ef33417dc9
drivers/net/wireless/iwlegacy/built-in.o:(.rodata+0x29f0): multiple definition of `iwl_rates' drivers/net/wireless/iwlwifi/built-in.o:(.rodata+0xa68): first defined here powerpc64-linux-ld: Warning: size of symbol `iwl_rates' changed from 143 in drivers/net/wireless/iwlwifi/built-in.o to 130 in drivers/net/wireless/iwlegacy/built-in.o drivers/net/wireless/iwlegacy/built-in.o:(.data+0x0): multiple definition of `bt_coex_active' drivers/net/wireless/iwlwifi/built-in.o:(.data+0x668): first defined here drivers/net/wireless/iwlegacy/built-in.o:(.rodata+0x750): multiple definition of `iwl_eeprom_band_1' drivers/net/wireless/iwlwifi/built-in.o:(.rodata+0x27d0): first defined here drivers/net/wireless/iwlegacy/built-in.o:(.rodata+0x3f0): multiple definition of `iwl_bcast_addr' drivers/net/wireless/iwlwifi/built-in.o:(.rodata+0x24f8): first defined here drivers/net/wireless/iwlegacy/built-in.o:(.bss+0x3d48): multiple definition of `iwl_debug_level' drivers/net/wireless/iwlwifi/built-in.o:(.bss+0x21950): first defined here Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: John W. Linville <linville@tuxdriver.com>
344 lines
14 KiB
C
344 lines
14 KiB
C
/******************************************************************************
|
|
*
|
|
* This file is provided under a dual BSD/GPLv2 license. When using or
|
|
* redistributing this file, you may do so under either license.
|
|
*
|
|
* GPL LICENSE SUMMARY
|
|
*
|
|
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
|
|
* USA
|
|
*
|
|
* The full GNU General Public License is included in this distribution
|
|
* in the file called LICENSE.GPL.
|
|
*
|
|
* Contact Information:
|
|
* Intel Linux Wireless <ilw@linux.intel.com>
|
|
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
|
|
*
|
|
* BSD LICENSE
|
|
*
|
|
* Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* * Neither the name Intel Corporation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*****************************************************************************/
|
|
|
|
#ifndef __iwl_legacy_eeprom_h__
|
|
#define __iwl_legacy_eeprom_h__
|
|
|
|
#include <net/mac80211.h>
|
|
|
|
struct iwl_priv;
|
|
|
|
/*
|
|
* EEPROM access time values:
|
|
*
|
|
* Driver initiates EEPROM read by writing byte address << 1 to CSR_EEPROM_REG.
|
|
* Driver then polls CSR_EEPROM_REG for CSR_EEPROM_REG_READ_VALID_MSK (0x1).
|
|
* When polling, wait 10 uSec between polling loops, up to a maximum 5000 uSec.
|
|
* Driver reads 16-bit value from bits 31-16 of CSR_EEPROM_REG.
|
|
*/
|
|
#define IWL_EEPROM_ACCESS_TIMEOUT 5000 /* uSec */
|
|
|
|
#define IWL_EEPROM_SEM_TIMEOUT 10 /* microseconds */
|
|
#define IWL_EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */
|
|
|
|
|
|
/*
|
|
* Regulatory channel usage flags in EEPROM struct iwl4965_eeprom_channel.flags.
|
|
*
|
|
* IBSS and/or AP operation is allowed *only* on those channels with
|
|
* (VALID && IBSS && ACTIVE && !RADAR). This restriction is in place because
|
|
* RADAR detection is not supported by the 4965 driver, but is a
|
|
* requirement for establishing a new network for legal operation on channels
|
|
* requiring RADAR detection or restricting ACTIVE scanning.
|
|
*
|
|
* NOTE: "WIDE" flag does not indicate anything about "HT40" 40 MHz channels.
|
|
* It only indicates that 20 MHz channel use is supported; HT40 channel
|
|
* usage is indicated by a separate set of regulatory flags for each
|
|
* HT40 channel pair.
|
|
*
|
|
* NOTE: Using a channel inappropriately will result in a uCode error!
|
|
*/
|
|
#define IWL_NUM_TX_CALIB_GROUPS 5
|
|
enum {
|
|
EEPROM_CHANNEL_VALID = (1 << 0), /* usable for this SKU/geo */
|
|
EEPROM_CHANNEL_IBSS = (1 << 1), /* usable as an IBSS channel */
|
|
/* Bit 2 Reserved */
|
|
EEPROM_CHANNEL_ACTIVE = (1 << 3), /* active scanning allowed */
|
|
EEPROM_CHANNEL_RADAR = (1 << 4), /* radar detection required */
|
|
EEPROM_CHANNEL_WIDE = (1 << 5), /* 20 MHz channel okay */
|
|
/* Bit 6 Reserved (was Narrow Channel) */
|
|
EEPROM_CHANNEL_DFS = (1 << 7), /* dynamic freq selection candidate */
|
|
};
|
|
|
|
/* SKU Capabilities */
|
|
/* 3945 only */
|
|
#define EEPROM_SKU_CAP_SW_RF_KILL_ENABLE (1 << 0)
|
|
#define EEPROM_SKU_CAP_HW_RF_KILL_ENABLE (1 << 1)
|
|
|
|
/* *regulatory* channel data format in eeprom, one for each channel.
|
|
* There are separate entries for HT40 (40 MHz) vs. normal (20 MHz) channels. */
|
|
struct iwl_eeprom_channel {
|
|
u8 flags; /* EEPROM_CHANNEL_* flags copied from EEPROM */
|
|
s8 max_power_avg; /* max power (dBm) on this chnl, limit 31 */
|
|
} __packed;
|
|
|
|
/* 3945 Specific */
|
|
#define EEPROM_3945_EEPROM_VERSION (0x2f)
|
|
|
|
/* 4965 has two radio transmitters (and 3 radio receivers) */
|
|
#define EEPROM_TX_POWER_TX_CHAINS (2)
|
|
|
|
/* 4965 has room for up to 8 sets of txpower calibration data */
|
|
#define EEPROM_TX_POWER_BANDS (8)
|
|
|
|
/* 4965 factory calibration measures txpower gain settings for
|
|
* each of 3 target output levels */
|
|
#define EEPROM_TX_POWER_MEASUREMENTS (3)
|
|
|
|
/* 4965 Specific */
|
|
/* 4965 driver does not work with txpower calibration version < 5 */
|
|
#define EEPROM_4965_TX_POWER_VERSION (5)
|
|
#define EEPROM_4965_EEPROM_VERSION (0x2f)
|
|
#define EEPROM_4965_CALIB_VERSION_OFFSET (2*0xB6) /* 2 bytes */
|
|
#define EEPROM_4965_CALIB_TXPOWER_OFFSET (2*0xE8) /* 48 bytes */
|
|
#define EEPROM_4965_BOARD_REVISION (2*0x4F) /* 2 bytes */
|
|
#define EEPROM_4965_BOARD_PBA (2*0x56+1) /* 9 bytes */
|
|
|
|
/* 2.4 GHz */
|
|
extern const u8 iwlegacy_eeprom_band_1[14];
|
|
|
|
/*
|
|
* factory calibration data for one txpower level, on one channel,
|
|
* measured on one of the 2 tx chains (radio transmitter and associated
|
|
* antenna). EEPROM contains:
|
|
*
|
|
* 1) Temperature (degrees Celsius) of device when measurement was made.
|
|
*
|
|
* 2) Gain table index used to achieve the target measurement power.
|
|
* This refers to the "well-known" gain tables (see iwl-4965-hw.h).
|
|
*
|
|
* 3) Actual measured output power, in half-dBm ("34" = 17 dBm).
|
|
*
|
|
* 4) RF power amplifier detector level measurement (not used).
|
|
*/
|
|
struct iwl_eeprom_calib_measure {
|
|
u8 temperature; /* Device temperature (Celsius) */
|
|
u8 gain_idx; /* Index into gain table */
|
|
u8 actual_pow; /* Measured RF output power, half-dBm */
|
|
s8 pa_det; /* Power amp detector level (not used) */
|
|
} __packed;
|
|
|
|
|
|
/*
|
|
* measurement set for one channel. EEPROM contains:
|
|
*
|
|
* 1) Channel number measured
|
|
*
|
|
* 2) Measurements for each of 3 power levels for each of 2 radio transmitters
|
|
* (a.k.a. "tx chains") (6 measurements altogether)
|
|
*/
|
|
struct iwl_eeprom_calib_ch_info {
|
|
u8 ch_num;
|
|
struct iwl_eeprom_calib_measure
|
|
measurements[EEPROM_TX_POWER_TX_CHAINS]
|
|
[EEPROM_TX_POWER_MEASUREMENTS];
|
|
} __packed;
|
|
|
|
/*
|
|
* txpower subband info.
|
|
*
|
|
* For each frequency subband, EEPROM contains the following:
|
|
*
|
|
* 1) First and last channels within range of the subband. "0" values
|
|
* indicate that this sample set is not being used.
|
|
*
|
|
* 2) Sample measurement sets for 2 channels close to the range endpoints.
|
|
*/
|
|
struct iwl_eeprom_calib_subband_info {
|
|
u8 ch_from; /* channel number of lowest channel in subband */
|
|
u8 ch_to; /* channel number of highest channel in subband */
|
|
struct iwl_eeprom_calib_ch_info ch1;
|
|
struct iwl_eeprom_calib_ch_info ch2;
|
|
} __packed;
|
|
|
|
|
|
/*
|
|
* txpower calibration info. EEPROM contains:
|
|
*
|
|
* 1) Factory-measured saturation power levels (maximum levels at which
|
|
* tx power amplifier can output a signal without too much distortion).
|
|
* There is one level for 2.4 GHz band and one for 5 GHz band. These
|
|
* values apply to all channels within each of the bands.
|
|
*
|
|
* 2) Factory-measured power supply voltage level. This is assumed to be
|
|
* constant (i.e. same value applies to all channels/bands) while the
|
|
* factory measurements are being made.
|
|
*
|
|
* 3) Up to 8 sets of factory-measured txpower calibration values.
|
|
* These are for different frequency ranges, since txpower gain
|
|
* characteristics of the analog radio circuitry vary with frequency.
|
|
*
|
|
* Not all sets need to be filled with data;
|
|
* struct iwl_eeprom_calib_subband_info contains range of channels
|
|
* (0 if unused) for each set of data.
|
|
*/
|
|
struct iwl_eeprom_calib_info {
|
|
u8 saturation_power24; /* half-dBm (e.g. "34" = 17 dBm) */
|
|
u8 saturation_power52; /* half-dBm */
|
|
__le16 voltage; /* signed */
|
|
struct iwl_eeprom_calib_subband_info
|
|
band_info[EEPROM_TX_POWER_BANDS];
|
|
} __packed;
|
|
|
|
|
|
/* General */
|
|
#define EEPROM_DEVICE_ID (2*0x08) /* 2 bytes */
|
|
#define EEPROM_MAC_ADDRESS (2*0x15) /* 6 bytes */
|
|
#define EEPROM_BOARD_REVISION (2*0x35) /* 2 bytes */
|
|
#define EEPROM_BOARD_PBA_NUMBER (2*0x3B+1) /* 9 bytes */
|
|
#define EEPROM_VERSION (2*0x44) /* 2 bytes */
|
|
#define EEPROM_SKU_CAP (2*0x45) /* 2 bytes */
|
|
#define EEPROM_OEM_MODE (2*0x46) /* 2 bytes */
|
|
#define EEPROM_WOWLAN_MODE (2*0x47) /* 2 bytes */
|
|
#define EEPROM_RADIO_CONFIG (2*0x48) /* 2 bytes */
|
|
#define EEPROM_NUM_MAC_ADDRESS (2*0x4C) /* 2 bytes */
|
|
|
|
/* The following masks are to be applied on EEPROM_RADIO_CONFIG */
|
|
#define EEPROM_RF_CFG_TYPE_MSK(x) (x & 0x3) /* bits 0-1 */
|
|
#define EEPROM_RF_CFG_STEP_MSK(x) ((x >> 2) & 0x3) /* bits 2-3 */
|
|
#define EEPROM_RF_CFG_DASH_MSK(x) ((x >> 4) & 0x3) /* bits 4-5 */
|
|
#define EEPROM_RF_CFG_PNUM_MSK(x) ((x >> 6) & 0x3) /* bits 6-7 */
|
|
#define EEPROM_RF_CFG_TX_ANT_MSK(x) ((x >> 8) & 0xF) /* bits 8-11 */
|
|
#define EEPROM_RF_CFG_RX_ANT_MSK(x) ((x >> 12) & 0xF) /* bits 12-15 */
|
|
|
|
#define EEPROM_3945_RF_CFG_TYPE_MAX 0x0
|
|
#define EEPROM_4965_RF_CFG_TYPE_MAX 0x1
|
|
|
|
/*
|
|
* Per-channel regulatory data.
|
|
*
|
|
* Each channel that *might* be supported by iwl has a fixed location
|
|
* in EEPROM containing EEPROM_CHANNEL_* usage flags (LSB) and max regulatory
|
|
* txpower (MSB).
|
|
*
|
|
* Entries immediately below are for 20 MHz channel width. HT40 (40 MHz)
|
|
* channels (only for 4965, not supported by 3945) appear later in the EEPROM.
|
|
*
|
|
* 2.4 GHz channels 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
|
|
*/
|
|
#define EEPROM_REGULATORY_SKU_ID (2*0x60) /* 4 bytes */
|
|
#define EEPROM_REGULATORY_BAND_1 (2*0x62) /* 2 bytes */
|
|
#define EEPROM_REGULATORY_BAND_1_CHANNELS (2*0x63) /* 28 bytes */
|
|
|
|
/*
|
|
* 4.9 GHz channels 183, 184, 185, 187, 188, 189, 192, 196,
|
|
* 5.0 GHz channels 7, 8, 11, 12, 16
|
|
* (4915-5080MHz) (none of these is ever supported)
|
|
*/
|
|
#define EEPROM_REGULATORY_BAND_2 (2*0x71) /* 2 bytes */
|
|
#define EEPROM_REGULATORY_BAND_2_CHANNELS (2*0x72) /* 26 bytes */
|
|
|
|
/*
|
|
* 5.2 GHz channels 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64
|
|
* (5170-5320MHz)
|
|
*/
|
|
#define EEPROM_REGULATORY_BAND_3 (2*0x7F) /* 2 bytes */
|
|
#define EEPROM_REGULATORY_BAND_3_CHANNELS (2*0x80) /* 24 bytes */
|
|
|
|
/*
|
|
* 5.5 GHz channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
|
|
* (5500-5700MHz)
|
|
*/
|
|
#define EEPROM_REGULATORY_BAND_4 (2*0x8C) /* 2 bytes */
|
|
#define EEPROM_REGULATORY_BAND_4_CHANNELS (2*0x8D) /* 22 bytes */
|
|
|
|
/*
|
|
* 5.7 GHz channels 145, 149, 153, 157, 161, 165
|
|
* (5725-5825MHz)
|
|
*/
|
|
#define EEPROM_REGULATORY_BAND_5 (2*0x98) /* 2 bytes */
|
|
#define EEPROM_REGULATORY_BAND_5_CHANNELS (2*0x99) /* 12 bytes */
|
|
|
|
/*
|
|
* 2.4 GHz HT40 channels 1 (5), 2 (6), 3 (7), 4 (8), 5 (9), 6 (10), 7 (11)
|
|
*
|
|
* The channel listed is the center of the lower 20 MHz half of the channel.
|
|
* The overall center frequency is actually 2 channels (10 MHz) above that,
|
|
* and the upper half of each HT40 channel is centered 4 channels (20 MHz) away
|
|
* from the lower half; e.g. the upper half of HT40 channel 1 is channel 5,
|
|
* and the overall HT40 channel width centers on channel 3.
|
|
*
|
|
* NOTE: The RXON command uses 20 MHz channel numbers to specify the
|
|
* control channel to which to tune. RXON also specifies whether the
|
|
* control channel is the upper or lower half of a HT40 channel.
|
|
*
|
|
* NOTE: 4965 does not support HT40 channels on 2.4 GHz.
|
|
*/
|
|
#define EEPROM_4965_REGULATORY_BAND_24_HT40_CHANNELS (2*0xA0) /* 14 bytes */
|
|
|
|
/*
|
|
* 5.2 GHz HT40 channels 36 (40), 44 (48), 52 (56), 60 (64),
|
|
* 100 (104), 108 (112), 116 (120), 124 (128), 132 (136), 149 (153), 157 (161)
|
|
*/
|
|
#define EEPROM_4965_REGULATORY_BAND_52_HT40_CHANNELS (2*0xA8) /* 22 bytes */
|
|
|
|
#define EEPROM_REGULATORY_BAND_NO_HT40 (0)
|
|
|
|
struct iwl_eeprom_ops {
|
|
const u32 regulatory_bands[7];
|
|
int (*acquire_semaphore) (struct iwl_priv *priv);
|
|
void (*release_semaphore) (struct iwl_priv *priv);
|
|
};
|
|
|
|
|
|
int iwl_legacy_eeprom_init(struct iwl_priv *priv);
|
|
void iwl_legacy_eeprom_free(struct iwl_priv *priv);
|
|
const u8 *iwl_legacy_eeprom_query_addr(const struct iwl_priv *priv,
|
|
size_t offset);
|
|
u16 iwl_legacy_eeprom_query16(const struct iwl_priv *priv, size_t offset);
|
|
int iwl_legacy_init_channel_map(struct iwl_priv *priv);
|
|
void iwl_legacy_free_channel_map(struct iwl_priv *priv);
|
|
const struct iwl_channel_info *iwl_legacy_get_channel_info(
|
|
const struct iwl_priv *priv,
|
|
enum ieee80211_band band, u16 channel);
|
|
|
|
#endif /* __iwl_legacy_eeprom_h__ */
|