9e23f50a76
Currently there are two different implementations (in the firmware) for the QAM demodulator command: one takes 4 and the other takes 2 parameters. The driver shows an error in dmesg When using the 4-parameter command with firmware that implements the 2-parameter command. Unfortunately this happens every time when chaning the frequency (on DVB-C). This patch simply makes configurable, how many command parameters will be used. All existing drxk_config instances using the "drxk_a3.mc" were updated because this firmware is the only loadable firmware where the QAM demodulator command takes 4 parameters. Some firmwares in the ROM might also use it. The drxk instances in the em28xx-dvb driver were also updated to silence the warnings. If no qam_demod_parameter_count is given in the drxk_config struct, then the correct number of parameters will be auto-detected. [mchehab@redhat.com: Fix a small CodingStyle issue at one comment] Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
66 lines
2 KiB
C
66 lines
2 KiB
C
#ifndef _DRXK_H_
|
|
#define _DRXK_H_
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/i2c.h>
|
|
|
|
/**
|
|
* struct drxk_config - Configure the initial parameters for DRX-K
|
|
*
|
|
* @adr: I2C Address of the DRX-K
|
|
* @parallel_ts: True means that the device uses parallel TS,
|
|
* Serial otherwise.
|
|
* @dynamic_clk: True means that the clock will be dynamically
|
|
* adjusted. Static clock otherwise.
|
|
* @enable_merr_cfg: Enable SIO_PDR_PERR_CFG/SIO_PDR_MVAL_CFG.
|
|
* @single_master: Device is on the single master mode
|
|
* @no_i2c_bridge: Don't switch the I2C bridge to talk with tuner
|
|
* @antenna_gpio: GPIO bit used to control the antenna
|
|
* @antenna_dvbt: GPIO bit for changing antenna to DVB-C. A value of 1
|
|
* means that 1=DVBC, 0 = DVBT. Zero means the opposite.
|
|
* @mpeg_out_clk_strength: DRXK Mpeg output clock drive strength.
|
|
* @microcode_name: Name of the firmware file with the microcode
|
|
* @qam_demod_parameter_count: The number of parameters used for the command
|
|
* to set the demodulator parameters. All
|
|
* firmwares are using the 2-parameter commmand.
|
|
* An exception is the "drxk_a3.mc" firmware,
|
|
* which uses the 4-parameter command.
|
|
* A value of 0 (default) or lower indicates that
|
|
* the correct number of parameters will be
|
|
* automatically detected.
|
|
*
|
|
* On the *_gpio vars, bit 0 is UIO-1, bit 1 is UIO-2 and bit 2 is
|
|
* UIO-3.
|
|
*/
|
|
struct drxk_config {
|
|
u8 adr;
|
|
bool single_master;
|
|
bool no_i2c_bridge;
|
|
bool parallel_ts;
|
|
bool dynamic_clk;
|
|
bool enable_merr_cfg;
|
|
|
|
bool antenna_dvbt;
|
|
u16 antenna_gpio;
|
|
|
|
u8 mpeg_out_clk_strength;
|
|
int chunk_size;
|
|
|
|
const char *microcode_name;
|
|
int qam_demod_parameter_count;
|
|
};
|
|
|
|
#if defined(CONFIG_DVB_DRXK) || (defined(CONFIG_DVB_DRXK_MODULE) \
|
|
&& defined(MODULE))
|
|
extern struct dvb_frontend *drxk_attach(const struct drxk_config *config,
|
|
struct i2c_adapter *i2c);
|
|
#else
|
|
static inline struct dvb_frontend *drxk_attach(const struct drxk_config *config,
|
|
struct i2c_adapter *i2c)
|
|
{
|
|
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
|
|
return NULL;
|
|
}
|
|
#endif
|
|
|
|
#endif
|