linux/drivers/net/wireless/rt2x00/rt2x00firmware.c
Ivo van Doorn 7dab73b37f rt2x00: Split rt2x00dev->flags
The number of flags defined for the rt2x00dev->flags field,
has been growing over the years. Currently we are approaching
the maximum number of bits which are available in the field.

A secondary problem, is that one part of the field are initialized only
during boot, because the driver requirements are initialized or device
requirements are loaded from the EEPROM. In both cases, the flags are
fixed and will not change during device operation. The other flags are
the device state, and will change frequently. So far this resulted in the fact
that for some flags, the atomic bit accessors are used, while for the others
the non-atomic variants are used.

By splitting the flags up into a "flags" and "cap_flags" we can put all flags
which are fixed inside "cap_flags". This field can then be read non-atomically.
In the "flags" field we keep the device state, which is going to be read atomically.

This adds more room for more flags in the future, and sanitizes the field access methods.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-19 15:39:11 -04:00

132 lines
3.3 KiB
C

/*
Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
Copyright (C) 2004 - 2009 Gertjan van Wingerde <gwingerde@gmail.com>
<http://rt2x00.serialmonkey.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the
Free Software Foundation, Inc.,
59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
/*
Module: rt2x00lib
Abstract: rt2x00 firmware loading routines.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include "rt2x00.h"
#include "rt2x00lib.h"
static int rt2x00lib_request_firmware(struct rt2x00_dev *rt2x00dev)
{
struct device *device = wiphy_dev(rt2x00dev->hw->wiphy);
const struct firmware *fw;
char *fw_name;
int retval;
/*
* Read correct firmware from harddisk.
*/
fw_name = rt2x00dev->ops->lib->get_firmware_name(rt2x00dev);
if (!fw_name) {
ERROR(rt2x00dev,
"Invalid firmware filename.\n"
"Please file bug report to %s.\n", DRV_PROJECT);
return -EINVAL;
}
INFO(rt2x00dev, "Loading firmware file '%s'.\n", fw_name);
retval = request_firmware(&fw, fw_name, device);
if (retval) {
ERROR(rt2x00dev, "Failed to request Firmware.\n");
return retval;
}
if (!fw || !fw->size || !fw->data) {
ERROR(rt2x00dev, "Failed to read Firmware.\n");
release_firmware(fw);
return -ENOENT;
}
INFO(rt2x00dev, "Firmware detected - version: %d.%d.\n",
fw->data[fw->size - 4], fw->data[fw->size - 3]);
snprintf(rt2x00dev->hw->wiphy->fw_version,
sizeof(rt2x00dev->hw->wiphy->fw_version), "%d.%d",
fw->data[fw->size - 4], fw->data[fw->size - 3]);
retval = rt2x00dev->ops->lib->check_firmware(rt2x00dev, fw->data, fw->size);
switch (retval) {
case FW_OK:
break;
case FW_BAD_CRC:
ERROR(rt2x00dev, "Firmware checksum error.\n");
goto exit;
case FW_BAD_LENGTH:
ERROR(rt2x00dev,
"Invalid firmware file length (len=%zu)\n", fw->size);
goto exit;
case FW_BAD_VERSION:
ERROR(rt2x00dev,
"Current firmware does not support detected chipset.\n");
goto exit;
}
rt2x00dev->fw = fw;
return 0;
exit:
release_firmware(fw);
return -ENOENT;
}
int rt2x00lib_load_firmware(struct rt2x00_dev *rt2x00dev)
{
int retval;
if (!test_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags))
return 0;
if (!rt2x00dev->fw) {
retval = rt2x00lib_request_firmware(rt2x00dev);
if (retval)
return retval;
}
/*
* Send firmware to the device.
*/
retval = rt2x00dev->ops->lib->load_firmware(rt2x00dev,
rt2x00dev->fw->data,
rt2x00dev->fw->size);
/*
* When the firmware is uploaded to the hardware the LED
* association status might have been triggered, for correct
* LED handling it should now be reset.
*/
rt2x00leds_led_assoc(rt2x00dev, false);
return retval;
}
void rt2x00lib_free_firmware(struct rt2x00_dev *rt2x00dev)
{
release_firmware(rt2x00dev->fw);
rt2x00dev->fw = NULL;
}