linux/arch/x86/Makefile
H. Peter Anvin 1648e4f805 x86, kbuild: make "make install" not depend on vmlinux
It is common to use "make install" in restricted environments which
differ from the one which was actually used to build the kernel.  In
such environments it is highly undesirable to trigger a rebuild of any
part of the system.  Worse, the rebuild may be spurious, triggered by
differences in the environment.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <20090415234642.GA28531@uranus.ravnborg.org>
2009-04-17 22:43:12 +02:00

200 lines
6.4 KiB
Makefile

# Unified Makefile for i386 and x86_64
# select defconfig based on actual architecture
ifeq ($(ARCH),x86)
KBUILD_DEFCONFIG := i386_defconfig
else
KBUILD_DEFCONFIG := $(ARCH)_defconfig
endif
core-$(CONFIG_KVM) += arch/x86/kvm/
# BITS is used as extension for files which are available in a 32 bit
# and a 64 bit version to simplify shared Makefiles.
# e.g.: obj-y += foo_$(BITS).o
export BITS
ifeq ($(CONFIG_X86_32),y)
BITS := 32
UTS_MACHINE := i386
CHECKFLAGS += -D__i386__
biarch := $(call cc-option,-m32)
KBUILD_AFLAGS += $(biarch)
KBUILD_CFLAGS += $(biarch)
ifdef CONFIG_RELOCATABLE
LDFLAGS_vmlinux := --emit-relocs
endif
KBUILD_CFLAGS += -msoft-float -mregparm=3 -freg-struct-return
# prevent gcc from keeping the stack 16 byte aligned
KBUILD_CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2)
# Disable unit-at-a-time mode on pre-gcc-4.0 compilers, it makes gcc use
# a lot more stack due to the lack of sharing of stacklots:
KBUILD_CFLAGS += $(shell if [ $(call cc-version) -lt 0400 ] ; then \
echo $(call cc-option,-fno-unit-at-a-time); fi ;)
# CPU-specific tuning. Anything which can be shared with UML should go here.
include $(srctree)/arch/x86/Makefile_32.cpu
KBUILD_CFLAGS += $(cflags-y)
# temporary until string.h is fixed
KBUILD_CFLAGS += -ffreestanding
else
BITS := 64
UTS_MACHINE := x86_64
CHECKFLAGS += -D__x86_64__ -m64
KBUILD_AFLAGS += -m64
KBUILD_CFLAGS += -m64
# FIXME - should be integrated in Makefile.cpu (Makefile_32.cpu)
cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8)
cflags-$(CONFIG_MPSC) += $(call cc-option,-march=nocona)
cflags-$(CONFIG_MCORE2) += \
$(call cc-option,-march=core2,$(call cc-option,-mtune=generic))
cflags-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=generic)
KBUILD_CFLAGS += $(cflags-y)
KBUILD_CFLAGS += -mno-red-zone
KBUILD_CFLAGS += -mcmodel=kernel
# -funit-at-a-time shrinks the kernel .text considerably
# unfortunately it makes reading oopses harder.
KBUILD_CFLAGS += $(call cc-option,-funit-at-a-time)
# this works around some issues with generating unwind tables in older gccs
# newer gccs do it by default
KBUILD_CFLAGS += -maccumulate-outgoing-args
endif
ifdef CONFIG_CC_STACKPROTECTOR
cc_has_sp := $(srctree)/scripts/gcc-x86_$(BITS)-has-stack-protector.sh
ifeq ($(shell $(CONFIG_SHELL) $(cc_has_sp) $(CC)),y)
stackp-y := -fstack-protector
stackp-$(CONFIG_CC_STACKPROTECTOR_ALL) += -fstack-protector-all
KBUILD_CFLAGS += $(stackp-y)
else
$(warning stack protector enabled but no compiler support)
endif
endif
# Stackpointer is addressed different for 32 bit and 64 bit x86
sp-$(CONFIG_X86_32) := esp
sp-$(CONFIG_X86_64) := rsp
# do binutils support CFI?
cfi := $(call as-instr,.cfi_startproc\n.cfi_rel_offset $(sp-y)$(comma)0\n.cfi_endproc,-DCONFIG_AS_CFI=1)
# is .cfi_signal_frame supported too?
cfi-sigframe := $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1)
KBUILD_AFLAGS += $(cfi) $(cfi-sigframe)
KBUILD_CFLAGS += $(cfi) $(cfi-sigframe)
LDFLAGS := -m elf_$(UTS_MACHINE)
# Speed up the build
KBUILD_CFLAGS += -pipe
# Workaround for a gcc prelease that unfortunately was shipped in a suse release
KBUILD_CFLAGS += -Wno-sign-compare
#
KBUILD_CFLAGS += -fno-asynchronous-unwind-tables
# prevent gcc from generating any FP code by mistake
KBUILD_CFLAGS += $(call cc-option,-mno-sse -mno-mmx -mno-sse2 -mno-3dnow,)
KBUILD_CFLAGS += $(mflags-y)
KBUILD_AFLAGS += $(mflags-y)
###
# Kernel objects
head-y := arch/x86/kernel/head_$(BITS).o
head-y += arch/x86/kernel/head$(BITS).o
head-y += arch/x86/kernel/head.o
head-y += arch/x86/kernel/init_task.o
libs-y += arch/x86/lib/
# Sub architecture files that needs linking first
core-y += $(fcore-y)
# Xen paravirtualization support
core-$(CONFIG_XEN) += arch/x86/xen/
# lguest paravirtualization support
core-$(CONFIG_LGUEST_GUEST) += arch/x86/lguest/
core-y += arch/x86/kernel/
core-y += arch/x86/mm/
core-y += arch/x86/crypto/
core-y += arch/x86/vdso/
core-$(CONFIG_IA32_EMULATION) += arch/x86/ia32/
# drivers-y are linked after core-y
drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/
drivers-$(CONFIG_PCI) += arch/x86/pci/
# must be linked after kernel/
drivers-$(CONFIG_OPROFILE) += arch/x86/oprofile/
# suspend and hibernation support
drivers-$(CONFIG_PM) += arch/x86/power/
ifeq ($(CONFIG_X86_32),y)
drivers-$(CONFIG_FB) += arch/x86/video/
endif
####
# boot loader support. Several targets are kept for legacy purposes
boot := arch/x86/boot
BOOT_TARGETS = bzlilo bzdisk fdimage fdimage144 fdimage288 isoimage
PHONY += bzImage $(BOOT_TARGETS)
# Default kernel to build
all: bzImage
# KBUILD_IMAGE specify target image being built
KBUILD_IMAGE := $(boot)/bzImage
bzImage: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(KBUILD_IMAGE)
$(Q)mkdir -p $(objtree)/arch/$(UTS_MACHINE)/boot
$(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/$(UTS_MACHINE)/boot/$@
$(BOOT_TARGETS): vmlinux
$(Q)$(MAKE) $(build)=$(boot) $@
PHONY += install
install:
$(Q)$(MAKE) $(build)=$(boot) $@
PHONY += vdso_install
vdso_install:
$(Q)$(MAKE) $(build)=arch/x86/vdso $@
archclean:
$(Q)rm -rf $(objtree)/arch/i386
$(Q)rm -rf $(objtree)/arch/x86_64
$(Q)$(MAKE) $(clean)=$(boot)
define archhelp
echo '* bzImage - Compressed kernel image (arch/x86/boot/bzImage)'
echo ' install - Install kernel using'
echo ' (your) ~/bin/installkernel or'
echo ' (distribution) /sbin/installkernel or'
echo ' install to $$(INSTALL_PATH) and run lilo'
echo ' fdimage - Create 1.4MB boot floppy image (arch/x86/boot/fdimage)'
echo ' fdimage144 - Create 1.4MB boot floppy image (arch/x86/boot/fdimage)'
echo ' fdimage288 - Create 2.8MB boot floppy image (arch/x86/boot/fdimage)'
echo ' isoimage - Create a boot CD-ROM image (arch/x86/boot/image.iso)'
echo ' bzdisk/fdimage*/isoimage also accept:'
echo ' FDARGS="..." arguments for the booted kernel'
echo ' FDINITRD=file initrd for the booted kernel'
endef