linux/arch/arm/boot/compressed/head-sharpsl.S

151 lines
3.5 KiB
ArmAsm

/*
* linux/arch/arm/boot/compressed/head-sharpsl.S
*
* Copyright (C) 2004-2005 Richard Purdie <rpurdie@rpsys.net>
*
* Sharp's bootloader doesn't pass any kind of machine ID
* so we have to figure out the machine for ourselves...
*
* Support for Poodle, Corgi (SL-C700), Shepherd (SL-C750)
* Husky (SL-C760), Tosa (SL-C6000), Spitz (SL-C3000),
* Akita (SL-C1000) and Borzoi (SL-C3100).
*
*/
#include <linux/linkage.h>
#include <asm/mach-types.h>
#ifndef CONFIG_PXA_SHARPSL
#error What am I doing here...
#endif
.section ".start", "ax"
__SharpSL_start:
/* Check for TC6393 - if found we have a Tosa */
ldr r7, .TOSAID
mov r1, #0x10000000 @ Base address of TC6393 chip
mov r6, #0x03
ldrh r3, [r1, #8] @ Load TC6393XB Revison: This is 0x0003
cmp r6, r3
beq .SHARPEND @ Success -> tosa
/* Check for pxa270 - if found, branch */
mrc p15, 0, r4, c0, c0 @ Get Processor ID
and r4, r4, #0xffffff00
ldr r3, .PXA270ID
cmp r4, r3
beq .PXA270
/* Check for w100 - if not found we have a Poodle */
ldr r1, .W100ADDR @ Base address of w100 chip + regs offset
mov r6, #0x31 @ Load Magic Init value
str r6, [r1, #0x280] @ to SCRATCH_UMSK
mov r5, #0x3000
.W100LOOP:
subs r5, r5, #1
bne .W100LOOP
mov r6, #0x30 @ Load 2nd Magic Init value
str r6, [r1, #0x280] @ to SCRATCH_UMSK
ldr r6, [r1, #0] @ Load Chip ID
ldr r3, .W100ID
ldr r7, .POODLEID
cmp r6, r3
bne .SHARPEND @ We have no w100 - Poodle
/* Check for pxa250 - if found we have a Corgi */
ldr r7, .CORGIID
ldr r3, .PXA255ID
cmp r4, r3
blo .SHARPEND @ We have a PXA250 - Corgi
/* Check for 64MiB flash - if found we have a Shepherd */
bl get_flash_ids
ldr r7, .SHEPHERDID
cmp r3, #0x76 @ 64MiB flash
beq .SHARPEND @ We have Shepherd
/* Must be a Husky */
ldr r7, .HUSKYID @ Must be Husky
b .SHARPEND
.PXA270:
/* Check for 16MiB flash - if found we have Spitz */
bl get_flash_ids
ldr r7, .SPITZID
cmp r3, #0x73 @ 16MiB flash
beq .SHARPEND @ We have Spitz
/* Check for a second SCOOP chip - if found we have Borzoi */
ldr r1, .SCOOP2ADDR
ldr r7, .BORZOIID
mov r6, #0x0140
strh r6, [r1]
ldrh r6, [r1]
cmp r6, #0x0140
beq .SHARPEND @ We have Borzoi
/* Must be Akita */
ldr r7, .AKITAID
b .SHARPEND @ We have Borzoi
.PXA255ID:
.word 0x69052d00 @ PXA255 Processor ID
.PXA270ID:
.word 0x69054100 @ PXA270 Processor ID
.W100ID:
.word 0x57411002 @ w100 Chip ID
.W100ADDR:
.word 0x08010000 @ w100 Chip ID Reg Address
.SCOOP2ADDR:
.word 0x08800040
.POODLEID:
.word MACH_TYPE_POODLE
.CORGIID:
.word MACH_TYPE_CORGI
.SHEPHERDID:
.word MACH_TYPE_SHEPHERD
.HUSKYID:
.word MACH_TYPE_HUSKY
.TOSAID:
.word MACH_TYPE_TOSA
.SPITZID:
.word MACH_TYPE_SPITZ
.AKITAID:
.word MACH_TYPE_AKITA
.BORZOIID:
.word MACH_TYPE_BORZOI
/*
* Return: r2 - NAND Manufacturer ID
* r3 - NAND Chip ID
* Corrupts: r1
*/
get_flash_ids:
mov r1, #0x0c000000 @ Base address of NAND chip
ldrb r3, [r1, #24] @ Load FLASHCTL
bic r3, r3, #0x11 @ SET NCE
orr r3, r3, #0x0a @ SET CLR + FLWP
strb r3, [r1, #24] @ Save to FLASHCTL
mov r2, #0x90 @ Command "readid"
strb r2, [r1, #20] @ Save to FLASHIO
bic r3, r3, #2 @ CLR CLE
orr r3, r3, #4 @ SET ALE
strb r3, [r1, #24] @ Save to FLASHCTL
mov r2, #0 @ Address 0x00
strb r2, [r1, #20] @ Save to FLASHIO
bic r3, r3, #4 @ CLR ALE
strb r3, [r1, #24] @ Save to FLASHCTL
.fids1:
ldrb r3, [r1, #24] @ Load FLASHCTL
tst r3, #32 @ Is chip ready?
beq .fids1
ldrb r2, [r1, #20] @ NAND Manufacturer ID
ldrb r3, [r1, #20] @ NAND Chip ID
mov pc, lr
.SHARPEND: