54d5d42404
When handling writes to /proc/irq, current code is re-programming rte entries directly. This is not recommended and could potentially cause chipset's to lockup, or cause missing interrupts. CONFIG_IRQ_BALANCE does this correctly, where it re-programs only when the interrupt is pending. The same needs to be done for /proc/irq handling as well. Otherwise user space irq balancers are really not doing the right thing. - Changed pending_irq_balance_cpumask to pending_irq_migrate_cpumask for lack of a generic name. - added move_irq out of IRQ_BALANCE, and added this same to X86_64 - Added new proc handler for write, so we can do deferred write at irq handling time. - Display of /proc/irq/XX/smp_affinity used to display CPU_MASKALL, instead it now shows only active cpu masks, or exactly what was set. - Provided a common move_irq implementation, instead of duplicating when using generic irq framework. Tested on i386/x86_64 and ia64 with CONFIG_PCI_MSI turned on and off. Tested UP builds as well. MSI testing: tbd: I have cards, need to look for a x-over cable, although I did test an earlier version of this patch. Will test in a couple days. Signed-off-by: Ashok Raj <ashok.raj@intel.com> Acked-by: Zwane Mwaikambo <zwane@holomorphy.com> Grudgingly-acked-by: Andi Kleen <ak@muc.de> Signed-off-by: Coywolf Qi Hunt <coywolf@lovecn.org> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
153 lines
5 KiB
C
153 lines
5 KiB
C
/*
|
|
* Copyright (C) 2003-2004 Intel
|
|
* Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com)
|
|
*/
|
|
|
|
#ifndef MSI_H
|
|
#define MSI_H
|
|
|
|
#include <asm/msi.h>
|
|
|
|
/*
|
|
* Assume the maximum number of hot plug slots supported by the system is about
|
|
* ten. The worstcase is that each of these slots is hot-added with a device,
|
|
* which has two MSI/MSI-X capable functions. To avoid any MSI-X driver, which
|
|
* attempts to request all available vectors, NR_HP_RESERVED_VECTORS is defined
|
|
* as below to ensure at least one message is assigned to each detected MSI/
|
|
* MSI-X device function.
|
|
*/
|
|
#define NR_HP_RESERVED_VECTORS 20
|
|
|
|
extern int vector_irq[NR_VECTORS];
|
|
extern void (*interrupt[NR_IRQS])(void);
|
|
extern int pci_vector_resources(int last, int nr_released);
|
|
|
|
#ifdef CONFIG_SMP
|
|
#define set_msi_irq_affinity set_msi_affinity
|
|
#else
|
|
#define set_msi_irq_affinity NULL
|
|
#endif
|
|
|
|
/*
|
|
* MSI-X Address Register
|
|
*/
|
|
#define PCI_MSIX_FLAGS_QSIZE 0x7FF
|
|
#define PCI_MSIX_FLAGS_ENABLE (1 << 15)
|
|
#define PCI_MSIX_FLAGS_BIRMASK (7 << 0)
|
|
#define PCI_MSIX_FLAGS_BITMASK (1 << 0)
|
|
|
|
#define PCI_MSIX_ENTRY_SIZE 16
|
|
#define PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET 0
|
|
#define PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET 4
|
|
#define PCI_MSIX_ENTRY_DATA_OFFSET 8
|
|
#define PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET 12
|
|
|
|
#define msi_control_reg(base) (base + PCI_MSI_FLAGS)
|
|
#define msi_lower_address_reg(base) (base + PCI_MSI_ADDRESS_LO)
|
|
#define msi_upper_address_reg(base) (base + PCI_MSI_ADDRESS_HI)
|
|
#define msi_data_reg(base, is64bit) \
|
|
( (is64bit == 1) ? base+PCI_MSI_DATA_64 : base+PCI_MSI_DATA_32 )
|
|
#define msi_mask_bits_reg(base, is64bit) \
|
|
( (is64bit == 1) ? base+PCI_MSI_MASK_BIT : base+PCI_MSI_MASK_BIT-4)
|
|
#define msi_disable(control) control &= ~PCI_MSI_FLAGS_ENABLE
|
|
#define multi_msi_capable(control) \
|
|
(1 << ((control & PCI_MSI_FLAGS_QMASK) >> 1))
|
|
#define multi_msi_enable(control, num) \
|
|
control |= (((num >> 1) << 4) & PCI_MSI_FLAGS_QSIZE);
|
|
#define is_64bit_address(control) (control & PCI_MSI_FLAGS_64BIT)
|
|
#define is_mask_bit_support(control) (control & PCI_MSI_FLAGS_MASKBIT)
|
|
#define msi_enable(control, num) multi_msi_enable(control, num); \
|
|
control |= PCI_MSI_FLAGS_ENABLE
|
|
|
|
#define msix_table_offset_reg(base) (base + 0x04)
|
|
#define msix_pba_offset_reg(base) (base + 0x08)
|
|
#define msix_enable(control) control |= PCI_MSIX_FLAGS_ENABLE
|
|
#define msix_disable(control) control &= ~PCI_MSIX_FLAGS_ENABLE
|
|
#define msix_table_size(control) ((control & PCI_MSIX_FLAGS_QSIZE)+1)
|
|
#define multi_msix_capable msix_table_size
|
|
#define msix_unmask(address) (address & ~PCI_MSIX_FLAGS_BITMASK)
|
|
#define msix_mask(address) (address | PCI_MSIX_FLAGS_BITMASK)
|
|
#define msix_is_pending(address) (address & PCI_MSIX_FLAGS_PENDMASK)
|
|
|
|
/*
|
|
* MSI Defined Data Structures
|
|
*/
|
|
#define MSI_ADDRESS_HEADER 0xfee
|
|
#define MSI_ADDRESS_HEADER_SHIFT 12
|
|
#define MSI_ADDRESS_HEADER_MASK 0xfff000
|
|
#define MSI_ADDRESS_DEST_ID_MASK 0xfff0000f
|
|
#define MSI_TARGET_CPU_MASK 0xff
|
|
#define MSI_DELIVERY_MODE 0
|
|
#define MSI_LEVEL_MODE 1 /* Edge always assert */
|
|
#define MSI_TRIGGER_MODE 0 /* MSI is edge sensitive */
|
|
#define MSI_PHYSICAL_MODE 0
|
|
#define MSI_LOGICAL_MODE 1
|
|
#define MSI_REDIRECTION_HINT_MODE 0
|
|
|
|
struct msg_data {
|
|
#if defined(__LITTLE_ENDIAN_BITFIELD)
|
|
__u32 vector : 8;
|
|
__u32 delivery_mode : 3; /* 000b: FIXED | 001b: lowest prior */
|
|
__u32 reserved_1 : 3;
|
|
__u32 level : 1; /* 0: deassert | 1: assert */
|
|
__u32 trigger : 1; /* 0: edge | 1: level */
|
|
__u32 reserved_2 : 16;
|
|
#elif defined(__BIG_ENDIAN_BITFIELD)
|
|
__u32 reserved_2 : 16;
|
|
__u32 trigger : 1; /* 0: edge | 1: level */
|
|
__u32 level : 1; /* 0: deassert | 1: assert */
|
|
__u32 reserved_1 : 3;
|
|
__u32 delivery_mode : 3; /* 000b: FIXED | 001b: lowest prior */
|
|
__u32 vector : 8;
|
|
#else
|
|
#error "Bitfield endianness not defined! Check your byteorder.h"
|
|
#endif
|
|
} __attribute__ ((packed));
|
|
|
|
struct msg_address {
|
|
union {
|
|
struct {
|
|
#if defined(__LITTLE_ENDIAN_BITFIELD)
|
|
__u32 reserved_1 : 2;
|
|
__u32 dest_mode : 1; /*0:physic | 1:logic */
|
|
__u32 redirection_hint: 1; /*0: dedicated CPU
|
|
1: lowest priority */
|
|
__u32 reserved_2 : 4;
|
|
__u32 dest_id : 24; /* Destination ID */
|
|
#elif defined(__BIG_ENDIAN_BITFIELD)
|
|
__u32 dest_id : 24; /* Destination ID */
|
|
__u32 reserved_2 : 4;
|
|
__u32 redirection_hint: 1; /*0: dedicated CPU
|
|
1: lowest priority */
|
|
__u32 dest_mode : 1; /*0:physic | 1:logic */
|
|
__u32 reserved_1 : 2;
|
|
#else
|
|
#error "Bitfield endianness not defined! Check your byteorder.h"
|
|
#endif
|
|
}u;
|
|
__u32 value;
|
|
}lo_address;
|
|
__u32 hi_address;
|
|
} __attribute__ ((packed));
|
|
|
|
struct msi_desc {
|
|
struct {
|
|
__u8 type : 5; /* {0: unused, 5h:MSI, 11h:MSI-X} */
|
|
__u8 maskbit : 1; /* mask-pending bit supported ? */
|
|
__u8 state : 1; /* {0: free, 1: busy} */
|
|
__u8 reserved: 1; /* reserved */
|
|
__u8 entry_nr; /* specific enabled entry */
|
|
__u8 default_vector; /* default pre-assigned vector */
|
|
__u8 current_cpu; /* current destination cpu */
|
|
}msi_attrib;
|
|
|
|
struct {
|
|
__u16 head;
|
|
__u16 tail;
|
|
}link;
|
|
|
|
void __iomem *mask_base;
|
|
struct pci_dev *dev;
|
|
};
|
|
|
|
#endif /* MSI_H */
|