0937282036
Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
592 lines
17 KiB
C
592 lines
17 KiB
C
/*******************************************************************
|
|
* This file is part of the Emulex Linux Device Driver for *
|
|
* Fibre Channel Host Bus Adapters. *
|
|
* Copyright (C) 2004-2006 Emulex. All rights reserved. *
|
|
* EMULEX and SLI are trademarks of Emulex. *
|
|
* www.emulex.com *
|
|
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
|
|
* *
|
|
* This program is free software; you can redistribute it and/or *
|
|
* modify it under the terms of version 2 of the GNU General *
|
|
* Public License as published by the Free Software Foundation. *
|
|
* This program is distributed in the hope that it will be useful. *
|
|
* ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
|
|
* WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
|
|
* FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
|
|
* DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
|
|
* TO BE LEGALLY INVALID. See the GNU General Public License for *
|
|
* more details, a copy of which can be found in the file COPYING *
|
|
* included with this package. *
|
|
*******************************************************************/
|
|
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/idr.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kthread.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#include <scsi/scsi.h>
|
|
#include <scsi/scsi_device.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <scsi/scsi_transport_fc.h>
|
|
#include "lpfc_hw.h"
|
|
#include "lpfc_sli.h"
|
|
#include "lpfc_disc.h"
|
|
#include "lpfc_scsi.h"
|
|
#include "lpfc.h"
|
|
#include "lpfc_logmsg.h"
|
|
#include "lpfc_crtn.h"
|
|
#include "lpfc_version.h"
|
|
#include "lpfc_vport.h"
|
|
|
|
inline void lpfc_vport_set_state(struct lpfc_vport *vport,
|
|
enum fc_vport_state new_state)
|
|
{
|
|
struct fc_vport *fc_vport = vport->fc_vport;
|
|
|
|
if (fc_vport) {
|
|
/*
|
|
* When the transport defines fc_vport_set state we will replace
|
|
* this code with the following line
|
|
*/
|
|
/* fc_vport_set_state(fc_vport, new_state); */
|
|
if (new_state != FC_VPORT_INITIALIZING)
|
|
fc_vport->vport_last_state = fc_vport->vport_state;
|
|
fc_vport->vport_state = new_state;
|
|
}
|
|
|
|
/* for all the error states we will set the invternal state to FAILED */
|
|
switch (new_state) {
|
|
case FC_VPORT_NO_FABRIC_SUPP:
|
|
case FC_VPORT_NO_FABRIC_RSCS:
|
|
case FC_VPORT_FABRIC_LOGOUT:
|
|
case FC_VPORT_FABRIC_REJ_WWN:
|
|
case FC_VPORT_FAILED:
|
|
vport->port_state = LPFC_VPORT_FAILED;
|
|
break;
|
|
case FC_VPORT_LINKDOWN:
|
|
vport->port_state = LPFC_VPORT_UNKNOWN;
|
|
break;
|
|
default:
|
|
/* do nothing */
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int
|
|
lpfc_alloc_vpi(struct lpfc_hba *phba)
|
|
{
|
|
int vpi;
|
|
|
|
spin_lock_irq(&phba->hbalock);
|
|
/* Start at bit 1 because vpi zero is reserved for the physical port */
|
|
vpi = find_next_zero_bit(phba->vpi_bmask, (phba->max_vpi + 1), 1);
|
|
if (vpi > phba->max_vpi)
|
|
vpi = 0;
|
|
else
|
|
set_bit(vpi, phba->vpi_bmask);
|
|
spin_unlock_irq(&phba->hbalock);
|
|
return vpi;
|
|
}
|
|
|
|
static void
|
|
lpfc_free_vpi(struct lpfc_hba *phba, int vpi)
|
|
{
|
|
spin_lock_irq(&phba->hbalock);
|
|
clear_bit(vpi, phba->vpi_bmask);
|
|
spin_unlock_irq(&phba->hbalock);
|
|
}
|
|
|
|
static int
|
|
lpfc_vport_sparm(struct lpfc_hba *phba, struct lpfc_vport *vport)
|
|
{
|
|
LPFC_MBOXQ_t *pmb;
|
|
MAILBOX_t *mb;
|
|
struct lpfc_dmabuf *mp;
|
|
int rc;
|
|
|
|
pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
|
|
if (!pmb) {
|
|
return -ENOMEM;
|
|
}
|
|
mb = &pmb->mb;
|
|
|
|
lpfc_read_sparam(phba, pmb, vport->vpi);
|
|
/*
|
|
* Grab buffer pointer and clear context1 so we can use
|
|
* lpfc_sli_issue_box_wait
|
|
*/
|
|
mp = (struct lpfc_dmabuf *) pmb->context1;
|
|
pmb->context1 = NULL;
|
|
|
|
pmb->vport = vport;
|
|
rc = lpfc_sli_issue_mbox_wait(phba, pmb, phba->fc_ratov * 2);
|
|
if (rc != MBX_SUCCESS) {
|
|
if (signal_pending(current)) {
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT | LOG_VPORT,
|
|
"1830 Signal aborted mbxCmd x%x\n",
|
|
mb->mbxCommand);
|
|
lpfc_mbuf_free(phba, mp->virt, mp->phys);
|
|
kfree(mp);
|
|
if (rc != MBX_TIMEOUT)
|
|
mempool_free(pmb, phba->mbox_mem_pool);
|
|
return -EINTR;
|
|
} else {
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT | LOG_VPORT,
|
|
"1818 VPort failed init, mbxCmd x%x "
|
|
"READ_SPARM mbxStatus x%x, rc = x%x\n",
|
|
mb->mbxCommand, mb->mbxStatus, rc);
|
|
lpfc_mbuf_free(phba, mp->virt, mp->phys);
|
|
kfree(mp);
|
|
if (rc != MBX_TIMEOUT)
|
|
mempool_free(pmb, phba->mbox_mem_pool);
|
|
return -EIO;
|
|
}
|
|
}
|
|
|
|
memcpy(&vport->fc_sparam, mp->virt, sizeof (struct serv_parm));
|
|
memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName,
|
|
sizeof (struct lpfc_name));
|
|
memcpy(&vport->fc_portname, &vport->fc_sparam.portName,
|
|
sizeof (struct lpfc_name));
|
|
|
|
lpfc_mbuf_free(phba, mp->virt, mp->phys);
|
|
kfree(mp);
|
|
mempool_free(pmb, phba->mbox_mem_pool);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
lpfc_valid_wwn_format(struct lpfc_hba *phba, struct lpfc_name *wwn,
|
|
const char *name_type)
|
|
{
|
|
/* ensure that IEEE format 1 addresses
|
|
* contain zeros in bits 59-48
|
|
*/
|
|
if (!((wwn->u.wwn[0] >> 4) == 1 &&
|
|
((wwn->u.wwn[0] & 0xf) != 0 || (wwn->u.wwn[1] & 0xf) != 0)))
|
|
return 1;
|
|
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
|
|
"1822 Invalid %s: %02x:%02x:%02x:%02x:"
|
|
"%02x:%02x:%02x:%02x\n",
|
|
name_type,
|
|
wwn->u.wwn[0], wwn->u.wwn[1],
|
|
wwn->u.wwn[2], wwn->u.wwn[3],
|
|
wwn->u.wwn[4], wwn->u.wwn[5],
|
|
wwn->u.wwn[6], wwn->u.wwn[7]);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
lpfc_unique_wwpn(struct lpfc_hba *phba, struct lpfc_vport *new_vport)
|
|
{
|
|
struct lpfc_vport *vport;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&phba->hbalock, flags);
|
|
list_for_each_entry(vport, &phba->port_list, listentry) {
|
|
if (vport == new_vport)
|
|
continue;
|
|
/* If they match, return not unique */
|
|
if (memcmp(&vport->fc_sparam.portName,
|
|
&new_vport->fc_sparam.portName,
|
|
sizeof(struct lpfc_name)) == 0) {
|
|
spin_unlock_irqrestore(&phba->hbalock, flags);
|
|
return 0;
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&phba->hbalock, flags);
|
|
return 1;
|
|
}
|
|
|
|
int
|
|
lpfc_vport_create(struct fc_vport *fc_vport, bool disable)
|
|
{
|
|
struct lpfc_nodelist *ndlp;
|
|
struct Scsi_Host *shost = fc_vport->shost;
|
|
struct lpfc_vport *pport = (struct lpfc_vport *) shost->hostdata;
|
|
struct lpfc_hba *phba = pport->phba;
|
|
struct lpfc_vport *vport = NULL;
|
|
int instance;
|
|
int vpi;
|
|
int rc = VPORT_ERROR;
|
|
int status;
|
|
|
|
if ((phba->sli_rev < 3) ||
|
|
!(phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)) {
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
|
|
"1808 Create VPORT failed: "
|
|
"NPIV is not enabled: SLImode:%d\n",
|
|
phba->sli_rev);
|
|
rc = VPORT_INVAL;
|
|
goto error_out;
|
|
}
|
|
|
|
vpi = lpfc_alloc_vpi(phba);
|
|
if (vpi == 0) {
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
|
|
"1809 Create VPORT failed: "
|
|
"Max VPORTs (%d) exceeded\n",
|
|
phba->max_vpi);
|
|
rc = VPORT_NORESOURCES;
|
|
goto error_out;
|
|
}
|
|
|
|
|
|
/* Assign an unused board number */
|
|
if ((instance = lpfc_get_instance()) < 0) {
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
|
|
"1810 Create VPORT failed: Cannot get "
|
|
"instance number\n");
|
|
lpfc_free_vpi(phba, vpi);
|
|
rc = VPORT_NORESOURCES;
|
|
goto error_out;
|
|
}
|
|
|
|
vport = lpfc_create_port(phba, instance, &fc_vport->dev);
|
|
if (!vport) {
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
|
|
"1811 Create VPORT failed: vpi x%x\n", vpi);
|
|
lpfc_free_vpi(phba, vpi);
|
|
rc = VPORT_NORESOURCES;
|
|
goto error_out;
|
|
}
|
|
|
|
vport->vpi = vpi;
|
|
lpfc_debugfs_initialize(vport);
|
|
|
|
if ((status = lpfc_vport_sparm(phba, vport))) {
|
|
if (status == -EINTR) {
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
|
|
"1831 Create VPORT Interrupted.\n");
|
|
rc = VPORT_ERROR;
|
|
} else {
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
|
|
"1813 Create VPORT failed. "
|
|
"Cannot get sparam\n");
|
|
rc = VPORT_NORESOURCES;
|
|
}
|
|
lpfc_free_vpi(phba, vpi);
|
|
destroy_port(vport);
|
|
goto error_out;
|
|
}
|
|
|
|
memcpy(vport->fc_portname.u.wwn, vport->fc_sparam.portName.u.wwn, 8);
|
|
memcpy(vport->fc_nodename.u.wwn, vport->fc_sparam.nodeName.u.wwn, 8);
|
|
|
|
if (fc_vport->node_name != 0)
|
|
u64_to_wwn(fc_vport->node_name, vport->fc_nodename.u.wwn);
|
|
if (fc_vport->port_name != 0)
|
|
u64_to_wwn(fc_vport->port_name, vport->fc_portname.u.wwn);
|
|
|
|
memcpy(&vport->fc_sparam.portName, vport->fc_portname.u.wwn, 8);
|
|
memcpy(&vport->fc_sparam.nodeName, vport->fc_nodename.u.wwn, 8);
|
|
|
|
if (!lpfc_valid_wwn_format(phba, &vport->fc_sparam.nodeName, "WWNN") ||
|
|
!lpfc_valid_wwn_format(phba, &vport->fc_sparam.portName, "WWPN")) {
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
|
|
"1821 Create VPORT failed. "
|
|
"Invalid WWN format\n");
|
|
lpfc_free_vpi(phba, vpi);
|
|
destroy_port(vport);
|
|
rc = VPORT_INVAL;
|
|
goto error_out;
|
|
}
|
|
|
|
if (!lpfc_unique_wwpn(phba, vport)) {
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
|
|
"1823 Create VPORT failed. "
|
|
"Duplicate WWN on HBA\n");
|
|
lpfc_free_vpi(phba, vpi);
|
|
destroy_port(vport);
|
|
rc = VPORT_INVAL;
|
|
goto error_out;
|
|
}
|
|
|
|
*(struct lpfc_vport **)fc_vport->dd_data = vport;
|
|
vport->fc_vport = fc_vport;
|
|
|
|
if ((phba->link_state < LPFC_LINK_UP) ||
|
|
(phba->fc_topology == TOPOLOGY_LOOP)) {
|
|
lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN);
|
|
rc = VPORT_OK;
|
|
goto out;
|
|
}
|
|
|
|
if (disable) {
|
|
rc = VPORT_OK;
|
|
goto out;
|
|
}
|
|
|
|
/* Use the Physical nodes Fabric NDLP to determine if the link is
|
|
* up and ready to FDISC.
|
|
*/
|
|
ndlp = lpfc_findnode_did(phba->pport, Fabric_DID);
|
|
if (ndlp && ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) {
|
|
if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) {
|
|
lpfc_set_disctmo(vport);
|
|
lpfc_initial_fdisc(vport);
|
|
} else {
|
|
lpfc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP);
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
|
|
"0262 No NPIV Fabric support\n");
|
|
}
|
|
} else {
|
|
lpfc_vport_set_state(vport, FC_VPORT_FAILED);
|
|
}
|
|
rc = VPORT_OK;
|
|
|
|
out:
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
|
|
"1825 Vport Created.\n");
|
|
lpfc_host_attrib_init(lpfc_shost_from_vport(vport));
|
|
error_out:
|
|
return rc;
|
|
}
|
|
|
|
static int
|
|
disable_vport(struct fc_vport *fc_vport)
|
|
{
|
|
struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data;
|
|
struct lpfc_hba *phba = vport->phba;
|
|
struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL;
|
|
long timeout;
|
|
|
|
ndlp = lpfc_findnode_did(vport, Fabric_DID);
|
|
if (ndlp && phba->link_state >= LPFC_LINK_UP) {
|
|
vport->unreg_vpi_cmpl = VPORT_INVAL;
|
|
timeout = msecs_to_jiffies(phba->fc_ratov * 2000);
|
|
if (!lpfc_issue_els_npiv_logo(vport, ndlp))
|
|
while (vport->unreg_vpi_cmpl == VPORT_INVAL && timeout)
|
|
timeout = schedule_timeout(timeout);
|
|
}
|
|
|
|
lpfc_sli_host_down(vport);
|
|
|
|
/* Mark all nodes for discovery so we can remove them by
|
|
* calling lpfc_cleanup_rpis(vport, 1)
|
|
*/
|
|
list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
|
|
if (ndlp->nlp_state == NLP_STE_UNUSED_NODE)
|
|
continue;
|
|
lpfc_disc_state_machine(vport, ndlp, NULL,
|
|
NLP_EVT_DEVICE_RECOVERY);
|
|
}
|
|
lpfc_cleanup_rpis(vport, 1);
|
|
|
|
lpfc_stop_vport_timers(vport);
|
|
lpfc_unreg_all_rpis(vport);
|
|
lpfc_unreg_default_rpis(vport);
|
|
/*
|
|
* Completion of unreg_vpi (lpfc_mbx_cmpl_unreg_vpi) does the
|
|
* scsi_host_put() to release the vport.
|
|
*/
|
|
lpfc_mbx_unreg_vpi(vport);
|
|
|
|
lpfc_vport_set_state(vport, FC_VPORT_DISABLED);
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
|
|
"1826 Vport Disabled.\n");
|
|
return VPORT_OK;
|
|
}
|
|
|
|
static int
|
|
enable_vport(struct fc_vport *fc_vport)
|
|
{
|
|
struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data;
|
|
struct lpfc_hba *phba = vport->phba;
|
|
struct lpfc_nodelist *ndlp = NULL;
|
|
|
|
if ((phba->link_state < LPFC_LINK_UP) ||
|
|
(phba->fc_topology == TOPOLOGY_LOOP)) {
|
|
lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN);
|
|
return VPORT_OK;
|
|
}
|
|
|
|
vport->load_flag |= FC_LOADING;
|
|
vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
|
|
|
|
/* Use the Physical nodes Fabric NDLP to determine if the link is
|
|
* up and ready to FDISC.
|
|
*/
|
|
ndlp = lpfc_findnode_did(phba->pport, Fabric_DID);
|
|
if (ndlp && ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) {
|
|
if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) {
|
|
lpfc_set_disctmo(vport);
|
|
lpfc_initial_fdisc(vport);
|
|
} else {
|
|
lpfc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP);
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
|
|
"0264 No NPIV Fabric support\n");
|
|
}
|
|
} else {
|
|
lpfc_vport_set_state(vport, FC_VPORT_FAILED);
|
|
}
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
|
|
"1827 Vport Enabled.\n");
|
|
return VPORT_OK;
|
|
}
|
|
|
|
int
|
|
lpfc_vport_disable(struct fc_vport *fc_vport, bool disable)
|
|
{
|
|
if (disable)
|
|
return disable_vport(fc_vport);
|
|
else
|
|
return enable_vport(fc_vport);
|
|
}
|
|
|
|
|
|
int
|
|
lpfc_vport_delete(struct fc_vport *fc_vport)
|
|
{
|
|
struct lpfc_nodelist *ndlp = NULL;
|
|
struct Scsi_Host *shost = (struct Scsi_Host *) fc_vport->shost;
|
|
struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data;
|
|
struct lpfc_hba *phba = vport->phba;
|
|
long timeout;
|
|
|
|
if (vport->port_type == LPFC_PHYSICAL_PORT) {
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
|
|
"1812 vport_delete failed: Cannot delete "
|
|
"physical host\n");
|
|
return VPORT_ERROR;
|
|
}
|
|
/*
|
|
* If we are not unloading the driver then prevent the vport_delete
|
|
* from happening until after this vport's discovery is finished.
|
|
*/
|
|
if (!(phba->pport->load_flag & FC_UNLOADING)) {
|
|
int check_count = 0;
|
|
while (check_count < ((phba->fc_ratov * 3) + 3) &&
|
|
vport->port_state > LPFC_VPORT_FAILED &&
|
|
vport->port_state < LPFC_VPORT_READY) {
|
|
check_count++;
|
|
msleep(1000);
|
|
}
|
|
if (vport->port_state > LPFC_VPORT_FAILED &&
|
|
vport->port_state < LPFC_VPORT_READY)
|
|
return -EAGAIN;
|
|
}
|
|
/*
|
|
* This is a bit of a mess. We want to ensure the shost doesn't get
|
|
* torn down until we're done with the embedded lpfc_vport structure.
|
|
*
|
|
* Beyond holding a reference for this function, we also need a
|
|
* reference for outstanding I/O requests we schedule during delete
|
|
* processing. But once we scsi_remove_host() we can no longer obtain
|
|
* a reference through scsi_host_get().
|
|
*
|
|
* So we take two references here. We release one reference at the
|
|
* bottom of the function -- after delinking the vport. And we
|
|
* release the other at the completion of the unreg_vpi that get's
|
|
* initiated after we've disposed of all other resources associated
|
|
* with the port.
|
|
*/
|
|
if (!scsi_host_get(shost) || !scsi_host_get(shost))
|
|
return VPORT_INVAL;
|
|
spin_lock_irq(&phba->hbalock);
|
|
vport->load_flag |= FC_UNLOADING;
|
|
spin_unlock_irq(&phba->hbalock);
|
|
kfree(vport->vname);
|
|
lpfc_debugfs_terminate(vport);
|
|
fc_remove_host(lpfc_shost_from_vport(vport));
|
|
scsi_remove_host(lpfc_shost_from_vport(vport));
|
|
|
|
ndlp = lpfc_findnode_did(phba->pport, Fabric_DID);
|
|
if (ndlp && ndlp->nlp_state == NLP_STE_UNMAPPED_NODE &&
|
|
phba->link_state >= LPFC_LINK_UP) {
|
|
if (vport->cfg_enable_da_id) {
|
|
timeout = msecs_to_jiffies(phba->fc_ratov * 2000);
|
|
if (!lpfc_ns_cmd(vport, SLI_CTNS_DA_ID, 0, 0))
|
|
while (vport->ct_flags && timeout)
|
|
timeout = schedule_timeout(timeout);
|
|
else
|
|
lpfc_printf_log(vport->phba, KERN_WARNING,
|
|
LOG_VPORT,
|
|
"1829 CT command failed to "
|
|
"delete objects on fabric. \n");
|
|
}
|
|
/* First look for the Fabric ndlp */
|
|
ndlp = lpfc_findnode_did(vport, Fabric_DID);
|
|
if (!ndlp) {
|
|
/* Cannot find existing Fabric ndlp, allocate one */
|
|
ndlp = mempool_alloc(phba->nlp_mem_pool, GFP_KERNEL);
|
|
if (!ndlp)
|
|
goto skip_logo;
|
|
lpfc_nlp_init(vport, ndlp, Fabric_DID);
|
|
} else {
|
|
lpfc_dequeue_node(vport, ndlp);
|
|
}
|
|
vport->unreg_vpi_cmpl = VPORT_INVAL;
|
|
timeout = msecs_to_jiffies(phba->fc_ratov * 2000);
|
|
if (!lpfc_issue_els_npiv_logo(vport, ndlp))
|
|
while (vport->unreg_vpi_cmpl == VPORT_INVAL && timeout)
|
|
timeout = schedule_timeout(timeout);
|
|
}
|
|
|
|
skip_logo:
|
|
lpfc_cleanup(vport);
|
|
lpfc_sli_host_down(vport);
|
|
|
|
lpfc_stop_vport_timers(vport);
|
|
lpfc_unreg_all_rpis(vport);
|
|
|
|
if (!(phba->pport->load_flag & FC_UNLOADING)) {
|
|
lpfc_unreg_default_rpis(vport);
|
|
/*
|
|
* Completion of unreg_vpi (lpfc_mbx_cmpl_unreg_vpi)
|
|
* does the scsi_host_put() to release the vport.
|
|
*/
|
|
lpfc_mbx_unreg_vpi(vport);
|
|
}
|
|
|
|
lpfc_free_vpi(phba, vport->vpi);
|
|
vport->work_port_events = 0;
|
|
spin_lock_irq(&phba->hbalock);
|
|
list_del_init(&vport->listentry);
|
|
spin_unlock_irq(&phba->hbalock);
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
|
|
"1828 Vport Deleted.\n");
|
|
scsi_host_put(shost);
|
|
return VPORT_OK;
|
|
}
|
|
|
|
struct lpfc_vport **
|
|
lpfc_create_vport_work_array(struct lpfc_hba *phba)
|
|
{
|
|
struct lpfc_vport *port_iterator;
|
|
struct lpfc_vport **vports;
|
|
int index = 0;
|
|
vports = kzalloc((phba->max_vpi + 1) * sizeof(struct lpfc_vport *),
|
|
GFP_KERNEL);
|
|
if (vports == NULL)
|
|
return NULL;
|
|
spin_lock_irq(&phba->hbalock);
|
|
list_for_each_entry(port_iterator, &phba->port_list, listentry) {
|
|
if (!scsi_host_get(lpfc_shost_from_vport(port_iterator))) {
|
|
lpfc_printf_vlog(port_iterator, KERN_WARNING, LOG_VPORT,
|
|
"1801 Create vport work array FAILED: "
|
|
"cannot do scsi_host_get\n");
|
|
continue;
|
|
}
|
|
vports[index++] = port_iterator;
|
|
}
|
|
spin_unlock_irq(&phba->hbalock);
|
|
return vports;
|
|
}
|
|
|
|
void
|
|
lpfc_destroy_vport_work_array(struct lpfc_hba *phba, struct lpfc_vport **vports)
|
|
{
|
|
int i;
|
|
if (vports == NULL)
|
|
return;
|
|
for (i=0; vports[i] != NULL && i <= phba->max_vpi; i++)
|
|
scsi_host_put(lpfc_shost_from_vport(vports[i]));
|
|
kfree(vports);
|
|
}
|