linux/drivers/net/wireless/rt2x00/rt2x00rfkill.c
Johannes Berg 4150c57212 [PATCH] mac80211: revamp interface and filter configuration
Drivers are currently supposed to keep track of monitor
interfaces if they allow so-called "hard" monitor, and
they are also supposed to keep track of multicast etc.

This patch changes that, replaces the set_multicast_list()
callback with a new configure_filter() callback that takes
filter flags (FIF_*) instead of interface flags (IFF_*).
For a driver, this means it should open the filter as much
as necessary to get all frames requested by the filter flags.
Accordingly, the filter flags are named "positively", e.g.
FIF_ALLMULTI.

Multicast filtering is a bit special in that drivers that
have no multicast address filters need to allow multicast
frames through when either the FIF_ALLMULTI flag is set or
when the mc_count value is positive.

At the same time, drivers are no longer notified about
monitor interfaces at all, this means they now need to
implement the start() and stop() callbacks and the new
change_filter_flags() callback. Also, the start()/stop()
ordering changed, start() is now called *before* any
add_interface() as it really should be, and stop() after
any remove_interface().

The patch also changes the behaviour of setting the bssid
to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING
is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed
and the filter flag FIF_BCN_PRBRESP_PROMISC introduced.
This is a lot more efficient for hardware like b43 that
supports it and other hardware can still set the BSSID
to all-ones.

Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu
(rtl8187, adm8211, and p54), Larry Finger (b43legacy), and
Ivo van Doorn (rt2x00).

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:52:57 -07:00

146 lines
3.9 KiB
C

/*
Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
<http://rt2x00.serialmonkey.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the
Free Software Foundation, Inc.,
59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
/*
Module: rt2x00rfkill
Abstract: rt2x00 rfkill routines.
*/
/*
* Set enviroment defines for rt2x00.h
*/
#define DRV_NAME "rt2x00lib"
#include <linux/input-polldev.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/rfkill.h>
#include "rt2x00.h"
#include "rt2x00lib.h"
static int rt2x00rfkill_toggle_radio(void *data, enum rfkill_state state)
{
struct rt2x00_dev *rt2x00dev = data;
int retval = 0;
if (unlikely(!rt2x00dev))
return 0;
/*
* Only continue if we have an active interface.
*/
if (!is_interface_present(&rt2x00dev->interface))
return 0;
if (state == RFKILL_STATE_ON) {
INFO(rt2x00dev, "Hardware button pressed, enabling radio.\n");
__set_bit(DEVICE_ENABLED_RADIO_HW, &rt2x00dev->flags);
retval = rt2x00lib_enable_radio(rt2x00dev);
} else if (state == RFKILL_STATE_OFF) {
INFO(rt2x00dev, "Hardware button pressed, disabling radio.\n");
__clear_bit(DEVICE_ENABLED_RADIO_HW, &rt2x00dev->flags);
rt2x00lib_disable_radio(rt2x00dev);
}
return retval;
}
static void rt2x00rfkill_poll(struct input_polled_dev *poll_dev)
{
struct rt2x00_dev *rt2x00dev = poll_dev->private;
int state = rt2x00dev->ops->lib->rfkill_poll(rt2x00dev);
if (rt2x00dev->rfkill->state != state)
input_report_key(poll_dev->input, KEY_WLAN, 1);
}
int rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev)
{
int retval;
if (!test_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
return 0;
retval = rfkill_register(rt2x00dev->rfkill);
if (retval) {
ERROR(rt2x00dev, "Failed to register rfkill handler.\n");
return retval;
}
retval = input_register_polled_device(rt2x00dev->poll_dev);
if (retval) {
ERROR(rt2x00dev, "Failed to register polled device.\n");
rfkill_unregister(rt2x00dev->rfkill);
return retval;
}
return 0;
}
void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev)
{
if (!test_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
return;
input_unregister_polled_device(rt2x00dev->poll_dev);
rfkill_unregister(rt2x00dev->rfkill);
}
int rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev)
{
struct device *device = wiphy_dev(rt2x00dev->hw->wiphy);
if (!test_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
return 0;
rt2x00dev->rfkill = rfkill_allocate(device, RFKILL_TYPE_WLAN);
if (!rt2x00dev->rfkill) {
ERROR(rt2x00dev, "Failed to allocate rfkill handler.\n");
return -ENOMEM;
}
rt2x00dev->rfkill->name = rt2x00dev->ops->name;
rt2x00dev->rfkill->data = rt2x00dev;
rt2x00dev->rfkill->state = rt2x00dev->ops->lib->rfkill_poll(rt2x00dev);
rt2x00dev->rfkill->toggle_radio = rt2x00rfkill_toggle_radio;
rt2x00dev->poll_dev = input_allocate_polled_device();
if (!rt2x00dev->poll_dev) {
ERROR(rt2x00dev, "Failed to allocate polled device.\n");
rfkill_free(rt2x00dev->rfkill);
return -ENOMEM;
}
rt2x00dev->poll_dev->private = rt2x00dev;
rt2x00dev->poll_dev->poll = rt2x00rfkill_poll;
rt2x00dev->poll_dev->poll_interval = RFKILL_POLL_INTERVAL;
return 0;
}
void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev)
{
if (!test_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
return;
input_free_polled_device(rt2x00dev->poll_dev);
rfkill_free(rt2x00dev->rfkill);
}