linux/include/asm-sparc64/floppy.h
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

811 lines
20 KiB
C

/* $Id: floppy.h,v 1.32 2001/10/26 17:59:36 davem Exp $
* asm-sparc64/floppy.h: Sparc specific parts of the Floppy driver.
*
* Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
* Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
*
* Ultra/PCI support added: Sep 1997 Eddie C. Dost (ecd@skynet.be)
*/
#ifndef __ASM_SPARC64_FLOPPY_H
#define __ASM_SPARC64_FLOPPY_H
#include <linux/config.h>
#include <linux/init.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/system.h>
#include <asm/idprom.h>
#include <asm/oplib.h>
#include <asm/auxio.h>
#include <asm/sbus.h>
#include <asm/irq.h>
/*
* Define this to enable exchanging drive 0 and 1 if only drive 1 is
* probed on PCI machines.
*/
#undef PCI_FDC_SWAP_DRIVES
/* References:
* 1) Netbsd Sun floppy driver.
* 2) NCR 82077 controller manual
* 3) Intel 82077 controller manual
*/
struct sun_flpy_controller {
volatile unsigned char status1_82077; /* Auxiliary Status reg. 1 */
volatile unsigned char status2_82077; /* Auxiliary Status reg. 2 */
volatile unsigned char dor_82077; /* Digital Output reg. */
volatile unsigned char tapectl_82077; /* Tape Control reg */
volatile unsigned char status_82077; /* Main Status Register. */
#define drs_82077 status_82077 /* Digital Rate Select reg. */
volatile unsigned char data_82077; /* Data fifo. */
volatile unsigned char ___unused;
volatile unsigned char dir_82077; /* Digital Input reg. */
#define dcr_82077 dir_82077 /* Config Control reg. */
};
/* You'll only ever find one controller on an Ultra anyways. */
static struct sun_flpy_controller *sun_fdc = (struct sun_flpy_controller *)-1;
unsigned long fdc_status;
static struct sbus_dev *floppy_sdev = NULL;
struct sun_floppy_ops {
unsigned char (*fd_inb) (unsigned long port);
void (*fd_outb) (unsigned char value, unsigned long port);
void (*fd_enable_dma) (void);
void (*fd_disable_dma) (void);
void (*fd_set_dma_mode) (int);
void (*fd_set_dma_addr) (char *);
void (*fd_set_dma_count) (int);
unsigned int (*get_dma_residue) (void);
int (*fd_request_irq) (void);
void (*fd_free_irq) (void);
int (*fd_eject) (int);
};
static struct sun_floppy_ops sun_fdops;
#define fd_inb(port) sun_fdops.fd_inb(port)
#define fd_outb(value,port) sun_fdops.fd_outb(value,port)
#define fd_enable_dma() sun_fdops.fd_enable_dma()
#define fd_disable_dma() sun_fdops.fd_disable_dma()
#define fd_request_dma() (0) /* nothing... */
#define fd_free_dma() /* nothing... */
#define fd_clear_dma_ff() /* nothing... */
#define fd_set_dma_mode(mode) sun_fdops.fd_set_dma_mode(mode)
#define fd_set_dma_addr(addr) sun_fdops.fd_set_dma_addr(addr)
#define fd_set_dma_count(count) sun_fdops.fd_set_dma_count(count)
#define get_dma_residue(x) sun_fdops.get_dma_residue()
#define fd_cacheflush(addr, size) /* nothing... */
#define fd_request_irq() sun_fdops.fd_request_irq()
#define fd_free_irq() sun_fdops.fd_free_irq()
#define fd_eject(drive) sun_fdops.fd_eject(drive)
static int FLOPPY_MOTOR_MASK = 0x10;
/* Super paranoid... */
#undef HAVE_DISABLE_HLT
static int sun_floppy_types[2] = { 0, 0 };
/* Here is where we catch the floppy driver trying to initialize,
* therefore this is where we call the PROM device tree probing
* routine etc. on the Sparc.
*/
#define FLOPPY0_TYPE sun_floppy_init()
#define FLOPPY1_TYPE sun_floppy_types[1]
#define FDC1 ((unsigned long)sun_fdc)
#define N_FDC 1
#define N_DRIVE 8
/* No 64k boundary crossing problems on the Sparc. */
#define CROSS_64KB(a,s) (0)
static unsigned char sun_82077_fd_inb(unsigned long port)
{
udelay(5);
switch(port & 7) {
default:
printk("floppy: Asked to read unknown port %lx\n", port);
panic("floppy: Port bolixed.");
case 4: /* FD_STATUS */
return sbus_readb(&sun_fdc->status_82077) & ~STATUS_DMA;
case 5: /* FD_DATA */
return sbus_readb(&sun_fdc->data_82077);
case 7: /* FD_DIR */
/* XXX: Is DCL on 0x80 in sun4m? */
return sbus_readb(&sun_fdc->dir_82077);
};
panic("sun_82072_fd_inb: How did I get here?");
}
static void sun_82077_fd_outb(unsigned char value, unsigned long port)
{
udelay(5);
switch(port & 7) {
default:
printk("floppy: Asked to write to unknown port %lx\n", port);
panic("floppy: Port bolixed.");
case 2: /* FD_DOR */
/* Happily, the 82077 has a real DOR register. */
sbus_writeb(value, &sun_fdc->dor_82077);
break;
case 5: /* FD_DATA */
sbus_writeb(value, &sun_fdc->data_82077);
break;
case 7: /* FD_DCR */
sbus_writeb(value, &sun_fdc->dcr_82077);
break;
case 4: /* FD_STATUS */
sbus_writeb(value, &sun_fdc->status_82077);
break;
};
return;
}
/* For pseudo-dma (Sun floppy drives have no real DMA available to
* them so we must eat the data fifo bytes directly ourselves) we have
* three state variables. doing_pdma tells our inline low-level
* assembly floppy interrupt entry point whether it should sit and eat
* bytes from the fifo or just transfer control up to the higher level
* floppy interrupt c-code. I tried very hard but I could not get the
* pseudo-dma to work in c-code without getting many overruns and
* underruns. If non-zero, doing_pdma encodes the direction of
* the transfer for debugging. 1=read 2=write
*/
char *pdma_vaddr;
unsigned long pdma_size;
volatile int doing_pdma = 0;
/* This is software state */
char *pdma_base = NULL;
unsigned long pdma_areasize;
/* Common routines to all controller types on the Sparc. */
static void sun_fd_disable_dma(void)
{
doing_pdma = 0;
if (pdma_base) {
mmu_unlockarea(pdma_base, pdma_areasize);
pdma_base = NULL;
}
}
static void sun_fd_set_dma_mode(int mode)
{
switch(mode) {
case DMA_MODE_READ:
doing_pdma = 1;
break;
case DMA_MODE_WRITE:
doing_pdma = 2;
break;
default:
printk("Unknown dma mode %d\n", mode);
panic("floppy: Giving up...");
}
}
static void sun_fd_set_dma_addr(char *buffer)
{
pdma_vaddr = buffer;
}
static void sun_fd_set_dma_count(int length)
{
pdma_size = length;
}
static void sun_fd_enable_dma(void)
{
pdma_vaddr = mmu_lockarea(pdma_vaddr, pdma_size);
pdma_base = pdma_vaddr;
pdma_areasize = pdma_size;
}
/* Our low-level entry point in arch/sparc/kernel/entry.S */
extern irqreturn_t floppy_hardint(int irq, void *unused, struct pt_regs *regs);
static int sun_fd_request_irq(void)
{
static int once = 0;
int error;
if(!once) {
once = 1;
error = request_fast_irq(FLOPPY_IRQ, floppy_hardint,
SA_INTERRUPT, "floppy", NULL);
return ((error == 0) ? 0 : -1);
}
return 0;
}
static void sun_fd_free_irq(void)
{
}
static unsigned int sun_get_dma_residue(void)
{
/* XXX This isn't really correct. XXX */
return 0;
}
static int sun_fd_eject(int drive)
{
set_dor(0x00, 0xff, 0x90);
udelay(500);
set_dor(0x00, 0x6f, 0x00);
udelay(500);
return 0;
}
#ifdef CONFIG_PCI
#include <asm/ebus.h>
#include <asm/isa.h>
#include <asm/ns87303.h>
static struct ebus_dma_info sun_pci_fd_ebus_dma;
static struct pci_dev *sun_pci_ebus_dev;
static int sun_pci_broken_drive = -1;
struct sun_pci_dma_op {
unsigned int addr;
int len;
int direction;
char *buf;
};
static struct sun_pci_dma_op sun_pci_dma_current = { -1U, 0, 0, NULL};
static struct sun_pci_dma_op sun_pci_dma_pending = { -1U, 0, 0, NULL};
extern irqreturn_t floppy_interrupt(int irq, void *dev_id, struct pt_regs *regs);
static unsigned char sun_pci_fd_inb(unsigned long port)
{
udelay(5);
return inb(port);
}
static void sun_pci_fd_outb(unsigned char val, unsigned long port)
{
udelay(5);
outb(val, port);
}
static void sun_pci_fd_broken_outb(unsigned char val, unsigned long port)
{
udelay(5);
/*
* XXX: Due to SUN's broken floppy connector on AX and AXi
* we need to turn on MOTOR_0 also, if the floppy is
* jumpered to DS1 (like most PC floppies are). I hope
* this does not hurt correct hardware like the AXmp.
* (Eddie, Sep 12 1998).
*/
if (port == ((unsigned long)sun_fdc) + 2) {
if (((val & 0x03) == sun_pci_broken_drive) && (val & 0x20)) {
val |= 0x10;
}
}
outb(val, port);
}
#ifdef PCI_FDC_SWAP_DRIVES
static void sun_pci_fd_lde_broken_outb(unsigned char val, unsigned long port)
{
udelay(5);
/*
* XXX: Due to SUN's broken floppy connector on AX and AXi
* we need to turn on MOTOR_0 also, if the floppy is
* jumpered to DS1 (like most PC floppies are). I hope
* this does not hurt correct hardware like the AXmp.
* (Eddie, Sep 12 1998).
*/
if (port == ((unsigned long)sun_fdc) + 2) {
if (((val & 0x03) == sun_pci_broken_drive) && (val & 0x10)) {
val &= ~(0x03);
val |= 0x21;
}
}
outb(val, port);
}
#endif /* PCI_FDC_SWAP_DRIVES */
static void sun_pci_fd_enable_dma(void)
{
BUG_ON((NULL == sun_pci_dma_pending.buf) ||
(0 == sun_pci_dma_pending.len) ||
(0 == sun_pci_dma_pending.direction));
sun_pci_dma_current.buf = sun_pci_dma_pending.buf;
sun_pci_dma_current.len = sun_pci_dma_pending.len;
sun_pci_dma_current.direction = sun_pci_dma_pending.direction;
sun_pci_dma_pending.buf = NULL;
sun_pci_dma_pending.len = 0;
sun_pci_dma_pending.direction = 0;
sun_pci_dma_pending.addr = -1U;
sun_pci_dma_current.addr =
pci_map_single(sun_pci_ebus_dev,
sun_pci_dma_current.buf,
sun_pci_dma_current.len,
sun_pci_dma_current.direction);
ebus_dma_enable(&sun_pci_fd_ebus_dma, 1);
if (ebus_dma_request(&sun_pci_fd_ebus_dma,
sun_pci_dma_current.addr,
sun_pci_dma_current.len))
BUG();
}
static void sun_pci_fd_disable_dma(void)
{
ebus_dma_enable(&sun_pci_fd_ebus_dma, 0);
if (sun_pci_dma_current.addr != -1U)
pci_unmap_single(sun_pci_ebus_dev,
sun_pci_dma_current.addr,
sun_pci_dma_current.len,
sun_pci_dma_current.direction);
sun_pci_dma_current.addr = -1U;
}
static void sun_pci_fd_set_dma_mode(int mode)
{
if (mode == DMA_MODE_WRITE)
sun_pci_dma_pending.direction = PCI_DMA_TODEVICE;
else
sun_pci_dma_pending.direction = PCI_DMA_FROMDEVICE;
ebus_dma_prepare(&sun_pci_fd_ebus_dma, mode != DMA_MODE_WRITE);
}
static void sun_pci_fd_set_dma_count(int length)
{
sun_pci_dma_pending.len = length;
}
static void sun_pci_fd_set_dma_addr(char *buffer)
{
sun_pci_dma_pending.buf = buffer;
}
static unsigned int sun_pci_get_dma_residue(void)
{
return ebus_dma_residue(&sun_pci_fd_ebus_dma);
}
static int sun_pci_fd_request_irq(void)
{
return ebus_dma_irq_enable(&sun_pci_fd_ebus_dma, 1);
}
static void sun_pci_fd_free_irq(void)
{
ebus_dma_irq_enable(&sun_pci_fd_ebus_dma, 0);
}
static int sun_pci_fd_eject(int drive)
{
return -EINVAL;
}
void sun_pci_fd_dma_callback(struct ebus_dma_info *p, int event, void *cookie)
{
floppy_interrupt(0, NULL, NULL);
}
/*
* Floppy probing, we'd like to use /dev/fd0 for a single Floppy on PCI,
* even if this is configured using DS1, thus looks like /dev/fd1 with
* the cabling used in Ultras.
*/
#define DOR (port + 2)
#define MSR (port + 4)
#define FIFO (port + 5)
static void sun_pci_fd_out_byte(unsigned long port, unsigned char val,
unsigned long reg)
{
unsigned char status;
int timeout = 1000;
while (!((status = inb(MSR)) & 0x80) && --timeout)
udelay(100);
outb(val, reg);
}
static unsigned char sun_pci_fd_sensei(unsigned long port)
{
unsigned char result[2] = { 0x70, 0x00 };
unsigned char status;
int i = 0;
sun_pci_fd_out_byte(port, 0x08, FIFO);
do {
int timeout = 1000;
while (!((status = inb(MSR)) & 0x80) && --timeout)
udelay(100);
if (!timeout)
break;
if ((status & 0xf0) == 0xd0)
result[i++] = inb(FIFO);
else
break;
} while (i < 2);
return result[0];
}
static void sun_pci_fd_reset(unsigned long port)
{
unsigned char mask = 0x00;
unsigned char status;
int timeout = 10000;
outb(0x80, MSR);
do {
status = sun_pci_fd_sensei(port);
if ((status & 0xc0) == 0xc0)
mask |= 1 << (status & 0x03);
else
udelay(100);
} while ((mask != 0x0f) && --timeout);
}
static int sun_pci_fd_test_drive(unsigned long port, int drive)
{
unsigned char status, data;
int timeout = 1000;
int ready;
sun_pci_fd_reset(port);
data = (0x10 << drive) | 0x0c | drive;
sun_pci_fd_out_byte(port, data, DOR);
sun_pci_fd_out_byte(port, 0x07, FIFO);
sun_pci_fd_out_byte(port, drive & 0x03, FIFO);
do {
udelay(100);
status = sun_pci_fd_sensei(port);
} while (((status & 0xc0) == 0x80) && --timeout);
if (!timeout)
ready = 0;
else
ready = (status & 0x10) ? 0 : 1;
sun_pci_fd_reset(port);
return ready;
}
#undef FIFO
#undef MSR
#undef DOR
#endif /* CONFIG_PCI */
#ifdef CONFIG_PCI
static int __init ebus_fdthree_p(struct linux_ebus_device *edev)
{
if (!strcmp(edev->prom_name, "fdthree"))
return 1;
if (!strcmp(edev->prom_name, "floppy")) {
char compat[16];
prom_getstring(edev->prom_node,
"compatible",
compat, sizeof(compat));
compat[15] = '\0';
if (!strcmp(compat, "fdthree"))
return 1;
}
return 0;
}
#endif
#ifdef CONFIG_PCI
#undef ISA_FLOPPY_WORKS
#ifdef ISA_FLOPPY_WORKS
static unsigned long __init isa_floppy_init(void)
{
struct sparc_isa_bridge *isa_br;
struct sparc_isa_device *isa_dev = NULL;
for_each_isa(isa_br) {
for_each_isadev(isa_dev, isa_br) {
if (!strcmp(isa_dev->prom_name, "dma")) {
struct sparc_isa_device *child =
isa_dev->child;
while (child) {
if (!strcmp(child->prom_name,
"floppy")) {
isa_dev = child;
goto isa_done;
}
child = child->next;
}
}
}
}
isa_done:
if (!isa_dev)
return 0;
/* We could use DMA on devices behind the ISA bridge, but...
*
* There is a slight problem. Normally on x86 kit the x86 processor
* delays I/O port instructions when the ISA bus "dma in progress"
* signal is active. Well, sparc64 systems do not monitor this
* signal thus we would need to block all I/O port accesses in software
* when a dma transfer is active for some device.
*/
sun_fdc = (struct sun_flpy_controller *)isa_dev->resource.start;
FLOPPY_IRQ = isa_dev->irq;
sun_fdops.fd_inb = sun_pci_fd_inb;
sun_fdops.fd_outb = sun_pci_fd_outb;
can_use_virtual_dma = use_virtual_dma = 1;
sun_fdops.fd_enable_dma = sun_fd_enable_dma;
sun_fdops.fd_disable_dma = sun_fd_disable_dma;
sun_fdops.fd_set_dma_mode = sun_fd_set_dma_mode;
sun_fdops.fd_set_dma_addr = sun_fd_set_dma_addr;
sun_fdops.fd_set_dma_count = sun_fd_set_dma_count;
sun_fdops.get_dma_residue = sun_get_dma_residue;
sun_fdops.fd_request_irq = sun_fd_request_irq;
sun_fdops.fd_free_irq = sun_fd_free_irq;
/* Floppy eject is manual. Actually, could determine this
* via presence of 'manual' property in OBP node.
*/
sun_fdops.fd_eject = sun_pci_fd_eject;
fdc_status = (unsigned long) &sun_fdc->status_82077;
FLOPPY_MOTOR_MASK = 0xf0;
allowed_drive_mask = 0;
sun_floppy_types[0] = 0;
sun_floppy_types[1] = 4;
sun_pci_broken_drive = 1;
sun_fdops.fd_outb = sun_pci_fd_broken_outb;
return sun_floppy_types[0];
}
#endif /* ISA_FLOPPY_WORKS */
#endif
static unsigned long __init sun_floppy_init(void)
{
char state[128];
struct sbus_bus *bus;
struct sbus_dev *sdev = NULL;
static int initialized = 0;
if (initialized)
return sun_floppy_types[0];
initialized = 1;
for_all_sbusdev (sdev, bus) {
if (!strcmp(sdev->prom_name, "SUNW,fdtwo"))
break;
}
if(sdev) {
floppy_sdev = sdev;
FLOPPY_IRQ = sdev->irqs[0];
} else {
#ifdef CONFIG_PCI
struct linux_ebus *ebus;
struct linux_ebus_device *edev = NULL;
unsigned long config = 0;
unsigned long auxio_reg;
for_each_ebus(ebus) {
for_each_ebusdev(edev, ebus) {
if (ebus_fdthree_p(edev))
goto ebus_done;
}
}
ebus_done:
if (!edev) {
#ifdef ISA_FLOPPY_WORKS
return isa_floppy_init();
#else
return 0;
#endif
}
prom_getproperty(edev->prom_node, "status",
state, sizeof(state));
if (!strncmp(state, "disabled", 8))
return 0;
FLOPPY_IRQ = edev->irqs[0];
/* Make sure the high density bit is set, some systems
* (most notably Ultra5/Ultra10) come up with it clear.
*/
auxio_reg = edev->resource[2].start;
writel(readl(auxio_reg)|0x2, auxio_reg);
sun_pci_ebus_dev = ebus->self;
spin_lock_init(&sun_pci_fd_ebus_dma.lock);
/* XXX ioremap */
sun_pci_fd_ebus_dma.regs = edev->resource[1].start;
if (!sun_pci_fd_ebus_dma.regs)
return 0;
sun_pci_fd_ebus_dma.flags = (EBUS_DMA_FLAG_USE_EBDMA_HANDLER |
EBUS_DMA_FLAG_TCI_DISABLE);
sun_pci_fd_ebus_dma.callback = sun_pci_fd_dma_callback;
sun_pci_fd_ebus_dma.client_cookie = NULL;
sun_pci_fd_ebus_dma.irq = FLOPPY_IRQ;
strcpy(sun_pci_fd_ebus_dma.name, "floppy");
if (ebus_dma_register(&sun_pci_fd_ebus_dma))
return 0;
/* XXX ioremap */
sun_fdc = (struct sun_flpy_controller *)edev->resource[0].start;
sun_fdops.fd_inb = sun_pci_fd_inb;
sun_fdops.fd_outb = sun_pci_fd_outb;
can_use_virtual_dma = use_virtual_dma = 0;
sun_fdops.fd_enable_dma = sun_pci_fd_enable_dma;
sun_fdops.fd_disable_dma = sun_pci_fd_disable_dma;
sun_fdops.fd_set_dma_mode = sun_pci_fd_set_dma_mode;
sun_fdops.fd_set_dma_addr = sun_pci_fd_set_dma_addr;
sun_fdops.fd_set_dma_count = sun_pci_fd_set_dma_count;
sun_fdops.get_dma_residue = sun_pci_get_dma_residue;
sun_fdops.fd_request_irq = sun_pci_fd_request_irq;
sun_fdops.fd_free_irq = sun_pci_fd_free_irq;
sun_fdops.fd_eject = sun_pci_fd_eject;
fdc_status = (unsigned long) &sun_fdc->status_82077;
FLOPPY_MOTOR_MASK = 0xf0;
/*
* XXX: Find out on which machines this is really needed.
*/
if (1) {
sun_pci_broken_drive = 1;
sun_fdops.fd_outb = sun_pci_fd_broken_outb;
}
allowed_drive_mask = 0;
if (sun_pci_fd_test_drive((unsigned long)sun_fdc, 0))
sun_floppy_types[0] = 4;
if (sun_pci_fd_test_drive((unsigned long)sun_fdc, 1))
sun_floppy_types[1] = 4;
/*
* Find NS87303 SuperIO config registers (through ecpp).
*/
for_each_ebus(ebus) {
for_each_ebusdev(edev, ebus) {
if (!strcmp(edev->prom_name, "ecpp")) {
config = edev->resource[1].start;
goto config_done;
}
}
}
config_done:
/*
* Sanity check, is this really the NS87303?
*/
switch (config & 0x3ff) {
case 0x02e:
case 0x15c:
case 0x26e:
case 0x398:
break;
default:
config = 0;
}
if (!config)
return sun_floppy_types[0];
/* Enable PC-AT mode. */
ns87303_modify(config, ASC, 0, 0xc0);
#ifdef PCI_FDC_SWAP_DRIVES
/*
* If only Floppy 1 is present, swap drives.
*/
if (!sun_floppy_types[0] && sun_floppy_types[1]) {
/*
* Set the drive exchange bit in FCR on NS87303,
* make shure other bits are sane before doing so.
*/
ns87303_modify(config, FER, FER_EDM, 0);
ns87303_modify(config, ASC, ASC_DRV2_SEL, 0);
ns87303_modify(config, FCR, 0, FCR_LDE);
config = sun_floppy_types[0];
sun_floppy_types[0] = sun_floppy_types[1];
sun_floppy_types[1] = config;
if (sun_pci_broken_drive != -1) {
sun_pci_broken_drive = 1 - sun_pci_broken_drive;
sun_fdops.fd_outb = sun_pci_fd_lde_broken_outb;
}
}
#endif /* PCI_FDC_SWAP_DRIVES */
return sun_floppy_types[0];
#else
return 0;
#endif
}
prom_getproperty(sdev->prom_node, "status", state, sizeof(state));
if(!strncmp(state, "disabled", 8))
return 0;
/*
* We cannot do sbus_ioremap here: it does request_region,
* which the generic floppy driver tries to do once again.
* But we must use the sdev resource values as they have
* had parent ranges applied.
*/
sun_fdc = (struct sun_flpy_controller *)
(sdev->resource[0].start +
((sdev->resource[0].flags & 0x1ffUL) << 32UL));
/* Last minute sanity check... */
if(sbus_readb(&sun_fdc->status1_82077) == 0xff) {
sun_fdc = (struct sun_flpy_controller *)-1;
return 0;
}
sun_fdops.fd_inb = sun_82077_fd_inb;
sun_fdops.fd_outb = sun_82077_fd_outb;
can_use_virtual_dma = use_virtual_dma = 1;
sun_fdops.fd_enable_dma = sun_fd_enable_dma;
sun_fdops.fd_disable_dma = sun_fd_disable_dma;
sun_fdops.fd_set_dma_mode = sun_fd_set_dma_mode;
sun_fdops.fd_set_dma_addr = sun_fd_set_dma_addr;
sun_fdops.fd_set_dma_count = sun_fd_set_dma_count;
sun_fdops.get_dma_residue = sun_get_dma_residue;
sun_fdops.fd_request_irq = sun_fd_request_irq;
sun_fdops.fd_free_irq = sun_fd_free_irq;
sun_fdops.fd_eject = sun_fd_eject;
fdc_status = (unsigned long) &sun_fdc->status_82077;
/* Success... */
allowed_drive_mask = 0x01;
sun_floppy_types[0] = 4;
sun_floppy_types[1] = 0;
return sun_floppy_types[0];
}
#define EXTRA_FLOPPY_PARAMS
#endif /* !(__ASM_SPARC64_FLOPPY_H) */