linux/drivers/pci/bus.c

249 lines
6.0 KiB
C

/*
* drivers/pci/bus.c
*
* From setup-res.c, by:
* Dave Rusling (david.rusling@reo.mts.dec.com)
* David Mosberger (davidm@cs.arizona.edu)
* David Miller (davem@redhat.com)
* Ivan Kokshaysky (ink@jurassic.park.msu.ru)
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/proc_fs.h>
#include <linux/init.h>
#include "pci.h"
/**
* pci_bus_alloc_resource - allocate a resource from a parent bus
* @bus: PCI bus
* @res: resource to allocate
* @size: size of resource to allocate
* @align: alignment of resource to allocate
* @min: minimum /proc/iomem address to allocate
* @type_mask: IORESOURCE_* type flags
* @alignf: resource alignment function
* @alignf_data: data argument for resource alignment function
*
* Given the PCI bus a device resides on, the size, minimum address,
* alignment and type, try to find an acceptable resource allocation
* for a specific device resource.
*/
int
pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res,
resource_size_t size, resource_size_t align,
resource_size_t min, unsigned int type_mask,
void (*alignf)(void *, struct resource *, resource_size_t,
resource_size_t),
void *alignf_data)
{
int i, ret = -ENOMEM;
resource_size_t max = -1;
type_mask |= IORESOURCE_IO | IORESOURCE_MEM;
/* don't allocate too high if the pref mem doesn't support 64bit*/
if (!(res->flags & IORESOURCE_MEM_64))
max = PCIBIOS_MAX_MEM_32;
for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
struct resource *r = bus->resource[i];
if (!r)
continue;
/* type_mask must match */
if ((res->flags ^ r->flags) & type_mask)
continue;
/* We cannot allocate a non-prefetching resource
from a pre-fetching area */
if ((r->flags & IORESOURCE_PREFETCH) &&
!(res->flags & IORESOURCE_PREFETCH))
continue;
/* Ok, try it out.. */
ret = allocate_resource(r, res, size,
r->start ? : min,
max, align,
alignf, alignf_data);
if (ret == 0)
break;
}
return ret;
}
/**
* pci_bus_add_device - add a single device
* @dev: device to add
*
* This adds a single pci device to the global
* device list and adds sysfs and procfs entries
*/
int pci_bus_add_device(struct pci_dev *dev)
{
int retval;
retval = device_add(&dev->dev);
if (retval)
return retval;
dev->is_added = 1;
pci_proc_attach_device(dev);
pci_create_sysfs_dev_files(dev);
return 0;
}
/**
* pci_bus_add_child - add a child bus
* @bus: bus to add
*
* This adds sysfs entries for a single bus
*/
int pci_bus_add_child(struct pci_bus *bus)
{
int retval;
if (bus->bridge)
bus->dev.parent = bus->bridge;
retval = device_register(&bus->dev);
if (retval)
return retval;
bus->is_added = 1;
retval = device_create_file(&bus->dev, &dev_attr_cpuaffinity);
if (retval)
return retval;
retval = device_create_file(&bus->dev, &dev_attr_cpulistaffinity);
/* Create legacy_io and legacy_mem files for this bus */
pci_create_legacy_files(bus);
return retval;
}
/**
* pci_bus_add_devices - insert newly discovered PCI devices
* @bus: bus to check for new devices
*
* Add newly discovered PCI devices (which are on the bus->devices
* list) to the global PCI device list, add the sysfs and procfs
* entries. Where a bridge is found, add the discovered bus to
* the parents list of child buses, and recurse (breadth-first
* to be compatible with 2.4)
*
* Call hotplug for each new devices.
*/
void pci_bus_add_devices(const struct pci_bus *bus)
{
struct pci_dev *dev;
struct pci_bus *child;
int retval;
list_for_each_entry(dev, &bus->devices, bus_list) {
/* Skip already-added devices */
if (dev->is_added)
continue;
retval = pci_bus_add_device(dev);
if (retval)
dev_err(&dev->dev, "Error adding device, continuing\n");
}
list_for_each_entry(dev, &bus->devices, bus_list) {
BUG_ON(!dev->is_added);
child = dev->subordinate;
/*
* If there is an unattached subordinate bus, attach
* it and then scan for unattached PCI devices.
*/
if (!child)
continue;
if (list_empty(&child->node)) {
down_write(&pci_bus_sem);
list_add_tail(&child->node, &dev->bus->children);
up_write(&pci_bus_sem);
}
pci_bus_add_devices(child);
/*
* register the bus with sysfs as the parent is now
* properly registered.
*/
if (child->is_added)
continue;
retval = pci_bus_add_child(child);
if (retval)
dev_err(&dev->dev, "Error adding bus, continuing\n");
}
}
void pci_enable_bridges(struct pci_bus *bus)
{
struct pci_dev *dev;
int retval;
list_for_each_entry(dev, &bus->devices, bus_list) {
if (dev->subordinate) {
if (!pci_is_enabled(dev)) {
retval = pci_enable_device(dev);
pci_set_master(dev);
}
pci_enable_bridges(dev->subordinate);
}
}
}
/** pci_walk_bus - walk devices on/under bus, calling callback.
* @top bus whose devices should be walked
* @cb callback to be called for each device found
* @userdata arbitrary pointer to be passed to callback.
*
* Walk the given bus, including any bridged devices
* on buses under this bus. Call the provided callback
* on each device found.
*/
void pci_walk_bus(struct pci_bus *top, void (*cb)(struct pci_dev *, void *),
void *userdata)
{
struct pci_dev *dev;
struct pci_bus *bus;
struct list_head *next;
bus = top;
down_read(&pci_bus_sem);
next = top->devices.next;
for (;;) {
if (next == &bus->devices) {
/* end of this bus, go up or finish */
if (bus == top)
break;
next = bus->self->bus_list.next;
bus = bus->self->bus;
continue;
}
dev = list_entry(next, struct pci_dev, bus_list);
if (dev->subordinate) {
/* this is a pci-pci bridge, do its devices next */
next = dev->subordinate->devices.next;
bus = dev->subordinate;
} else
next = dev->bus_list.next;
/* Run device routines with the device locked */
down(&dev->dev.sem);
cb(dev, userdata);
up(&dev->dev.sem);
}
up_read(&pci_bus_sem);
}
EXPORT_SYMBOL(pci_bus_alloc_resource);
EXPORT_SYMBOL_GPL(pci_bus_add_device);
EXPORT_SYMBOL(pci_bus_add_devices);
EXPORT_SYMBOL(pci_enable_bridges);