linux/drivers/scsi/qla2xxx/Kconfig
Nicholas Bellinger 75f8c1f693 [SCSI] tcm_qla2xxx: Add >= 24xx series fabric module for target-core
This patch adds support for tcm_qla2xxx fabric module for target-core
using the new qla_target.c LLD logic.  This includes support for explict
NodeACLs via configfs using tcm_qla2xxx_setup_nacl_from_rport() from libfc
struct fc_host->rports, and demo-mode support for virtual LUN=0 access.

This patch also adds support for using tcm_qla2xxx_lport->lport_fcport_map
and ->lport_loopid_map of btree_head32 to track struct se_node_acl pointers
for individual 24-bit Port ID and 16-bit Loop ID values w/ qla_target_template
->find_sess_by_s_id() and ->find_sess_by_loop_id() used in a number of
locations into the primary I/O dispatch logic in qla_target.c LLD code.

The main piece for FC Nexus setup is in tcm_qla2xxx_check_initiator_node_acl(),
which calls tcm_qla2xxx_set_sess_by_[s_id,loop_id]() to setup our
lport->lport_fcport_map and lport_loopid_map pointers respectively, and
register the new nexus with TCM via __transport_register_session().

(nab: Add qla_tgt_mgmt_cmd usage with TARGET_SCF_ACK_KREF during TMRs +
      change tcm_qla2xxx_nacl->nport_id to u32 (DanC))
(danc: tcm_qla2xxx: checking for NULL instead of IS_ERR())
(roland: Fix up v3.5 breakage for removal of transport_do_task_sg_chain +
         Add hook so qla_target code can shutdown sessions)
(steveh: Convert FC address map from flat array to btree)
(randy: fix qla2xxx printk format warnings for size_t)
(joern: Make most of tcm_qla2xxx static + remove unnecessary
        workqueue_struct prototypes + use WWN_SIZE instead of hard-coded
        constants)

Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-22 11:49:20 +01:00

36 lines
1 KiB
Text

config SCSI_QLA_FC
tristate "QLogic QLA2XXX Fibre Channel Support"
depends on PCI && SCSI
select SCSI_FC_ATTRS
select FW_LOADER
---help---
This qla2xxx driver supports all QLogic Fibre Channel
PCI and PCIe host adapters.
By default, firmware for the ISP parts will be loaded
via the Firmware Loader interface.
ISP Firmware Filename
---------- -----------------
21xx ql2100_fw.bin
22xx ql2200_fw.bin
2300, 2312, 6312 ql2300_fw.bin
2322, 6322 ql2322_fw.bin
24xx, 54xx ql2400_fw.bin
25xx ql2500_fw.bin
Upon request, the driver caches the firmware image until
the driver is unloaded.
Firmware images can be retrieved from:
ftp://ftp.qlogic.com/outgoing/linux/firmware/
config TCM_QLA2XXX
tristate "TCM_QLA2XXX fabric module for Qlogic 2xxx series target mode HBAs"
depends on SCSI_QLA_FC && TARGET_CORE
select LIBFC
select BTREE
default n
---help---
Say Y here to enable the TCM_QLA2XXX fabric module for Qlogic 2xxx series target mode HBAs