linux/arch/blackfin/kernel/cplb-nompu/cplbinit.c
Mike Frysinger a797a0e242 Blackfin: NOMPU: skip DMA ICPLB hole when it is redundant
Normally there is no user-reserved memory after the DMA region which means
there is no user-reserved ICPLB coverage.  So the DMA hole can be covered
by the large hole that is always added to cover up to the async bank.  We
only need an explicit DMA whole when we also add an explicit mapping for
the user-reserved memory.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:54 -05:00

185 lines
5.3 KiB
C

/*
* Blackfin CPLB initialization
*
* Copyright 2007-2009 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <linux/module.h>
#include <asm/blackfin.h>
#include <asm/cacheflush.h>
#include <asm/cplb.h>
#include <asm/cplbinit.h>
#include <asm/mem_map.h>
struct cplb_entry icplb_tbl[NR_CPUS][MAX_CPLBS] PDT_ATTR;
struct cplb_entry dcplb_tbl[NR_CPUS][MAX_CPLBS] PDT_ATTR;
int first_switched_icplb PDT_ATTR;
int first_switched_dcplb PDT_ATTR;
struct cplb_boundary dcplb_bounds[9] PDT_ATTR;
struct cplb_boundary icplb_bounds[9] PDT_ATTR;
int icplb_nr_bounds PDT_ATTR;
int dcplb_nr_bounds PDT_ATTR;
void __init generate_cplb_tables_cpu(unsigned int cpu)
{
int i_d, i_i;
unsigned long addr;
struct cplb_entry *d_tbl = dcplb_tbl[cpu];
struct cplb_entry *i_tbl = icplb_tbl[cpu];
printk(KERN_INFO "NOMPU: setting up cplb tables\n");
i_d = i_i = 0;
#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
/* Set up the zero page. */
d_tbl[i_d].addr = 0;
d_tbl[i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
i_tbl[i_i].addr = 0;
i_tbl[i_i++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
#endif
/* Cover kernel memory with 4M pages. */
addr = 0;
for (; addr < memory_start; addr += 4 * 1024 * 1024) {
d_tbl[i_d].addr = addr;
d_tbl[i_d++].data = SDRAM_DGENERIC | PAGE_SIZE_4MB;
i_tbl[i_i].addr = addr;
i_tbl[i_i++].data = SDRAM_IGENERIC | PAGE_SIZE_4MB;
}
/* Cover L1 memory. One 4M area for code and data each is enough. */
if (cpu == 0) {
if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) {
d_tbl[i_d].addr = L1_DATA_A_START;
d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
}
i_tbl[i_i].addr = L1_CODE_START;
i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
}
#ifdef CONFIG_SMP
else {
if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) {
d_tbl[i_d].addr = COREB_L1_DATA_A_START;
d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
}
i_tbl[i_i].addr = COREB_L1_CODE_START;
i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
}
#endif
first_switched_dcplb = i_d;
first_switched_icplb = i_i;
BUG_ON(first_switched_dcplb > MAX_CPLBS);
BUG_ON(first_switched_icplb > MAX_CPLBS);
while (i_d < MAX_CPLBS)
d_tbl[i_d++].data = 0;
while (i_i < MAX_CPLBS)
i_tbl[i_i++].data = 0;
}
void __init generate_cplb_tables_all(void)
{
unsigned long uncached_end;
int i_d, i_i;
i_d = 0;
/* Normal RAM, including MTD FS. */
#ifdef CONFIG_MTD_UCLINUX
uncached_end = memory_mtd_start + mtd_size;
#else
uncached_end = memory_end;
#endif
/*
* if DMA uncached is less than 1MB, mark the 1MB chunk as uncached
* so that we don't have to use 4kB pages and cause CPLB thrashing
*/
if ((DMA_UNCACHED_REGION >= 1 * 1024 * 1024) || !DMA_UNCACHED_REGION ||
((_ramend - uncached_end) >= 1 * 1024 * 1024))
dcplb_bounds[i_d].eaddr = uncached_end;
else
dcplb_bounds[i_d].eaddr = uncached_end & ~(1 * 1024 * 1024);
dcplb_bounds[i_d++].data = SDRAM_DGENERIC;
/* DMA uncached region. */
if (DMA_UNCACHED_REGION) {
dcplb_bounds[i_d].eaddr = _ramend;
dcplb_bounds[i_d++].data = SDRAM_DNON_CHBL;
}
if (_ramend != physical_mem_end) {
/* Reserved memory. */
dcplb_bounds[i_d].eaddr = physical_mem_end;
dcplb_bounds[i_d++].data = (reserved_mem_dcache_on ?
SDRAM_DGENERIC : SDRAM_DNON_CHBL);
}
/* Addressing hole up to the async bank. */
dcplb_bounds[i_d].eaddr = ASYNC_BANK0_BASE;
dcplb_bounds[i_d++].data = 0;
/* ASYNC banks. */
dcplb_bounds[i_d].eaddr = ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE;
dcplb_bounds[i_d++].data = SDRAM_EBIU;
/* Addressing hole up to BootROM. */
dcplb_bounds[i_d].eaddr = BOOT_ROM_START;
dcplb_bounds[i_d++].data = 0;
/* BootROM -- largest one should be less than 1 meg. */
dcplb_bounds[i_d].eaddr = BOOT_ROM_START + (1 * 1024 * 1024);
dcplb_bounds[i_d++].data = SDRAM_DGENERIC;
if (L2_LENGTH) {
/* Addressing hole up to L2 SRAM. */
dcplb_bounds[i_d].eaddr = L2_START;
dcplb_bounds[i_d++].data = 0;
/* L2 SRAM. */
dcplb_bounds[i_d].eaddr = L2_START + L2_LENGTH;
dcplb_bounds[i_d++].data = L2_DMEMORY;
}
dcplb_nr_bounds = i_d;
BUG_ON(dcplb_nr_bounds > ARRAY_SIZE(dcplb_bounds));
i_i = 0;
/* Normal RAM, including MTD FS. */
icplb_bounds[i_i].eaddr = uncached_end;
icplb_bounds[i_i++].data = SDRAM_IGENERIC;
if (_ramend != physical_mem_end) {
/* DMA uncached region. */
if (DMA_UNCACHED_REGION) {
/* Normally this hole is caught by the async below. */
icplb_bounds[i_i].eaddr = _ramend;
icplb_bounds[i_i++].data = 0;
}
/* Reserved memory. */
icplb_bounds[i_i].eaddr = physical_mem_end;
icplb_bounds[i_i++].data = (reserved_mem_icache_on ?
SDRAM_IGENERIC : SDRAM_INON_CHBL);
}
/* Addressing hole up to the async bank. */
icplb_bounds[i_i].eaddr = ASYNC_BANK0_BASE;
icplb_bounds[i_i++].data = 0;
/* ASYNC banks. */
icplb_bounds[i_i].eaddr = ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE;
icplb_bounds[i_i++].data = SDRAM_EBIU;
/* Addressing hole up to BootROM. */
icplb_bounds[i_i].eaddr = BOOT_ROM_START;
icplb_bounds[i_i++].data = 0;
/* BootROM -- largest one should be less than 1 meg. */
icplb_bounds[i_i].eaddr = BOOT_ROM_START + (1 * 1024 * 1024);
icplb_bounds[i_i++].data = SDRAM_IGENERIC;
if (L2_LENGTH) {
/* Addressing hole up to L2 SRAM. */
icplb_bounds[i_i].eaddr = L2_START;
icplb_bounds[i_i++].data = 0;
/* L2 SRAM. */
icplb_bounds[i_i].eaddr = L2_START + L2_LENGTH;
icplb_bounds[i_i++].data = L2_IMEMORY;
}
icplb_nr_bounds = i_i;
BUG_ON(icplb_nr_bounds > ARRAY_SIZE(icplb_bounds));
}