanups 2009-03-30 12:42:45 -03:00
si4713.txt V4L/DVB (13476): spec: remove old dvb-spec and v4l2-spec directories 2009-12-05 18:42:04 -02:00
sn9c102.txt
soc-camera.txt V4L/DVB (12534): soc-camera: V4L2 API compliant scaling (S_FMT) and cropping (S_CROP) 2009-09-19 00:19:17 -03:00
stv680.txt
v4l2-framework.txt V4L/DVB: V4L2 docs: replace spaces by tabs 2010-02-26 15:11:05 -03:00
v4lgrab.c Documentation/: fix warnings from -Wmissing-prototypes in HOSTCFLAGS 2009-09-23 07:39:28 -07:00
videobuf V4L/DVB: V4L2 docs: replace spaces by tabs 2010-02-26 15:11:05 -03:00
w9966.txt
w9968cf.txt
zc0301.txt
Zoran V4L/DVB (10931): zoran: Drop the lock_norm module parameter 2009-03-30 12:43:16 -03:00
zr364xx.txt V4L/DVB (13438): zr364xx: add support for Trust Powerc@m 910Z 2009-12-05 18:41:54 -02:00

tlg2300 release notes
====================

This is a v4l2/dvb device driver for the tlg2300 chip.


current status
==============

video
	- support mmap and read().(no overlay)

audio
	- The driver will register a ALSA card for the audio input.

vbi
	- Works for almost TV norms.

dvb-t
	- works for DVB-T

FM
	- Works for radio.

---------------------------------------------------------------------------
TESTED APPLICATIONS:

-VLC1.0.4 test the video and dvb. The GUI is friendly to use.

-Mplayer test the video.

-Mplayer test the FM. The mplayer should be compiled with --enable-radio and
	 --enable-radio-capture.
	The command runs as this(The alsa audio registers to card 1):
	#mplayer radio://103.7/capture/ -radio adevice=hw=1,0:arate=48000 \
		-rawaudio rate=48000:channels=2

---------------------------------------------------------------------------
KNOWN PROBLEMS:
about preemphasis:
	You can set the preemphasis for radio by the following command:
	#v4l2-ctl -d /dev/radio0 --set-ctrl=pre_emphasis_settings=1

	"pre_emphasis_settings=1" means that you select the 50us. If you want
	to select the 75us, please use "pre_emphasis_settings=2"