linux/drivers/bluetooth
Peng Chen 2096ae6ca6 Bluetooth: add support for atheros 0489:e057
Add support for the AR3012 chip found on Fioxconn.

    usb-devices shows:

    T:  Bus=06 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 44 Spd=12   MxCh= 0
    D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
    P:  Vendor=0489 ProdID=e057 Rev= 0.02
    C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
    I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
    E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
    E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
    I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
    I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
    I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
    I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
    I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
    I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Peng Chen <pengchen@qca.qualcomm.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06 15:33:05 -03:00
..
ath3k.c Bluetooth: add support for atheros 0489:e057 2012-08-06 15:33:05 -03:00
bcm203x.c USB: Disable hub-initiated LPM for comms devices. 2012-05-18 15:42:55 -07:00
bfusb.c USB: Disable hub-initiated LPM for comms devices. 2012-05-18 15:42:55 -07:00
bluecard_cs.c Bluetooth: bluecard_cs: Shorten scope for iobase 2012-06-30 12:33:06 -03:00
bpa10x.c Bluetooth: Rename HCI_QUIRK_NO_RESET to HCI_QUIRK_RESET_ON_CLOSE 2012-06-05 06:34:06 +03:00
bt3c_cs.c Bluetooth: Fix warning: using int as NULL pointer 2012-06-30 12:07:14 -03:00
btmrvl_debugfs.c simple_open: automatically convert to simple_open() 2012-04-05 15:25:50 -07:00
btmrvl_drv.h Bluetooth: btmrvl: Do not send vendor events to bluetooth stack 2012-06-19 00:19:11 -03:00
btmrvl_main.c Bluetooth: btmrvl: trivial style fixes 2012-07-09 09:45:10 -03:00
btmrvl_sdio.c Bluetooth: btmrvl: trivial style fixes 2012-07-09 09:45:10 -03:00
btmrvl_sdio.h
btsdio.c Bluetooth: Remove hci_dev->driver_data 2012-02-13 17:01:37 +02:00
btuart_cs.c Bluetooth: Fix warning: using int as NULL pointer 2012-06-30 12:07:14 -03:00
btusb.c Bluetooth: add support for atheros 0489:e057 2012-08-06 15:33:05 -03:00
btwilink.c Bluetooth: Remove hci_dev->driver_data 2012-02-13 17:01:37 +02:00
dtl1_cs.c Bluetooth: cleanup dtl1_config 2012-06-30 11:44:36 -03:00
hci_ath.c
hci_bcsp.c Bluetooth: Remove 'register' usage from the subsystem 2012-06-05 06:34:07 +03:00
hci_h4.c Bluetooth: Remove 'register' usage from the subsystem 2012-06-05 06:34:07 +03:00
hci_h5.c Bluetooth: Introduce a flags variable to Three-wire UART state 2012-07-17 14:49:24 -03:00
hci_ldisc.c Bluetooth: Add delayed init sequence support for UART controllers 2012-07-17 14:48:29 -03:00
hci_ll.c Bluetooth: Remove 'register' usage from the subsystem 2012-06-05 06:34:07 +03:00
hci_uart.h Bluetooth: Add delayed init sequence support for UART controllers 2012-07-17 14:48:29 -03:00
hci_vhci.c Bluetooth: vhci: Ignore return code of nonseekable_open() 2012-05-09 00:41:36 -03:00
Kconfig Bluetooth: Initial skeleton for Three-wire UART (H5) support 2012-07-17 14:33:20 -03:00
Makefile Bluetooth: Initial skeleton for Three-wire UART (H5) support 2012-07-17 14:33:20 -03:00