02a00cf672
Implement Standby support. In this mode, we'll suspend all drivers,
put the SDRAM in self-refresh mode and switch off the HSB bus
("frozen" mode.)
Implement Suspend-to-mem support. In this mode, we suspend all
drivers, put the SDRAM into self-refresh mode and switch off all
internal clocks except the 32 kHz oscillator ("stop" mode.)
The lowest-level suspend code runs from a small portion of SRAM
allocated at startup time. This gets rid of a small potential race
with the SDRAM where we might try to enter self-refresh mode in the
middle of an icache burst. We also relocate all interrupt and
exception handlers to SRAM during the small window when we enter and
exit the low-power modes.
We don't need to do any special tricks to start and stop the PLL. The
main clock is automatically gated by hardware until the PLL is stable.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
174 lines
4.8 KiB
ArmAsm
174 lines
4.8 KiB
ArmAsm
/*
|
|
* Low-level Power Management code.
|
|
*
|
|
* Copyright (C) 2008 Atmel Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#include <asm/asm.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/thread_info.h>
|
|
#include <asm/arch/pm.h>
|
|
|
|
#include "pm.h"
|
|
#include "sdramc.h"
|
|
|
|
/* Same as 0xfff00000 but fits in a 21 bit signed immediate */
|
|
#define PM_BASE -0x100000
|
|
|
|
.section .bss, "wa", @nobits
|
|
.global disable_idle_sleep
|
|
.type disable_idle_sleep, @object
|
|
disable_idle_sleep:
|
|
.int 4
|
|
.size disable_idle_sleep, . - disable_idle_sleep
|
|
|
|
/* Keep this close to the irq handlers */
|
|
.section .irq.text, "ax", @progbits
|
|
|
|
/*
|
|
* void cpu_enter_idle(void)
|
|
*
|
|
* Put the CPU into "idle" mode, in which it will consume
|
|
* significantly less power.
|
|
*
|
|
* If an interrupt comes along in the window between
|
|
* unmask_interrupts and the sleep instruction below, the
|
|
* interrupt code will adjust the return address so that we
|
|
* never execute the sleep instruction. This is required
|
|
* because the AP7000 doesn't unmask interrupts when entering
|
|
* sleep modes; later CPUs may not need this workaround.
|
|
*/
|
|
.global cpu_enter_idle
|
|
.type cpu_enter_idle, @function
|
|
cpu_enter_idle:
|
|
mask_interrupts
|
|
get_thread_info r8
|
|
ld.w r9, r8[TI_flags]
|
|
bld r9, TIF_NEED_RESCHED
|
|
brcs .Lret_from_sleep
|
|
sbr r9, TIF_CPU_GOING_TO_SLEEP
|
|
st.w r8[TI_flags], r9
|
|
unmask_interrupts
|
|
sleep CPU_SLEEP_IDLE
|
|
.size cpu_idle_sleep, . - cpu_idle_sleep
|
|
|
|
/*
|
|
* Common return path for PM functions that don't run from
|
|
* SRAM.
|
|
*/
|
|
.global cpu_idle_skip_sleep
|
|
.type cpu_idle_skip_sleep, @function
|
|
cpu_idle_skip_sleep:
|
|
mask_interrupts
|
|
ld.w r9, r8[TI_flags]
|
|
cbr r9, TIF_CPU_GOING_TO_SLEEP
|
|
st.w r8[TI_flags], r9
|
|
.Lret_from_sleep:
|
|
unmask_interrupts
|
|
retal r12
|
|
.size cpu_idle_skip_sleep, . - cpu_idle_skip_sleep
|
|
|
|
#ifdef CONFIG_PM
|
|
.section .init.text, "ax", @progbits
|
|
|
|
.global pm_exception
|
|
.type pm_exception, @function
|
|
pm_exception:
|
|
/*
|
|
* Exceptions are masked when we switch to this handler, so
|
|
* we'll only get "unrecoverable" exceptions (offset 0.)
|
|
*/
|
|
sub r12, pc, . - .Lpanic_msg
|
|
lddpc pc, .Lpanic_addr
|
|
|
|
.align 2
|
|
.Lpanic_addr:
|
|
.long panic
|
|
.Lpanic_msg:
|
|
.asciz "Unrecoverable exception during suspend\n"
|
|
.size pm_exception, . - pm_exception
|
|
|
|
.global pm_irq0
|
|
.type pm_irq0, @function
|
|
pm_irq0:
|
|
/* Disable interrupts and return after the sleep instruction */
|
|
mfsr r9, SYSREG_RSR_INT0
|
|
mtsr SYSREG_RAR_INT0, r8
|
|
sbr r9, SYSREG_GM_OFFSET
|
|
mtsr SYSREG_RSR_INT0, r9
|
|
rete
|
|
|
|
/*
|
|
* void cpu_enter_standby(unsigned long sdramc_base)
|
|
*
|
|
* Enter PM_SUSPEND_STANDBY mode. At this point, all drivers
|
|
* are suspended and interrupts are disabled. Interrupts
|
|
* marked as 'wakeup' event sources may still come along and
|
|
* get us out of here.
|
|
*
|
|
* The SDRAM will be put into self-refresh mode (which does
|
|
* not require a clock from the CPU), and the CPU will be put
|
|
* into "frozen" mode (HSB bus stopped). The SDRAM controller
|
|
* will automatically bring the SDRAM into normal mode on the
|
|
* first access, and the power manager will automatically
|
|
* start the HSB and CPU clocks upon a wakeup event.
|
|
*
|
|
* This code uses the same "skip sleep" technique as above.
|
|
* It is very important that we jump directly to
|
|
* cpu_after_sleep after the sleep instruction since that's
|
|
* where we'll end up if the interrupt handler decides that we
|
|
* need to skip the sleep instruction.
|
|
*/
|
|
.global pm_standby
|
|
.type pm_standby, @function
|
|
pm_standby:
|
|
/*
|
|
* interrupts are already masked at this point, and EVBA
|
|
* points to pm_exception above.
|
|
*/
|
|
ld.w r10, r12[SDRAMC_LPR]
|
|
sub r8, pc, . - 1f /* return address for irq handler */
|
|
mov r11, SDRAMC_LPR_LPCB_SELF_RFR
|
|
bfins r10, r11, 0, 2 /* LPCB <- self Refresh */
|
|
sync 0 /* flush write buffer */
|
|
st.w r12[SDRAMC_LPR], r11 /* put SDRAM in self-refresh mode */
|
|
ld.w r11, r12[SDRAMC_LPR]
|
|
unmask_interrupts
|
|
sleep CPU_SLEEP_FROZEN
|
|
1: mask_interrupts
|
|
retal r12
|
|
.size pm_standby, . - pm_standby
|
|
|
|
.global pm_suspend_to_ram
|
|
.type pm_suspend_to_ram, @function
|
|
pm_suspend_to_ram:
|
|
/*
|
|
* interrupts are already masked at this point, and EVBA
|
|
* points to pm_exception above.
|
|
*/
|
|
mov r11, 0
|
|
cache r11[2], 8 /* clean all dcache lines */
|
|
sync 0 /* flush write buffer */
|
|
ld.w r10, r12[SDRAMC_LPR]
|
|
sub r8, pc, . - 1f /* return address for irq handler */
|
|
mov r11, SDRAMC_LPR_LPCB_SELF_RFR
|
|
bfins r10, r11, 0, 2 /* LPCB <- self refresh */
|
|
st.w r12[SDRAMC_LPR], r10 /* put SDRAM in self-refresh mode */
|
|
ld.w r11, r12[SDRAMC_LPR]
|
|
|
|
unmask_interrupts
|
|
sleep CPU_SLEEP_STOP
|
|
1: mask_interrupts
|
|
|
|
retal r12
|
|
.size pm_suspend_to_ram, . - pm_suspend_to_ram
|
|
|
|
.global pm_sram_end
|
|
.type pm_sram_end, @function
|
|
pm_sram_end:
|
|
.size pm_sram_end, 0
|
|
|
|
#endif /* CONFIG_PM */
|